Used Technica 4298-950 for sale (1,511)

Condition: good (used), Three-phase motor, electric motor -Power: 3 kW -Speed: 950 rpm -Shaft: Ø 28 x 80 mm Gjdpfjdzymcsx An Rjit -Design: B3 -Dimensions: 440/320/H270 mm -Weight: 60 kg

Condition: good (used), Year of construction: 2007, functionality: fully functional, power: 7.63 kW (10.37 HP), total width: 2,300 mm, total length: 4,000 mm, total height: 3,000 mm, type of input current: three-phase, pressure: 6 bar, input voltage: 400 V, nominal heat output: 950 kW (1,291.64 HP), operating pressure: 6 bar, Equipment: hot water, type plate available, The Pyrtec boiler system is an underfeed stoker combustion unit with internal grate and burnout grate for universal application, and is suitable for a particularly wide fuel spectrum, ranging from dry wood waste to wet forest wood chips. Maximum water content w= 50%, corresponding to a wood moisture u of 100%. The complete boiler system is type-approved (Approval No.: 02-221-512) with continuous quality control by TÜV and consists of the following components: FEED AUGER WITH BACK-BURN BARRIER LAYER: The feed auger transports the fuel into the combustion chamber and the grate area of the fireblock. The robust auger flights are made from heat-resistant chromium steel in the combustion chamber area. The feed tube is equipped with mounts for the back-burn thermostat and the thermal extinguishing valve. Above the auger is a dosing container with a photoelectric sensor for level control of the fuel barrier layer required by TRD 414. The drive is provided by a maintenance-free helical gear motor and chain drive enclosed in a dust-tight chain guard. Accessoires: Extinguishing valve with dirt strainer COMBUSTION BLOCK: Solid combustion block with multiple layers of insulation and high-quality chamotte lining. The feed and grate area consists of the fire chamber, gasification grate, and descending burnout grate. All of these components are made of highly heat-resistant cast steel (Material No. 1.4868), at least 12 mm thick and individually replaceable. This type of primary combustion system has proven to be extremely effective even with challenging fuels (wet sawmill residues, high bark content, etc.). Ash and foreign substances falling through the grates can easily be removed from outside through access holes sealed with covers. The horizontal combustion chamber is optimally shaped for complete burnout and also provides a large ash compartment. The combustion chamber door is heavy-duty, well-insulated, and can be ideally swung aside on a robust double-joint hinge for maintenance purposes. BOILER: Horizontal hot water boiler in three-pass design, mounted on the fireblock, insulated and stylishly clad. The insulated boiler front door is designed to allow the installation of an oil or gas burner. Operating temperature: max. 120 °C Operating pressure: 3.0 bar Test pressure: 6.0 bar FLUE GAS DUST COLLECTOR PYRTEC-140 to PYRTEC-650: Gsdpfx Ajxwhw Ajn Rjit Constructed in axial cyclone design, fully insulated and mounted to the boiler. Equipped with two insulated cleaning covers, an ash container with quick-release fastener, and mounting flange for the flue gas fan. FLUE GAS DUST COLLECTOR PYRTEC-1000: Constructed in axial cyclone design, fully insulated, free-standing for optimal placement. Includes two insulated cleaning covers, mounting flange for the flue gas fan, and connection for the ash container. FLUE GAS FAN: Specially designed fan for wood combustion operation, very quiet, with a heavy-duty, heat-resistant motor and flexible heat-dissipating hub. The fan housing can be continuously rotated at the intake, with a round exhaust outlet.

Year of construction: 2011, condition: excellent (used), CTS Type: T-30/950 Ex/I CTS Temperature Test Chamber, Explosion-Proof Control – 32-bit controller LCD control panel Digital display for set and actual values Numerical input of set values Error messages in plain text RS 232 interface Free switching channels for product-side test specimen activation Temperature Testing: Temperature range: -30°C to +80°C Temperature deviation: ±0.3 K over time Temperature change rate: Heating: 2 K/min Cooling: 1.5 K/min down to -10°C Thermal radiation: approx. 1000 W at +20°C Godpfjihb Amjx An Roit approx. 200 W at -25°C Nitrogen inerting with residual oxygen monitoring With nitrogen inerting, the test chamber is first purged with a large flow rate of N2 until the o2 content drops below 3%. Then, it switches to a base flow amount (approx. 10% of the large flow rate). The nitrogen flow for the base amount is measured and displayed using a flowmeter and monitored via a limit switch. O2 monitoring continuously extracts gas from the test chamber via a flame arrestor and passes it over an O2 sensor which checks the residual oxygen content of the extracted air. Afterwards, the gas is returned to the test chamber via a second flame arrestor. The extraction pump is monitored by a volumetric flow meter. Additional details can be found in the Dräger user manual in the appendix. The gas system is currently deactivated! All technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without irradiation, and without additional equipment. Dimensions: Test chamber volume: 950 liters Test chamber dimensions: Height approx. 700 mm / Width approx. 900 mm / Depth approx. 1500 mm External dimensions: Height approx. 2400 mm / Width approx. 1270 mm / Depth approx. 3125 mm Operating data: Electrical connection: 400V +6/-10 %, 3/N, 50 Hz Nominal power: 21.6 kW Rated current: 36.5 A Protection class: IP 54 Condensate drain: non-pressurized, R 1/2" inner thread Sound pressure level:

Condition: good (used), Reel, unwinding reel, winding reel, unwinding reel, sheet metal unwinder -Reel: with 3 retaining brackets -Diameter: 950 mm -Reference: M20 shaft, dimensions see photos -Dimensions: Ø 950 x 410 mm -Weight: 35 kg Gsdjx Ifc Tepfx An Rsit

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Edges thickness in strips/lippings max) mm 1,3 Panels thickness (min/max) mm 10 / 45 Working width (min/max) mm 244 / 2300 ca. Numerical Control /Software ICOS Open Adjustable feeding speed (m/min ) 8 - 40 Without Transmission bar (Master & Slave system) Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 270 SIZING PART (for each side): Gedpfx Ajfi Tkvon Rjit Pre-Milling unit 75.30 (Kw 6,6 x 2) EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt system) 04.1570 + 283.205 Edge coils supporting unit (reels N°) 6 Snipping (end-cutting) unit 08.42 (Kw 0,2 x 2) 40 m/min Fine Trimming unit 08.055 (Kw 0,66 x 2) 0°-30° Multi Function Unit (Profile contour Trimming unit) MFA 08.342 (Kw 0,66 x 2) max 25 m/min Corner Rounding unit (Contour Trimming) 08.465 (Kw 0,18 x 4) max 20 m/min Buffing unit 08.617-2 (Kw 0,18 x 2) Free space

Condition: used, Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker Giedpjx D Uprefx An Ret -Tool cabinet: Steel cabinet with 4 shelves -Width: 950 mm -Depth: 500 mm -Height: 1950 mm -Door: lockable, without lock -Weight: 84 kg

Condition: good (used), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker Gsdpokyy Uxsfx An Roit -Tool cabinet: Steel cabinet without shelves -Width: 950 mm -Depth: 420 mm -Height: 2150 mm -Door: lockable, without key -Weight: 50.5 kg

Condition: new, power: 90 kW (122.37 HP), color: grey, Year of construction: 2026, 950 It is a fully mobile body, new stone crushing and screening plant GNR 950 Mobile Crushing and Screening Plant has a capacity of 160/240 TPH. It can easily break stones of different hardness. Godpswfnqusfx An Roit Complies with international shipping standards. Installation and commissioning is done in a short time. Local workers (staff) are taught how to control. Lifetime spare parts support is provided. OPTIONAL - By-pass system - Magnetic magnet - Generator System - Dust Removal System - Frequency Control System is used instead of soft starter - Control cabin and air conditioning Please call us for our other crushing plants and customized solutions.

Condition: good (used), Year of construction: 1990, operating hours: 12,332 h, functionality: fully functional, machine/vehicle number: 1684, total length: 5,000 mm, total width: 2,350 mm, total height: 3,500 mm, input voltage: 400 V, type of input current: three-phase, pressure: 7 bar, heating capacity: 63 kW (85.66 HP), operating pressure: 7 bar, BvL cleaning plant / washing system Hot wash system Chamber/trolley dimensions: 2200x800x900 mm Gijdpfx Anew Dpk Hs Rst Was in operation until 04/25, then cleaned and decommissioned. Will be dismantled in July 2025. Trolley for hanging parts is available. Various spare parts are available and included with purchase. See drawing and pictures. For further information, please feel free to contact me.

Condition: used, This listing is for a Amersham Biosciences AKTA Purifier 100 / FRAC-950 Fraction Collector Gjdpfx Ajxzgtqsn Rsit

Condition: used, KRONES AG Monoblock (with Sauerstein SD 1500/1100/950 unit and KRONES cooling device Manufacturer KRONES AG – Neutraubling, Germany Type Stainless-steel guarded industrial monoblock (in-line integrated unit) with process and cooling auxiliaries Industrial Applications KRONES in-line unit for automated packaging environments requiring a protected enclosure, continuous conveyor operation, and integrated auxiliaries. The configuration shown includes a Sauerstein air unit and a KRONES cooling device for thermal control of integrated equipment/cabinets. Main Technical Specifications Air unit (Sauerstein nameplate) - Brand: Sauerstein - Type: SD 1500/1100/950 - Reference (Kom.): 10.462 - Year (Baujahr): 01/10 Cooling device (KRONES nameplate – Kühlergerät) - Part-No: Serial-No: M6530292550 - Supply: 230 V, 50/60 Hz, 2~N - Rated / start current: 1.5 A / 3.2 A - Power input: 315 W - Cooling capacity: 320 W - Refrigerant: R134a, 96 g - Protection rating: IP54 / IP24 In/Out - Max pressure: PS35 / PO30 bar - Year: Fuse: 6 A T - Operating range (min./max.): 20 °C – 55 °C - Internal minimum setpoint: 35 °C - Weight: 13 kg - Manufacturing: Malta (European Union) - Markings: CE, cRUus Machine Usage This KRONES monoblock is an in-line integrated unit designed for industrial operation within a guarded enclosure. The identified auxiliaries provide process support functions, combining air handling via the Sauerstein module and dedicated cooling via the KRONES unit to maintain thermal stability of on-board equipment. Features / Differentiators - Guarded stainless-steel monoblock design suited for automated production areas. - Integrated KRONES cooling device with 320 W cooling capacity and R134a refrigerant, engineered for industrial duty (IP54). Giodpfx Ajx N Utdjn Rjt - Full traceability of auxiliaries through part numbers and serial numbers (Sauerstein SD 1500/1100/950, KRONES , M6530292550).

Condition: used, Make: MÖSSNER record Type: SSF /950 Design: 950mm Table size: 800x750mm Gisdpevtyv Hsfx An Rjt

Condition: good (used), Year of construction: 2019, CNC through-feed center with dual clamp drive in X-direction and gantry design in Y-direction. The second gripper enables trimming down to 15 mm as well as continuous milling movement along the X-axis. The workpiece length is measured (X-direction) via sensor measurement. Gsdpfx Anoxrahco Rsit Working area: X-axis: 3,500 mm Y-axis: 950 mm Z-axis: 80 mm Milling spindle 12 kW HSK-F63, up to 24,000 rpm max. 4-position linear tool changer for milling tools. Max. tool diameter: 120 mm Max. tool length: 100 mm Single pick-up station for ergonomic insertion or removal of tools into the machine. Additionally usable as extra tool positions for up to 11 virtual tools. Automatic length measuring system for tools in Z-direction. Drilling head DH 25 8H 1S - 17 vertical spindles - 8 horizontal spindles - Grooving saw in X-direction Dowel insertion unit with 2 tools Dowel diameter: 8 mm, lengths: 20-25-30-35 or 40 mm Air cushion tables at front and rear, foldable Machine software WOODFLASH with: - CNC Board (general machine operation) - Tool database (Tecno-Manager) - Programming editor External workstation license Dongle upgrade: 3D simulator with collision check for WOODFLASH at the machine Release of workpiece at the rear side of the machine Machine is supplied without tools and HSK holders

Condition: new, Year of construction: 2023, CAT950 Heavy Duty Bucket Gisdoqa Daxspfx An Rot For detailed information and quote, please contact us

Condition: new, Year of construction: 2024, CAT950L Heavy Duty Bucket sales from STOCK Edge Length: 2850mm Capacity: 3.5m^3 Welded adapter-teeth Gisdpfxjt Rqgtj An Ret

Condition: new, Machine: CAT950 Edge Length: 2850mm Capacity: 3.5m^3 Welded adapter-teeth Giodpfx Ansxf H Ebs Ret Bucket from STOCK

Condition: new, Shredding Shafts for Hammel VB 950, Arjes VZ 950, Lindner U95, Pronar MRW 2.10.10, Olnova 95DK Available in all configurations with side combs and breaker bars: - 6-8-8 - 8-8-8 - 6-10-10 - 8-10-10 - 10-10-10 - 12-10-10 PROTECHNIKA is a company with a 21-year history, specializing since its inception in the production of spare parts and complete recycling lines. In recent years, we have expanded our product range to include the manufacture of cutting shafts for slow-speed shredders. By implementing automated welding processes and our proprietary production technology, we have minimized production times while ensuring consistently high quality. Cutting shafts are a serial product, which allows us to collaborate with machine manufacturers as an OEM supplier. What sets PROTECHNIKA apart from the competition? It’s simple! - Certified 3.1 materials - TUV SUD Rheinland certified quality - ISO 9001 - Automated welding process / ISO 15613 / ISO 15614 Gedpsx Hhq Rofx An Roit - Welders certified to ISO 9606-1 - ISO 9001:2015 - ISO 14001 - In-house design department able to meet all customer requirements - Our own Research and Development Center Customer relations are of paramount importance to us, as their satisfaction is our greatest success!

Condition: new, Year of construction: 2025, SHAFTS DEDICATED FOR ARJES 950 / TYTAN MACHINES IN ALL AVAILABLE CONFIGURATIONS. NOW ALSO AVAILABLE WITH CASSETTE OPTION. - STEEL SHAFTS WITH TWO TYPES OF RINGS - BETONWELLE SHAFTS - PADDLE SHAFTS WITH TWO DESIGNS - STAR SHAFTS PROTECHNIKA is a company with 21 years of history, specializing since its inception in the production of spare parts and complete recycling lines. In recent years, we have expanded our product range to include the manufacturing of grinding shafts for slow-speed shredders. Thanks to the implementation of automated welding processes and in-house production technology, we have minimized lead times while maintaining consistently high quality. Grinding shafts are produced in series, allowing us, among other benefits, to collaborate with machinery manufacturers as OEM suppliers. What makes PROTECHNIKA stand out from the competition? The answer is straightforward! Gsdjx Hhd Dspfx An Reit - Certified 3.1 materials - TUV SUD Rheinland quality certification - ISO 9001 - Automated welding process / ISO 15613 / ISO 15614 - ISO 9606-1 certified welders - ISO 9001:2015 - ISO 14001 - Independent design department capable of fulfilling any customer requirement - Own RESEARCH & DEVELOPMENT CENTER Customer relations are our highest priority, as their satisfaction is our success!

Condition: like new (used), multifunctional tool for checking the safety of low voltage electrical systems SEFT950 Carlo Gavazzi SEFT 950, serial number: 002814/21006, instrument complete with transport bag, cables of various sizes, transducer for converting the measurements stored on the PC, equipment for measurements in medical offices, pegs for step and contact measurements or ground measurements, performs all types of electrical measurements, with an instruction manual. Measure Low-Ohm = Rpe Measure isolation = Riso Measurement of earth and ground resistivity = Re/p Measure LOOP = LOOP Measure RCD = RCD Measure voltage drop = %ΔU Measure the cyclical voltage of the phases = O/V Price Euro 800 + VAT Delivery condition, FCA: Oradea/Romania We can deliver/export everywhere in the World. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. Gedpfxjg Tdxds An Rjit We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2009, condition: excellent (used), I sell the widebelt sanding machine RWT BS950RP, year 2009. Configuration: Hard rubber cylinder Combi unit soft rubber cylinder + pneumatic jumping pad. Working width 950mm Elektronic working height adjustment with digital readout 3-160mm 1 Motor 11kW 2 Feeding speeds. Programming of in/out jump of the pad. Sensitive adjustment of pad position. Sensitive adjustment of cylinders position. Pneumatic adjustment of pad and cylinders pressure position. Pressure rollers for short elements. Gijdpfxoiuc Sgs An Rst Condition LIKE NEW ! The machine was working only a few. Available immediately.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, clamping force: 9,500 kN, screw diameter: 120 mm, ejector stroke: 300 mm, opening stroke: 1,900 mm, TECHNICAL DETAILS Clamping force: 9,500 kN Opening force: 665 kN Tie bar distance: 1,400 x 1,150 mm Giedoxup Siepfx An Ret Clamping plates: 1,960 x 1,710 mm Opening stroke: 1,900 mm Min. mould height: 500 mm Max. mould height: 1,200 mm Max. opening width: 2,400 mm Ejector stroke: 300 mm High-performance screw HPS-UN, diameter: 120 mm Nozzle radius: 30 mm Nozzle opening: 12 mm Screw diameter: 120 mm Shot weight (HDPE): 5,420 g Shot volume: 7,634 cm³ Specific injection pressure: 2,257 bar MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 12,770 x 3,420 x 2,750 mm Machine weight: 61.5 t

Condition: good (used), functionality: fully functional, Year of construction: 2005, operating hours: 25,000 h, machine/vehicle number: CAT09500EAYL02286, Machine in working condition. Gisdpfx Aoww Nv Aon Rjt

Year of construction: 1989, condition: good (used), functionality: fully functional, 300kg/h Capacity Electrically Heated Kohnle Heat Treatment Line Fully functinal Still in operation Line Consisted With : Gjdpfexqy Dujx An Rsit Loading - Electrically Hardening Furnace (1989)- Oil Tank - Rare Washing Machine - WMA Loading Unit For Tempering - Gas Heated Tempering Furnace (Industrial Ofenbau 2007) Protection Gas : Nitrogen / Methanol

Condition: used, Year of construction: 2024, Plough body STU 40 Coulter 430 HD System protector SCHERBOLZEN / Giedpsuhnlmjfx An Rst

Year of construction: 1991, condition: excellent (used), functionality: fully functional, 250kg/h Capacity Gas Heated Kohnle Heat Treatment Line Giedpfx Ajxqy Iten Rot Fully functinal Still in operation Line Consisted With : Loading - Gas Heated Hardening Furnace (1991)- Oil Tank - Rare Washing Machine - Loading Unit For Tempering - Electrically Heated Tempering Furnace (Industrial Ofenbau 2007) - Blackning Tank Protection Gas : Nitrogen / Methanol