Used Single-Head Welding Machine for sale (72,895)

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, welding machine Gjdpfx Anoz A R R Tjgouh -Manufacturer: Messer Griesheim, MIG/MAG gas-shielded welding machine -Type: Euromag 25-2 -Max. welding power: 250 A -Wire feed: 4-roll drive, separate, mobile -Accessories: Hose assembly, ground cable (see photos) -Dimensions: 970/490/H890 mm -Weight: 168 kg

Condition: as good as new (ex-display), Year of construction: 2020, Here we offer you a resistance welding system. The system is designed for the automated resistance welding of the following joints: Housing + QLT Gsdpfx Anjzd Rmgegeuh Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any use of the system other than that described above is not intended and therefore not permitted! System layout: Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (lxb) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator: 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components: - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Control: ST-T13V2.0 Power unit: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Type: BDE11154003 Condition: unused, machine has never been used in production Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: not inspected (used), throat depth: 500 mm, Manufacturer: Fase Full: 116 kVA Version: 500mm Gjdpfxeuhn Uhe Angsuh The machine used to be part of a system, its settings and performance were controlled via a central control unit, which is currently missing, This version is required to operate the machine!

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: A79N517901, input voltage: 230 V, travel distance X-axis: 450 mm, travel distance Y-axis: 360 mm, overall weight: 720 kg, total length: 3,040 mm, total width: 1,360 mm, total height: 1,750 mm, nominal power (apparent): 1 kVA, rotational speed (max.): 1,000 rpm, rotational speed (min.): 100 rpm, Brother BE-1206B-BC-PC Industrial 6-Head Embroidery Machine Professional 6-Head Commercial Embroidery System for High-Volume Production The Brother BE-1206B-BC-PC is a professional multi-head industrial embroidery machine designed for continuous commercial production of logos, workwear, uniforms, caps, promotional textiles, and fashion garments. Featuring six embroidery heads with twelve needles per head, the machine enables simultaneous embroidery of multiple garments while maintaining excellent productivity and consistent stitch quality. The machine has been used in professional garment manufacturing and is offered as part of the MASI JEANS factory liquidation. Technical Specifications • Manufacturer: Brother Industries, Ltd. • Model: BE-1206B-BC-PC • Machine Type: Multi-Head Industrial Embroidery Machine • Configuration: 6 Embroidery Heads • Needles: 12 Needles per Head • Total Needles: 72 • Maximum Embroidery Speed: Up to 1,000 stitches per minute • Embroidery Area: Approximately 360 × 450 mm per head • Stitch Length: Adjustable • Control System: Digital PC-Controlled Programming Interface • Automatic Thread Change: 12 Colors per Head • Automatic Thread Trimming • Heavy-Duty Industrial Frame • Integrated Production Table Key Features • Six-head simultaneous embroidery system • High-volume commercial production • Automatic 12-color thread change on each head • Automatic thread trimming • Digital pattern programming • Accurate stitch positioning • Suitable for flat garments and various embroidery applications • Heavy-duty industrial construction • Designed for continuous production environments • High productivity with consistent embroidery quality Includes • Brother BE-1206B-BC-PC embroidery machine • Integrated industrial table • Thread stand • Embroidery hoops as shown • Digital control interface • Industrial frame Applications • Corporate logo embroidery • Workwear and uniform production • Promotional textiles • Sportswear • Fashion apparel Guedpszib Apsfx Angsh • Caps, jackets and bags • Contract embroidery production • High-volume embroidery workshops Condition • Used industrial condition • Previously used in professional garment production • 5 embroidery heads fully operational • 1 embroidery head requires repair and is currently not operational • Good overall mechanical condition • Normal cosmetic wear consistent with industrial use • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading, transportation, and all related costs. Professional dismantling is recommended due to the size, weight, and precision alignment of the machine. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, EWM Phoenix 452 Puls Multimatrix Mig Mag welding machine Year of manufacture: 2023. Gjdpfx Aotkuvxongjuh unused still in original packaging.

Year of construction: 2020, condition: ready for operation (used), A handheld fiber laser welding machine Sitolaser with a Reycus laser source is available. Laser power: 1000W, cooling: water, welding capacity steel/copper/aluminum: 4mm/2mm/2mm, min. sheet thickness: 0.2mm, wavelength: 1080nm. Machine dimensions X/Y/Z: approx. 1200mm/650mm/1200mm, weight: approx. 250kg. Including various copper nozzles, spare lenses and heavy-duty casters for mobility. The item is a demonstration unit with few operating hours. Documentation available. An on-site inspection is possible. Guedpfx Anezfaarsgsh

Condition: excellent (used), Air-operated, water-cooled 3-phase direct current spot welding machine make DALEX type PMS 11-4 G3 Asload: 650 mm with special cylinder with low pressure range of 20-120 daN Gsdpfx Anou A Dg Eogjuh Rated power at 50 % duty cycle 60 kVA Sec. short-circuit current: 25 kA sec. open-circuit voltage: 3.68 V with add-on switch cabinet in accordance with VDE 0100 Main switch Synchronous welding control 8036 Weight: 685 kg

Condition: used, 50 units of Fronius TPS 450 welding machines, used 🧰 Product features • Manufacturer: Fronius • Model: TPS 450 • Condition: used, see photos • Color: red • Mains voltage: 380 V / 400 V / 415 V • Apparent power: 17.2 kVA • Efficiency: 90% • Welding current range: 3 - 450 A • Working voltage: 20 - 38 V • Open-circuit voltage: 50 - 80 V • Insulation class: F • Protection class: IP 23 • Cooling method: AF • Welding processes: MIG/MAG, MMA, WIG/TIG 💰 Price per unit: €1500 net, excluding VAT • Quantity discounts: available upon request • Shipping costs: available upon request, Europe-wide • Delivery time: immediately available • Inspection and collection: possible at any time by appointment We constantly have over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top warehouse technology & heavy-duty shelving, used & new Description: Are you looking for high-quality warehouse shelving to buy? With around 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). Gujdpfx Ansyn Ii Ijgeh ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of shelving immediately available • 20,000 m² of storage platforms & steel platform structures immediately available • Weekly 30–50 semi-trailer loads of goods turnover for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty shelving, high-bay racking, shelving with shelves, tire racks, or shelving for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty shelving Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round service package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete stock including thorough cleaning. 2. Commission-based auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling and thorough cleaning. Whether you became aware of us through heavy-duty shelving or are looking for galvanized heavy-duty shelving / heavy-duty shelving systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser power: 3,000 W, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Working Area (mm): 3048×1524 X-Axis Travel (mm）: 1524 Y-Axis Travel(mm）: 3048 Z-Axis Travel（mm）: 80 X/Y Axis Positioning Accuracy: ≤0.03mm/m X/Y Axis Repositioning Accuracy: ≤±0.02mm Maximum Synthetic Positioning Speed: 150m/min Maximum Acceleration: 1.2G Cutting Slit Width: 0.1mm-0.5mm (measured for platesless than3mm thick) Gusdpfx Anexvwcxogjh Cutting Surface Roughness: Ra3.2um-Ra25.4um(measured for plate thickness below3mm） Floor Size(mm): 6000*3000 Mainframe Dimension(mm): 5000*2300*1800 Screen Size: 21"LCD TransmissionMode: Rack andpinion dual drive Table Loading Capacity: 1.1(ton)

Year of construction: 2000, condition: used, Selecta S2T welding machine. Guedpfx Asz Dqx Hengjh

Condition: not inspected (used), Year of construction: 1995, functionality: unexamined, throat depth: 500 mm, Manufacturer: Fase Full: 116 kVA Version: 500mm The machine used to be part of a system, its settings and performance were controlled via a central control unit, which is currently missing, Gedsuhn Tkepfx Angjuh This version is required to operate the machine!

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 2113/21, type of input current: three-phase, input voltage: 400 V, total height: 2,200 mm, total width: 1,500 mm, total length: 2,000 mm, nominal power (apparent): 100 kVA, electrical fuse: 250 A, working range: 40 mm, welding power (max.): 100 kVA, overall weight: 2,500 kg, A new, unused butt-welding machine. Originally acquired for butt-welding 40 mm rebar, it was never put into service because the project was cancelled. The machine is currently fitted with 40 mm round jaws, but custom jaws of any required shape can easily be manufactured for it. In addition to rebar, the machine can be used to fabricate joints for heavy machinery or anchor bolts for reinforcement work. Guodpez Ehvlefx Angsh Suitable for the butt welding of all types of steel grades up to 1,500 mm².

Condition: used, Column resistance welding machine (spot welding machine) with a swing arm and mechanical drive, featuring a digital LCD multi-function control panel. Continuous and pulsed operation for welding steel, stainless steel, and galvanized sheets. Possible operating modes: EASY or EXPERT. Up to 20 individually configurable spot welding programs. Adjustment of spot welding current (%), spot welding time (cycles), pressure, and speed during electrode closing, as well as adjustment of the air flow to slow down the closing of the arms. Selection of various parameters of the spot welding cycle. The electrodes and arms must be cooled with liquid. Column resistance welding machine (spot welding machine) with a swing arm and digital microprocessor control. The digital LCD multi-function control panel enables the following operating modes: EASY (adjustment of spot welding current and spot welding time); EXPERT (adjustment of various spot welding parameters) with the ability to store up to 20 individually created programs. Continuous and pulsed operation ensures the best welds for different types of steel. Features: Spot welding current control (%), spot welding time (cycles), electrode closing force; Selection of various parameters of the spot welding cycle (holding time, ramp time, welding time, pause time, and pulse number); Easy-to-read LCD display; Mechanical drive via foot pedal; Adjustment of the arm span; Thermal protection with indicator. The electrodes and arms of this model must be water-cooled. CODE 824051 TWO-PHASE MAINS VOLTAGE 400 V MAINS FREQUENCY 50 / 60 Hz MAXIMUM SPOT WELDING CURRENT 16400 A MAXIMUM OPEN-CIRCUIT VOLTAGE 4.2 V MAXIMUM POWER CONSUMPTION 60 kVA RATED POWER X=50% 25 POWER FACTOR 0.7 MAXIMUM WELDING THICKNESS FOR 2 SHEETS 5 + 5 mm MAXIMUM ELECTRODE FORCE Guedpfjz D Aa Ajx Angeh 220 daN ELECTRODE PROTRUSION 330 mm DUTY CYCLE 5.5 % PROTECTION CLASS IP20 DIMENSIONS 79 x 32 x 128 cm WEIGHT 147 kg

Year of construction: 2013, condition: ready for operation (used), A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A TIG, lower for electrode welding approx. 60 percent, mains input: 3x400V 50Hz, protection class: IP23S, duty cycle at 100 percent 450A TIG at 40°C, electrode welding current approx. 360A at 100 percent duty cycle for electrode in the 450 DC version, input fuse protection: 32A at 400V three phase for 450 versions, length: 520mm, width: 360mm, height: 460mm, weight: approx. 28kg. An on-site inspection is possible. Gedpfxsxddams Angouh

Condition: good (used), Power: 50 kVA Gjdpfx Aopy Dypengjuh Arm design: 520 mm

Condition: good (used), Medium frequency 1000 Hz spot welding machine, 400 V 50 Hz Make: DALEX Model: PMS 11-4 MF Arm reach: 950 mm with double-acting cylinder Guodpfx Anjvyk Sfjgeh Rated power at 20% duty cycle: 180 kVA Secondary short-circuit current: 37 kA Secondary open-circuit voltage: 9 V Electrode force: 60-600 daN Weight: 550 kg

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: W261, repeat accuracy: 0.05 mm, workpiece weight (max.): 6,300 kg, working length: 4,000 mm, working width: 2,250 mm, working height: 230 mm, No minimum price – guaranteed sale to the highest bidder! The machine’s last inspection was carried out by a specialist company at the end of 2025! The machine can be inspected while powered on. TECHNICAL DETAILS Working area X: 4,000 mm Working area Y: 2,250 mm Working area Z: 230 mm Working area for round part machining, diameter max.: 440 mm Working area for round part machining, length max.: 3,700 mm Number of cutting heads: 1 to 4 Cutting carriage distance: max. 1,150 mm Positioning speed, axis-parallel X, Y max.: 60 m/min Positioning speed, simultaneous max.: 84 m/min Cutting speed max.: 50 m/min Travel speed min.: 0.001 m/min Machine tolerance according to VDI/DGQ 3441: ± 0.1 mm/axis Repeatability: ± 0.05 mm/axis Load capacity of the frame max.: 7,000 kg Load capacity per grating bar: 110 kg Number of grating bars max.: 70 Gedpfx Anezcwupsgsuh Workpiece weight, flat part max.: 6,300 kg Workpiece weight, round part max.: 500 kg MACHINE DETAILS Waterjet source: Bypump 50 APC Operating pressure: max. 3,800 bar Flow rate: 0 to 5 l/min Nozzle size in single-head operation: max. Ø 0.4 mm Nozzle size in dual-head operation: max. Ø 0.3 mm Nozzle size in dual-head operation: recommended Ø 0.28 mm Dimensions & Weight Machine dimensions (L x W x H): approx. 9,000 mm x 7,550 mm x 2,050 mm Weight: approx. 10,000 kg Operating Hours Operating hours: approx. 41,130 h Cutting hours Head 1 / Head 2: 13,720 h / 956 h EQUIPMENT CNC rotary axis Motorized cutting carriage distance adjustment Four-jaw chuck Abrasive hopper Spare parts PC with pre-installed programming software Note: The second head has been removed, and the cutting mechanism has been mounted on Head 1 as a spare part. However, after acquiring a new cutting head, the system can operate with two abrasive tools. The drilling spindle is seized. The crane and lifting device are not included in the scope of sale.

Condition: new, Year of construction: 2026, CORMAK WL2000 Laser Welder 3-in-1 is an advanced industrial device using fiber laser technology for precise welding, cutting, and cleaning. Thanks to its compact design and integrated control systems, the machine is an ideal solution for production plants requiring high efficiency, repeatability, and minimal thermal impact on the material. Main advantages of the machine Efficient water cooling system – ensures stable operating temperature and extends the service life of components. Ergonomic welding head – adjustable spot size from 0–5 mm, interchangeable nozzles, 7 m fiber optic cable, and full mobility. Automatic wire feeder – synchronized with the welding machine software, ensuring continuous operation. Welding with or without wire – flexibility in choosing the appropriate welding method. Processing of thin materials – e.g. stainless steel from 0.5 mm thickness. High weld repeatability – durable and aesthetic welds without the need for additional finishing. Optional laser cleaning function – expands the functionality of the device. Faster welding process – up to 3–10 times faster compared to traditional methods. Low indirect radiation level – proper protective glasses are sufficient for safe operation. Design and technology Gjdpfx Aeizr Rlsngeuh The handheld laser welder WL2000 is equipped with a 2000 W laser source, a water cooling system, and a modern welding head. The control system allows convenient switching between welding, cutting, and cleaning functions. The design enables operation in hard-to-reach areas, while interchangeable nozzles allow welding at various angles. Precision and work efficiency Thanks to the focused laser beam and minimal heat-affected zone, the CORMAK laser welder enables precise and durable welds without the risk of material deformation. High penetration depth and working speed make it an ideal tool for industrial applications where quality, speed, and repeatability are essential. Applications Processing of stainless steel, mild steel, galvanized steel, aluminium, and brass. Industrial plants, metalworking workshops, and production lines. Precision welding of lightweight and thin-walled structures. Removal of coatings and cleaning of metal surfaces. Standard equipment Laser welder with integrated water cooling system. Welding gun with focal length adjustment and accessory set. MaxPhotonics laser source. Automatic wire feeder. Complete set of connection cables. Starter kit of nozzles and protective lenses. Optional equipment Optical set for laser cleaning – PLN 1500 net. Training materials and support CORMAK provides instructional videos on its YouTube channel to help with machine commissioning and operation. This is valuable support for operators, especially during the initial period of using the device. Technical specifications Parameter Value Maximum laser power 2000 W Laser wavelength 1080 nm Penetration depth (stainless steel at 1 m/min) 4.60 mm Penetration depth (mild steel at 1 m/min) 3.60 mm Penetration depth (aluminium at 1 m/min) 4.10 mm Penetration depth (brass at 1 m/min) 4.10 mm Welding speed 0–120 mm/s Automatic wire feeder Ø 0.8–1.6 mm Maximum power consumption ≤6.05 kW Cooling system Water cooling Operating voltage 230 V Shielding gas consumption Approx. 10–12 L/min depending on wire diameter Dimensions 600 × 1100 × 1100 mm Weight 185 kg

Condition: new, Year of construction: 2024, functionality: fully functional, type of cooling: water, laser power: 350 W, Equipment: documentation/manual, type plate available, New AC/DC Pulse welder with CWF wire feeder, previously on display in the showroom. Gedpfx Ajzu Tv Eengjuh

Condition: excellent (used), Catalog number: 7759 TECHNICAL DATA Circular saw: - max. saw blade diameter 350mm - spindle 30mm - blade adjustable forward/backward, up/down, angle - pneumatic feed of the unit forward/backward - blade guard - motor 2.2kW I and II spindle of the milling machine: - tenon spindle: - spindle diameter 40mm Guodszhvzkjpfx Angsh - working height of the spindle 150mm - spindle locking - pneumatic feed of the units forward/backward - manual adjustment up/down - max. milling cutter diameter 300mm - motor approx. 7.5kW - side carriage – manual feed - carriage dimensions length/width 1000x380mm - angle ruler - pneumatic clamping - dimensions length/width/height 2600/3200 (for shipping 2200) / 1540mm - weight 1450kg ADVANTAGES - Made in Germany - 3-spindle - Unpainted - Very good condition - Used tenoning machine Net price: 13900 PLN Net price: 3230 EUR Net price calculated according to the exchange rate of 4.3 PLN/EUR (in case of larger exchange rate fluctuations, the price may change)

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, inverter welding machine Guodpfszrt E Uox Angoh -Manufacturer: Ess, MIG/MAG gas-shielded welding machine -Type: E1-3300 -Max. welding current: 330 A Features: Water-cooled, remote control Accessories: Hose assembly, ground cable (see photos) -Dimensions: 1020/520/H980 mm -Weight: 116 kg

Condition: good (used), Welding current: 10 - 200 A Weight: 103 kg Gedjyrglcepfx Angeuh Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system -Manufacturer: CLOOS, Qintron water-cooled MIG/MAG welding machine -Type: Qintron 400 -Max. welding power: 400 A -Water-cooled Godpfjx Hgunex Angsuh -Wire feed case: Cloos FC 100E-KIT 4-roller drive -Accessories: incl. ground cable, gas valve, hose assembly (see photos) -Dimensions: 1100/700/H1240 mm -Weight: 181 kg

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, type of input current: three-phase, throat depth: 430 mm, nominal power at 50% duty cycle: 88 kVA, type of cooling: water, overall weight: 279 kg, Electrode holder, electrode arms, transformer and water-cooled electrodes Welding controller with graphic display Medium-frequency technology / inverter Welding controller PY800 Electrode stroke 60 mm Water requirement 9 L/min Gjdpfx Asyvx Hzjngjuh

Condition: ready for operation (used), Rehm Tiger 210 DC Welding Machine Manufacturer: REHM Model: TIGER 210 DC Welding processes: WIG DC / MMA Welding current WIG: 3–210 A Welding current MMA: 3–170 A WIG 100% duty cycle: 175 A (20 °C) WIG 100% duty cycle: 140 A (40 °C) MMA 100% duty cycle: 160 A (20 °C) MMA 100% duty cycle: 120 A (40 °C) Mains voltage: 230 V / 50 Hz You are welcome to visit us for a viewing. We can also arrange affordable shipping for you! Godpozy Eqlofx Angsuh You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.