Used Water Jet Cutting System for sale (49,998)

Year of construction: 2026, condition: new, functionality: fully functional, New unit with a 12-month warranty. Advantages of chilled ice water: + consistently low water temperatures + precise dough temperature control throughout the year + rapid swelling during mixing without ice + fluffier doughs thanks to freshly chilled, liquid ice water + precise dosing is possible using a water mixing and dosing device + water-carrying parts are made of stainless steel and require no cleaning + hygienically flawless, clean drinking water Langheinz ice water systems are characterized by: + consistently low water temperatures + high-performance refrigeration units + refrigeration systems with expansion valves + electronic ice bank controllers + stainless steel cooling evaporators + multi-stage stainless steel water heat exchangers + insulated stainless steel ice water tank + drain valve in the ice water tank + high flow rate + compact dimensions + easy-to-clean surface + low energy consumption SPECIAL accessories, optionally available at an extra cost: - Wall bracket made of stainless steel (for models L130 + L170): + €499.00 net - Machine table (for models L130 + L170): + €589.00 net - 3-way diverter valves Bjdjivdvkjpfx Al Rjwr --- for water mixing and dosing devices with only 2 inlets (cold / warm) + €349.00 net Technical data: - Batch size (recommended): up to 40 liters - Continuous output*: 70 liters/hour - Peak cooling capacity*: 230 liters/hour - Ice bank: 30 kg - Cooling capacity (CECOMAF): 1,189 kW - Connection values: 230 V - 50 Hz - Power consumption: 670 W - Water connection: 1/2 inch - Water flow rate at 2 bar: 15 liters/min - Dimensions: 560 x 590 x 900 mm (L x W x H) - Net weight: 60 kg - Energy consumption per 100 liters: 1.5 - 2.5 kWh * with +17.5°C inlet and +2.5°C outlet

Year of construction: 2026, condition: new, functionality: fully functional, New unit with 12 months warranty. Advantages of chilled ice water: + consistently low water temperatures + precise dough temperature control year-round + rapid hydration when mixing without ice + fluffier doughs due to freshly chilled, liquid ice water + precise dosing possible via water mixing and dosing unit + water-carrying parts are made of stainless steel and require no cleaning + hygienically clean drinking water Langheinz ice water systems are characterized by: Bodeivdu Uspfx Al Rswr + consistently low water temperatures + high-performance refrigeration units + refrigeration systems with expansion valve + electronic ice bank controllers + stainless steel cooling evaporators + multiple stainless steel water heat exchangers + insulated stainless steel ice water tank + drain valve in the ice water tank + high flow rate + compact dimensions + easy-to-clean surface structure + low energy consumption SPECIAL accessories, optionally available at an extra charge: - Wall bracket made of stainless steel (for models L60 + L100): + €319.00 net - Machine table (for model L60): + €399.00 net - 3-way changeover valves --- for water mixing and dosing units with only 2 inlets (cold / warm) + €349.00 net Technical data: - Batch size (recommended): up to 15 liters - Continuous output*: 50 liters / hour - Peak cooling capacity*: 90 liters / hour - Ice bank: 10 kg - Cooling capacity (CECOMAF): 1.013 kW - Connection values: 230 V - 50 Hz - Power consumption: 575 W - Water connection: 1/2 inch - Water flow rate at 2 bar: 8 liters / min - Dimensions: 650 x 400 x 560 mm (LxWxH) - Net weight: 50 kg - Energy consumption for 100 liters: 1 - 2 kWh * at +17.5°C inlet and +2.5°C outlet

Year of construction: 2026, condition: new, functionality: fully functional, New unit with a 12-month warranty. Bwjdpsivdvvsfx Al Ror Advantages of chilled ice water: + consistently low water temperatures + precise dough temperature control year-round + rapid swelling when mixing without ice + fluffier doughs due to freshly chilled, liquid ice water + precise dosing possible via water mixing and dosing unit + water-carrying parts are made of stainless steel and require no cleaning + hygienically impeccable clean drinking water Langheinz ice water systems are characterized by: + consistently low water temperatures + high-performance refrigeration units + refrigeration systems with expansion valve + electronic ice bank controllers + stainless steel cooling evaporators + multiple stainless steel water heat exchangers + insulated stainless steel ice water tank + drain valve in the ice water tank + high flow rate + compact dimensions + easy-to-clean surface structure + low energy consumption SPECIAL accessories, optionally available at an extra charge: - Wall bracket made of stainless steel (for models L130 + L170): + €499.00 net - Machine table (for models L130 + L170): + €589.00 net - 3-way diverter valves --- for water mixing and dosing units with only 2 inlets (cold / warm) + €349.00 net Technical data: - Batch size (recommended): up to 50 liters - Continuous output*: 115 liters/hour - Peak cooling capacity*: 330 liters/hour - Ice bank: 40 kg - Cooling capacity (CECOMAF): 1.86 kW - Refrigerant: R290 (new 2021 standard!) - Connection values: 230 V - 50 Hz - Power consumption: 1.45 kW - Water connection: 1/2 inch - Water flow rate at 2 bar: 20 liters/min - Dimensions: 560 x 590 x 900 mm (L x W x H) - Net weight: 80 kg - Energy consumption for 100 liters: 1.5 - 2.5 kWh * at +17.5°C inlet and +2.5°C outlet

Year of construction: 2026, condition: new, functionality: fully functional, New unit with a 12-month warranty. Advantages of chilled ice water: + consistently low water temperatures + precise dough temperature control throughout the year + rapid hydration during mixing without ice + fluffier doughs thanks to freshly chilled, liquid ice water + precise dosing possible via water mixing and dosing unit + water-carrying parts are made of stainless steel and require no cleaning + hygienically clean drinking water Langheinz ice water systems are characterized by: + consistently low water temperatures + high-performance refrigeration units + refrigeration systems with expansion valve + electronic ice bank controllers + stainless steel cooling evaporators + multi-tube stainless steel water heat exchangers + insulated stainless steel ice water tank + drain valve in the ice water tank + high flow rate + compact dimensions + easy-to-clean surface + low energy consumption SPECIAL accessories, optionally available at an extra cost: - 3-way diverter valves --- for water mixing and dosing units with only 2 inlets (cold / warm) + €349.00 net Technical data: - Batch size (recommended): up to 70 liters - Continuous output*: 230 liters/hour - Peak cooling capacity*: 500 liters/hour - Ice bank: 60 kg - Cooling capacity (CECOMAF): 3.978 kW - Connection values: 400 V - 50 Hz - 1 phase - Power consumption: 2.84 kW - Water connection: 1/2 inch - Water flow rate at 2 bar: 25 liters/minute - Dimensions: 1170 x 630 x 770 mm (L x W x H) - Net weight: 145 kg - Energy consumption per 100 liters: 1.5 - 2.5 kWh Bsdpsivdv Defx Al Rewr * at +17.5°C inlet and +2.5°C outlet

Condition: ready for operation (used), Year of construction: 1985, A Bullmerwerk fabric spreading machine including a Wastema band knife cutting machine is available. 1) Bullmerwerk fabric spreading machine, ESV20-160, max. fabric width: 1800mm, table length range: approx. 9500mm-13500mm, table width range: approx. 1800mm-2000mm, max. ply length: approx. 11000mm. Year of manufacture: 1985. 2) Wastema band knife cutting machine, cutting height range: approx. 250mm-300mm, throat depth range: approx. 750mm-1270mm, band knife speed: approx. 16m/s, weight: approx. 300kg. 3) Rietschle SKG 226-2.02 vacuum unit, year of manufacture: 1984. The system including 3 pieces km Mack KS-AU-V, speed: 3000/3600 rpm. Inspection possible by arrangement. Bwedpfx Aezf Nb Sjl Ror

Condition: new, Year of construction: 2025, We produce and install complete plants for water and juice , still or carbonated. The complete line consists of : bottle blowing machine, automated feeding PET , compact washing , filling and capping machine. Each capping machine has automated cap feeder and sterilization station for caps. We provide high productivity filters and CIP automated hygienisation station. As option we can add the carbonated station completed with chiller and heat exchange unit. After bottles are filled we install X ray machine for inspection, oven for increasing liquid temperature, water blowing machine to clean the bottles, labeling machine, date and lot machine, bottle case packing machine, palletising unit, stretch film machine to hold pallets. Bwsdpfsu Nad Tox Al Ror

Condition: used, Year of construction: 2021, operating hours: 1,231 h, functionality: fully functional, total width: 720 mm, total length: 950 mm, total height: 800 mm, pressure: 500 bar, operating pressure: 450 bar, type of input current: three-phase, overall weight: 175 kg, high-pressure hose length: 20,000 mm, volume flow: 0.96 m³/h, empty load weight: 175 kg, input voltage: 400 V, hose length: 20,000 mm, High-pressure washer/sandblaster DENJET CE 20 COMPACT 500 Bwsdpfxeyak Tyj Al Rjr - Pressure: 500 bar - Flow rate: 16 l/min - Power supply: 15 kW - Voltage: 400 V - Current: 28 A - 20 m wear-resistant high-pressure hose with ½” BSPP female swivel couplings (extension hose). - 15 m oil-resistant 4-core electric cable. - Dry shut-off trigger gun with 0.85 m stainless steel lance. - Straight jet nozzle - CEE electric plug. - Rotating nozzle. - Sandblasting kit with boron carbide nozzle. - Mobile abrasive container. - Personal protective equipment: helmet with eye protection, waterproof coverall, protective apron rated for up to 1000 bar, protective boots size 43.

Year of construction: 2007, condition: excellent (used), machine/vehicle number: 20051619, Basic Functions: Slit, Cross cut, Crease In-feed paper size: 210(W)x210(L) to 370(W)x520(L)mm Minimum finished size: 55(W)x45(L)mm Paper weight: 120 to 400gsm *Depending on paper quality Operation: 4" Touch Screen Job memories: 263 preset jobs & 150 customized job memories. (100 MANU SET + 50 FLEX MODE) Feeding mechanism Upper belt tri-suction suction feed (Patented) Side blower Skew adjustment Side aligner Double feed detection Bsdpfxehii Sws Al Rowr Cut mark registration Feed tray stacking capacity: 100mm Speed 8.8 sheets / min. : SRA3 21up business card 11 sheets / min. : SRA3 8up post card 12.2 sheets / min. : SRA3 4up greeting card 15.4 sheets / min. : A4 2 cuts & 1 crease

Year of construction: 2020, condition: used, This listing is for the Waters e2695 Alliance HPLC System Bsdpfx Alsy H Egvs Rowr The unit is in full working condition and ready for immediate use Designed for high-performance liquid chromatography, the Waters 2489 UV/Vis detector delivers accurate and reliable analysis. Ideal for research and quality control labs, it offers stable wavelength detection and seamless integration with HPLC systems. Transparency Report and Technical Audit: Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Year of construction: 2020, condition: used, This listing is for the Waters e2695 Alliance HPLC System The unit is in full working condition and ready for immediate use Designed for high-performance liquid chromatography, the Waters 2489 UV/Vis detector delivers accurate and reliable analysis. Ideal for research and quality control labs, it offers stable wavelength detection and seamless integration with HPLC systems. Includes Waters e2695 Seperations Module Transparency Report and Technical Audit: Bwedpfx Aloy H E Sls Rsr Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: like new (used), Year of construction: 2016, operating hours: 1,275 h, functionality: fully functional, machine/vehicle number: W09FAL226GMF14035, operating pressure: 2,500 bar, total length: 3,750 mm, high-pressure hose length: 2,000 mm, total height: 2,040 mm, total width: 1,980 mm, empty load weight: 1,980 kg, fuel: diesel, Equipment: chassis, Falch Trailer Tandem Trail Jet 125, equipment can also be sold individually. ATTENTION: A sedimentation system, model cont. sed 100.100 from Falch, can be purchased separately; price upon request. Extensive accessories, see photos. Used Falch Trail Jet 125 high-pressure cleaner with a working pressure of 2500 bar. The unit is in very good technical condition and ready for use. The following components are included with the unit: Bwodpfx Aozdy Imel Rjr - 3 high-pressure hoses from Falch, 1 loose, 2 on the frame - 1 control line for connecting the Falch gun - 2 rotating 4-nozzle heads from Falch - Falch spray gun - Whel Fan 2, year of manufacture 2020 - Floor cleaner Scater 25 260 vc - Additional accessories for the machine: seal kits, filters, etc. Technical data: Year of manufacture 2016, with only 1275 operating hours. The unit allows adjustment of the working pressure.

Condition: ready for operation (used), Year of construction: 2010, Large semi-automated Pace cutting system Polar 137 XT-Autotrim with pile lifter, jogging system with count scale, gripper transport system, rotary gripper, and delivery unit Year: 2010 Approx. 5.43 million cuts Workflow: The material to be cut is raised to an optimal working height using a loading lift, placed into the jogger by the operator, automatically jogged, and then transported via the Autotrans gripper system from behind the jogger to the rear table of the high-speed cutter and rotated. After cutting, the Transomat automatically stacks the layers onto a pallet, allowing continuous cutting operations. Polar Stack Lift LW 1200-4 Platform size: 80 x 126 mm Load capacity: 1200 kg Equipped with steplessly adjustable photoelectric sensors for automatic lifting and lowering. Jogger RAH-4 with air removal roller and unloading for rear-table feeding Working format up to 75 x 105 cm Unloading of the jogged cutting material occurs automatically to the rear into the STR stacking rack. The Autotrans gripper transport system then handles layer transport onto the rear table of the high-speed cutter. Sheet scale – Polar count scale Avery Weigh-Tronix For creating quantity-accurate cutting layers Gripper transport system POLAR Autoturn – clamp transporter for rear-table loading and rotary gripper Takes over the prepared cutting layer from the stack rack or buffer table Via air tables, which use air cushion for optimized material handling, the cut material is transported directly onto the rear table of the high-speed cutter and placed with precision. The cutting layer is held firmly by the grippers during transport, ensuring even pre-aligned layers remain precisely squared during movement. Bedpfxsxd U Saj Al Rewr Cutting machine Polar 137 XT-AT with touch control And Autotrim function for automatic waste removal under the front table during cutting - Lowerable side gauge left (required for rear-table loading); also allows handling of formats with a diagonal of...

Year of construction: 2017, condition: ready for operation (used), A compact FIC/Rivacold chiller is available. Usable volume: 410l, cooling capacity: 33.7kW, compressor: S15-52Y, compressor power: 15HP, tank load capacity: 725kg, refrigerant: R404A, cooling tower water consumption: 9.3m³/h, cooling unit water consumption: 3.6m³/h, machine dimensions X/Y/Z: approx. 750mm/1600mm/1900mm. Documentation available. An on-site inspection is possible. Bjdpfx Aszcp Uhsl Rswr

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, For sale is a Nordson Pico Puls Jet system including accessories. The offer includes the following components: - 1 piece Pico Touch Controller (item no. 7361217) - 1 piece Pico Puls Jet valve (item no. 7361283) - 2 pieces 2m extension cable (item no. 7361298) - 1 piece quick-change holder for robots Bwsdpfoy D Shbox Al Rsr Additional accessories are available for purchase at an extra cost: - 1 piece Pico Puls fluid body 5.0 S P7 D15 (item no. 7362711); selling price 500.00 EUR each - 3 pieces Pico Puls fluid body 5.0 S F0 D30 (item no. 7362584); selling price 500.00 EUR each

Condition: used, Oil-water separator KAESER BEKO, type Öwamat Tank diameter: 600 mm Overall height: 1200 mm With activated carbon filter Space requirement: Ø 700 x 1200 mm Weight: approx. 30 kg Bwodoy Ty Sajpfx Al Rer In good condition.

Condition: like new (used), Year of construction: 2025, operating hours: 320 h, functionality: fully functional, pressure: 2,800 bar, overall weight: 3,000 kg, rotational speed (min.): 1,900 rpm, pump capacity: 30 l/min, Equipment: type plate available, HAMMELMANN AQUAJET 144 Bedpfxjvgrpxe Al Rjwr GWARANCJA PRODUCENTA SILNIK DEUTZ TCD 6.1 ST5 140 KW DOSTĘPNY OD ZARAZ

Condition: used, Compressed air dryer PARKER HIROSS for compressor systems Mechanical condensate separator, water separator Refrigerant dryer with water-cooled aftercooler for removing water vapor and cooling the compressed air or gases. 1 aftercooler, type WFN009 DHH16 Air flow rate (normal): 540 m3/h = 9000 liters/min. Operating pressure (air): max. 16 bar Housing length: 1020 mm Housing diameter: Ø 105 mm Threaded air connection: G 2" Threaded water connection: G 3/4" Weight of aftercooler: 11 kg Dimensions of aftercooler (L x W x H): 1030 x 850 x 200 mm + 1 water separator, type CSP 008 Flow rate (normal): 480 m3/h = 8000 liters/min. Operating pressure: max. 16 bar Threaded connection: G 2" - Filter housing made of aluminum + 1 mechanical condensate separator HIROSS SAC 120 Threaded connections: R 1/2" Operating pressure: 16 bar Volume: 0.8 liters - Operates without compressed air loss Bjdodzqn Ujpfx Al Rswr All components mounted as shown in the pictures. Height when mounted vertically: 2000 mm Total weight: approx. 40 kg

Condition: new, Year of construction: 2024, Everything can be configured according to your needs, with very short production and delivery times. Upon request, we will gladly provide you with further information. Technical data available upon request. Standard equipment: Steel welded construction DURMA CNC control unit (AURORA) Bwedefiqgrspfx Al Rsr Remote control diagnostics (Ethernet) Lantek software with automatic nesting Position determination of the sheet to be cut using a laser DURMA torch height control Double-sided drive system (rack and pinion) AC servomotors for movement in the X and Y axes CNC control outputs/inputs for the filter unit Consumables starter kit Plasma torch * Ignition console * Torch height control with Ball screw spindles on double Linear guides * Optional equipment: Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch Hypertherm HPR 130 XD + hose package + nozzles + Durma THC + ignition console + torch Hypertherm HPR 260 XD + hose package + nozzles + Durma THC + ignition console + torch Hypertherm + Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + torch CE standard safety wire Automatic gas console for Hypertherm Manual gas console for Hypertherm Oxy-fuel cutting torch Plasma torch protection system Manual plasma angle cutting head CNC angle cutting head (+/- 45) Single drilling head Multi-drilling head Filter for 130A, 260A or 400A Pipe cutting unit Ø50 mm - Ø400 mm Additional support for the pipe cutting unit Warning light for errors and program end With over 60 years of experience in the research and production of machines for sheet metal processing, with 8,000 machines produced annually in three technologically advanced manufacturing facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned manufacturers in its industry, whose products are distributed in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing you with competent advice and support when it comes to sheet metal processing machines. Our showroom offers you the opportunity to gain an overview of our machines on site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our mission is to be your direct point of contact on site and to offer you services related to training and customer service. We are now happy to support you from Germany – from consulting to purchasing and throughout the entire life cycle of your machine. With our German branch, we are always there for you, so that we can react quickly and efficiently. Here, we are your reliable partner for technologically advanced solutions in sheet metal processing.

Condition: new, Year of construction: 2024, Everything is configurable upon request, with very short production and delivery times. Upon request, we will gladly provide you with further information. Technical data available upon request. Bsdpfjfirx Tsx Al Rjwr Standard equipment: Steel welded construction DURMA CNC control unit (AURORA) Remote control diagnostics (Ethernet) Lantek software with automatic nesting Position determination of the sheet to be cut using a laser DURMA torch height control Double-sided drive system (rack and pinion) AC servo motors for movement in the X and Y axes CNC control outputs/inputs for the filter unit Consumables starter kit Plasma torch * Ignition console * Torch height control with Ball screws on double Linear guides * Optional equipment: Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch Hypertherm HPR 130 XD + hose package + nozzles + Durma THC + ignition console + Hypertherm torch HPR 260 XD + hose package + nozzles + Durma THC + ignition console + Hypertherm torch + Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + torch CE standard safety wire Automatic gas console for Hypertherm, Manual gas console for Hypertherm, Oxy-fuel cutting torch Plasma torch protection system Manual plasma bevel cutting head, CNC bevel cutting head (+/- 45). Single drilling head Multi-drilling head Filter for 130A, 260A or 400A Pipe cutting unit Ø50 mm - Ø400 mm Additional support for the pipe cutting unit Warning light for errors and program end D9hnyc97o With over 60 years of experience in the research and production of machines for sheet metal processing, producing 8,000 machines annually in three technologically advanced production facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned manufacturers in its industry, whose products are distributed in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact person from the Durmazlar team, who will competently assist you with advice and support when it comes to sheet metal processing machines. Our demonstration center gives you the opportunity to get an overview of our machines on site, to be convinced firsthand by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our task is to be your direct contact person on site and to offer you services relating to training and customer service. We would now like to support you from Germany – from advice to purchase and throughout the entire life cycle of your machine. With our German branch, we are always on site when you need us to be able to react quickly and efficiently. Here, we are your reliable partner for technologically advanced solutions when it comes to sheet metal processing.

Condition: new, Year of construction: 2024, Manufacturer: DURMA Model: HD-F 3015 III Fiber Year of manufacture: Available for order (delivery time 6-8 weeks) Working area X-Y-Z: 3060x1530x160 mm Laser power: 6000 Watt IPG Control system: Siemens Sinumerik 840D Operating hours: 0 h Sheet thickness, mild steel: 25 mm Sheet thickness, stainless steel: 15 mm Sheet thickness, aluminum: 20 mm Sheet size: 3048x1524 mm Load weight: 200 kg/m² Speeds, X-Y axes: 100 m/min. Speeds, X-Y axes, simultaneous: 280 m/min. Bedpfx Aefkpamol Rjwr Positioning accuracy: +/- 0.05 mm Repeatability: +/- 0.05 mm Footprint L/W/H: approx. 14500x7500x2420 mm Weight: approx. 12000 kg Standard equipment Automatic pallet changer Sinumerik 840D control system Auto-focus cutting head Precitec Procutter F150 focus Automatic sheet positioning and sheet size measuring system Automatic nozzle cleaning Positioning laser diode Central lubrication system Simple user interface, parameter page (power-speed-pressure) External CAD/CAM programming software with Autonesting, optionally Lantek software Work area lighting Warning light Multi-chamber extraction system Special laser cutting options Remote maintenance CE marking Extended equipment IPG fiber laser source 6000 Watt including cooler Filter, compact dust collection system Vanterm Motorized chip conveyor for small parts/waste Laser service set Cloud license Lantek Expert Inside software Lantek software with positioning laser diode and automatic sheet layer recognition and measurement Pierceline Focusline

Year of construction: 2024, condition: new, Machine dimensions: • (L x W x H) 5,240 mm x 3,600 mm x 2,400 mm • Width with console: 7,700 mm • Length with filter: 11,000 mm Technical details: • Max. sheet size: 4,000 x 2,000 mm • Cutting speed: 12 m/min • Positioning accuracy: ± 0.1 mm • Repeatability: ± 0.1 mm • Power (Hypertherm XPR 170 XD Optimix): 170 A • Cutting range: • Unalloyed steel, piercing, argon: 40 mm • Unalloyed steel, piercing, air: 35 mm • Unalloyed steel, contour cutting: 60 mm • Alloyed steel, piercing: 22 mm • Alloyed steel, contour cutting: 38 mm • Aluminum, piercing: 25 mm • Aluminum, contour cutting: 38 mm Standard equipment: • Control system: Durma Aurora CNC controller • Truehole Standard • Sheet metal measurement using laser • Torch height control • AC servo motors for X and Y axis • Software: Lantek or Metalix CAD/CAM software with autonesting • 50 pre-programmed part geometries for easy and quick modification • Consumable kit (torch nozzles, etc.) Bodpfsdyfwkjx Al Rswr • Plasma torch • Ignition console • Remote control: remote maintenance Options include: • Hypertherm XPR 170 XD + Optimix + automatic gas control • Filter for HPR 170 XD • Safety system with surrounding safety wire • Oxy-fuel torch with sensor • Plasma torch – interruption system • Air dryer

Year of construction: 2024, condition: new, Everything can be configured according to your requirements; very short production and delivery times. Upon request, we will gladly provide you with further information. Technical data available upon request. Standard equipment: Steel welded construction Bodpfxofirx No Al Rowr DURMA CNC control unit (AURORA) Remote control diagnostics (Ethernet) Lantek software with automatic nesting Position determination of the sheet to be cut using a laser DURMA torch height control Double-sided drive system (rack and pinion) AC servomotors for movement in the X and Y axes CNC control outputs/inputs for the filter unit Consumables starter kit Plasma torch * Ignition console * Torch height control with Ball screw spindles on double Linear guides * Optional equipment: Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch Hypertherm HPR 130 XD + hose package + nozzles + Durma THC + ignition console + torch Hypertherm HPR 260 XD + hose package + nozzles + Durma THC + ignition console + torch Hypertherm + Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + torch CE standard safety wire Automatic gas console for Hypertherm, Manual gas console for Hypertherm, Oxy-fuel cutting torch Plasma torch protection system Manual plasma angle cutting head, CNC angle cutting head (+/- 45). Single drilling head Multi-drilling head Filter for 130A, 260A or 400A Pipe cutting unit Ø50 mm - Ø400 mm Additional support for the pipe cutting unit Warning light for errors and program end With over 60 years of experience in research and production of machines for sheet metal processing, producing 8,000 machines annually in three technologically advanced manufacturing plants with a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned producers in its industry, whose products are distributed in 120 countries. With its branch in Staufenberg near Giessen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing you with competent advice and support when it comes to sheet metal processing machines. Our demonstration center gives you the opportunity to get an overview of our machines on site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our mission is to be your direct contact on site and offer you services related to training and customer service. We are happy to support you now from Germany - from consulting, through purchasing and throughout the entire service life of your machine. With our German branch, we are always available locally when you need us in order to react quickly and efficiently. Here, we are your reliable partner for technologically advanced solutions when it comes to sheet metal processing.

Condition: excellent (used), Lasermax LX550 Roll Feed System with LX581 Module Roll-fed digital print finishing system Designed for continuous-feed digital printing applications Automatic web feeding and tension control Integrated touchscreen control High-volume production capability Suitable for transactional, direct mail and book production workflows Modular system design Made in Sweden Technical Data LX550 Power supply: 230 V, 1-phase, 50 Hz Power consumption: 1800 W Rated current: 10 A LX581 Power supply: 200–240 V, 1-phase, 50/60 Hz Power consumption: 1200 W Rated current: 10 A Circuit breaker: 15 A Bwjdpfx Ajzaq Rfel Rsr Machine Information LX550 Serial No: 09LX550034 LX581 Serial No: 09LX581002

Condition: excellent (used), Year of construction: 2022, operating hours: 650 h, functionality: fully functional, working range: 6,000 mm, sheet thickness (max.): 150 mm, sheet thickness steel (max.): 150 mm, table length: 6,000 mm, working width: 2,000 mm, Equipment: documentation/manual, Used Microstep CombiCut 6001.20 for applications up to 150mm structural steel. The system has the following features: CombiCut gantry, driven on both sides Oxy-fuel cutting torch, acetylene, up to 150mm cutting capacity Piercing, fully automatic Drilling with 10.3kW drilling support Double-sided guided clamping system Bjdpsy Uw Hwefx Al Rjwr Drilling up to 30mm diameter Tapping up to M20 Countersinking corresponding to the drilling diameter Including calibration unit for the drilling tools All tools and carriages on the gantry are driven. Conversion to plasma cutting (straight) is possible! Tool changer mounted at the table end for 6 tools, SK40 tool holders (not included) Oxy-fuel cutting table 6000 x 2000mm, designed for sheets up to 150mm Table is cleaned and ready for immediate use (consisting of 2 elements) Table has electronic flap control Connection to a standard filter system is possible; this can be offered as an optional extra. External machine control with 24" monitor Control cabinet mounted on the gantry to minimize cable drag – therefore, very easy to maintain. Guideways: Milled S49 rails with beveled rack and pinion The machine has been fully tested and inspected. All functions are present and ready for use. The system has an Asper (CAM software) license installed and can be connected to the network. Office licenses are not included! We can offer the system with assembly and commissioning. If assembly is carried out by us, the system will be installed with a functional guarantee. Furthermore, if assembly is carried out by AK Industry, the machine will have a 3-month warranty. Inspection possible at any time!

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, High pressure pump from PTV WJ3030B-1Z waterjet cutting machine. Pump, reducer, main motor of 37 kW, flush valve are overhauled. Bodeyxmmzopfx Al Rowr H2O Jet intensifier 60K 301001-1-R.