Used Bilz Hss for sale (299)

Condition: new, table height: 800 mmmessurements (LxWxH): 2980 x 1480 x 800table width: 1480table length: 2980weight approx.: 630 Itjdpfx Aksfk Ailexef Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. For more information, follow the link:

Condition: new, table height: 800messurements (LxWxH): 1950 x 950 x 800table width: 950table length: 1950weight approx.: 285 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. Iodpfefk Aiwex Akxotf For more information, follow the link:

Condition: new, table height: 650 - 1050messurements (LxWxH): 1980 x 1480 x 650 bis 1050table width: 1480table length: 1980weight approx.: 491This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. Isdpefk E Dzjfx Akxjtf For more information please follow this link:

Condition: new, table height: 650 - 1050messurements (LxWxH): 1480 x 1480 x 650 bis 1050table width: 1480table length: 1480weight approx.: 464This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. Itedpfjgrz Tlex Akxef For more information please follow this link:

Condition: new, table height: 800messurements (LxWxH): 1400 x 900 x 800table width: 900table length: 1400weight approx.: 235 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. For more information, follow the link: Iedpfx Akofk Aitoxjtf

Condition: new, table height: 650 - 1050messurements (LxWxH): 1450 x 950 x 650 bis 1050table width: 950table length: 1450weight approx.: 308This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. Itjdpfx Asgrvv Tjkxsf For more information please follow this link:

Condition: new, table height: 650 - 1050messurements (LxWxH): 1400 x 900 x 650 bis 1050table width: 900table length: 1400weight approx.: 305This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. For more information please follow this link: Iodjgrvwbopfx Akxstf

Condition: used, functionality: fully functional, power: 4 kW (5.44 HP), gearing type: hydrostat, fuel type: gasoline, Year of construction: 2004, Line marking machine: + ProSign + Speeflo Powrliner 6900 + Year of manufacture: 2004 Ijdpfex Ekwdex Akxotf + Honda GX 160 engine, 5.5 HP + Airless pump + Hydraulic drive forward / reverse + 2x front paint nozzles + 1x handheld sprayer Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typographical mistakes possible; subject to prior sale!

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital readout K&C New and 3-axis stepless feed Super CONDITION Technical data: >> Year of construction 1983 Machine no. 2102-2444 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: Iodjtwlwzspfx Akxetf >> 3-axis digital indicator K+C Newly assembled with manufacturer's warranty and operating instructions. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Coolant device >> Operating instructions, spare parts plan To the machine : We are offering a Deckel FP1 universal milling machine built in 1983 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. The FP1 was in a training workshop where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The new digital display from K&C makes work easier and even more precise. Take the opportunity to inspect and try out this little gem under power on site.

Condition: new, maximum load weight: 33,570 kg, overall weight: 39,500 kg, axle configuration: 3 axles, loading space length: 12,450 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, DOLL 3-axle semi-trailer LOGO 12 * Front wall made of fine-grain steel sheet, designed in accordance with DIN EN 12642 Code L * Welded steel chequered plate cover * 3 single axles, SAF brand, 9 t Intradisc CD disc brakes * 1st axle as lift axle * Air suspension with lifting and lowering via rotary slide valve * Manually operated landing gear * 8 x DOLL Mammut bunks and stakes * 385/65 R 22.5 tyres on steel rims Isdpfx Akex Egtlexjtf * LED tail lights with integrated triangular reflectors * 4x LED work lights (1,800 lumens) * RAL 9011 graphite black (frame + bunks), RAL 3002 carmine red (stakes) * COC document Various bolt-on accessories such as toolbox, additional support leg, and access ladder are available at extra cost. Further information available upon request. Illustrations may differ from the original. Information provided without liability. Contact: Niclas Lott Tel.:

Condition: like new (used), Year of construction: 2010, functionality: unexamined, overall weight: 3,200 kg, 5-axis rotary table with KUKA servo motors Iedeqy Hnpopfx Akxjtf

Condition: used, Table dimensions 2500x 780 mm Motor output 7,5 kW Spindle diameter nach Bedarf mm reus 1.500 - 10.000 U/min Iodexpi D Ijpfx Akxotf

Condition: new, systec P/N 8292 EC 3 three-axis system, serial no. as per photo, unused, 100% functional, scope of delivery as per photos Itedpfx Asxah S Ejkxsf

Condition: good (used), Site price: approx. 9,000 open-fronted storage stacking crates, metal, similar to type: 14/7-2, approx. 50 x 30 x 20cm, with support bar - used - : Iodpfjui Iqrox Akxotf Price (net) per piece ex site: Price for complete purchase: 9.-€ (net) / piece. For purchase of 10 pallets of 40 pieces: only 15.-€ (net) / piece For purchase of 33 pallets (truck full) of 40 pieces = 1,320 pieces: only 12.-€ (net) / piece For purchase of 66 pallets of 40 pieces each: €10 (net) / piece Manufacturer: unknown, Type: similar to SSI Schäfer 14/7-2 l (for lacquered) Dimensions: 50cm deep x 31cm wide x 20cm high Dimensions inside: approx. length: 450 x width 300 x height 190mm Quantity: approx. 9,000 pieces Green With support bar Material: sheet steel Load capacity: Individually: approx. 120kg Stack: 1.200kg Capacity: approx. 26L Weight: approx. 4kg Current stock; approx. 70 pallets of 40 crates each would be ready for immediate loading Currently 3/4 of the crates are still in use and will be further prepared for shipping in the coming weeks. Condition: good to very good Available: Partly immediately, partly in the next few weeks (please ask for the currently available stock) Location: D

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,000 mm, loading space width: 2,330 mm, loading space height: 2,400 mm, loading space volume: 51 m³, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, KEMPF SKM 36/3 SHL-Light ? 3-Axle Steel Tipper New Vehicle Expected delivery date: February 2026 General Specifications Type: SKM 36/3 SHL-Light * Design: 3-axle semi-trailer tipper with conical steel trough * Permissible gross weight: 36,000 kg * Axle load: 3 x 8,000 kg * Fifth wheel load: approx. 12,000 kg * Nominal saddle height: 1,200 mm (technical: 1,200–1,260 mm) * Loading length: approx. 9,000 mm * Loading width: front 2,280 mm / rear 2,330 mm * Trough height: approx. 2,400 mm * Trough volume: approx. 51.1 m³ * Overall height: approx. 3,805 mm to loading edge (loaded) Chassis KEMPF welded fine-grain steel construction, sandblasted * Conical-offset design (offset approx. 80 mm) * All attached parts hot-dip galvanized * Chassis color: Jet Black (RAL 9005) * Trough color: White Aluminium (RAL 9006) * Tarp color: Silver (Mehler 911) * Side (white) and rear (red) contour marking to EC Directive Axles, Tyres & Suspension SAF INTRADISC plus Integral (Offroad version) * Disc brakes Ø 430 mm * Chassis laser-aligned (optimized tyre wear & consumption) * Lift axle (fully automatic, forced lowering when unladen) * Air suspension system with compact 300-mm bellows and lift/lower device * Quick air release fitted * Load gauge, tonne graduations, front left * Tyres: 385/65 R 22.5 * Rims: Alcoa Ultra ONE aluminium rims, Dura-Bright EVO, 11.75 x 22.5, ET 120 Braking System & Safety Electronic braking system (Knorr EBS) with RSP (Roll Stability Program) * ABS 4S/2M with stop light supply * Tyre pressure monitoring to ECE R141 (TPMS) * Trailer Info Module TIM G2 with brake wear indicator * Acoustic reversing warning system * Folding underrun protection (ECE R58.03) with spring lifting aid * Removable towing coupling (right side) * Reflex panel (200 x 1,130 mm) Hydraulics Front tipper cylinder Hyva (single-circuit hydraulic system, 190 bar) * Hard-chromed piston * Hydraulic connection: Edbro 1" screw coupling * Tractor unit pressure can be adjusted if necessary Trough/Superstructure Conical steel trough (wider towards the rear) * Material: HARDOX steel (HB 450 / HB 500) * Floor: 5 mm HARDOX steel, continuous * Side walls: lower 4 mm / upper 3 mm HARDOX with reinforced edges * Front wall: 20° inclined, 3.2 mm HARDOX steel * Rear wall: * Double-winged (1/3 left, 2/3 right) * Non-swivelling, manual hook locking * Grain-tight with rubber seal * Slide gate 400 x 400 mm, manual lever operation * Rear wall approx. 40 mm lower (tarp can remain open) * Pneumatic vibrator, switch operation rear left * Catwalk with guard rail per accident prevention regulations, ladder left side, 2-step entry * Internal access via steps on the front wall * Shovel and broom mount on front wall Tarp & Roof Bows Itedpexn Eckjfx Akxef Roll tarp made of high-quality PVC (680 g/m²), color silver * 3 arched roof bows (1 fixed steel, 2 telescopic aluminium) * Crank operation right side, central locking left side * Aluminium tarp guard, swiveling and lockable * Accessories: stainless steel hooks/tension rod Lighting & Electrics Complete LED equipment to EC/ADR standard * LED three-chamber lights with chrome rings * LED rear fog lamp, LED license plate lighting * LED side markers with indicator function * Brake light (LED) * 2 additional LED reversing lights (side mounted) * Internal trough lighting (LED, switch left on frame with indicator) * Socket: 15-pin Accessories Two PVC toolboxes (each 660 x 500 x 4

Condition: new, Year of construction: 2025, Z-MaT U630 5-Axis Simultaneous Machining Center Siemens ONE, 15" LCD screen Dual-torque direct drive Travel (X/Y/Z): 750/800/600 mm Rapid traverse (X/Y/Z): 36/36/36 mm/min Cutting feed: 1-10,000 mm/min Spindle Spindle speed: 18,000 rpm, built-in Spindle taper: HSK63 (HSK100) Spindle motor: 30 kW, Siemens Air blast through the spindle Spindle air curtain Spindle oil cooler Double-arm tool changer, 30 tools (40/60/200 optional) Max. tool weight: 8 kg Max. tool length: 300 mm mm Max. tool Ø 75/120 Table Table diameter: Ø 630 mm Max. workpiece Ø 650 mm Max. table load: 850 kg T-slot (width x number x pitch): 18H8 x 7 x 80 mm Distance from spindle center to table surface: 120-720 mm A-axis travel (tilt): +-120 ° C-axis rotation: 360 degrees Max. rapid traverse A/C axes: 60/100 rpm A/C-axis encoder Standard accessories End of operation lamp 3-color status light Electric handwheel (MPG) Work area lighting Roller linear guides Automatic lubrication system (grease) 3-axis glass scales, air-operated (XYZ) Automatic Tool changer Air gun Coolant gun Coolant tank Coolant flushing system (chip flushing) Full splash guard Transformer: 400V, 50Hz Heat exchanger in the control cabinet Automatic shutdown Leveling bolts and blocks Tool box CE conformity Itedpfx Aewku Evekxsf Hinged belt chip conveyor Machine size and weight Machine dimensions (L x W x H): 2728 x 3760 x 3726 mm Machine weight: approx. 19,500 kg Subject to error and prior sale A wide range of automation options are available

Condition: new, overall weight: 18,000 kg, axle configuration: 2 axles, total width: 2,530 mm, Year of construction: 2025, Equipment: ABS, 2-axle self-steering trailer type M2K-9L * KOMPAKT steering system * Corrosion resistance through powder coating * All attachments can be screwed on * Conventional wiring * Brackets and attachments in stainless steel or galvanized * 2 single axles, BPW, 10 t with disc brakes, including safety cables. * Air suspension * Aluminum air reservoir * Stool model IX, with 1x mechanically telescopic stanchions * Tires 275/70 R 22.5 on steel rims * EBS brake system * LED tail lights with integrated triangular reflector Ijdpfxjgqc Hbj Akxetf * 4x LED work lights (1,800 lumen) * Manual central lubrication * Paint finish: RAL 9011 graphite black * Payload approx. 14,550 kg 2-axle self-steering trailer type M2K-10B * Differences to the M2K-9L: * Leaf suspension * 2 single axles, make BPW, 12 t with drum brakes, including safety ropes * Stool model IX, with 1x hydraulically telescopic stanchions * 315/80 R 22.5 tires on steel rims * Electric central lubrication * Payload approx. 14,100 kg 2-axle self-steering trailer type M2K-10L * Differences to the M2K-9L: * 2 single axles, BPW make, 12 t with drum brakes, including safety ropes * Stool model IX, with 1x hydraulically telescopic stanchions * 315/80 R 22.5 tires on steel rims * Electric central lubrication * Payload approx. 14,100 kg 2-axle self-steering trailer type M2R-10L Differences to M2K-9L: * ratio steering system (4-cylinder) * 2 single axles, BPW, 12 t with drum brakes, including safety ropes * Stool model IX, with 1x hydraulically telescopic stanchions * 315/80 R 22.5 tires on steel rims * Electric central lubrication * Payload approx. 13,965 kg Various additional equipment available. Further information on request. Illustrations may differ from the original. Information without guarantee. Contact Niclas Lott Tel:

Condition: new, maximum load weight: 30,400 kg, overall weight: 38,000 kg, axle configuration: 2 axles, loading space length: 15,215 mm, total width: 2,550 mm, total height: 1,640 mm, Year of construction: 2025, Equipment: ABS, 2-axle semi-trailer LOGO 21 * Air suspension * 2 single axles, make BPW, 12 t with drum brakes * Manual mechanical support * 8 x DOLL Mammut bolsters and stanchions * Tires 315/80 on steel rims * EBS-E brake system * LED tail lights with integrated triangular reflector * 4x LED work lights (1,800 lumens) * BEKA-MAX central lubrication pump * 2x snow chain holder * RAL 9011 graphite black (frame + bolster), RAL 3002 carmine red (stanchions) * side impact protection in accordance with ECE?R 73 * All attachments in accordance with EC regulations Various additional equipment available. Further information on request. Images may differ from the original. Information without guarantee. Iedpfsgqc Hfsx Akxjtf Contact: Niclas Lott Tel.:

Condition: new, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately and soon available units, on our website. Ijdsw U H Sbjpfx Akxetf Equipment excerpt; full equipment details available on request. Chassis: * Welded construction made from high-quality steel profiles with through cross beams, designed for high point loads * Underrun bar width approx. 700 mm * Outer frame as UNP profile * Fifth wheel plate approx. 8mm * Neck height at front approx. 130 mm Coupling device * 2-inch kingpin Rear underrun protection * Bolted version, in compliance with EC regulations Side underrun protection * According to EC regulations, made of anodised aluminium profiles Landing legs * 2 x 12 t landing legs with compensating foot and single-side operation, RHS in direction of travel Axles * 3 x 9 t air suspension axle assemblies, disc brakes 22.5” * Total stroke approx. 180 mm * Lifting and lowering device via rotary slide valve Braking system * Twin-line compressed air braking system to EC specifications, with EBS and RSS, automatic load-dependent control * Spring chamber cylinders as parking brake * Polarity-protected coupling heads permanently mounted on front cross member, without connecting line to towing vehicle Tyres * 6 off, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120, brand of our choice * Tyre pressure monitoring system (TPMS) via EBS CAN bus Mudguards * According to EC regulations Spare wheel holder not included Load securing * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 5.0 t * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 2.0 t * Drill holes for attaching lashing straps every approx. 400–600 mm in the outer frame Front wall * Reinforced fixed steel structure, approx. 1,400 mm high * Inner face lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor let into the outer frame with galvanised omega steel profiles Lighting system * In compliance with EC, 24 volt, with multi-chamber lights * LED side marker lights * Front white LED position lights * Rear LED outline marker lights * Number plate lights * LED lane departure lights * 1x15- and 2x7-pin plug connections at the front cross member Equipment * 2 wheel chocks with holders * ECE 70 warning boards * Bracket for rotating beacon, incl. rotating beacon * 2 rubber buffers at the rear * Foldable and extendable access ladder at rear right (without platform) * 1 open perforated sheet metal box, transverse to direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles Paintwork * Front wall: RAL single colour as requested * Chassis: hot dip galvanised * Outer frame: hot dip galvanised + single RAL colour as requested * Centre stanchions: single RAL colour as requested * SSV: aluminium, anodised * Rear underrun protection: white (RAL 9016 traffic white) * Attachments: galvanised / KTL black * Rims: silver Conspicuity markings * Complete set in yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets across the loading area * 20 stanchions made of galvanised tube 80/50, total length approx. 1,200 mm * Magazine for 20 removable stanchions inside the front wall * 5 x 25 side walls and rear wall made of anodised aluminium hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Side wall and stanchi

Condition: used, maximum load weight: 12,910 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2013, loading space length: 7,350 mm, loading space width: 2,490 mm, loading space height: 2,100 mm, loading space volume: 38 m³, total width: 2,530 mm, total height: 3,600 mm, Year of construction: 2013, Equipment: ABS, tail-lift, * Böse swing-wall body with roof * Internal dimensions: 7,350 x 2,490 x 2,100 mm, 18 pallets * Dekra certified according to VDI 2700 ff and DIN EN 12642 Code XL * 4 rows of load securing Itodpfsxntznjx Akxsf * 2,000 kg Bär tail lift * BPW axles * Fully air-suspended * BODY AND CHASSIS ARE FULLY INSPECTED

Condition: used, mileage: 104,459 km, power: 265 kW (360.30 HP), first registration: 06/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 07/2026, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ASR, socket in cab 12V 2-pin and 24V 2-pin, Lane-Guard-System IV (LGS IV), Emergency Brake Assist 2 (EBA2), MAN EasyStart with TipMatic side loader HS Speedline paddle fixed body PPK 29m³, pendulum baler, PLC control, color camera system 4x camera+1x monitor, lifter HSS 420 double comb for 2 MGB 80-240 liters EN 840-1 or 1 MGB 1.100 liters EN 840, electric central lubrication system, modem, MD4 control with touchscreen Itsdpsf Dhbkjfx Akxef

Condition: new, maximum load weight: 35,585 kg, overall weight: 42,000 kg, axle configuration: 3 axles, loading space length: 12,950 mm, loading space height: 1,347 mm, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, LOGO 14XL 3-axle semi-trailer especially for OFF- and ON-ROAD USE! * Electronic air suspension * 3 single axles, make SAF, 9 tons with disc brakes * 1st axle liftable, 3rd axle self-steering * Radio control for operating the frame lock and brake * Manual mechanical support * Stools: 8x ExTe D7 (item 1 with double pockets, item 2 movable and with flat stake pockets as well as with quick-release wedge system) * Stanchions: 14x ExTe D7 telescopic stanchions, 2x ExTe D10 telescopic stanchions * Tires: 385/65 R 22.5 on steel rims * EBS brake system * LED tail lights with integrated triangular reflector * 4x LED work lights (1,800 lumen) * Aluminum air tank * 1x grab rope * 1x maneuvering coupling * Frame + stool in RAL 9011 graphite black * All attachments in accordance with EC regulations Various additional equipment available. Further information on request. Illustrations may differ from the original. Information without guarantee. Contact Itodpfogqc Eaox Akxof Niclas Lott Tel:

Condition: new, maximum load weight: 35,700 kg, overall weight: 42,000 kg, axle configuration: 3 axles, loading space length: 10,735 mm, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, 3-axle semi-trailer LOGO 14X especially for OFF- and ON-ROAD USE! * Electronic air suspension * 3 single axles, make SAF, 9 t with disc brakes * 1st axle can be lifted, 3rd axle is self-steering * Radio control for operating the frame lock and the brake * Manual mechanical support * Stool: 8x ExTe D7 (item 1 with double pockets, item 2 can be moved and with flat stake pockets and with quick-release wedge system) * Stake: 14x ExTe D7 telescopic stakes, 2x ExTe D10 telescopic stakes * Tires: 385/65 R 22.5 on steel rims * EBS brake system * LED tail lights with integrated triangular reflector * 4x LED work lights (1,800 lumens) * Air tank made of aluminum * 1x grapple rope * 1x shunting coupling * Frame + stool ExTe D7 in RAL 9011 Graphite black * All attachments comply with EC regulations Various additional equipment available. More information on request. Images may differ from the original. Information without guarantee. Contact: Itedpfx Ajhnak Iskxef Niclas Lott Tel.:

Condition: used, maximum load weight: 31,663 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 12/2017, loading space length: 13,640 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 90 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2017, Equipment: ABS, * Schmitz SpeedCurtain on both sides Itsdpfxsw Sbufe Akxef * DEKRA certified according to VDI 2700 ff and DIN EN 12642 Code XL * 2 rows of load securing * Pallet box * Schmitz SaftyRoof * Sliding roof * Double rear swing doors * Disc brakes * Air suspension 2 units available

Condition: used, maximum load weight: 31,663 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 12/2017, loading space length: 13,640 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 90 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2017, Equipment: ABS, * Schmitz SpeedCurtain on both sides * Dekra certified according to VDI 2700 ff and DIN EN 12642 Code XL * 2 rows of load securing * Pallet box Itjdpfx Akjw Sburjxjf * Schmitz SaftyRoof * Sliding roof * Double rear swing doors * Disc brakes * Air suspension 2 units available