Used Bevel Gear Testing Machine for sale (76,353)

Condition: used, Year of construction: 1983, max. wheel diameter 1500 mm gear width 550 mm max. module 25 min. module 2 workpiece weight max. 6000 kg max. number of teeth 432 min. number of teeth 12 table diameter 990 mm grinding wheel size 400 mm Ndsdpfsyq Szaex Ab Aec total power requirement 75 kW weight of the machine ca. 20,5 t With tailstock max. wheel dia. 1250mm, without tailstock 1500mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2015, overall weight: 16,000 kg, total height: 2,200 mm, total length: 4,410 mm, total width: 2,600 mm, GROB C6-A – Cold Rolling Machine Technical Data: Gear Module: up to approx. 2.3 Gear Diameter: approx. 8–80 mm Max. Clamping Diameter: approx. 315 mm Power: 25 kW Nsdpez E Ra Hefx Ab Aedc Weight approx.: 16,000 kg Dimensions (LxWxH) approx.: 4410 x 2600 x 2200 mm Year of construction: 2,015 Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: No

Condition: good (used), Year of construction: 2011, functionality: fully functional, GERIMA - The beveling machine is specifically engineered for high-precision processing on both linear and non-linear edges, with full adaptability to varying sheet thicknesses and geometries. Ndjdpfxstmrkre Ab Aoc -Featuring an advanced Trace Tracking System, it intelligently detects and follows complex part contours—ensuring accurate, consistent, and efficient beveling, even on intricate components.

Condition: new, Year of construction: 2016, 1 unit of a completely overhauled, unused industrial bevel-helical gearbox from ASUG. TGL 21815. All gearbox parts have been replaced, with the exception of the housing!!! Clutch: 800 mm (only one half available) Maximum torque: 27,829 Nm Gear ratio: i = 1:80 Maximum power: 51 kW Oil capacity: 170 kg Speed: n1 = 1400 Speed: n2 = 17.5 Weight: 1450 kg Shaft diameter d1: 65 mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Ndjdpfx Abjgwlrde Ajc Overall height h2: 925 mm Length of base: 1170 mm !! The gearbox does not have an oil cooler !!

Condition: excellent (used), For sale: professional TRUMPF TruTool TKA 500 (1A1) plate edge beveller / chamfering machine. This machine is designed for making weld preparations and machining edges on steel plates. Nsdpfsz Slpljx Ab Ajdc Condition: used, fully operational, normal signs of use visible in the photos. Industrial-grade equipment – made in Switzerland / Germany. Technical data: Power: 1400 W Supply voltage: 230 V / 50–60 Hz Current: 6.5 A Model: TruTool TKA 500 (1A1) Year of manufacture: 2009 Manufacturer: TRUMPF Applications: Bevelling plate edges before welding Chamfering for V and X weld joints Processing of structural and machine steel Workshops, fabrication, steel construction Scope of delivery: TRUMPF TruTool TKA 500 beveller Original TRUMPF transport case Manufacturer’s manual / documentation Accessories as shown in the photos The equipment is ready for operation. On-site inspection possible. Shipping or personal collection – to be arranged.

Condition: used, Year of construction: 2020, max. wheel diameter 1.000 mm gear width 500 mm Ndjde Ad Rlgjpfx Ab Asc max. module 2 min. module 50 Control Klaassen table load of rotary table max. 3.000 kp dia. of 3 jaw chuck 365 mm dimensions of the machine ca. 2,85x1,5x2 m

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, position of the milling head: Schwenkbar (45°), table diameter: 4,000 mm, total length: 13,300 mm, gear diameter: 5,000 mm, total height: 5,700 mm, total width: 7,500 mm, input frequency: 50 Hz, workpiece diameter (max.): 5,000 mm, type of input current: three-phase, milling length: 600 mm, spindle speed (max.): 125 rpm, spindle speed (min.): 10 rpm, travel distance X-axis: 2,750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 1,750 mm, overall weight: 115,000 kg, distance table to spindle center: 3,300 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, The ZFWZ 5000 originates from Modul's Chemnitz gear machining division and is completely overhauled and delivered with a Siemens Sinumerik ONE control system by Serwema Retrofit Solutions, the company that houses the Modul drawing archive. Proven kinematics, new electrical system, new drives, new safety technology: you get the performance of a new machine at a fraction of the price and with a delivery time of twelve months. Nodpfx Asz Etmpob Aodc The machine mills external gears, both straight-toothed and helical, up to a module of 40 in hobbing and up to a module of 50 in single-indexing. With the internal milling attachment, internal gears are produced for gear rings of large roller bearings, rotary couplings, and planetary hollow gears, as used in wind power, mining, crane, and shipbuilding technology. Workpieces up to 5000 mm in diameter can be accommodated on the 4000 mm table, the milling head pivots by ±45°, and the 82 kW drive power at the milling head allows for roughing with high chip volume as well as finishing with precision. Technical data: max. workpiece diameter 5000 mm, table diameter 4000 mm, distance from milling spindle axis to table axis 300–1800 mm, distance from milling spindle axis to table surface 550–3300 mm, max. milling cutter diameter 500 mm, max. milling cutter length 600 mm, tangential travel 600 mm, milling cutter speed 10–125 rpm, drive power of milling head 82 kW, swivel angle ±45°. Installation dimensions approx. 13.3 × 7.5 × 5.7 m, weight approx. 115 t. The machine is delivered with a new Siemens Sinumerik ONE control system and Sinamics S120 drives, the latest Siemens generation with full availability of spare parts and support, in an air-conditioned switch cabinet of our own manufacture. The user-friendly interface makes setup and programming possible without in-depth G-code knowledge. The geometry acceptance is carried out according to the manufacturer's standard or DIN, with a protocol, jointly with you in Chemnitz. The scope of delivery also includes a machine safety fence with state-of-the-art safety technology, a new paint finish in RAL 5015/7035, a magnetic chip conveyor, circulation and loss lubrication, a hydraulic unit, a coolant system, and the operating manual.

Condition: ready for operation (used), throat depth: 150 mm, overall weight: 80 kg, Reicherter Stiefelmayer BRIRO VAK Hardness Tester, including VAT. Manufacturer: Reicherter Type: BRIRO VAK Outreach: approx. 150mm Max. test height: 250 - 300mm Weight: approx. 80 kg You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Ndedpfx Absznh Nyj Aec Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data as well as errors in the description of the article may occur and are subject to change.

Condition: ready for operation (used), Gear shaping machine STANKO 5M150 Max. diameter of gears that can be cut: 800 mm Njdpfx Aoqcvkvob Aedc Max. module: 12 mm Max. cutter stroke: 200 mm Saddle indexing gear diameter: 360 mm Distance between axes (tool and table): 0-700 mm Largest tool diameter: 200 mm Cutter arbor diameter: 44.443 mm Taper: M5 Table diameter: 800 mm Distance from floor to table: 870 mm Indexing gear diameter: 762 mm Table hole diameter: 120A mm Double stroke per minute (s.p.m.): 33-188 mm Range of table feed rates per cutter double stroke: -Circular: 0.2-1.5 mm -Radial: 1-5.4 mm Table rapid rotation speed: 1.7 rpm Table rapid travel speed: 137 mm/min Cutter rapid rotation speed: 3 rpm Main electric motor power: 4.8; 5.7; 7.5 kW Dimensions: 3100x1800x3500 mm Weight: 10200 kg

Condition: excellent (used), Year of construction: 1991, max. wheel diameter 10 - 330 mm gear width 180 mm max. module 7 min. module 0,5 clamping length 420 mm number of teeth 10 - 600 max.helical angle +/- 45 ° turning speeds 1100 - 1900 U/min grinding wheel diameter 280 - 350 mm Ndjdpfxozd Hgio Ab Aec grinding wheel width 84 - 104 weight of the machine ca. 5,1 t dimensions of the machine ca. 4,5 x 6,0 x 2,3 m

Condition: ready for operation (used), Assfalg ASO 650 S Edge Milling Machine, Chamfering Machine, Deburring Machine Ndsdpfjzy E D Sex Ab Aec Maximum chamfer width: 0-7mm Angle adjustment: 15°-45° Dimensions: approx. 400 × 500 × 300 mm Weight: approx. 52 kg Radius [mm]: 1.2 | 2 | 2.5 | 3 | 4 | 6 You are welcome to visit us for an inspection. We can gladly arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data as well as errors in the description of the item may occur and are subject to change.

Condition: used, Year of construction: 2004, Technical details: max. wheel diameter: 130 mm Njdpfx Abovi Nins Aodc gear width: 25 mm module max. : 3 module min. : 0,5 control: Siemens 840D work-spindle diameter: 85 mm strokes - infinitely variable: 500 - 2500 Hub/min stroke: 30 mm total power requirement: 48 kVA weight of the machine ca.: 11,5 t space requirements approx. LxWxH: 4,7 x 3,0 x 3,3 m Equipment: -Counterholder with tip -chip conveyor -hydraulically operated counterholder arm and linear guides i.D. *

Condition: good (used), Year of construction: 2014, Manufacturer: MIBA Type: LNF65 Control: SIEMENS 840D Year: 2014 Specifications Metric US Standard There are (currently) no specifications for this machine. Dimensions (estimated) Length 0 mm Width 0 mm Height Nodowq Hqkjpfx Ab Asdc 0 mm Weight 0 kg Please note: The information on this page has been provided to the best of our knowledge and, as far as possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you verify all important details.

Condition: used, max. wheel diameter 300 mm gear width 200 mm Nedpfxjxu Ntto Ab Aedc max. module 12 min. module 0,5 total power requirement 2 kW weight of the machine ca. 1 t dimensions of the machine ca. 0,8 x 1,2 x 1,5 m

Condition: used, Year of construction: 1993, max. wheel diameter 330 mm gear width 180 mm Ndedpot Hwyfofx Ab Aec total power requirement 12 kW weight of the machine ca. 7500 kg

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure Ndodpoq Ii Dlefx Ab Aoc The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, position of the milling head: Schwenkbar (40°), total length: 6,100 mm, gear diameter: 180 mm, total height: 3,450 mm, total width: 2,975 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 4,000 rpm, spindle speed (min.): 300 rpm, travel distance X-axis: 100 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, overall weight: 8,400 kg, tool diameter: 80 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A high-performance machine for series production: the horizontal Gleason-Pfauter P 210 L, built in 2003, mills shafts, pinion shafts, and small gears up to module 4 and 180 mm in diameter at speeds of up to 4,000 rpm on the cutter and 1,000 rpm on the workpiece – designed for short cycle times and dry machining. Serwema Retrofit Solutions, Chemnitz, completely overhauls the machine and delivers it with Siemens Sinumerik ONE, the latest generation of control systems with full spare parts and support availability. Modern Gleason-Pfauter kinematics, new electrical system, new drives, new safety technology: you get the performance of a new machine at a fraction of the price, and we will inspect it together with you in Chemnitz. The horizontal design makes the P 210 L ideal for shaft machining: workpieces up to 830 mm are clamped between the spindle and tailstock, with 300 mm of axial travel and 100 mm of radial travel (center distance 30–130 mm). The milling head pivots by ±40°, and the tangential travel of 160 mm utilizes the full cutter length of 170 mm for long tool life. The high workpiece speed allows for multi-tooth hobbing cutters and thus the cutting performance required in the gearbox and automotive component supply sector. The machine is prepared for connection to a loading portal or a robot. Nodpjz Et Rzjfx Ab Aodc Technical data: max. workpiece diameter 180 mm, max. module 4, working area radial 100 mm (30–130 mm), axial 300 mm (260–560 mm), tailstock 350 mm (480–830 mm), max. cutter diameter 180 mm, max. cutter length 170 mm, tangential travel 160 mm, cutter speed 300–4,000 rpm, max. workpiece speed 1,000 rpm, swivel angle ±40°, total connection value 50 kVA. Installation dimensions approx. 6.1 × 3.0 × 3.5 m, weight approx. 8.4 t. The machine will be delivered with a new Siemens Sinumerik ONE control system and Sinamics S120 drives in an air-conditioned control cabinet manufactured in-house. The user-friendly interface makes setup and programming possible without in-depth G-code knowledge. Geometry acceptance is carried out according to the manufacturer's standard or DIN with a protocol. The scope of delivery also includes the complete machine enclosure with state-of-the-art safety technology, a new coat of paint in RAL 5015/7035, a magnetic chip conveyor, circulation and loss lubrication, a hydraulic unit, a coolant system, and the operating manual.

Condition: good (used), WANDERER 16/E milling machine, made in Germany. Year of manufacture: 1962. The machine is operational and in working condition. Ndodsw Al U Eepfx Ab Asc For more information, please contact us.

Year of construction: 2015, operating hours: 100 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 4S 10kN 2268/000 1215 902, Dyna-Mess TP 10kN HF Cyclic Testing Machine / Endurance Testing System – Top Condition, including temperature chamber (up to 120°C) & software Description: Manufacturer: DYNA-MESS Prüfsysteme GmbH Model: TP 10kN HF (Servopneumatic High-Frequency Cyclic Testing Machine) Maximum test force: 10 kN (static and dynamic range) Maximum machine travel: 12 mm Date of purchase: December 2015 Condition: Almost new, very little use, immediately ready for operation (Plug & Play) Availability: Immediately For sale is a compact, high-precision cyclic testing machine from the premium manufacturer DYNA-MESS with a 10 kN nominal load and 12 mm stroke. The system was acquired for dynamic endurance tests and lifetime determination as part of a research project, and has not been used since. It is in excellent, virtually new condition both visually and technically. The complete package includes a matching temperature chamber with controller up to 120°C. This enables standard-compliant, dynamic testing of components and materials under realistic thermal environmental conditions. System & Scope of Supply: Load frame Dyna-Mess TP 10kN HF with high-precision force and displacement sensors. Complete PC including installed and calibrated control software DYNA-TCC under Windows 7. The system operates completely independently and is immediately ready for use. Temperature chamber with external control unit for tests up to 120°C. All associated documentation and connection cables. The machine is perfectly suited for laboratories, universities, or quality assurance departments looking for a reliable system for fatigue and endurance testing without incurring the cost of a new machine. Inspection of the machine is possible by prior arrangement. As this is a commercial sale, the machine is sold ex works without warranty or guarantee. The sale is preferably to a buyer who arranges self-collection (dismantling and transport must be organized by the buyer). Ndedpfszunz Nsx Ab Asc Price: €20,000 negotiable plus VAT.

Condition: used, Year of construction: 2008, max. wheel diameter 700 mm max. module 10 (8) min. module 1 Nodpjyv Ipfofx Ab Aedc table diameter 530 mm Table speed max. 350 1/min Distance of shafts 50 - 680 0 workpiece weight 4.000 kg Axial travel 1.000 mm tangential adjustment 300 mm pivoting angle + / - 45 Grad power capacity 32 kW spindle turning speed range 3.500 - 12.000 U/min tool diameter 320 mm total power requirement 80 kW weight of the machine ca. 25,00 t

Condition: used, Instron Wolpert V-Testor 4562 Low-Load and Microhardness Tester High-quality and extremely robust low-load hardness tester from the renowned manufacturer Instron Wolpert, model V-Testor 4562 (V-Testor 2 series). These mechanical-optical precision instruments are known for their exceptional durability and reliability in material testing, metallography, and quality assurance. The device is ideally suited for hardness tests according to the Vickers method (HV) in the low-load range. Ndsdezniayepfx Ab Aoc Application area: It is typically used to determine the hardness of thin films, surface structures, small precision parts, or metallographic samples in laboratories and for quality assurance. Technical data & details: Manufacturer: Instron Wolpert GmbH Model: V-Testor 4562 Testing method: Vickers (low-load range) Optics: Integrated precision measuring microscope for evaluating the indentations Application area: Hardness determination of metals, thin films, and surface structures You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: excellent (used), Material Testing Machine / Universal Testing Machine Type: BT2-FZ1.0TN.D16.001 Base System: zwickiLine Z1.0 TN Special Torsion Multi-Axis Material Testing System 1 kN / 2 Nm Technical Data: Testing Range: Maximum axial testing force Fmax: 1 kN Configured maximum testing torque Mmax: 2 Nm Types of tests: Tensile, compressive, and torsional Axial drive / crosshead: Crosshead speed: 0.0005 to 2,000 mm/min Max. return speed: 2,000 mm/min Speed deviation: max. 0.05 % Path resolution: 0.0554 µm Positioning repeatability: ±2 µm Controller: adaptive Control cycle: 1,000 Hz Testing chamber: Testing chamber height with crosshead angled upwards: 235 to 1,065 mm Testing chamber height with crosshead angled downwards: 90 to 920 mm Testing chamber depth: 105 mm Dimensions of base machine: Height of load frame without head crosshead: approx. 1,289 mm Width with machine electronics: approx. 411 mm Depth with machine electronics: approx. 622 mm Weight of base machine: approx. 76 kg Type: Torsional drive Item No.: 1023835 Maximum drive torque: 20 Nm Rotational speed: 0.01 to 20 rpm Accuracy of set drive speed: 0.05 % Control cycle: 1,000 Hz Axially permissible testing force on the torsional drive: ±5 kN Power connection torsional drive: 230 V / 1 Ph / N / PE Mains frequency: 50 / 60 Hz Power consumption under full load: approx. 2.3 kVA Torque sensor: Item No.: 069536 Rated torque: 2 Nm Limit torque: 150 % of the rated torque Accuracy class 1 from: 0.008 Nm Accuracy class 0.5 from: 0.02 Nm Protection class: IP65 Force sensor: Type: Zwick / Roell Xforce HP Item No.: 069531 Rated force: 1 kN / 225 lbf Max. operating force: 150 % of Fnom Accuracy class 1 from: 2 N Accuracy class 0.5 from: 10 N Protection class: IP54 Measurement and control electronics: Zwick / Roell testControl II Measurement value acquisition rate: 400 kHz Measurement value transfer to PC: 500 Hz Optionally expandable to: 2,000 Hz Control cycle: 1,000 Hz PC interface: Ethernet Measurement signal runtime correction: for all channels Protection class electronics: IP32 Safety device: Swiveling front safety device Electrically monitored interlock Protective screen made of transparent polycarbonate Material thickness of protective screen: 6 mm Dimensions of safety device: Height: approx. 1,237 mm Width: approx. 435 mm Depth: approx. 238 mm Testing tools / accessories: Pneumatic universal holder for pen systems Max. clamping force: 200 N Compressed air supply: 8 bar, filtered and unlubricated Pneumatic 3-finger gripper Max. clamping force: 50 N Compressed air supply: 8 bar, filtered and unlubricated Alignment unit Torque sensor 2 Nm Xforce HP force sensor 1 kN Torsional drive Front safety device Zwick/Roell machine electronics Software: Zwick / Roell testXpert III testing softwareVersion: 1.2 + ALMEMO 2450 universal measuring device Humidity/temperature sensor FHAD4641 + Mettler Toledo precision balance Type: Mettler WXSE + Visual recognition system color Zwick Item No.: 3004644 Vision sensor: IV-G500CA Evaluation unit: IV-G10 Njdpfxjzwvtxs Ab Asdc Installation distance: 20 to 500 mm + Auto Injector Condition: used Optical condition according to the pictures Functionality according to the pictures The complete configuration of all components and accessories, as well as the calibration of the system, must be carried out by the customer themselves. Subject to changes, errors and prior sale.

Condition: excellent (used), Year of construction: 2016, Technical specifications: Automatic cutting and beveling machine Pipe diameter: 50 – 330 mm Max. sheet thickness: 15 mm Cutting angle: 30 – 37.5° CNC control: PRO-Face Motor power: 30 kW CE mark Dimensions (length x width x height): approx. 3100 x 2600 x 2000 mm Nodpfx Abswlahlj Aedc Machine weight: approx. 3.6 tons Additional equipment: 2 roller conveyors, each 6000 mm wide Chip conveyor The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Haida Type: HD-B604-S Sensor: TECSIS load cell Max. Capacity: 2T / 20 kN Unit: G, kg, N, LB (adjustable) Resolution: 1/250,000 Ndjdpezgr Eiofx Ab Aoc Accuracy: ± 0.5% Max. Stroke: 700 mm (without fixture) Test speed: 0.1-500 mm/min (adjustable) Voltage: 220V AC ± 10%, 50/60Hz Chuck: 0-7 mm Weight: approx. 175 kg Dimensions (W x D x H): 88 x 50.5 x 150 cm Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by phone.

Condition: ready for operation (used), CAPE BRAND EPAL BEVELING MACHINE WORKING. MAXIMUM SIZE 2500mm Ndedek Nf S Uspfx Ab Aec