Used Arbeitskorb Für Snorkellift Sb 47 Oder Tb 50 for sale (38,383)

Condition: new, machine/vehicle number: 56c59c8aba35227ffb44c9f75, empty load weight: 11,350 kg, maximum load weight: 26,650 kg, overall weight: 38,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis Jumbo semi-trailer Welded steel construction with narrow cross member spacing and reinforced design, low loader external frame profile, for transporting construction machinery up to 32000 kg and up to a max. external width of the construction machinery of 2550 mm, fifth wheel plate with replaceable 2 king pins. Rear inclination to approx. 1200 mm and 7°. Ramp shaft closed at the top with steel/checker plate, In the low bed Omega rail on the side at the bottom of the outer frame as a suspension strip for tarpaulin and spacer for the lashing points, not in the wheel area. With lift table on an additional fixed lightweight outer frame with omega profile, lift table can then be raised with closed tarpaulin! 24 t. 2-speed support winch, single-side operation, with semicircular lower section and straight connecting plate, with thrust compensation, free swing radius to the rear approx. 1950 mm, Folding rear support 2 wheel chocks with holder Aluminum side bumpers Quarter-shell mudguards in front of and behind each axle With anti-spray flaps behind each axle Steel underride guard Rear spray flaps across the entire width 4 stainless steel storage box, w=800/h=350/t=350 mm, with polished door, lockable 2 x in FR-left and 2 x in FR-right in front of the 1st axle Lifting table to gooseneck, approx. 3000 mm long, can be raised hydraulically for transfer to gooseneck, with mechanical locking when raised. (inclined cylinder for good ground clearance, Fliegl standard). Operation in FR-right + additional operation with radio remote control (same as ramp operation) Lifting table can be raised with closed tarpaulin! Tarpaulin suspension in the lift table area on an additional fixed lightweight outer frame with Omega profile, lift table can be raised with closed tarpaulin! Lashing mushrooms can also be used when lowered! Dedpfxsi Riw As Ah Njuu Lashing eyes Gooseneck: 4 pairs of 5 to lashing eyes embedded in the outer frame 2 pairs of lashing points at the top and sides of the outer frameLow bed 8 pairs of lashing mushrooms at the top and sides of the outer frame, each 10 tons 9 pairs of 5to embedded in the outer frame Axles+suspension SAF drum brake axles last axle self-steering, with automatic reversing lock via reversing light, and additional locking function on the vehicle via hand button. Air suspension with lift & lower valve + auto-reset function H & S function with quick air release 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Axle lift below the recomm. Driving height, therefore no warranty for tire damage Wheels and tires 235 / 75 R 17,5 from leading manufacturers Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 interchangeable clutch heads at the front, without connecting cable EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Axle load detection in the truck via EBS, without truck instal. (no calibrated scales) Electrical system 24 volt, multi-chamber lights, amber LED lighting on the side 2 white position lights at the front, in LED 2 white/red lane departure lights at the rear, 1 rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illum

Condition: new, machine/vehicle number: 087c7b6bc0c6118a84279fb46, empty load weight: 4,100 kg, Further information Frame Welded steel construction made of fine-grained steel, hot-dip galvanized, flat plateau without raised edges, Loading area slanted downwards by approx. 8° after the rear axle. Side members made of steel profiles, Hot-dip galvanized steel frame, with stainless steel plate at the kink as cable guide - flush with the floor. For trucks with Wheelbase: 2nd axle 5,100 mm / 2nd to 3rd axle 1350 mm Trailer coupling Towing hitch ball head D24.8: (height from floor to top edge approx. 480 mm), towing capacity 2,800 kg, incl. assembly and electrics with 7-pin socket Accessories/conversions 2 holders for wheel chocks, aluminum side bumpers, foldable - are taken from the truck! Steel underride guard, quarter-shell mudguards with mud flaps - will be taken from the truck! Duodsi Riytopfx Ah Nsu Storage box Plastic tool box, with drawer and shelf, w=650 Incl. / h=520 / d=670 mm, lockable with a padlock (lock not included). not included) 1 holder for 3 pcs. petrol cans 1 stainless steel storage box, w=600/h=400/t=500 mm, with polished door, incl. lockable, includes control valve. lockable, includes control valve and electro-hydraulic pump unit. pump unit. Control box with circumferential door seal and sealing sleeves on the back (splash-proof according to techn. technical possibility) Electrics Adaptation of the existing rear lights, 2 additional LED work lights, recessed in the bulkhead recessed switched via parking light with switch on front wall outside in FR-left, 1 LED work light, at the rear, with integrated reversing camera Incl. with color flat screen monitor, screen with suction cup mount and power supply via 24 volts, Voltage divider 24/12V, 1 socket 7-pin 12V = plug-in adapter Base Mega Grip made of toothed galvanized grating, steel grating 50/4 Incl. with mesh width 50 mm. Top side with anti-slip serration, laid continuously over the entire main frame plateau Lashing eyes 12 pairs of lashing rings suspended freely pivoting in the outer frame - 10 tons each. 1 x at the front and the last one at the rear. 1 piece Lashing eyelet at the very rear in the center for fastening the winch cable 12 lashing eyes centrally embedded in the floor, 5 tons each, (not included in Incl. rear sloping) Front wall Sheet steel bulkhead, height 1,500 mm. Fixed with corner pillars at front wall height. In each case 2 x 12 pcs. Suspension brackets for lashing chains mounted on the left and right of the front wall Cable winch Electric cable winch, 24 volt, pulling force approx. 6350 kg, mounted in the center of the bulkhead (recessed with loading bridge), operation with radio remote control, cable length min. 35 m x 9.5 mm, with roller rope window, with cable pressure plate, incl. overload protection, cable freewheel clutch, manual switch with approx. 5 m control lever, acceptance of the cable winch, civil engineer test report, test book, operating instructions Drive-on ramps Length 3,500 mm - 2-part (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg / pair (also for ramp loading), electric for ramp loading), electro-hydraulically foldable and laterally movable - incl. Electro-hydraulic pump unit. Drive-on angle approx. 8° with lowered rear axle Ramp support made of hot-dip galvanized steel grating (like the floor of the loading bridge), with with anti-skid toothing. Ramps can be pushed together to approx. 170 mm, Hydraulic ramp extension. Ramp prepared for operation on loading ramp with full load capacity. Ramp locking with 2 tension belts. Ramp tip offs

Condition: new, machine/vehicle number: c78894767223a51dd199030f3, empty load weight: 4,600 kg, Further information Frame Welded steel construction made of fine-grained steel, hot-dip galvanized, flat plateau without raised edges, Loading area slanted downwards by approx. 8° after the rear axle. Side members made of steel profiles, Hot-dip galvanized steel frame, with stainless steel plate at the kink as cable guide - flush with the floor. For trucks with Wheelbase: 2nd axle 1,795 mm / 2nd to 3rd axle 4105 mm and 3rd to 4th axle 1350 mm Trailer coupling Towing hitch ball head D24.8: (height from floor to top edge approx. 480 mm), towing capacity 2,800 kg, incl. assembly and electrics with 7-pin socket Accessories/conversions 2 holders for wheel chocks, aluminum side bumpers, foldable - are taken from the truck! Dujdpjk Unitofx Ah Nou Steel underride guard, quarter-shell mudguards with mud flaps - will be taken from the truck! Storage box Plastic tool box, with drawer and shelf, w=650 Incl. / h=520 / d=670 mm, lockable with a padlock (lock not included). not included) 1 holder for 3 pcs. petrol cans 1 stainless steel storage box, w=600/h=400/t=500 mm, with polished door, incl. lockable, includes control valve. lockable, includes control valve and electro-hydraulic pump unit. pump unit. Control box with circumferential door seal and sealing sleeves on the back (splash-proof according to techn. technical possibility) Electrics Adaptation of the existing rear lights, 2 additional LED work lights, recessed in the bulkhead recessed switched via parking light with switch on front wall outside in FR-left, 1 LED work light, at the rear, with integrated reversing camera Incl. with color flat screen monitor, screen with suction cup mount and power supply via 24 volts, Voltage divider 24/12V, 1 socket 7-pin 12V = plug-in adapter Base Mega Grip made of toothed galvanized grating, steel grating 50/4 Incl. with mesh width 50 mm. Top side with anti-slip serration, laid continuously over the entire main frame plateau Lashing eyes 12 pairs of lashing rings suspended freely pivoting in the outer frame - 10 tons each. 1 x at the front and the last one at the rear. 1 piece Lashing eyelet at the very rear in the middle for fastening the winch cable 12 lashing eyes centrally embedded in the floor, each 5 to. (not included in Inkl. rear slope) Front wall Sheet steel bulkhead, height 1,500 mm. Fixed with corner pillars at front wall height. Each with 2 x 12 pcs. Suspension brackets for lashing chains mounted on the left and right of the front wall Cable winch Electric cable winch, 24 volt, pulling force approx. 6350 kg, mounted in the center of the bulkhead (recessed with loading bridge), operation with radio remote control, cable length min. 35 m x 9.5 mm, with roller rope window, with cable pressure plate, incl. overload protection, cable freewheel clutch, manual switch with approx. 5 m control lever, acceptance of the cable winch, civil engineer test report, test book, operating instructions Drive-on ramps Length 3,500 mm - 2-part (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg / pair (also for ramp loading), electric for ramp loading), electro-hydraulically foldable and laterally movable - incl. Electro-hydraulic pump unit. Drive-on angle approx. 8° with lowered rear axle Ramp support made of hot-dip galvanized steel grating (like the floor of the loading bridge), with with anti-skid toothing. Ramps can be pushed together to approx. 170 mm, Hydraulic ramp extension. Ramp prepared for operation on loading ramp with full load capacity. Ramp locking with 2 tension

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1090, The TB6/SB MOD 140, manufactured by Giani F.lli L. & G. s.n.c. (Italy), is an industrial slitter machine designed for longitudinal cutting of film, paper and packaging materials. The machine features a robust construction and reliable cutting performance, making it suitable for continuous industrial operation. Dujdpfxjyghn Is Ah Nou It is commonly used in converting, packaging and film processing industries where precise cutting and stable material handling are required. ⚙️ TECHNICAL PARAMETERS • Manufacturer: Giani F.lli L. & G. s.n.c. (Italy) • Machine type: Slitter / longitudinal cutting machine • Model: TB6/SB MOD 140 • Serial number: 1090 • Year of manufacture: 2007 • Certification: CE compliant • Application: film, paper and packaging materials

Year of construction: 2005, condition: good (used), Dust extractor,welding fume extractor by HERDING. Self-cleaning,pneumatic filter for plasma,laser,sandblasting,sodding,grinding plaster,cement,plastic and all kinds of dry dust. The filter is cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Duodpfxopgnfde Ah Nju Highly efficient Jet-Pulse cleaning system with low compressed air consumption. Integrated control cabinet with microprocessor to control all components. Herding MULTICOATER - (for sticky dust) for automatic addition of filter additives to protect filter media. 4 Kw fan Capacity - 800 m3/h Herding® DELTA or DELTA² filter elements Filtration area - 14.56 m2

Condition: used, Year of construction: 2006, operating hours: 33,000 h, machine/vehicle number: SO135, Used Nissei blow molding machine ASB 50MB 2006Technical Specifications & Performance DataThis one-stage biaxial orientation stretch blow molding machine delivers consistent PET bottle production with reliable throughput and compact footprint. Manufactured by ASB INTERNATIONAL PVT. LTD. (Nissei ASB engineering), the ASB-50 MB combines injection, conditioning, and blow molding in a single machine, reducing handling and improving quality control for a second hand or used bottling line seeking dependable PET bottle supply.Manufacturer: ASB INTERNATIONAL PVT. LTD. (Nissei ASB)Model: ASB-50 MBMachine type: One-stage biaxial orientation stretch blow molding machineYear: 2006Production speed: ~1,000 bottles/hour with 4-cavity moldCavities: Configurable 1–6; supplied in 4-cavity configurationFormats: 40 ml to 750 ml (typical PET bottle sizes within this range)Containers: PET bottlesElectrical supply: 400 VAC, 50 HzInstalled power (observed): approx. 20.1 kWMotor circuits: 380 VAC — 13.5 kW; 200 VAC — 0.5 kWHeater circuits: 400 VAC — 6.1 kWAdvanced Automation & Control SystemsThe ASB-50 MB architecture enables precise control of heating and stretch-blow parameters for stable bottle quality across different formats. Typical one-stage controls coordinate injection, conditioning, and blowing stations for repeatable results, with safety interlocks and guarding to protect operators. Quick-change mold capability supports efficient format changes, minimizing downtime during product transitions common in industrial packaging and beverage production environments.Production Line Integration CapabilitiesDesigned for PET bottle manufacturing upstream of filling, capping, and labeling systems, this machine integrates effectively with conveyors, accumulation tables, and downstream bottling equipment. Its one-stage process eliminates the need for separate preform handling equipment (such as preform unscramblers, tippers, and elevators), simplifying line layouts in a used bottling line. Bottle format flexibility from 40 ml to 750 ml supports water, juice, CSD, and other beverage applications when equipped with appropriate molds.Machine Condition & Maintenance HistoryThis second hand machine is presented in ready-for-operation condition, suitable for immediate integration into an existing beverage production or industrial packaging setup. As with any pre-owned blow molding machine, commissioning checks and routine maintenance are recommended to align the installation with site utilities and product specifications.Operational Performance & VersatilityThe ASB-50 MB delivers stable output around 1,000 bph in a 4-cavity configuration, with potential to reconfigure up to 6 cavities depending on molds and process settings. Its one-stage design promotes excellent neck dimensional control and clarity, supporting a wide range of bottle shapes within the 40–750 ml range. When paired with suitable molds and process recipes, it can produce PET containers for ... Dedpoyhbfisfx Ah Nsuu

Condition: excellent (used), Indoor precision meter Make Subito Duedjlwqctopfx Ah Nsu measuring range : 50 - 100 mm measuring depth ca.280 mm with dial gauge

Condition: new, *IMMEDIATELY AVAILABLE* Take advantage now! We are clearing out for our relocation to a new site! There are unique items from our showroom at unbeatable prices! Including electric hydraulics / emergency hand pump / parabolic suspension / full steel floor / charger Technical Data: • Type: New vehicle • TÜV: New/2 years • Availability: IMMEDIATE! • Permissible total weight: 3,500 kg • Unladen weight: approx. 1,020 kg • Payload: approx. 2,480 kg • Internal dimensions: 361 x 185 x 35 cm (L x W x H) • Overall dimensions: 514 x 200 x 118 cm (L x W x H) • Loading edge height: approx. 72 cm • Tires: 195/50R13C steel rim • Brakes: Yes • Jockey wheel: Yes, automatic • 100 km/h approval: Optional! • Including vehicle documents Vehicle structure: • Floor: Full steel floor, massively reinforced Dsdjyyw I Sspfx Ah Nsuu • Sidewalls: Double-walled anodized aluminum, foldable and removable on all 4 sides • Sidewall height: 35 cm • Chassis: Flatbed, KNOTT parabolic spring axle • Tipping function: Three-way tipping • Hydraulics: Electric & emergency manual tipping • Tipping angle: approx. 45° / 47° • Hydraulic cylinder stages: 4 stages • Brake coupling & brake system: KNOTT • Frame/chassis: Welded, fully hot-dip galvanized steel frame • Extensions: At extra charge • Lashing eyes: 8 in the floor • Support legs: At extra charge • Ramps: At extra charge • Lighting connector: 13-pin • Approval: COC documents Standard equipment: • Double-walled anodized aluminum sidewalls • Side and rear sidewalls foldable • Detachable sidewalls • Rear panel also swing-mounted • Solid full steel floor – extremely robust • Very sturdy welded steel frame • Full immersion hot-dip galvanized frame • Multiple cross beams for high point load capacity • Additional longitudinal beams continuously welded in • Electric hydraulics for tipping, with battery and cover • Built-in battery • Integrated battery charger and charge indicator • Emergency hand pump installed • Reverse automatic system • Parabolic spring axles (leaf suspension) • KNOTT brake coupling and parking brake • Channel pre-installed for loading ramps • Sturdy over-center latches • Very robust bolted V-drawbar REINFORCED • 13-pin plug • Reverse lights • Large-format safety lighting • Integrated rear fog light • Recessed lighting in rear frame • Automatic central jockey wheel • Vehicle registration documents: COC papers Optional accessories – Please inquire: • 100 km/h approval • Mesh sides 60 cm • Closed steel sides 60 cm • Spare wheel • Toolbox • Rear support legs • Loading ramps • Flat tarpaulin • Net hooks • Additional lashing eyes • Reverse lights • Lashing straps • and much more... Brand new vehicle with warranty and TÜV. ————— - Financing or leasing available - Nationwide delivery available - All prices include VAT - Vehicle registration documents can be sent in advance, or short-term plates (Germany) can be provided - Export plates including customs clearance available Descriptions and images are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available from us! We have been your authorized dealer and repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many other brands for over 30 years - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Including steel side walls / electric hydraulics / emergency hand pump / parabolic suspension / full steel floor / battery charger Technical Data: • Type: New vehicle • MOT: New/2 years • Availability: IMMEDIATE! • Permissible total weight: 3,500 kg • Empty weight: approx. 1,100 kg • Payload: approx. 2,400 kg • Internal dimensions: 361 x 185 x 35 cm (L x W x H) • Total external dimensions: 514 x 200 x 118 cm (L x W x H) • Loading edge height: approx. 73 cm • Tyres: 185/70R13C steel rims • Brakes: yes • Jockey wheel: yes, automatic • 100 km/h approval: optional • Including registration documents Body Construction: • Floor: Full steel floor, heavily reinforced • Side panels: Full steel side walls, hot-dip galvanized, removable • Side wall height: 35 cm • Chassis: Platform trailer, KNOTT parabolic axle • Tipping function: Yes, 3-way tipper • Hydraulics: Electric and manual tipping • Tipping angle: approx. 45°/47° • Hydraulic cylinder stages: 4-stage • Overrun device & brake: KNOTT • Frame/chassis: welded, hot-dip galvanized steel frame • Extensions: at extra cost • Lashing eyes: 8 in the floor Duodpsyyw Npefx Ah Nou • Supports: at extra cost • Ramps: at extra cost • Lighting plug: 13-pin • Registration: ZBII & COC documents Standard Equipment: • Full steel side walls, hot-dip galvanized and reinforced • Side and rear panels foldable • Removable side walls • Rear flap also pendulum mounted • Full steel floor – extremely robust • Very sturdy welded steel frame • Frame fully hot-dip galvanized by immersion • Multiple sturdy cross beams for high point loads • Continuous welded longitudinal beams for additional reinforcement • Electric hydraulics for tipping, with built-in battery and cover • Integrated battery charger and charge indicator • Emergency hand pump mounted • Automatic reversing • Parabolic spring axles (leaf spring suspension) • KNOTT overrun device and parking brake • Ramp channel pre-fitted • Sturdy lever locks • Very strong, bolted V-drawbar, reinforced • 13-pin connector • Reversing lights • Large-dimension safety lighting • Integrated rear fog lamp • Tail lights recessed into rear frame • Central automatic jockey wheel • Registration papers: COC documents Optional Accessories – Enquire for details: • 100 km/h approval • Mesh side extension 60 cm • Closed sheet metal side extension 60 cm • Spare wheel • Toolbox • Rear supports • Ramps • Flat cover • Net hooks • Additional lashing eyes • Reversing lights • Lashing straps • and more New vehicle with warranty and MOT. ————— - Financing or leasing available - Nationwide delivery possible - All prices incl. VAT - Vehicle registration documents can be sent in advance or export plates (Germany) can be provided - Export plates incl. customs clearance possible Descriptions and images are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available! For over 30 years, we have been an official dealer and repair workshop for industrial brands such as Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many more. - Subject to errors, omissions, and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Grab it now!! We are clearing out our inventory ahead of our move to a new location! There are unique pieces from our showroom at unbeatable low prices. incl. electric hydraulics / emergency hand pump / parabolic suspension / full steel floor / battery charger Technical data: • Type: New vehicle • MOT (TÜV): New/2 years • Availability: IMMEDIATE • Permissible total weight: 3,500 kg • Unladen weight: approx. 900 kg • Payload: approx. 2,600 kg • Internal dimensions: 320 x 168 x 35 cm (L x W x H) • Overall dimensions: 475 x 186 x 120 cm (L x W x H) • Loading edge height: approx. 72 cm • Tyres: 195/50R13C steel rim • Brakes: yes • Jockey wheel: yes, automatic • 100km/h approval: optional! • incl. vehicle documentation Duodpeyyw I Ejfx Ah Neu Body structure: • Floor: solid full steel, heavily reinforced • Side panels: double-walled anodised aluminium, 4x foldable & removable • Side panel height: 35 cm • Chassis: flatbed, KNOTT parabolic suspension axle • Tipping function: Yes, three-way • Hydraulics: electric & emergency hand tipping • Tipping angle: approx. 45° / 47° • Hydraulic cylinder stages: 4-stage • Overrun device & brake: KNOTT • Frame/chassis: welded steel frame, hot-dip galvanised • Side extensions: available at extra cost • Lashing eyes: 6 on the floor • Supports: available at extra cost • Ramps: available at extra cost • Lighting plug: 13-pin • Approval: COC documents Standard equipment: • Double-walled anodised aluminium side panels • Side and rear panels foldable • Removable side panels • Rear flap can also swing • Full steel floor – extremely robust • Very sturdy welded steel frame • Frame fully hot-dip galvanised • Many stable cross-members for high point load capacity • Continuous additional longitudinal reinforcements welded in • Electric hydraulic tipping with battery and cover included • Built-in battery • Integrated charger + charge indicator • Emergency hand pump fitted • Automatic reversing system • Parabolic spring axles (leaf suspension) • KNOTT overrun device and handbrake • Ramp shaft pre-installed • Sturdy lever locks • Extra strong V-drawbar bolted and reinforced • 13-pin plug • Reversing light • Large, high-visibility safety lighting • Integrated fog tail lamp • Rear lighting recessed in frame • Central, automatic jockey wheel • Documentation: ZBII & COC papers Options available – please enquire: • 100km/h approval • 60 cm mesh cage extension • 60 cm closed sheet extension • Spare wheel • Toolbox • Rear supports • Ramps • Flat tarpaulin • Net hooks • Additional lashing eyes • Reversing lights • Lashing straps • and more Brand-new vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery possible - Vehicle registration papers can be sent in advance or red number transfer plates (Germany) can be provided - Export plates including customs declaration available Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available from us! We have been your specialist dealer and workshop for repairs for over 30 years for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many other brands. - Subject to errors, omissions, and prior sale -

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 4,769 h, load capacity: 5,000 kg, lifting height: 5,080 mm, free lift: 1,600 mm, fuel type: electric, mast type: triplex, construction height: 2,500 mm, fork length: 1,800 mm, drive type: Elektro, Electric 4-wheel forklift ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: triplex Transmission: automatic Condition: refurbished, without warranty Technical condition: very good Front tires type: non-marking Front tires condition: 80 - 100% Rear tires type: non-marking Rear tires condition: 20 - 40% Battery voltage: 80V Battery capacity: 930Ah Battery year: 2020 Description: Price includes new UVV (safety inspection). 4x superelastic front tires very good / rear will be renewed. The 2020 battery will be regenerated with a power cycler including Kappa test. Suitable charger with plug included. We are happy to organize cost-effective transport for you. Leasing with option to buy possible! Sideshift, fork positioner, Dodpfxsyt Tiws Ah Neuu 3rd valve, 4th valve, rear work lights, front work lights, heater, full cabin, full free lift, CE certificate, Mini lever, overhead guard roof,

Condition: ready for operation (used), Year of construction: 2004, An Illig slide blister machine is available. Blister length range: 110mm-500mm, blister width range: 50mm-280mm, max. blister depth: 80mm, fold-over edge. An on-site inspection is possible. Dsdpfx Aeyyplcoh Nsuu

Condition: used, In this offer you are purchasing a used "Plockmatic RCT II" brush trimmer Object of sale: 1 x Plockmatic Trimmer RCT 2.0 Duedpfxjqyb U Ss Ah Nou Rotation, creasing and 2-sided trimming For various Xerox models Counter readings: Total: Approx. 987 booklets Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Year of construction: 2026, condition: new, The PD 50 e length stop with servo motor drive has a modern control positioning device that ensures that the carriage holds the material in the desired position even under load. The control provides information in three display fields about the actual value, the target value and the number of pieces to be processed (option). Motorized retraction of the carriage is possible. Existing machines / roller conveyors can be retrofitted at any time. Product Details: • Positioning control for automatic positioning • Possibility of positioning according to absolute or incremental dimensions • easy-to-read LED display for nominal size, actual size and quantity (option) • Carriage with DC servo motor and encoder • Carriage with multiple ball bearings • Control positioning device Dsdpfx Aofv T Dweh Nouu • Positioning accuracy 0.1 mm/m • Motorized clearance function • Steel guide rail with precision rack • Multi-adjustable stop arm • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.5 m • Left or right hand versions available • Accesories: -Stop arm with spring damping -Arm retraction with impact damping via pneumatic cylinder -Piece counter for number of pieces/cuts made -programmable NC control with 3000 memory locations -Different material roller conveyors (e.g. roller conveyor width 290 mm or 407 mm etc.) It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: good (used), Year of construction: 2018, overall weight: 1,000 kg, volume flow: 2,000 m³/h, Herding Extraction System COMP 1500-8/9 SB Manufacturer: Herding GmbH Filter Technology Model: Herding COMP 1500-8/9 SB Year of manufacture: 2018 Dedpfxsyrndtj Ah Nsuu Type: Industrial Extraction / Filtration System Airflow rate: 2000 m³/h Weight: 1000 kg Control unit: Herding MP 12 Filter cleaning: Pneumatic pulse cleaning Machine ID: 28694 Machine ID: 28695 CE marking: present Quantity: 2

Condition: excellent (used), Year of construction: 2008, operating hours: 39,000 h, functionality: fully functional, drilling depth: 1,800 mm, drill diameter: 30 mm, Manufacturer: SFT Model: TBM 3-1500 Machine type: Deep hole drilling machine with BTA system Drilling diameter: 15 – 30 mm Drilling depth: 1800 mm Chip conveyor: included Control: SFT / PS 100 incl. control cabinet Frequency inverter: included Dujdsynui Iopfx Ah Nju Oil sump: included Coolant tank: 2,500 liters oil Coolant pumps: 3 units, each adjustable to 40 liters, 100 bar Signal beacon: included Tailstock: rotating and adjustable according to drilling length Clamping: hydraulic clamping operation Drill spindle: speed regulation available Paintwork: light grey / blue Loading station: automatic door Machine footprint: 7,000 x 1,200 mm Filter footprint: 3,000 x 800 x 1,250 mm Commissioned: late 2007 Recurring maintenance according to manufacturer’s specifications Available: end of March 2026 Operation: 2/3-shift operation

Condition: new, neu ca. 12 - 14 Wochen ab Auf Italien 32900 € 628.39 € 50 mm 4000 mm 950 mm 1250 mm 430 kg 6 cm³ 50 x 3,31 mm Ø 1”1/4 mm Ø 50 x 2,5 mm 40 x 40 x 4 mm 25 x 50 x 6 mm 50 x 25 x 2,7 mm 60 mm 200 mm 20 mm 210 ° 1,25 / 2,5 3.5 kW 15 l With mandrel 3 m length Can be used with or withoud mandrel Two bending speeds Programmable bend sequencing and mandrel retraction Independent clamp and pressure die adjustment Micrometer wiper die adjustment Auxiliary system for stabilizing the hydraulic slide pressure Quick tool change system With pneumatic material clamping and DRO system for linear and rotational positioning ALTERNATIVELY: model with mandrel 6 m length price on request Duodpfeynmrnex Ah Neu

Condition: used, Ball screw with SIEMENS servomotor Linear guide with permanent SIEMENS servomotor Type: 1FK6044-7AH71-1EG0 Type: 1FK7044-7AH71-1EG0 ID No. YF RN22 5076 01 001 Year of manufacture: 2003 Duedpfx Ajgi E Hdeh Nsu Axis travel: 540 mm Total length: 900 mm Shaft diameter: 40 mm Lead: 40 mm Ball diameter: approx. 6 mm - Compact unit with servomotor and ball nut - Ball screw guided to prevent rotation, driven via nut - Ball screw Ø 40 mm (hollow shaft, inner diameter = approx. 22 mm) - Permanent-magnet SIEMENS servomotor Type: 1FK6044-7AH71-1EG0 (Serial No: ID No. YF RN22 5076 01 001) Total dimensions L x W x H: 900 x 200 x 330 mm Weight: 30 kg Good condition Removed from a fully functional special-purpose machine, tested before removal. 8 units available The stated price refers to 1 unit.

Condition: used, empty load weight: 9,820 kg, maximum load weight: 35,180 kg, overall weight: 45,000 kg, first registration: 04/2014, next inspection (TÜV): 06/2024, loading space length: 9,500 mm, loading space width: 1,530 mm, suspension: other, tire size: 385/65 R 22,5, color: other, gearing type: other, front tire size: 385/65 R 22,5, driver cabin: other, emission class: none, Concrete internal loader, concrete internal loader, internal loader for concrete parts, Wheelbase (mm): 6640 to the end of the vehicle Duedpfsvv T S Tex Ah Neu * Support device * BPW half axles * Spare wheel * Drop support * Hydraulic suspension * Hydraulic axle compensation * Hydraulic inner swing arm * Platform length 2,950 mm * Pump unit * Drum brake * 6-way manual tensioning * Fully lowerable * Central lubrication system We expressly reserve the right to sell the vehicle prior to sale, as we also offer this item on other portals. Information on accessories is provided without guarantee, subject to changes, prior sale or errors. We offer and strongly recommend an inspection and test so that the buyer does not have any false ideas about the condition and suitability. Inspections and tests are possible at any time by appointment and are expressly desired. We take care of all formalities and hand over the vehicle with the desired transfer license plates for an additional charge. Pictures have been partially edited and are for initial viewing only. If you are interested, please contact us and request current pictures.

Condition: new, power: 184 kW (250.17 HP), fuel type: diesel, overall weight: 11,990 kg, color: grey, gearing type: automatic, loading space length: 6,000 mm, loading space width: 2,550 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, IMMEDIATELY AVAILABLE CERTIFIED ACCORDING TO VDI 2700, 8:1, 8:2 * Photos do not show the original vehicle. The actual trailer is equipped with a twin axle. Current photos to follow. Vehicle transporter MAN TGL 12.250 4x2 BL: * Rear axle with air suspension * PTO (power take-off) * Cab with 2 individual seats * Sleeping compartment * Auxiliary heater * Radio * EU tachograph 4.1 * GSR 2 equipment Car transporter body DS12 [MODULO]: * Double-deck body for transporting 2 passenger cars or 1 small van/mobile home * Lower deck loading area approx. 600 x 255 cm * Lifting deck approx. 400 x 240 cm * Winch with remote control (wireless and wired) * Body hot-dip galvanized Trailer: * BLYSS air-braked trailer for 3 passenger cars * Twin axle with twin tyres, GVWR 18,000 kg * Payload approx. 13,500 kg * Loading area approx. 900 x 255 cm * Rear section extendable by approx. 150 cm * Lifting deck approx. 450 x 240 cm * BPW axle * ABS * Trailer with perforated driving plates * Vehicles securable in any position according to DIN * Trailer hot-dip galvanized Optional Tandem axle with twin tyres, GVWR up to 18,000 kg * Payload up to approx. 13,500 kg Dodpfefq Nckjx Ah Neuu Load securing equipment also available from us: * Lashing and tension straps * Load bars * Safety vests * Transport boxes * Edge protection * Dunnage bags * Wheel chocks * etc. Financing and leasing available We manufacture bodies of any size and type for any chassis. Tarpaulin, GRP sandwich, aluminium. Visit us at: Bodies – Complete vehicles – Trailers – Consulting – Financing Subject to errors and prior sale. No liability for misprints or input errors.

Year of construction: 2010, condition: good (used), weight 3000 kg Dusdpfx Ahjhhiawo Nju

Condition: new, Year of construction: 2026, ZGR-3640/0.8 Warrenty: 12 months Certificate CE Eccentric pressure that is transferred to both sides of the machine Working length: 3640mm to the plate thickness of 0,8 mm STEEL SHEET 0,8 mm TITAN-ZINC-PLATE 0,8 mm, ALUMINIUM SHEET 1,2 mm , COPPER PLATE 0.8 mm, NIRO-SHEET 0,5 mm , Bending beam: 24 mm Bending angle: 145 degrees Cutting in the whole working length, Lift the upper beam in three layers, Dsdpfscka N Uox Ah Njuu maximum width between the beams 80 mm rear frame for holding sheet, weight: 650 Kg Shears - with regulation of scissors guide and the rolls, which are made of high-alloy steel of very high resistance to wear. This allows cutting of sheet metal over a very long period without sharping the rotary shear. The performance of the rotary shear is about 40km sheet with a thickness of 0.5 mm - up to the first sharpening. The shears can be sharpened on average 35 times. The rotary shear weighs about 6.5 Kg. The price of this item does not include VAT. For invoice, we need the active VAT No. We provide VAT invoices from the tax rate of 0%. If you wish to order private, you should contact us.

Condition: new, empty load weight: 1,100 kg, maximum load weight: 2,400 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,610 mm, loading space width: 1,850 mm, loading space height: 350 mm, loading space volume: 2.7 m³, color: silver, construction height: 1,180 mm, working width: 2,000 mm, steel drop sides / e-hydraulics / emergency hand pump / parabolic suspension / full steel floor / charger, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * incl. steel drop sides / e-hydraulics / emergency hand pump / parabolic suspension / full steel floor / charger Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 3,500 kg - Unladen weight: 1,100 kg - Payload: 2,400 kg - Interior dimensions: 361 x 185 x 35 cm (L x W x H) - Overall exterior dimensions: 514 x 200 x 118 cm (L x W x H) - Loading sill height: 72 cm - Tires: 185/70R13C steel rim - Brake: yes - Support wheel: yes, automatic - 100 km/h: optional! - incl. vehicle documents Vehicle superstructure: - Floor: solid steel floor, solidly reinforced - Drop sides: solid steel drop sides, hot-dip galvanized, removable - Drop side height: 35 cm - Chassis: high loader, KNOTT parabolic spring axle - Tipping function: yes, three-sided - Hydraulics: electric & can be tipped with emergency hand pump - Tipping angle: approx. 45 / 47 - Steps hydraulic cylinder: 4 steps - Overrun device & brake: KNOTT - Frame/chassis: Welded hot-dip galvanized steel frame - Attachment: at an extra charge - Lashing eyes: 8. Ramps: at extra charge - Lighting plug: 13-pin - Approval: ZBII & COC papers Standard equipment: - Hot-dip galvanized and reinforced solid steel drop sides - Drop sides can be folded to the side and rear - Removable drop sides - Tailgate can also be swivelled - Solid steel floor - Extremely robust - Very stable welded steel frame - Frame completely hot-dip galvanized - Many options available hot-dip galvanized - many sturdy cross members for high point loading - additional longitudinal struts welded in throughout - e-hydraulics for tipping with battery in the box and cover - built-in battery - integrated battery charger, and charge level indicator - emergency hand pump fitted - automatic reverse drive - parabolic spring axles (leaf spring suspension) - KNOTT overrun device and parking brake - ramp shaft as preparation for ramps - sturdy angle lever locks - very sturdy bolted V-drawbar STRENGTHENED - 13-pin plug - reversing lights - large reversing lights plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic center support wheel - registration papers: COC papers Accessories can be retrofitted - please enquire: - 100km/h approval - corrugated grille attachment 60cm - closed sheet metal attachment 60cm - spare wheel - storage box - rear supports - ramps - flat tarpaulin - net hooks - additional lashing eyes - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Duedpfx Ahsu Hr Rtj Nju

Condition: new, empty load weight: 945 kg, maximum load weight: 2,555 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,200 mm, loading space width: 1,680 mm, loading space height: 350 mm, loading space volume: 2.2 m³, color: silver, construction height: 1,200 mm, working width: 1,860 mm, E-hydraulics / emergency hand pump / parabolic suspension / full steel floor / charger, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * incl. E-hydraulics / emergency hand pump / parabolic suspension / full steel floor / charger Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY - Gross vehicle weight: 3.500kg - Unladen weight: 945 kg - Payload: 2,555 kg - Interior dimensions: 320 x 168 x 35 cm (L x W x H) - Overall exterior dimensions: 475 x 186 x 120 cm (L x W x H) - Loading sill height: 72 cm - Tires: 195/50R13C steel rim - Brake: yes - Support wheel: yes, automatic - 100km/h: optional! - incl. vehicle documents Vehicle superstructure: - Floor: solid steel floor, solidly reinforced - Drop sides: anodized aluminium double-walled, 4x folding & removable - Drop side height: 35cm - Chassis: high loader, KNOTT parabolic spring axle - Tipping function: yes, three-sided - Hydraulics: electric & tiltable with emergency hand pump - Tipping angle: approx. 45 / 47 - Steps hydraulic cylinder: 4 steps - Overrun device & brake: KNOTT - Frame/chassis: Welded hot-dip galvanized steel frame - Attachment: at an extra charge - Lashing eyes: 6. Ramps: at extra charge - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Anodized double-walled aluminium drop sides - Drop sides can be folded to the side and rear - Removable drop sides - Tailgate can also be swivelled - Solid steel floor - Extremely robust - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Many options available - Many options available. hot-dip galvanized - many sturdy cross members for high point loading - additional longitudinal struts welded in throughout - e-hydraulics for tipping with battery in the box and cover - built-in battery - integrated battery charger, and charge level indicator - emergency hand pump fitted - automatic reverse drive - parabolic spring axles (leaf spring suspension) - KNOTT overrun device and parking brake - ramp shaft as preparation for ramps - sturdy angle lever locks - very sturdy bolted V-drawbar STRENGTHENED - 13-pin plug - reversing lights - large reversing lights plug - reversing light - large safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic support wheel in the middle - registration papers: COC papers Accessories can be retrofitted - please enquire: - 100 km/h approval - corrugated grid attachment 60 cm - closed sheet metal attachment 60 cm - spare wheel - storage box - rear supports - ramps - flat tarpaulin - net hooks - additional lashing eyes - reversing light - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Duodpfx Ahju Hr Npj Nou

Condition: new, empty load weight: 1,020 kg, maximum load weight: 2,480 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,610 mm, loading space width: 1,850 mm, loading space height: 350 mm, loading space volume: 2.7 m³, color: silver, construction height: 1,180 mm, working width: 2,000 mm, E-hydraulics / emergency hand pump / parabolic suspension / full steel floor / charger, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * incl. E-hydraulics / emergency hand pump / parabolic suspension / full steel floor / charger Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 3,500 kg - Unladen weight: 1,020 kg - Payload: 2,480 kg - Interior dimensions: 361 x 185 x 35 cm (L x W x H) - Overall exterior dimensions: 514 x 200 x 118 cm (L x W x H) - Loading sill height: 72 cm - Tires: 195/50R13C steel rim - Brake: yes - Support wheel: yes, automatic - 100 km/h: optional! - incl. vehicle documents Vehicle superstructure: - Floor: solid steel floor, solidly reinforced - Drop sides: anodized aluminium double-walled, 4x folding & removable - Drop side height: 35cm - Chassis: high loader, KNOTT parabolic spring axle - Tipping function: yes, three-sided - Hydraulics: electric & tiltable with emergency hand pump - Tipping angle: approx. 45 / 47 - Steps hydraulic cylinder: 4 steps - Overrun device & brake: KNOTT - Frame/chassis: Welded hot-dip galvanized steel frame - Attachment: at an extra charge - Lashing eyes: 8. Ramps: at extra charge - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Anodized double-walled aluminium drop sides - Drop sides can be folded to the side and rear - Removable drop sides - Rear flap can also be swivelled - Solid steel floor - Extremely robust - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Many options available - Many options available. hot-dip galvanized - many sturdy cross members for high point loading - additional longitudinal struts welded in throughout - e-hydraulics for tipping with battery in the box and cover - built-in battery - integrated battery charger, and charge level indicator - emergency hand pump fitted - automatic reverse drive - parabolic spring axles (leaf spring suspension) - KNOTT overrun device and parking brake - ramp shaft as preparation for ramps - sturdy angle lever locks - very sturdy bolted V-drawbar STRENGTHENED - 13-pin plug - reversing lights - large reversing lights plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic center support wheel - registration papers: COC papers Accessories can be retrofitted - please enquire: - 100km/h approval - corrugated grid attachment 60cm - closed sheet metal attachment 60cm - spare wheel - storage box - rear supports - ramps - flat tarpaulin - net hooks - additional lashing eyes - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Dujdpfx Asu Hr Raoh Nou