Used Atm Recyclingsystems Gmbh Arno®Handle for sale (75,438)

Condition: refurbished (used), S&F Oscillating Screen | Screening Machine Type ASM-200 Kdodszbvy Iepfx Abfsn reconditioned | refurbished with new screen box, new bearings (flange bearings) and new vibration elements (rubber buffers) Manufacturer: S&F GmbH Type: ASM-200 Year of manufacture: 2004 Screening capacity: approx. 25 m³/h (for wood chips, depending on material) Fractions: 3 Screening area: 2.0 m² per screen mesh size Screening decks: 2 pieces Mesh size of the screen: - 1st screening deck: punched perforated plate screen, D = 40 mm or as per agreement - 2nd screening deck: punched perforated plate screen, D = 8 mm or as per agreement Drive power: 1,5 kW, 3 x 400 V, 50 Hz L x W x H: 3,200 x 1,800 x 1,450 mm Design: ECO Line Machine weight: approx. 1,300 kg Machine colour: RAL 7040 Window Grey // Protective housing: RAL 3020 Traffic Red Screen inserts freely selectable Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood - Bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Screening machine for wood chips

Condition: as good as new (ex-display), Flat, upright / Ø: 60 x 10 mm / 500 mm Solid, square / Ø: 35 x 35 mm / 900 mm Tube, round / Ø: 70 x 2 mm / 1000 mm Shaft diameter: 50 mm Roll diameter: 138 mm bending speed: 4,5 / 9 m/min Kjdpfxepxmauo Abfsdn voltage: 400 V motor power: 0,6 / 0,9 kW dimensions WxDxH, approx.: 780 x 1040 x 1470 mm Weight, approx.: 360 kg Equipment: - Machine in stable welded steel construction - Roll drive via gearbox - Hardened rolls (standard roll set included) - Shafts hardened and ground - All switching and operating elements on mobile control panel with foot pedal for right/left rotation - Manuel adjustable straightening rolls - Can be used horizontally and vertically Options on request: - Hydraulic top roller infeed - Two-stage motor - Digital display - Brake motor for the production of precision sheets - Roll sets

Condition: new, Sheet thickness max.*: 2.5 mm Working speed: 5 1/min shaft length: 250 mm shaft diameter: 65 mm motor power: 1,5 kW Connection: 400 V Weight, approx.: 400 kg * Material strength 400 N/mm2 without stop Kdsdpfxopxl U Tj Abfsn Features: - Extended application range due to 8 different pairs of rollers available as an option - Upper shaft with quick adjustment and stable clamping - Axially movable stop plate for high repeat accuracy - Operation via foot pedal, thus both hands free to hold the workpiece - Powerful drive motor for processing sheets up to 2.5 mm steel plate - High accuracy due to precision bearing mounted shafts - For economical production of a wide range of beading types Scope of delivery: - Beading rollers -Mobile foot pedal control panel - workpiece stop - roller wrench

Condition: new, Compact hydraulic guillotine shears, ideal for metal and container construction. The generous support arms and the table with integrated rollers make the alignment and processing of large workpieces precise and easy. Operation is via a foot pedal, leaving your hands free to align the workpiece. Technical data: Cutting length: 1320 mm Sheet thickness: 3.5 mm Strokes / min: 35 - 47 Number of hold-down devices: 9 Downholder pressure: 2.5 t Front support arms: 1000 mm Back gauge: 600 mm Cutting angle: 1/2 - 2° Motor power: 5.5 kW Equipment: - High-quality, high-alloy shear blades with a high chrome content - Upper blade with 2 cutting edges, lower blade with 4 cutting edges - Hydraulic cutting angle adjustment - Manual cutting gap adjustment (from 4.5 mm) - Generous support arms with adjustable stop - Lateral stop with double scale - Feed worktable with ball rollers - Full-length front intervention guard - Hydraulic, independent hold-down device - Manual back gauge 600 mm - Overload-protected hydraulic system - Safety foot switch Options: - Hydraulic sheet holding device - Increased motor power for more strokes / min - Back gauge with lifting function - Extended support arm (1500 / 2000 / 3000 mm) - Extended front side stop (1500 / 2000 / 3000 mm) - Angle stop with scale - NC back gauge 800 mm with M15S control unit Ksdpfetvnczex Abfodn - CE conformity

Condition: new, Technical data: Drilling capacity steel Ø: 50 mm Drilling capacity cast iron Ø: 60 mm Tapping steel Ø: 40 mm Tapping capacity cast iron Ø: 50 mm Diameter of the column: 300 mm projection (min/max): 305 - 1275 mm travel of the spindle head (horizontal): 970 mm distance spindle nose - base plate (min/max): 438 - 1330 mm Traverse height of the cantilever: 625 mm Clamping surface of cube table : 635 x 520 x 420 mm size base plate : 1830 x 785 x 185 mm spindle mounting: MK 5 spindle stroke: 270 mm Speeds: (12) 44 - 1206 min-1 Kedep Atipjpfx Abfedn feeds: (3) 0.06 / 0.10 / 0.20 mm/rev. Motor power, approx.: 3,7 kW Total height, max.: 2795 mm Weight, approx.: 2300 kg Features: - Simple one-button operation with integrated circuit for automatic release of swing arm movement, automatic stop and automatic clamping. - Boom arm and drill head with independent hydraulic clamping. - A special lift safety device prevents the arm from falling off abruptly or moving on its own, even after a long period of use and corresponding wear. This safety device protects the operator from injury even if the threaded nut is excessively worn. - The column, arm and gearbox can be clamped simultaneously by pressing a button. Standard Equipment: - Threading device - Coolant device incl. pump - machine light - cube table 635 x 520 x 420 mm - Operating tools in box - Operating instructions and spare parts list - protection device for spindle - CE

Condition: new, Infinitely variable pillar drill with fully-fledged tapping unit. Equipped with digital speed display as standard. Drilling table adjustable via rack and swivels around the column. Motor protection. Technical data: Drilling capacity: 40 mm Thread cutting: M 24 Spindle: MK 4 Drilling depth: 150 mm Spindle speeds, infinitely variable Range A: 65 - 540 1/min Range B: 245 - 2000 1/min throat depth: 265 mm Quill feed: 0.05 / 0.1 / 0.2 mm/rev Column diameter: 115 mm Table size: 560 x 470 mm / 14 mm Base plate size: 685 x 485 mm Kedoqfdywopfx Abfjdn Dimensions, approx. (W x D x H): 580 x 950 x 2000 mm Connected load: 1.7 kVA Weight, approx.: 370 kg Equipment - Gearbox reduction gear - Large machine table - Digital speed display - Stepless speed adjustment - Thread cutting device - Table clamping and height adjustment from the front - Drilling depth stop - Overload protection Scope of delivery: - Coolant device - Two MK 3/2 reducing sleeves - LED machine light - Height-adjustable protective cover with micro limit switch - Operating instructions - CE/IEC conformity

Condition: new, Continuous drilling capacity: 25 mm Normal drilling capacity: 30 mm Thread cutting capacity: M 12 Kdedod R Acbepfx Abfsn Spindle: MK 3 Drilling depth: 135 mm Infinitely variable spindle speeds: 150 - 3000 rpm Table size: 460 x 360 mm Weight: 225 kg Power supply: 400 volts, 50 Hz Equipment: - Thread cutting device - Digital display for speed as standard - Coolant device - LED machine light - Continuously variable speed adjustment - 24 V electrics - Base plate with T-slots - Drilling table adjustable via rack and worm gear and can be swiveled around the column - Emergency stop button - Full motor protection - Star grip - CE compliant

Condition: new, Drilling capacity max.: 35 mm Thread cutting: M 24 Tool rear ham: MK 4 Spindle speeds, infinitely variable: 65 - 2000 rpm Extension: 265 mm Drilling depth: 150 mm Pinole feed: 0.05 / 0.1 / 0.2 mm/U Column diameter: 115 mm Table size / T groove size: 685 x 485 mm / 14 mm Engine power: 1.5 kW Machine dimensions (W x D x H): 950 x 580 x 2000 mm Weight approx.: 385 kg Characteristics: - Vario drive for infinitely variable adjustment of the desired speed - Pinole delivery either by hand or by mechanical feed - Set speed by means of digital display quickly and easily readable - Stable casting table with T-slots and coolant gutter - Adjustable drilling depth stop, drilling depth can be read by scale - Thread cutting device - Gearbox pre-bed - CE / IEC, German Documentation and German Service Delivery: - Table clamping and height adjustment from the front - Quick-clamp chuck 1 - 16 mm / B 18 Kdedpfx Aod Sd Tvjbfon - Drill chuck mandrel MK 3 / B 18 - Coolant device - Digital speed display - Reducing sleeves MK 3/2, MK 3/1 - LED machine light - Height-adjustable protective cover

Condition: new, Stepless pillar drilling machine for versatile applications. Equipped with digital speed display as standard. Drilling table adjustable via toothed rack and swivels around the column. Motor protection switch, star grip. Picture shows SB 25 S Technical data: Drilling capacity: 30 mm spindle: MK 3 drilling depth: 130 mm throat depth: 250 mm spindle speed, infinitely variable: 230 - 2700 rpm table size: 460 x 360 mm column diameter: 100 mm dimensions, approx. (WxDxH): 600 x 810 x 1780 mm motor power: 1,5 kW Mains connection: 400 V Weight, approx.: 230 kg Equipment: - Stepless speed adjustment with digital display - right / left rotation - T-slot stones - 24 V electrics Kdsdsp Duagspfx Abfjn - Height adjustable spindle protection device with micro limit switch - Base plate with T-slots - Drilling table adjustable via rack and worm gear and swivels around column - Reversing switch for R/L-run (option) Scope of delivery: - Machine light - emergency stop pushbutton - full motor protection - star grip - CE

Condition: new, MIOTAL® GB 50 VG geared pillar drilling machine with thread cutting device Technical data: Drilling capacity: 50 mm tool holder: MK 4 quill stroke: 200 mm tapping capacity: M33 face milling cutter: 100 mm end mill: 25 mm throat depth: 340 mm table size: 600 x 600 mm column diameter: 180 mm number of T-slots: 2 T-slot size: 22 x 35 mm motor power: 3 kW Weight, approx.: 750 kg Equipment: - Coolant device - Automatic spindle feed Kdjdpfx Aopxmliebfsn - Thread cutting device - LED machine light - Height adjustable protective cover - Table rotatable - Manual fine feed - Limit switch protected spindle

Condition: new, TC 180 x 1000 V Tip width: 1000 mm Center height: 178 mm Circumferential diameter over bed: Ø 356 mm Bed width: 190 mm Cross slide travel: 160 mm Travel distance top slide: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm Max. Chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2500 1/min Mechanical feed stages: 3 Kjdpjir Imyofx Abfsdn Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Face feeds X: (40) 0.022 - 0.98 mm/rev Metric thread: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 Gg/inch Thread module: (32) 0.4 - 7.0 Diametral thread: (32) 7.5 - 112 Quill diameter tailstock: Ø 40 mm Inner taper of quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 750 kg Dimensions, approx.: 1880 x 880 x 1390 mm Features: - Acceptance certificate according to DIN - Precise, hardened and ground guides - Robust headstock with circulating oil lubrication, precision bearing-mounted spindle, hardened and ground gears for long-lasting quality - Electromagnetic spindle brake (TC), frequency converter with electric braking device (V models) - Torsion-resistant machine beds made of MEEHANITE quality casting, stress-free annealed and multi-ribbed for extremely smooth running - Electrical equipment from SIEMENS/SCHNEIDER - Overload protection for feed gearbox - Pulse button for main spindle - CE / IEC as well as German documentation and German service Basic equipment (standard accessories): - Machine stand with splash guard rear panel - 3-jaw lathe chuck - 4-fold steel holder - Foot pedal with mech. brake device - Coolant device - Chuck guard and spindle cover in accordance with European safety standards CE - 1 Fixed center point for main spindle - 1 Fixed center point MK3 - 1 Test report - Safety devices and electrical equipment according to CE - Reducing sleeve for main spindle Operating tool Available options for this lathe: - 3-axis digital readout - Quick-change holder system Multifix also available as gearbox variants

Condition: new, Technical data: Fixed angular table: Fixed angular table clamping area: 800 x 400 mm Max table load: 200 kg Working spindle: Tool holder horizontally and vertically: ISO 40 Power of the main drive motor / 100% ED: 2.2 kW Vertical milling head: Speed range, tiered: (12) 50 - 2000 rpm Drill pinole, stroke: 100 mm Swivel range: +/- 90° Travel: X-axis automatic/man.: 385/400 mm Y-axis automatic/man.: 185/200 mm Ksdpfx Asd R S Ndjbfjdn Z-axis automatic/man.: 365/380 mm Feeds: Feed range: 0-650 mm/min Number of feeds: infinitely adjustable Rapid response: 1000 mm/min Characteristics: - Machine accuracy according to DIN 8615 - 3-axis digital displays FAGOR® Innova (option) - Spindle run max. 0.005 mm, incl. test protocol according to DIN 8615 (rolling bearing SKF®/NSK®) - Vertical milling head can be swivelled out for horizontal milling (without disassembly) - All relevant parts of the machine, e.g. machine stand, table, milling head, housing, etc. are made of voltage-free MEEHANITE® - quality casting (FC 30) and are often ribbed to give the machine maximum stability and working accuracy. All guideways are TURCITE®-B coated - All machined surfaces in the work area such as guides, table surfaces, T-slots, etc. are hardened and precision-ground. - The powerful drive transmits the power of the main motor via belts to the gearbox. - All axes have their own DC servo motors. These allow for a sensitive

Condition: new, Powerful hydraulic workshop press with movable cylinder (via handwheel), ideal for large and heavy workpieces. Picture shows WHP 160 Technical data: Kodsp Dt Uujpfx Abfjdn Capacity: 250 t Installation height: 900 mm Working area, max.: 1300 x 450 mm Piston stroke: 400 mm Forward speed: 8.58 mm/s Return speed: 13.03 mm/s Motor power: 15 kW Width: 2450 mm Depth: 1200 mm Height: 2650 mm Weight, approx.: 3100 kg Equipment: - Laterally movable cylinder via rack, pinion and handwheel - Generous working area - Height-adjustable table - Torsion-resistant design with welded steel - Pressure gauge - Fine pressure adjustment - Additional hand pump Your advantages: - One of the heaviest versions on the market - Available with tonnages of up to 500 tons - Maximum performance and stability - Different upright widths available on request - Horizontally freely positionable hydraulic cylinder, handwheel, rack and pinion (from 160 tons) Available with special equipment: - Fine pressure adjustment - SPS control - Working plate with T-slots for fixing irregularly shaped components - Lateral hydraulic cylinder adjustment

Condition: new, Cutting width: 355 mm Cutting height: 230 mm working height: 960 mm Table size: 500 x 400 mm Infinitely variable cutting speed: 20 - 90 m/min Saw band length: 2840 mm Saw band width: 3 - 16 mm Tiltable and inclinable table in 4 directions: 15°. Motor power: 0,75 kW Weight, approx.: 250 kg Scope of delivery: - Saw band - Infinitely variable cutting speed Kedpfxoilpz Ho Abfjdn - Band welding device with annealing unit - Machine light - shear - Grinding station - Chip brush - Blow out unit - LED digital display (to indicate cutting speed) - Table with stop groove - Rip fence - CE

Condition: new, Ideal for machining pipes, profiles, as well as solid materials made of stainless steel, iron, etc., suitable for commercial/industrial applications. Technical Data: Cutting capacity: Round 0°: 235 mm Kedpfx Abew Suxwjfodn Square 0°: 200 x 200 mm Flat 0°: 280 x 190 mm Round 45° right: 190 mm Square 45° right: 170 x 170 mm Flat 45° right: 190 x 180 mm Round 60°: 120 mm Square 60°: 120 x 120 mm Flat 60°: 120 x 115 mm Round 45° left: 175 mm Square 45° left: 145 x 145 mm Stepless cutting speed: 20 - 90 m/min Saw blade: 2645 x 27 x 0.9 mm Working height, approx.: 990 mm Coolant pump: 100 W Saw motor: 1.5 kW Connection: 230 V Dimensions (LxWxH), approx.: 1600 x 1100 x 1500 mm Weight, approx.: 295 kg Features: - Double miter bandsaw with swiveling saw bow from left -45° to right +60° - Generously dimensioned cast saw arm for low-vibration operation - Infinitely variable cutting speed for optimal adaptation to the workpiece - Hydraulic downfeed cylinder, steplessly adjustable - Quick-release vice for fast and easy workpiece clamping - Precision, adjustable saw blade guide for optimum cutting results - CE/IEC compliant, German documentation and service Scope of delivery: - Bi-metal saw blade - Blade tension adjustable via pressure gauge - Carbide blade guides - Quick-release vice - Material stop - Coolant system incl. pump - Hydraulic downfeed cylinder - Motor protection switch - Automatic shut-off after cutting - Machine base

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Kjdpfsy Urtfsx Abfedn Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, shaft length: 1,064 mm, input voltage: 230 V, type of input current: AC, laser power: 50 W, type of cooling: air, total width: 1,500 mm, total height: 2,050 mm, total length: 900 mm, working range: 600 mm, overall weight: 120 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, scan area length: 150 mm, scan area width: 150 mm, table length: 600 mm, table width: 600 mm, space requirement width: 1,550 mm, space requirement height: 2,100 mm, laser wavelength: 1,064 nm, working height: 950 mm, input frequency: 50 Hz, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) Kodpfxjy Urpyo Abfsdn - optional: digital height measuring system - optional: autofocus - EZCAD marking software in German / English (other software available on request) - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 1,550 mm, total height: 2,050 mm, total length: 900 mm, overall weight: 120 kg, door opening height: 400 mm, scan area length: 150 mm, scan area width: 150 mm, travel distance Z-axis: 300 mm, space requirement width: 1,550 mm, space requirement height: 2,050 mm, laser wavelength: 1,064 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, laser type: fiber laser, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 W, 20 W or 50 W - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system Kjdpfsxd Az Njx Abfjdn - optional: autofocus system - EZCAD marking software in German / English - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Year of construction: 2026, condition: new, functionality: fully functional, total length: 900 mm, total width: 1,550 mm, total height: 1,900 mm, input voltage: 230 V, laser power: 30 W, laser wavelength: 1,064 nm, type of cooling: air, type of input current: AC, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm Kdodeunh H Sopfx Abfjn - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: autofocus system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: like new (used), functionality: fully functional, Year of construction: 2024, overall weight: 160 kg, total length: 1,300 mm, total width: 800 mm, total height: 1,930 mm, input voltage: 230 V, input frequency: 50 Hz, laser wavelength: 10,600 nm, type of input current: AC, laser type: CO₂ laser, Equipment: lighting, With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers once they have been set. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer it to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. The LAS 28 laser model can optionally be equipped with a rotary axis (3-jaw chuck) for labelling cylindrical parts. Other options, such as lateral cantilevers for labelling long parts, can also be realised. 30W CO2 laser (optional: 60 W) - Wavelength 10640nm - marking field size 220x220 mm - optional: rotary axis (3-jaw chuck) - optional: exhaust system (incl. activated carbon filter) - optional: extension arm for large workpieces (also on both sides) - marking software EZCAD in German / English - Pilot laser (simple preview) - focus finder (easy focus adjustment) - max. part height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with operating system Windows - frame made of aluminum profile Kdjdpfx Aowkpyhebfsn - air cooled - door width approx. 720mm / door height: 400mm - Connection 230V - Dimensions: approx. 1000 x 800 x 2000 mm (LxWxH) - Weight: approx. 140 Kg

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 45 kg, total length: 600 mm, total width: 400 mm, total height: 690 mm, input voltage: 230 V, input frequency: 50 Hz, laser power: 20 W, laser wavelength: 1,064 nm, scan area length: 110 mm, scan area width: 110 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks and without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. The standard equipment includes a laptop with Windows operating system and laser software. Optionally, the laser model LAS 22 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 Watt (Optional: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures Kedpfx Absy Emthefjdn - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with pinch protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 100 kg, total length: 800 mm, total width: 600 mm, total height: 1,660 mm, input voltage: 230 V, input frequency: 50 Hz, laser power: 20 W, laser wavelength: 1,064 nm, type of cooling: air, laser type: fiber laser, The universal laser marking system LAS 28 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. Optionally, the laser model LAS 28 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, can be realized. Made in Germany - Fiber laser 20W (Optional: 30W, 50W) - Wavelength 1064nm - marking field size 150x150mm (optional: 200x200) - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: Autofocus system - signal light for indication of operating status - marking software EZCAD (optional additional laser software) - Pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. part height approx. 270mm - electrically adjustable Z-axis (adjustment of working plane) Kdsdjv Sybyepfx Abfen - frame made of aluminum profile - connection 230V - air cooled - Laptop with Windows operating system - dimensions: 800x 600 x 1660mm (LxWxH) - weight: approx. 80 Kg

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, TECHNICAL DATA Accuracy: from 3.0 + L/250 µm Measuring range X-axis: 3,500 mm Measuring range Y-axis: 6,000 mm Measuring range Z-axis: 2,000 mm Type of input current: Three-phase Kdodpfxsyr Simj Abfjn Equipment: Lighting, documentation/manual, nameplate available Details of the offer Description Portal measuring machine Manufacturer: Mora Type: U204-20-35-60 Measuring software: Manufacturer Gemodek, Type MS10 Control panel on wheels Measuring and evaluation unit 2 PCs, Manufacturer HP, Type XW4300/Z220 2 monitors, 19/24", Roller shutter cabinet, telescopic drawer cabinet, Manufacturer Lista, W 1,000 mm, 7 drawers. Contents: Infrared measuring probe, Manufacturer Renishaw, Type PH10M, Calibration mandrel, accessories

Condition: reconditioned (used), Year of construction: 2021, operating hours: 980 h, functionality: fully functional, total width: 2,500 mm, overall weight: 19,000 kg, power: 280.23 kW (381.01 HP), year of last overhaul: 2025, VZ 850 DK, Volvo Penta TAD16, 770 hp, 3300 operating hours - Conveyor belt in new condition, rollers renewed - Shredding shafts 7/7-5, made of metal - Crushing bar with comb - Counter comb in new condition - Two hoppers - Long discharge conveyor - CAT engine C9.3 - Emissions standard EPA Tier 4 final Kdsdpfxsw S Iiij Abfsn - Only 980 operating hours

Condition: used, 5tSWF Krantechnik GmbH Kedodc A R Topfx Abfedn