Used Al-Ko Power Unit 300 P - Sofort Verfügbar - for sale (89,998)

Condition: new, Year of construction: 2025, Edge grinding machine with an overhead feed mechanism What distinguishes the Uniq-S from the Uniq is the feed system integrated into the machine table, featuring a rubberized feed belt and an overhead pressure bar. This significantly simplifies the grinding and production of bevelled and chamfered edges, as well as the serial grinding of workpieces. Furthermore, it provides assistance when processing exceptionally large or small parts. The feed speed can be continuously adjusted between 3 and 15 m/min. A soft conveyor belt at the bottom and rubberized rollers on the upper pressure bar gently convey the material. An optional second, lower conveyor belt is also available. The upper pressure rollers can also be replaced with a rubber band, which is particularly helpful when grinding extremely small parts. The Uniq-S is recommended as an all-rounder that enables all types of processing – from solid wood to fine veneer edges – with high quality. The continuously adjustable feed speed allows for optimal adaptation to the material. 1. Grinding station: “Veneer side” 2. Grinding station: “Solid wood side” 3. Grinding station: “Additional table” 4. Grinding station: “Half-round table” Location: Available from stock in 54634 Bitburg - immediately available - Podpohqb Rcjfx Af Sorb

Condition: new, Year of construction: 2026, Motorized thickness table adjustment with two speeds Digital display for working height Thickness table made of cast iron The thickness table is mounted on four large trapezoidal-thread spindles for maximum stability and precision Four feed speeds Optionally available with two rollers in the thickness table Standard with noise and chip protection curtain at infeed and outfeed Adjustable pressure for feed rollers Front infeed roller with helical toothing Outfeed roller with rubber coating Powerful industrial motor Equipment Details TERSA models with Tersa cutterhead Cutter changes in seconds When the machine starts, centrifugal force automatically tensions the blades – self-locking Blade projection adjusts automatically without the need for setting gauges Work Table The work table is mounted on four large trapezoidal-thread spindles to ensure maximum stability under all operating conditions Standard with electric table adjustment A special lifting system ensures the table position is perfectly maintained even without mechanical locking Helical-toothed steel infeed rollers for constant and uniform wood feed Second, rubber-coated outfeed roller Heavy-duty anti-kickback devices prevent kickback of workpieces A 4-knife cutterhead ensures optimal planing results Dimensions and Weights Length approx. 1305 mm Width/depth approx. 1080 mm Weight approx. 750 kg Dust Extraction Connection Extraction port diameter thicknesser 150 mm Drive Performance Main motor 9 kW Installation information Space requirement length 1305 mm Space requirement width/depth 1080 mm Space requirement height 1197 mm Space requirement explanation: Measurements account for maximum travel or usable length. Machine body length 1305 mm Machine body width/depth 725 mm Length 1000 mm Width 2000 mm Working area explanation: Please add stated dimensions to space requirement to obtain the recommended clear installation area for the machine. Thicknessing Thickness table length 630 mm Thickness table width 1000 mm Min. working height 3.5 mm Max. working height 300 mm Min. working length 210 mm Max. cutting depth 8 mm Electrical Data Connection voltage 400 V Phases 3 Ph Current type AC Mains frequency 50 Hz Cutterhead Type TERSA Diameter 120 mm Number of blades 4 Speed 4,500 rpm Max. planing width 630 mm Feed Speed 5/8/12/18 m/min Prsdjy Eg Apepfx Af Sob Location: Ex stock 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2024, The Uniq series is a full-fledged base model in our product range and shares all the characteristics that have made the Kündig edge sanding machine renowned in the market as a robust, versatile precision tool. Part of its extremely robust construction is the motor-driven oscillating sanding unit, which offers a maximum oscillation stroke of 90 mm and the possibility of motor-driven inclination of up to 45°. All common edge processing operations can be performed at the up to four sanding stations. Psdpfxofig Rwe Af Ssrb Kündig Uniq edge sanding machine, front and rear Ingenious design – the sanding unit The heart of all our edge sanding machines is the sanding unit. It offers a range of intelligent functions and features. For example, in our machines, the sanding belt does not oscillate by tilting the belt rollers. Instead, the entire sanding unit moves up and down. The oscillation stroke, as well as the oscillation range, are easily set by pressing a button. Thanks to the flexible adjustment and the large oscillation stroke, sanding belts can be used optimally over their entire width, without laborious adjustment of the worktable height. The oscillation mechanism is driven by a separate motor. The tilting of the sanding unit is also conveniently done using a rotary switch and with the help of its own motor. The unit can be tilted between 90° and 45°. Thanks to the well-thought-out pivoting mechanism, the full oscillation is always available and simultaneous sanding on both sides is possible. The different table heights of the front and rear sanding stations also ensure that the belt is not used at the same height at the same time. Furthermore, the combination of the pivoting mechanism and the different table heights ensures that the distance between the sanding unit and the worktable remains minimal at every angle of inclination. Changing the belt is also quick and easy, taking only seconds. The four sanding stations 1. Sanding station: "Veneer side" The front sanding station is used for the precise calibration of materials and functions like a planing machine. The feed stop is adjusted using a rotary handle to set the material removal to within a tenth of a millimeter. Importantly, the stop is not tilted. The feed stop, sanding pad, and discharge stop are always parallel to each other. Rounding of workpieces is thus excluded. Fine adjustment of the sanding pad for grain compensation or setting to zero between stops and pad is possible via a handwheel. The massive worktable is fitted with sliding pads on this side. 2. Sanding station "Solid wood side" This station is ideal for sanding flat, angled, chamfered, or externally rounded workpieces. Again, the entire sanding unit oscillates. The belt runs across its entire width on a graphite surface that keeps it cool. On the solid wood side, there is also a mitre stop. Supplied accessories: Half-round table Additional table with sanding rollers Location: In stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Woodworking Machines, Table Saws, Minimax twf55 es Article number: 5502261 Stable steel and cast iron construction Anodized aluminum format sliding table Large-sized cast iron milling head, swiveling up to -45° backwards Four milling speeds from 3500 to 10000 min¯¹ Right-left rotation as standard Display for height and inclination, accurate to 1/10 mm Fast and easy speed change via eccentric clamping Solid and precise cast iron table, stress-free and annealed for lasting precision Powerful 5.0 kW industrial motor Arc milling hood included Made in Italy Dimensions and Weights Length (product) approx. 1200 mm Width/Depth (product) approx. 2000 mm Weight (net) approx. 510 kg Dust extraction connection Dust extraction port diameter 2 x 120 mm Work table Work table length 1200 mm Work table width 530 mm Table height 900 mm Sliding table length 1200 mm Sliding table width 360 mm Sliding table height 142 mm Installation information Space requirement length 2800 mm Space requirement width/depth 2910 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Machine body length 1200 mm Machine body width/depth 846 mm Working area length 1600 mm Working area width/depth 2300 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Electrical data Connection voltage 400 V Mains frequency 50 Hz Power of drive motor 5.0 kW Milling spindle Spindle inclination 0 to -45° Usable spindle length 125 mm Spindle speed(s) 3500/6000/8000/10000 min¯¹ Milling spindle speed display LED on the front of the machine Spindle arbor diameter 30 mm Milling tool diameter max. Tool diameter max. 240 mm Tool diameter max. with lowering 230 mm Tool diameter max. for profile milling 240 mm Tool diameter max. for mortise milling 320 mm Prjdpfx Aei Dphtof Seb EQUIPMENT Equipment Aluminum sliding table ✔ Milling fence Heavy-duty professional version with hold-down, protective cover and aluminum milling fence cheeks Telescopic miter fence with two folding stops Extension table ✔ Arc milling protection hood ✔ Eccentric clamp ✔ Handle on the sliding table ✔ Spindle height adjustment manual Spindle inclination adjustment manual Control manual height and swivel adjustment of the milling unit Position of control elements on the machine body Location: In stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Jointer-Thicknesser minimax fs 41es TERSA Maximum configuration for the professional user. Article number 5503431 Brand Holzkraft / SCM Helically toothed steel infeed roller for consistent and uniform material feed, enabling chip removal starting from 0.2 mm (with a minimum workpiece thickness of 3 mm) – ideal for economical planing of precious woods. Models with a TERSA cutterblock for seconds-fast planer blade changes and particularly quiet operation. Material feed with two speeds. Particularly long jointer tables enable easy and precise jointing of workpieces. Work tables made of grey cast iron, annealed and stress-free, making them insensitive and permanently flat. Tables that open simultaneously towards the rear for short setup times. Thickness table adjustment via handwheel with numerical display for planing height. High machine weight for maximum precision and smooth operation. Powerful industrial motor. Robust steel/grey cast iron construction. Quality – Made in Italy. TECHNICAL DATA Dimensions and Weights Length (product) approx. 2200 mm, Net weight approx. 450 kg Width/Depth (product) approx. 1160 mm Jointer Total length of tables 2200 mm, Jointer fence length 1200 mm Working height 905 mm, Jointer fence height 150 mm Chip removal max. jointer 5 mm Connection for dust extraction Dust extraction nozzle diameter thickness 1 x 120 mm Thicknesser Thickness table length 775 mm, Working height thickness max. 240 mm Thickness table width 410 mm, Chip removal max. thickness 5 mm Working height thickness min. 3 mm Electrical Data Power drive motor 5 kW, Mains frequency 50 Hz Connection voltage 400 V Planer cutterblock Planer cutterblock type TERSA, Planer cutterblock speed 5000 min⁻¹ Planer cutterblock diameter 95 mm, Planing width max. 410 mm Number of planer blades 4 pcs Feed Feed speed 6 / 12 m/min SCOPE OF DELIVERY Jointer fence with round bar guide & auxiliary fence Two feed speeds Tersa cutterblock Location: In stock, 54634 Bitburg Predpfxjlht Hto Af Ssb - immediately available -

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with Tersa cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Prjdpfxsqlckpo Af Ssb Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Shafts dedicated for IMPACTOR 250/850, COMPACTOR 300, EKOMAXX 800. Option to place orders including cassette and screen basket. - BETONWELLE - PADDLE - STAR (4-KNIFE, 6-KNIFE) - TRAPEZOIDAL PROTECHNIKA is a company with 21 years of experience, specializing from the outset in the production of spare parts and complete recycling lines. In recent years, we have expanded our portfolio to include the manufacture of cutting shafts for slow-speed shredders. By implementing automated welding processes and utilizing proprietary production technology, we have minimized production times while maintaining consistent, high quality. The production of cutting shafts is carried out serially, which among other benefits, enables us to collaborate with machinery manufacturers as an OEM partner. What sets PROTECHNIKA apart from the competition? It's simple! - Certified 3.1 materials - TUV SUD Rheinland quality certification - ISO 9001 compliance - Automated welding process / ISO 15613 / ISO 15614 - Welders qualified to ISO 9606-1 - ISO 9001:2015 - ISO 14001 Prodex Hhkqjpfx Af Ssb - Independent design department capable of meeting all customer requirements - Proprietary RESEARCH AND DEVELOPMENT CENTRE Customer relations are of the highest importance to us, because their satisfaction is our success!

Year of construction: 2026, condition: new, functionality: fully functional, Belt press POWERPRESS 300 is designed for pressing fruit, berry and vegetable mash. Fruit mash is supplied on the belt which presses it against shafts. The obtained juice flows into a small collection tank under the press with filtration sieve on top. Then the external pump or juice collection tank with pump transfers the juice from the press to a desired storage tank or straight to ROCKET pasteurizer for further processing. The pressing process is continuous. Capacity: 300 kg/h The most cost-efficient belt press in the market! The most evolutionary feature of our Belt press POWERPRESS 300 is one huge pressing shaft, which lets the machine to maintain the longer pressing time (belt length is 4900 mm) and huge shaft dimensions squeezes the juice efficiently by saving the costs and space. The juice yield of apples using our belt press is ~65-75 %. The yield highly depends on freshness and variety of fruits. There is a filtration sieve integrated into the juice collection tank. Because of that the belt press 300 filtrates the juice even during the pressing stage providing cleaner and purer product. The belt press includes a high-pressure washer, which continuously washes the belt of the machine. Our belt washing system is simple, does not contain any engines or reducers, so it prolongs the use time and saves service costs. Pedpfst Rft Usx Af Sjrb Adjustable fruit inlet lever lets fruit mash supply onto the shaft easily. Crushed fruit mash can be supplied from MAXIMILL or straight from a bucket or basket. After work, belt press should be manually washed with a water stream. A full washing process takes around 15 minutes. Washing is simple and all the parts of the belt press are easily removable without any tools. Belt tension is adjustable. The machine is made entirely of stainless steel and has adjustable feet. Easy to clean with no closed or inaccessible spaces, all parts are easy to assemble.

Condition: excellent (used), ALKO 200 clean air extraction unit with frequency converter – used Air filtration using filter hoses, Pneumatic cleaning system, Dust-tested, Movable collection container, Frequency converter, Pressure transmitter for demand-based control ----- Technical Data ----- Extraction nozzle diameter: 200 mm, Nominal volume flow: 2,261 m³/h, Max. negative pressure: 2,446 Pa, Number of filter bags: 2, Motor: 4 kW, Compressed air connection: Max. 8.5 bar, Dimensions (L x W x H): 2,280 x 1,010 x 2,050 mm, Weight: 470 kg Quality information: Prsdpfx Ajzg A N Eef Ssb - Complete basic inspection - Complete basic cleaning - Pneumatic system checked - Ready for immediate use

Year of construction: 2026, condition: used, New: Yes Empty weight: 400 kg Dimensions of cargo space: 150 x 130 x 107 cm CE mark: yes Please contact Team DPX for more information Pedpeznr Dbjfx Af Sjrb AC400V-200kW Automatic Load Bank Rated Voltage: 3P4W AC400V 50/60 Hz Rated Voltage & Frequency: 400VAC; 3 phase 4 wire, 50/60 Hz Power Supply: 3P5W AC400V 50 Hz Rated Power: 200 kW at 400V Duty Cycle: Continuois Cooling Type: Forced Air Cooling (Horizontal air intake and exhaust cooling, there will be louver at air outlet and inlet.) Load Steps: Resistive Load: 9 steps, 1, 2, 2, 5, 10, 10, 20, 50, 100 kW Wire Connection: - Load bank input— busbar (star coupling “Y”) - Control power input—terminal block Communication Interface: RS232/RS485

Condition: excellent (used), mileage: 168,410 km, power: 500 kW (679.81 HP), first registration: 10/2021, fuel type: diesel, axle configuration: 8x2, fuel: diesel, brakes: intarder, color: black, gearing type: automatic, emission class: euro6, loading space length: 6,000 mm, loading space width: 2,500 mm, Year of construction: 2021, operating hours: 2,081 h, Equipment: ABS, AdBlue, air conditioning, electric window regulation, = Additional Options and Accessories = - Aluminum fuel tank - High beam headlights - Low noise - Air suspension - Rear view camera - Sun visor - Toolbox - Power take-off (PTO) = Additional Information = Axle configuration Front axle 1: Steered Front axle 2: Steered Rear axle 1: Lift axle; Steered Weights Unladen weight: 21,600 kg Payload: 10,400 kg GVWR: 32,000 kg Functional Mast: Telescopic (13 sections) Lifting capacity: 12,900 kg Superstructure brand: PALFINGER PK 65002-SH F +PJ 125E CE marking: yes Condition Technical condition: very good Optical condition: very good SCANIA P500 8x2*6 WITH PALFINGER PK65002-SH F POWER LINK PLUS + PJ125 E JIB CRANE An excellently equipped Scania P500 8x2*6 with a Palfinger PK65002-SH F Power Link Plus loading crane and PJ125 E jib, combining highest performance, reach, and versatility. This impressive combination is ideally suited for construction, industrial, infrastructure, and assembly applications where maximum lifting capacity and large reach are required. Powered by a powerful 500 hp Scania engine and equipped with a modern Palfinger crane system with 13 hydraulic extensions, a winch, and radio remote control, this vehicle is immediately ready for the most demanding lifting and transport tasks. Vehicle data Scania P500 Euro 6 L-package 500 hp engine Drive: 8x2*6 Wheelbase: 4,800 mm Air-suspended chassis Technically permissible total weight: 35,000 kg Automatic transmission with retarder Trailer coupling P cab Air conditioning Navigation system Telephone preparation Rear view camera Rotating beacon Air horns Open loading area Length: 6.00 m Width: 2.53 m Several toolboxes Crane specification Palfinger PK65002-SH F Power Link Plus + PJ125 E Jib 13 hydraulic extensions Hydraulic winch 4-point hydraulic outriggers Radio remote control Predozc U Dzopfx Af Seb Maximum lifting capacity: 12,900 kg Lifting capacity at 18.2 m: 2,500 kg Lifting capacity at 31.0 m: 470 kg Maximum working height: 35.0 m Highlights High-performance loading crane with large reach Excellent lifting capacity over the entire working range Fully operable via radio remote control Ideal for construction, industrial, and assembly applications Comfortable and comprehensively equipped cab Ready for immediate use This Scania P500 with Palfinger PK65002-SH F Power Link Plus and PJ125 E jib offers a perfect combination of transport capacity and state-of-the-art crane technology. An excellent choice for companies that expect maximum performance, reliability, and efficiency. For further information or to arrange a viewing appointment, please do not hesitate to contact us. Follow us on Instagram: @geurtstrucks We speak German We speak English Hablamos Español

Condition: new, Year of construction: 2026, Kündig Perfect-2 1350 RED-L – Like New – Only 10 Minutes of Use – Wide-belt sanding machine including version for intermediate sanding of coatings Special price for showroom machine – in-house exhibition machine – - Robust, space-saving W-type wide-belt sanding machine for the highest demands. - Constant working height thanks to adjustable headstock - Working width: 1350 mm - Top-grinding, with 2 sanding units - Grooved rubber contact roller in proven hardness - Contact roller level adjustable in stages according to a grit scale - Electric raising/lowering of the contact roller according to the selected unit - Electronically controlled segment sanding pad - Entire sanding pad unit adjustable by 10 degrees - Parallel spring-mounted, ground steel pressure roller at the infeed - Rubber-coated pressure roller between the sanding units and at the outfeed - 2 motors, 18.5 KW and 11 KW, 400 Volt, 50 Hz - Motor-driven fine adjustment of the height with digital display - Belt tension, control and oscillation pneumatically controlled Compressed air consumption approx. 2 l/min - Optimum safety thanks to automatic instant stop with disc brake in case of belt breakage, etc. - Workpiece feed 2.2 KW with transport belt and drive roller - Vacuum device for the entire work table with additional holes of over 200 mm for smaller workpieces - Automatic thickness adjustment over the entire working width - Workpiece over-thickness protection with feed instant stop and lifting mechanism - Infinitely adjustable chip removal rate - Electronic feed control on the control panel, infinitely adjustable from 3 - 15 m/min - PLC control with Teach-In memory - Pneumatic belt control - Workpiece support with roller at the infeed and outfeed - Enormatic: Fully automated quick setting and feed release - Eco energy-saving mode - Fault diagnosis - Passage height 210 mm up to 18.5 KW - Sanding belt dimensions 1350 x 2000 mm Perfect – Features: High-quality swiveling plexiglass control panel - 10-inch touch screen - Industry control - Automatic pressure regulation and storage of the sanding pad elements - Electronic compensation of the sanding belt grit size - Cycle counter and operating hour counter Coating equipment - Infinitely adjustable sanding belt speed on the 2nd unit - Spray nozzles for cleaning the sanding belt of the 2nd unit, controlled by the process - Electronic sanding pad with a segment width of 22 mm - Additional sanding pad insert Additional options included with the machine: Podok Dpp Sjpfx Af Sorb Fold-down outfeed table extension (without top) C10) LED package ASB5+AS3) ECS workpiece blowing system with fan Location: 54634 Bitburg - Available immediately -

Condition: new, mileage: 10 km, power: 129 kW (175.39 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, number of seats: 7, loading space length: 3,600 mm, loading space width: 2,010 mm, loading space height: 900 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, IVECO DAILY 35S * GVW. 3,500 kg. * EURO VI E * 8-speed automatic * ZV with FFB * Driver comfort seat / swivel seat * Radio with Bluetooth * Navi * Electr. power windows * Automatic air conditioning * LED headlights * LED daytime running lights * Electrically adjustable exterior mirrors * Roof shelf above the windshield * 90 l fuel tank * VDI interface for telematics system, ACC + traffic jam assistant * AEBS Emergency Brake Assist w. City Brake * Electronic parking brake 3-sided tipper: steel floor, hot-dip galvanized * Aluminum side walls 40 cm high * Leaf grate attachment approx. 50 cm high, swinging * Lifting and lowering via cable remote control * Lashing eyes in the floor * Interior dimensions approx. LxWxH 360x201x90 cm. Load securing is also available from us: * Tensioning and lashing straps * Locking beams * Warning vests * Transport boxes * Edge protectors * Dunnage bags * Wheel stoppers * etc. Financing and leasing possible We manufacture bodies of any size and type on any chassis. Tarpaulin, GRP sandwich, aluminum. Visit us at: Bodies - Complete vehicles - Trailers - Advice - Financing Prsdpsuqtzyjfx Af Sjb Subject to errors and prior sale, no liability for printing and input errors.

Condition: new, maximum load weight: 27,890 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,730 mm, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Brand new 3-axle Knapen SANH sliding floor trailer * BPW 9-tonne ECO Air HD rigid axle with disc brakes 430, 10-bolt, offset 120 * TireCheck tire pressure monitoring system * Smart Board * 1st axle: lift axle including starting aid * Steel rims with rim size 22.5" x 11.75 * Krone TRUSTED KT 231 385/65R22.5 164J 3PMSF tires * Gearbox-supported winch with thrust compensation * Swinging mud flaps * Plastic tool box 1000x500x500mm * 28 L water tank with soap dispenser * Long aluminum ladder * Extendable stairs with platform at the rear of the trailer * Broom and shovel holder, CARGOFLOOR CF-500 SL-C system, electronic operation * Diamond-patterned aluminum floorboards, 10 mm, 21 boards * Wear plates at the ends of the floor profiles, 350 x 3 mm * Stainless steel plate at the rear under the floor * Platform on the front wall with ladder * Moving bulkhead * Rear doors with external locking bars, one locking bar per rear door * Foldable "A" sign on the left rear door * Tarpaulin with side straps and tensioning ratchets under the trailer * Fixed side on the right, overhang on the left approx. 400 mm * Tarpaulin 900 gr./m2 * 3-position tarpaulin supports (4 pieces) * Side wall protection tarpaulin mounted in the keder on the left side wall, including fixed roll-up mechanism at the front, color: dust gray, RAL 7037 * 2 ECOLED III rear lights, completely LED * LED side marker lights flash simultaneously with the turn signal * 3 pairs of additional work lights * Acoustic reversing warning * Remote control for floor, lift axle, and work lights * Hydraulic connections on the front wall and at the kingpin supports * Air connection 7.2 mm, "workshop connection" Prjdpfx Aoz Ab Thef Seb * Tarpaulin similar to RAL 9006 WHITE ALUMINUM * Body RAL 7011 IRON GRAY * Chassis galvanized, not painted * A-frame painted in RAL 7011 IRON GRAY * Also available as a rental vehicle Inquire about our attractive financing options.

Year of construction: 2026, condition: new, The VPR-3500 vacuum membrane press is a universal press for woodworking and thermoforming. The VPR-3500 press is also swivelable and mobile. Possible applications: Veneering / Form bonding / Encasing… Prsdpfx Ajd Ecc Tjf Sob Coating of various profiles (veneer, paper, plastic…). Wood bending: Production of curved and laminated components. Vacuum system: Work surface with vacuum channels for uniform negative pressure, even with large workpieces. Becker vacuum pump / Oil-free / Tank capacity 100 l Work area: 3500x1500mm Pump power: 0.75 kW Vacuum pump flow rate: 40 m3/h Rubber membrane External dimensions: 3600 x 1650 x 1000 mm Weight: 400 kg Location: Available ex warehouse, 54634 Bitburg - Free loading -

Condition: like new (used), Year of construction: 2026, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 1 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg Predetnz Ttopfx Af Ssb

Condition: ready for operation (used), Fanuc SP-6 Spindle Servo Unit A06B-6041-H106, rack SN: KOY-01759 - without fan, used, in good condition, 100% functional, scope of delivery as shown in the photos. Prodpfey Np Txox Af Seb

Condition: new, empty load weight: 6,020 kg, maximum load weight: 27,980 kg, overall weight: 34,000 kg, axle configuration: 3 axles, loading space volume: 25 m³, suspension: air, tire size: 385/65 R 22,5, tire condition: 100 %, Equipment: ABS, Schwarzmüller K-Series 3-axle steel segment tipper | Volume: approx. 25 m³ | ABS / EBS | 9t SAF axles with disc brakes | Full air suspension | External tailgate | Tyres: 385/65 R 22.5 | Steel round body 7,650mm x 1,470mm | Floor made of 5mm HB 450 | Side walls made of 4mm HB 450 | Front platform | Unladen weight: 6,020 kg | Rolling tarpaulin | Subject to errors, input mistakes, and prior sale. Pjdsywywkspfx Af Serb

Condition: new, The devices from the AL-KO POWER VAC series are used wherever high suction power and a large air volume flow are required. Typical applications include chip extraction from saws in window manufacturing or direct extraction of milling chips on multi-head welding machines. Functionality: A negative pressure of up to 10,000 Pa enables quick and safe extraction of chips and dust directly at the source. This ensures smooth production processes and consistently high product quality. The looped filters provide a high separation efficiency for both coarse particles and fine dust. It is also possible to connect a ductwork system to link multiple processing machines to the extraction unit. AL-KO POWER VAC devices are equipped with the proven AL-KO OPTI JET filter cleaning system and come standard with a control system featuring an integrated frequency inverter. This allows extraction performance to be adjusted at any time to meet operational requirements. Pjdpfx Aswwt E Uef Serb Applications: - Cleaning suction of floors, machinery, and workstations in industrial and craft settings - Extraction from hand-held processing machines during grinding, milling, sawing, and deburring - Collecting dry dust up to dust class ST1, direct extraction from small processing and work machines Advantages: - High suction performance up to 10,000 Pa negative pressure - Optimal filter cleaning with jet pulse cleaning (AL-KO OPTI-JET®) - CLEAN dust barrier for improved cleanliness and health protection - Compact, modular design for minimal space requirements - Energy savings with standard frequency inverter for precise adjustment of extraction performance - Low operating noise – integrated silencer and sound-absorbing elements enable installation directly in the work area

Condition: used, mileage: 135,996 km, power: 110 kW (149.56 HP), first registration: 04/2001, overall weight: 9,500 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: mechanical, emission class: euro3, Year of construction: 2000, Equipment: ABS, air conditioning, all wheel drive, Equipment: - Split-range gearbox with work groups - Towing jaw coupling (Maul-AHK) with full brake system - Tipping cylinder - Engine-driven PTO including front PTO - Driver’s suspension seat - Double passenger bench seat Prodpert Aypefx Af Ssb - Rear cab window - Rotating beacons - Additional work lights Municipal specification: - Front mounting plate, size 3 - Two-circuit hydraulic system - 4-cell hydraulic system - Separate return line at rear - Snowplough relief function - Hydraulic connector sockets: - Front: four-pole cell 1+2+3+4 - Rear: four-pole cell 2+3 - Prepared for high-performance hydraulics - Pressure and separate return line midships on 2nd circuit - Front pressure line for 2nd hydraulic circuit Miscellaneous: - First delivered in Germany - 2 previous owners - 3,770 kg payload according to registration - Downgrade to 7,500 kg possible Since 1972, your reliable partner for automobiles and commercial vehicles in 28832 Achim at the Bremer Kreuz. NutzfahrzeugZentrum Behnke always stocks around 200 vehicles in the areas of vans, commercial vehicles, and construction machinery! We continuously offer attractive financing solutions with favorable special rates. Please contact us for a tailored quotation! Trade-in of your commercial vehicle or construction equipment is welcome. If a new TÜV inspection is desired, we are happy to provide a quote from our partner workshops. Our offers are generally WITHOUT new TÜV inspection. Delivery of your 'new' commercial vehicle can be arranged through our external partners for an additional fee. The information provided in advertisements, online listings, price tags, and images are non-binding descriptions and do not constitute guaranteed properties. The seller assumes no liability or warranty for typographical and data transmission errors. Listed equipment may need to be checked separately. Subject to prior sale and errors.

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,715 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Vehicle information ? Length: 13,860 mm ? Height: 4,000 mm ? ? width: 2,550 mm ? Load compartment length (inside): 13,620 mm ? Load compartment height (inside): 2,715 mm ? Load-through height in the rear portal: 2,630 mm ? Load compartment width (inside): 2,480 mm ? Semi-mounted height: 1,150 mm ? Permissible total weight: 36,000 kg ? Unladen weight: 7,200 kg _____ Axles ? Krone axles with disc brakes ? Tire brand: No brand 385/65 R22.5 ? 1st axle Lift axle ? ABS ? ? Air suspension ? ? steel rims ? Mechanical supports ? Knorr brake position ? Wheel chocks _____ Body / add-on parts ? Side collision protection Open ? Tail lift, make: BÄR vertical, load capacity: 2000 KG ? Platform of the tail lift at full height ? with 2-fold roll-off protection ? Battery supply via SmartCharge (7-pin) ? 1 toolbox ? 2 row(s) of horizontally recessed slot-and-hole lashing rails ? Attachment: Height center 1st lashing row above floor 800 mm ? Attachment: Height center 2nd lashing row above floor 1600 mm _____ Floor ? 30 mm thick waterproof panel floor ? Floor loads of up to 7,000 kg forklift axle load Psdpfxolxwr Io Af Sorb ? Premium visual sealing ? 13 pairs of lashing rings embedded in the floor ? Forklift collision protection inside on front wall, approx. 250 mm high _____ Lighting / electrics ? Side marker lights (flashing function) ? 2 LED license plate lights ? 2 clearance lights with rubber arm, LED version ? Lighting carrier designed for tail lift operation ? 3-chamber tail lights ? 6 LED ceiling lights _____ Paintwork ? Chassis: RAL 9005 - deep black ? Body: RAL 9010 - pure white ? Axle hub: RAL 9005 - jet black ? Rims SILVERNATUR ? Load securing certificate in accordance with EN 12642 Code XL ? Certificate for load securing according to Daimler guideline 9.5 ? Certificate for load securing for beverage transportation (VDI 2700 Bl. 12) ? ADR approval certificate EX/II without FL, AT, MEMU

Condition: new, power: 129 kW (175.39 HP), fuel type: diesel, gearing type: mechanical, overall weight: 7,200 kg, loading space length: 6,700 mm, loading space width: 2,400 mm, color: yellow, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, ---- IMMEDIATELY AVAILABLE !!!---- IVECO DAILY 70C18H/P Payload approx. 2880kg * German papers * Without registration * 2 years factory warranty from Iveco * GVW. 7200 kg * EURO VI E * PTO original from Iveco only possible in combination with a manual gearbox! * Air suspension ex works on rear axle * Hydraulically suspended driver's seat * ZV with FFB * Radio with Bluetooth * Multifunction leather steering wheel * Electr. Power windows * Electrically adjustable exterior mirrors Sliding plateau: Podouk T Exjpfx Af Serb * ALURAHMEN * Sliding platform hydraulically driven via remote control or manually via control lever * Hydraulic cable winch with radio remote control * Side underride guard painted in body color * LED light bar * Storage boxes * Mudguards with mud flaps * Trailer coupling with 3300 kg towing capacity Load securing is also available from us: * Tensioning and lashing straps * Locking beams * Warning vests * Transport boxes * Edge protectors * Dunnage bags * Wheel stoppers * etc. Financing and leasing possible We manufacture bodies of any size and type on any chassis. Tarpaulin, GRP sandwich, aluminum. visit us at: Bodies - Complete vehicles - Trailers - Advice - Financing Subject to errors and prior sale, no liability for printing and input errors.

Condition: used, mileage: 135,996 km, power: 110 kW (149.56 HP), first registration: 04/2001, overall weight: 9,500 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: mechanical, emission class: euro3, Year of construction: 2000, Equipment: ABS, air conditioning, all wheel drive, Equipment: - Split gearbox with work ranges - Piton-fix trailer hitch with continuous braking system - Tipping cylinder - Engine-driven PTO including front PTO - Driver's suspension seat - Dual passenger bench seat - Rear window - Rotating beacons - Additional work lights Municipal Equipment: - Front mounting plate, size 3 - Dual-circuit hydraulic system - 4-cell hydraulic system - Separate return line at the rear - Snow plow relief - Hydraulic connector couplings: - Front: 4-way cell 1+2+3+4 - Rear: 4-way cell 2+3 - Pre-installation for high performance hydraulics - Pressure line + separate return line, center 2nd circuit - Pressure line front for 2nd hydraulic circuit Miscellaneous: - First delivered in Germany - 2 previous owners - 3,770 kg payload according to registration certificate - Downrating to 7,500 kg possible Prsdpfx Ajt Ex Uuef Sjb Since 1972, your reliable partner for cars and commercial vehicles in 28832 Achim at Bremer Kreuz. NutzfahrzeugZentrum Behnke always has around 200 vehicles in stock, including vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options at special rates. If interested, we will gladly provide you with an individual offer! Trade-in of your commercial vehicle/construction machine is desired. If a new TÜV inspection is required, we can offer this through our partner workshops. Our offer generally does NOT include a new TÜV inspection. Delivery of your "new" commercial vehicle can be arranged by our external partners for an additional charge. The information provided in advertisements, on the internet, on price tags, and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability or warranty for errors in typing or data transmission. Listed equipment must be verified separately if needed. Subject to errors and prior sale.

Year of construction: 2019, condition: like new (used), machine/vehicle number: AT4-F 32x16/32x16 - wetterfest, Equipment: cooling unit, - what is the air volume for recirculated air – 8 687 m3 - air volume for fresh air – 2,3 m3/s - cooling capacity – 61 kW - heating capacity – 22 kW Pedpfjxvdi Sox Af Serb - is there humidification / dehumidification available NO - what are dimensions of the unit - 5x1,5x2,8 m / 4000 kg

Condition: new, Year of construction: 2025, Martin T 45 thickness planer with Tersa cutterblock Accessories: 7,5 KW The T45 thickness planer offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg Psdpfoqlclbex Af Sjrb - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -