Used Thermoforming Machine With Roll Feed for sale (71,086)

Condition: new, sheet width 1070 mm plate thickness 3,0 mm distance between columns 1100 mm diameter of upper rolls 95 mm total power requirement 1,1 KW weight of the machine ca. 420 Kg dimensions of the machine ca. 1600 x 800 x 1200 mm Motorized sheet metal bending machine with: - Foot switch for left / right - manually adjustable rear roller - Hardened rollers - Conical bending Ibedpohfhzvofx Ahyoc - Swiveling top roller - Safety device emergency leash - Documentation currently only in English - 400V

Condition: ready for operation (used), Year of construction: 2016, A complete SML winder including core magazine is available. Infeed part roll width: 2600mm, max. film end width: 2350mm, winding shafts: 6/3 inch, max. mechanical speed: 250m/min, max. roll diameter: 980mm, film thickness range: 15µm-2500µm, core diameter: 3 inch, core type: cardboard/plastic, roll change time: 4min, deposit capacity 2nd table: 15 rolls, power requirement: 52kW, edge trimming: In-Line, Knife type: free cut with razor blade, Winder mode: gap/contact, Roll delivery: 3-axis robot. Including non-stick rollers, linear guide, scale, robot and core magazine. Documentation available. On-site inspection is possible. Isdovripyjpfx Ahyjbc

Condition: good (used), Three-roll bending machine, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll bending machine, profile bending machine, three-roll sheet metal rolling machine, manual bending machine -Manufacturer: Carl Kneusel, 3-roll bending machine, hand-operated -Max. sheet width: 1020 mm -Max. sheet thickness: mm Ibodpez A S Srofx Ahysc -Roller diameter: 55 mm -Dimensions: 1670/580/H1150 mm -Weight: 156 kg

Condition: good (used), Year of construction: 1989, sheet width 2050 mm plate thickness 8.0 mm Iodpfxoz Dkzhs Ahyebc pre-bending capacity 6.0 mm upper roll diameter 190 mm lower roll diameter 180 mm bending speed 5.2 m/min work height max. ca. 980 mm total power requirement 5.5 kW weight of the machine ca. 3500 kg. range L-W-H 2900 x 1200 x 1280 mm Furnishing: - Robust electro-hydraulic 3-roller bending machine - planetary movement of the bending rollers with reduced center distance - Hydraulic motors combined with planetary gears * for driving the 3 rollers - mobile operating unit, with connection cable + plug - extended roll ends for profile bending rolls - with conical bending device * Inclination of the side rollers by handwheels * Workpiece limitation for a cone with a 45° pitch: * Working length max: 60% * Bending capacity max: 50% - free-moving operation * electric delivery rollers * electric turning/rolling movement * digital position display of the reels - hardened rollers SAE 1050 CK 45 - Hydraulic folding store for removing closed pipes - safety device (cable) - Original instruction manual + CE declaration * Machine link : ?machineno=1008-9401255

Condition: used, Year of construction: 1997, machine/vehicle number: 707, Ingramatic thread rolling machine RP21 RV, year 97, used Ibsdewiu Afopfx Ahyoc

Condition: new, sheet width 2070 mm plate thickness 4 mm distance between columns 2100 mm diameter of upper rolls 140 mm weight of the machine ca. 0,37 t Iodpofv H A Ujfx Ahysbc

Year of construction: 1992, condition: used, Two Multivac thermoforming packaging machines are offered. 1) Multivac R7000 MC90, year of manufacture: 1991, supply voltage: 380V, frequency: 50Hz, rated power: 10kW. 2) Multivac R7000 MC, year of manufacture: 1992, supply voltage: 380V, frequency: 50Hz, rated power: 12kW. Inspection possible by appointment. Ijdez Rn Dhopfx Ahysbc

Condition: used, Year of construction: 2019, Lippelt Mini Rustica Touch GST roll production line Suitable for the production of ciabatta and corner/special rolls Dough throughput up to 300 kg per hour Year of manufacture: 2019 Condition: inspected and cleaned Stainless steel cover Touchscreen control with recipe management Equipped with a guillotine and forming die Cutting station, type: Rumo 7 Includes 3 cutting rollers (for 1-4 row production) Includes 2 stamping dies Further accessories available upon request. Isdpfoz A Sidjx Ahyebc

Condition: used, Year of construction: 1987, rolling capacity max. NA t workpiece diameter 38 mm workpiece length 500 mm total power requirement 24 kW weight of the machine ca. 10 t dimensions of the machine ca. m Max.Ø tool slide stroke 760 mm Max.Ø rack length 610 mm Length of workpiece between centres, approx. 500 mm Max. tooth width / profile width 92 mm Max. workpiece Ø 38 mm Tailstock stroke on outboard support, hydraulic, approx. 500 mm Ibodpfx Aet Hw D Dshyoc Module range 0.3 - 1.3 Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. * Originally, external gears were formed on the machine using pinion cages (no. of teeth = 25), Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long. * Various accessories: * Separate switch cabinet. * Separate hydraulic unit, 900 l. * Coolant device in the machine. * Control panel with malfunction message in plaintext, etc. Roto Flo machines are ideal for mass production of smaller gears/profiles. The coldforming process is a lot faster and more economical than other chip removing methods. Workpieces are clamped between 2 live centres and 2 synchronous opposed directional coldforming racks simultaneously engage the workpart and start rotation. During rotation, the profile is formed successively within one stroke. In the calibrating zone, the profiling and surfacing performance of the tool are optimised. Profiles do not require a run-out. The coldforming process requires a rigid and heavy duty construction of the machine, which ensures the required precision over the years. Between 25,000 and 100,000 working cycles can be performed with one set of racks, also for serrations. Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: used, Year of construction: 2022, Lippelt Mini Rustica Touch GST roll production line Suitable for the production of ciabatta and corner/special rolls Dough throughput up to 300 kg per hour Year of manufacture: 2022 Condition: inspected & cleaned Stainless steel housing Touchscreen control with recipe management Equipped with a guillotine and shaping die Saw station, type: Rumo 7 Ibjdpfsz A Ryhex Ahyec Includes 3 cutting rollers (for 1-4-row production) Includes 2 stamping dies Additional accessories available upon request.

Condition: used, Year of construction: 2016, Roll production line, combination type WP Multimatic MUS Selecta Modular V60 Combination Isdpfxjz A Ryzo Ahysbc Year of manufacture: 2016 Condition: refurbished, immediately ready for use Operating hours: 12,200 h Dough divider and rounder, type: Multimatic MUS, 5-row 3/4/5-row combined roll production line for the production of shaped rolls and long rolls, sliced and unsliced Working width: 600 mm Weight range: 35-85 g (piston diameter: 50 mm) Hourly output: 6,000 pieces Proofing time: 12 min Dough sheeter for Kaiser rolls, braids, pressed rolls, etc. "Green operation" without proofing cabinet with direct depositing possible (e.g., for Berliner doughnuts) Output in "green operation", theoretically max. 10,000 pieces per hour Adjustable flour spreader Exhaust fan for correcting the proofing chamber climate Optional dryer and stiffening fan Programmable depositing

Condition: used, Year of construction: 2018, Roll production line König Mini Rex Futura G2000 Year of manufacture: 2018 Compact system G2000-K2 with Mini Rex Futura head machine Compact proofing cabinet with an hourly output of approximately 2,500 pieces For higher output without proofing cabinet operation, Mini Rex Futura, swiveling, up to a maximum of 4,000 pieces/hour Dies for round and square rolls Isdjz A Rzropfx Ahyjbc Die size: SKG63 and RK64 Weight range: 40-105 g Lateral discharge conveyor Proofing time approx. 6 min at an output of 2,000 pieces/hour Docking device including one docking tool of your choice, subject to availability Integrated infeed conveyor

Condition: new, Shaft diameter: 580working speed: 3-6motor power: 30length: 2760width: 2310heigth: 2680weight approx.: 14400 Technical specifications: Welded steel construction frame Iedpjh Alh Hjfx Ahysbc 3 rollers are driven Hardened and ground shafts made of high-strength special steel Rollers are hardened and ground Horizontal and vertical working position Hardened standard rollers Mobile control panel Angular side guide rollers Brake motor equipped for precision bending Digital displays (2 pieces) Options: Digital display STANDARD NC unit 10 screen EURO 11,500.00

Condition: used, Technical specifications: Number of rollers: 3 Roller size: 120 x 60 mm Maximum stroke: 20 mm Number of speeds: 8 Distance between the first and last roller: 286 mm Distance between rollers: 133-153 mm Motor power: 0.75 kW Motor speed: 1400/2800 rpm Feed rate: 2-4-5.5-6.5-11-13-16.5-33 m/min. Iedozvm Rfopfx Ahyobc

Condition: as good as new (ex-display), Year of construction: 2022, 1550 mm 2,0 mm 1,5 mm Ibsdpfexcuxdex Ahysc roll diameter oben 90 mm 560 kg 2580 x 700 x 1250 mm mm - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment

Condition: new, Shaft diameter: 480working speed: 3-6motor power: 22length: 2500width: 2200heigth: 2300weight approx.: 9300 Technical specifications: - Steel construction welded frame - 3 Rolls are powered - Hardened and ground shafts made of high tensile special steel - Rolls are hardened and ground - Horizontal working position - Hardened standard rolls - Mobile control panel - 3 Axis mechanical lateral angle guide rolls - Brake motor equipped for the precision bending - Digital Read-Outs (2pcs) Options: - Digital Readout STANDARD - NC Unit 10 Screen  EURO 11.500,-- Iodpfx Ahjh Alh Roysbc

Condition: used, total length: 7,800 mm, total width: 1,700 mm, total height: 1,580 mm, Year of manufacture: 2005 Colour: Green Empty weight: 11.000 kg Price: On request - Year: 2005 - Documentation available: No - CE certificate present: No - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 2 - Max. sheet thickness [mm]: 12 - Max. prebending thickness [mm]: 10 - Max. working width [mm]: 2500 - Top roll diameter [mm]: 360 - Bottom roll diameter [mm]: 300 - Transport dimensions: 7800mm x 1700mm x 1580mm (l x w x h) - Transport weight [kg]: 11000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Ibsdpfxjzkkrvs Ahyjc Lukas van Rossum

Condition: used, Year of construction: 1999, sheet width 2050 mm plate thickness 4 mm Ijdsztfxiopfx Ahyebc total power requirement 3 kW weight of the machine ca. 2 t

Condition: ready for operation (used), Year of construction: 1992, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 3200 kg range L-W-H 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine Ibsdpfx Ahjxacdvsysc - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: used, shaft length under head: 80 mm, thread length: 58 mm, GW 63 / GW 63SX flat-die thread rolling machines, various models, good condition, top-of-the-line electrical system EW Menn including vibratory feeder, Skako, and slide conveyor Isdpfxjwkqvqo Ahyjbc

Condition: new, sheet width 1070 mm plate thickness 2,0 mm distance between columns 1100 mm diameter of upper rolls 76 mm total power requirement 1,1 KW weight of the machine ca. 0,37 t dimensions of the machine ca. 1,8 x 0,8 x 1,3 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Upper and lower roller driven, feed roller without drive - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation Ibodpfx Aofv A Etjhysc - 400 volts - CE certificate

Condition: used, Year of construction: 2021, gebraucht 2021 9502 Türkei 2200 € 1 1050 mm 2 mm 75 mm 1930 mm 700 mm 1160 mm 300 kg MINT CONDITION Ibsdpfewiquqjx Ahyjc 3 rolls asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: M50E/9046, Offer Number: M50E/9046 Machinetype: hot rolling machine Make: SKF Type: EMB 110 Constr. year: 2001/2021 diameter range: 110 mm max. outside dia. of round pieces: 110 mm kind of heating: 335 KW Ijdpfx Aow Nxiujhyobc Location: Europe

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Equipment: documentation/manual, ORT Italia Netting Machine CE certified Model RP 18/U Year 2012 Siemens SIMATIC OP17 CNC control panel Reference: F24 Ibjdpfszb Imajx Ahyjc €8,500, as is

Condition: used, Technical details: sheet width: 1080 mm plate thickness: 1,25 mm distance between columns: 1200 mm dimensions LxWxH: 1,9 x 0,6 x 0,9 m weitere Merkmale: 2x Biegewalzen: -Ø 63 x 1080mm -die Oberwalze ist ausschwenkbar -die Unterwalze hat einen Verstellweg von 12mm Isdpfx Ahsu Icdyjyebc -Antrieb manuell über Handkurbel 1x Laufwalze: -Ø 63 x 1080mm -mitlaufend -Verstellweg ca. 5mm *