Used Stas Walking Floor Semitrailer for sale (18,773)

Condition: new, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 93 m³, Chassis Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg) Axles and suspension "Disc brake 22.5" Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels 6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120 Seatposts mechanical support winches with two speeds, 2x 20 ton support load with swivel foot, Braking system according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system, electrical system Psdpfx Asyh S Aijhcsra according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection Structure/trough "structure fully welded inside" reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards Hydraulic system "Cargo - Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses Accessories 6 PV

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT33903000214, empty load weight: 7,850 kg, maximum load weight: 31,150 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 14,905 mm, loading space width: 2,470 mm, loading space height: 2,853 mm, loading space volume: 101 m³, total length: 15,350 mm, total width: 2,550 mm, total height: 4,005 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, color: black, #Chassis – General Haulage Semi-Trailer - X-tra Long, ~14,700 mm internal length - Lashing ring prep in floor sides (max. 13 pairs), 6 pairs fitted rear - 24t two-speed landing gear, reinforced, loaded coupling, single-side operation, half-round foot - Pull-out ladder at rear - Side door retainer - Steel rear underrun protection - Rear mud flaps full width; anti-spray flaps to EC standard - Rear impact protection - Aluminium ladder ~3,550 mm, side bracket - Plastic toolbox w/ drawer & shelf, 650x520x670 mm, padlockable (lock not included) - Spare wheel carrier for 1 spare wheel, with wheel fixing kit - 1 spare wheel #Axles & Suspension - SAF disc brake axles, 430 mm disc diameter, axle stop on 3rd axle, bolted/clamped - Laser-aligned axles/chassis – reduces tyre wear and fuel consumption - Air suspension with bellows pressure gauge #Braking System - 2-line air brakes, colour-coded lines for easy service - Spring-loaded parking brake - 2 anti-mismatch coupling heads front, no connecting line - EBS, socket front, no connecting cable - Towing vehicle must ensure ABS effectiveness - Lift/lower valve on control panel, front left ahead of axles - Driving stability system - AAC Basic auto axle-load relief (last axle), manoeuvring aid to 20 km/h, manual off - Trailer info centre & EBS CAN-bus axle-load display (cab): loads, mileage, diagnostics (not calibrated; pre-equip.) - TPMS Haldex tyre monitoring via EBS (truck pre-equipped) - Additional air connection rear left, quick-release #Wheels & Tyres - 385/55 R22.5" - Polished alloy wheels, AlexRims #Electrics - 24V multi-chamber LED lights w/ resistor, yellow side LEDs, LED plate light, Aspöck EcoLED 2 - Premium LED side marker lights, 20 LEDs/light, optionally coupled to yellow LEDs (flashing) - 2 white LED front position lights - 2 white/red LED outline marker lights rear - 1x 15-pin socket front, no connecting cable - LED work lights both sides, via reversing light - 2 additional rear LED work lights, via reversing light #Sliding-Floor Hydraulics - Hydraulic cylinder w/ sliding mechanism in floor, 2-circuit hydraulics - Forward/reverse switching, electric, corded remote; controls front left ahead of axles - Sliding-floor power via side/parking light - Hydraulic operation via truck PTO - Hydraulic connection, hose at front wall, HDK screw coupling, NW 48 mm - 2-circuit hydraulic system required; rec. 110 l/min, 250 bar, min. tank 100 l #Sliding Floor - Sliding floor w/ rear wear plate, stainless steel (V2A) Prodszw Dygspfx Ahcja - Aluminium floor boards, 8 mm profile, ribbed - Aluminium end caps #Body - Aluminium box body, abrasion-resistant; alu hollow-section walls, welded frame w/ reinforcement - Rear wear plates on side walls ~3000x1900x4 mm, fully welded - Front service door left, steps both sides - Sliding wall (easier unloading), reinforced tarpaulin flaps below, rail scraper - Rear wall: alu hollow-section 2-leaf door (1/2–1/2), U-seal edging, 2 rotary bar locks, mech. lock (rear-left), pivoting top cross bar, Fliegl "I-Lock", padlockable - Rear wall with pneumatic safety lock, ahead of axles left (replaces mechanical lock) - Standing platform, ladder access both sides, handrail, for roof tarpaulin operation - 4 removable, pivoting reinforced cross bars for tarpaulin support - Reinforced roller tarpaulin ~900 g, one-side release, 2 longitudinal + 3 ratchet straps, hook/rope fixing, stops right

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2021, next inspection (TÜV): 07/2027, loading space length: 13,500 mm, loading space width: 2,475 mm, loading space height: 2,650 mm, loading space volume: 91 m³, Year of construction: 2021,

Condition: used, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 03/2010, next inspection (TÜV): 04/2026, loading space volume: 92 m³, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2010, Equipment: ABS, In accordance with our General Terms and Conditions, and without any warranty or guarantee, we are pleased to offer you the following vehicle without obligation and subject to prior sale, errors, or typographical mistakes: Kraker 92 cbm Moving Floor Trailer (Vehicle No. 109) First registration: 12.03.2010 Type: CF 200 Perm. total weight: 35,000 kg Dimensions: Length 14,010 mm x Width 2,550 mm x Height 3,800 mm Loading volume: 92 cbm TÜV valid until 04/2026 Sliding tarpaulin, platform Portal doors split 1/2 + 1/2 at the rear Pjdpezir Trefx Ahcsra Clean floor and end sections Remote control for moving floor Cargo Floor system 2 x LED work lights above drop supports Drop supports BPW axles 1st axle lift Tyres: 385/65R22.5 (1st approx. 40/50%, 2nd approx. 60/40%, 3rd approx. 30/70%) Wheel chock 1 pair of LED work lights behind the 3rd axle WABCO ABS Air suspension Price: €14,000.00 (net) All information is provided without any guarantee or warranty. Our General Terms and Conditions apply. The place of jurisdiction for both parties up to a disputed amount of €100,000 is the local court of Ludwigslust; for higher disputed amounts, the regional court of Schwerin. Subject to errors, misprints, and prior sale.

Condition: used, first registration: 10/2011, Year of construction: 2011, REISCH 82 m³ Moving Floor Semi-Trailer Walkingfloor with Grain Hopper FLOOR: IN VERY GOOD CONDITION! ● Body: Full aluminum ● Chassis: Steel ● Capacity: 82 m³ ● 3 x BPW ECO Plus axles ● Air suspension ● Lift axle ● Raise/lower system ● Disc brakes ● Platform ● Rear grain hopper and slide ● Rolling tarpaulin ● Aluminum sliding wall ● Hydraulic locking ● WABCO Smartboard ● ABS ● ALCOA rims ● Tyres: 385/65 R 22.5 ● GVW: 35,000 kg ● Curb weight: 7,700 kg! ● Overall length: 14,050 mm ● Internal dimensions (incl. grain hopper): 12,600 x 2,470 x 2,510 mm - German trailer! - 1st owner! - TÜV / roadworthiness test: new! Errors and prior sale excepted! = More information = Prodpfxsyutyre Ahcja Payload: 1 kg For more information, contact Joannis Arpantzanis or Kai Bühler.

Condition: used, axle configuration: 3 axles, first registration: 01/2018, loading space length: 13,380 mm, loading space width: 2,480 mm, loading space height: 2,760 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 1,300 mm, Year of construction: 2017, Tyre size: 385/65R22,5 Prsdoucy Agopfx Ahcja Suspension: air suspension Drive: Wheel Empty weight: 7.200 kg Carrying capacity: 34.800 kg GVW: 42.000 kg

Condition: used, empty load weight: 7,700 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 03/2015, loading space length: 13,530 mm, loading space width: 2,470 mm, loading space height: 2,800 mm, suspension: air, tire size: 385/65 R22,5, wheelbase: 1,310 mm, color: silver, Equipment: ABS, Drum brake EBS Payload 27,300 kg Suspension: air-lift Sliding tarpaulin Platform SAF axles Alcoa aluminium rims Prsdownfkkopfx Ahcoa Lifting and lowering device Subject to errors and omissions

Condition: new, maximum load weight: 31,175 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,575 mm, loading space volume: 92 m³, Year of construction: 2026, Equipment: ABS, Stock number: 5742 THE PHOTOS IN THE LISTING ARE SAMPLE IMAGES AND DO NOT 100% MATCH THE ACTUAL EQUIPMENT! AVAILABLE FOR RENT, PURCHASE, OR RENT WITH PURCHASE OPTION BY AGREEMENT! Kraker approx. 92 m³ moving floor trailer with 10mm Cargofloor floor / remote control / wear plates / pneumatic underride guard / rental also possible! ---- * Manufacturer: Kraker * Model: K-Force - Moving Floor * First registration: - (NEW VEHICLE) * Color: Body RAL 9010 / Chassis MicroZinq / Tarp SIO 7999 Black * Technically permissible total weight: 39,000 kg * Unladen weight according to manufacturer: 7,825 kg * Payload: 31,175 kg * Volume: approx. 92 m³ (13.53 m long x 2.48 m wide x 2.369m/2.782m high) * Axles: 3x SAF with 1st axle as lift axle and starting aid / disc brakes * Tyres: 385/65R 22.5 on steel rims * Suspension: Air suspension with lift and lower * EBS Wabco * Chassis: Microzinc * Rear wear plates 1,250 x 2,500 x 3 mm * Double-wing rear doors with pneumatic locking * Operator platform at the front with access on the left * Saddle height: 1150mm * Cargo Floor CF 500 Compact floor with 21 floorboards * Floor 10mm thick, ribbed, with aluminium end caps * Operation via remote control and control box at the left rear * Rolling tarp with central locking * Sliding wall (moveable partition) made of aluminium with drag sheet * 2 plastic track cleaners on the sliding carriage * Extendable access steps at the rear right Prjdpfx Aeyawkxohcea * 4 x pivoting steel roof bows, 50mm round * 2 x round LED tail lights per side * 2 x LED work lights at support leg height * 2 x LED reversing lights mounted laterally behind the axles * Plastic toolbox at rear left * Holders for broom and shovel * 10-step ladder * Hydraulic hoses at the front approx. 3.5 m long * Single mudguards * Compressed air connection for cleaning gun * TPMS tire pressure monitoring system * Wabco Smartboard# AVAILABLE FOR RENT, PURCHASE, OR RENT WITH PURCHASE OPTION BY AGREEMENT! THE PHOTOS IN THE LISTING ARE SAMPLE IMAGES AND DO NOT 100% MATCH THE ACTUAL EQUIPMENT! Note on possible errors in the listing: Despite careful preparation of this listing, there may occasionally be errors in the text or details. We assume no liability for errors, changes, or prior sale. All information is supplied without guarantee. Please contact us to verify details or clarify any questions.

Condition: used, empty load weight: 6,640 kg, maximum load weight: 29,360 kg, overall weight: 36,000 kg, axle configuration: > 3 axles, first registration: 11/2022, loading space length: 10,350 mm, loading space width: 2,460 mm, loading space height: 2,400 mm, loading space volume: 61 m³, total length: 10,350 mm, suspension: air, tire size: 385/65 22,5, tire condition: 60 %, color: yellow, Year of construction: 2022, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 41134 Kempf, SP 35/3 * Year of manufacture: 2022 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Alloy wheels * Air suspension * Lift axle Prjdpeyy H Nrefx Ahcea * Neutral tarpaulin * Used tarpaulin * Portal door * Air connector coupling head (red + yellow) * 15-pin connector plug * Lifting and lowering device * Storage/toolbox * Platform * Sliding tarpaulin * Grain discharge chute * Radio remote control * Suspension: air * Gross weight: 36,000 kg * Curb weight: 6,640 kg * Payload: 29,360 kg * Permissible gross weight: 36,000 kg * Axle manufacturer: BPW * Tire condition, 1st axle: 60% -- 60% - Tire size: 385/65 R22.5 * Tire condition, 2nd axle: 70% -- 70% - Tire size: 385/65 R22.5 * Tire condition, 3rd axle: 50% -- 70% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Internal dimensions: L=10,350 mm, W=2,460 mm, H=2,400 mm * Internal volume*: 61 m³ * Pallet spaces: 25 Disclaimer: Subject to change, prior sale, and errors excepted. You will find more pictures and videos on our homepage. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Quick and uncomplicated financing * Handling all (export) documentation * Ordering of export plates / customs plates * Vehicle preparation: new tarpaulins, signage, painting, etc. * Professional loading and load securing * TÜV inspections, registration services * Delivery/transfer of commercial vehicles Please contact our trained professional staff—we are happy to advise you.

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33902036248, empty load weight: 7,272 kg, maximum load weight: 27,728 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,460 mm, loading space width: 2,470 mm, loading space height: 2,655 mm, loading space volume: 92 m³, total length: 13,800 mm, total width: 2,550 mm, total height: 4,005 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Container color: solid color, RAL color freely selectable Chassis: semi-trailer, for forwarding companies Fine-grained steel welded construction in lightweight design, up to the support legs, trailer plate with replaceable 2" kingpin 24 tons, 2-speed support winch, single-sided operation Extension ladder at the rear Door latch on the side Folding mudguard for lighting unit Rear impact protection 1 aluminum ladder approx. 3,550 mm, with holder on the side Podpfx Aoza S E Rohcsra 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Axles + suspension BPW disc brake axles with 430 mm disc diameter Air suspension, 1st axle automatic lift axle, including forced lowering and starting assist, activated by "3x braking" Braking system 2-line compressed air braking system Spring brake parking brake 2 tamper-proof coupling heads at the front 24 Volt EBS, electronic braking system with EBS socket at the front Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system "TPMS" tire pressure monitoring system according to ECE R 141, display via display in the towing vehicle, via EBS 1 additional air connection on the left rear, with quick-release coupling Wheels and tires 385/55 R22.5", manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side Yellow LED lighting on the side linked to the turn signal ("flashing side marker lights") 2 white position lights at the front in LED 2 white/red side marker lights at the rear 2 x 7-pin and 1 x 15-pin tamper-proof sockets at the front, without connecting cable 2 additional LED work lights at the rear, switched via reversing light Self-tipping hydraulics Hydraulic cylinder with sliding mechanism installed in the floor. 2-circuit hydraulics. Switching between forward/reverse operation is done electrically via remote control with cable Operation hydraulically via truck PTO Hydraulic connection with hose on the front wall and HDK screw connection NW = 48 mm Self-tipping floor Sliding floor with wear plate at the rear Floorboards made of aluminum, 8 mm floor profile, ribbed design Self-tipping container Aluminum box container made of high-quality, abrasion-resistant material. Front and side walls made of aluminum hollow profiles, welded all around at the top with a wide special reinforcing profile made of aluminum, welded to a special frame at the bottom. Sliding wall for better unloading of the load, with reinforced tarpaulin flaps at the bottom. Rear wall made of aluminum hollow profiles, as a 2-wing door, with a 1/2 to 1/2 split, framed all around with a special U-profile with stop and rubber seal, with 2 swivel latch bars on the outside, locked at the top and bottom. Rear wall with mechanical safety locking, operated at the rear on the left in the direction of travel Standing platform with ladder on both sides in the direction of travel left/right and railing, for opening and closing the roof tarpaulin 3 removable, swiveling crossbars for tarpaulin support + tarpaulin support at the front on the front wall and at the rear on the rear wall Paint finish Frame DB 7350 Novagrau "10-year warranty against rust through" Support legs Black coated Container Aluminum natural - can be painted in RAL color according to customer's request Roof tarpaulin Not yet

Condition: used, machine/vehicle number: 1, empty load weight: 8,000 kg, maximum load weight: 30,000 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 10/2005, next inspection (TÜV): 10/2020, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 92 m³, suspension: air, tire size: 385.65 r 22.5, color: red, Year of construction: 2005, Equipment: ABS, tail-lift, Semi-trailer, STAS, 92 m3 capacity, with a 21-slat moving floor, ideal for waste transport. Features include an adjustable, sealed hydraulic tailgate and a closed roof covering 2/3 of the trailer. Three-axle disc brake system with a steering third axle. Includes a front bulkhead. Year of manufacture: 2005. Valid inspection until 31.10.2020. - DEALER: INTERDRIVE SRL - PARMA. Pedpfxsh I Id Nj Ahcera

Condition: used, machine/vehicle number: WFDFLT33902030059, empty load weight: 7,452 kg, maximum load weight: 27,548 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2023, loading space length: 13,460 mm, loading space width: 2,470 mm, loading space height: 2,655 mm, loading space volume: 92 m³, total length: 13,800 mm, total width: 2,550 mm, total height: 4,005 mm, suspension: air, tire size: 385/55 R22,5", color: black, The images shown are archive images; the vehicle may still be in use! Weights and Dimensions: Permissible / technical gross weight: 35,000 / 39,000 kg Permissible / technical payload approx.: 27,548 / 31,548 kg Permissible / technical aggregate load: 24,000 / 27,000 kg Permissible / technical fifth wheel load: 11,000 / 12,000 kg Unladen weight (basic version) approx.: 7,452 kg +/- manufacturing tolerance Overall length approx.: 13,800 mm Overall width max.: 2,550 mm Overall height approx.: 4,005 mm Internal length approx.: 13,460 mm Internal width approx.: 2,470 mm Internal height front approx.: 2,655 mm Internal height rear approx.: 2,853 mm Volume approx.: 92 cbm Fifth wheel height approx.: 1,130 mm King pin installation dimension approx.: 1,640 mm Pjdpfjwk Dc Rsx Ahcora Front corner dimension approx.: 2,040 mm Chassis Semi-Trailer for Forwarding Fine-grain steel lightweight welded construction, up to the landing legs, fifth wheel plate with replaceable 2" king pin. Prepared lashing rings integrated into the floor (max. 13 pairs) 24-ton two-speed landing gear, single-sided operation, straight lower part, without load equaliser Pull-out ladder at rear Door retainers on the sides Wheel chocks with holder Aluminum side underrun protection Steel rear underrun protection with wide Fliegl mud flaps Foldable fender for lighting unit Quarter shell mudguards Rear impact protection Axles & Suspension BPW disc brake axles Air suspension 1st axle with automatic lift axle, including forced lowering and start assist, activation via triple brake application Brake System Two-line compressed air brake system Colour-coded line routing for easier servicing Spring-loaded parking brake Two fail-safe coupling heads at front, without connecting line EBS, electronic braking system with EBS socket at the front, no connecting cable Wheels 385/55 R22.5" Electrics 24 volt, multi-chamber lights, yellow side LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin fail-safe sockets at the front, without connecting cables SB Hydraulics Hydraulic cylinder with sliding unit integrated in the floor. Dual-circuit hydraulics. Note: A dual-circuit hydraulic system is required! Recommended pump capacity: Capacity: 110 l/min Pressure: 250 bar Min. oil tank capacity: 100 l SB Tipper Body Aluminum box-type tipper body made from high-grade, wear-resistant material. Front and side walls made from aluminum hollow sections, welded with a wide special reinforcement profile around the top and a special reinforcement frame at the bottom. Sliding bulkhead for improved unloading of cargo, with reinforced tarpaulin flaps at the bottom. Rear wall made of aluminum hollow sections as a two-leaf door, split 1/2 to 1/2, framed all round with a special U-profile with stop and rubber seal, fitted with two external rotary bar locks, locked at top and bottom. Rear wall with mechanical safety lock, operated at the rear on the left side in direction of travel. Including a swivelling crossbar at the top. Standing platform with ladder access on both sides (left/right in direction of travel) and guardrail for opening and closing the roof tarpaulin Removable, swivelling crossbars for tarpaulin support + tarpaulin support at front bulkhead and at rear wall. Roll tarp can be stored on one side with two longitudinal tension belts, 3 ratchet tension belts on the side. The tarp is fastened with hooks and rubber ropes at the front bulkhead and above the rear doors; features

Condition: used, functionality: fully functional, machine/vehicle number: 1941, empty load weight: 7,480 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 05/2011, next inspection (TÜV): 10/2024, loading space length: 13,600 mm, loading space width: 2,470 mm, loading space height: 2,770 mm, loading space volume: 93 m³, suspension: air, tire size: 385/65/22.5, color: silver, Year of construction: 2011, Equipment: ABS, H & W moving floor , Cargo Floor floor , Lift axle , Roller tarpaulin , Platform , Folding rear light protection , Moving wall with service door , German trailer Prjdpsq T Iuyefx Ahcoa Sale only to traders and under exclusion of any warranty . We deliver to any GERMAN seaport .

Condition: used, maximum load weight: 28,520 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2021, next inspection (TÜV): 10/2025, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Knapen K200 Moving Floor 92 m³ * BPW axles with air suspension and disc brakes * 1st axle liftable * Tyres 385/65 R22.5 * Work lights * Sliding roof tarpaulin Pedpfox R Rdbsx Ahcsra * Movable partition wall * Spare wheel holder * Work platform with ladder access We are happy to provide further information on request.

Condition: used, empty load weight: 8,200 kg, maximum load weight: 26,800 kg, overall weight: 35,000 kg, axle configuration: > 3 axles, first registration: 04/2023, loading space length: 13,460 mm, loading space width: 2,450 mm, loading space height: 2,500 mm, loading space volume: 82 m³, total length: 13,460 mm, suspension: air, tire size: 385/65 22,5, tire condition: 60 %, color: grey, Year of construction: 2023, operating hours: 87,097 h, mileage: 87,097 km, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference no. for inquiries: 40978 Reisch, sliding floor trailer * Year of manufacture: 2023 * ABS, Anti-lock Braking System * Alloy wheels * Air suspension * Lift axle * Tarpaulin, neutral color * Used tarpaulin * Portal door * Air connection, coupling head (red + yellow) * Connection plug, 2x7-pin * Connection plug, 15-pin * Lifting and lowering device * Storage box / toolbox * Platform * Roller shutter tarpaulin * Suspension: Air * Total weight: 35,000 kg * Tare weight: 8,200 kg * Payload: 26,800 kg * Permissible total weight: 35,000 kg * Axle manufacturer: SAF * Tire condition 1st axle: 60% - 60% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 60% - 50% - Tire size: 385/65 R22.5 * Tire condition 3rd axle: 60% - 60% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Interior dimensions: L=13460 mm, W=2450 mm, H=2500 mm * Internal volume*: 82 m² * Pallet spaces: 33 * Wabco SmartBoard * Mileage: 87,097 km * Remote control * Tire pressure monitoring * Cargo-Floor CF 500mm * 7mm thick XD Extra Duty * Saddle height 1150mm * Full-LED lighting * Color 7012 Basalt Grey * Upon request, we will send you a video * Construction details and further images Disclaimer: Predpfjyv Upxsx Ahcja Subject to changes, prior sale, and errors. You can find more images and videos on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, paintwork, etc. * Professional loading / load securing * TÜV inspections, registration service * Transportation of commercial vehicles Please contact our trained specialists; we will be happy to advise you.

Condition: used, Tennant 5680 Walk-Behind Floor Scrubber – Key Specifications a Tennant 5680 battery-powered walk-behind floor scrubber, ideal for commercial and industrial cleaning applications. This model is known for its durability, reliability and excellent cleaning performance — perfect for warehouses, manufacturing floors, supermarkets, healthcare facilities and contract cleaning operations. - Model: Tennant 5680 (battery-powered walk-behind scrubber) - Solution tank: 30 gallons / 114 L Prjdpfx Aox Szwbjhcoa - Recovery tank: 40 gallons / 151 L - Brush motors: (2) 0.75 hp (0.5 kW) - Brush speeds: - • Disc: 200 rpm - • Cylindrical: 750 rpm - Vacuum motor: 0.8 hp, 3-stage - Battery system: 36 V (Standard ≈ 240 Ah) - Machine weight (with batteries): ~805 lb / 365 kg - Noise level: ~75 dBA - Estimated cleaning coverage: up to ~30,600 ft²/h (≈ 2,845 m²/h) depending on path & technology used Condition - Machine is in excellent working condition - Fully tested and ready for immediate use - Batteries and scrub heads in operational condition (specify if new/serviced if applicable) Contact us for pricing, additional pictures, video demonstration, or to schedule a viewing. Worldwide delivery available. keywords: Tennant 5680 floor scrubber, walk-behind scrubber, battery floor scrubber, industrial floor cleaning machine, used Tennant 5680 for sale

Condition: used, axle configuration: 3 axles, first registration: 06/2023, total length: 13,250 mm, total width: 2,470 mm, total height: 2,650 mm, suspension: air, tire size: 385/65/22.5, color: other, Year of construction: 2023, Equipment: ABS, = Additional options and accessories = Other - Rear doors Other - Air suspension Prjdpfx Aozhmmkehcoa = Further information = Tire size: 385/65/22.5 Brakes: Disc brakes Suspension: Air suspension Unladen weight: 7,990 kg Payload: 31,010 kg GVW: 39,000 kg Damage: none License plate: QAQV363

Condition: used, empty load weight: 7,950 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 01/2013, loading space length: 13,500 mm, loading space width: 2,470 mm, loading space height: 2,850 mm, loading space volume: 95 m³, tire size: 385/55 R22,5, wheelbase: 1,310 mm, color: black, Equipment: ABS, Disc brake EBS Payload 27,050 kg Prodpfx Aheuiyvyocoa Air-lift suspension Roll-up tarpaulin Platform SAF axles Alcoa aluminum rims Lifting and lowering device Lashing rings Errors excepted

Condition: new, functionality: fully functional, empty load weight: 9,000 kg, maximum load weight: 27,000 kg, overall weight: 36,000 kg, axle configuration: 3 axles, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 8,000 kg, permissible axle load (axle 3): 8,000 kg, first registration: 03/2026, loading space length: 12,600 mm, loading space width: 2,470 mm, loading space height: 2,300 mm, loading space volume: 70 m³, total length: 13,000 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 24R20,5, tire condition: 100 %, wheelbase: 30 mm, maximum speed: 80 km/h, color: grey, trailer brake: trailer braked, Year of construction: 2026, Agrotruck Moving Floor Agrotruck moving floor with tractor unit (Note: The images displayed are SAMPLE IMAGES) Tractor unit USED, MAN all-wheel drive, 6 years old, approx. 250,000 km, Agrotruck registration including Agrotruck tyres. Agrotruck moving floor NEW VEHICLE, unladen weight 9 tons, 72 m² cargo volume, 12,600 mm superstructure length, fifth wheel height from 1,230 mm (hydraulics with road tyres) to 1,400 mm (full all-wheel drive with agricultural tyres), high-speed unloading system enables discharge as fast as a pusher trailer, interchangeable tyres. Option 1: 1st axle 445/65R22.5 2nd + 3rd axle 600/65R26.5 Option 2: Psdpfx Ahoytqpbjcjra 1st + 2nd + 3rd axle 445/65R22.5 All wheels are motorway-approved! Air suspension, mechanically forced steering, only moving floor hydraulics required, hydraulic tailgate, two-part automatic tarpaulin, operated in parallel with folding bows, remote control operation.

Condition: used, functionality: fully functional, machine/vehicle number: 2185, empty load weight: 6,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 11/2011, next inspection (TÜV): 02/2027, loading space volume: 40 m³, suspension: air, tire size: 385/65/22.5, wheelbase: 1,310 mm, color: silver, trailer brake: trailer braked, Year of construction: 2011, Equipment: ABS, Schmitz aluminum body with steel chassis, 40 m³, lift axle, roll tarp, platform, folding underrun guard, Schmitz axles with disc brakes, Quicksilver plastic wear-resistant floor, rear door in 11/25, grain slide, German-made semi-trailer. Sold only to commercial businesses and with exclusion of any warranty. We deliver to any German seaport. Prodszdb Icspfx Ahcea

Condition: used, empty load weight: 7,950 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 03/2013, loading space length: 13,500 mm, loading space width: 2,470 mm, loading space height: 2,850 mm, loading space volume: 95 m³, tire size: 385/55 R22,5, wheelbase: 1,310 mm, color: black, Equipment: ABS, Disc brake EBS Payload 27,050 kg Air-lift suspension Roll-up tarpaulin Platform SAF axles Alcoa aluminum rims Lifting and lowering device Lashing rings Errors excepted Prjdpfx Asuiytlehcea

Condition: new, maximum load weight: 31,098 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,740 mm, loading space volume: 92 m³, Year of construction: 2026, Equipment: ABS, Stock no.: 5743 IMMEDIATELY AVAILABLE! AVAILABLE FOR RENT, PURCHASE, OR LEASE WITH OPTION TO BUY, BY APPOINTMENT! Approx. 92 m³ Kraker sliding floor semi-trailer with 10 mm ribbed floor / remote control / pneumatic underrun protection / side protection tarpaulin / Chassis galvanized ---- * Manufacturer: Kraker * Type: K-Force * Year of manufacture: 2026 * Total weight: 39,000 kg * Unladen weight according to manufacturer: 7,902 kg * Payload: 31,098 kg * Axles: 3x SAF with 1st axle as a lift axle and starting aid / disc brakes * Suspension: Air suspension with lifting and lowering * Tires: 385/65R 22.5 on steel rims * Color: Body RAL 7005 / Chassis MicroZinq / Tarpaulin SIO 7500 Black * Volume: 92 m³ (13.53 m long x 2.48 m wide x 2.69 m / 2.782 m high) * EBS Wabco * Chassis Microzinc * Wear plates at the rear 1,250 x 2,500 x 3 mm * Two-wing rear doors with pneumatic locking * Operating platform at the front with access ladder on the left * Saddle height: 1150 mm * Cargo Floor CF 500 Compact with 21 floor planks * Floor 10 mm thick, ribbed with aluminum end caps * Operation: Remote control and in the control panel * at the rear left * Roll tarpaulin with central locking * Roll-fix dirt tarpaulin for the side wall with crank * Sliding side wall made of aluminum with a trailing tarpaulin * 2 plastic rail cleaners on the carriage * Extendable access ladder at the rear right Psdpey T Dk Tsfx Ahcsra * 4 x Swiveling steel struts 50mm round * LED rear lights 2 x round on each side * 2x LED work lights at the height of the support winches * 2x LED reversing lights located behind the axles * Tool box made of plastic at the rear left * Holder for broom and shovel * Ladder with 10 steps * Hydraulic hoses at the front approx. 3.5 m long * Individual fenders * Compressed air connection for cleaning gun * TPMS tire pressure monitoring system * Wabco Smartboard * Pneumatically folding underrun protection * Full load supports (crank supports) AVAILABLE FOR RENT, PURCHASE, OR LEASE WITH OPTION TO BUY, BY APPOINTMENT! Note on possible errors in the advertisement: IMMEDIATELY AVAILABLE! AVAILABLE FOR RENT, PURCHASE, OR LEASE WITH OPTION TO BUY, BY APPOINTMENT! Despite careful preparation of the advertisement, individual errors may have crept into the text or data. We assume no liability for errors, changes or intermediate sales. All information is without guarantee. Please contact us to verify details or clarify further questions.

Condition: good (used), Floor weighing scale K-PZ Weigher indicator Type: KPZ 52E-9-1 Prsdpfx Asx Hz Dqehcsa Maximum weight: 300 kg Minimum weight: 2 kg, e=: 0.1 kg, T=- 300 kg Dimensions: 800 mm x 1100 mm x 100 mm Including ramp

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 7,550 kg, maximum load weight: 27,450 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/55 r22.5, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis Fine-grained steel welded construction in lightweight design, up to the support legs, drawbar with interchangeable 2 kingpin Laterally in the floor with lashing eye preparation (max. 13 pairs) 24 ton, 2-speed support winch, single-sided operation, with straight lower part, without thrust compensation Extendable ladder at the rear Door lock on the side 2 wheel chocks + holder Aluminum side impact protection Steel underrun protection with wide Fliegl mud flaps, foldable fender for light unit Quarter panel fenders Rear impact protection Aluminum ladder approx. 3,550 mm, with holder on the side Tarpaulin rod with bracket 1 plastic toolbox, with drawer and insert, w=650/h=520/d=670 mm, can be locked with a padlock 1 spare wheel holder for 1 spare wheel, with wheel fastening kit Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering & starting assist, actuated 3x by the brakes (starting assist is functional up to an axle load exceeding 30% and a speed of max. 25 km/h) Braking System 2-line pneumatic braking system, color-coded lines for easy servicing Spring brake parking brake 2 non-interchangeable coupling heads at the front EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle Stability System Wheels & Tires 385/55R22.5 according to manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front Self-Loading System (SBS) Hydraulic cylinder with sliding mechanism installed in the floor. 2-circuit hydraulic system. Switching between forward/reverse operation is done electrically via remote control with cable. -Shovel floor power supply via side marker light Actuation hydraulically via truck auxiliary drive Hydraulic connection with hose on the front wall and HDK screw connector NW = 48 mm, Note: A 2-circuit hydraulic system is required! Recommended pump performance: Flow rate: 110 l/min Pressure: 250 bar Oil tank filling min: 100 l Self-Loading System (SBS) Floor Sliding floor with wear plate at the rear Floor boards made of aluminum, 8 mm floor profile, ribbed design SBS Tipper Body Aluminum box tipper body, front and side walls made of aluminum hollow profiles, welded around the top with a wide special reinforcement profile made of aluminum, and welded with a special frame at the bottom. Sliding wall for better unloading of the load, with reinforced tarpaulin flaps at the bottom. Podpfx Ahsi Riwxjcera Rear wall made of aluminum hollow profiles, as a 2-wing door, with a division of 1/2 to 1/2, framed all around with a special U-profile with stop and rubber seal, with 2 externally mounted swivel locking rods, locked at the top & bottom. Rear wall with mechanical safety locking, operation at the rear on the left in the direction of travel. With pivoting crossbar at the top. The door locks can be locked with a padlock. Standing platfor

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2023, next inspection (TÜV): 09/2026, loading space length: 10,149 mm, loading space width: 2,325 mm, loading space height: 2,285 mm, loading space volume: 55 m³, Year of construction: 2023, Equipment: ABS, ferroSTAR 54.9 cbm iron gray Chassis type: Z-chassis Axle distance (mm): 1310-1310 Fifth wheel height (mm): 1150 Chassis width (mm): 1400 Loading width (mm): 2325 Technically permissible total weight: 39 = 12 + 9 + 9 + 9 Interior height front (mm) (IHF): 2285 Interior height rear (mm) (IHB): 2285 Volume (m³): 54.9 Overall width (mm): 2550 Wheelbase (mm) (WB): 6600 Overall length (mm): 11520.836 Chassis material: Steel Tire dimension: 385/65R22.5 Loading length (mm): 10149 Axle manufacturer: SAF Axle version: Intra Brake version: Disc brake Brake type: SAF - SBS 2220 Offset (ET): 120 Option 1: Axle with lift axle and starting aid Activation of starting aid: via button in the truck (installation of the button is not included in the scope of supply) and by pressing the brake pedal three times Air suspension: ECAS with lifting and lowering valve Lowering of air suspension: Automatic lowering of the air suspension during tilting, can be manually locked via the Smartboard, as well as a switch on the chassis Coupling head: Pneumatic, European Palm coupling Tire brand: Manufacturer's choice Rims: Steel Tire type: Regional Wheel nuts: Open Wheel nut caps: Plastic Outrigger supports: Aluminum drop-leg supports, mounted at the front of the chassis, with individual operation on both sides, supporting force 20t / pair Operation of underride protection: Manual Position of Smartboard: On the left side, in the direction of travel, in front of the axles Toolbox: On the left side, in the direction of travel, in front of the axles Spare wheel holder: On the right side, in the direction of travel, below the chassis Number of splash guards on the fender: 2 pieces Predpfx Aozmcn Ujhcsa Type of splash guard on the fender: Clear Pass Manufacturer of lighting: Aspöck Type of lighting: ECOLED II Work lights (operated via switch): Included Position of work lights (operated via switch): 2 LED reversing lights at the rear, on the left and right in the direction of travel, mounted on the lamp carrier Position of work lights (operated via switch): 2 LED reversing lights at the front, on the left and right in the direction of travel, mounted in the area of the outrigger supports Manufacturer of tilting cylinder: Hyva (STAS manufacturer's choice) Type of tilting cylinder: Hydraulic cylinder with small housing Cylinder tilting angle: Normal Model of tilting cylinder: Hyva - FC 169 Stroke of tilting cylinder: 7130 Hydraulic coupling: Swivel coupling Hydraulic coupling - Size: 1 Hydraulic coupling - Gender: Female Hydraulic coupling - Hose: 2,100 mm Type of Smartboard: ECAS control box Aluminum ladder: With 2.8 m length, mounted on the right in the direction of travel Broom and shovel holder: Included Position of broom and shovel holder: With 3 holders each, mounted on the chassis on the left in the direction of travel Position of broom and shovel holder: On the front wall, on the left in the direction of travel Load manometer: Ø 63 mm - mounted on the side of the instrument panel Splash guard for underride protection: Black with STAS logo, mounted across the entire width of the underride protection Mounting of splash guard for underride protection: Flexible Plastic support wedges: With two plastic support wedges including holder Air and electrical console: Mounted on the right in the direction of travel Rear wall type: Swing doors A-sign: Foldable on the rear wall, mounted on the right in the direction of travel Floor: Made of 6 mm HB450 Position of rubber supports: Mounted below the floor