Used Beyschlag Resistance for sale (1,799)

Condition: new, Year of construction: 2026, Powerful Band Saw equipped with a movable arm that can rotate from -45° to +60°, a portable vice with quick-locking mechanism, a strain gauge for band tension, and a hydraulically adjustable arm with smooth regulation. Additionally, it features an ergonomically designed control panel, ensuring safety and comfort during operation. The maximum cutting width is 490 mm. Key Features of the Band Saw: The band tensioning wheel is equipped with a dial strain gauge that indicates the proper band tension, ensuring optimal results and blade durability. The saw frame is rigid, made of cast iron, and resistant to twisting. High-quality drive wheels are mounted inside, on which the cutting band is mounted. The control panel is ergonomic, with clearly placed buttons such as the main switch, start, stop, cooling, and band speed control buttons (slow/fast). Additionally, the panel features an emergency stop button that complies with the latest EU safety standards. The panel column contains hydraulic actuator controls, enabling precise regulation of the arm's descent speed and turning it on/off. The drive is stable, thanks to high-quality hardened and ground gears. The powerful motor is appropriately matched to the sizes of the materials being cut. The band’s guidance is reliable due to bearings in the guides that can be adjusted according to the width of the material being cut. The saw is equipped with a mechanism for automatic shut-off when the arm is lowered. The vice is solid and securely holds workpieces. A limiter for cutting workpieces is included in the set. The hydraulic actuator is reinforced, allowing precise adjustment of the arm's lowering speed using a potentiometer. The saw arm can rotate from -45° to +60°, with the lifting force adjusted using a spring. An efficient cooling system is built into the base of the saw. Workpieces can be quickly clamped in the vice. The vice can be adjusted on both sides, enabling cutting at different angles. The set includes a coolant tank with a pump. The saw’s solid body is made of cast iron, ensuring stability during cutting. The band saw's arm can be locked. The base is rigid, allowing operation at a height of approximately 95 cm, which is standard with the saw. Additional Advantages of the Band Saw: Other features include band speed regulation (35/70 m/min), quick-lock vice, movable saw arm from -45° to +60° with a scale reading, a fully functional device with an excellent price-to-quality ratio, a solid construction ensuring precise, quiet, and vibration-free operation, infinitely adjustable hydraulic arm lowering, durable carbide roller guides, reinforced worm gear with bronze components, automatic end switch, and a liquid cooling system as standard equipment. Technical Specifications: Nljdpfx Aev R Tgtsmyjd Working height: 870 mm Cutting speed: 35/70 m/min Band saw dimensions: 3770 x 34 x 1.1 mm Band saw width: 34 mm Cooling system pump power: 0.1 kW Total power: 2.8 kW Voltage: 400V Dimensions (width x depth x height): 2200 x 1400 x 1500 mm Weight: 630 kg

Condition: new, mileage: 10 km, power: 129 kW (175.39 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space volume: 17 m³, loading space length: 4,200 mm, loading space width: 2,100 mm, loading space height: 2,000 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Welcome to carmax24 Today you have the opportunity to purchase one of our selected, inspected vehicles. Expertly evaluated and high-quality vehicles have ensured high customer satisfaction since 2008. This is our daily commitment—at carmax24, you as the customer are our top priority. Iveco Daily refrigerated box truck with Zanotti Z350 refrigeration system with heating, fresh goods service 0°C 6-speed manual transmission – 129 kW, 3.0 L – Diesel Driving safety is ensured by the following systems: - ESP 9: stabilizes the driving path, prevents swerving - ASR: prevents drive wheels from spinning on slippery surfaces - ABS: prevents locking of individual wheels during braking - EBD: distributes braking force between front and rear axles - Hill Holder: prevents rollback when starting uphill - MSR: prevents drive wheels from locking due to engine braking in emergency situations (e.g. sudden release of the accelerator or insufficient downshifting) - HBA: increases brake system pressure during sudden braking - LAC: detects and adjusts to axle load distribution - TSM: reduces trailer sway - RMI&ROM: systems to prevent vehicle rollover and loss of stability Passive safety for occupants: - Driver airbag COMFORT PLUS PACKAGE: * 79297 - Upholstered full headrests, daytime logo * 00259 - Upholstered, comfortable driver’s seat Nlodpfjy T Ubvsx Amysd * 01605 - 10-inch display with navigation * 06650 - Cabin ventilation and heating system with automatic climate control * 01611 - USB port with charger * 14522 - Active ACC cruise control with radar sensor * 06555 - Fog lights ADDITIONAL FEATURES: - Dual rear springs - Mirrors up to 2.35 m width - Reversing camera - 02443 - Leather steering wheel - 72625 - Full-LED headlights (daytime running, dipped, and high beam) ISOTHERMAL INSTALLATION Internal dimensions (approx., in mm): - Length: 4200 mm - Width: 2100 mm - Height: 2000 mm * Subframe with aluminum floor profiles for increased rigidity * Body constructed with distance spacer panels, insulated * Exterior and interior panels in white polyester laminate * Double-wing rear doors, 270° opening angle, foam insulated, equipped with hardware, two hinges per door leaf * Rear door frame made of acid-resistant steel with handle * Rear doors and walls protected from mechanical damage. Aluminum bumper strip (one row) * Body frame made from anodized aluminum profiles * Number of interior light points depends on body length, switched from driver’s cabin * All materials used are PZH certified and approved for food contact * Plastic wheel arches with mud flaps above rear axles * Outline marker lights installed per current traffic regulations * Retractable entry step at the rear door * Insulated floor, waterproof plywood (15 mm), non-slip surface (Lamm) * Rubber buffers on rear door frame * Anti-overflow flap strips (set) ADDITIONAL: - Isothermal side door - Reinforcements for refrigeration unit Our special service for you: * Complete service history maintained at authorized dealers and master workshops * Winter tires available at extra cost * Warranty insurance for up to 36 months available at extra cost * We gladly accept your used vehicle as part exchange at a fair price! * Financing mediation possible

Condition: used, mileage: 39,189 km, power: 125 kW (169.95 HP), first registration: 09/2024, fuel type: diesel, empty load weight: 2,428 kg, maximum load weight: 1,072 kg, overall weight: 3,500 kg, axle configuration: 2 axles, wheelbase: 3,665 mm, next inspection (TÜV): 09/2026, fuel: diesel, color: white, gearing type: automatic, suspension: other, number of seats: 3, total length: 5,932 mm, loading space length: 3,272 mm, loading space width: 1,780 mm, loading space height: 1,940 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, had accident, onboard computer, sliding door, soot filter, traction control, Disc brakes, double passenger seat, rear step, interior trim, wooden cargo floor, L2 wheelbase, right-hand mirror electrically adjustable, H2 roof height, air suspension seat, high roof, touchscreen, partition, accident damage, heat-resistant glass, clock and tachometer, brake pad indicator, active headrest, 3-door, 1st owner, Euro6e, green environmental badge (4), steel rims, puncture repair kit, reversing camera, black, passenger airbag, sliding door on the right, navigation with color monitor, color monitor for navigation system, shift paddles, parking assist camera, parking assist sensors (rear), parking assist sensors (front), traction control, electric windows (2), seat heating, radio/MP3, outside temperature display, tinted glass, heated exterior mirrors, power steering, wood trim, electrically adjustable exterior mirrors, brake assist, comfort seats, rear-wheel drive, 3rd brake light, center armrest, country version Germany, additional equipment available, errors and prior sale excepted, trade-in possible, financing possible, please contact us, we will create a customized offer for you. Nationwide delivery possible. A50 front axle with increased load capacity, AR2 axle ratio i = 3.923, BA3 active brake assist, BH1 HOLD function, C6L multifunction steering wheel, CL1 steering wheel adjustable in tilt and height, CT1 vibration damper, CW2 omission of vehicle lowering, D03 high roof, D50 continuous partition, E07 hill-start assist, E1B storage compartment for smartphones incl. wireless charging, E1D digital radio (DAB), E1E navigation, E1U USB socket 5 V, E46 socket in the cab, E57 electrical system for trailer socket, E7M MBUX multimedia system, ES0 jump-start – contact, ES5 charging package instrument panel, EW6 pre-installation for Remote Services Plus, EY2 Live Traffic Information, EY5 Mercedes-Benz emergency call system, EY6 breakdown management, F2W winter package, F64 exterior mirrors electrically foldable, F68 exterior mirrors heated and electrically adjustable, FF4 storage compartment above roof lining, FF5 storage above windshield, FJ1 folding cover for storage compartment, FJ4 storage compartment. Nedpfx Asznzrzjmysld

Condition: new, Year of construction: 2026, The CORMAK ODL4K extraction and filtration system is a modern solution that ensures safe working conditions for operators and effective protection of laser system components against contamination and damage. Filtration at a level of 99.9% removes harmful particles and fumes, guaranteeing clean air in the workplace. ODL4K stands out with an automatic filter cleaning system, an efficient fan, and a compact, solid design that allows for easy integration with various cutting systems. An additional advantage is the ergonomic waste drawer, which allows for quick and convenient emptying of collected waste. The modern ODL4K extraction system ensures effective filtration of contaminants and protection of the most important components of the laser system. ODL4K combines automatic filter cleaning with compressed air, an efficient fan generating high negative pressure and filtration at a level of 99.9% for particles of 0.3 μm thanks to the use of appropriate filters. The system is equipped with an ergonomic dirt drawer, which allows for quick and convenient removal of accumulated dust without the need for disassembly. Additionally, thanks to the modular design, it is possible to mount extraction nozzles on both the left and right side of the device, which allows for flexible adjustment of the installation to the layout of the production hall. ODL4K is a compact, efficient and reliable solution for any laser cutting system - increasing safety, comfort and work efficiency. Nsdpfx Amswcdrveyold The main functions of the exhaust gas extraction and filtration system in the laser processing process are: Removal and neutralization of laser smoke. Ensuring work safety at the laser station and in its immediate vicinity. Extending the service life of laser systems by keeping them clean and protecting important components from contamination. The most important advantages of the CORMAK ODL4K extraction system: The extraction system has automatic filter cleaning using compressed air. Under the influence of pressure, the filter is "shaken off", which effectively cleans the filter cartridge and thus extends its service life. Thanks to this, the system maintains its efficiency for a longer period of time. The filter element used in the system is imported and made of high-quality material. The Nano-type fire-resistant filter has high filtration efficiency, retaining particles of 0.3 μm in more than 99.9%. The large dust collection drawer allows convenient collection and cleaning of dust, which makes the system easy to maintain. The motors used in the system are equipped with overload protection, thus ensuring a high level of protection and trouble-free operation. The specially developed high-performance fan wheel generates a large negative pressure, which allows effective removal of laser exhaust gas and ensures high airflow efficiency. The total purification efficiency of the system is 0.3 μm, and the efficiency is more than 99.9%, which shows the high efficiency of the exhaust in removing harmful particles from the air. In addition, it is characterized by a compact structure, which makes it easy to operate and maintain. Technical parameters: Number of filter cartridges 4 Air flow 4000 m³/h Air pressure 3000 Pa Filtration efficiency 99.99% Filter size 350x660 mm Fan power 5.5 kW Inlet diameter 250 mm Weight 420 kg Dimensions (L x W x H) 1050 x 1400 x 2250 mm

Condition: new, Year of construction: 2026, functionality: fully functional, The FM 230N transport fan is a professional solution for the local extraction of sawdust, wood chips, and dust generated during wood processing. Its compact design, durable motor, and high efficiency make this sawdust blower an ideal component of dust extraction systems in carpentry shops, workshops, and for single- or multi-spindle machines. Key Advantages Effective sawdust extraction – capacity of 1000 m³/h enables efficient removal of contaminants directly from the workplace 0.75 kW motor – provides adequate torque with low energy consumption High impeller speed – 2950 rpm ensures intensive airflow 100 mm inlet diameter – allows easy connection to commonly used machines and systems Low weight (15 kg) – facilitates easy transport and installation at various workstations Design and Technology The FM 230N fan features a closed, welded steel construction with the impeller mounted directly on the motor shaft. This design eliminates power losses associated with belt drives and minimizes vibration. The housing has been optimized for airflow, ensuring stable operation even during continuous use. The electric motor is powered by 230V at a standard frequency of 50 Hz, allowing universal application in most workshops without the need for three-phase power installation. Precision and Performance Nodpfxovu Ad Aj Amyold The FM 230N is designed for highly efficient transport of air containing lightweight wood particles. Thanks to its optimized impeller and airflow channel, the unit minimizes air resistance, enabling uninterrupted operation even with large volumes of chips and sawdust. It performs equally well as a transport fan for sawdust or as a local blower supporting woodworking machines. Applications The FM 230N is suitable for carpentry workshops, furniture manufacturing plants, and production facilities using machines that generate dust. It can operate independently or as part of a larger dust extraction system. Particularly recommended for use with: planers and jointers thickness planers spindle moulders edge banders circular saws Standard Equipment powder-coated steel housing 100 mm inlet port stable mounting base single-phase 230V motor Optional Equipment 100 mm flexible hoses dust collection bags Technical Specifications Parameter Value Motor power 0.75 kW Speed 2950 rpm Extraction capacity 1000 m³/h Inlet diameter 100 mm Outlet diameter 110 mm Voltage / Frequency 230 V / 50 Hz Dimensions (L × W × H) 430 × 400 × 340 mm Weight 15 kg

Condition: new, functionality: fully functional, Year of construction: 2026, The FM300N transport fan is a heavy-duty industrial-grade unit designed for efficient extraction of sawdust, dust, and fine wood waste in production plants and carpentry workshops. With a high capacity of 2530 m³/h and a powerful 1.5 kW three-phase motor, the unit effectively supports woodworking processes, ensuring cleanliness, safety, and smooth operation. The FM300N is a reliable sawdust blower engineered for intensive use and long service life. Key Advantages Extraction capacity of 2530 m³/h – effective contaminant removal even during high-intensity operation 1.5 kW three-phase motor – stable performance under continuous load Universal connection system – one 130 mm inlet or two independent 100 mm inlets Damage-resistant construction – durable metal housing Energy-efficient and low-noise operation – optimized power consumption and improved acoustic comfort Design and Technology The FM300N is built on a stable, welded steel frame resistant to dynamic loads and external factors typical of industrial environments. The high-efficiency aerodynamic impeller is mounted directly on the motor shaft, eliminating transmission-related power losses and ensuring long service life. The unit features two 100 mm suction ports (or one 130 mm port), allowing simultaneous operation of two workstations or connection to large-format machines. The 400 V three-phase motor provides sufficient power and operational stability in industrial facilities. A rotational speed of 2950 rpm guarantees intensive airflow, even during prolonged operation. The entire design has been optimized for easy installation and maximum use of workspace. Precision and Performance The FM300N is a dependable sawdust extraction unit capable of transporting wood by-products generated during machining—from fine sanding dust to heavier sawdust and chips. Its high airflow capacity ensures smooth operation of production workstations, reducing the risk of blockages and limiting the emission of contaminants in the working area. Applications The FM300N is intended for professional environments where durability and efficiency are essential. It can operate as a standalone sawdust fan or as part of an advanced dust extraction system. Typical applications include: carpentry workshops furniture manufacturing plants wooden component production departments workstations with circular saws, planers, spindle moulders, and sanders Standard Equipment Nljdpsvu Afgsfx Amysd powder-coated steel housing three-phase motor 400 V / 50 Hz suction port: 1 × 130 mm or 2 × 100 mm integrated base for stationary installation Optional Equipment bag filters flexible hoses Ø100 mm, Ø120 mm, Ø150 mm Technical Specifications Parameter Value Motor power 1.5 kW Speed 2950 rpm Extraction capacity 2530 m³/h Inlet diameter 130 mm / 2 × 100 mm Outlet diameter 120 mm Voltage / Frequency 400 V / 50 Hz Dimensions (L × W × H) 430 × 410 × 450 mm Weight 24 kg

Condition: new, functionality: fully functional, Year of construction: 2026, The FM300SN transport fan is a technologically advanced unit designed for extracting sawdust, wood chips, and wood dust in industrial environments. With a 2.2 kW motor and an airflow capacity of 3900 m³/h, the unit performs exceptionally well as a sawdust blower in dust extraction systems, ensuring effective air filtration and purification directly at the source of contamination. Its reliability, high performance, and compatibility with various woodworking machines make it an ideal choice for professional wood processing facilities. Key Advantages 2.2 kW motor – designed for intensive continuous operation High extraction capacity of 3900 m³/h – efficient removal of sawdust, chips, and dust Impeller speed 2950 rpm – optimal airflow with stable operation Universal suction ports – 1 × 150 mm and 3 × 100 mm for connecting multiple machines simultaneously Steel construction – resistant to mechanical damage and adapted for industrial conditions Design and Technology The FM300SN is based on a welded construction made of thick, powder-coated steel, ensuring resistance to impacts, vibration, and heavy-duty use. The aluminum impeller is mounted directly on the motor shaft, providing high efficiency and minimal energy loss. The fan is designed for three-phase 400 V / 50 Hz power supply, ensuring stable operation in industrial facilities without the risk of system overload. The suction port system (3 × 100 mm and 1 × 150 mm) allows multiple machines to be connected simultaneously or enables the use of reducers depending on the dust extraction system requirements. Precision and Performance The FM300SN stands out for its high efficiency in transporting sawdust and dust, even in heavily contaminated environments. Carefully optimized aerodynamic parameters ensure constant airflow, minimizing the risk of blockages within the system. As a result, the fan not only maintains a clean working environment but also extends the service life of connected machines by reducing their exposure to process dust. Applications The FM300SN is designed for environments requiring highly efficient sawdust and chip extraction systems during woodworking operations. It is particularly recommended for: carpentry workshops furniture manufacturing plants production of solid wood panels and components central dust extraction systems in production halls Compatible with machines such as: planers and jointers Nledpfx Aovu Amkjmyod thickness planers spindle moulders sliding table saws edge banders Standard Equipment powder-coated steel housing three-phase 400 V motor aluminum impeller with direct drive suction ports: 1 × 150 mm and 3 × 100 mm Optional Equipment flexible hoses Ø100 mm, Ø120 mm, Ø150 mm filter bags Technical Specifications Parameter Value Motor power 2.2 kW Speed 2950 rpm Extraction capacity 3900 m³/h Inlet diameter 150 mm / 3 × 100 mm Outlet diameter 120 mm Voltage / Frequency 400 V / 50 Hz Dimensions (L × W × H) 440 × 430 × 450 mm Weight 30 kg

Condition: new, Year of construction: 2026, The most powerful centrifugal fan FAN5500 reaches a capacity of up to 8000m3/h. The high vacuum created by the blade system at the right angle and the high motor power can cope with the toughest jobs.Thanks to the many years of experience of our CORMAK team, radial fans from the FAN series have been created. The design of a new technological line allowed us to create the LineWind metal turbine system. This is the most important feature of the centrifugal fans, enabling them to extract all kinds of pollutants with increased vacuum power thanks to a special blade system that has been profiled at the right angle. The centrifugal fan was developed for use in the carpentry, furniture, automotive, agricultural and manufacturing industries. Radial fans are used for: transport of shavings, sawdust, small granulates dusty air local exhaust ventilation drying systems dehumidifiers Multi-vane metal rotor! High efficiency ensured by a balanced impeller Thermal winding protection (thermal sensor). The extraction design has been enhanced with additional anti-vibration feet in the base to guarantee a stable and vibration-free operation of the unit. An emergency shutdown button meets the requirements of the PN-EN ISO 12100 and PN-EN ISO 13850 standards. An additional advantage is the use of branded flexible and resistant seals in sensitive areas, allowing high vacuums to be achieved without losses at individual connection points. Reliability confirmed by Polish users who enjoy working with our machines every day. Technical specifications MAX. AIR CAPACITY 8000 m3/h inlet diameter 300 mm discharge diameter 250 mm Nljdpfx Amevughljyod ENGINE SPEED 2850 rpm DIMENSIONS 670 x 600 x 600 mm MOTOR POWER / VOLTAGE 5.5 kW/400 V WEIGHT 55 kg

Condition: new, Year of construction: 2026, The centrifugal fan allows for operation with increased vacuum power to extract various types of pollutants, thanks to a special blade system which has been profiled at an appropriate angle. The radial fan has been developed for use in the carpentry, furniture, automotive, agricultural and manufacturing industries. Thanks to the many years of experience of our CORMAK team, radial fans of the FAN series were created. Designing a new technological line allowed us to create the LineWind metal turbine system. This is the most important feature of the centrifugal fans, enabling them to extract all kinds of pollutants with increased vacuum power thanks to a special blade system that has been profiled at the right angle. The centrifugal fan was developed for use in the carpentry, furniture, automotive, agricultural and manufacturing industries. Nlsdpfxsvugg Ue Amyed Radial fans are used for: transport of shavings, sawdust, small granulates dusty air local exhaust ventilation drying systems dehumidifiers Multi-vane metal rotor! High efficiency ensured by a balanced impeller Thermal winding protection (thermal sensor). The extraction design has been enhanced with additional anti-vibration feet in the base to guarantee a stable and vibration-free operation of the unit. An emergency shutdown button meets the requirements of the PN-EN ISO 12100 and PN-EN ISO 13850 standards. An additional advantage is the use of branded flexible and resistant seals in sensitive areas, allowing high vacuums to be achieved without losses at individual connection points. Reliability confirmed by Polish users who enjoy working with our machines every day. Technical specifications MAX. AIR CAPACITY 4000 m3/h inlet diameter 200 mm discharge diameter 180 mm ENGINE SPEED 2850 rpm DIMENSIONS 575 x 550 x 500 mm MOTOR POWER / VOLTAGE 2,2 kW / 400 V WEIGHT 35,5 kg

Condition: new, functionality: fully functional, Year of construction: 2026, Product characteristics: The Cormak 2-ton gantry crane is a specialized industrial machine designed for moving heavy loads in industrial halls. It consists of many elements, including a supporting frame, a trolley and other components that enable easy, safe and precise movement of loads horizontally and lifting and lowering them using hooks. The model is distinguished primarily by its durability and stable construction, thanks to which it can be used in difficult industrial conditions. This crane is also resistant to torsion, which is ensured by additional reinforcements used in the structure. One of the most important features of the crane are four return rollers that ensure easy movement of heavy loads. These rollers are extremely durable and abrasion-resistant, which guarantees their long service life. Another important element are the built-in parking brakes, which ensure safe stopping of the crane in any place. Height adjustment on the device is easy and safe when the lever is not loaded and with the help of two screws securing each bracket. The crane's structure is durable and stable, and its ease of use makes it an ideal solution for companies that need an efficient and reliable machine for moving heavy loads. Moreover, the multitude of retrofitting options allows it to meet even more applications and tasks in various industrial sectors. Thanks to its efficiency and precision, the overhead crane is a versatile work tool that can be additionally equipped with rope or chain winches. After using a block, an overhead crane with a winch or chain allows for even more precise and effective movement of heavy loads. As a result, it is used in many industrial sectors, such as construction, metallurgy and the chemical industry. Using a gantry crane, you can carry out warehouse, assembly, loading and unloading works, as well as repairs. All these activities are performed with high precision and safety, which in turn translates into higher quality of work. Technical parameters: Load capacity: 2000 kg Double T-carrier: 100 x 180 mm Height: 2400 mm – 3600 mm Nledpfjridh Nsx Amysd Width: 2360 mm Weight: 168 kg Overhead crane without a winch visible in the photos

Condition: new, functionality: fully functional, Year of construction: 2026, Beam extensions for gantry cranes – increase the reach of your crane Beam extensions are professional accessories for gantry cranes that allow you to increase the working width of the structure. They are used wherever the standard crane width is insufficient – particularly in wide production halls, warehouses and industrial facilities. Manufactured from durable and resistant materials, they ensure reliability and long service life even in intensive working environments. Greater functionality and safety The extensions allow for easy adaptation of the crane to individual requirements, expanding its range of applications without the need to purchase a larger model. The maximum lifting capacity of the crane with extensions is 800 kg. However, it should be noted that when the extension exceeds 200 mm, the load capacity is further reduced. For this reason, it is essential to follow the manufacturer’s guidelines and carry out regular technical inspections of all crane components, including the extensions. Key product features: Enable quick and safe increase of the crane’s working width Nljdpfx Amsycqh Nsysd Simple installation – the set includes two extensions ready for mounting Robust construction – high-strength steel profiles Operational safety – compliant with industrial standards and health and safety requirements Compatible with CORMAK gantry cranes and other structurally compatible models Usage guidelines: Gantry crane extensions should be used in accordance with the manufacturer’s recommendations, particularly with regard to the reduction in load capacity after installation. The minimum extension width is 200 mm, and each additional increase results in a further reduction of the maximum lifting capacity. Regular technical inspections and proper maintenance are essential to ensure full operational safety. Applications of beam extensions The product is ideally suited for industries such as logistics, industrial manufacturing, steel structure assembly, the automotive industry and others. Versatility, durability and build quality make it an excellent choice for companies that expect flexibility and reliability from their equipment. By choosing CORMAK beam extensions, you invest in efficiency, functionality and safety. Extend the capabilities of your gantry crane and adapt it to changing production or warehouse requirements! Technical parameters: Length 520 mm Width 131 mm Height 70 mm Number of pieces per set 2 Set weight 20 kg

Condition: new, functionality: fully functional, Year of construction: 2026, Characteristics of the gantry crane: An overhead crane with a lifting capacity of up to 1 ton is a versatile device that can be used in various areas, such as unloading, loading, repairs, warehouse work, assembly and many others. It is an extremely useful tool in halls, workshops and warehouses where effective moving and lifting of heavy objects is needed. The device has been specially designed to work on horizontal and flat floors, allowing easy movement along straight lines. Thanks to four return rollers, the crane ensures smooth movement around the working space, and parking brakes ensure safe stopping in appropriate places. Adjusting the unloaded height of the crane is simple and safe thanks to a lever and two safety screws on each bracket. Additionally, the stability and durability of the crane are ensured by a solid structure and additional transverse struts that ensure torsion resistance. Nodpfx Ameridgroyeld An additional advantage of an overhead crane with a lifting capacity of up to 1 ton is the possibility of installing a trolley with a manual drive, which allows for even greater flexibility and freedom of movement on tracks or guides. Advantages of the gantry crane: Designed for loading and unloading, assembly, repair or storage work in workshops and halls on horizontal and smooth floors Easy to move and install using four return rollers with parking brakes Easy and safe height adjustment when unloaded via a lever and two securing screws per bracket Stable and durable, torsion-resistant structure thanks to additional transverse struts Possibility to install a trolley with a manual drive Technical parameters of the crane: Load capacity 1000 kg Height 2500 mm – 3600 mm Width 2300 mm Double T carrier 76 x 140 mm Total width (base) 2400 mm Upper beam width 2550 mm Total height 2520 mm / 3720 mm Working width for winch 1750 mm Support frame tensioners 4 pcs Transverse reinforcements of the supporting beam 2 pcs Weight 142 kg The overhead crane can be retrofitted with rope or chain winches after using a block or trolley. Overhead crane without a winch visible in the photos

Condition: new, functionality: fully functional, Year of construction: 2026, Internal combustion forklift truck with a 3,500 kg lifting capacity Design and technology The forklift is equipped with reinforced load-bearing components, a durable frame, and a hydraulic system designed to operate under maximum load. The Nissan K25 engine is a proven power unit known for its high overload resistance and low fuel consumption. The Power Shift automatic transmission ensures smooth driving, increasing operator comfort and safety, especially during frequent direction changes. Pneumatic tires with increased diameter and deep tread perform exceptionally well on ramps, loading yards, and both paved and unpaved surfaces, effectively absorbing vibrations and reducing suspension wear. Precision and operational efficiency The side-shift mechanism allows horizontal fork movement, significantly reducing cycle time during storage and unloading operations. Manual fork spacing adjustment enables quick adaptation to different pallet sizes. Forward and backward mast tilt improves safety when handling heavy loads, facilitating precise placement and stabilizing the load during travel. Standard equipment Nissan K25 engine Side shift – lateral fork movement Nodpfoycvv Sex Amyeld Mast tilt adjustment (forward/backward) Manual fork spacing adjustment Pneumatic tires LED work lights Reverse alarm and warning lights Technical data Load capacity: 3,500 kg Lift height: 3,000 mm Fork height (lowered): 40 mm Fork length: 1,220 mm Side shift: Yes Mast tilt: Yes Engine: Nissan K25 Engine power: 50 HP Transmission: Automatic Travel speed (loaded/unloaded): 12 / 13 km/h Tire type: Pneumatic Overall length: 3,800 mm (L) Overall length without forks: 2,580 mm (L’) Wheelbase: 1,740 mm (L1) Distance from front axle to fork face: 487 mm (L2) Fork length: 1,220 mm (L4) Single fork width: 120 mm (W) Overall width: 1,225 mm (W1) Rear width: 970 mm (W2) Fork carriage width: 1,000 mm (W3) Outside fork spread: 1,060 mm (W5) Maximum lifting height: 3,000 mm (H) Overall mast height (lowered): 2,120 mm (H1) Overall mast height (raised): 4,250 mm (H2) Fork height above ground: 150 mm (H3) Overall height to overhead guard: 2,090 mm (H4) Mast ground clearance: 120 mm (H5) Ground clearance: 120 mm (H6) Load center distance: 500 mm (C) Rated capacity: 3,500 kg (Q) Single fork thickness: 40 mm (T) Mast tilt angle (forward): 6% (α) Mast tilt angle (backward): 12% (β) Weight: 4,700 kg

Condition: new, Year of construction: 2026, functionality: fully functional, This cabin pressure washer made of high-quality stainless steel is a tool that raises cleaning standards to a new level. Designed with professional applications in mind, this washer offers reliability, durability and performance. Made from high-grade stainless steel, it provides durability and resistance to environmental conditions, ensuring long-lasting performance even in the most demanding working conditions. Unit description: With a robust stainless steel construction, our cabin washer is corrosion resistant and provides long-lasting performance even in harsh environments. Equipped with advanced pressure technology, it provides effective removal of dirt, oil, grease and other contaminants from a variety of surfaces. Our cabin pressure washer is an essential tool for businesses that value cleanliness, efficiency and reliability. It will make cleaning tasks easier, faster and more efficient, resulting in customer satisfaction and improved productivity. Cleaning takes place in a closed circuit, using a washing liquid heated to as much as 70 degrees Celsius. The product is discharged from the gun nozzle at a pressure of up to 8 bar, thus thoroughly cleaning hard-to-reach areas and heavily soiled parts of scale, grease or oil. Both the temperature and the fluid increase cleaning efficiency. It has adjustable, level feet. The washer is equipped with a dual-function gun from which either air alone or air with detergent can be discharged. This allows the washed object to be dried with compressed air. Using a cabin pressure washer made of stainless steel has many advantages, including: 1. thanks to the high water pressure combined with detergents, the washer removes even the most stubborn dirt such as oil, grease and rust, ensuring clean and shiny surfaces. 2. the cabin washer enables larger surfaces to be cleaned quickly and effectively in less time than traditional manual cleaning methods. 3. with different pressure setting options, the washer can be adapted to different types of surfaces and types of dirt, making it a versatile cleaning tool. 4. made from high quality stainless steel, the washer is corrosion and damage resistant, ensuring a long service life and minimising the need for maintenance. 5. the cabin washer is easy to operate, allowing operators to quickly learn how to use it and achieve professional results without lengthy training. 6. with its fast and effective cleaning, the cabin washer contributes to increased productivity, which can lead to time and cost savings for the company. Using a cabin pressure washer is not only an investment in cleanliness, but also in efficiency and durability, which translates into benefits for both companies and individual users. Parameters of the MP180 pressure washer: Washer capacity 180 litres Nljdsuc Tpyepfx Amyjd Frequency 50 Hz Weight 56 kg Voltage 230 V Height with legs 1450 mm Height without legs 920 mm Internal width 740 mm Internal height (to open lid) 410 mm Internal depth 500 mm Loading height 360 mm Loading width 700 mm

Condition: new, Year of construction: 2026, 200L sandblasting cabinet is an efficient and professional device designed for precise cleaning and surface preparation of metal and other hard materials. Thanks to a blasting gun with a compressed air control valve integrated into the handle, the operator can precisely control the blasting force, allowing safe work on both delicate components and heavy-duty structures. The cabinet is designed for intensive use in industrial and workshop environments. Nsdpfxsy E Hnfe Amyeld Main advantages Adjustable blasting gun – allows pressure control directly at the handle for maximum precision Ergonomic workspace – illuminated cabinet ensures comfortable and safe operation, even during long work cycles Durable steel construction – resistant to mechanical damage and corrosion, built for heavy-duty workshop use Air efficiency – air consumption of 400–700 L/min enables effective blasting of a wide range of components Versatile application – ideal for wheels, automotive parts, and industrial components Construction and technology The 200-liter sandblasting cabinet features a spacious working chamber measuring 760 × 510 × 470 mm, allowing convenient handling of larger components. Its rigid steel frame and sealed cabinet design ensure operator safety and limit dust emission into the environment. An extraction port with a diameter of ø 63 mm enables connection to an external dust extractor or cyclone system, significantly improving visibility and workplace cleanliness. Precision and performance Adjustable pressure settings and the ergonomic blasting gun design allow the operator to tailor parameters to the material type and required precision. This makes the unit suitable for both delicate cleaning of light alloys and intensive removal of paint coatings, rust, and industrial contaminants. Air consumption in the range of 400–700 L/min ensures continuous and stable operation without compromising quality. Applications The 200L sandblasting cabinet is intended for professional users, including: Automotive and motorcycle workshops Industrial plants and tool rooms Metal restoration companies Custom manufacturing and technical service providers Paint shops and electroplating facilities Ideal as a metal sandblaster, it performs well wherever precise surface preparation is required before processes such as painting, galvanizing, welding, or bonding. Standard equipment Sandblasting gun with pressure control valve in the handle Integrated cabinet lighting Built-in protective gloves Transparent inspection window Technical specifications Air consumption: 400–700 L/min Working capacity: 200 L Power supply: 230 V Weight: 46 kg Cabinet dimensions: 760 × 510 × 470 mm Total height with stand: 1410 mm Extraction port diameter: ø 63 mm Additional information: self-assembly required.

Condition: new, functionality: fully functional, Year of construction: 2026, KDP1000 Cabinet Sandblaster – Industrial Sandblasting Cabinet for Wheels, Structures, and Metal Components The KDP1000 cabinet sandblaster is an advanced machine designed for intensive industrial use in automotive, shipbuilding, aerospace, and commercial service environments. Its impressive 1000-liter tank capacity and spacious 850-liter working area allow processing of large components—from wheels and rims to housings and heavy structural parts. High build quality and reliability make the KDP1000 a professional metal sandblasting solution for the most demanding users. Key Advantages of the Machine Large 1000-liter working capacity – ideal for processing oversized components. Dust-free operation thanks to tight perimeter seals – protects both the environment and the operator. Closed-loop system – minimizes dust emissions in the workplace. Efficient DC15 cyclone dust extractor included – ensures effective removal of abrasive particles. Supports various abrasives: corundum, glass beads, quartz sand, emery. Nljdpfx Amsx Dkx Njysd Easy abrasive replacement – thanks to a built-in drain at the bottom of the tank. Complete equipment package: gloves, handheld gun, fixed gun, and air-blow gun. Construction and Technology The KDP1000 sandblasting cabinet is engineered for heavy-duty operation. Its robust powder-coated steel construction ensures resistance to abrasion and environmental factors. The enclosure is easy to maintain, and the sealed working system significantly reduces dust emissions, increasing operational safety. The hose-based blasting system located at the bottom of the tank ensures stable abrasive flow. The large working area and convenient access to the cabin enable efficient handling of workpieces and optimal use of the workspace. Precision and Work Efficiency A working pressure range of 4–8 BAR allows adjustment of blasting intensity according to the surface type and condition. Powered by 230V and equipped with a reliable pneumatic system, the KDP1000 cabinet sandblaster ensures consistent, repeatable results. Built-in lighting and a wide viewing window provide excellent visibility and control over the cleaning process, even in hard-to-reach areas of the workpiece. Applications The KDP1000 model is widely used in various industrial and service sectors. It is ideal as: Wheel sandblaster – restoration of steel and aluminum rims, Surface preparation tool before powder coating, welding, galvanizing, Metal sandblaster – removal of rust and coatings from steel profiles, fittings, and structural components, Equipment for cleaning engine parts, housings, casings, suspension components, and mechanical details. Standard Equipment 2 integrated rubber work gloves Handheld sandblasting gun Fixed internal blasting gun Air blow-off gun 7 ceramic nozzles DC15 cyclone dust extractor Technical Specifications – KDP1000 Cabinet Sandblaster Parameter Value Working pressure 4–8 BAR Capacity 1000 L Abrasive media corundum, glass beads, sand Working area 850 L Power supply 230 V, 50 Hz Weight 149 kg Internal cabin dimensions (W × D × H min/max) 1120 × 900 × 420/820 mm Overall dimensions 1270 × 1000 × 1800 mm

Condition: new, Year of construction: 2026, KDP350 Cabinet Sandblaster is an efficient surface treatment and cleaning machine for metal components, designed for professional workshops, industrial facilities, and refurbishment services. The 330-liter working chamber and two side doors with full-seal gaskets ensure convenient access and dust-free operation. The set includes a DC15 cyclone dust extractor, which effectively removes dust generated during operation. This unit is ideal for sandblasting wheels and other metal parts requiring precise cleaning. Key Features of the KDP350 Sandblaster Large working chamber – 330 liters capacity allows processing of larger components. Two side doors – on the right and left sides for easy loading and part handling. Dust-free operation – thanks to sealing gaskets and extraction ports (63 mm and 90 mm). Gun with ceramic nozzles – includes 4 interchangeable tips (4, 5, 6, 7 mm) for precise blasting. Illuminated work area – improves visibility and accuracy during operation. Integrated gloves – abrasion-resistant and protect the operator’s hands. Compatible with various abrasives – such as quartz sand, glass beads, silicon carbide, emery, and plastic granules. Standard Equipment DC15 cyclone dust extractor with filter and hose 12V fluorescent lamp (powered by 230V, with switch) 2 integrated rubber gloves Blasting gun with 4 ceramic nozzles (sizes: 4, 5, 6, 7 mm) 4 protective films for the viewing window 2 dust extraction ports: 63 mm and 90 mm diameter 2 side doors with full-circuit sealing User manual in Polish Technical Specifications of the KDP350 Sandblaster Specification Value Nledpow H N R Ssfx Amyod Working capacity 330 L (0.33 m³) Operating pressure 4 - 8 bar Air consumption 400 - 700 l/min Air inlet 1/4" quick coupling Viewing window area 580 x 270 mm Doors 2 pcs (left and right sides) Dust extraction ports Ø63 mm and Ø90 mm Internal dimensions 890 x 655 x 360/610 mm External dimensions 960 x 720 x 1500 mm Weight 88 kg Note: The machine is delivered in parts and requires self-assembly according to the included manual.

Condition: good (used), Year of construction: 2010, functionality: fully functional, milling height: 180 mm, WEINIG NKT Dovetail Grooving Line – Double Unit DP20 An industrial dovetail grooving and gluing machine – developed for maximum precision and efficiency. Technical specifications: Wood input length: min. 130 mm | max. 1000 mm Wood output length: min. 3700 mm | max. 7400 mm (half lengths possible!) Wood cross-section: min. 20 x 40 mm | max. 80 x 180 mm Cutter diameter: 370 mm Dovetail design: Vertical / Horizontal, 10/11 dovetails, 3.8 mm pitch Glue application: 2-sided, PVAC white glue Connection power: 80 kW Note: The machine is currently disassembled and is in our warehouse. An inspection is possible by appointment. Scope of supply: WEINIG NKT Double Unit DP20 including control unit Integrated gluing station for 2-sided application Operating manual & documentation Hydromat 17B (7 spindles) General information Manufacturer: Weinig AG Model: Hydromat 17B // 7 spindles (various tools) Type: High-performance profiling milling machine / planing and rabbeting machine Year of manufacture: 1989 Operating voltage: 380 V / 50 Hz Bottom-Right-Left-Right-Left-Top-Bottom table, fixed Description Heavy-duty, high-performance planing and rabbeting machine made of vibration-damping and torsion-resistant cast iron components in a modular system. Designed for precise and economical woodworking with high continuous output. Mechanical feed, adjustable in the range of 5 – 35 m/min, feed motor 5.5 kW (7.5 HP). Surfacing table 2 m long, quick adjustment available. Chip removal for surfacing and jointing spindles, adjustment range 10 mm each. Technical data • Feed speed: 5 – 35 m/min, mechanical Nsdpfx Aoznum Ssmyjld • Feed motor: 5.5 kW / 7.5 HP • Operating voltage: 380 V / 50 Hz • Table length: 2000 mm • Adjustment range of chip removal: 10 mm (surfacing and jointing side) • Machine design: Without counter bearing, in high-performance design

Year of construction: 2022, condition: good (used), functionality: fully functional, machine/vehicle number: 919-313-239-i, For sale is a used thermography camera including protective housing. FLIR A400, Image Streaming, 42° Serial number: 91901277 Scope of delivery: - Cardboard packaging - Infrared camera with lens Nodpfox Ifafjx Amyjld - Ethernet cable M12 to RJ45, 0.3m - Calibration certificate with login data ##### TOPA ML protective housing for FLIR A400/A500/A700 including 3" germanium window High protection class and chemical resistance: IP67 Rugged design made from anodised aluminium profile Vibration-resistant mounting with effective heat dissipation Dimensions: 96 x 96 x 227mm (W x H x L), excluding cable glands ##### Climate unit for TOPA protective housing with temperature monitoring and emergency shutdown Free-standing unit with high-performance pump, fans and radiator for continuous monitoring of camera temperature and water flow with emergency shutdown in the event of a fault. Typically, the system allows camera operation in ambient temperatures from -50°C to 200°C. The maximum distance between camera and climate unit is 20 meters. The height difference must not exceed 5.7 meters. The scope of delivery includes cables and hoses for a distance up to 3 meters. Includes: - Water cooling module for mounting on TOPA protective housing - Climate unit - 12VDC, 40W power supply unit for DIN rail mounting - 6m NBR hose (-20°C to +80°C continuous temperature) - 3m high-temperature cable with temperature sensor - 3m DC connection cable - 250ml coolant concentrate

Condition: new, Year of construction: 2026, CORMAK TORNADO 360×1250 VARIO Universal Lathe The CORMAK TORNADO 360×1250 VARIO is a professional conventional lathe designed for precision metalworking in manufacturing facilities, toolrooms, and maintenance workshops. Its robust construction, 1,250 mm distance between centers, powerful 2.4 kW motor, and Camlock D1-5 spindle mounting provide outstanding rigidity, stability, and repeatable machining accuracy, even during demanding cutting operations. Key Advantages of the CORMAK TORNADO 360×1250 VARIO Universal Lathe 1,250 mm distance between centers allows machining of workpieces up to 1,000 mm between the chuck and tailstock center, making it suitable for long shafts and cylindrical components. Hardened and precision-ground 205 mm bed offers excellent wear resistance while effectively minimizing vibration. 52 mm spindle bore enables machining of larger-diameter stock without additional preparation. Camlock D1-5 spindle nose provides quick, secure, and rigid chuck mounting. 2.4 kW motor delivers high torque at low spindle speeds and maintains reliable performance under load. Variable spindle speed (VARIO) from 70–2,000 RPM allows precise adjustment to suit different materials and machining operations. Supports both metric and imperial thread cutting, making the machine highly versatile. Compatible with 16 × 16 mm cutting tools, allowing the use of professional turning tool holders. Rigid Construction for Superior Machining Accuracy The lathe features a heavy-duty cast iron frame designed to minimize vibration during machining. Its substantial weight and wide guideways provide excellent rigidity, while the hardened and precision-ground bed maintains its geometry even under intensive industrial use, ensuring consistently accurate machining and high-quality surface finishes. The spindle is supported by precision bearings and equipped with a Camlock D1-5 spindle nose for rapid chuck changes and maximum rigidity. The 52 mm spindle bore allows larger-diameter materials to pass through the spindle, expanding the machine's machining capabilities. Standard Equipment Machine stand 200 mm 3-jaw chuck with internal and external jaws 200 mm 4-jaw independent chuck with internal and external jaws Set of 7 turning tool holders (16 × 16 mm) Faceplate Thread dial indicator Fixed steady rest Follow rest 2-axis digital readout (DRO) Chip tray and tool drawer Coolant system LED work light Technical Specifications Specification Value Swing over bed 360 mm Swing over cross slide 220 mm Distance between centers 1,250 mm Bed width 205 mm Maximum tool size 16 × 16 mm Spindle bore 52 mm Spindle taper / spindle nose MT6 / Camlock D1-5 Spindle speed range 70–2,000 RPM (variable) Metric threads 20 ranges, 0.25–5 mm Imperial threads 25 ranges, 4–60 TPI Longitudinal feeds 15 ranges, 0.05–0.5 mm/rev Cross feeds 15 ranges, 0.02–0.2 mm/rev Compound slide travel 95 mm Cross slide travel 180 mm Tailstock quill diameter 46 mm Tailstock taper MT4 Tailstock quill travel 100 mm Motor power 2.4 kW Power supply 400 V Overall dimensions (L × W × H) 1,930 × 850 × 1,600 mm Nljdpfxoznt Rps Amysd Weight 600 kg

Condition: new, Year of construction: 2026, CORMAK TORNADO 360×1000 VARIO Universal Lathe The CORMAK TORNADO 360×1000 VARIO is a professional conventional lathe designed for precision metalworking in manufacturing plants, toolrooms, and maintenance workshops. Its rigid construction, 1,000 mm distance between centers, powerful 2.4 kW motor, and Camlock D1-5 spindle mounting ensure excellent rigidity, stability, and repeatable machining performance, even during demanding cutting operations. Key Advantages of the CORMAK TORNADO 360×1000 VARIO Universal Lathe 1,000 mm distance between centers enables machining of long shafts, sleeves, and other extended workpieces. Hardened and precision-ground bed (195 mm wide) provides excellent wear resistance and effectively dampens vibrations. 52 mm spindle bore allows machining of larger-diameter bar stock without prior preparation. Camlock D1-5 spindle nose ensures fast, secure, and rigid chuck mounting. 2.4 kW motor delivers high torque at low spindle speeds and reliable performance under load. Variable spindle speed (VARIO) from 75–2,000 RPM allows precise adjustment for different materials and machining operations. Supports both metric and imperial thread cutting, increasing the machine's versatility. Accommodates 16 × 16 mm cutting tools, making it compatible with professional turning tool holders. Rigid Construction for High Machining Accuracy The lathe is built around a heavy-duty cast iron frame whose substantial weight and wide guideways effectively minimize vibration during machining. The hardened and precision-ground bed maintains its geometry even under intensive use, ensuring consistently high machining accuracy and excellent surface finish. The spindle is mounted on precision bearings and features a Camlock D1-5 spindle nose for quick chuck changes and maximum rigidity. Its 52 mm spindle bore enables machining of larger-diameter materials, expanding the machine's application range. Standard Equipment Machine stand 200 mm 3-jaw chuck with internal and external jaws 200 mm 4-jaw independent chuck with internal and external jaws Set of 7 turning tool holders (16 × 16 mm) Faceplate Thread dial indicator Fixed steady rest Follow rest 2-axis SINO digital readout (DRO) Chip tray and integrated tool drawers Coolant system LED work light Technical Specifications Nlsdpfx Amoznt I Isysd Specification Value Swing over bed 360 mm Swing over cross slide 225 mm Distance between centers 1,000 mm Bed width 195 mm Maximum tool size 16 × 16 mm Spindle bore 52 mm Spindle taper / spindle nose MT6 / Camlock D1-5 Spindle speed range 75–2,000 RPM (variable) Metric threads 20 ranges, 0.25–5 mm Imperial threads 25 ranges, 4–60 TPI Longitudinal feeds 15 ranges, 0.05–0.5 mm/rev Cross feeds 15 ranges, 0.02–0.2 mm/rev Compound slide travel 95 mm Cross slide travel 180 mm Tailstock quill diameter 32 mm Tailstock taper MT3 Tailstock quill travel 90 mm Motor power 2.4 kW Power supply 400 V Overall dimensions (L × W × H) 1,700 × 850 × 1,600 mm Weight 550 kg

Year of construction: 2026, condition: used, New: Yes Nlodpfx Aoznr Dbomyed Empty weight: 400 kg Dimensions of cargo space: 150 x 130 x 107 cm CE mark: yes Please contact Team DPX for more information AC400V-200kW Automatic Load Bank Rated Voltage: 3P4W AC400V 50/60 Hz Rated Voltage & Frequency: 400VAC; 3 phase 4 wire, 50/60 Hz Power Supply: 3P5W AC400V 50 Hz Rated Power: 200 kW at 400V Duty Cycle: Continuois Cooling Type: Forced Air Cooling (Horizontal air intake and exhaust cooling, there will be louver at air outlet and inlet.) Load Steps: Resistive Load: 9 steps, 1, 2, 2, 5, 10, 10, 20, 50, 100 kW Wire Connection: - Load bank input— busbar (star coupling “Y”) - Control power input—terminal block Communication Interface: RS232/RS485

Condition: used, Year of construction: 2006, machine/vehicle number: TP106, Used Capping Machine AROL T stopper year 2006 Machine Description of the Capper AROL KAMMA PKV The machine is specifically designed for efficient and reliable bottling with T-stoppers in industrial settings. With its five heads, the machine precisely manages each step of the process. Consequently, it maintains closure quality consistently while operating at high production speeds. Cap Gripping System To ensure effective stability during cap positioning, the machine’s vacuum-based gripping system secures each cap, which significantly reduces the risk of errors or misalignment. Moreover, an integrated vacuum pump powers this mechanism, ensuring a firm and consistent grip on each cap throughout the process. Adjustable Capping Head One key advantage of the AROL capping machine is its adjustable-height capping head, which easily adapts to various bottle sizes. As a result, this versatility makes the machine suitable for different production formats. Therefore, it increases both efficiency and operational flexibility. Cap Distribution System An alveolar centrifugal distributor manages cap distribution, ensuring uniform and consistent delivery. Furthermore, this component minimizes the risk of jamming. Thus, it keeps the workflow continuous, which is essential for maintaining high and uninterrupted production. Safety and Materials The Used Capping Machine AROL T stopper year 2006 includes safety guards, which effectively protect operators throughout operation. Additionally, the machine’s stainless steel exterior provides strength and corrosion resistance, which are both critical for use in the food and beverage industries. Nljdpfx Ajyhbymsmyed Production Speed and Inverter Control Thanks to its inverter control, operators can easily adjust the machine’s speed, allowing it to meet specific production demands. Consequently, the AROL capping machine can reach a production capacity of approximately 7,000 bottles per hour. Thus, it offers an ideal combination of efficiency and flexibility to satisfy market needs. Bottle Flow Configuration With its left-to-right bottle feed (clockwise flow), the machine optimizes the production line layout. This setup, therefore, integrates smoothly into existing systems, reducing installation time. In turn, it supports continuous production and maximizes operational efficiency. Production Year of the Capper AROL KAMMA PKV Manufactured in 2006, the Used Capping Machine AROL T stopper combines reliability with proven technology. Even though it was produced years ago, the machine still upholds high-quality standards. Hence, it offers companies a reliable and versatile capping solution.

Condition: used, mileage: 10 km, power: 130 kW (176.75 HP), first registration: 07/2026, fuel type: diesel, next inspection (TÜV): 04/2028, color: white, gearing type: automatic, emission class: euro6, number of seats: 6, total length: 6,204 mm, total width: 2,098 mm, total height: 2,330 mm, loading space length: 2,700 mm, loading space width: 2,040 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, * Exhaust system, EU6e (EC) * All-wheel drive 4x4 * 8-speed automatic transmission for 4x4 * 4-cylinder turbo diesel engine, 2.0 l / 130 kW (4V) * BIT, common-rail base engine: TK1/TK4 * Start-stop system with brake energy recuperation * Trailer coupling, fixed * Standard wheelbase 3,640 mm * Rear crossmember in wider design with L = 1,899 mm and H = 258 mm, bolted * Rear axle differential lock (manually switchable, mechanical) * Rear axle 'Standard' * Approved as a 3.5t vehicle * Front axle, reinforced * 4 steel wheels 6 1/2 J x 16, with 1,200 kg load capacity, in black * Tires 235/65 R16C 115/113 R, optimized for low rolling resistance * All-season tires * Immobilizer, electronic * Electrical terminal block and wiring harness * 'Climatronic' air conditioning in the cab * Daytime running lights with assistant driving lights and coming and leaving home function * LED main headlights with LED daytime running lights * Fog lights incl. cornering light * Position lights on the roof, front * Preparation for a rotating beacon at the front * Rear lights * Side marker lights * Headlight cleaning system, windshield washer fluid level indicator, heated windshield washer nozzles * Step lighting * Exterior mirrors, electrically adjustable and heated * Exterior mirrors left and right, convex, with integrated LED turn signal and wide-angle area * Normal roof * Rear window * Chassis with double cab * Windshield wiper intermittent control with light and rain sensor * Laminated windshield with heat-insulating glazing, heated * Airbags for driver and front passenger, with front passenger airbag deactivation * Roof console with storage compartments, two 1-DIN slots and reading light * Sun visors, foldable and swiveling sideways * Electronic parking brake * Premium interior noise damping measures * Glove compartment with lockable flap, illuminated * Safety interior mirror, dimmable * Leather multifunction steering wheel, heated with Tiptronic * 12-V socket, cup holder * Three-point automatic seat belts with height adjustment * 12-V socket in the cab (in the instrument panel) * Seat belt warning, E-contact in the seat belt buckle * 2 remote control keys * Keyless Go * Auxiliary water heater, with remote control * Chrome package * Bench seat for 4 in the 2nd row of seats * Suspension seat 'ergoActive' on the left * Suspension seat 'ergoActive' on the right * Seat covers in fabric 'Toronto Grid' * Seat heating for driver and front passenger seat, separately adjustable Nodpfsznqzxjx Amyeld * Digital instrument cluster * Tire pressure monitoring system * USB Type-C data and charging ports with increased charging power * 4 loudspeakers: 2 tweeters, 2 woofers * Digital radio reception (DAB+) * MAN Media Van Navigation Business package (12.9 inch) * MAN SmartLink * MAN Connect * Comfort telephony with LTE and wireless charging * With voice control * Hill start assist * Emergency brake assist * ESP with electronic differential lock, anti-slip regulation (ASR) and ABS * Parking assistance system (PDC) front and rear * ACC Stop & Go * Traffic sign recognition * Preparation for rear view camera * High beam assistant 'Light Assist', driver alert system and fatigue warning * Emergency assistant (active lane keeping assistant and emergency assist and traffic jam assistant) * Intelligent speed assist * Multifunctional front camera * Cruise Assist Plus * Platform body with aluminum sideboards, lashing eyes, step * Platform body accessories: cab protection grille * Stone chip protection * Const

Condition: reconditioned (used), Year of construction: 2015, Number of spindles 9 St. Working width 240 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 7,5 kW Working speed 6-36 m/min weight of the machine ca. 6500 kg Control CONTROL 100 PC PLUS SCM Topset XL, Year of Manufacture 2015; currently undergoing partial recondtionning in stock ----- Summary: - 9 spindles (including 4 x HSK 85 S) - Electronic horizontal and vertical positioning - 8,300 rpm - SCM "Set-up" - SCM "T-Set" - Includes workpiece infeed magazine Working dimensions: - Maximum working width: 240 mm - Minimum working width: 25 mm (reducible to 15 mm via installed special kit) - Maximum working height: 120 mm - Minimum working height: 10 mm (reducible to 6 mm via installed special kit) Special working cross-section equipment: Equipped with a special kit for extremely small minimum cutting dimensions of 15 x 6 mm. Infeed table and table surfaces: - Infeed table length: 2,500 mm (2.5 meters) - Surface finish: Wear-resistant, special chrome-plated finish for optimal sliding properties and minimal wear. Spindle specifications: 1. Spindle: 1st horizontal spindle (BOTTOM): - Motor power: 11 kW - Speed: 6,000 rpm - Shaft: High-precision spindle, 40 mm diameter 2. Spindle: 1st vertical spindle RIGHT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning Nedpfx Amozl Hbijyeld 3. Spindle: 1st vertical spindle LEFT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning - Tool diameter adjustment "SET UP": Electronic regulation of tool diameter, tool diameter positioning 4. Spindle: 2nd vertical spindle RIGHT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning 5. Spindle: 2nd vertical spindle LEFT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning - Tool diameter adjustment "SET UP": Electronic regulation of tool diameter, Tool diameter positioning 6. Spindle: 1st horizontal spindle (TOP): - Motor power: 11 kW - Speed: 8,300 rpm - Shaft: High-precision spindle, 40 mm diameter (working length 250 mm) - Tool clamping: "T-SET" quick-clamping system for tools - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning - "SET UP" tool diameter adjustment: Electronic tool diameter regulation, tool diameter positioning 7. Spindle: 2nd horizontal spindle (BOTTOM): - Motor power: 11 kW - Speed: 8,300 rpm - Shaft: High-precision spindle, 40 mm diameter (working length 250 mm) - Tool clamping: "T-SET" quick-clamping system for tools - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning 8. Spindle: 2nd horizontal spindle (TOP): - Motor power: 11 kW - Speed: 8,300 rpm - Shaft: High-precision spind...