Used Bockwoldt Cb for sale (1,485)

Condition: excellent (used), Here we offer a temperature test chamber. Feutron Temperature Test Chamber, Air-Cooled Test chamber nominal volume: 280 liters Dimensions: External dimensions of the test chamber: Width 1540 mm x Height 2090 mm x Depth 1240 mm Fan motor and door removed: Width 1540 mm x Height 1940 mm x Depth 925 mm Test chamber: Width 720 mm x Height 690 mm x Depth 560 mm Door, clear opening: Width 720 mm x Height 690 mm Viewing window, heated: Width 500 mm x Height 600 mm Installation dimensions of the temperature test chamber with doors open Width 2340 mm x Height 2090 mm x Depth 2165 mm Feed-through opening, 2 pieces on the side wall, left: Ø 100 mm Temperature range -70°C to +180°C Heating: 3.0 K / min Cooling: 3.0 K / min Mains connection: 400 V 3/N/PE, AC, 50 Hz Maximum power consumption: 6.3 kW Weight: 635 kg Type: 3416/17 Refrigerant: R507 / R23 For your safety as a buyer, please note the following information! Nwjdpfx Aszgah Sed Sjh The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), CTS TS-70/200-5/S Temperature Testing Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TS-70/200-5/S Machine Type: Temperature Testing Chamber / Stress-Screening Testing Chamber Test Chamber Volume: approx. 200 liters For sale is a used temperature testing chamber from the manufacturer CTS. The testing chamber is suitable for temperature testing, stress screening, environmental simulation, material testing, quality assurance, as well as development and endurance tests. Technical Data Temperature Range: -70 °C to +180 °C Temperature Change Rate (Heating): approx. 8 K/min Temperature Change Rate (Cooling): approx. 6 K/min Max. Heat Radiation at +20 °C: approx. 3500 W Test Chamber Dimensions (approx.): 650 x 400 x 750 mm (W x D x H) Housing Dimensions (approx.): 920 x 1345 x 1800 mm (W x D x H) Nedpfx Aezf Hi Hjd Sowh Weight (approx.): 550 kg Power Connection: 400 V 3/N / 50 Hz Power Consumption: 10.9 kW Rated Current: 15.7 A Protection Class: IP22 Refrigerant, Pre-cooling Stage: R404A Refrigerant Quantity, Pre-cooling Stage: 2.5 kg Refrigerant, Cooling Stage: R23 Refrigerant Quantity, Cooling Stage: 0.6 kg / 15 bar Operating Pressure PS: 25 bar Test Pressure PT: 20 bar Equipment Touch panel operation Viewing window in the door Stainless steel interior Test chamber lighting Side openings as shown in the pictures Shelves / test chamber equipment as shown in the pictures Over-temperature test specimen protection Eurotherm safety controller RS232 interface Documentation / documents as shown in the pictures Areas of Application Temperature testing Stress screening Environmental simulation Material testing Electronics testing Quality assurance Research and development Scope of Delivery 1x CTS TS-70/200-5/S Temperature Testing Chamber Shelves / test chamber equipment Existing documentation / documents Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Scope of delivery as shown in the pictures. Subject to changes and errors in technical data as well as prior sale.

Condition: excellent (used), Vötsch VC 4060 Climate Testing Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VC 4060 Machine Type: Climate Testing Chamber / Temperature Testing Chamber Test Chamber Volume: approx. 600 liters Nodpjzf E E Tefx Ad Sowh Control System: S!MCON / 32 Cooling: water-cooled Refrigerant: R452A For sale is a used climate testing chamber from Vötsch. The testing chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical Data Test Chamber Dimensions: approx. 800 x 800 x 950 mm (W x D x H) Housing Dimensions: approx. 1090 x 1960 x 1995 mm (W x D x H) Weight: approx. 600 kg net Temperature Range: -40 °C to +180 °C Temperature Change Rate (Heating): approx. 4.0 K/min Temperature Change Rate (Cooling): approx. 3.0 K/min Temperature Deviation (Time): ±0.1 to ±0.5 K Temperature Deviation (Spatial): ±0.5 to ±2 K Temperature Gradient: approx. 1 to 4 K Climate Range (Temperature): -10 °C to +95 °C Humidity Range: 10 % to 98 % RH Humidity Deviation: ±0.1 to ±3 % RH Temperature Deviation (Climate Operation, Time): ±0.1 to ±0.3 K Temperature Deviation (Climate Operation, Spatial): ±0.5 to ±1.0 K Temperature Gradient (Climate Operation): approx. 1 to 2 K Power Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 7.8 kW Rated Current: 15.0 A Fuse: 16 A slow-blow, on-site 1 cable entry Ø 50 mm installed on the left 1 cable entry Ø 125 mm installed on the right Test chamber made of stainless steel Touch panel operation Equipment S!MCON / 32 control system Touch panel operation Interior made of stainless steel Test chamber lighting Side cable entries Ø 50 mm and Ø 125 mm Shelving / test chamber equipment as shown in the pictures Water-cooled system Documentation / operating manual Accessories as shown in the pictures Application Areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Scope of Supply 1x Vötsch VC 4060 Climate Testing Chamber Documentation / operating manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Inspection possible by appointment Note: The unit has been converted to use R452A refrigerant. Scope of supply as pictured. Subject to changes and errors in the technical data, as well as prior sale.

Condition: used, maximum load weight: 32,453 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 03/2020, next inspection (TÜV): 12/2026, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, In accordance with our "General Terms and Conditions," without any warranty whatsoever, we can offer you the following vehicle on a non-binding basis until final sale, subject to errors, typos, and prior sale: Nwodpezhhqdofx Ad Soh Schmitz Gardine LL with a liftable roof (Vehicle 302) First registration: 05.03.2020 Type: SCB?53T 176,222 km original! Overall length: 13,886 mm, overall width: 2,550 mm, overall height: 4,000 mm Permissible gross vehicle weight: 39,000 kg Unladen weight: 6,547 kg Payload: 32,453 kg TÜV (technical inspection): 12/2027, main inspection: 06/2026 Curtain on both sides Edscha 13 pairs of lashing eyes in the outer frame 4 rows of aluminum insertion strips 12642 XL Liftable roof Portal doors 1/2 and 1/2 at the rear 2 x rubber bumper 2 x LED reversing lights Fixed front wall Customs seal around the entire perimeter 2 x 12-ton, 2-speed geared winch 2 x wheel chocks Small pallet box Air suspension with raising and lowering function Lowering valve 1st lift Schmitz sliding roof mechanism Tires 435/50R19.5: 1.) approx. 40/80%, 2.) approx. 80/70%, 3.) approx. 80/80% Odometer for the 2nd axle on the passenger side 4 x ferry lashing: 2 x on the side at the rear + 2 x at the very rear Folding hazardous goods sign Price: € 13,500.00 (net) All information is provided without any warranty whatsoever. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of € 5,000.00 is the local court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typos, and prior sale.

Condition: used, maximum load weight: 29,625 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2017, next inspection (TÜV): 03/2027, loading space length: 7,480 mm, loading space width: 2,354 mm, loading space height: 1,460 mm, loading space volume: 26 m³, total width: 2,550 mm, total height: 3,035 mm, Equipment: ABS, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis until the conclusion of the sale, subject to errors, typos, and prior sale: Schmitz, approximately 26 cubic meter steel tipper/dump body, semi-circular (Vehicle 370) First registration: 09.10.2017 Type: SKI 24 7.2/ SGF-S3 Permissible gross vehicle weight: 36,000 kg Unladen weight: 6,375 kg Payload: 29,625 kg Technical inspection (TÜV): 03/2027, main inspection (SP): 09/2026 Overall length: 8,785 mm, internal length: 7,480 mm Overall width: 2,550 mm, internal width: 2,354 mm Overall height: 3,035 mm, internal height: 1,460 mm Roll-over tarpaulin, platform, access ladder on the driver's side Hinged flap with rubber seal 2 x 12-ton, 2-speed geared winch Shovel and broom holder on the driver's side 2 x wheel chocks Air suspension with lifting and lowering function 1st lift axle Nwsdpfxoy U Aztj Ad Sjh Schmitz fifth wheel coupling Tires: 1) approximately 40/60%, 2) approximately 90/40%, 3) approximately 80/90% Half-shell mudguards 2 x LED reversing lights Folding warning sign (A-sign) Fold-up underrun protection 2nd and 3rd axles: new air springs Price: €15,500.00 (net) All information provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the Ludwigslust local court; for disputes exceeding this value, it is the Schwerin regional court. Subject to errors, typos, and prior sale.

Condition: new, For sale: Professional carrying harness for self-contained breathing apparatus (SCBA) Dräger PSS 7000 • Model: PSS 7000 • Pressure gauge: up to 300 bar • Part No: 3355850 • Type No: 3355068 • Technical condition: good • Complete set of straps and buckles • Sturdy frame with no cracks Selling exactly what is shown in the photos. No cylinder or face mask included. Nwodpfx Aoy Ilvgjd Soh Firefighter-grade equipment – top series from Dräger.

Condition: excellent (used), For sale: Professional Schneider Electric Masterpact NW25 H1 circuit breaker equipped with a Micrologic 5.0 A protection unit. This device is used in industrial power distribution systems—such as low-voltage switchboards, manufacturing plants, industrial halls, and power installations. The Masterpact NW series circuit breakers are designed for demanding industrial environments and provide reliable protection against overloads and short circuits. The unit is in very good visual and technical condition—the exact condition can be seen in the photos. Technical Specifications: Nwjdjyua Amopfx Ad Sjh Manufacturer: Schneider Electric Series: Masterpact NW Model: NW25 H1 Protection unit: Micrologic 5.0 A Rated current: 2500 A Insulation voltage: Ui 1000 V Impulse withstand voltage: Uimp 12 kV Operating voltage: up to 690 V AC Breaking capacity Icu: 65 kA Ics: 100% Icu Standard: IEC 60947-2 Frequency: 50 / 60 Hz Utilization category: AC23A Year of production: 2011 Assembly location: Schneider Electric Venray (Netherlands) The circuit breaker protects installations against overloads and short circuits, and allows for adjustment of protection parameters thanks to the Micrologic unit. Applications: • Low-voltage switchboards • Industrial facilities • Power installations • Energy distribution systems • Large machinery and production lines ✔ Robust industrial construction ✔ High breaking capacity ✔ Adjustable Micrologic protection settings ✔ Equipment from the renowned manufacturer Schneider Electric

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 02/2020, suspension: air, color: white, Year of construction: 2020, = Additional Options and Accessories = - Rear doors - Refrigeration/freezer unit - Air suspension = Further Information = Axle configuration Suspension: Air suspension Rear axle 1: Max. axle load: 9000 kg; Tire tread depth left: 30%; Tire tread depth right: 30% Rear axle 2: Max. axle load: 9000 kg; Tire tread depth left: 30%; Tire tread depth right: 30% Rear axle 3: Max. axle load: 9000 kg; Tire tread depth left: 30%; Tire tread depth right: 30% Weights Unladen weight: 9,800 kg Payload: 32,200 kg GVW: 42,000 kg Functional Cooling: 20 °C to 20 °C Body manufacturer: Schmitz Nodpfjzhgnbex Ad Sswh Refrigeration engine: Diesel and electric Condition Technical condition: good Optical condition: good

Condition: new, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, color: white, number of seats: 22, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, MAN TGE stock vehicle, immediately available Base vehicle used in the package for 72,990.00 Euros, including ADA system, model 2025: 5.160 = 163 hp / Euro 6E Length 7334 mm (L 4) Permissible total weight 5000 kg Wheelbase 4490 mm Tires 205/75 R 16 C 115/113 Roof-mounted flashing lights on the rear roof (school bus blinkers) Front air conditioning system Climatic Daytime running light function with assistance driving light Electrically adjustable and heated exterior mirrors Fog lights including cornering lights Large MAN Media DAB+ radio Comfort seat with seat heating Cruise control Intelligent speed assistant Rear view camera Parking assist front and rear Driver fatigue detection Emergency braking assistant ESP and ABS with electronic differential lock Traffic sign recognition Active lane keeping assistant Crosswind assist Driver fatigue detection Lord Comfort equipment package for 89,990.00 Euros, including: - Acoustic and thermal insulation - Electric exterior swing door with recessed entry step - 22 reclining seats, optionally reduced to 19 reclining seats plus a tour guide seat - Webasto/Diavia RT 145 air conditioning system in the passenger compartment - Front air conditioning = dual-zone climate control - Night lighting in orange and white - Convector heating on the left and right - Flattened entry area - Seats with synthetic leather headrests, rearward adjustable, optionally with yellow grab handles on the aisle seats and 3-point seat belts on all seats - VIP Black double-glazed windows - Roof hatch Optional rear extension = + 8 weeks additional build time + 8,000.00 Euros Nwodpfx Adozhgdis Ssh Further options available on request 24 months MAN warranty without mileage limitation, or for low-mileage drivers, 48 months with a maximum of 80,000 kilometers. 12 months warranty on the conversion (excluding supplier parts with different warranty conditions). Net export possible.

Condition: used, empty load weight: 9,630 kg, maximum load weight: 26,370 kg, overall weight: 36,000 kg, axle configuration: > 3 axles, first registration: 06/2014, next inspection (TÜV): 02/2027, loading space length: 13,310 mm, loading space width: 2,500 mm, loading space height: 2,600 mm, loading space volume: 86 m³, total length: 13,310 mm, suspension: air, tire size: 385/65 22,5, tire condition: 80 %, color: white, Year of construction: 2014, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transport of commercial vehicles Nedpfx Aszhfxred Sjwh Ask our trained specialists, we will be happy to advise you.

Condition: used, maximum load weight: 34,120 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 03/2024, next inspection (TÜV): 03/2027, loading space length: 13,500 mm, loading space width: 2,475 mm, loading space height: 2,737 mm, loading space volume: 88 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2024, Equipment: ABS, 3-axle STAS Walking Floor Semi-Trailer, 88 cbm First registration 07/2024, from first owner Mileage only 69,324 km Internal dimensions (L x W x H) 13,513 x 2,475 x 2,536 / 2,752 mm >>> Saddle height 1,200 to 1,250 mm Axle distance 1,310 mm Unladen weight 7,880 kg Chassis made of steel, hot-dip galvanized SAF axles with large disc brakes, 430 mm, reinforced "CD" version WABCO Trailer EBS with anti-roll system RSS WABCO Smartboard with axle load indicator >>> 1st and 3rd axles are lift axles >>> WABCO OptiTurn steering system to reduce the turning radius Air tank made of aluminum Tire size 6x 385/65 R 22.5 Crank-operated saddle JOST full-load Nwedpfey S Nqcsx Ad Ssh Lighting ASPÖCK full LED 4 x LED work lights Toolbox on the rear left Side walls with profile overlaps, completely welded on the inside CARGOFLOOR sliding floor with 21 planks, material thickness 10 mm, ribbed >>> with floor reinforcement for forklifts and full load, sliding bearings Control with WIRELESS REMOTE CONTROL End plate at the rear made of stainless steel Side rails 2 pieces, reinforced waste disposal version Roof tarpaulin, reinforced version >>> Rear crossbar swivels, can be operated from the ground with grain slide in the left door leaf RENTING is the new BUYING, and it is immediately available with us, even in FULL-SERVICE LEASING.

Condition: reconditioned (used), Year of construction: 2013, operating hours: 1,522 h, functionality: fully functional, working width: 510 mm, area performance: 2,300 m²/h, overall weight: 230 kg, warranty duration: 12 months, water tank capacity: 42 l, HAKO HAKOMATIC B45 CL TB510 SCRUBBER NEW 12V 105Ah SIAP GEL BATTERIES (2x) Manufactured in 2013 with 1522 hours of operation 510mm cleaning head (TB510) equipped with a new medium-hard disc brush for use on any surface New polyurethane squeegee rubbers resistant to oil, grease, and petroleum products. The built-in battery charger and wheel drive simplify daily operation. A new protective rubber around the brush head prevents water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer is individually photographed; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 510 Suction nozzle working width (mm): 860 Theoretical capacity (m²): 2300 Brush speed (rpm): 210 Tank capacity (l): 42/42 Machine weight, ready to use (kg): ~230 Power (kW): 1.31 INCLUDED: NEW 12V 105Ah SIAP GEL BATTERIES (2x) NEW 24V 400W suction turbine NEW 510mm PPL 0.5 disc brush NEW suction hose NEW drain hose Nedpfozhbrhjx Ad Sowh NEW head guard rubber Squeegee blade with new oil-resistant rubbers Built-in battery charger 5 liters of Tenzi Normal fluid - FREE KEY FEATURES: The 42-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The large working width (510 mm) ensures high surface coverage. The control panel is very clear and intuitive.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 6,035 h, load capacity: 3,000 kg, lifting height: 6,560 mm, free lift: 1,750 mm, fuel type: electric, mast type: triplex, construction height: 2,800 mm, fork carriage width: 1,750 mm, fork length: 1,360 mm, empty load weight: 7,184 kg, total length: 1,600 mm, drive type: Elektro, construction width: 1,520 mm, Four-way side loader Load center: 600 mm Fork width: 150 mm Fork thickness: 55 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Cushion Front tires size: 22x10x16 Rear tires type: Cushion Rear tires size: 16x7x10.5 Battery voltage: 48V Nwodpfxsy Sqb No Ad Sjh Battery capacity: 930Ah Battery year: 2020 Description: In addition to this Combilift model, we have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and side loaders in stock at our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Leasing and financing at attractive terms are always available. We are also happy to purchase your used machine directly, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this CBE3000. P.S.: Our forklift master workshop specializes in repairs, servicing, overhauls, and custom builds for forklifts starting from 8 tons. We can also sell your vehicle on a consignment basis. Sideshifter, fork positioner, Fork positioner opening range: 410 / 1700 mm; telescopic forks: 1360 / 2350 mm Cab heater, full cab, full free lift,

Condition: excellent (used), Here, we offer a temperature shock test chamber with a 100-liter usable volume for larger test specimens up to 30 kg. Compliant with all common international standards. Nwjdpfjzfg Upex Ad Seh Water-cooled Temperature range, warm chamber: +60 °C to +200 °C Temperature range, cold chamber: -70 °C to 0 °C Test chamber dimensions: 710 x 345 x 410 (W x H x D) in mm External dimensions: 1100 x 1885 x 1965 (W x H x D) in mm Water-cooled refrigeration unit Program control via touch panel Automatic defrost Over-temperature protection Operating hour counter Mobile design 2 test specimen baskets made of stainless steel Cable entry Ø 100 mm Refrigerant: 3 kg R404A, 1 kg R23 Power supply: 400V 3-phase 50Hz Max. power consumption: 32A Type: TSD-100 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: ready for operation (used), functionality: fully functional, Optimatic rsmo 090 -tensioning, leveling and back correction for bandsaws. Fully functional. Year of manufacturing 2011 Nedsyym S Topfx Ad Sjwh Vollmer Depomatic-System ALIGATOR . Perfect working condition, 1997 , equipped with induction heater for annealing welded teeth

Condition: used, machine/vehicle number: 20023-1, Bolt Former Chun Zu 4 Dies Model: CBF-64S Forging load: 40 tons Max cut-off diameter: 8 mm Max cut-off lenght: 95 mm Max lenght under head (KO): 80 mm Nsdpszg Nmqefx Ad Sswh Max. Output: 240 parts/min Year: 2001

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, Used CNC Boring and Milling Machine Manufacturer: WMW / UNION Gera Type: CBFK 130/2 Spindle diameter: 130 mm Manufacturer: VEB Werkzeugmaschinenfabrik UNION Gera Design: Traveling column boring machine (planer type) Tool magazine available CNC control retrofitted or modernized Nwjdozffmkspfx Ad Soh Weight according to nameplate: 28.3 t Connected power: 80 kW Control: Heidenhain control Technical data Spindle diameter | 130 mm | Tool holder | ISO 50 | Main drive | approx. 40–45 kW | Connected power | 80 kW | Spindle speed | up to 3,000 rpm | X-axis travel | approx. 3,000 mm | Y-axis travel | approx. 1,600 mm | Z-axis travel | approx. 1,250 mm | W-axis spindle travel | approx. 900 mm | Table load | approx. 12.5 t | Machine weight | approx. 28–30 t | Tool magazine | 60

Condition: used, functionality: fully functional, Year of construction: 2005, load capacity: 1,000 kg, lifting height: 1,650 mm, Electric Stacker JUNGHEINRICH type EMC B10 Year of construction: 2005 Maxi loading capacity: 1000 KG Centre of gravity: 600 mm Maximum width of the lower forks: 1250 mm Total length of the lower forks: 960 mm Equipped with new batteries (October 2024) Length: 1500 mm Width: 1250 mm Total Lift height: 1650 mm Nsdpozg Ifxefx Ad Sjwh Weight: approx. 500 kg

Condition: ready for operation (used), Year of construction: 2020, machine/vehicle number: 5001522601F, functionality: fully functional, operating hours: 500 h, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 540 mm, cutting width (max.): 700 mm, control type: PLC-controlled, roller diameter: 80 mm, pivoting range: 60 °, actuation type: electric, rotational speed (max.): 15 rpm, rotational speed (min.): 150 rpm, total height: 2,510 mm, total length: 4,700 mm, total width: 4,700 mm, overall weight: 3,875 kg, table height: 810 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, lighting, motor brake, rotational speed infinitely variable, PEGAS-GONDA PEGAS 500x750 HERKULES X-CNC Automatic Double-Column CNC Band Saw for Metal Cutting with Automatic Mitering Only 500 Operating Hours – Manufacturer-Maintained Machine – 6-Month Warranty We offer for sale a professional PEGAS-GONDA PEGAS 500x750 HERKULES X-CNC automatic double-column metal band saw with automatic angle positioning from +45° to -60°. Year of manufacture: 2020 The machine was operated directly by the manufacturer from 2020 until May 2026 and has accumulated only approximately 500 operating hours. As a result, it comes with a fully documented history, has received regular professional maintenance, and remains in excellent condition with minimal wear, ready for immediate production use. Main Features ✓ Fully automatic CNC operation ✓ Automatic mitering from +45° to -60° ✓ Material feeder with 2,000 mm stroke ✓ Precision ball screw drives for both the material feeder and saw frame movement ✓ Siemens control system ✓ Saw blade size: 41 × 1.3 mm ✓ Heavy-duty double-column design for maximum cutting accuracy ✓ Suitable for both high-volume production and custom fabrication work Why Choose This Machine? Only 500 Operating Hours Exceptionally low operating time for a machine manufactured in 2020. The saw was used by the manufacturer and not in continuous production, resulting in very low wear. Direct Sale from the Manufacturer Nwedpfezg H Avjx Ad Seh Purchase a machine with a clear origin, known history, and documented maintenance records. 6-Month Warranty Additional peace of mind when purchasing used industrial equipment. Immediate Availability No waiting time for the production and delivery of a new machine. Significant Cost Savings A new machine with a comparable configuration costs approximately CZK 1.8 million. Live Demonstration Available The machine can be inspected and tested under power prior to purchase. Machine Condition Fully operational Only approximately 500 operating hours Regularly serviced by the manufacturer Ready for immediate use No immediate investment required The machine is available for inspection and demonstration in Slavkov u Brna, Czech Republic. If required, we can also offer a brand-new machine with a full manufacturer's warranty. Installation and Training A professional service team is available to provide: Machine installation at your facility Commissioning and start-up assistance Operator training After-sales technical support

Condition: used, axle configuration: 3 axles, first registration: 01/2016, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 4,000 mm, tire size: 385/65R22.5, tire condition: 40 %, color: white, Year of construction: 2016, Equipment: ABS, Tire size: 385/65R22.5 Nodpfx Adezg Dtle Sjwh Rear axle 1: Tire tread: 40%; Reduction: single reduction Rear axle 2: Tire tread: 70%; Reduction: single reduction Rear axle 3: Tire tread: 60%; Reduction: single reduction Unladen weight: 7,273 kg Payload: 34,727 kg GVWR: 42,000 kg Body brand: Schmitz Cargobull Damage: none = Company Information = Heisterkamp Used Trucks BV doesn't just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are immediately ready for use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today's requirements, and meet the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Phone: - E-mail: - Website:

Condition: used, axle configuration: 3 axles, first registration: 01/2016, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 4,000 mm, tire size: 385/65R22.5, tire condition: 60 %, color: white, Year of construction: 2016, Equipment: ABS, Tire size: 385/65R22.5 Rear axle 1: Tire tread: 60%; Reduction: single reduction Rear axle 2: Tire tread: 40%; Reduction: single reduction Rear axle 3: Tire tread: 50%; Reduction: single reduction Unladen weight: 7,273 kg Payload: 34,727 kg GVWR: 42,000 kg Body brand: Schmitz Cargobull Damage: none Nwodpfx Aszg Dtfsd Ssh = Company Information = Heisterkamp Used Trucks BV doesn't just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are immediately ready for use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today's requirements, and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Phone: - Email: - Website:

Condition: used, axle configuration: 3 axles, first registration: 01/2016, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 4,000 mm, tire size: 385/65R22.5, tire condition: 60 %, color: white, Year of construction: 2016, Equipment: ABS, Tire size: 385/65R22.5 Rear axle 1: Tire tread: 60%; Reduction: single reduction Rear axle 2: Tire tread: 60%; Reduction: single reduction Rear axle 3: Tire tread: 50%; Reduction: single reduction Unladen weight: 7,273 kg Payload: 34,727 kg GVW: 42,000 kg Body brand: Schmitz Cargobull Damage: none = Company information = Heisterkamp Used Trucks BV doesn't just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are immediately ready for use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today's requirements, and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Phone: - Email: Nwsdpfx Adjzg Dr Ue Soh - Website:

Condition: used, axle configuration: 3 axles, first registration: 01/2016, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 4,000 mm, tire size: 385/65R22.5, tire condition: 40 %, color: white, Year of construction: 2016, Equipment: ABS, Tire size: 385/65R22.5 Rear axle 1: Tire tread: 40%; Reduction: single reduction Rear axle 2: Tire tread: 60%; Reduction: single reduction Rear axle 3: Tire tread: 50%; Reduction: single reduction Unladen weight: 7,273 kg Payload: 34,727 kg GVW: 42,000 kg Body brand: Schmitz Cargobull Damage: none = Company Information = Heisterkamp Used Trucks BV doesn't just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are ready for immediate use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today's requirements, and comply with the high standards of our industry. Details Nwedpfxezg Dr Ie Ad Seh - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Phone: - Email: - Website:

Condition: used, axle configuration: 3 axles, first registration: 06/2015, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 4,000 mm, tire size: 385/65R22.5, tire condition: 60 %, color: yellow, Year of construction: 2015, Equipment: ABS, Tire size: 385/65R22.5 Nwsdszg Drhjpfx Ad Sjh Rear axle 1: Tire tread: 60%; Reduction: single reduction Rear axle 2: Tire tread: 70%; Reduction: single reduction Rear axle 3: Tire tread: 40%; Reduction: single reduction Unladen weight: 7,273 kg Payload: 34,727 kg GVW: 42,000 kg Body manufacturer: Schmitz Cargobull Damage: none = Company Information = Heisterkamp Used Trucks BV doesn't just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are ready for immediate use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today's requirements, and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Phone: - Email: - Website:

Condition: used, axle configuration: 3 axles, first registration: 06/2015, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 4,000 mm, tire size: 385/65R22.5, tire condition: 50 %, color: yellow, Year of construction: 2015, Equipment: ABS, Tire size: 385/65R22.5 Rear axle 1: Tire tread: 50%; Reduction: single reduction Rear axle 2: Tire tread: 40%; Reduction: single reduction Rear axle 3: Tire tread: 40%; Reduction: single reduction Unladen weight: 7,273 kg Payload: 34,727 kg Gross vehicle weight: 42,000 kg Body manufacturer: Schmitz Cargobull Damage: none = Company Information = Heisterkamp Used Trucks BV doesn't just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We manage used trucks and trailers that are immediately available for operation. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today’s demands, and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Telephone: - E-Mail: - Website: Nsdpfozg Drbjx Ad Sewh