Used Amis Zbp 500 for sale (16,245)

Condition: used, Year of construction: 2013, operating hours: 73,000 h, functionality: fully functional, power: 7,130 kW (9,694.09 HP), output frequency: 50 Hz, nominal power: 7,130 kW (9,694.09 HP), continuous power: 7,130 kW (9,694.09 HP), rotational speed (max.): 1,500 rpm, motor manufacturer: M+M Turbinen-Technik, Evaporation pressure: 21 bar Steam pressure: 4.3 bar Temperature: Inlet 365 °C / Outlet 165 °C Generator: 8300 kWel Operating hours (annually): 8760 h/year Transformers included: Siemens Type 4GU6043-9HY Dwsdpfez E Nh Nox Al Asc Total operating hours: 73,000 h M+M turbines are typically custom-made industrial steam turbines used for combined heat and power (CHP) or for energy recovery from process steam. Due to the moderate inlet pressure and the relatively high outlet pressure, this is a back pressure steam turbine. It was designed for process steam systems to ensure efficient energy recovery and heat supply. The turbine was used in a paper mill to increase efficiency. With an output of 7.2 MW, this turbine is considered a medium-sized system in industrial applications. Thanks to the pressure ratios and the use of the turbine's exhaust steam, very little energy is lost. The estimated steam flow rate is 30 to 40 t/h. This enabled the paper mill to achieve an efficiency of 60% to 75%. The efficiency in CHP operation was approximately 75% to 85%. The turbine was designed for operation for 8,760 hours (full load year) with a maximum steam flow rate of 114 t/h. The turbine-generator unit supplies the paper machine with electricity at the 6 kV level. The process steam required for production is provided in two pressure stages. As the steam flows through the turbine, the steam pressure is reduced from 20 bar to 4.2 bar. If the turbine needs to be shut down for any reason, the process steam supply is provided via four pressure reducing stations connected in parallel.

Condition: used, functionality: fully functional, mileage: 590,517 km, first registration: 04/2022, fuel type: diesel, fuel: diesel, brakes: retarder, color: white, gearing type: automatic, Equipment: air conditioning, airbag, central locking, cruise control, fridge, navigation system, parking air conditioner, parking heater, power assisted steering, retarder, seat heater, SCANIA 500 S - Registration: 04/2022 - Mileage: 590,517 km Djdpfx Alez Hdgpe Ajwc - ADR compliant - Full air suspension - Retarder - Stationary air conditioning - Navigation system - Double fuel tank - Double bunk - Tires with 50% tread *Vehicle price excludes VAT. WE OFFER CUSTOMIZED FINANCING OR LEASING OPTIONS ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, EVEN WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL | NAPLES - CASERTA - PIACENZA D.E. TRUCK S.P.A. | NAPLES - OFFICIAL DEALERSHIP MERCEDES-BENZ AND FUSO TRUCKS DOMENICO ESPOSITO S.P.A. | EBOLI (SA) - OFFICIAL DEALERSHIP MERCEDES-BENZ AND FUSO TRUCKS CONTACTS: 0823 1686306 335 6713062 BUSINESS HOURS: MONDAY-FRIDAY 8:30 AM/7:00 PM - SATURDAY 8:30 AM/2:00 PM WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way - S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder - 770s - Limited Edition - 660 S Semi-trailer - Reefer Semi-trailer – Lamberet - Schmitz Isuzu - Fixed body - Crane - Tipper - 4 axles - 4 Rear Axles - Tway - T-Way - 540 - 460 hp - Xway - X-Way - Three-way tipper - V8 - Scania - Frost Edition - Box body - Drop-side - Reefer cell - Insulated with reefer - Van Domenico Truck srl is not responsible for any discrepancies in technical specifications, options, and features, which may differ from the description in some cases. We invite you to verify the specifications of the specific vehicle.

Condition: good (used), Year of construction: 2012, CNC Turning / Millingcenter Machine type: DMG CTX beta 500 V6 Control: Siemens 840 D Shopturn Year: 2012 Working hours: 42.067 h Spindle running time: 20.209 h SPECIFICATIONS Max. turning length: 500 mm Turningdiameter: 410 mm Max. swing over bed: 700 mm Spindle bore: 87 mm Bar capacity: 77 mm C-Axis: 0,01° Main Spindle: ISM 76 Max. revolution: 5.000 rpm Spindle power: 25 / 34 kW Torque: 280 Nm Collet chuck: Hainbuch Spantop Nova 65 Subspindle: ISM 52 Max. revolution: 5.000 rpm 3-jaw chuck: Berg KHL 200 mm Travel Y-Axis: mm Amount of turrets: 1 Tool: VDI 40 Driven Tools: 12 Dedpsz D Ug Iofx Al Aowc revolution driven tools: 4.000 drive power driven tools : 11,3 kW Equipment Chip conveyor Short Bar Loader: LNS QLS 80 S2 Direct linear scales: X,Y High pressure pumps Toggle filter Tool setter

Condition: excellent (used), mileage: 1,045,496 km, power: 368 kW (500.34 HP), first registration: 08/2008, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, number of beds: 1, Year of construction: 2008, Equipment: ABS, air conditioning, central locking, cruise control, power mirror, = Additional options and accessories = - Aluminum fuel tank - Beacon(s) - High Beams - Lift Axle - PTO - Radio/CD player - Sleeping cabin - Sun visor - Toolbox = More information = General information Number of doors: 2 Cab: single Registration number: 2CSF659 Technical information Engine capacity: 15.607 cc Axle configuration Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Lift axle Weights Empty weight: 9.940 kg Carrying capacity: 16.060 kg GVW: 26.000 kg Interior Number of seats: 2 Condition Technical condition: very good Visual appearance: very good = Dealer information = Dwsdpfsz E Sx Rox Al Asc Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), Year of construction: 2010, operating hours: 5,285 h, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 105 W, type of cooling: air, total width: 1,240 mm, total height: 1,140 mm, total length: 1,920 mm, overall weight: 580 kg, travel distance X-axis: 1,245 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 610 mm, input current: 20 A, laser wavelength: 10,600 nm, input frequency: 50 Hz, Speedy 500 in good condition, coming from a model-making workshop. Few operating hours (5285 hours). Laser source replaced in late 2018 (Synrad firestar ti100; nominal 100 W, 151 W as a new part; 2392 hours of operating time). Power supply also replaced in 2018 (Meanwell RSP-2400). Last service: 08/2026 Extensive accessories included: Laser pointer for precise alignment of the workpiece 5.0" lens 2.0" lens Pass-through – for processing longer sheets Gas kit Dedez Eh Easpfx Al Aswc Cutting table Vacuum table Honeycomb table / aluminum honeycomb core for vacuum table Rotary engraving attachment – for bottles, glasses, etc. iCut software and camera (currently disassembled) Includes Mistral ECO 220V / 50HZ extraction system (motor relatively new). Original new price: €86,708.58

Condition: used, Year of construction: 2016, Marel labeling machine Dedpoxnkh Ssfx Al Aewc - Concept 500 - Top labeller More photos and full specifications: /

Condition: used, mileage: 770,000 km, power: 375 kW (509.86 HP), first registration: 06/2016, fuel type: diesel, overall weight: 26,000 kg, emission class: euro6, Equipment: ABS, air conditioning, crane, navigation system, parking heater, Volvo FH 500 First registration: km I-Shift Roof light bar 6x2 Dwjdpfxjx U N Aws Al Ajc German vehicle from first owner ACC distance control, lane and brake assist Body: Schwarzmüller Crane: Atlas 145.2 Crane year: 2016 ----German/English/Serbian/Croatian/Bosnian/Bulgarian..... Goran German/English/p?????/?????..... Roman We are happy to assist you with financing or leasing. EU sales: net (without VAT) upon presentation of company documents and VAT ID number VAT deposit: €2,000 Our services for you: - Customs license plates - Export documents and EUR1 - Worldwide transport - Overnight accommodation - Transfer from Munich Airport or Passau train station

Condition: used, The item comes with a selection of spare parts, including: bellows segments, graphite sheets, capacitor transmitters, centering rings in various sizes, Pirani transmitters, inline valves, various cables, and more. Dwsdpfx Alezgv R Nj Ajc

Condition: used, Year of construction: 1978, Press force: 500 t Dwjdpfjzyl Drox Al Asc Stroke: 600 mm Frame width: 1550 mm Side frame opening: 1250 mm Shut height (stroke up): 900 mm Table area: 1200 x 1300 mm Cushion force in table: 250 t Cushion stroke in table: 150 mm Cushion area in table: 950 x 950 mm Table height above floor: 1245 mm

Condition: new, Year of construction: 2026, neu 2026 Dwjdpfxjwirmuj Al Aec 070236 prompt, Zwischenverkauf v Türkei 6900 € 133.17 € 1 500 kg 1200 mm 400 mm 550 mm 300 mm 80 mm 1450 mm 1200 mm 1640 mm 260 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control PNEUMATIC PRESSURE ARM ALTERNATIVES (prices on request): Version without pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: new, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: white, gearing type: automatic, Year of construction: 2026, Equipment: ABS, AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), hill-start assist, onboard computer, traction control, trailer coupling, - Adaptive cruise control - Heated mirrors - Leaf spring suspension - Brake booster - Differential lock - Low noise - Speed limiter - Air conditioning - PTO - Rear view camera X TO GO "EUROMIX TO GO" OFFERS YOU IMMEDIATELY AVAILABLE NEW VEHICLES FROM OUR LOCATION IN PORTA WESTFALICA/GERMANY. FOR ALL CUSTOMERS WHO ARE IN AN URGENT SITUATION (SHORT-TERM CAPACITY EXPANSION OR REPLACEMENT INVESTMENT). Your advantages: - Immediately deployable complete vehicles (concrete mixer/tipper) - Immediate availability directly from the manufacturer - Superstructure, assembly, commercial vehicle - Best price-performance ratio - Financing options - Trade-in of your old vehicles VOLVO FMX13 500 8x4 L13 EURO 6e EuromixMTP SCORPION SCO 25-59 Unladen weight: approx. 12,050 kg Payload: approx. 19,950 kg Vehicle data Year of manufacture: 2026 New vehicle Volvo FMX 500 Wheel arrangement: 8x4 Permissible total weight: 32,000 kg Technical gross vehicle weight: 60,000 kg Wheelbase: 4,350 mm Engine: Volvo D13K 12.8 liter in-line six-cylinder Power: 368 kW (500 hp) Torque: 2,500 Nm Emission standard: Euro VI Step E Volvo I-Shift 12-speed automatic transmission Leaf spring suspension front and rear Left-hand drive Day cab Cab color: Winter White Equipment Engine & Drive Volvo D13K Euro VI Step E engine Volvo I-Shift 12-speed automatic transmission Volvo Engine Brake Plus (VEB+) I-See predictive cruise control I-Roll fuel-saving function Economy and Balanced driving programs Reinforced transmission for construction site use Engine auxiliary drive SAE 1410 Transmission oil cooler Two-cylinder air compressor (900 l/min) Dwsdpoz D Utuefx Al Asc Roof air intake Heated fuel filter Chassis Wheel arrangement 8x4 Leaf spring suspension front and rear Front axles 2 × 8,000 kg Rear axle bogie 26,000 kg Planetary rear axles Differential locks Active Grip Control Axle ratio 3.33 Dual power steering Wheels & Tires Steel rims Continental CrossTrac 315/80 R22.5 Tire pressure monitoring system Tire filling hose 20-ton jack On-board tools Cab & Comfort Day cab Air-suspended comfort driver's seat Passenger seat with adjustable backrest Air conditioning with sun sensor Digital 12-inch instrument panel Smart tachograph DTCO 4.1 DAB radio Four speakers Multi-function steering wheel Electrically adjustable and heated exterior mirrors Kerb and front mirrors Roof hatch Central locking with remote control Tinted windows Additional cab insulation Safety equipment Electronic Stability Program (ESC) ABS / EBS Hill start assist Emergency braking assistant (AEBS) Side collision assistant Driver attention assistant Adaptive cruise control Rear view camera Rear warning system LED headlights LED daytime running lights Automatic headlights Additional equipment 275-liter fuel tank 57-liter AdBlue tank Lockable fuel filler caps Body Builder module Electrical superstructure interface VBG trailer coupling Aluminum rear underrun protection

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 7730 € 149.19 € 500 kg 150 mm 150 mm 360 kgm 230 / 50 V / Hz 0.37 kW 0.37 kW 0.1 - 3 U/min 45 s 800 mm M20X6 mm 640 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. Dwedpfx Alsyq Stve Aoc For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) OPTION: Pneumatic centering attachement

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € Dm. 200x78x78 mm 2800 1/min 300 mm 300x150x55 mm 350x150 mm 500x160 mm 3.6 kW 1020 mm 820 mm Dwodpfx Aoyv Iqvjl Aoc 2170 mm 440 kg This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian

Condition: used, Year of construction: 1993, 1500 mm tank diameter / tank height 1500 / 500 mm turning speed range 1500 U/min voltage 380 V volumn 300 Liter power requirement 18 kW Dwedpfexq Hg Ajx Al Aec weight of the machine ca. 1,2 t dimensions 1,5 x 1,6 x 1,6 m Vibration dryer See ??pictures

Condition: used, Year of construction: 2011, Gorreri DVG 500 dispensing unit Dwodpfxsz A Sa Aj Al Aoc Year of manufacture: 2011 Condition: functional Suitable for filling, dispensing, or decorating various types of products made from doughs, creams, jams, and other liquid products. Performance: max. 40 cycles per minute Compressed air: 250 l/min (6 bar) Dimensions L x W x H: 1200 x 600 x 1850 mm Weight: 80 kg

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, rotary table diameter: 450 mm, position of the milling head: Schwenkbar (45°), table diameter: 450 mm, total length: 5,600 mm, gear diameter: 500 mm, total height: 3,100 mm, total width: 3,600 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 340 rpm, table bore: 125 mm, spindle speed (min.): 80 rpm, travel distance X-axis: 325 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, overall weight: 14,800 kg, distance table to spindle center: 350 mm, tool diameter: 200 mm, controller manufacturer: Siemens Sinumerik 840D sl, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A Pfauter PE 500 for the economical production of straight and helical spur gears up to module 12 and 500 mm in diameter – completely overhauled by SerWeMa with Siemens Sinumerik 840D sl, equipped with a gripper unit and a 32-position workpiece storage for unmanned operation. The machine is ready for operation in our hall in Chemnitz: you can inspect it under power, and if desired, we will mill your own sample part and you can take delivery of the machine here. No delivery time, no risk. Sold by Serwema Retrofit Solutions, the company that carried out the overhaul and knows the machine inside out. The general overhaul included complete geometric overhaul by grinding and scraping, new roller bearings in the main drive and in the milling head, measuring and reconditioning the worm gear, overhauled or new ball screw drives, overhaul of hydraulics, lubrication and coolant system, and new electrical equipment with Sinumerik 840D sl, Sinamics S120 and new axis motors. An electronic generating gear controls all generating and single-part machining processes, and an NC-controlled crash recovery protects the tool and workpiece in the event of a power or phase failure. New paint in RAL 7035/5015 with oil and coolant resistant two-component paint, acceptance of geometry according to SerWeMa protocol based on DIN ISO 6545. Dwjdsz Et E Eopfx Al Asc The machine controls six CNC axes: X radial, Y tangential, Z axial, A milling head swivel, B milling cutter drive and C table drive. The SerWeMa gear cutting software guides you through workpiece and tool data via masks, without the need for programming: up to three position-oriented gearings per workpiece, each with its own tool, up to three cuts per gearing with simultaneous or counter-rotating movement, form corrections for convex, conical and convex-conical profiles, lead-in and lead-out phase correction, chamfer milling, dimension correction via tooth width, two-roll or two-ball gauge, measuring stop, shift strategy with defect management per generating cutter and cutting force monitoring with automatic retraction. Technologies: generating milling, single-part milling and worm gear milling both radially and tangentially. A hand-held device with a handwheel allows setup directly in the working area. Technical data: max. workpiece Ø 500 mm, max. module 12, max. milling cutter Ø 200 mm, max. milling cutter length 240 mm, shift travel 200 mm, milling cutter speed 100–450 rpm, swivel angle +25°/−45°, travel radial 325 mm (axis distance 25–350 mm), travel axial 400 mm (310–710 mm), table diameter 450 mm, table bore 125 mm, connection power approx. 60 kVA. Installation dimensions incl. automation approx. 7.2 × 4.5 × 3.3 m, weight approx. 16.8 t. Equipment: machine enclosure, chip conveyor, gripper unit with two grippers, workpiece storage with 32 positions, preparation for emission extraction (150 mm nozzle, Harting connector on the machine roof). Documentation complete in German: operating manual, electrical diagrams with parts lists, hydraulic and lubrication diagrams. Serwema optionally offers: trial part milling in our factory, additional milling arbors, assembly and commissioning at your location, operator training and a control system upgrade to Sinumerik ONE. Spare parts and service come from a single source, worldwide, even after the purchase.

Condition: used, Year of construction: 2001, Lippert belt conveyor GF 780-650-500 RA1430 The Lippert conveyor belt is from 2001 and in good (used) condition. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 780 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): with frequency converte adjustable Drive: SEW gear motor R17DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type SNB-5E Year of construction: 2001 Optionally available: motor with MOVIMOT frequency inverter to control the speed Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Djdpfx Aljk Abumo Aewc For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2004, Transnorm Roller Curve Conveyor 45° links 565-500 IR 750 RA1283 The Transnorm roller curve is from 2004 and in a good (used) condition. It has a sEW mid-engine with brake. Supports are included in the scope of delivery. Technical data: Manufacturer: Transnorm Type: TS 2712 Roller curve 45° left Built: 2004 Condition: good (used) Engine: fully functional Angle: 45° Inner radius (IR): 750 mm Dwjdpfxjk Aa R Dj Al Aoc Nominal/outer width (NB):565 mm Belt width (GB): 500 mm Engine Type: SEW Gear motor with brake Engine Power: kW 0.37/0.37/S1 Hz 50 A 2.15/1.24 Drive: Center drive Funding speed: 30 m/min Weight: 84 kg Scope of delivery: incl. 2 supports (height adjustable) Price: plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: approx. 3 - 5 working days after receipt of payment Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Legi-Air 4040Z with Zebra110pax4 label printer and pneumatic stamp. Dwsdpfx Aljk Ablls Asc RA1933 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status indicator and buttons Print type: thermal transfer printing or direct thermal printing selectable Interfaces: RS 232 Seriel, IEEE 1284 Print media: standard media, tags and RFID media (reading and coding of RFIF labels) label length min: 12,7mm width print media: 16-114mm ribbon width: 25,4-107mm Ribbon length max: 900m Roll size diameter core: 25,4mm Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) dot size 0,125mm x 0,125mm Print speed: 12 inch/second

Condition: used, Year of construction: 2014, Transnorm conveyor belt GF 11380-600-500 RA2095 Technical data: Conveyor length (NL): 11380 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, SA37/T DRS71M4/MM07/LN Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change,13 - 32 m/min Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Dodpfx Alsrzd Ale Aewc Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1998, Transnorm Rising falling Incline belt conveyor GF 4900+4100-600-500 RA2193 Technical data: Conveyor length (NL): 9000 mm ( 4900 mm + 4100 mm ) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Dedpfx Aoq H T Spol Aewc Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 1996, condition: used, X-axis: 525mm, Y-axis: 400mm, Z-axis: 450mm, Y-axis at electrode change and loading position: 675mm, internal dimensions of working tank: 750x650x420mm, max. dielectric level: 375mm, max. head load: 100kg, distance from tool carrier plate to worktable: 135-585mm, integrated C-axis speed, adjustable: 1-20rpm, measuring resolution: 0.001°, load capacity with manual electrode change: 50kg, load capacity with automatic electrode change: 15kg, support surface: 730x630mm, worktable load capacity: 1,000kg, connected load: 7kVA, fuse protection: 25A, length: 2900mm, width: 2200mm, height: 2653mm, machine weight: 4.4t, generator weight: 200kg, with documentation, C-axis, EW20 electrode changer, TAE M10 cooling unit, CO2 fire extinguishing system, 4µm filter system, locators, MultiProg software, an on-site inspection is possible. Dedpfxsz Ekc Uo Al Aewc

Condition: used, Year of construction: 2008, Dematic belt conveyor 8105-500/400 Ascending conveyor, drive, shaft mounted gearboxes Built in 2008 Length incl. task band: 8,105 mm Dwedpfx Ask Aa Eqol Asc Width: 500 mm Belt width: 400 mm Climbing belt with bow piece nubbed belt Habasit Task band smooth strap, length: 733 mm with exaggerated Sheet piece 2 St. kinks adjustable Bow piece 1: 663,5 mm Sheet piece 2: 631,77 mm rubberized drive drum Drive: SEW 400 V, 0.75 kW 2.1 A RPM 13000, number of drive shaft RPM 68 Speed v = 0, 35m / sec. and 21 m / min. If necessary optional: 5 units, high-demand support Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, 90° roller curve left + 880 mm straight piece as combination Make: Dematic Rolling curve: 90° link running Dodpfx Ask Aa Izel Aswc Width: 440 mm Nominal width (overall width incl. sidewalls): 500 mm Inner radius of the curve: 765 mm Straight piece: Length: 880 mm Width: 440 mm Total width: 500 mm Roles, bright zinc-plated Scale: 70 mm Gearmotor: Make Franz Bangert optional Guide on both sides 3 support Height role OK 800 +/-100 mm Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, 90° roller curve right Make: Dematic Direction: 90° right serial Width: 440 mm Nominal width (overall width incl. sidewalls): 500 mm Inner radius of the curve: 765 mm Guide on both sides including 2 support: optionally available Height role OK 800 +/-100 mm Dodpfxek Aa I Eo Al Aswc Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik