Used 8 Die - 8 Blow Transfer Header for sale (41,697)

Condition: new, Year of construction: 2026, Aluminum incline conveyor with substructure including leveling feet and machine feet for compensating uneven floors - Feed height: 500 mm - Inclined section: 2,000 mm - Discharge height: 1,200 mm Nedpfoyhzhbex Ab Asdc Design: Aluminum structural construction - Triple-reinforced profile 135x45 mm - Continuous removal plate 2.0 mm galvanized Drive roller + return roller made from S235 steel, welded and machined Ø150x620 mm crowned, shaft fixed with pillow block bearings. Drive: Mounted gear motor 1.10 kW, belt speed 0.77 m/sec Connection 230/400V, 50Hz, protection class IP54 Drive pre-wired up to the motor terminal box (Commissioning must be carried out by qualified electrical personnel) PVC conveyor belt DM 10/2 0+005 PVC green Belt width: 600 mm endless high-frequency welded with stepped joint Belt material: 2-ply, especially cross-stable 2 pcs wave edge profiles, 80 mm high, 50 mm wide, high-frequency welded flush with the belt edge 14 pcs T60 cleats, 400 mm long, pitch approx. 296 mm, center-mounted Belt material: 2-ply, especially cross-stable Due to the wave profiles on both sides, the usable belt width is reduced: Usable width 500 mm, calculated as follows: (Top view) Crosswise arrangement 50+500+50 mm

Condition: new, Year of construction: 2026, Aluminum angled conveyor with substructure Including adjustable feet as well as machine feet for leveling uneven surfaces Horizontal section: 3,500 mm Inclined section: 2,100 mm Inclination angle at bend: 45° Total conveyor length measured on the floor: 5,000 mm Discharge height: 2,000 mm Height of horizontal section: 500 mm Design: Aluminum structural construction - Triple-reinforced profile 135x45 mm - Full-surface discharge sheet 2.0 mm, galvanized Drive drum + tail drum made from S235 steel, welded and machined Ø150x820 mm, crowned, shaft mounted in plummer blocks. Nsdpfx Aboyhzhuj Asdc Drive: Shaft-mounted gear motor 1.1 kW, belt speed 0.77 m/sec Connection 230/400V, 50Hz, protection class IP54 Drive prewired to motor terminal box (Commissioning must be performed by qualified electricians) PVC conveyor belt DM 15/4 0+007 PVC including PVC wave edge, green Belt width: 800 mm 2 pcs. wave edges, 80 mm high, 50 mm wide, high-frequency welded 32 pcs. T-50 cleats, approx. 355 mm spacing Belt material: 2-ply, especially cross-stable At the bend, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on each side. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 490 mm, calculated as follows: (top view) transverse arrangement 100+50+5+490+5+50+100 mm Discover custom solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailored solutions for the recycling, food, and processing industries. Our extensive product portfolio ranges from conveyor systems and flat conveyors to incline conveyors, angled conveyors, and Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnetic separators, drum magnetic separators, and dosing bunkers – all according to our customers’ specific requirements. We understand that every industry and project is unique. That’s why we customize our solutions to your individual needs and specifications. Complex projects are an exciting challenge for us, and we look forward to working with you to develop innovative solutions. With us, there is no such thing as a special solution – we find the right solution for every problem! Challenge us! Contact us and discover how we can transform your requirements into customized solutions. Together, we will shape the future of your production processes! Conveyor, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grate, metal separator, block magnet, filter systems, dosing bunker, feed bunker, filling systems

Year of construction: 2026, condition: new, DM Flat Conveyor Belt Type FB-700 without substructure Njdpeyhznhefx Ab Asdc for bulk material conveying Conveyor belt length: 6,000 mm Belt width: 650 mm Fabricated from structural steel, laser-cut, bent, and welded Base frame powder-coated in RAL 5015 Modular conveyor belt frame construction / sections available in transportable lengths. Frame structure extendable or can be shortened at any time. Carrier roller system on the return strand, shaft Ø60/15 mm Roller station spacing approx. 500 mm (custom options possible) Closer roller spacing in load area Drive drum + tail drum made of S235 steel, welded and machined Ø220x700 mm crowned, shaft fixed with pillow block bearings. Drive: Hydromec worm gear motor 1.1 kW, belt speed 1.15 m/sec Connection 400 V, 50 Hz, protection class IP54 Drive supplied prewired to motor terminal box (Commissioning must be performed by a qualified electrician) Motor mounted on right side in direction of transport, pull configuration. Bearing points equipped with robust UCF flange bearings incl. grease nipples. Rubber conveyor belt DM EP250/2 3+1.5 cover Chevron profile, 17 mm high x 650 mm wide Joint section without profile, endlessly hot vulcanized

Condition: new, Year of construction: 2026, Aluminum Incline Conveyor with Substructure (PU/PVC with Cleats & Corrugated Sidewalls) We offer a robust incline conveyor in aluminum construction design for the reliable transport of piece and bulk materials—ideal for industry, trade, recycling, woodworking, and much more. Thanks to cleats and corrugated sidewalls, secure material transport is ensured even on steep conveyor routes. _____ Technical Data (Sample Configuration): ✔ Infeed height: customisable ✔ Inclined section: length freely selectable ✔ Discharge height: customisable ✔ Substructure with adjustable leveling feet & machinery feet or with transport castors → for compensating uneven surfaces / stable positioning _____ Design / Frame: ✔ Aluminum construction profile ✔ Double profile 90x45 mm or reinforced triple profile 135×45 mm ✔ Continuous wear plate 2.0 mm galvanized or 1.4301 stainless steel (VA) _____ Rollers / Drive: ✔ Drive and deflection rollers made from S235 steel, welded & machined ✔ Diameters: Ø100, 150 or 220 mm ✔ Shafts fixed with pillow block bearings ✔ Drive: shaft-mounted geared motor 0.18 – 3.0 kW ✔ Belt speed: individually adjustable ✔ Connection: 230/400V, 50Hz, IP54 protection class (standard) ✔ Drive prewired up to the motor terminal box ➡️ Commissioning must be carried out by a qualified electrician _____ Conveyor Belt / Cleats: ✔ PVC conveyor belt DM 10/2 0+005 PVC green Ndjdpjyhzplsfx Ab Aoc ✔ Belt widths: 100, 200, 300, 400, 500, 600, 700, 800, 900, or 1,000 mm ✔ Endless high-frequency welded (stepped joint) ✔ 2-ply, 3-ply with extra lateral stability ✔ Corrugated sidewalls: up to 80 mm high ✔ Cleats: customizable ✔ Pitch customizable _____ Options / Accessories Available: ✔ Infeed plates ✔ Hoppers / infeed hoppers ✔ Bunkers / loading bunkers ✔ Discharge hoppers ✔ Special lengths / special widths ✔ Cleats & corrugated sidewalls as required _____ ✔ Custom solutions made to your specifications ✔ Industrial quality ‘Made in Germany’ Dimensions, versions, and pricing on request Simply reach out—we provide fast and straightforward advice. Discover tailored solutions for your industry! As an innovative mechanical engineering company, we are proud to offer bespoke solutions for the recycling, food, and processing industries. Our comprehensive product portfolio covers everything from conveyor systems and flat belt conveyors to incline conveyors, angle conveyors, and Z-conveyors. In addition, we manufacture loading bunkers, magnetic separators, overband magnetic separators, drum magnetic separators, and dosing bunkers—all tailored to meet our customers’ specific requirements. We understand that every industry and every project is unique, which is why we tailor our solutions precisely to your needs and specifications. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. With us, there are no off-the-shelf solutions—every problem gets the right answer! Challenge us! Contact us and discover how we can turn your requirements into custom solutions. Together, we will shape the future of your production processes!

Condition: used, For inquiries regarding the vibratory plate compactor, Mr. Herden is available to assist you by phone. Weber CR 6 WSA Hatz Diesel Vibratory Plate / Electric Start / Brand New / In Stock & Immediately Available Sales Price: €8,990.00 net / €10,698.10 gross 3-Year Manufacturer Warranty Technical Data Engine: Hatz Diesel Max. engine output: 7.9 kW (10.7 HP) Weight: 428 kg Ndedpfx Asykhu Nsb Ajc Centrifugal force: 55 kN Frequency: 72 Hz Working width: 59 cm Weber Smart Assist (WSA) - Evaluates signals from the sensors installed in the machine and displays them graphically using symbols - Similar to the previous engine protection from Weber MT, the engine shuts off whenever engine damage would be expected if operation continued - The user is also shown via symbols how to resolve any indicated faults - For a heavily soiled air filter, the cleaning and replacement procedure for the filter element is explained step by step - Weber Smart Assist also includes the COMPATROL compaction control, now presented with a new design - It provides the user with an easy-to-read and clearly understood bar graph display of the compaction progress - The machine operation is also new: once started, vibration is activated at the push of a button - There is no throttle lever, as the engine automatically adjusts to the correct speed The reversible soil compactors of the CR series stand out for their high compaction performance and top efficiency. They are the first choice for compaction work in classic road and civil engineering applications as well as paving. Balanced running properties, high smoothness, and low hand-arm vibrations ensure high operating comfort. CR 6 – Economical machine with strong compaction performance: - Infinitely variable forward and reverse travel. Hydraulic direction change - Throttle cable and hydraulic direction change are routed protected inside the guide bar - Low hand-arm vibrations - Fatigue-free operation with the height-adjustable guide handle - Protection for machine and engine through the engine guard frame and engine cover - Reduced maintenance effort thanks to the self-tensioning centrifugal clutch - Easy servicing, as all maintenance points are easily accessible - Safe and fast loading thanks to the large, foldable lifting eye - Secure lashing for transport with additional lashing eyes on the engine console - Enhanced operator convenience with electric start - Areas of application: road and civil engineering, paving, and thanks to its low height and working width, the CR 6 is also ideal for trench shoring We have a very large selection of different vibratory plates in stock and immediately available! Mr. Herden is happy to assist you by phone. On request, we can also provide you with a financing offer. We are an official Weber MT sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are...

Condition: new, Year of construction: 2025, functionality: fully functional, Aluminum inclined conveyor belt with substructure including adjustable feet and machine feet to level uneven ground. - Feed height: 250 mm - Ascending section: 2,500 mm - Discharge height: 1,800 mm Design: Nodov Suvfopfx Ab Aodc Aluminum construction - Double reinforced profile 90 x 45 mm - Full-surface removal plate Drive roller + idler roller made of S235 steel, welded and machined Ø100 x 520 mm, crowned, shaft secured with clamping bearings. Drive: 0.55 kW slip-on gear motor, speed 0.3-0.5 m/sec Connection: 230/400 V, 50 Hz, protection class: IP54 Drive ready for connection to the motor terminal box (Commissioning must be carried out by a qualified electrician) Polyurethane conveyor belt DM 15/2 0+005 PU including sidewalls and cleats, PU industrial belt, matte petrol Conveyor belt width: 500 mm 2 sidewalls, 50 mm high, 25 mm wide, flush with the edges, high-frequency welded Belt material: 2-ply, particularly stable laterally 17 T40 cleats welded centrally, pitch approx. 300 mm Due to the sidewalls on both sides, the usable width of the conveyor belt is reduced: Usable width 450 mm, calculated as follows: (Top view) Transverse arrangement 25+450+25mm We always have various systems of this type in stock. The delivery time for a customized system is currently approximately 3-4 weeks, depending on the production effort. Our core competence lies in providing customers with exactly what they need. We work with our customers to develop customized, individual solutions and supply corresponding systems from our own production facilities. Please feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyors, magnetic separators, overband magnetic separators, recycling, wood chips, plastic, metal-free metal detection, neodymium, overband magnet, magnetic belt separator All prices are net prices plus 19% VAT. All information is subject to change without notice, only while stocks last!

Condition: new, Year of construction: 2025, functionality: fully functional, Aluminum inclined conveyor belt with substructure including adjustable feet and machine feet to level uneven ground. - Feed height: 300 mm - Ascending section: 4,500 mm - Discharge height: 3,000 mm Design: Aluminum construction - Double reinforced profile 90 x 45 mm - Full-surface removal plate Drive roller + idler roller made of S235 steel, welded and machined Ø100 x 520 mm, crowned, shaft secured with clamping bearings. Drive: 0.55 kW slip-on gear motor, speed 0.3-0.5 m/sec Connection: 230/400 V, 50 Hz, protection class: IP54 Drive ready for connection to the motor terminal box (Commissioning must be carried out by a qualified electrician) Polyurethane conveyor belt DM 15/2 0+005 PU including sidewalls and cleats, PU industrial belt, matte petrol Conveyor belt width: 500 mm 2 sidewalls, 50 mm high, 25 mm wide, flush with the edges, high-frequency welded Belt material: 2-ply, particularly stable laterally 23 T40 cleats welded centrally, pitch approx. 400 mm Due to the sidewalls on both sides, the usable width of the conveyor belt is reduced: Usable width 450 mm, calculated as follows: (Top view) Transverse arrangement 25+450+25mm We always have various systems of this type in stock. The delivery time for a customized system is currently approximately 3-4 weeks, depending on the production effort. Our core competence lies in providing customers with exactly what they need. We work with our customers to develop customized, individual solutions and supply corresponding systems from our own production facilities. Please feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyors, magnetic separators, overband magnetic separators, recycling, wood chips, plastic, metal-free metal detection, neodymium, overband magnet, magnetic belt separator All prices are net prices plus 19% VAT. All information is subject to change without notice, only while stocks last! Nsdpfjv Su Stox Ab Ajdc

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: WKZ45-1030, CLEARANCE SALE, STOCK MACHINE! We invite you to visit our technical center to experience the quality and functionality for yourself. Material Shredder 45KW Hopper opening: 1,030 x 1,235 mm Rotor diameter: 360 mm Star-delta start, automatic shut-off during idle - Hydraulic pusher equipped with pressure plates - Siemens PLC control - Optionally with control cabinet extension for discharge conveyor belt and overband magnetic separator Complete solution with discharge conveyor belt in any configuration. Nsdpfx Absv Tdq Ie Aodc Our core competence lies in delivering exactly what the customer truly needs. We work together with our customers to develop customized, individual solutions and supply corresponding systems from our own production. Please feel free to contact us by phone to find the right solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separators, overband magnetic separators, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grate, metal separator, block magnet, filter systems All prices are net prices plus 19% VAT All information provided without guarantee, while stocks last!

Condition: excellent (used), functionality: fully functional, 8 large, high-power DEMAG travel drives complete with gearbox and travel wheel / DRS wheel block for crane bridge From large DEMAG spare parts stock, see also my other offers Low hours, very good condition, offered due to dismantling of factory hall Motor: ZBF100 A4 B050 Gearbox: ADK70 QD Wheel: DRS 315 (manufacturer's new price approx. €3,000.00 net per unit) Price: €4,490.00 each, complete Nedpfx Aev T Tf Ujb Ajdc For purchase of 8 units: €3,490.00 each net Info: We have over 20,000 DEMAG items in stock! Check my other offers from stock as well!

Condition: used, Year of construction: 2013, operating hours: 748 h, lifting height: 3,310 mm, motor manufacturer: Hybrid (Benzin/Elektro), Hubtex MQ 30 H (3060) Multidirectional Sideloader, year of manufacture: 2013, operating hours: only 748 h! Previous owner: German military (Bundeswehr). New battery as of 03/2022. Hybrid: possible to run on either diesel or electric power. Rated load capacity: 3,000 kg, load center: 700 mm, lift height: 3,310 mm, with cabin. Diesel engine rated power: 44.7 kW / 61 HP, electric motor rated power: 23 kW / 31 HP. Weight: approx. 10,000 kg, including charger. In very good condition! Immediately ready for operation. Ndedsyxktxepfx Ab Aoc We are happy to provide a leasing or financing offer upon request. Mr. Ebert (Tel.) will be pleased to assist you. For more information, please visit our website. Errors and prior sale excepted. Rental possible = Additional information = Lifting capacity: 3,000 kg Please contact Tobias Ebert for further details.

Condition: used, functionality: fully functional, machine/vehicle number: 2482688, Year of construction: 2021, load capacity: 1,800 kg, lifting height: 4,700 mm, free lift: 1,585 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, construction height: 2,170 mm, power: 32.8 kW (44.60 HP), motor manufacturer: Yanmar, fork carriage width: 1,000 mm, fork length: 11,150 mm, fork width: 100 mm, fork thickness: 35 mm, turning radius (inner): 55 mm, turning radius (outer): 2,010 mm, front tire size: 6.50-10 10, rear tire size: 5.00-8 8, overall weight: 3,100 kg, total height: 2,090 mm, total length: 3,350 mm, total width: 1,080 mm, color: red, fuel: diesel, Equipment: UVV, cabin, pallet forks, Technical data Year of manufacture: 2021 Engine: Diesel Njdpfoyxmg Isx Ab Ajdc Drive: 2WD Lifting height: 4.70 m Overall dimensions (L x W x H): 3.35 m x 1.08 m x 2.09 m Max. load capacity: 1800 kg Max. gradeability: 20% Turning radius: 2.01 m Fully functional, general signs of use, UVV, Triplex mast TLL47 with free lift, Drive 2WD, full cab

Condition: used, functionality: fully functional, Year of construction: 2020, machine/vehicle number: 2473918, power: 44.5 kW (60.50 HP), load capacity: 227 kg, mast type: telescopic, lifting height: 19,380 mm, platform length: 1,830 mm, platform width: 910 mm, overall weight: 10,200 kg, transport length: 9,140 mm, transport width: 2,440 mm, transport height: 2,540 mm, fuel type: diesel, tire size: 10,5x17,5, color: red, Equipment: all wheel drive, differential lock, Technical data: Year of manufacture: 2020 Working height: 21.38 m Platform height: 19.38 m Lateral outreach: 12.19 m Up-and-over clearance: 8.38 m Slewing range: 360° Basket arm length: 1.68 m Platform dimensions (L x W): 1.83 x 0.91 m Overall dimensions (L x W x H): 9.14 m x 2.44 m x 2.54 m Ndedpfx Ajyylf Esb Aoc Load capacity: 227 kg Total weight: 10,200 kg Drive: Diesel 44.5 kW/60 HP Climbing ability: 45% Platform rotation: 170° Foam-filled off-road tyres All-wheel drive, differential lock, overload sensors, fully functional, general signs of wear

Condition: good (used), 8-position tool turret, manually indexable, for retrofitting 8 x turning tool holders 8 x drilling tool holders Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 Ndjdpfswg Rv Njx Ab Ajc DE – 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1964, controller manufacturer: Siemens, controller model: SIMATIC HMI TP700 / KP400, _____ Description: Year of manuf. : 1964 Control : Siemens SIMATIC HMI TP700 / KP400 Grinding width : 203 mm General: Year of manufacture:1964, fully overhauled in 2015 (Huttelmaier) Weights:Total weight of the unit approx. 8,025 :kg Footprint:approx. 6,000 x 4,085 mm Grinding unit: Process:Centreless cylindrical grinding Grinding wheel:Ø 380–508 mm, width 25–203 mm, bore Dressing wheel:Ø 247–330 mm, width 25–203 mm, bore Wheel material:Corundum Dressing:Dressers for grinding and regulating wheels, Balancing:MPM BM50 automatic balancing system Ndjdpfx Ajz Rtqtsb Aoc Feed:Motorised feed axis INK increments:0.001 / 0.005 / 0.010 / 0.100 mm Controls: Control system:Siemens SIMATIC, retrofitted in 2015 Front-panel operation:SIMATIC HMI TP700 touch panel Rear-panel operation:SIMATIC HMI KP400 control panel Operating modes:Automatic, Manual :Through-feed/plunge grinding: :Key switch on the control panel Menu pages:Dresser, grinding wheel and control wheel Plant engineering: Parts feeding:Feeding conveyor with two-hand operation Discharge:Frasch FP66N-zw belt conveyor, :Rotary table (Semotec) for finished parts Coolant lubrication:POLO Filtertechnik unit Chip management:Extraction system, switchable via auxiliary units Hydraulics:Nold Hydraulik und Pneumatik hydraulic power unit Lubrication:Central lubrication unit with :level indicator Interface:Feeding system for plunge cutting

Condition: used, Year of construction: 2005, Overview NATE PETBLOK 30/60/8 rinser-filler-capper monoblock for PET bottles, built in 2005 in the Czech Republic. Counter-pressure filling for carbonated soft drinks and sparkling water, also used for still water and other non-carbonated beverages. Output up to 11,000 bottles/h on 1.5 L PET. The machine is still installed, under power and in production. Technical data - Manufacturer: NATE (Czech Republic) - Model: PETBLOK 30/60/8 - Year: 2005 - Output: up to 11,000 bottles/h (1.5 L PET) - Bottle formats: 0.33 L, 0.5 L, 0.85 L, 1.0 L, 1.5 L and 2.0 L PET - Neck finish: PCO 1881 (short neck) - Products: carbonated soft drinks, carbonated and still water, non-carbonated beverages Equipment - Rinser, counter-pressure filler and capper in one monoblock - Bottle infeed with feed screw and neck-handling starwheels - Cap elevator with chute to the capper - Operator panel Siemens SIMATIC Multi Panel - Full guarding with doors Condition Used, in good working condition, installed and running in production. The machine can be seen in operation before dismantling. Ndsdpfxsz R Ulme Ab Aec Availability In production until 23 December 2026, ready for pickup from January 2027. Location: Serbia.

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 total power requirement: 83,0 kW weight of the machine ca.: 17,0 t space requirement of the machine approx.: LxBxH: 5,0 x 6,2 x 3,8 m dimensions of machine: LxBxH: 2400x2800x2800 mm dimensions electric cabinet: Nr.1: LxBxH: 1000x850x2350 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x650x2230 mm dimensions electric cabinet: Nr.3: LxB.H: 650x600x2300 mm dimensions electric cabinet: Nr.4: LxBxH: 1300x650x2350 mm TRANSFER MACHINE with 3 work station and 15 drill & mill spindles - for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, clock cycle of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - right 4x drill-& mill spindle with 18 stages and 1x thread cutting spindle hydr. 14 up to 224 U/min, left 4x drill and mill spindle with 18 stages and 1x thread cutting spindle hydr. from 14 up to 224 U/min such as radial 3x drill -and mill spindle from that 1x U-Axis and 1x thread cutting spindle 1.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left 2.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: Ndedpfx Aju Idxrsb Ajc - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. *

Condition: ready for operation (used), Mitsubishi monitor for Mazak Quick Turn 8 machine, used, in good condition, 100% functional, scope of supply as shown in the photos. Ndodpfx Abj Aa Hmfj Asc

Condition: used, BAVELLONI GEMY 8 - Year 2005 8-wheel straight-line edging machine Nedpfez R Nwwox Ab Aodc Glass thickness: 3 - 35 mm Minimum size: 35 mm Power: 19.5 kW Machine dimensions: 7.03 x 1.7 x 2.3 m Weight: 2710 kg

Condition: used, mileage: 39,278 km, power: 63 kW (85.66 HP), first registration: 10/1982, overall weight: 6,500 kg, fuel type: diesel, color: red, gearing type: mechanical, total width: 2,350 mm, total height: 2,750 mm, number of seats: 9, Beautiful LP 709, partially restored as a former LF8 and the case already emptied Njdpfx Asv Rt Tyeb Ajdc The integrated body offers the possibility of removing the partition wall and creating a continuous space between the driver's cabin and the equipment structure Ideal conditions, for example, for a spacious mobile home The body, the structure and all doors were professionally repaired by us and repainted, the front with window frame is still in its original, rust-free condition. fresh inspection with engine oil and brake fluid change, new fuel filter and lubrication upon delivery, new TÜV including H-approval and on request technical modification to truck we have already doubled the height of the rear underrun protection to comply with applicable regulations Current empty weight as shown approx. 3,750 kg Total permissible weight: 6,500 kg Vmax according to papers: 82 km/h Dimensions: Equipment compartment 2630 x 2200 x 1600 mm (LxWxH) Front cabin from driver's seat: 1450 x 2200 x 1560 (LxWxH) After removing the partition wall, a space of 4800 mm length is created behind the front seats +++ Errors, changes and prior sale reserved

Condition: used, mileage: 163,350 km, power: 220 kW (299.12 HP), first registration: 08/2022, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, next inspection (TÜV): 10/2027, color: white, gearing type: automatic, loading space volume: 45 m³, loading space length: 7,960 mm, loading space width: 2,460 mm, loading space height: 2,290 mm, Year of construction: 2022, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, tail-lift, ATEGO 1530 L box van, 8 m, with BÄR tail lift, 1.5 tons. * Permissible total weight 16,000 kg = payload approx. 8,510 kg * Vehicle number for customer inquiries: 4852 * Engine version Euro VI, E * Active Brake Assist * Differential lock, rear axle * Air conditioning * Middle seat, with 3-point seat belt * Lane Keeping Assist * Tail lift * Trailer coupling G 145, for ZAA (central towing hitch) * Trailer coupling Ringfeder * High Performance Engine Brake * Light sensor * Air suspension, rear axle * Air deflector, without base panel, lockable * Rain sensor Nodpfx Abe Adv Sre Asdc * Electronic Stability Program (ESP) * Auxiliary heater, hot air, 2000 W * Reversing camera * Airbag, driver * Trailer brake, 2-line * Trailer socket 24 V, 15-pole * Electronic braking system with ABS and ASR * Driver's comfort suspension seat * Window lift, electric, on both sides * Gearbox G 140-8/9.30-0.79 * Mercedes PowerShift 3 * Locking system, with central locking * Cruise control * AdBlue tank 35 l * ClassicSpace * Roof hatch/ventilation flap, roof * Weight variant 16.0 t (6.1/10.5) * Main mirror, electric, driver's side * Heater, electronic compressed air supply unit * Plastic tank 180 l, left * Engine OM936, R6, 7.7 l, 220 kW (299 hp), 1200 Nm * Cross member, retrofitting, trailer coupling G145 ZAA * Wheelbase 5360 mm * Tires tubeless, 305/70 R 19.5 front axle * Inline engine, 6 cylinders * Reversing warning * S-cab ClassicSpace, extended, 2.30 m, tunnel * Stabilizer, under frame, rear axle * Front spring, 6.1 t, parabolic * Preparation for toll collection * Snow chains Onspot * Tachograph digital, 2nd generation, ADR * Environmental badge (green) * Maintained according to service schedule * Three-seater No liability for printing and typographical errors Sales only to commercial customers Errors and prior sale excepted* Changes, prior sale and errors are expressly reserved. The description serves to identify the vehicle and does not constitute a guarantee in the legal sense. The description in the purchase contract is decisive. * TOP SERVICE + QUALITY * We would be happy to provide you with a LEASING-FINANCING-RENT-TO-OWN offer * Guarantee insurance possible on request from the insurance company * TÜV / UVV tail lift inspection / Tachograph test and installation of OBU device by our partners on site * Customs license plate for 30 days * All customs documents for export are possible, but must be requested individually * TOLL for Toll-Collect can be booked in-house * free transfer from Stuttgart Airport or Metzingen (Württemberg) train station * TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * * Alexander Pittas * Robin Pittas * WHATSAPP number * ---- Visit us on our website at * constantly over 200 vehicles in stock

Condition: excellent (used), The DAGE Series 4000 Bond Tester is a professional device designed for performing Bond Pull and Die Shear tests in the semiconductor and electronics industries. This device is used in quality control laboratories, research and development departments, and during the production of microelectronic components. This unit is equipped with a precision positioning table, joystick controls, a keypad panel, and work lighting. The set also includes the original PCI control card (Baldor NextMove PCI-2 Motion Control Card) and additional electronic components visible in the photos, which are a valuable addition to the set. Technical data: Manufacturer: DAGE (Nordson DAGE) Ndedpoz Snf Nsfx Ab Aoc Model: DAGE Series 4000 Bond Tester Year of manufacture: 2010 Power supply: 110 / 230 V AC, 1-phase Frequency: 50/60 Hz Power: 250 VA Control: joysticks and keypad Precision XY positioning table Required compressed air: 4 bar (oil-free) Vacuum connection Excellent visual condition. The set being sold is consistent with the presented photos and includes all visible components, including the additional PCI control card.

Condition: new, power: 140 kW (190.35 HP), fuel type: diesel, color: white, gearing type: automatic, number of seats: 30, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Vehicle in stock. Now with a modified body and 200 mm increased length for more legroom. School bus/transfer bus built on a Sprinter 907 chassis, model 519. A vehicle that may not win any design awards, but is 100% functional. It features a pleasant interior design and optimal use of space. Body made of fiberglass and sheet metal. Frame made of galvanized steel. Permissible total weight up to 6650 kg. Unladen weight 4350 kg Length 7800 mm Width 2280 mm Chassis with the following equipment: - Front air conditioning - Hot water auxiliary heater - Suspension seat with heating - Electric exterior mirrors - Radio with hands-free system - Multifunction steering wheel (adjustable in height and inclination) - Cruise control - Euro 6E engine - Automatic transmission, 519 engine, - MBUX multimedia system, 10 inches - LED and fog lights - Rear and front cameras - Panoramic windows, tinted, single-pane - 2 plus 2 seating arrangement - = 29 seats - + Tour guide seat --> Total seats including driver: 31 - Emergency exit door - Roof hatch/emergency exit hatch - Electric exterior swing door with recessed entrance at the front - Driver's door, original MB - Convector heater in the passenger compartment on the left and right (thermostatically controlled) - Climate control, Webasto - RIGA 12 kW plus front air conditioning MB 7 kW = Dual climate control Rear trunk Ndeds Adypnspfx Ab Aoc - Luggage racks on the left and right GSR 3 systems Optional: Price: Chassis 519, 129,990.00 Euro

Condition: used, mileage: 335,286 km, power: 120 kW (163.15 HP), first registration: 12/2016, fuel type: diesel, empty load weight: 1,985 kg, maximum load weight: 1,115 kg, overall weight: 3,100 kg, tire size: 205/65R16C, axle configuration: 4x2, wheelbase: 3,200 mm, fuel: diesel, energy efficiency: B, CO₂ emissions: 159 g/km, fuel consumption (urban): 7.5 l/100km, fuel consumption (extra-urban): 5.1 l/100km, fuel consumption (combined): 6 l/100km, brakes: other, color: red, driver cabin: other, gearing type: mechanical, emission class: euro6, number of seats: 8, total length: 5,140 mm, total width: 1,930 mm, total height: 1,890 mm, Year of construction: 2016, front tire size: 205/65R16C, rear tire size: 205/65R16C, Equipment: ABS, air conditioning, airbag, cabin, car registration, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, sliding door, soot filter, traction control, trailer coupling, * German vehicle * Condition, see photos * Long wheelbase version * 8 seats, two individual seats in the front and two three-seater benches in the back * Equipment line PRO * Increased permissible total weight to 3,100 kg * Trailer hitch: fixed ball head * Trailer load 2,000 kg * Air conditioning system (Tempmatik) * Hill start assist * Driving assistance system: Attention Assist (driver drowsiness detection) * Driving assistance system: Crosswind Assist * Power steering * Multifunction steering wheel including trip computer * Cruise control * Automatic activation of headlights * Brake assist * Electric windows, 2-way * Central locking with remote control * Airbags * Electronic Stability Program (ESP) * Braking system with ABS+ASR * Exterior mirrors, electrically adjustable and heated, both * Rear door with window * 6-speed transmission - TSG (Eco Gear) * Fuel tank: enlarged * Sliding door for the cargo/passenger compartment on the right with glazing * Daytime running lights * Tire pressure monitoring system * Heat-insulating glazing * Wheelbase 3200 mm * Permissible total weight 3,100 kg * Unladen weight 1,985 kg * Payload 1,115 kg If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV inspection, a new SP inspection, or a new UVV inspection. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend and offer a viewing and inspection of the goods so that the buyer does not have any false impressions about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired. Nedps Adr Upsfx Ab Aedc All information is without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to change, prior sale, and errors.

Condition: used, Year of construction: 1989, sheet length: 3.100sheet thickness: 8,0cutting area width: 3100total power requirements: 11weight approx.: 7500messurements (LxWxH): 4180 x 2150 x 2000 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut) Ndjdperu Un Hsfx Ab Aoc

Condition: used, Equipment: bathroom, lighting, 8 m office container / shipping container – with WC, storage & complete equipment – immediately available! ----- PRICE: €7,500 negotiable, ex works Dunkerque, France ----- BRIEF & TO THE POINT: ✅ Office, WC & storage in one container ✅ Fully equipped: heating, sink, high-voltage power supply, awning ✅ Immediately available – only 2 units available! ----- Ndedpfx As Adur Djb Ajc DETAILS & HIGHLIGHTS: We offer well-maintained 27FT office containers (8 m length) in very good condition – perfect as office containers, construction site containers, or storage containers. The containers come from the equipment of the French company CARGLASS and are of high-quality construction. All technical components are intact and ready for immediate use. The condition is guaranteed and documented in the invoice. Dimensions: 8m x 2.45m x 3.20m = 7t ----- Equipment overview: ✅ Separate WC with sink ✅ Office area with plenty of natural light ✅ Kitchenette with sink & hot water boiler ✅ Storage room ✅ Heating & air conditioning unit ✅ Electric awning 3x7 m with remote control ✅ High-voltage connection, electrical installation & exterior lighting ✅ Ramp & fire extinguisher ----- Special features: ✅ Practical room layout: office – WC – storage ✅ Original images – condition as shown ✅ Ideal as a construction site office, container office or mobile service point ✅ Technically sound, immediately ready for use ----- DELIVERY & AVAILABILITY: ✅ Delivery within a maximum of 2 weeks ✅ Delivery costs (excluding unloading): on request € ✅ Immediately available: 2 units ex works Dunkerque, France ----- Inquire and reserve now! We will gladly send you further photos, technical drawings and details on request. NAUTEXA GmbH