Used Werner Pfleiderer Hkl 1600 for sale (3,135)

Condition: good (used), Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks Ljdsyzxalopfx Afajrk -Forklift tines: 2 pieces/1 pair -Length: 1600 mm -Cross-section: 100 x 40 mm -Reception: 400 mm (see sketch in the photos) -Transport dimensions: 1750/590/H110 mm -Weight: 118 kg

Condition: good (used), Year of construction: 1964, Radial drilling machine make Raboma 12 UH 1600 MK with Morse taper mount, cube table, and many accessories Ledpoxcf Hfjfx Afajrk

Condition: new, stroke: max. 450daylight: max. 900motor power: 22performance of pump: 48oil filling: 120messurements (LxWxH): 3300x1250x2900weight approx.: ca. 4200Cylinder: Ø 360pressure: 400- Pressure adjustment via rotary controlMotorized control via hand leverManually adjustable sliding cylinderClear opening: 1600 × 550 mmStar-delta connection for motor driveHydraulic tank incl. motor is mounted on the lower side of the frame Options / surcharges: Pressure control valve: ¤400.00 Lodpfx Afeutuy Aeaerk Speed throttle valve: ¤400.00 Anti-rotation device for piston: ¤250.00 Handwheel for sliding cylinder: ¤950.00 Cylinder adjustable via geared motor: ¤1,700.00 Table support plate (1300 × 850 × 150 mm): ¤3,300.00 All images are for illustrative purposes only and are symbolic photos. The actual equipment may vary slightly.

Condition: new, Year of construction: 2026, functionality: fully functional, feed length X-axis: 1,300 mm, feed length Y-axis: 320 mm, feed length Z-axis: 450 mm, total height: 2,000 mm, total width: 2,100 mm, total length: 2,520 mm, table width: 360 mm, table length: 1,600 mm, type of input current: three-phase, table load: 500 kg, overall weight: 2,800 kg, input voltage: 400 V, warranty duration: 12 months, Equipment: documentation/manual, Vertical Milling Machine Vertical milling machines are characterized by the ability to move the entire spindle head along the column guideways. This machine is ideally suited for machining tools, fixtures, and engine components. Features Vibration-damping cast iron construction reducing vibrations and oscillations Protective guards compliant with current safety standards Automatic feed on all three axes Rapid feed on all three axes Digital display (DRO) Infinitely variable feed rate Servo drives ensuring precise and safe operation Large worktable with high load capacity Hardened and ground gears significantly reducing noise Central lubrication system Functional control panel for intuitive operation Adjustable head angle allowing various machining positions Table guard available as optional equipment. Lrodoyuculepfx Afaek Technical Specifications Parameter Specification Table size 1600 × 360 mm Maximum table load 500 kg Table swivel angle -45° / +45° X/Y/Z travel 1300 / 320 / 450 mm X-axis feed rate 30–750 mm/min Y-axis feed rate 20–500 mm/min Z-axis feed rate 15–375 mm/min Rapid feed X/Y/Z 1200 / 800 / 600 mm/min T-slots 3 / 18 / 80 mm Spindle taper Horizontal ISO50 / Vertical ISO50 Upper ram travel 550 mm Distance between vertical spindle and table 196–646 mm Distance between horizontal spindle and table 20–470 mm Vertical spindle speed (12) 60–1750 rpm Horizontal spindle speed (12) 60–1800 rpm Vertical spindle motor 4.0 kW Horizontal spindle motor 5.5 kW Feed motor power X/Y/Z 1.5 / 1.5 / 1.5 kW Servo drive 10 Nm Dimensions (L × W × H) 2520 × 2100 × 2000 mm Weight 2800 kg

Condition: excellent (used), Year of construction: 2001, overall weight: 16,000 kg, - Building year 2001 - Infeed height 350 / 400mm - Infeed width 1.600mm Ledpfx Afoyzn S Djajrk - Rotor Ø 1.200 mm - motor 180 KW - Weight 16 to Possible drive power 160 - 400 KW Possible throughput up to 60 to/ h, with the right material and motor. Many parts are new as rotor bearings, infeed roller bearings, screen, hammer, anvil, etc. Optional: drive motor, electrical control, infeed shaker.

Year of construction: 2001, condition: excellent (used), - Building year 2001 - Infeed height 350 / 400mm - Infeed width 1.600mm Lrsdpfxoyzn H Ie Afajk - Rotor Ø 1.200 mm - Weight 16 to Possible drive power 160 - 400 KW Possible throughput up to 60 to/ h, with the right material and motor. Many parts are new as rotor bearings, infeed roller bearings, screen, hammer, anvil, etc. Optional: drive motor, electrical control, infeed shaker.

Condition: good (used), Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger, oil cooler -Heat exchanger: Oil cooler, shell and tube heat exchanger -Connections/Dimensions: see photos -Dimensions: 1005/1600/H110 mm -Weight: 13.5 kg Lredpfsyzn Dtjx Afaek

Condition: good (used), Year of construction: 2011, functionality: fully functional, - The beveling machine is specifically engineered for high-precision processing on both linear and non-linear edges, with full adaptability to varying sheet thicknesses and geometries. Lrodpfx Ajtmrkrefaok -Featuring an advanced Trace Tracking System, it intelligently detects and follows complex part contours—ensuring accurate, consistent, and efficient beveling, even on intricate components.

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 2,000 kg, lifting height: 1,600 mm, load center: 600 mm, mast type: simplex, fork length: 1,150 mm, tire condition: 100 %, front tire type: polyurethane tires (non-marking), empty load weight: 250 kg, total height: 2,030 mm, total length: 1,642 mm, total width: 740 mm, color: yellow, Equipment: pallet forks, A mast trolley with a lifting capacity of 2000 kg is a versatile device used for unloading delivery vehicles as well as for work in warehouses and shops. Its solid construction ensures long service life, while the polyurethane wheels provide quiet and trouble-free operation. Technical Specifications Load capacity: 2000 kg Lifting range: 85–1600 mm Fork length: 1150 mm Mast type: single mast Overall height: 2030 mm Height with forks raised: 2030 mm Overall length: 1642 mm Fork outer width: 550 mm Overall width: 740 mm Net weight: 250 kg Number of wheels (front/rear): 2 / 2 Wheel and roller material: polyurethane Steering wheel dimensions: 180 × 50 mm Lredpfeytcmrex Afajk Roller dimensions: 75 × 70 mm Load center: 600 mm Fork width: 160 mm Fork height: 60 mm Fork inner width: 390 mm Adjustable fork spacing: Yes Delivery to the customer is possible. The delivery cost is determined individually according to the carrier’s quotation. Should you be interested in other machines please visit our website.

Condition: used, Alco twin shaft paddle mixer with cooling Model: AMP 1600 Capacity: 1600 l Power: 15 kW Lrsdpoy Algnofx Afaek Dimensions: 2800 mm x 1600 mm x 2100 mm

Condition: good (used), Year of construction: 2011, Table size: 1800 x 800 mm Tool holder: DIN 69871 ISO 40 Travel paths: X-axis: 1615 mm, Y-axis: 815 mm, Z-axis: 725 mm Table load capacity: 2000 kg Spindle speed range: 0 - 10,000 rpm Feed rate: up to 10 m/min Rapid traverse: 24 m/min Space requirements (W x D x H): approx. 5400 x 4550 x 3120 mm Drive power: 15 / 18.5 kW Weight: 10,000 kg Accessories / Special Features: • CNC path control FAGOR • ICS coolant through spindle, 20 bar • 24-position tool changer • Hinged belt chip conveyor Lredpfxsyy Npnj Afaek • Coolant system • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 2006, Demag systec 160/520-430 (2010) Lrodpfjyyzpyex Afaek

Condition: ready for operation (used), Year of construction: 2001, operating hours: 4,517 h, clamping force: 16,000 kN, screw diameter: 125 mm, injection weight: 7,450 g, This 3-axis Krauss Maffei 1600-17200MC hydraulic injection moulding machine was manufactured in 2001. It features a clamping force of 16,000 kN and a screw diameter of 125 mm. The machine has a maximum shot weight of 7450 g and a platen size of 2600 x 2110 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1600-17200MC machine we have for sale. Contact us for further details. • Injection unit: 17200 • Distance between tie bars (h × v): 1600 × 1250 mm • Platen size (h × v): 2600 × 2110 mm • Clear distance (x × y): 1800 × 1400 mm Lsdpoyyyr Tsfx Afasrk • Max. mold opening stroke: 2,500 mm • Mold installation height (min–max): 900–1,600 mm • Opening width: 3,400 mm • Mold opening force: 1,108 kN • Moving platen force: Opening 177 kN / Closing 153 kN • Ejector stroke: 300 mm • Ejector force (forward/backward): 415 / 177 kN • Operating voltage: 400 V / 50 Hz • Motor current: 446 A • Heating current: 164 A • Total pump operating hours: 73,761 h Additional equipment • Spare cylinder/screw set (1x) • Internal cooling system • Core pullers (2x)

Condition: excellent (used), Numerical Control Power Control + Software Cadmatic 4 Professional No. 1 Infeed roller tracks (ca.) 32,000 mm Lifting table (mm) 5600 x 2200 VAC loader (sliding bridge) with fan suction for loading special or delicate panels 1° Rear-pusher, with No. 6 clamps/grippers Turning device (rotating unit) at 90° 1° Panel Saw - Max cutting width mm 5600 (cutting line with air cushion) Max blade projection (mm) 190 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 600 ( Kw 36) Adjustable speed of the saw carriage (QS) (m/min) 1 - 130 m/min 2° Rear-pusher, with No. 14 clamps/grippers 2° Panel Saw - Max cutting width mm 2200 (cutting line with air cushion) Max blade projection (mm) 190 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 600 (Kw 36) Adjustable speed of the saw carriage (QS) (m/min) 1 - 130 m/min Waste evacuation system with grinder (Kw 19.5) No. 2 Front supporting tables with Air blowing system (mm 800 x 2160) Plastic wheels coated with special material to avoid scratching delicate panels Automatic unloading System of the cut panels: N° 2 x Liftomat HAU-A 25/12 Lrjdpfsvnq H Eex Afaok Automatic Stacking System with 8 stations

Condition: good (used), Year of construction: 1999, load capacity: 1,600 kg, lifting height: 2,900 mm, fuel type: electric, mast type: duplex, empty load weight: 1,300 kg, Taken in part exchange Electric stacker Brand: BT Year: 1999 PALLET BLOCKS: external fork width 68 cm Lodpfxjyc Eygo Afaork Capacity: 1,600 kg Lift height: 2,900 mm Overall height: xxx mm Battery: maintenance-free GEL with charger Watch the video on YouTube

Condition: used, Year of construction: 1994, Make: HYDRAP, Model: HPDZ b 1600, Year of manufacture: 1994, Serial No.: 6784, Max. pressure: 1,600 t (ram 1,000 t + blank holder 600 t, can be coupled), Sliding table, 3,600 x 2,200 mm, Ram clamping area 3,620 x 2,200 mm, Ram stroke 1,500 mm, Table draw cushion pressure 36 - 360 t, Table draw cushion stroke 450 mm, Press control, Operator panel, swiveling, Linear robot Strothmann +++ Note: Machine is part of an online auction! +++ Lrsdsx Ry Tfspfx Afaek

Condition: excellent (used), Trumpf TC500-1300 including Sheetmaster, powered on Lredpfx Afoyybc Hsajk

Condition: used, Year of construction: 1997, pressure 130 t distance between columns 1600 mm stroke 8 - 140 mm no. of strokes 50 - 200 Hub/min dayligth (stroke and adjustment up) 520 mm column travel -side 610 mm table surface area 1600 x 880 mm hole in the table 1000 x 350 mm table height over floor 950 mm ram surface 1600 x 880 mm power requirement 24,2 kW weight of the machine ca. 28,00 t required space 4,3 x 2,2 x 3,8 m ram adjustment 100 mm Lrjdpfx Afjvuugcoajk permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, electronic roll feed (Hensel, EVX 500) with hydraulic intermittent lifting 2025 - in progress: new electrical (safety) control - Siemens S7-1500 F, easy operation via touch-panel Video at seller's site before dismantling available

Condition: new, power: 25 kW (33.99 HP), travel distance X-axis: 1,620 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 640 mm, workpiece weight (max.): 1,300 kg, number of slots in tool magazine: 30, controller manufacturer: HEIDENHAIN, overall weight: 11,000 kg, table length: 1,700 mm, table width: 620 mm, controller model: TNC 7, coolant supply: 20 bar, rapid traverse Z-axis: 30,000 m/min, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rotational speed (max.): 10,000 rpm, spindle nose: SK 40 BIG PLUS, table load: 1,300 kg, tool diameter: 150 mm, tool length: 300 mm, tool weight: 8 g, Equipment: CE marking, chip conveyor, documentation/manual, rotational speed infinitely variable, LAGUN L 1600 Machining Center – Available Immediately The LAGUN L 1600 machining center stands for high precision, robust construction, and cost-effective manufacturing. Ideal for single-part as well as series production in mechanical engineering, tool and die making, and contract manufacturing. Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly via JMT ✔ Financing / hire-purchase possible ✔ Compact design for maximum stability ✔ 24-month warranty Why LAGUN: LAGUN is one of Spain’s leading machine tool manufacturers (MAHER HOLDING), synonymous with robust design, high dynamics, and durable machine concepts. The machining centers impress with their reliability, easy maintenance, and low operating costs. Technical specifications: Control system: HEIDENHAIN TNC 7 CNC control + 16" TFT display HEIDENHAIN motors, measurement systems, and electronic handwheel HR 510 Chip removal: Chip conveyor Preparation: Prepared for 4th axis (rotary table) Enclosure: Fully enclosed with side opening viewing windows Ledpohy Atiefx Afajrk Accuracies: Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Your advantages as a JMT customer: ✔ Official LAGUN distributor in Germany ✔ Technical support and on-site service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we are happy to advise you and provide a customized quote.

Condition: good (used), Pallet wrapper, strapping machine, packaging machine, strapping machine, skinpack machine, stretch wrapping machine, stretch film machine, wrapping roll, roll carrier for cardboard roll Lrsdpsxmi H Rsfx Afaok -Roll carrier: winding roll for packaging machine -Roll: Ø 148 x 1600 mm -Drive shaft/mount: Dimensions see photos -Dimensions: Ø 148 x 1870 mm -Weight: 38 kg

Condition: used, Year of construction: 1973, pressure 1600 t distance between columns 3160 mm ram stroke 1450 mm distance table/blankh.,max. stroke up,adjustm. up 2250 mm table surface area 4000 x 2200 mm ram pressure 1000 t pressure of blank holder 600 t Ljdpfsvxwhwjx Afaork stroke of blankholder at the bottom 1000 mm stroke of blankholder with adjustment 0-100 mm 1450 mm blank holder size 4000 x 2200 mm die-cushion pressure inside the table 360 t stroke of drawing cushion in table 275 / 400 mm ram surface 4000 x 2200 mm column travel -side 1100 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled oil volume 9000 l total power requirement 390 kW weight of the machine ca. 250 t dimensions of the machine ca. 6,0 x 4,3 x 10,5 m Head press (1600 tons) of a press line with five subsequent presses (800 tons)

Year of construction: 1999, condition: good (used), functionality: limited functionality, !!! Important!!! The systems have now been dismantled. The system components are available for inspection. Offered here are two functional SLC (Surface-like Chrome) vacuum coating systems/evaporation systems from PVT GmbH. The third, non-functional system is no longer for sale. The system documentation is available in paper form and will be provided upon purchase. To operate the systems, a compressed air supply, power supply, and water cooling are required, which must be provided by the buyer. All other PVT processes are, of course, also possible. The system was primarily used to treat wheel rims. Other workpieces made of aluminum, steel, or plastic are also possible, such as bathroom/kitchen fixtures, motorcycle and car components, door and window handles, etc. What is the advantage of the SLC process compared to chrome plating: - SLC coating is a high-gloss coating that is visually comparable to a galvanic chrome coating. The SLC coating is a high-gloss coating that is visually comparable to a galvanic chrome coating. - Significantly less susceptible to scratches and chipping - The process is more environmentally friendly and offers outstanding corrosion resistance - Costs are significantly lower Technical data: Chamber dimensions: approx. 1600 mm diameter and approx. 900 mm height Type: PVT 1600 SLC Manufacturer: PVT GmbH Year of manufacture: 1998/1999 Documentation: Available Control system: Allen Bradley PLC (automatic coating process including hardware) Lredjyzdm Rspfx Afaek

Condition: new, Year of construction: 2025, - Cutting Force : 1600 Tons Ledsgv Acuspfx Afaerk - Capacity : up tp 70 tons per hour - Side Compression Force : 2 x 220 Tons - Clemp Compression Force : 250 Tons - Electric Motor : 480 kW - Machine Weight : 150.000 kg - PLC Controlled - Remote Control Avaliable - Output Length Adjustable

Condition: good (used), Year of construction: 2008, Machine is in good working condition. Parts shown by hand not come. Lrjdpfsyfgx Njx Afaek Technical details are shown on pictures.

Condition: ready for operation (used), Year of construction: 2015, clamping force: 1,600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection units and plasticizing • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • 2nd injection unit: • 2nd injection unit 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Nozzle contact force controlled, programmable Lrsdpfxoyxdwds Afajk • aXw Control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multi-component processing; parting line setup on short runners for 2nd injection unit • Injection closing with mold (“flying injection”) • Drive, hydraulics, and cooling • 65 l/min charging flow rate • Pressure accumulator module, 64 l storage volume (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; increased cooling capacity • Machine cooling circuits controlled • Clamping system, ejector, and core pulls • Clamping plate set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1 simultaneous movement (P/Q controlled, programmable) • Core pull 2 simultaneous movement (P/Q controlled, programmable) • Core pull 3 simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 incl. pressure reducer • Electric core pull control 1 (requires VE 436/00) • Tool pneumatics/hydraulics connections • Electrical connection pneumatic NVD 1 (in tool) • Electrical connection pneumatic NVD 2 (in tool) • Electrical and hydraulic connection NVD 3 (in tool) • Electrical and hydraulic connection NVD 4 (in tool) • Blow-out device 1 with pressure reducer; connection for blow-out device 2 • Cooling water and mold circuits • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to fixed mold plate; 3 cooling water circuits to moving mold plate • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and electrics • Selogica direct control; technology level • Fuse protection for heating circuits (1–6 with 16 A) • 15 electrical heating circuits for mold heating • Boost function for heating circuits (hot runner) • Upper guard open, raised to safety clearance • Fault indicator with flashing light • Operator authorization with chip card (EUROMAP 65) • Interfaces and connectivity • Interface for conveyor belt (machine base) • Prepared for six-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA • Temperature control unit interface (20 mA); temperature control cable HB-THERM • Serial printer interface USB; external USB keyboard interface