Used Block Back Cutter And Notching Machine for sale (70,869)

Condition: new, 3.0 mm ST 40 2.0 mm VA 90.0 Grad blade length 130 x 130 mm table: 640 x 460 mm Lsdpfx Asxcuxkonceaa work height max. 900 mm engine output pneumatisch weight 200 kg range L-W-H 600 x 670 x 1270 mm Properties: - Notching with burr-free cut, without deformation of the cutting edges - Machine body made of high-quality gray cast iron, base made of sheet steel - Cutting blades made of surface-hardened tool steel - Effortless work thanks to pneumatic drive - Operation using a foot pedal, so both hands are free for the workpiece - Large work table with integrated scales - T-slots for precise guidance of the pivoting stops - Protective cover in front of the cutting blade for high safety Scope of delivery - 1x set of cutting blades - 2x pivoting material stops - Plexiglas protective cover - Foot pedal - Base frame

Condition: used, Year of construction: 1996, 4.0 mm 3.0 mm 30 - 120 Grad blade length 150 x 150 mm work height max. 900 mm table: 1000 x 650 mm engine output 3.0 kW weight 850 kg range L-W-H 1250 x 1000 x 1160 mm Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional "Touch Pad" control panel * Set-up stroke * Single stroke * continuous stroke Laodoxabpdepfx Ancoa - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - adjustable lift height adjustment - Waste bin - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30° left and once on the right. - the swivel adjustment becomes pneumatic, immediately after completion of the first notch, lightning fast carried out.

Condition: new, plate thickness max. 5.0 mm tube diameter 27.9 - 61.0 mm motor 400 Volt total power requirement 2.2 kW weight of the machine ca. 87.0 kg. The AL1-2E electric pipe notcher is started at the push of a button, and the pipe notcher is driven continuously. This means you can continue to work on new parts without having to switch the machine on again each time. With the electrically driven AL1-2E pipe notcher you can notch pipe outer diameters of Ø 26.9 (3/4?), Ø 33.7 (1?), Ø 42.4 (1 ¼"), Ø 48.3 (1 ½"), Ø 60.3 (2?). Do you often notch pipes? Then the electrically driven AL1-2E pipe notcher with the 2.2 kW electric motor is just right for you. The motor forms a unit with the special eccentric shaft that drives the notching tool. The motor is also Lodpjxaardefx Ancoaa equipped with an on/off switch with 0-voltage protection and a protective cap. Equipment: - electric motor pipe notching machine - for pipes 27.9 - 34.8 - 42.8 - 49.0 and 61.0 mm - operating instructions

Condition: used, Year of construction: 1992, machine/vehicle number: 27123, Offer 25466 Technical Data: - Cutting length up to 125 mm - Cutting thickness - at 400N/mm² tensile strength: 4 mm - at 700N/mm² tensile strength: 2.5 mm - Aluminium, plastic: 6 mm - Cutting angle: 90° - Depth stops Laodpfx Ansyfchgecja - Foot pedal - Space requirements approx. W 700 x H 1400 x D 800 mm - Weight approx. 150 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, HESS RH 1500 2.1 SVA Year of manufacture: 2008 Start: 2009 Very good technical condition. Operating until the end of January. In 2022 a new roller for the upper hopper was installed by Topwerk - Hess. Vibrating table completely overhauled Lajdpfsyb Rvksx Ancja Siemens S7 control 3 molds included Price 195000euro Machine is located in Slovenia

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, grinding wheel diameter: 200 mm, workpiece length (max.): 200 mm, TECHNICAL DETAILS Grinding wheel diameter: 100–200 mm Maximum workpiece length: 200 mm MACHINE DETAILS Control: Siemens 840D or equivalent CNC axes: 3–5 axes Drive power: 5–10 kW Coolant tank: 100–200 litres EQUIPMENT Coolant filtration system Universal applicability for different tool types and geometries Laodpfx Anjya Dy Hocsa High flexibility through CNC programming and adaptable clamping devices Process reliability thanks to integrated cooling and filtration system Easy maintenance due to modular design and central supply units

Condition: used, Powerflex IV Thread Cutting Machine, Thread Cutter M8 - M27 75 rpm - 900 rpm Reach: max. 1200mm radius Year of manufacture: 2008 You are welcome to schedule an inspection appointment. We can also arrange affordable shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided a valid VAT number is supplied. Subject to prior sale. Visit our shop and check out our other offers as well. Lodpfx Asq U Sfpjncoaa The specified company names and trademarks are property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the item description may occur and are reserved.

Condition: new, Year of construction: 2021, functionality: fully functional, total height: 5,400 mm, total length: 8,300 mm, total width: 2,300 mm, warranty duration: 12 months, input voltage: 380 V, input frequency: 50 Hz, Machine for squaring blocks and cutting slabs and thick slabs, featuring a heavy-duty, arc-welded steel structure, which is heat treated to ensure the required stiffness of the system and a top cutting precision. Extremely user-friendly, the machine is provided with a control console with touch-screen housed in the electric cabinet and a mobile button panel to actuate the main working axes. Ljdpfx Ajtwww Hjncjaa The machine needs to be adapted for different voltages and frequency. The machine is not available for North America.

Condition: new, overall weight: 54,000 kg, total height: 7,900 mm, total length: 12,500 mm, total width: 8,500 mm, workpiece length (max.): 3,700 mm, workpiece height (max.): 2,200 mm, Breton Paragon Flex is the multi diamond wire machine for sawing marble or granite blocks, cutting slabs in slight thickness Multi diamond wire machine to cut 12, 20 or 30 mm thick slabs. The structural robustness combined with the characteristic triangle system makes it possible to saw marble and granite blocks to make slabs of various thicknesses, even thin ones. Confidential negotiation Ljdpfxexbg Rce Ancsaa

Condition: new, functionality: fully functional, overall weight: 52,000 kg, total length: 10,400 mm, total width: 6,800 mm, workpiece length (max.): 3,700 mm, workpiece height (max.): 2,200 mm, Breton Paragon is the multi diamond wire machine for sawing marble or granite blocks, cutting slabs in slight thickness Multi diamond wire machine to cut 20 or 30 mm thick slabs. Lasdpfx Asxdh Rcjncea The structural robustness combined with the characteristic triangle system makes it possible to saw marble and granite blocks to make slabs of various thicknesses. Price from €uro 500.000

Condition: good (used), Year of construction: 1998, punching force: 70 t, overall weight: 2,400 kg, total length: 2,100 mm, total width: 1,300 mm, total height: 1,900 mm, Profile shear with punching and notching station, shear capacity 70 tons = 450x15 mm, punching capacity 130 tons = Ø 28x20 mm, punching throat 500 mm, punching table 1150x530 mm with gauges, shear gauge with trigger pulse, 2 foot pedals, much tools; dimension 1300x2100x1800 mm, weight ca. 2400 kgs Lajdpsmig D Djfx Ancoa

Condition: good (used), Notching milling machine -automatic hydropneumatic milling feed -for milling cutters max.: Ø 250 mm Laodpfx Aneb A Hlaecea

Condition: good (used), Notching milling machine Ledpfxob A H Hfe Ancsaa -automatic hydropneumatic milling feed -Maximum cutter diameter: 250 mm

Condition: new, neu ca. 8 Wochen ab Auftragse Türkei 8700 € 167.91 € Ljdowiqlvopfx Ancoaa 250 mm 6 mm 3 mm 25 1/min 90 ° 4 kW 950 mm 780 mm 1115 mm 585 kg Hydraulic drive Automatic adjustment of the blade gap 2 downholder 2 gauges angle adjustable Protection cover, acrylic glass Foot pedal Waste box According to "CE" regulations User manual in English or German

Condition: good (used), functionality: fully functional, Year of construction: 1997, Used variable angle notcher by Euromac Type Multi 220 6 Capacity 220 x 220 x 6 mm Lodpfx Aex E U Awjncsaa Equipped with radius cutting punch at the rear side

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 176308, Country of manufacture: Switzerland Voltage: 400 / 380 / 50 / 3 Net weight: approx. 350 kg Dimensions: 82x85x156 cm Installed power: max 2 kVA Customs classification: 8460.3930 TECHNICAL SPECIFICATIONS GRINDING WHEEL SPINDLE UNIT Spindle speed (both rotation directions): 2,500 / 3,500 / 5,000 / 7,100 rpm Grinding wheel motor power (2,800 rpm): 0.4 HP Vertical slide stroke (linear): 100 mm Micrometric stop adjustment travel: 25 mm Micrometric stop readout accuracy: 0.01 mm WORKPIECE SPINDLE UNIT Workpiece spindle speed (both directions, continuous): 100–900 rpm Motor power: 0.2 HP Ledpfsw T S Sqox Ancsaa Indexing plate teeth count: 120 Angular vernier reading: 20' Collet type: W-20 Horizontal travel: 100 mm Rapid feed per handwheel turn: 2 mm Micrometric feed per handwheel turn: 0.1 mm Micrometric feed per scale division: 0.001 mm SPINDLE HEAD SWIVEL RANGE (a) Main direction: 165° Fixed ratchet increments: every 3° Increments with micrometric screw: every 2' (b) Grinding plane: approx. 15° Stop: at 0° Cross movement range: 80 mm Micrometer travel: 25 mm Reading precision: 0.01 mm Extraction motor power (2,800 rpm): 0.25 HP All technical specifications provided without guarantee and subject to possible errors or omissions.

Condition: new, IDEAL Krug & Priester 1080 Lever Cutter Lajdpfjx R Scxjx Ancja Material blade sharpening angle 75° Ideal for cutting paper, cardboard, linoleum, plastic and metal foils, thin sheets, and other materials Resharpenable blade set made of Solingen steel Complete with solid base and foot press Fold-out side table, right Side fence with scale in mm and inches Infinitely adjustable back fence with locking screw Front fence with locking screw and narrow cutting attachment Scale knob for precise front fence adjustment Printed DIN format markings A3 to A6 Fixed, transparent blade guard made of shatterproof plastic with blade locking device Extra stable die-cast aluminum blade bearing and double-bearing blade axle for precise cuts Extremely robust metal construction GS certified Brand quality Made in Germany Cutting length: 800 mm Cutting capacity: approx. 20 sheets (70 g/m² paper) - 4 mm clearance Table size (W x D): 605 x 800 mm Dimensions (H x W x D): 1215 x 670 x 1080 mm Width with side table extended: 890 mm Weight: 55 kg Condition: New More cutting machines in other sizes - new and used - can be found in our shop! International shipping costs on request!

Condition: good (used), Notching machine, sheet metal notcher, notching shear, corner notching machine, corner shear, corner shear -Max. cutting capacity: approx. 2 mm -Blade length: 102 mm -Dimensions: 620/590/H1790 mm Ledpfsdf U S Ajx Ancsaa -Weight: 150 kg

Condition: good (used), Schmedt PraCut 6501 Notching Machine Very good condition, ready to work. Ljdpfx Aewxtgbsncsaa A machine for cutting the spine to increase the area of ​​glue application and to cut the spine fold. This makes the block much more durable and binding becomes faster. Manufactured by Schmedt, Germany. Technical data: Book block thickness: up to 90 mm Book block height: up to 350 mm Requires air supply Power supply: three-phase 380V Productivity: about 250-350 pieces per hour.

Condition: refurbished (used), Year of construction: 2013, We have multiple Mueller Apparatebau paper cutting systems available! Ledpfotwc Abox Ancoaa Paper cutters fo pin feed available. We offer all machines after complete maintenance. We mostly have model 6612 but we also have a paper cutter system type 6611. Next to that we have a lot of other Mueller modules like unwinder, collating module and folding modules etc etc! Just let us know and we have the solution!

Condition: good (used), Year of construction: 1983, Indumasch Siegen H200 Notching Machine TECHNICAL SPECIFICATIONS Sheet thickness: 4.0 mm Sheet thickness (stainless steel): 3.0 mm Blade length: 200 mm Adjustable angle range: 30 - 120 degrees Strokes per minute: 60 Oil capacity: 60.0 l Table size: 1000 x 800 mm Total power requirement: 2.62 kW Weight: 800 kg Dimensions (L x W x H): 1000 x 1500 x 1440 mm Year of manufacture: 1983 DESCRIPTION Equipment: - Robust hydraulic notching machine with adjustable angle - Adjustment range 30 - 120 degrees * Adjustment via 2x front handwheels - Hydraulic clamping and locking mechanism - Steplessly adjustable cutting depth with digital display - 2x positioning stops with stop bars for precision - Sheet stripper for cut sheets - Collection container for cuttings - Freely movable foot pedal for stroke release Lodjx N Ex Dspfx Anceaa

Condition: used, Year of construction: 2000, plate thickness 3 mm blade length 225 x 225 mm Laodpfx Ansxyacpecsa cutting angle 90 ° throat 110 mm strokes per minute 45 total power requirement 2,5 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 1 x 1 x 1,2 m

Condition: good (used), Year of construction: 2006, machine/vehicle number: 80706, Offer 25496 Hydraulic Universal Two-Station Corner Notcher + Punching Machine Technical Data: Ljdpfx Ajx I Nbgsnceaa Station 1: Notching Unit - Cutting length up to 220 mm - Cutting thickness – steel with 400 N/mm² tensile strength: 6 mm - Infinitely adjustable cutting angle by handwheel: 30° – 140° - Pneumatic clamping - Locking stops left & right - Table surface: 1020 x 940 mm - With T-slots and depth stops - Table height approx. 920 mm Station 2: Edge Bending Unit or Punching Station - Max. pressing force: 200 kN - Working speed: 0 to 10 mm/sec - Edge bending up to 800 mm - Hole punching up to 50 in 3 mm - Depth stops - Drive: 400 V / 4 kW - Electric foot switch - Required space approx. W 1000 x H 1350 x D 1110 mm - Weight approx. 1100 kg

Condition: new, messurements (LxWxH): 1,10 x 1,15 x 1.40weight approx.: 1,150total power requirements: 4sheet thickness: 6 mm Details: - Hydraulic drive - Blade length: 200 mm - Adjustable angle: 60° - 140°, 6 mm Lasdpfxed Ab Idj Ancoa - Adjustable angle: 30° - 59°, 4 mm

Condition: good (used), Year of construction: 2010, Magurit 314 Frozen Meat Block Cutter The Magurit STARCUTTER 314 is a rotary commercial meat slicer with a power of 9.2 kW designed for medium-sized productions. It can handle most common block sizes whether the standard EURO-2 or US 60lbs blocks, reducing frozen products continuously at temperatures as low as -22°F (-30°C). Slabs are fed through the integrated pneumatic feeding ram to the rotating cutting drum. These unique C-Cut blades can handle high volumes with ease processing up to 8 tons per hour while maintaining a high-quality cut. With a single pass through the machine, it results in smaller pieces with thicknesses between 3 and 9 mm. Manufacturer: Magurit Ledpfxox Exizo Ancoaa Model: 314 Year: 2010 Capacity: Up to 4.000 kg/h Power: 9,2kW / 400V / 20A / 50Hz Cutting Area Dimensions: 410x250x650 mm Cutting Thickness: 3, 6, 9 mm Machine Dimensions LxWxH: 2.200x1.000x1.400 mm Machine Weight: 960 kg.