Used Bohrer Sl 70 for sale (14,840)

Condition: as good as new (ex-display), Year of construction: 2024, Technical specifications: Iaedpfxjb Eln Do Aa Ejw Laminated panel press from our showroom; Working area: width from 150 - 2,550 mm, height from 150 - 1,400 mm, depth from 150 - 700 mm; Variable pressure adjustment 300/700/1100/1400/1800/2200 dN (kg) of the side pressing beam; Variable pressure adjustment 500/800/1200/1500/1900/2200 dN (kg) of the top pressing beam. Simple operation via 6 separate push buttons, freely adjustable pre-selection of pressing time with automatic opening function, loading height 300 mm. The machine is in our showroom and can be delivered immediately. Location: available from our warehouse in 54634 Bitburg.

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Iedpfx Aow Sgnkja Eoaw Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Lamella – Carcase Press with Rapid Traverse Technical specifications: Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm, depth 700 mm; - Upper lamella pressing beam with 6 elements, side lamella pressing beam with 5 elements - Lamella pressing beams with field-proven tolerance compensation for tightly pressed carcase joints - Counter-pressure surfaces are continuous, coated support plates, 40 mm thick - The pressing force of the pressing beams is infinitely variable via two potentiometers and set electronically via frequency converter, ensuring absolutely wear-free torque transmission. Iodpfey Egz Ssx Aa Eeaw - Pressing force for horizontal pressing beams: min. 500 daN (kg) up to infinitely adjustable 2,200 daN (kg) max. - Pressing force for vertical pressing beams: min. 300 daN (kg) up to infinitely adjustable 2,200 daN (kg) max. - Including option: Rapid traverse speed for quick positioning of the pressing beams, controlled by automatic workpiece detection with sensors in the pressing beams; pressing speed 5/10/25 mm/sec and rapid traverse speed 50 mm/sec. Sensors can be deactivated for pressing special parts. - Jog mode for precise positioning of both pressing beams, e.g., for low pressing forces, drawers, and carcases at 45 degrees. Easy operation via six separate push buttons, freely adjustable pressing time preselection with automatic opening feature, loading height 300 mm. The machine is available from our showroom and can be delivered immediately. Location: ex-stock 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Iaedpfxeiidm No Aa Ejw Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Condition: excellent (used), mileage: 42,000 km, power: 213 kW (289.60 HP), first registration: 01/2019, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, gearing type: mechanical, emission class: euro6, Year of construction: 2019, Equipment: air conditioning, = Additional Options and Accessories = - Air suspension Iasdpoyxn Uasfx Aa Esw - Rear view camera - Sun visor = Further Information = Front axle: Steerable GVWR: 18,000 kg Technical condition: very good Optical condition: very good Price: Upon request

Condition: new, Axesta Grossenbacher Axis Control IEEE 488 / 50 70 086, serial number: 9705180044, unused, 100% functional, scope of delivery as shown in the photos. Iajdpei D T A Aofx Aa Eew

Condition: new, Axesta 50 70 086 Axis Control, Serial No.: 9705180034, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Iaodpei D T Aqefx Aa Ejw

Condition: new, Axesta Grossenbacher Input 40x24VDC / 50 70 360, Serial No.: 9807602063, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Iaodsi D T A Hjpfx Aa Ejw

Condition: new, Fortuna FAVY 70 L 220.319 grinding spindle, serial number: 207060, unused, 100% functional, scope of delivery as shown in the photos. Iedpji D U Rajfx Aa Eeaw

Condition: new, Fortuna FAVY 70 L, serial number 220.319, grinding spindle, SN: 207059, unused, 100% functional, scope of supply as shown in the photos. Iasdpfji D U N Sjx Aa Eew

Condition: used, Bündelpresse / Bundle Press SPLEK SL 82B-300 Baujahr / Year 1996 - Serial-No. 1589 Pressplattengrösse  / Press Plate Size max. 220mm (high) x 330mm (width) Einsatzlänge / Insert length 770mm Stapel Presskraft maximal 20KN Geeignet zum Pressen und Bündeln von gefalzten Bogen, Broschüren, Buchblocks sowie Kartonagen. For Pressing and Bundling of Folded Sheets, Brochures, Book bBlocks and cardboards. Iodpfx Aew Nhc Rea Ejaw Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Foil Stamping & Embossing Machine Kolbus PE 70 with automatic Feeder and Pre-stacking conveyor. Heißfolienpräge- & Prägemaschine / Foil Stamping & Embossing Machine Kolbus PE 70 Baujahr / Year 1979 - Serial-No. 178 Open cover size  min.170 x 100mm - max. 660 x 405mm Iajdpfx Aoydfwzoa Eow Printing surface 420 x 355mm Pressing power 35 tons Geschwindigkeit / Speed max. 70 cycles/min. Vorstapel Föderband / Case Pre-stacking conveyor Anleger für Buchdecken / Feeder for cases Deckenausbiege Station / Case bending station Folientransportvorrichtung / Foil transporting device Folienabwickelvorrichtung / Foil unwinding device Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used,  Schuppenauslage mit integrierter Presseinrichtung / Mobile delivery with pressing device Heidelberg SPH-70 Iaedoyldg Ropfx Aa Eow Schuppenauslage mit Presseinrichtung / Stream delivery with pressing device Heidelberg SPH-70 Baujahr / Year 2016 - Serial-No. 1224446842 Size min. 40 × 75mm - max. 700 x 1000mm Produktdicke / Product thickness max. 4 mm Presskraft / Pressing force 12.000N Anzahl der Nutzen / Standard no. of UPS max. 2 - 4 Einlaufhöhe / Infeed height 400 - 1000mm Steuerung MCT1 Bedienpult mit Display MCT control system1 control panel with display Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 1980, Used machine Year of manufacture: 1980 Features and technical data: - Lock case milling unit - Handle hole borer - Face plate milling cutter - 1.5 kW motor - 2800 rpm Availability: short-term Ijdszk N Aaepfx Aa Eoaw Location: 63934 Röllbach

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Tabletop machine The zig-zag thread used as the adhesive medium is applied from below Automatic thickness and tolerance compensation for measured veneers Veneer from approx. 120 mm length, 35 mm width and a thickness of 0.3 - 2 mm Electrical connection: 230 V Throat depth: 700 mm Material feed approx. 6 m/min. Weight: approx. 54 kg Availability: short-term Storage location: Flörsheim Isdpfxezk N D Rs Aa Eoaw

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for workpieces with an edge thickness of up to 100 mm! Condition: factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 rollers for better workpiece guidance - Edge feed, operating in synchrony with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with cutter (for edges that can be cut) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber backing - Digital counter for height adjustment - Direct glue application to the workpiece: Glue tank is leak-proof with glue reservoir from below and fast heating time after machine shutdown - Edge trimming unit: - for the front and rear edges of the workpiece - automatic scanning of the workpiece - pneumatic trimming with cutter for edges that can be cut - Edge milling unit - with vertical scanning and horizontal guidance - reproducible adjustment via digital counters - 2 high-performance 0.4 kW high-frequency motors - continuously adjustable from 4000 to 18000 rpm - Milling cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction port Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter with the belt feed - Workpiece support, continuous, approx. 1800 mm long - Workpiece support rail, approx. 300 mm extendable - Rotatable film plate Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 - 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 - 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Heating power of glue tank: 2.7 kW - Heating time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400 V, 50 Hz, 3-phase + N - Total connection: 3.8 kW - Pneumatic connection: 6 bar Dimensions (without film plate): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short notice Location: Flörsheim Iasdpfozk Nmrjx Aa Esw

Condition: good (used), Code: 0028 Brand: OMG Model: EPM/70 Automatic slotting machine for blinds Technical data Spindle connection mm 10 Drill speed 12000 rpm Iaodpfxexvxpge Aa Eow Simultaneous machining of 2 sections 18 possible pitches with a single toothed rod Slots depth up to 25 mm Drill motor Hp 1,5 Slide motor Hp 1 Up to 20 slots / minute Inclination from from 90 degrees (vertical) to 0 degrees (horizontal) Max section dimensions mm 100 x 120 Automatic stop Overall dimensions: machine mm 1500 x 1000 x 1200 h - kg 490 - Rack mm 3200 x 100 x 200 h - kg 30

Condition: used, Year of construction: 2020, operating hours: 8,051 h, lifting height: 3,650 mm, fuel type: gas, mast type: duplex, fork length: 2,000 mm, fork width: 1,210 mm, total height: 2,700 mm, total length: 4,020 mm, total width: 1,380 mm, color: silver, Empty weight: 6.200 kg Lifting capacity: 4.000 kg - Year: 2020 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 517335Y00005 - Operating hours: 8051 Iasdezk Ia Ropfx Aa Eow - Lifting capacity: 4000kg - Lifting height: 3645mm - Overhead clearance: 2700mm - Fork length: 2000mm - Maximum fork width: 1210mm - Minimum fork width: 260mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Full cabin, Work lights, Joystick - Mast: Duplex - Drive: LPG - Motor brand: Linde - Transport dimensions: 4027mm x 1380mm x 2700mm (l x w x h) - Transport weight [kg]: 6200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: good (used), Year of construction: 2001, functionality: fully functional, Circumferential diameter: 190 mm Turning length: 180 mm Turning diameter: max. 100 mm Z-axis: 195 mm X-axis: 125 mm Spindle bore: 43 mm Spindle bearing diameter: 80 mm Tailstock diameter: 40 mm Tailstock taper: MK 3 Tailstock travel: 45 mm Number of turret positions: 10 Spindle speed range: 60 - 6000 rpm Rapid traverse X-axis: 15 m/min Iasdpfxozk D Hte Aa Esw Rapid traverse Z-axis: 20 m/min Operating hours: 27,267 h

Condition: used, Year of construction: 1998, grinding length 2000 mm grinding width 600 mm Iaodsv S Ip Eepfx Aa Eow total power requirement 17 kW weight of the machine ca. 10 t

Condition: used, Year of construction: 1998, grinding length 800 mm grinding width 500 mm workpiece height 425 mm total power requirement 15 kW weight of the machine ca. 4,5 t Iedpet Hxamsfx Aa Esaw Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical : GEIBEL & HOTZ CNC Cycle Controlled Precision Surface Grinding Machine model FS 850 GT SL year 1998 Serial no 1012580698 _____ Grinding length max. (table movement 900 mm) 800 mm Grinding width max. (cross movement 500 mm) 500 mm Mounting height under new grinding wheel 425 mm size of magnetic plate 800 x 500 mm Max. table load 1.100 kg Table speed 2 – 28 m/min Cross feed intermittend 3 – 60 mm/stroke Cross-/Vertical quick feed 4.000 mm/min Grinding wheel measurements 400 x 100 x 127 mm Grinding spindle-drive approx. 9 kW Total electrical load approx. 22 kW - 400 V - 50 Hz Weight approx. 4.500 kg Accessories / Special Features: • Dialog-guided GEIBEL & HOTZ automatic CNC cycle control model SL for 3 axes. Graphically supported data input in absolute dimensions or via teach-in procedures for preprogrammed grinding and dressing cycles. SIEMENS LCD display with softkeys for setting all parameters and easy monitoring axis movements and work progress. • Electronic handwheel for 3 axes X, Y, and Z, feed rate switchable from 0.01 / 0.1 / 1 mm/rev. • table movement is effected by a rolling ring thread drive (GT), which allows both very high and very low table speeds with constant torque and very high efficiency. • cross and vertical movements are effected by a ball screw drive with incremental glass scale. • Single-point diamond dresser mounted on the table for aut. dressing cycle and aut. compensation • MPM automatic grinding wheel balancing device. • Mounted electromagnet plate 800 x 500 mm with adjustable holding force • Wet grinding facility with universal fleece belt filtration unit • Complete enclosure of the working area with electronically safeguarded sliding doors • sep. switch cabinet, sep. mobile control panel, various accessories, manuals , etc. Condition : very good, with the wide grinding wheel for large surface grinding ! Please click here to view soon a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading We do always have a large selection of Grinding machines in stock – please let us know your requirements !

Condition: used, Year of construction: 2012, fuel type: diesel, Mast: articulated arm Lifting capacity: 272 kg Please contact Gebrauchtgeräte Center for more information Isdpfozl Nn Sjx Aa Eoaw

Condition: used, mileage: 50,543 km, power: 375 kW (509.86 HP), first registration: 05/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 06/2027, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), Standard warranty of 2 years up to a maximum of 100,000 km, drivetrain warranty of 4 years or 200,000 km. EBS, full braking assistant, EasyStart, LED lighting, 2 rotating beacons on cab roof, rear view camera pre-installation, ASR, emergency braking assistant, emergency braking assistant EBA, lane departure warning LDW, MAN Attention Guard, retarder, rotating beacons on cab roof, MAN Mediasystem Navigation Advanced 7'', navigation map Europe + Russia, Rio Box. Fifth wheel coupling height 40 mm, fifth wheel coupling JOST JSK 37 C 2'', 185 mm fifth wheel height, fifth wheel lead 1,075 mm. Hydraulic system for tipper semi-trailer 2-line system, Meiller, 275/150 bar, hydraulic coupling type G, 1 inch. Coupling height 1.30 m. Standard fifth wheel plate not suitable for heavy-duty operation!!!! Iasdpfx Aasvw H D Ss Esw

Condition: used, mileage: 89,697 km, power: 235 kW (319.51 HP), first registration: 12/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 12/2026, gearing type: semi-automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, approx. 2200 operating hours, 06/23, right-hand drive, TollCollect system, water cooler and charge air cooler, ASR (anti-slip regulation), ESS (emergency stop signal), EDC (engine data control) motor regulation, BreakMatic, MAN TeleMatics 2 GPRS, driver's comfort seat with air suspension and lumbar support, MAN TeleMatics 2 GPRS radio, video function, central locking, decorative trim, entry lighting, electric door window lifts, Brake Assist 2, emergency braking signal (ESS), Visy side loader HS Speedline PPK 27m³, oscillating press 3.7m³, SPS (programmable logic controller) control, color camera system with 4 cameras + 1 monitor, standard telescopic boom with 1620 mm lift, Lifter HSS 420 double comb for 2 MGB 80-240 liter EN 840-1 or 1 MGB 1,100 liter EN 840, electric central lubrication system, MD4. Iaedpfof Dg R Eox Aa Eew

Condition: used, mileage: 71,200 km, power: 235 kW (319.51 HP), first registration: 07/2021, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 07/2027, gearing type: semi-automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Operating hours: 2994. Right-hand drive, TollCollect, water cooler and charge air cooler, ASR, ESS, EDC engine control, BreakMatic, MAN TeleMatics 2 GPRS, driver comfort seat with air suspension and lumbar support, MAN TeleMatics 2 GPRS radio, video function, central locking, decorative inserts, entry lighting, electric door windows, Brake Assist 2, emergency braking signal (ESS), turning assistant. Side loader HS Speedline PPK 27m³, swing press 3.7m³, SPS control, color camera system 4x camera + 1x monitor, standard telescopic lift 1620 mm, Lifter HSS 420 double comb for 2 MGB 80-240 liters EN 840-1 or 1 MGB 1,100 liters EN 840, electric central lubrication system, MD4. Ijdjg Rd Ivjpfx Aa Eeaw