Used Alup Kompressoren Gmbh Air Compressor for sale (83,105)

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 250028, power: 250 kW (339.91 HP), pressure (min.): 4 bar, pressure (max.): 13.5 bar, The pneumatic container is used to provide oil-free, dry compressed air for test equipment. TECHNICAL DETAILS Maximum air flow: 42.83 m³/min Pressure range: 4 - 13.5 bar Oil-free compressed air capacity: 42 m³/min at max. 7.5 bar Drive Motor power: 250 kW System structure Compressor: EKO 250 D Refrigeration dryer: HHDp 4500 / HF 5-M/5 Activated carbon adsorber: BEKO Clearpoint L 3400 V Post-filter: HF 6-60 Oil-water separator: BEKO Öwamat 16 Electric condensate drain: BEKO 14 MACHINE DETAILS Dkedpfsv Rdltex Al Aou Compressor unit: 4,000 x 2,100 x 2,500 mm Overall dimensions (L x W x H): 13,000 x 2,950 x 2,900mm Total weight: 20,000 kg

Condition: like new (used), Year of construction: 2022, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: DD10059787001, overall weight: 4,000 kg, total length: 2,500 mm, total width: 1,400 mm, total height: 2,000 mm, power: 132 kW (179.47 HP), pressure (max.): 13 bar, type of cooling: air, New frequency-controlled machine with heat recovery. Conversion because the air requirement is no longer met. Djdowhu U Espfx Al Aeku

Year of construction: 2025, condition: new, Parker-Airtech presents the latest generation of nitrogen generators, which impress with an outstanding air factor on the market. Our systems are characterized by the exclusive use of high-quality components, which ensures their longevity and reliability. The cost-effective operation of the system is characterized by low power consumption with maximum output, low-maintenance operation of the system, no additional gases such as hydrogen to reduce oxygen and high-quality and durable components. Djdpfewzv Hijx Al Aoku This means that the system can pay for itself in the shortest possible time. An intelligent monitoring system enables continuous monitoring of the operating parameters and ensures that you are always informed about the status of your system. Whether in the office or on the go - our system can also be conveniently viewed on your mobile phone, so that you always have control over your nitrogen production. The system is individually tailored to your needs. Parker-Airtech has made it its mission to offer you the best technologies to optimally support and maximize your processes. Trust in innovation, quality and performance - choose Parker-Airtech.

Condition: new, Year of construction: 2014, functionality: fully functional, Oil separator cartridge 6.2013.0 Original Kaeser spare part Dodpjvkfzcofx Al Aeku Suitable for Kaeser compressors: CS 75, 76, 90, 91, 120, 121 From stock We are on vacation until 06.01.. Your request will be processed afterwards. Warranty and returns are excluded from this advertisement.

Condition: excellent (used), Year of construction: 2009, operating hours: 99,000 h, functionality: fully functional, overall weight: 2,400 kg, fuel type: electric, volume flow: 1.368 m³/h, pressure (max.): 13 bar, COMPAIR L132SR-13A Screw compressor serviced, for sale in excellent condition 123kw power, air flow: 420 m3/h Manufacturer: Compair L132SR 13A year of manufacture: 2009.04 operating hours: 99000 Drive power: 132Kw Pressure 13 bar Flow rate: 22.8 m3/min Delcos XL control Dkjdpjtvwwbefx Al Aou Main rotor RPM: 2980 voltage: 400v 50Hz 3 phase 85A machine weight: 2358 kg dimensions: 1722 x 920 x 1659

Condition: used, Year of construction: 2014, operating hours: 53,000 h, machine/vehicle number: APF 194907, pressure (max.): 7.5 bar, rotational speed (max.): 1,485 rpm, TECHNICAL DETAILS Maximum operating pressure: 7.5 bar Input power: 355 kW Shaft speed: 1,485 rpm MACHINE DETAILS Operating hours: 53,000 h Dkjdpjy Ia R Sefx Al Aou EQUIPMENT Atlas Copco air dryer, model: MD1000 W CE Maximum operating pressure: 10.5 bar Year of manufacture: 2014

Condition: good (used), Manufacturer: KAESRER Year of manufacture: 1999 Type: AIRTOWER 11 Item number: 1.8833.10020 Serial number: 1010 Operating hours: 5,766 h Pressure: 7.5 bar Delivery volume: 975 l/min Motor speed: 3,000 rpm Connection: 7.5 kW Dryer: TU 11 Dkodpfx Aowhwx Hol Aju Refrigerant: R 134a Pressure: 16 bar Condition: Good Weight: 270 kg Dimensions: 680 x 780 x 1,300 mm

Condition: new, Year of construction: 2025, Parker-Airtech presents the latest generation of nitrogen generators, which impress with an outstanding air factor on the market. Our systems are characterized by the exclusive use of high-quality components, which ensures their longevity and reliability. The cost-effective operation of the system is characterized by low power consumption with maximum output, low-maintenance operation of the system, no additional gases such as hydrogen to reduce oxygen and high-quality and durable components. This means that the system can be amortized in the shortest possible time. An intelligent monitoring system enables continuous monitoring of the operating parameters and ensures that you are always informed about the status of your system. Whether in the office or on the go - our system can also be conveniently viewed on your mobile phone, so that you always have control over your nitrogen production. The system is individually tailored to your needs. Dedpfjwzv Hcsx Al Asku Parker-Airtech has made it its mission to offer you the best technologies to optimally support and maximize your processes. Trust in innovation, quality and performance - choose Parker-Airtech.

Condition: used, Oil-water separator KAESER BEKO, type Öwamat Tank diameter: 600 mm Overall height: 1200 mm Dsdpfxjy Ty Saj Al Aeku With activated carbon filter Space requirement: Ø 700 x 1200 mm Weight: approx. 30 kg In good condition.

Condition: used, Year of construction: 2002, operating hours: 36,000 h, total length: 2,350 mm, total width: 1,320 mm, Boge S 101 Screw Compressor Year of manufacture: 2002 Volume flow: 13.1 m3/min Operating pressure: 8 bar Motor speed: 3000/min Motor power: 75 + 2.2 kW Dsdpfx Alsxfwrxe Asku Operating hours: approx. 36,000 h

Condition: like new (used), Year of construction: 2009, operating hours: 100 h, functionality: unexamined, overall weight: 10,250 kg, total length: 5,000 mm, total width: 2,100 mm, total height: 2,400 mm, power: 530 kW (720.60 HP), fuel type: electric, operating pressure: 3 bar, Equipment: type plate available, Make Ingersoll Rand Model: CH6-C125MX1 Year of manufacturing: 2009 Serial no: V-7667 Working hours (on service meter): Low hours!! Capacity (Kw) 530 Voltage 400 Frequency (Hz) 50 Rpm 2980 Amps (A) 920 Dimensions LxWxH (mm) 5000 x 2100 x 2500 Weight (kg) approx. 10250 Total quantity in stock 1 Capacity (m3) 7.66 Nm3/h Max. pressure (Bar) 2.8 Country of origin Italy Comments Almost Unused compressor Dedpfx Aov A T Uhol Aoku

Condition: used, Year of construction: 2007, Compressor for pneumatic supply Additional title: air-cooled rotary compressor Operating hours: 24940 Capacity: 3,37 m3/min Operating pressure: 10 bar Rotational speed: 1460 rpm Power: 30 kW Voltage: 400 V Dkedpjzty R Tjfx Al Aou Frequency: 50 Hz Length: 1280 mm Width: 800 mm Height: 1220 mm Weight: 700 kg Features: Oil type E2000

Condition: used, Year of construction: 2016, Offered is a pad printing machine with protective enclosure. Equipped with plate holder, printing pads and remaining inks, where available. Operating usage: approx. 4000 cycles/year. Weight: approx. 400kg. Overall dimensions X/Y/Z: approx. 1300mm/1000mm/1790mm. Inspection possible by arrangement. Dkjdpfxoz Irl Ne Al Asu

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets Djdpfez Agv Uox Al Aeku - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. Dkodpfxsz Agw Ej Al Asu - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. Djdpsz Ag Rrsfx Al Aoku - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 052, turning length: 140 mm, turning diameter: 30 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 200 rpm, spindle motor power: 9,000 W, rotational speed (min.): 200 rpm, rotational speed (max.): 6,000 rpm, total height: 1,800 mm, total length: 1,800 mm, total width: 1,200 mm, type of input current: AC, overall weight: 2,000 kg, Equipment: rotational speed infinitely variable, Transco Drehautomaten GmbH Type (Typ): tc10 Serial Number (Nr.): 052 Year of Manufacture (Baujahr): 2023 Machine Category: CNC Automatic Lathe (Second Operation / Audrema® series) Maximum Part Length: 140 mm (120 mm shank + 20 mm head) Maximum Workpiece Diameter: 30 mm Production Rate: Up to 35 parts per minute Control System: Siemens CNC Djdpfx Aljz Ih Hco Ajku ControlMain Drive Power: Up to 9 kW Part Changing / Loading Times: Collet chucking (free drop): 1 s. Collet chucking (guided drop): 1.5 s. Three-jaw chucking: 2 s. Located in Israel l.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 24-042, overall weight: 200 kg, type of input current: AC, input voltage: 230 V, belt width: 400 mm, Magnet with neodymium head roller (can also separate slightly magnetized stainless steel parts), small conveyor belt (drum motor), and feed chute. The conveyor belt and feed chute are adjustable. Dkodpfez Ihbgox Al Aju The machine is mobile on rollers, available immediately, and the price may be negotiable.

Condition: new, Year of construction: 2010, functionality: fully functional, Oil separator cartridge 6.2010.0 Original Kaeser spare part From stock sale We are on vacation until 06.01. Your request will be processed afterwards. Dedpevkfzijfx Al Aeku Warranty and returns are excluded from this advertisement.

Condition: used, Year of construction: 2019, Compressor with tank and dryer Airpress VSD22 INTEGRA Serial no. R4337F/2019 Year of manufacture 2019 Max 8 bar Power 22 kW 120 cfm 204 m³/hr Tank capacity 600 L Effective capacity 996 l/min Dkedpfx Ajwh Ncqsl Aeu Refrigerant R407C 400 V Dimensions 1950 × 878 × 1785 mm, weight 775 kg - Year: 2019 - Documentation available: Yes - CE certificate present: No - Serial number: R4337F/2019 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Filter assembly, COMPAIR filter unit for compressor systems Compressed air filter Type: CF 0087B ZP Manufacturer's number: 3363006 / 05 / 005 Operating pressure: max. 16 bar Threaded connection: G 1 1/2" Flow rate: approx. 8.5 m³/min Dsdpfx Ajhalvdsl Ajku Filter element number: CE 0087B - Filter housing made of aluminum Weight: 5 kg Dimensions L x W x H: 125 x 110 x 420 mm Good condition

Condition: used, Compressed air dryer PARKER HIROSS for compressor systems Mechanical condensate separator, water separator Refrigerant dryer with water-cooled aftercooler for removing water vapor and cooling the compressed air or gases. 1 aftercooler, type WFN009 DHH16 Air flow rate (normal): 540 m3/h = 9000 liters/min. Operating pressure (air): max. 16 bar Housing length: 1020 mm Housing diameter: Ø 105 mm Threaded air connection: G 2" Threaded water connection: G 3/4" Weight of aftercooler: 11 kg Dimensions of aftercooler (L x W x H): 1030 x 850 x 200 mm + 1 water separator, type CSP 008 Flow rate (normal): 480 m3/h = 8000 liters/min. Operating pressure: max. 16 bar Dkedsdzqn Uepfx Al Aju Threaded connection: G 2" - Filter housing made of aluminum + 1 mechanical condensate separator HIROSS SAC 120 Threaded connections: R 1/2" Operating pressure: 16 bar Volume: 0.8 liters - Operates without compressed air loss All components mounted as shown in the pictures. Height when mounted vertically: 2000 mm Total weight: approx. 40 kg

Condition: new, Year of construction: 2021, functionality: fully functional, Oil separator cartridge 6.3789.0 Original Kaeser spare part Suitable for Kaeser compressors: ASK 27/32/35/ Dedpfx Aevkfzpjl Aoku From stock We are on vacation until 06.01. Your request will be processed afterwards. Warranty and returns are excluded from this advertisement.

Condition: new, MyEnergyBox – The turnkey energy storage solution for businesses and municipalities, as well as private households with electric vehicles. Do you want to reduce your energy costs, minimize peak loads, and become more independent from the power grid? With MyEnergyBox, you receive a completely pre-assembled and ready-to-use energy storage solution for commercial, industrial, agricultural, hotel, municipal, residential, and energy-intensive operations. Your advantages: ✅ Reduce electricity costs – up to 50% depending on the application ✅ Reduce peak loads (peak shaving) ✅ Optimize self-consumption of photovoltaic systems ✅ Emergency power supply in case of power outages ✅ Connection of e-charging stations possible ✅ Expandable and modular design ✅ Safe LiFePO4 battery technology ✅ Integrated climate control ✅ Robust steel container design ✅ Delivered ready to use Ideally suited for: - Industrial companies - Production facilities - Agriculture Dksdjziuzxopfx Al Aeu - Hotels - Municipalities - Swimming pools - Cold storage facilities - Logistics companies - Car dealerships - Operators of e-charging infrastructure Technical data and prices, see attached images.

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Dkodpfxjz Hngmo Al Aeu Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site.