Used Bumex Sp. Z O.o. Powder Coating Furnace, 1500X4000Mm for sale (30,371)

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! Lsdpfofy Txyex Ancjaa When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Year of construction: 2020, condition: new, Touch control ROMER cabins are equipped with 4 "color touch displays. Operation of the cabin is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual Filter clogging sensor A sensor is installed in the cabins, which queues the filters for cleaning when they become clogged. The system also informs you when the filters have worn out Automatic filter cleaning The electronic system for automatic filter cleaning has a range of cleaning frequency and shot time adjustment. Each of the filters is cleaned separately, the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Lodpfx Aefzciqjncjaa Low volume Aluminum fans are very quiet, they work at the level of 74-79dB - It's not much. with the standard cabin structure, it's even hard to talk. Broaching machine through the cabin By dragging the suspension beams within the cabin, the cabin improves work efficiency, thus relieving the painter who no longer has to move them by hand. Explosion-proof design The booths are designed to prevent the formation of an explosive mixture during the painting process. Each of the components has been carefully selected to minimize this risk.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. Ledpfsfz Nb Tox Ancjaa This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. Ljdjfz U S Espfx Ancoaa The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, 7" Touchpad Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters.Memory 20 programs each with 10 events You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process.Information about consumption of power Laedpfx Anjfz U Tiocoa Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost of the cycle, consumption and plan check staff.Recorder of cycle USB Each of the ovens is equipped with two-channel temperature recording on USB flash drive.. Each file is automatically created and is responsible for a separate cycle are recorded temperature extremes, hour and minute measurement. Files are saved in * .csv (Excel sheet) For all buyers the end of 2016 option is free, the competition for the option you have to pay up to several thousand euros. History 20 latest of burn Something's wrong? and perhaps too few overbroad elements from the oven? Now you check thoroughly oldest and lastest burning parameters, how often took, whether cycle proceeds without any problems, what was the consumption and when they ran. Start the oven automatically at 6 am How many times have you stay after hours and expecting end of the cycle? If you own a powder coating plan that works for a long time, You know exactly what we are talking about. With our solution you can leave cycle not cured in the oven, to automatically end when you come to the job next morning.

Condition: new, functionality: fully functional, Year of construction: 2025, Detailed Specification: Ljdpfx Aexna U Uencjaa - Internal dimensions: 5500 × 1500 × 2300 mm (L × W × H) - External dimensions: 5700 × 1900 × 2700 mm (L × W × H) - Entrance doors: Double-wing, 1700 × 2300 mm (W × H) - Wall panels: Thickness 100 mm, width 950 mm, tongue-and-groove structure; steel sheet 0.5 mm with mineral wool insulation inside - Box: Panels 100 mm thick, filled with mineral wool - Heating system: RIELLO oil burner model 40G20; heating capacity 200,000 Kcal/h; heat exchanger made of 2 mm stainless steel - Maximum heating output: 200,000 Kcal/h, total 1 set - Roof: Panels 100 mm thick with mineral wool insulation inside - Control system: Heating control, time setting, fault indicator, emergency stop, hour counter, temperature limit regulator, total operating hours display - Total power: 6 kW - Overhead conveyor system: 4 tracks; maximum load 400 kg each We can manufacture ovens of any required dimensions. We provide complete systems including transport traverses, spray walls, and powder coating guns — as shown in the photos.

Condition: like new (used), Year of construction: 2025, operating hours: 8 h, functionality: fully functional, total length: 7,000 mm, total height: 3,000 mm, total width: 2,600 mm, warranty duration: 12 months, 🟦 Semi-automatic Powder Coating Plant – Compact Container System Modern semi-automatic powder coating line built in a container-type enclosure, consisting of a powder coating booth, curing oven, and automatic transport system. This unit is a compact and mobile solution designed for coating small metal parts — ready for operation anywhere after connecting to power supply. Ideal for production companies, workshops, or service providers looking for an efficient and flexible coating system. 🔹 Technical Specifications CURING OVEN - Working chamber dimensions: 4000 x 700 x 1300 mm (L x W x H) - Heating power: 24 kW Laodpjxlr Emsfx Ancea - Motor: 2.5 kW, 1500 rpm - Radial fan capacity: 4500 m³/h - Thermal insulation: 150 mm - Maximum temperature: 250°C POWDER COATING BOOTH - Working chamber dimensions: 2000 x 600 x 1400 mm (L x W x H) - Filtration unit: * Motor: 2.2 kW, radial fan 12,500 m³/h * Two conical polyester filters L600 * Twist-type filter mounts * Pneumatic powder cleaning system with adjustable cyclic discharge AUTOMATIC TRANSPORT SYSTEM - Travel length: 11,500 mm - Hanger spacing: 250 mm - Number of hangers: 45 pcs - Maximum speed: 4 m/min - Motor power: 0.75 kW 🔸 Features and Advantages * Compact container design – easy to transport and quick to install * Low energy consumption and small footprint * Continuous process ensured by automatic conveyor system * High-efficiency filtration system * Fully equipped “plug & play” unit – ready to start immediately

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1306/2013-07, A fully equipped industrial powder coating booth is now available for sale, ideal with optional motor and automatic filter cleaning: • Dimensions (external): 1850 × 1600 × 2600 mm • Extracted air volume: 3,000 m³/h • Motor: approx. 1.5 kW • Filter cartridges: 2 pcs + automatic cleaning • Electric connection: 3 × 380 V/220 V, 50 Hz • Air velocity: 0.2–0.5 m/s Lajdpfx Asw Nv Axoncoa • Maximum suspension size: 250 mm × 1000 mm • Spray opening: 1100 × 1100 mm Accessories: • Sheet metal housing with transparent panel • Extraction ventilation + silencer • Compressed air tank + preparation unit • Automatic filter cleaning, powder recirculation container • EU-standard control cabinet, pneumatic system + airflow sensor 🟢 Condition: • Good technical condition, well-maintained • Documentation and fully operational system 💰 Asking price: 5,200 EUR + VAT

Condition: good (used), Year of construction: 1990, functionality: fully functional, For sale is a complete, fully operational powder coating system, year of manufacture 1990. Over the past few years, numerous system components have been modernized or completely replaced and upgraded. The system was decommissioned in Q1-2025, but can be reactivated and operated at any time if required. All components remain on standby and can be started up and demonstrated on site. The system features one manual and two automatic spray booths (which can be operated simultaneously). The maximum workpiece dimensions that can be coated across all booths are 7000x2300x800 mm. The entire conveyor system is supplied by CSF. All system controls, including a visualization system, all control cabinets, all frequency inverters, as well as many other components have been completely renewed within the last 5–7 years. There is no maintenance backlog; the system has been regularly and meticulously serviced by our own maintenance department and the respective manufacturers. A detailed description can be provided upon request. Price on request! Laedpfx Ajw Ek Ntoncea

Condition: new, Year of construction: 2025, SAPI Powder Coating The perfect layer for lasting protection. Powder coating is a highly effective and widely used method for applying a protective and decorative finish to various types of surfaces. It is a dry finishing process in which a fine powder composed of resin, pigments, and additives is applied to a substrate. The powder is electrostatically charged so that it adheres evenly to the surface, forming a uniform coating. To achieve optimal adhesion and durability, the substrate is first thoroughly cleaned and prepared. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for the powder to bond effectively to the substrate and achieve a strong and long-lasting coating. A powder coating system typically consists of various components and equipment required for the application and curing of powder coatings. SAPI_Powder_spray_gun Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures even powder distribution. Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. Powder Feed System The powder feed system consists of a hopper or container in which the powder coating material is stored. It typically includes equipment such as powder pumps, feed hoses, and powder screens to transport the powder from storage to the spray gun. Lsdpswf Dpgsfx Ancsaa Pretreatment Equipment Pretreatment equipment is used to prepare the substrate before the powder coating is applied. This may include processes such as cleaning, degreasing, rinsing, and surface treatment to ensure good adhesion and durability of the coating. Curing Oven A curing oven is an essential component of a powder coating system. It is used to heat the coated substrate to the correct temperature so that the powder coating can melt, flow, and cure into a durable finish. The oven typically consists of a conveyor system or racks to transport the coated parts through the oven chamber. Exhaust system An exhaust system will be installed in the facility to extract excess powder, fumes, or volatile compounds generated during the coating process. This system helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air.

Condition: new, SAPI Powder Coating The Perfect Coating for Lasting Protection. Powder coating is a highly effective and widely used method for applying a protective and decorative surface to various types of substrates. It is a dry finishing process where a fine powder made of resins, pigments, and additives is applied to a substrate. The powder is electrostatically charged, allowing it to adhere evenly to the surface and form a uniform coating. To achieve optimal adhesion and durability, the substrate is thoroughly cleaned and prepared first. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for ensuring that the powder bonds effectively to the substrate, creating a strong and long-lasting coating. Components of a Powder Coating System A typical powder coating system consists of several components and devices required for applying and curing the powder coating. Spray Booth and Spray Area Ledpfx Ajun Sd Ujncoaa The booth provides a clean environment for the application process and ensures an even distribution of the powder. 🎨 Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. 💨 Powder Feed System The powder feed system consists of a hopper or container where the powder coating material is stored. It typically includes devices like powder pumps, feed hoses, and powder sieves to transport the powder from storage to the spray gun. 🔄 Pre-treatment Equipment Pre-treatment systems are used to prepare the substrate before applying the powder coating. This can include processes like cleaning, degreasing, rinsing, and surface treatment to ensure proper adhesion and durability of the coating. 🧼 Curing Oven A curing oven is a crucial component of a powder coating system. It is used to heat the coated substrate to the correct temperature so the powder coating melts, flows, and hardens into a permanent surface. The oven usually consists of a conveyor system or racks to transport the coated parts through the oven chamber. 🔥 Exhaust System An exhaust system is installed to remove excess powder, fumes, or volatile compounds generated during the coating process. It helps maintain a clean and safe work environment for the personnel and prevents the accumulation of powder particles in the air. 🌬️ Looking for a Powder Coating Solution? Are you searching for a custom powder coating solution? We specialize in providing tailored powder coating solutions to meet your individual needs. Whether you have specific color requirements, complex designs, or challenging substrates, our experienced team is ready to deliver exceptional results. 💡 Contact us today to discuss your requirements, and let us develop a custom powder coating solution for you. 📞 Get in touch with us today!

Condition: new, I am offering a brand new Siemens SIMOTICS motor (1FE series) – a professional servo/spindle motor designed for inverter duty. This is a high-grade industrial motor, commonly used in CNC machine tools, delivering high power, precision, and reliability. The motor comes from warehouse stock (New Old Stock – NOS), unused and stored in original Siemens packaging. ⚙️ Technical Data Manufacturer: Siemens Series: SIMOTICS Lodpfx Ajyxqmxencsaa Model: 1FE1114-6WW11-1BN2-Z-T56 Power: 20.9 – 26.8 kW Voltage: 425 V Current: 58 / 85 A Nominal speed: 1000 rpm Max speed: 6000 rpm Max torque: 330 Nm Duty cycle: S1 / S6-40% Cooling: water-cooled Temperature sensor: KTY84-130 Protection rating: IP00 Insulation class: F (155°C) 📦 The set includes: Siemens SIMOTICS motor Original Siemens packaging (as shown in the pictures) 📌 Key advantages: ✔️ Condition: NEW (warehouse stock / NOS) ✔️ Made in Germany ✔️ Genuine Siemens industrial quality ✔️ Ideal for CNC / machine tools / automation ✔️ High power and torque

Condition: new, For sale: Professional Proval PA125DA pneumatic actuator with complete control equipment. The set includes a pneumatic actuator, IMI Herion solenoid valve, and J J limit switch box in ATEX version. The device comes from warehouse stock, in brand new and unused condition. Technical Data: Manufacturer: Proval Model: PA125DA Type: Double-acting pneumatic actuator Lodjyvabxjpfx Ancjaa Rotation angle: 90 degrees Operating pressure: 2 to 8 bar Connection: G 1/4 Temperature range: minus 20 to plus 80 °C Standard: ISO F07, F10 Equipment: IMI Herion solenoid valve 230V 50Hz J J ATEX IP67 limit switch box Complete set ready for installation Condition: New, warehouse stock Possible minor storage marks Price per piece

Condition: good (used), Step clamps, clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools -Clamping heights: 15-240 mm -for: 12 mm groove width -Quantity: 15x available Laedpfxob A Rlhj Ancea Price: complete -Dimensions: 500/320/H200 mm -Weight: 30 kg

Condition: new, Catalogue number: S 0335 - New machine, in stock - CE certificate SURFACE PLANER: - Working table dimensions: 1500 х 320 mm - Max. planing depth: 5 mm - Aluminium guide fence dimensions: 1100 x 155 mm THICKNESS PLANER: - Working table dimensions: 316 x 600 mm - Max. planing depth: 3 mm - Feed speed: 7 m/min - Material thickness: 4 - 230 mm - Motor power: 3 kW Lajdoyg Iwcopfx Ancsa - Cutterhead speed: 5600 min⁻¹ - Dimensions (L/W/H): 1500/600/1050 mm - Weight: 315 kg * Cast iron tables with ground surface * Tables with precise adjustment for longitudinal planing * Stable aluminium fence adjustable from 90° to 45° * Cutterhead guard * Thickness planer table with central guide column and support * Power on/off without stopping the machine * Mortiser with left-hand rotation Net price: 14,500 PLN Net price: 3,440 EUR Price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, empty load weight: 4,060 kg, maximum load weight: 6,440 kg, overall weight: 10,500 kg, axle configuration: 1 axle, first registration: 01/2018, loading space length: 7,450 mm, loading space width: 2,470 mm, loading space height: 3,100 mm, loading space volume: 57 m³, suspension: air, tire size: 235/75R17,5, color: other, gearing type: other, front tire size: 235/75R17,5, rear tire size: 235/75R17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, , -- Misprints, errors and omissions excepted, sample pictures --, More details under: !, More Details: ! Lsdpfoy Dkbaex Ancjaa

Condition: used, functionality: fully functional, This listing is for a second-hand DTF/DTG printer, the ‘Brother GTX-423 pro’ Item for sale: 1 x Brother GTX-423 pro with the following features: Includes Schulze KN-800 drying tunnel Includes Schulze Powder Machine 4050 Meter readings: Total: Approx. 4,121 pages Condition: This is a second-hand device, which may show signs of wear (minor scratches or discolouration). Ledjy Aluljpfx Ancoaa The machine has been tested for functionality A test printout can be seen in the photo Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment for this! Sea-worthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: excellent (used), mileage: 1,130,000 km, power: 340 kW (462.27 HP), first registration: 12/2011, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 870 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro5, suspension: steel-air, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 13,000 kg, Year of construction: 2011, Equipment: ABS, AdBlue, cruise control, differential lock, electric window regulation, parking heater, power mirror, retarder, seat heater, traction control, = Additional Options and Equipment = - 2 Beds - 870 Liter Fuel Tank - ADR/VLG Certification - Aluminum Fuel Tank - AS-TRONIC Transmission - Heated Mirrors - Driver Comfort Seats - Differential Lock - Differential Lock - High Beam - Speed Limiter - Main Power Switch - Refrigerator Under Bed - Alloy Wheels - Multifunction Steering Wheel - Radio/CD Player - Sleeper Cab - Sun Visor - Auxiliary Heater (Parking Heater) - Power Take-Off (PTO) - Power Take-Off (PTO) - ZF Intarder Ledpfx Ajy D Aghoncoaa = Remarks = NICE CONDITION DAF FTXF105-460 SPACECAB 4x2 TRACTOR UNIT WITH AUTOMATIC GEARBOX, ZF-INTARDER / ADR-VLG, P.T.O. & AIR CONDITIONING!! 460HP, EURO 5!! AS-TRONIC (12 SPEED)!! ZF-INTARDER!! ADR / VLG (AT-FL / EXII / EXIII / OX)!! ELECTRIC MAIN SWITCH!! P.T.O.!! 870 LITER DIESEL TANK!! AIR CONDITIONING!! SUN VISOR!! ETC!! TRUCK IS IN NICE & CLEAN CONDITION, READY FOR THE JOB!! MORE DAF CF/XF EURO 2/3/4/5/6 IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! SHIPMENT, TRANSIT REGISTRATION, STACKING, LOADING OR TRANSPORT? NO PROBLEM FOR US, WE ARE A "ONE STOP SHOP" COMPANY!! PLEASE CHECK OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ( ) YOU CAN ALSO CHECK OUR WEBSITE; ENGEL TRUCKS B.V.; "YOUR GLOBAL TRADING PARTNER" = More Information = Technical Information Number of Cylinders: 6 Engine Displacement: 12,902 cc Transmission Gearbox: AS-TRONIC (12 SPEEDS) + ZF-INTARDER, 12 gears, automatic Axle Configuration Brakes: Disc brakes Front Axle: Tire size: 385/65R22.5; Alloy rims; Max. axle load: 7,500 kg; Steering; Tire tread left: 40%; Tire tread right: 40%; Suspension: leaf spring Rear Axle: Tire size: 315/70R22.5; Twin tires; Differential lock; Alloy rims; Max. axle load: 13,000 kg; Tire tread inner left: 50%; Tire tread outer left: 50%; Tire tread inner right: 50%; Tire tread outer right: 50%; Reduction: single reduction; Suspension: air suspension Weights Unladen weight: 7,770 kg Payload: 11,230 kg Gross vehicle weight: 19,000 kg Functional Cargo Space Volume: 870 l Load floor height: 120 cm Condition Technical condition: very good Optical condition: very good Further Information Contact the Sales Department for more information.

Condition: used, empty load weight: 4,060 kg, maximum load weight: 6,440 kg, overall weight: 10,500 kg, axle configuration: 1 axle, first registration: 01/2019, loading space length: 7,460 mm, loading space width: 2,480 mm, loading space height: 3,080 mm, loading space volume: 56 m³, suspension: air, tire size: 235/75R17,5 143/141L, color: other, gearing type: other, front tire size: 235/75R17,5 143/141L, rear tire size: 235/75R17,5 143/141L, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, , -- Misprints, errors and omissions excepted, sample pictures --, More details under: !, More Details: ! Ljdpfx Ajyy Uw Djncoaa

Condition: used, all stainless steel dimensions: ± 5.000 x 2.200 x 2.700 mm drum diameter: 1.300 mm net drum length 4.200 mm adjustable inclination angle easy to clean inlet height: ± 1.700 mm (adjustable if necessary) discharge height: ± 1.000 mm power 3kW 400V, 50Hz 4 spray pipes Provided for extraction Ledoyx Dniopfx Ancjaa

Year of construction: 2026, condition: new, ceramic ball mill ,Batch ball mill ,also called ceramic ball mill ,it is used for fine grinding of feldspar,quartz,clay,ore and so on.The ceramic ball mill is mainly used for material mixing, grinding,uniform product fineness,and saving power.It can be dry or wet.The machine can use different liner types according to production needs to meet different needs.The fineness of the grinding operation is controlled by the grinding time ceramic ball mill Working principle when ball mill working,steel balls inside drum will rotate with the drum to some height,and then steel balls fall down with materials to reach the point of grinding. Working Principle of Ceramic ball mill Lsdpfx Anevzx Aueceaa ceramic ball mill ,Intermittent ball mill grinding operation is finished in the cylinder body. When the cylinder rotates, materials ascend to a certain height and then fall along a certain path due to the balls' gravity. Two forces are generated on the balls inside. One is the force on balls through tangent direction; the other is a opposite force in the contrast to the diameter of balls, as a result of the force generated when the balls slide down. These two forces will constitute a couple for the steel balls. The balls are squeezed between the cylinder and the adjacent steel balls, so the couple can make unequal-sized friction force. The balls will orbit along with the cylinder axis and then fall down, which can produce a strong impact force on the ores in the cylinder body and, as a result, the ores will be crushed. In conclusion, the ores in the cylinder body are mainly crushed by composite effect of peeling force, impact force and extrusion force. Ceramic ball mill also named Intermittent ball mill which adopts the wet intermittent operation, is used for fine grinding and mixing the material such as feldspar, quartz, clay ceramic raw materials. The discharging and the mud size can through through 1000 sieve pore. This machine is high milling machinery, materials should be Broken in the fineness of the state into the grinding mill to get the highest efficiency and economic benefits. The cement mill is key equipment for the grinding process of the cement clinker after the crushing process of it. It is mainly used in the cement silicate product industry. After long term design and manufacture of the cement mill, our company now has series of cement mill with various specifications to meet with different requirement from our customers. Features of Cement Mill Our company adopts suitable transmission methods according to different specifications. We have brim drive and center drive as transmission form. The cylinder adopts new type step lining to increase the grinding area. And it is easily repairable and changeable. The new designed separate-chambered structure adopts flexible lifting blade and fixed lifting blade and it is easily fixed and repaired. Technical Details We have different models and options for different requirements, please contact us for more info.

Condition: used, functionality: fully functional, machine/vehicle number: FN394919, Year of construction: 2009, operating hours: 16,000 h, load capacity: 2,000 kg, lifting height: 4,500 mm, free lift: 1,400 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,060 mm, battery manufacturer: SBS, battery model: PB, battery capacity: 750 Ah, remaining battery capacity: 75 %, battery voltage: 48 V, battery weight: 1,013 kg, fork length: 1,200 mm, tire condition: 10 %, front tire type: cushion tires (non-marking), rear tire type: cushion tires (non-marking), empty load weight: 3,300 kg, Equipment: all wheel drive, pallet forks, trailer coupling, The machine is equipped with a box turning device. Ljdpfx Anoyymunscoaa

Condition: used, ZINC-COATING PLANT FOR PIPES , made by VOEST ALPINE / LOECO Maximum capacity: 60.000 t/year (16 t/h) Lasdpeyman Hjfx Ancsa Producible dimensions: ¼” to 4” Producible lengths: 4 to 7 m Zn layer: 400 g/m2 according to DIN 2444 Maximum capacity: 60.000 t/year (16 t/h) Producible dimensions: ¼” to 4” Producible lengths: 4 to 7 m Zn layer: 400 g/m2 according to DIN 2444

Condition: used, mileage: 10,000 km, power: 310 kW (421.48 HP), color: blue, gearing type: automatic, Year of construction: 2023, Equipment: ABS, airbag, central locking, power assisted steering, seat heater, - Passenger airbag - Electronic window regulator - left - Electronic window regulator - right - Driver airbag Lodpfoyf Hdfjx Anceaa - To ensure you receive the best possible advice, we kindly ask you to arrange an appointment. Mr. D. Neidhart and Mr. J. Ebert will be pleased to assist you. G MANUFAKTUR SOUTH SEA BLUE METALLIC, G MANUFAKTUR EXTERIOR, G MANUFAKTUR INTERIOR, G MANUFAKTUR PAINTS, G-ICONS EXTERIOR KIT, SPECIAL PAINT FINISH, DRIVER ASSISTANCE PACKAGE PLUS, TECHNOLOGY PACKAGE, EXTENDED NIGHT PACKAGE EXTERIOR, NIGHT PACKAGE, FRESH AIR PACKAGE, ACTIVE MULTICONTOUR SEAT PACKAGE PLUS, PARKING PACKAGE, ANTI-THEFT PACKAGE PLUS, PROFESSIONAL EXTERIOR, DARKENED HEADLIGHTS, 360° CAMERA (SURROUND VIEW SYSTEM), BURMESTER 3D SURROUND SOUND SYSTEM, AUXILIARY HEATING, SPORTS EXHAUST SYSTEM, BLACK BADGING AND MB LOGO, I-SIZE MARKING (ISOFIX SUCCESSOR), MANUFAKTUR NAPPA LEATHER SEATS TWO-TONE, MANUFAKTUR NAPPA LEATHER MF TWO-TONE PLATINUM WHITE/BLACK, ADAPTIVE DAMPING, ACTIVE LANE KEEPING ASSIST, TECHNICAL UNDERBODY PROTECTION IN BLACK, RADIATOR GRILLE PAINTED BLACK, BUMPERS AND FENDER FLARES IN BLACK, MB STAR FRONT/REAR IN BLACK, BLIND SPOT ASSIST, DAB RADIO, COMAND ONLINE, SMARTPHONE INTEGRATION CARPLAY, SMARTPHONE INTEGRATION GOOGLE AUTOMOTIVE, LOGO PROJECTION VIA EXTERIOR MIRRORS, PARKTRONIC, DISTRONIC PLUS, ELECTRIC GLASS SUNROOF, HEATED WINDSCREEN, ROOF RACK, FRAMELESS INTERIOR REARVIEW MIRROR, DINAMICA MICROFIBER HEADLINER IN BLACK, AMBIENT LIGHTING DESIGN, MIRRORS IN BLACK, EDW WITH TOW-AWAY PROTECTION AND INTERIOR MONITORING, COLLISION PREVENTION ASSIST, TRAFFIC SIGN ASSIST, LEATHER-CLAD INSTRUMENT PANEL, PRE-SAFE SYSTEM, ATTENTION ASSIST, HEATED STEERING WHEEL, ENERGIZING COMFORT CONTROL, TOW BAR, SPARE WHEEL ON TAILGATE, LOOP DESIGN, SEAT COMFORT FUNCTIONS, SIDEBAGS IN THE REAR SEAT BENCH, REAR SEATBELT STATUS INDICATOR, DECORATIVE TRIM WITH MANUFAKTUR LETTERING, GRAB HANDLES IN HEADLINER AND LEATHER-CLAD TAILGATE, HEAT-INSULATING DARK-TINTED GLASS, MB CONNECT SERVICES FOR NAVIGATION, MB CONNECT SERVICE FOR OFFICE AND COMMUNICATION, MB CONNECT SERVICES FOR VEHICLE SETUP (HERMES), MB CONNECT VEHICLE MONITORING (HERMES), 1st hand (German vehicle), former new car price was €171,110. We are happy to provide a trade-in offer for your used vehicle. If you wish to lease or finance your vehicle, we would be pleased to provide you with an individual offer. Subject to errors and prior sale. - Metallic paint, sunroof, alloy wheels, electronic immobilizer, ESP, navigation system, full service history, auxiliary heater, warranty, rain sensor, sports seats, electric side mirrors, Bluetooth, onboard computer, electric seat adjustment, hands-free kit, multifunction steering wheel, ski bag, Isofix, light sensor, fog lamps, traction control, non-smoker vehicle, start/stop automatic, lane keeping assist, emergency braking assist, blind spot assist, seat ventilation, alarm system, armrest, heated windscreen, leather steering wheel, lumbar support, massage seats, fatigue warning, emergency call system, tire pressure monitoring, gearshift paddles, sound system, voice control, USB, traffic sign recognition, winter package, distance warning, ambient lighting, WLAN / WiFi hotspot, Apple CarPlay, Android Auto, fully digital instrument cluster, auto-dimming interior mirror, speed limiter, ...

Condition: used, Inserts, hand reamers, reamer, reaming tool, fitting knife cutting set -Type: SP-AZ93R6 -Dimensions: 22x7x3 mm -Inserts: for reamers Ljdpedkpaxefx Ancsaa -Number: 11 packages available -Price: per piece