Used Wachtel Chamber Furnace for sale (2,561)

Condition: good (used), UNHOLTZ-DICKIE / HS-Simulators Vibration Testing System Type: TA117SA-560 + HS 520 K 60 V Manufacturer: UNHOLTZ-DICKIE Corporation / HS-Simulators Horstmann GmbH For sale is a complete electrodynamic vibration testing system consisting of an UNHOLTZ-DICKIE shaker system, SALL50F power amplifier, VWIN II control system, and an HS-Simulators climate chamber. Ideal for combined vibration and climate testing in industrial, automotive, aerospace, electronics testing, as well as research and development applications. The hall crane / other hall equipment visible in the pictures is not included in the scope of supply. Shaker / Vibrator Manufacturer: UNHOLTZ-DICKIE Corporation Type: 560 System: TA117SA-560 Serial Number: 259 Air-cooled electrodynamic shaker Sine force: 6000 lbf peak / 26.7 kN peak Random force: 5200 lbf RMS / 23.1 kN RMS Max. acceleration of free table: 100 g / 981 m/s² Shaker stroke: 1 inch / 25.4 mm Axial resonance frequency: approx. 2200 Hz / approx. 2.2 kHz Armature effective weight: 45 lb / approx. 20.4 kg Driver Coil: 200 A Sine 140 A Random Air-cooled and vibration-isolated system. Power Amplifier Manufacturer: UNHOLTZ-DICKIE Corporation Type: SALL50F Power Amplifier Serial Number: 4414 Power Module: PML-50-S Master Controller: MCLL50 Supply voltage: 400 V / 3 Phase / 50 Hz Power consumption: 41 kVA / 60 A Blower: 15 kVA / 22 A Maximum Driver Currents: 440 A RMS OUT SINE 300 A RMS OUT RANDOM Forced air cooling. Control System Cedpfjy S S Eisx Acysgu UNHOLTZ-DICKIE VWIN II DSP Vibration Control System including industrial PC / monitor as shown in the pictures Control Console: MA117SA-560 Serial Number: 1838 Charge Amplifier: Type 122P Serial Number: 8963 Supported test types: Random Vibration Sine Vibration Resonance Dwell Classical Shock Pulse SRS Shock & Analysis Sine-on-Random Random-on-Random Gunfire Interfaces: TCP/IP RS232 Ethernet USB HS-Simulators Climate Chamber Manufacturer: HS-Simulators Horstmann GmbH Type: HS 520 K 60 V Temperature range: -60 °C to +180 °C Electrical data: 380 V 17 A 10 kW Refrigerant: R13 R502 Features: Combined climate and vibration testing Complete electrodynamic testing system DSP-based real-time control Forced air cooling system Completely wired testing system Original documentation available: Operating Manual Maintenance Manual System Specifications System Diagrams Performance Curves Dimensions / Weight Amplifier: approx. 1000 x 537 x 825 mm Climate chamber: approx. 1200 x 1800 x 2000 mm Total weight estimated: approx. 2500 – 4000 kg Transportation only by a suitable heavy-duty transport company. Technical data partially estimated. Specifications may vary. Condition Used system from industrial application. Optical condition see pictures. Functionality not fully tested. Inspection possible and desired upon agreement. Scope of delivery UNHOLTZ-DICKIE shaker model 560 SALL50F power amplifier Control console / control system VWIN II controller system Charge amplifier HS-Simulators climate chamber HS 520 K 60 V Industrial PC / monitor as shown in the pictures Documentation and accessories as shown in the pictures Loading possible upon agreement. Commercial sale without warranty. Errors and prior sales excepted.

Condition: excellent (used), functionality: fully functional, El. heated salt bath continuous furnace system, make Kohnle Cgjdpfey Uuwmsx Acyou consisting of Magnetic feeder Hardening furnace Type: BLH 950-650/100-5000 Temperature: max. 950°C Throughput: 200 kg/h Conveyer belt width: 620 mm Effective height: 90 mm Connected load: 160 kW Heated length: 5.000 mm Temperature control zones: 5 Throughput speed: 170 - 20 mm/min. Time in the heating zone: 30 - 240 minutes Gases used: nitrogen, methanol, natural gas, ammonia, propane Salt bath Salt: AS200 Washing system

Condition: excellent (used), El. heated salt bath continuous furnace system, make Kohnle consisting of Magnetic feeder Hardening furnace Type: BLH 950-650/100-5000 Codpfxey Uuu Es Acyjgu Temperature: max. 950°C Throughput: 200 kg/h Conveyer belt width: 620 mm Effective height: 90 mm Connected load: 160 kW Heated length: 5.000 mm Temperature control zones: 5 Throughput speed: 170 - 20 mm/min. Time in the heating zone: 30 - 240 minutes Gases used: nitrogen, methanol, natural gas, ammonia, propane Salt bath Salt: AS200 Washing system

Condition: excellent (used), El. heated continuous furnace system, make Safed consisting of: Magnetic feeder Hardening furnace Type: T 80/54 Ti Throughput: 540 kg/h Temperature: max. 950°C Conveyor belt: effective width 600 mm Effective height: 100 mm Heating power: 229 kW Heating length: 7.200 mm Temperature control zones: 9 Processing time: 15 - 150 minutes Gases used: nitrogen, methanol, ammonia, propane Oil quenching bath Liquid capacity: 4000 l Cjdpfx Acoy Ur Aasyogu Bath temperature: max. 80°C Washing system Annealing furnace

Condition: excellent (used), Weiss Temperature Shock Test Chamber Here we offer you a temperature shock test chamber. Weiss Temperature Shock Test Chamber, Air-Cooled (Compressor has been replaced!) Specifications: Temperature range, hot chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Hot/cold chamber switching time: 10 s Temperature stability: ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width (without and with swivel arm): without... approx. 1820 mm, with... approx. 1915 mm Depth (without and with test chamber door): without... approx. 900 mm, with... approx. 1155 mm Dimensions of the lifting platform (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Cgsdpsk E Htyjfx Acyeu Volume: 130 liters Test chamber load: max. 20 kg Load on the test chamber floor: max. 20 kg Cooling water pressure: min. 2 ... max. 6 bar Max. fuse rating: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of the device: approx. 65 dB(A) Connection values: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Cooling/freezing chamber -External dimensions: 3135 x 1385 x 2260 mm -Internal dimensions: 2970 x 1225 x 2100 mm Cgsdpfx Aoxqc Rkecyeu -Plate thickness: 80 mm -Door clearance: 750 mm -Cooling/Freezing unit in set -Quantity in stock: 1 -The chamber is easy to assemble

Condition: used, Cooling/freezing chamber Viessmann Cjdexqpgrspfx Acyegu -External dimensions: 3300 x 2100 x 2450 mm -Internal dimensions: 3100 x 1900 x 2250 mm -Plate thickness: 100 mm -Door clearance: 800 mm -Stainless steel floor -Cooling/Freezing unit in set -Stock quantity: 1 -The chamber is easy to assemble

Condition: excellent (used), functionality: fully functional, Vemag HR 2x5=10 | Set of 3 industrial smoking and steaming chambers (Total capacity for 30 trolleys) Technical specifications of the set (3 chambers): Manufacturer: Vemag Anlagenbau GmbH Model / Type: HR 2x5=10 (Two-row system) Capacity of a single chamber: 10 standard smoking trolleys (2 rows of 5 trolleys each) Total capacity of the set: 30 Euro / standard trolleys Power supply / Heating medium: Steam Detailed technical data for each chamber: Chamber 1 (Year 1990): Serial number: 5202023 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 400 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Chamber 2 (Year 1993): Serial number: 520.2359 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 270 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Chamber 3 (Year 1993): Serial number: 520.2389 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 270 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Dimensions (for each individual chamber): Internal dimensions: 1230 × 5250 × 2100 mm Overall external dimensions: 3300 × 5750 × 4500 mm Control cabinets included: 3 units, dimensions of each: 800 × 340 × 1000 mm The set does not include smoke generators The Vemag HR 2x5=10 is a powerful, highly advanced industrial system designed for the thermal processing of meat, sausages, poultry, and other food products. The presented set, consisting of three robust steam and smoking chambers, constitutes a complete production line capable of handling up to 30 smoking trolleys simultaneously, making it an ideal solution for large-scale industrial processing plants. The chamber design is based on a two-row system (2 rows of 5 trolleys each), which ensures optimal air and smoke circulation, and therefore a perfectly even distribution of temperature and color at each trolley level. Key advantages: - High-performance steam heating: The use of a steam system operating at a pressure of 6–10 bar allows for rapid achievement of the desired temperatures, reducing the steaming and baking time to a minimum, which directly translates into lower weight loss of the finished product. Cedpfx Acey Ua Rxsyegu - Precise humidity control: Individual steam humidification systems (up to 400 kg/h in the older model and up to 270 kg/h in the 1993 models) guarantee full control over the climate inside the chamber, which is crucial for achieving the ideal juiciness of the products.

Condition: used, Year of construction: 2015, Dimensions (L/W/H) ca. 4020 x 2460 x 2600 mm total power requirement 78 kW filling amount 1200 l carrying capacity max. 0,5 bath temperature 65 °C heating capacity 54 kW In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only part of the scope of Cgsdpfx Aey Sbmiecyeu delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Year of construction: 2011, max. temperature 1280 Grad size of opening 350 x 250 mm depth of chamber 500 mm Cgsdpfx Acjy R Efgeysu volume 41 L voltage 400 V total power requirement 15,0 kW weight of the machine ca. 277 kg dimensions of the machine ca. 1,15 x 1,45 x 1,35 m - Serial-No.: 219660 - control: NABERTHERM B300 - with swivel table 340 x 550 mm

Condition: used, Year of construction: 1994, Drying chamber / Recirculating air drying chamber / Wood drying chamber / Drying system Mühlböck QLSF External dimensions: Length: 10.3 meters Width: 4.2 meters Height: 4.15 meters Internal dimensions: Length: 10.1 meters Width: 3.01 meters Height: 4.0 meters Technical data: Year of manufacture: 1994 Cgodpfx Acoy Tt Easyju Inlet temperature: 95 degrees Fans: 7 x 0.75 kW Immediately available Location: Austria, near Ried im Innkreis

Condition: used, Year of construction: 1995, Drying chamber / Recirculating air drying chamber / Wood drying chamber / Drying system Mühlböck QLSF External dimensions: Length: 13.3 meters Width: 4.2 meters Height: 4.15 meters Internal dimensions: Length: 13.1 meters Width: 3.01 meters Height: 4.0 meters Technical data: Year of manufacture: 1995 Heating capacity: 205 kW Cgsdpfxey Tt Axj Acysu Supply temperature: 90 degrees Water flow rate: 16 m3/h Fans: 9 x 0.75 kW Immediately available Location: Austria, near Ried im Innkreis

Condition: good (used), functionality: fully functional, Year of construction: 2017, Forced convection chamber ovens, electric, 12-month warranty, available for short-term delivery Codpfxjy Tkfwj Acyogu -Temperature 200°C, can be increased to 250°C! -Charging carts, 5 units available, conversion on request -Fast heating times, short process times -Homogeneous temperature distribution of +/- 10°C -Internal dimensions (W x D x H) 3750 x 1400 x 2300 mm -External dimensions (W x D x H) 4850 x 3880 x 1705 mm -Usable volume 11.6 m³ -Control system S!MPAC with touch panel -Program execution with feeler as a cascade control system -Temperature limiter -Signal tower -Directly accessible, with grating rails -Exhaust air volume flow 140 m³/min -Electromagnetic door locking system -Rated power 180 kW -Connection 241 kW!! -Weight approx. 3500 kg -Documentation, CE declaration of conformity We would be pleased to offer transport, installation, and training for your employees. Inspection in our machine hall is possible at any time by appointment. Oven, ovens, drying oven, industrial oven, drying cabinet, heat oven, heat cabinet, forced convection oven, chamber oven, heating oven, chamber convection oven, annealing oven, tempering oven, forced convection chamber oven, hardening oven, Vötsch oven, Weisstechnik, fusing oven, curing oven, post-curing of liquid crystal windows, CFRP support structure, oven for glass, glass tempering oven, glass fusing oven, glass hardening oven

Condition: excellent (used), Year of construction: 2011, 386 USED Koma CDS Refrigerator, Proofing, and Freezer. EXTERNAL DIMENSIONS (in cm): - height 258, - width 265, - length 420. INTERNAL DIMENSIONS (in cm): - height 200, - width 200, - length 355. The price is a net price. Cjdpfx Aoy Thc Tscysgu Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. We have a lot of baking ovens in our warehouses: batch oven, shelf oven, rotary oven, trolley oven, gas, oil, electric, from various manufacturers. We also offer bakery machines, bakery equipment, roll lines, and bread lines. If you want to see our full current offer, visit our Bakeres profile.

Condition: excellent (used), Year of construction: 2018, 385 USED Lilnord Refrigerator-Proofer. NOTE: Unit without control panel. EXTERNAL DIMENSIONS (in cm): Cgsdpfx Asy Tg Smjcyju - H: 249, - L: 350, - W: 197. INTERNAL DIMENSIONS (in cm): - H: 198, - L: 225, - W: 160. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. We have a lot of baking ovens in our warehouses: batch oven, shelf oven, rotary oven, trolley oven, gas, oil, electric, from various manufacturers. We also offer bakery machines, bakery equipment, roll lines, and bread lines. If you want to see our full current offer, visit our Bakeres profile.

Condition: excellent (used), Year of construction: 2015, 384 USED Koma CDS Refrigerator, Proofing and Freezing Unit. TECHNICAL DATA: - Operating temperature range: -10°C to +30°C. EXTERNAL DIMENSIONS (in cm): Codpfey Tg Rvex Acyegu - height 258, - width 265, - length 420. INTERNAL DIMENSIONS (in cm): - height 200, - width 200, - length 356. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. We have a lot of baking ovens in our warehouses: batch oven, shelf oven, rotary oven, trolley oven, gas, oil, electric, from various manufacturers. We also offer bakery machines, bakery equipment, roll lines, and bread lines. If you want to see our full current offer, visit our Bakeres profile.

Condition: good (used), HEESS Hardening Press with IPSEN Rotary Hearth Furnace. Technical Key Data (Furnace): Process: Carbonitriding Workpieces: Gear components, up to Ø 260 mm, 4.7 kg Throughput: approx. 96 parts/hour Dwell time: approx. 56 min Temperature range: 820–960 °C Max. temperature: 1000 °C Uniformity: ±5 K Atmosphere: Endogas with propane/ammonia C-potential: approx. 0.9 %C Furnace: Ø 3000 mm, usable height 750 mm Energy: electric: 33 kVA natural gas: approx. 19 m³/h Cjdpfx Asy Dd Adjcyegu HEESS Hardening Press: Pressing force: 300 kN Workpieces: Ø 60–250 mm, height 10–98 mm Cycle/process parameters: Pressing time: 0.1–10 min Pre-cooling time: 0–100 s Quenching medium: up to 300 l/min Handling: Manipulator + gantry robot (Siemens servo drives)

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Csdjfz U Tqepfx Acyegu Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Year of construction: 2020, condition: new, Description Automatic sprinkling chamber is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic sprinkling chamber is equipped with a set of spray pumps, it was designed so that as little liquid as possible after the process migrates to subsequent processes, thus saving money and improving the quality of washing. This is very important, because apparent savings in systems made without the use of these solutions can generate in the future much higher costs associated with chemistry and waste disposal which will simply be more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development work allowed us to develop a sprinkling chamber with the function of drying details (option) with hot air blown by a set of fans after the washing process. The sprinkling chamber is equipped with an advanced system for creating your own macro programs, which can consist of 10 steps each, depending on the number of tanks, processes can be repeated, their order can be changed, etc. Each tank has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be performed e.g. between processes or at the end of the cycle. • Control installed on the swivel arm for better access • PLC microprocessor control • 7 "touch operator panel • Very large number of nozzles, compared to other solutions • (Option) The possibility of drying details after the washing process • The ability to create your own advanced programs • Advanced damper system made of acid-resistant sheet metal, double protected by limit switches Cgjdpfjfzq Stox Acyju • Tight closing and full flap opening control system • To minimize fluid mixing, separate pipelines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible • Fully automatic operation/ Prices are given in the catalog

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ Cgedefx Nfmepfx Acyeu 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2026, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Cgodpfefy T H Iox Acyou Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ Cjdpfx Aofz I Rxocyogu 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2020, condition: new, Description Automatic sprinkling chamber is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic sprinkling chamber is equipped with a set of spray pumps, it was designed so that as little liquid as possible after the process migrates to subsequent processes, thus saving money and improving the quality of washing. This is very important, because apparent savings in systems made without the use of these solutions can generate in the future much higher costs associated with chemistry and waste disposal which will simply be more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development work allowed us to develop a sprinkling chamber with the function of drying details (option) with hot air blown by a set of fans after the washing process. The sprinkling chamber is equipped with an advanced system for creating your own macro programs, which can consist of 10 steps each, depending on the number of tanks, processes can be repeated, their order can be changed, etc. Cgodpfoflmdbex Acysu Each tank has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be performed e.g. between processes or at the end of the cycle. • Control installed on the swivel arm for better access • PLC microprocessor control • 7 "touch operator panel • Very large number of nozzles, compared to other solutions • (Option) The possibility of drying details after the washing process • The ability to create your own advanced programs • Advanced damper system made of acid-resistant sheet metal, double protected by limit switches • Tight closing and full flap opening control system • To minimize fluid mixing, separate pipelines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible • Fully automatic operation/ Prices are given in the catalog

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 Cgedpfx Acjfzb Rcjyju 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2026, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Cgodpfofz Anpjx Acyeu Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡