Used Teknamotor Wood Shredder for sale (6,599)

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, power: 45 kW (61.18 HP), overall weight: 4,700 kg, color: grey, Maximum chipping height: mm 200 Feed-in width: mm 650 Feed rollers: units 3 Rotor fly circle: mm 600 Chip length approx.: mm 20–30 Output capacity: 18–22 cubic meters/hour of wood chips Chipping knives: units 2 Hjdpfx Ajynzg Hek Dsl Feed motors: kW 2 x 3 Net weight approx.: kg 4700 Feed: horizontal Machine frame: steel, gas-shielded welded Rotor: steel, gas-shielded welded, dynamically balanced Bearings: oversize roller bearings Bearing housing: steel, flange housing Feed rollers: steel, special toothed Chip discharge: located below the machine Machine grate: (sieve) for post-shredding of oversized pieces Drive pulley: matched to main motor, N = 1500 rpm Hydraulic system: comprising hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting the upper feed roller Feed system: by 2 geared motors, manufacturer NORD GETRIEBE

Condition: used, Year of construction: 2019, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, Crusher/chipper Vecoplan VHZ 1300, hammer mill CPM, fan and cyclone filters JFK. The machine is in good condition, has only been in operation for about 50% of one year. The line is complete with all conveyors. Hjdpfx Aeympx Uok Djl

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, power: 18.5 kW (25.15 HP), color: blue, Shredder Type GHZ 600 Factory overhauled, V-rotor Feed width: 300 mm Maximum feed height: 70 mm Working width of rotor: 300 mm Rotor diameter: 252 mm Rotor speed: 600 rpm Cutting system: 14 knives, 40 x 40 mm Screen perforation: 25 mm Control cabinet: fully wired, incl. 5 m cable Motor output: 18.5 kW Electrical connection: 400 V +/- 5% / 50 Hz Extraction port Ø: 200 mm Overall dimensions approx.: L = 1,800 mm, W = 1,230 mm, H = 1,640 mm Weight: approx. 1,300 kg Includes: • PLC electrical control (Moeller / Siemens); star-delta starting • Load-dependent material feed via top-mounted feed roller • Machine frame on anti-vibration rubber mounts • Patented V-rotor with milled knife pockets in the profile • Welded knife carriers and bolted knives with recessed knife screws • Machine prepped for on-site extraction system (extraction port Ø 200 mm) Hedpfx Aeymb Ubok Dsl

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, power: 18.5 kW (25.15 HP), color: blue, Shredder Type GAZ 62 with G-Rotor Factory overhauled, new wear parts Hedpfx Ajx Eb Tmek Dol Feeding opening: 620 x 820 mm Hopper volume: 0.65 m³ Rotor diameter: 248 mm Rotor working width: 600 mm Rotor speed: 80 rpm Cutting system: spiral rotor; 26 knives, 30 x 30 mm Screen perforation: 10 mm or as required Control cabinet: fully wired, incl. 5 m cable Motor power: 18.5 kW Hydraulic motor: 0.75 kW Connection power: 400 V +/- 5% / 50 Hz Suction nozzle diameter: 160 mm Overall dimensions approx.: L = 1,800 mm, W = 1,230 mm, H = 1,640 mm Weight: approx. 1,300 kg Including: - Automatic star-delta start - Automatic shut-off in idle mode - Vibration-damping machine feet

Condition: new, Year of construction: 2026, Engine power 18,5 kW rotor diameter 248mm Number of cutting edges 17 pieces indexable inserts Hedpenzh T Tofx Ak Dsl Feed opening 624 x 792mm Suction nozzle 160mm left or right suction possible weight approx. 1300 kg Perforated screen 15/20mm Outer dimensions approx. 1740 x 1220 x 1670mm LxWxH

Condition: ready for operation (used), functionality: fully functional, For Sale: Massey Ferguson 7726 + MUS-MAX WT9XLZ Wood Chipper Package price: EUR 135,000 (excl. VAT) _____ 🚜 Massey Ferguson 7726 • Year of manufacture: 2017 • Engine hours: 8,170 Hodpsylv Rzjfx Ak Dsl • Price: EUR 60,000 (excl. VAT) • Power: 255 hp rated / 280 hp max • Front linkage • Front axle suspension • Air-suspended comfort operator seat (360°) • Regularly serviced • Engine oil changed every 250 hours • Transmission: Dyna-6, 50 km/h • Load-sensing hydraulic pump: 200 l/min • 4 double-acting hydraulic outlets with mechanical control • Rear fender lift control • Electronic Linkage Control (ELC), 9,950 kg lift capacity • PTO: 540 / 1000 rpm • Air brake system for trailer _____ 🌲 MUS-MAX WT9XLZ Wood Chipper • Year of manufacture: 2009 • Operating hours: 12,170 • Wear parts replaced regularly • New tires • Tower-mounted camera • Additional LED lighting • Fully operational – still in daily use

Condition: excellent (used), Gross Gaz 102 shredder/chipper 22 kW motor, rotor length 1020 mm, 50 knives on the rotor, hydraulic drawer, 15 mm screen, Hodoylav Uepfx Ak Dsl autoreverse, loading hopper inlet 1020 x 1500 mm The machine is in very good condition and fully performs its functions.

Condition: new, Year of construction: 2026, production time appr. 4 months * for suction perception, see picture 4 and 5 Tariff number: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 ph including turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3ph Knife: 76 pieces, rotatable Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control: PLC Siemens S7-1200 Funnel opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 square meters hydraulically operated slide Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (lxwxh) approx. 2765 x 2520 x 1730 mm Turbo coupling Included as standard: - V-rotor for other throughput - 2nd row of knives on the rotor - Control cabinet with Siemens PLC control - automatic star / delta start - fast hydraulics - Automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput Hodpfx Asd Hkqhek Dol - Clock control to avoid idle times - Performance-increasing step control of the hydraulic slide - Pertinax guides for hydraulic slides - anti-vibration machine feet - CE conformity The shredder is for shredding natural wood, chipboard and MDF board other materials after testing and approval by the manufacturer Recognition from the raw material: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc. Interests to interests wear

Condition: new, Year of construction: 2025, The ideal machine for shredding hardwood and softwood Another machine now available (ex-works Neckartailfingen). Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blades: 14+2 pieces, 40x40mm, reversible multiple times, Rotor diameter: 260 mm, Control system: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hodpfx Aksd E R D Ss Djl Hopper volume approx. 0.6 cbm, Hydraulically operated pusher Screen perforation of your choice (12 - 40mm) Extraction socket Ø 160 mm Weight approx. 1,300 kg Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm The following options are available at an additional cost: - Additional row of knives + €1,990 net (28 instead of 14) - Surcharge for segmented floor, 4-sided + €2,170 net (prevents the pusher from jamming. Recommended for materials with a thickness of less than 3 mm) - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control system for the conveyor belt and overband magnet + €2,750 net (start and stop synchronized with the shredder) - Special bearing + €1,540 net (rarely required. Closed, even more robust rotor bearing. May be considered for screens smaller than 15 mm or high fine content. Not necessary if bearings are greased approximately every 2 weeks in operation) Requirements for raw material: - The moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. increase wear. We are happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight company and we will document the test with photos and videos.

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 55 h, Machine with special rotor Available immediately Benefits: + Special rotor with reduced knife protrusion, suitable for hard and soft materials + 22 kW motor + Efficient square knives *For pallets: up to a maximum of 10 pallets per hour *Rate depends on screen size and material. Significantly higher throughput with smaller wood residues. Motor: 22 kW; 400 V - 50 Hz - 3 phase Screen: 15/20 mm or according to agreement (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) *can be changed Suction connection Ø 200 mm Feed opening: 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: plant color may differ Weight: 1920 kg Standard scope of delivery includes: - Control cabinet with PLC control - Automatic star-delta start - High-speed hydraulics - Auto shut-off when rotor is idle - Speed 70–90 rpm for high throughput - Cycle control to prevent idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at an additional cost: - Increase shredder height by 30 cm (preparation for conveyor belt) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €5,980 net - Control system for conveyor belt and overband magnet + €2,750 net (start and stop synced with shredder) - Enlarged hopper attachment 1500x1500 mm + €3,480 net Raw material requirements: Hedox Af Rdspfx Ak Dol - Moisture content (atro) must be below 25% - Feed must be free from metals and mineral contaminants. Tool damage and/or increased wear may result otherwise.

Condition: used, Year of construction: 2023, operating hours: 600 h, functionality: fully functional, power: 55.16 kW (75.00 HP), overall weight: 3,500 kg, The BBT 400 Woodzilla is a compact, powerful, and mobile drum chipper with aggressive feed, mounted on a 3.5-ton tandem trailer chassis and capable of 360° rotation. Technical Data Year of manufacture: 2023 Operating hours: approx. 600 hours Power: Diesel, Deutz TCD 2.9, 55 kW (75 HP), Stage 5 Feed opening: 320 x 500 mm Drum size: 400 x 500 mm, 4 knives Maximum log diameter: 32 cm Stabilisation: 4-way hydraulic support Z-crane Ben-Tele 550 Crane outreach: 5,500 mm Telescopic stroke: 1,100 mm Radio remote control for chipper and crane Brake system: Overrun brake Weight: 3,500 kg The machine is in good visual and technical condition. Location: North Rhine-Westphalia Availability: by arrangement Warranty: The machine is sold as-is at the time of delivery. The seller assumes no liability for defects. We reserve the right to prior sale, modifications, and repairs. Hjdpoykzlzefx Ak Dsl Didn't find the right machine? Please contact us!

Condition: new, Year of construction: 2025, Year of manufacture: 2025/2 Engine power: 18.5 kW Speed: 90 1/min Weight: 1.3 tons Rotor lengths: 600 mm Rotor diameter: 252 mm Rotor knives: 28 pcs Funnel: 600 x 1050 mm with an extra-ribbed sliding plate Hjdjvw Tw Eopfx Ak Djl

Condition: new, Year of construction: 2025, Year of manufacture: 2025/2 Hsdpforq Eu Rsx Ak Dsl Engine power: 18.5 kW Speed: 90 1/min Weight: 1.3 tons Rotor lengths: 600 mm Rotor diameter: 252 mm Rotor knives: 28 pcs Funnel: 600 x 1050 mm

Condition: new, Year of construction: 2025, functionality: fully functional, SONDERANGEBOT! AUSVERKAUF! Neu mit Garantie Die Hammermühle MT-500 ist zum Zerkleiniern von Holzspänen, Sägemehl und Getreideabfällen konzipiert. Die Basis von Hammerbrechern ist ein Rotor mit darauf montierten Schlagelementen (Schläger, Hämmer). Hedpowi Itkefx Ak Djl MT-500 Schlagmühle – Hauptvorteile Einstellbarer Mahlgrad des Materials; Die geringe Größe des Brechers ermöglicht den Einsatz auch in kleinen Räumen; Niedriger Energieverbrauch bei hoher Effizienz; Es ist nicht erforderlich, eine spezielle Basis zu bauen; Schneller Austausch von Sieben und Hämmern bei Bedarf; Möglichkeit der Zusatzausrüstung mit Zyklon; Zuverlässigkeit und Nutzungssicherheit; Option mit Zyklon +940 EUR Europäisches Produkt direkt vom Hersteller, Garantie, Ersatzteile verfügbar. Nettokaufpreis mit USt.Id.Nummer. Selbstabholung oder Lieferung nach Vereinbarung. Es besteht die Möglichkeit, die Maschine vor dem Kauf zu besichtigen und zu testen. Ich freue mich auf Ihre Anfragen.

Condition: new, Year of construction: 2026, Aluminum Angled Conveyor Belt with Substructure including adjustable feet and machine feet for leveling uneven surfaces Horizontal section: 2,500 mm Inclined section: 6,000 mm Incline angle at the bend: 45° Height of the horizontal section: 350 mm Total conveyor length measured on the floor: 6,750 mm Discharge height at the end of the conveyor: 4,500 mm Design: Aluminum construction - Double profile reinforced 90x45 mm - Full-surface discharge sheet 2.0 mm galvanized Drive drum and return drum S235 steel, welded and machined Ø100x620 mm crowned and turned, shaft fixed with pillow block bearings. Drive: Shaft-mounted gear motor 1.10 kW, belt speed: 0.53 m/sec Electrical connection 230/400 V, 50 Hz, IP54 protection class Drive supplied ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU including wave edge PU petrol matte Belt width: 600 mm Hjdpfsyhzhzex Ak Del 2 pcs wave edges 50 mm high, 25 mm wide, high-frequency welded 42 pcs T-40 cleats, 400 mm long, approx. 401 mm spacing Belt material: 2-ply, highly cross-stable In the bend area, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on both sides. Due to the wave edges, the usable belt width is reduced: Usable width: 300 mm, as follows: (top view) cross section 70+25+5+400+5+25+70 mm Special features: Belt guidance via PVC wedge strip on the running surface profile - 10x6 mm - Including widened substructure for improved stability against top-heaviness - Including cut-out in the discharge sheet - Including sliding guides in drive and return drums - Including magnet-free zone in the area of the overbelt magnet separator - Including bracket for DMPM1200 in the inclined section Discover customized solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailor-made solutions for the recycling, food, and further processing industries. Our comprehensive product portfolio includes everything from conveyor belt systems, flat conveyors, inclined conveyors, and angled conveyors to Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnet separators, drum magnets, and dosing bunkers – all custom-built to our customers' specific requirements. We understand that each industry and project is unique. That is why we individually adapt our solutions to your specifications and requirements. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. For us, there are no special designs – we find the right solution for every challenge! Put us to the test! Contact us and discover how we can transform your requirements into bespoke solutions. Let’s shape the future of your production processes together! Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnet separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grates, metal separator, block magnet, filter systems, dosing hoppers, feed hoppers, filling systems

Condition: new, Year of construction: 2026, Aluminum angled conveyor with substructure Including adjustable feet as well as machine feet for leveling uneven surfaces Horizontal section: 3,500 mm Inclined section: 2,100 mm Inclination angle at bend: 45° Total conveyor length measured on the floor: 5,000 mm Discharge height: 2,000 mm Height of horizontal section: 500 mm Design: Aluminum structural construction - Triple-reinforced profile 135x45 mm - Full-surface discharge sheet 2.0 mm, galvanized Drive drum + tail drum made from S235 steel, welded and machined Ø150x820 mm, crowned, shaft mounted in plummer blocks. Drive: Shaft-mounted gear motor 1.1 kW, belt speed 0.77 m/sec Connection 230/400V, 50Hz, protection class IP54 Drive prewired to motor terminal box (Commissioning must be performed by qualified electricians) PVC conveyor belt DM 15/4 0+007 PVC including PVC wave edge, green Belt width: 800 mm 2 pcs. wave edges, 80 mm high, 50 mm wide, high-frequency welded 32 pcs. T-50 cleats, approx. 355 mm spacing Belt material: 2-ply, especially cross-stable At the bend, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on each side. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 490 mm, calculated as follows: (top view) transverse arrangement 100+50+5+490+5+50+100 mm Discover custom solutions for your industry! Hodpfxsyhzhus Ak Djl As an innovative mechanical engineering company, we are proud to offer tailored solutions for the recycling, food, and processing industries. Our extensive product portfolio ranges from conveyor systems and flat conveyors to incline conveyors, angled conveyors, and Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnetic separators, drum magnetic separators, and dosing bunkers – all according to our customers’ specific requirements. We understand that every industry and project is unique. That’s why we customize our solutions to your individual needs and specifications. Complex projects are an exciting challenge for us, and we look forward to working with you to develop innovative solutions. With us, there is no such thing as a special solution – we find the right solution for every problem! Challenge us! Contact us and discover how we can transform your requirements into customized solutions. Together, we will shape the future of your production processes! Conveyor, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grate, metal separator, block magnet, filter systems, dosing bunker, feed bunker, filling systems

Condition: new, Year of construction: 2026, functionality: fully functional, Aluminum Z-conveyor belt with base frame, including adjustable feet and freely swiveling transport castors with parking brakes. Horizontal section: 800 mm Inclined section: 3,000 mm Second inclined section: 1,200 mm Angle of incline at each bend: 60° Total conveyor belt length measured on the floor: 3,500 mm Height of the horizontal section: 400 mm Design: - Aluminum construction with 2x reinforced profile, 90x45 mm - Full-surface discharge sheet, 2.0 mm, galvanized - Drive roller and deflection roller made from welded and machined S235 steel Hsdoyhzhnjpfx Ak Djl - Ø100x720 mm crowned turning, shaft fixed with pillow block bearings Drive: Parallel shaft geared motor 1.10 kW, belt speed: 0.53 m/sec Connection: 230/400V, 50 Hz, protection class IP54 Drive wired ready for connection up to the motor junction box (commissioning must be performed by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU, including wave edge PU, petrol matt finish, AS, especially cross-rigid with hard cover Conveyor belt width: 700 mm 2 pcs. wave edges, 50 mm high, 25 mm wide, high-frequency welded 34 pcs. T40 cleats, centered, 430 mm long, spacing approx. 299 mm Belt material: 2-ply, especially cross-stable At each bend, the belt is guided on both sides with 3 hold-down rollers each. The belt is manufactured with a 70 mm edge-free zone on each side. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 500 mm, determined as follows: (top view) Cross-section 70+25+5+500+5+25+70 mm Belt guidance via PVC V-guide on the running surface, profile 10x6 mm - Includes cut-out in the discharge sheet - Includes slide bushings in the drive and deflection rollers

Condition: good (used), Year of construction: 2004, operating hours: 15,660 h, functionality: fully functional, color: orange, For sale: Doppstadt DZ 750 Kombi – slow-speed shredder + high-speed chipper. The machine is accident-free. - Year of manufacture: 12/2004 - Mercedes-Benz diesel engine - Operating hours: 15,660 mth - Weight: 46 t - Magnetic separator - Possibility to use different shredding screens - Machine after inspection/service Hjdpfxjygr Tnj Ak Del - Tyre condition: 70% - Tyre size: 385/65R22.5 - Easy operation The machine is in continuous use. Please contact for further information.

Condition: new, Year of construction: 2025, power: 2.2 kW (2.99 HP), Holzspalter beschleunigen und erleichtern die Herstellung von Brennholz im industriellen Maßstab. Mit einer Leistung von 15 bis 30 m³ pro Schicht (8-Stunden-Arbeitstag) spalten sie alle Holzarten, einschließlich der Wurzeln alter Obstbäume. Jeder Holzspalter wird vor dem Lackieren und der Inbetriebnahme getestet, um höchste Qualität zu gewährleisten. Modell: DKPR-220 Spannung: 230 V Max. Stammdurchmesser zum Spalten: 500 mm Hjdpfxjwhw E Ts Ak Djl Max. Stammlänge zum Spalten: 600 mm Spaltkraft: 12 Tonnen Maße: 2200 × 1200 × 1200 mm Gewicht: 225 kg Motorleistung: 2,2 kW

Condition: like new (used), Year of construction: 2012, power: 18.5 kW (25.15 HP), Rotor 260 mm Feed opening approx. 630 x 830 mm Rotor length approx. 630 mm Motor: 18.5 kW Number of knives: 30 Screen present Overhaul: - new motor incl. installation - new slide guide rails Hsdpfx Asyfw D Nek Djl - calibration of the slider - new knives - new counter knives - completely new rotor - hydraulics checked / wear parts replaced - new flange bearing UCF 214 - new paintwork - adjustment / test run

Condition: excellent (used), functionality: fully functional, motor power 7.5 kW hydraulic pressing drawer Hjdpfsydpwrex Ak Djl hydraulic pump motor power 1.5 kW hopper dimensions 870x425 mm screen 15 mm container with opening sensor CE marking technical documentation year of manufacture 1996

Condition: good (used), 380V Hsdjydf Dbjpfx Ak Djl 22kW

Condition: used, Twin-shaft shredder Manufacturer: Fransson Weight: 1500 kg Hsdpoycv Uhefx Ak Dsl Mouth width: 750 mm x 680 mm With sieve Mesh diameter 50 mm Capacity: from 20-50 m3 per hour Equipment after repai

Condition: new, Technical specification: Funnel opening: 600x800mm Funnel capacity: 0.6m³ Rotor working width: 600mm Rotor diameter: 252mm Drive power: 15kW Rotor speed: 90 rpm. Number of knives: 14 pieces + 2 pieces Type and size of knives: concave / 40x40 mm, Cutting crowns concave / 30x30mm, clearing knife Screen perforation: 15/20mm Paint: HoKu Tech Standard RAL5010/7016 Connection value: 400V +/- 5% / 50Hz Includes: Control cabinet with 5 m cable Electrical control (PLC Siemens) Hedpfx Akevyp Avo Dol Star-delta start-up Rubber vibration elements E-rotor with knife pockets milled into the profile Gear limit switch 1st row of knives Holder on the slide for long and large parts Large 40x40mm knives for optimal material feed Very robust gearbox Special clearing knife to prevent jamming at the side

Condition: new, Year of construction: 2026, Weima single shaft shredder type WL 6 Power 18,5 kW Our machine concept WL 6 The Weima high performance shredders with their flexible can process all kinds of wood materials (hardwood, softwood, chipboard, MDF materials softwood, chipboard, MDF materials, plywood, veneer residues etc. ) into and, in the case of bulky materials, achieve an enormous volume reduction of the material. enormous volume reduction of the material. Mode of operation: The machine is equipped with a large hopper and can be fed by a conveyor belt or by hand. fed by means of a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost effective and cost effective material feed without the need for manual assistance. manual assistance. Vqwemi Technical specification WL 6 / 18,5 kW Hopper opening: 800 x 1.000 mm hopper capacity: 0,9 m³ working width of the rotor: 800 mm diameter of the rotor: 252 mm Driving power: 18,5 kW Rotor speed: 80 -120 rpm Number of knives: 42 pieces type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Sieve perforation: 10-60 mm possible (standard 15-20 mm) Painting: WEIMA standard RAL 2002 / 7016 connected load: 400 V +/- 5% / 50 Hz weight: approx. 1.600 kg Included: - Switch cabinet ( Rittal ) incl. electrical control ( Moeller / Siemens ) and star-delta start-up - Rubber oscillating elements - V - rotor ( patented ) with knife pockets fixed in the profile Hedpsh Eiw Iofx Ak Djl - gear limit switch - On