Used Sicmi Pmm 500 Me for sale (20,758)

Condition: used, maximum load weight: 28,350 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 06/2011, Year of construction: 2011, Approx. 22,500 litre capacity, single-compartment, V2A stainless steel design. 10 t fifth wheel load, 3 x 9 t axle unit. Tank code according to ADR 2009: L4BH. Specification: Cylindrical, self-supporting tank, diameter 1,800 mm, made from V2A stainless steel. Tank internal surface ground smooth to 2B finish. The tank is single-compartment, fitted with 2 baffle walls. The end plates are designed as dished ends. Operating parameters: Operating overpressure 2.67 bar. Test pressure 4 bar. Vacuum resistance -0.21 bar. Operating temperature 50°C. 3 manholes DN 500 with hinged dome covers, each with 6 toggle fasteners. 1 continuous stainless steel overflow box, rubberised to the upper edge. Plastic drainpipes run from the overflow box to the bottom edge of the tank. The drainpipes are equipped with plastic ball valves and plastic hoses. Tank internal rubber lining: The tank is lined internally with HAW W08 rubber lining. Material outlet: At the bottom, a pneumatically operated, coated bottom hatch DN 80, brand Ebro, is fitted. The rubber-lined material outlet is routed to the rear right, equipped with a DN 80 butterfly valve, TW-MK coupling, and a blanking cap. Blow-out device for complete hose emptying provided. Dome fittings: The following fittings are mounted in the dome sump: 1 compressed air connection 2" with 2" shut-off valve. 1 pressure relief 2" with 2” shut-off valve and pipe bend. 1 vacuum valve, brand Hasteloy, with response pressure -0.21 bar. 2 flanges DN 50 with blind flanges for retrofitting a safety valve (required only for transporting hypochlorites). At the rear of the dome sump, a DN 80 flange with blind flange for retrofitting a top discharge is fitted. Compressed air fittings: A 2” plastic compressed air line made of PVDF is routed upwards into the tank. Compressed air system: Lower right. Equipped with pressure gauge, safety valve, non-return valve, and pressure relief/gas rocking connection TW 50. Compressed air connection TW VK 50 with blanking cap. Walkway: On the top left side, a full-length aluminium open grid walkway, width 400 mm, with a stainless steel safety folding guardrail (can be raised from below) and a stainless steel handrail. Rear left, a stainless steel access ladder installed. All tank supports for chassis, fifth wheel plate and landing gear made from electropolished stainless steel. Running gear: Axle unit, brand BPW type ECO, 3 x 9 t disc brakes, Ø 430 mm. The air-suspended, rigid axle unit is mounted in FFB stainless steel suspension brackets. Axle spacing 2 x 1310 mm. A pneumatic raise/lower valve is fitted on a control panel ahead of the first axle on the vehicle. One lift axle, driver-controlled from the cab, with traction aid (up to 30 km/h). Brake system: 2-sensor, 2-module ABS/EBS air brake system with spring-loaded brake cylinders on two axles. Axle load display via CAN bus in the tractor unit display. Tyres: 6 tyres, brand Michelin, size 385/65 R22.5 provided. Hjdpfoy A U Dpjx Ak Dol Rims: Forged aluminium rims, brand Alcoa, type Dura Bright, size 22.5 x 11.75, offset: 0 mm, wheel bolt holes: 26 mm. ADR equipment: Includes: 1 fire extinguisher (6 kg) with holder and protective cover, 1 set of warning signs in compliance with legal regulations, earthing lugs, 1 ground drag, 1 earthing cable reel. Equipment: Electrical installation 24 volt.

Condition: used, Year of construction: 1989, sheet thickness: 8driving power: 18,5weight approx.: 5800messurements (LxWxH): 2130 x 3260 x 2360sheet length: 1550Technical Data: Max. cutting length: 1,550 mm Throat depth (side clearance in frame): 50 mm Sheet passage: 16 mm Hjdpfx Akevaatle Del Cutting angle adjustable: 0.5° – 2°30′ Strokes per minute: 25 – 32 Number of hold-downs: 8 Cutting pressure: 280 bar Oil capacity: 300 liters Total connected load: 20.1 kW Overall dimensions (L × W × H): 2,130 × 3,260 × 2,360 mm Equipment: CNC control SIEMENS S5 for numerical sheet metal backgauge control Sheet support device with motorized scrap separator Sheet discharge with conveyor belt Blade clearance and cutting angle programmable via control Spare blades included Shear blades suitable for material up to 750 N/mm² tensile strength Separate hold-down operation for cutting along marked lines Hold-down pressure adjustable and readable from the front 2 swing-away backgauges Finger guard with handle recess Ball rollers integrated in the support table Angle gauge with vernier scale Foot switch Condition:Used, in good condition

Condition: used, mileage: 446,500 km, power: 375 kW (509.86 HP), first registration: 06/2018, fuel type: diesel, empty load weight: 17,400 kg, maximum load weight: 14,600 kg, overall weight: 32,000 kg, axle configuration: 8x4, wheelbase: 5,600 mm, brakes: engine braking, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 6,500 mm, loading space height: 800 mm, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, parking heater, soot filter, trailer coupling, Volvo FM500 8x4 Flatbed with Hiab X-HiPro 408 Heavy-Duty Crane First registration: 500,000 km with documentation Globetrotter cab with single bed I-Shift automatic transmission Air conditioning, auxiliary heater 8x4 axle configuration Wheelbase: 5,600 mm (1st to 3rd axle) Air suspension front and rear Front tires: 385/55 R22.5, tread approx. 70% Rear tires: 315/70 R22.5, tread approx. 70% Flatbed length: 6,500 mm Side boards: 800 mm Trailer coupling Unladen weight: 17,400 kg Crane: Hiab HiPro 408E6 + Fly Jib 70X-4 Radio remote control 4-point outriggers 10 extensions in total 6 hydraulic extensions on main boom, 4 extensions on jib Lifting capacities: Hedpsy Am H Aefx Ak Del 3.50 m: 10,000 kg 4.50 m: 8,000 kg 6.10 m: 5,600 kg 7.90 m: 4,150 kg 9.80 m: 3,200 kg 11.80 m: 2,550 kg 13.90 m: 2,140 kg 16.10 m: 1,820 kg Hook height without jib: approx. 20 meters With Fly Jib, 4 extensions: 19.00 m: 950 kg 20.50 m: 850 kg 22.10 m: 770 kg 24.10 m: 700 kg 26.00 m: 580 kg 28.00 m: 270 kg (mechanical extension, retrofittable by manufacturer) Hook height with jib: approx. 30 meters The vehicle is from first ownership and is in well-maintained condition. Export / net price: €119,900 All information without guarantee; subject to errors and prior sale.

Condition: used, mileage: 446,500 km, power: 375 kW (509.86 HP), first registration: 06/2018, fuel type: diesel, empty load weight: 17,400 kg, maximum load weight: 14,600 kg, overall weight: 32,000 kg, axle configuration: 8x4, wheelbase: 5,600 mm, brakes: engine braking, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 6,500 mm, loading space height: 800 mm, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, parking heater, soot filter, trailer coupling, Volvo FM500 8x4 Flatbed with Hiab X-HiPro 408 Heavy-Duty Crane Year of registration: .500 KM with documents Globetrotter cab with one bed I-Shift automatic transmission Air conditioning, auxiliary heater 8x4 axle configuration Hsdpfx Ajy Am Hvsk Dsl Wheelbase: 5600 mm (1st axle to 3rd axle) Air suspension front and rear Front tires: 385/55 R22.5, tread approx. 70% Rear tires: 315/70 R22.5, tread approx. 70% Flatbed length: 6500 mm Sideboards: 800 mm Tow hitch Unladen weight: 17,400 kg Crane: Hiab HiPro 408E6 + Fly Jib 70X-4 Radio remote control 4-point stabilizers 10 extensions total 6 hydraulic extensions on main crane and 4 extensions on jib Lifting capacities: - 3.50 m / 10,000 kg - 4.50 m / 8,000 kg - 6.10 m / 5,600 kg - 7.90 m / 4,150 kg - 9.80 m / 3,200 kg - 11.80 m / 2,550 kg - 13.90 m / 2,140 kg - 16.10 m / 1,820 kg Hook height without jib: approx. 20 meters + Fly Jib with 4 extensions: - 19.00 m / 950 kg - 20.50 m / 850 kg - 22.10 m / 770 kg - 24.10 m / 700 kg - 26.00 m / 580 kg - 28.00 m / 270 kg (mechanical extension, retrofittable by manufacturer) Hook height with jib: approx. 30 meters The vehicle is from first ownership and is in well-maintained condition. Export/net price: 119,900 Euro All information subject to change, errors excepted.

Condition: good (used), Heidelberg Eurobind 500 Perfect Binder Machine in very good condition, low mileage, ready for operation. From a state-owned printing house. Manufacturer’s description: Hsdpfoyy Ripsx Ak Del Professional binder for perfect paperback binding. This fully automatic binder features an exceptionally sturdy design and is equipped with a hot glue gun, making it effective even for small and very small quantities of booklets or pages. The Heidelberg Eurobind 500 is a single-jaw binder with automatic cover feeding, which, operated by a single person, delivers impeccably bound books of consistently high quality. It binds books with a thickness of 2 to 50 mm and a spine length of 120 to 320 mm, with a maximum output of up to 500 books per hour. Integrated milling cutter Automatic cover feeding and creasing. The set includes documentation, waste extraction, a compressor, and an electric book delivery system.

Condition: good (used), Year of construction: 2014, operating hours: 760 h, functionality: fully functional, machine/vehicle number: 636676, overall weight: 1,102 kg, load capacity: 240 kg, arm reach: 2,496 mm, This is a KUKA KR 240 R2500 prime industrial robot with KRC4 controller, year of manufacture 2014. We are also happy to offer this robot fully refurbished on request! The robot includes the following options: BoardPackage EthernetKRL Hedpjyykqajfx Ak Del LoadDataDetermination Profinet KRC-Nexxt RemoteService SafeOperation UserTech

Condition: new, Year of construction: 2026, General information Field of application: Construction Weights Empty weight: 5.200 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Fits to following machines: 40-60 TON Delivery terms: CPT, EXW Working pressure: 210 bar Required hydraulic flow: 290 l/min Strike count: 350 Production country: KR Hedpfxsyz Saxs Ak Dol Additional information Please contact Ö. Inalkac for more information AB-1500M (4500kg) hydraulic rockbreaker/ hammer is on stock in our warehouse in The Netherlands. This breaker/hammer is new and with 1 year warranty. All spare parts on stock in our warehouse. Please contact us also for dealership. We are looking for dealers in Germany, Italy, Poland, Portugal, Greece and Bulgaria. You can also contact us for spare parts of other brands! HB3000 HB 3000 HB3100 хидравличен чук hidraulinis plaktukas Hydraulikhammer marteau hydraulique BRH martillo hidráulico ciocan hidraulic hidraulikus kalapács hidraulični čekić martelo hidráulico hydraulické kladivo υδραυλικό σφυρί

Condition: used, mileage: 248,344 km, power: 368 kW (500.34 HP), first registration: 01/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 02/2023, color: blue, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,850 mm, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), navigation system, parking heater, soot filter, Scania R500 XT 6x6 Meiller Three-way Tipper Cabin: * Cabin type: CR with standard roof height * Cabin color: Aurora Blue (RAL5010 CM) * Air conditioning: Premium climate control system with WTA cab heater (3 kW) * Seats: Driver’s seat: Premium, adjustable backrest, ventilated, black velour * Seats: Passenger seat: Folding seat, black velour * Bed: Lower bunk with pocket spring mattress (800 mm, firm) * Mirrors: Electrically adjustable and heated (driver and passenger side) * Roof hatch: Manual with mosquito net * External storage compartments: Driver and passenger side * Refrigerator: Under lower bunk on driver’s side ----Infotainment: * Scania Premium touchscreen radio * NAVIGATION / DAB+ / BLUETOOTH / PHONE / TRAFFIC * Bluetooth: available * Navigation system: with Europe maps ----Electronics and Lighting: * Headlights: LED with automatic dipped beam * Daytime running lights: LED * Fog lights: Halogen * Rear lights: Bulb type ---- * Engine: Scania DC13 155/500 HP (Euro 6) * Power: 368 kW (500 HP) * Displacement: 13 liters * Transmission: GRSO905 with Opticruise and overdrive * Drive type: 6x6 all-wheel drive with engageable front axle * Differential lock: available * Performance modes: Economy, Standard, Off-Road * Hill start assist ---- * Fuel tank: 400 liters (right), material: steel * Exhaust aftertreatment: SCR system with particulate filter (DPF) ----Chassis and Brakes: * Front axle: Parabolic leaf suspension * Rear axle: Parabolic leaf suspension with anti-roll stabilizer * Brakes: Drum brakes with pneumatic control, ABS and traction control * Differential locks ----Body & Attachments: * MEILLER three-way tipper body * BORDMATIK left * Trailer coupling: Rockinger 500B with DouMatic * Hydraulic couplings for trailer operation with control in cab ---- * Front axle tire size: 13R22.5 * Rear axle tire size: 13R22.5 * Fuel tank: 400 ltr. * AdBlue tank: 29 ltr. * Permissible total weight: 29,000 kg * Approved gross train weight: 65,000 / 70,000 kg * Unladen weight: 14,050 kg * Permissible trailer load: 24,000 kg * Overall length: 8,005 mm * Wheelbase: 3,600 mm * Safety inspection due: expired Hsdpfx Ajx Hrflok Djl ----Vehicle No.: 7826 ----Subject to errors and prior sale ----Advertising and various lettering digitally removed. -----We are happy to assist you with all formalities related to the purchase of a vehicle. Please let us know your requests and suggestions, and we will take care of them. Among other services, we offer the following for an additional fee: ----Trade-in of your old vehicle TÜV/Inspection approval Complete export processing Arrangement of financing Application for export license plates Vehicle transfer Vehicle registration Recovery and vehicle transport ----YOUR VTS TEAM

Condition: like new (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, machine/vehicle number: Seriennummer 90319000000, measuring range X-axis: 500 mm, measuring range Y-axis: 300 mm, measuring range Z-axis: 200 mm, Equipment: type plate available, The following components: XM-5000A 3D measuring system / serial number 9031900000. 2 measuring probes. LAPTOP for the XM production measuring system with measuring software on Windows 11. Measuring table for the production measuring system. User manual in German. Hodeyi E Ikepfx Ak Del Measuring range: X: 500 mm, Y: 300 mm, Z: 200 mm Measuring accuracy: (7+9L/100) micrometres Repeatability: ± 3 micrometres The system was only used for a specific measuring application for measuring parts in special purpose machine construction. No use in production. The system was delivered on 20.06.2024 directly from Keyence.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, total length: 1,010 mm, total width: 1,010 mm, total height: 2,010 mm, mesh size: 10 mm, Equipment: CE marking, Our client in Vilnius, Lithuania currently offers 7 complete sets of drying trolleys with trays available from stock. Can be sent one set at a time. Full manufacturer warranty is provided by HySpriz. This is an ideal trolley solution for drying products such as jerky, kabanos, fish snacks, and pet sticks. It is also suitable for fish defrosting processes and even baking applications. The mesh structure ensures excellent air convection through all product levels, resulting in uniform drying and stable product quality. We manufacture in Ukraine a heavy-duty stainless steel drying trolley, specifically designed for industrial and semi-industrial production of meat and fish snacks, raw-cured sausages, jerky, and pet treats. The trolley is fully compatible with RK50U, SAS200, and FARS200 systems and is ideal for use in drying chambers, smokehouses, and climate-controlled environments with air dehumidification. The external dimensions of the trolley are 2000 × 1010 × 1010 mm. The frame is made of corrosion-resistant AISI 304 stainless steel using a robust 40 × 40 × 1.3 mm profile. It includes 30 levels with a 55 mm spacing between tiers and special locking systems to prevent trays from falling during movement. For mobility, the trolley is equipped with six heavy-duty pendulum swivel casters (Ø125 mm), allowing full rotation even when loaded. Each trolley includes 60 stainless steel trays sized 900 × 500 mm. The trays are made of corrugated stainless steel mesh, 5x5 mm. can be optionally equipped with Teflon liners (5,8 EUR/pcs) Wire thickness is 0.7 mm for high rigidity. Each tray has a 15 mm perimeter rim for improved airflow and heat distribution. Reusable non-stick Teflon inserts are included, ideal for sticky or soft products. Hodsrftxfjpfx Ak Dol Total load capacity is up to 400 kg per trolley, with up to 7 kg per tray. The system supports both low-temperature dehydration and high-temperature processing. Compatible with chambers using horizontal or vertical airflow. Designed for easy cleaning, hygiene, and long service life. This trolley ensures efficient moisture removal and uniform air distribution, which directly improves drying performance and final product shelf life.

Condition: new, functionality: fully functional, gearing type: other, fuel type: diesel, color: green, emission class: none, mast type: other, brakes: other, suspension: other, Year of construction: 2026, Equipment: low noise, TICAB Bitumen Emulsion Sprayer – 200 L / 500 L | Professional Asphalt Repair Equipment Designed for professional use, this bitumen sprayer ensures uniform application of bitumen emulsion, asphalt emulsion, tack coat, and bonding agents, significantly improving adhesion and extending pavement service life. TICAB Bitumen Emulsion Sprayer 200 L and 500 L is a reliable and efficient solution for road maintenance, asphalt repair, pothole patching, crack sealing preparation, and surface dressing. Key Advantages: • Tank capacity options: 200 liters / 500 liters • Precise spraying system for even and controlled application • Suitable for bitumen emulsion • Ideal for road repair companies, municipalities, contractors, and utility services • Compact, mobile, and easy to operate Hedpfxex Uxfue Ak Del • Reduces material consumption and labor costs • High-quality components for long service life • Manufactured by TICAB – proven European road equipment manufacturer Typical Applications: • Pothole repair and patching works • Crack sealing preparation • Asphalt bonding layer before paving • Surface dressing and maintenance works • Road, parking lot, driveway, and industrial area repairs TICAB Bitumen Emulsion Sprayers are a cost-effective choice for companies looking for professional asphalt maintenance equipment with excellent performance and durability. Contact us for price, availability, delivery options, and technical details.

Condition: excellent (used), Key Information: Type: Scissor lift / lifting table Load capacity: 500 kg Condition: used – fully operational Controls: remote up/down + emergency STOP Power supply: 230/400V Year of manufacture: 2012 Price includes: complete set as shown in the photos ⚙️ Technical specifications: Load capacity: 0.5 t (500 kg) Lifting height: approx. 630 mm Motor power: 0.8 kW Operating pressure: 196 bar Weight: approx. 170 kg Table dimensions: approx. 90 x 60 cm Power supply: 3-phase 230/400V Protection rating: IP55 🛠️ Description: We offer a professional hydraulic scissor lift – ideal for use in workshops, manufacturing, and warehousing. The device allows for safe and convenient lifting of heavy components to an ergonomic working height. Features include: - Stable scissor construction - Hydraulic lifting system - Remote control (up/down + emergency STOP) Perfect for: - Assembly work - Packing - Service and production - Loading and unloading Hodpfx Aoyw Ua Tjk Dol 📦 Set includes: - Scissor lift - Hydraulic power unit - Controls (remote) 🚚 Shipping: - Pallet shipping - Local pick-up possible

Condition: used, Year of construction: 2009, Fröling Turbomat 500 – Wood Chip Biomass Boiler (2009) ⚙️ Technical Data • Model: Fröling Turbomat 500 • Year of manufacture: 2009 • Rated output: 450 kW (W40) • Maximum output: 495 kW • Water capacity: 750 liters • Operating pressure: 6 bar • Max. temperature: 110 °C • Weight: approx. 6,800 kg • Manufacturer: Fröling Heizkessel- und Behälterbau GmbH – Austria ⸻ 🔩 Key Features • Fully automatic ash removal and heat exchanger cleaning • Four-layer, refractory high-temperature combustion chamber with chamotte lining • Water-cooled feed channel – suitable for fuels with higher moisture content • Stoker grate with continuous, efficient fuel combustion • Lambda control system with multi-zone air management and low emissions • Automatic draft and induction fan control • Heavy-duty industrial construction, maintenance-friendly design • Fuels: Wood chips (G30–G50), pellets, sawdust, biomass ⸻ 💡 Advantages • High efficiency, fully automatic operation • Low maintenance requirements, long service life • Reliable performance even with fuels with higher moisture content • Ideal for industrial and municipal heating systems ⸻ 📍 Location: Mosonmagyaróvár, Hungary TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years’ experience in the heating technology sector. We have a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a continuously available stock of approximately 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – about 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major town on the Hungarian side after the Austrian border. 🔥 Our product range includes: • Wood chip boilers • Pellet boilers • Log wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermoventilators • Hot air blowers Hedpfx Akexmrwfs Del • Warm air heaters • Industrial heating systems • Buffer tanks • Heat exchangers • Auger conveyors • Discharge systems • Burners • Pumps • Comprehensive heating accessories ⚙️ Accessories and Components: We also carry a large selection of accessories, including circulation pumps, plate heat exchangers, and many other components – from residential to industrial solutions. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus and many more. 🌐 Current Offers: Most of our current offers can be found on our website: topheatingsystems.com In addition, we have further units available that are not yet listed online. 📅 Viewing: Viewings at our warehouse are available by prior appointment. If you are interested, please contact us – we will be happy to help you find the right solution.

Condition: used, axle configuration: 3 axles, first registration: 05/2008, total length: 110 mm, total width: 2,450 mm, total height: 3,750 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2008, Equipment: ABS, = Additional options and accessories = - EBS - Alloy wheels = Remarks = Number of axles: 3, Own weight: 6,600 kg, Gross weight: 34,000 kg, Type of chassis: Complete chassis, Chassis material: Stainless steel, Kingpin size: 2 inch, Alloy wheels, Suspension type: Air suspension, ABS, EBS, Superstructure year: 2008, Superstructure material: Aluminium, Side wall material: Insulated, Drum capacity: 38,000, Compartment division: 1 compartment, Cargo type: Heated liquids, 31,500 LITERS OF BITUMEN = Further information = General information Cab: Day cab Registration number: KLEYN1 Driveline Fuel type: Diesel Transmission Transmission: Manual Axle configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tyre tread left: 5 mm; Tyre tread right: 5 mm Axle 2: Tyre tread left: 10 mm; Tyre tread right: 12 mm Axle 3: Tyre tread left: 6 mm; Tyre tread right: 8 mm Weights Unladen weight: 6,600 kg Payload: 27,400 kg Gross vehicle weight: 34,000 kg Environment Emission class: Euro 0 Condition General condition: Average Technical condition: Average Visual condition: Average Damage: None = Company information = Hodpfx Aoywgbpok Dsl Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a continuously changing stock of 1,200 used trucks, tractor units, and trailers. Our range covers all European brands, model years, and price categories. Why buy at Kleyn Trucks? Simple! • Large, fast-changing stock • Recognisable quality • Competitively priced • Professional business conduct • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration numbers arranged quickly • Expert technical services • The security of “recognisable quality” • And much more... Please visit our website for special offers and the complete inventory: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit an enquiry via our website. Ask directly about our European warranty package.

Condition: used, mileage: 735,000 km, power: 368 kW (500.34 HP), first registration: 01/2014, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Scania R500 6x2 hooklift truck, Meiller AK16 MT body, remote control, CR19 cab, Euro 5, Opticruise gearbox with clutch, retarder, leaf-air suspension, leading steering lift axle, trailer coupling, air conditioning, heated seats, auxiliary heater, light bar, vertically mounted exhaust, roof hatch, vehicle base color is blue / wrapped in white film. Last inspection (S) at 698,000 km. Hedjxarrijpfx Ak Dol

Condition: good (used), Renz ABL-500 Automatic Spiral Binding Machine A powerful machine for the production of calendars, notebooks, and other metal spiral-bound products. The machine automatically feeds the spiral, cuts the spiral into pre-defined lengths, inserts the hanger, and clamps the binding. Max. feeder size: 500 x 700mm Min. feeder size: 70 x 135mm Max. thickness: 15mm Hjdeywdugjpfx Ak Dol Table with folded sheet feeder Automatic hanger loading and mounting Automatic wire pick-up from the roll with wire spacer removal Closing module Delivery Central controller for the entire machine Capacity up to 2500 cycles/h 380V power supply + compressed air The machine has a central lubrication system. Weighs 1300kg Includes many additional components, tools, and documentation.

Condition: good (used), Renz Autobind AB 700 + KAS 500 Semi-Automatic Spiral Binding Machine Machine in very good condition, ready to operate. Efficient semi-automatic machine for the production of calendars, notebooks, and other metal spiral-bound products. Hedpfx Aksywdrfs Djl Fast operation Spin diameters range from 3/16″ to 1 1/8″ Working width up to 700 mm Crimping thickness approx. 23 mm Capacity up to 1200 cycles/hour The semi-automatic machine unwinds the spiral from the spool, counts the stitches, cuts the spiral to the pre-set stitch count, and transfers the spiral section to the crimping area. The operator places the pre-perforated calendar on the table. The calendar is automatically transferred to the crimping area by pressing the pedal. Includes a KAS 500 hanger feeder Power supply: 230V + compressed air Weight: 615 kg.

Condition: good (used), Rilecart R-500 Semi-Automatic Spiral Binding Machine Efficient semi-automatic machine for producing calendars, notebooks, and other metal spiral-bound products. The machine automatically feeds the spiral, cuts the spiral into pre-defined sections, inserts the hanger, and clamps the binding. Hsdpfx Aeywdntok Dol Maximum binding width: 500 mm; minimum: 50 mm Automatic hanger loading and installation Capacity: up to 1500 cycles/h Power supply: 230V + compressed air Made in Italy. Weight: 450 kg

Condition: used, Year of construction: 1996, - Brand : Omme Hodpfeyy Dmbjx Ak Del - Type: 2500 EBDZ - Year built: 1996 - Weight: 2880 kg. - Hours: 587 hours - Drive: Kubota diesel + Battery + 220 volt - Working height: 25 meters - Lateral reach: 12.7 meters - Wheel Drive / Movers - Extra nose wheel - Stamp plates 4x - Drive plates 4 x - Dutch license plate - second owner - Safety inspection possible - Aerial work platform book available - Maintenance history dealer present - CE document available - Trade-in and transport possible - Video on our website * Brand: around *Type: 2500 EBDZ * Construction year: 1996 * Weight: 2880 kg. * Lateral reach: 12.7 meters * Working height: 25 meters * Hours: 587 uur

Condition: used, mileage: 798,985 km, power: 368 kW (500.34 HP), first registration: 04/2017, fuel type: diesel, empty load weight: 11,200 kg, maximum load weight: 14,800 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,800 mm, next inspection (TÜV): 05/2026, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, compressed air brake, cruise control, differential lock, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, parking heater, power assisted steering, seat heater, soot filter, traction control, trailer coupling, * German vehicle * 1st owner * Condition: see photos * Body: Meiller roll-off tipper, type RS 2170 * 20 t payload capacity * Container max. length: 7 m * Pneumatic locking system * Underrun protection * Trailer coupling * Towing capacity: 26,470 kg * Gross train weight: 44,000 kg * XXL driver‘s cab with two beds and two seats * Air conditioning * Retarder * Auxiliary heater * Refrigerator * Liftable trailing axle * Leaf/air suspension with raise/lower function * Adaptive cruise control * Touchscreen navigation * Hill start assist * Multifunction steering wheel * Lane departure warning system * Emergency braking assist * Air-suspended comfort seat * Seat heating * Differential lock * Electric window lifts * Electrically adjustable and heated mirrors * Roof hatch * ABS/ASR/ESP * RIO Box * Storage box * Work lights * Wheelbase: 4,800 + 1,350 mm Hodpfex Rz Eiox Ak Del * Gross vehicle weight: 26,000 kg * Unladen weight: 11,200 kg * Payload: 14,800 kg If a new TÜV inspection is desired, we will be happy to provide you with an offer from our partner workshops. Our offer generally does NOT include a new TÜV inspection, DGUV, SP, or UVV. You can find further trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and highly recommend a viewing and inspection of the goods to avoid any misunderstandings regarding condition or suitability. Viewing and inspection can be arranged by appointment at any time and are expressly encouraged. All information provided without guarantee. We accept no liability for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to change, prior sale, and errors.

Condition: good (used), 1x Arburg 320C 500-170 with Multilift, safety fence, and discharge conveyor. Sold without Z-belt conveyor, temperature control units, and Koch vacuum loader. The machine is available at short notice by arrangement. Hsdpfxsyym Saj Ak Dsl

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: W202001, table length: 800 mm, table width: 550 mm, Equipment: documentation/manual, H-Frame Press – 30 t – Double-column Press – 800 × 550 mm – Versatile Assembly & Production Press For sale: hydraulic double-column press (H-frame press) with a pressing force of 30 t. The machine is highly versatile and can be used as an assembly press, small batch press, hand-loading press, vulcanizing press, or heated platen press. This is an approximately 2.5-year-old, unused machine with zero operating hours, offered with full warranty. Inspection is possible at our warehouse in Ennepetal. ===== Technical Specifications & Information: Hydraulic Double-Column Press – 30 t ==== General Information - Design: Double-column press (H-frame) - Pressing force: 5–30 t (adjustable) - Machine weight: approx. 2,000 kg Hsdpfju U Ey Isx Ak Dol - Paint finish: RAL 7035 (Light Grey) / RAL 2009 (Orange) ==== Working Area - Table size: 800 × 550 mm (additional variant: 700 × 500 × 70 mm) - Ram plate: 700 × 500 × 80 mm - Max. distance table/ram: 500 mm - Stroke: 500 mm - Front opening width: 820 mm - Table height: 800 mm ==== Speeds - Approach speed: approx. 45–50 mm/sec - Return speed: approx. 40–55 mm/sec ==== Hydraulics - Operating pressure: up to 300 bar - Hydraulic pump: ASC, 28.5 l/min - Motor power: 11 kW - Oil tank: approx. 100 l - Valves: Bosch Rexroth ==== Construction & Guidance - Cylinder: Ø 110 mm (piston), Ø 70–75 mm internal - Guide columns: Ø 50 mm - Ram guided by 2 columns - Robust machine frame - Rear and side guards fully enclosed ==== Control & Operation - Pressing pressure adjustable via rotary control - Adjustable two-hand operation (3 m supply cable) - Position limitation via cam switch - Travel limitation via movable sensors - Automatic positioning to defined stroke points - Resettable piece counter ==== Safety - Light curtain 500 mm (14 mm resolution, finger protection) - Reach-under protection - Optional reach-over protection - Emergency stop switch - Certified safety inspection ==== Equipment - Control cabinet technology from brand manufacturers - Illumination in press workspace - Eject chute in table ==== Options - Heated platens: 500 × 500 mm (up to 200 °C, with controller & timer) - Commissioning & operator training ==== Lead Time & Service - Delivery time: approx. 6 weeks (without heated platens) - Heated platens: approx. 8 weeks - Customer service: Dresden, Hamburg, Ennepetal, Waibstadt, Göppingen, Gelsenkirchen ===== Assembly work, small batch production, forming applications, vulcanizing, hot pressing Hydraulic press, hydraulic press, double-column press, H-frame press, assembly press, small batch press, vulcanizing press, heated platen press, industrial press Are you looking for a hydraulic press customized for your application? Contact us for a tailored offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC regulations, and EU safety standards. Additionally, our presses exceed both Canadian and European safety requirements, as they fully comply with the Brazilian occupational safety standard NR 12, which builds upon these regulations. Our core strengths are special machine engineering and press automation. We offer custom-built hydraulic presses at surprisingly attractive prices. The hydraulic systems primarily use components from leading European manufacturers.

Condition: used, mileage: 714,514 km, power: 368 kW (500.34 HP), first registration: 07/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 01/2026, brakes: retarder, color: blue, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, Scania R500 LB6x2HNA MEILLER RK 20.65 AK----Equipment: * Cab type: CR (high roof) * Blaupunkt CD radio * Bluetooth hands-free system * On-board computer with multifunction steering wheel * Air conditioning * Auxiliary heater * Refrigerator * Electric sunroof * Sun visor * Additional headlamps * Fog lamps * Daytime running lights with LED DRL & position lamps * Spotlights integrated in external sun visor? ----* Engine: DC16 19 / 500 hp, Euro 5, 16-liter displacement * Transmission: GRS905R with Opticruise * Retarder (RETscania2, Type R3500) * Clutch: Automatic, Type K432 26 * Axle configuration: 6x2 * Wheelbase: 4500 mm ----* Hill start assist * Level control: Quick, remote controlled * Speed limiter: Yes (85 km/h) * Brake control: Electronic (EBS5) * ABS/EBS: 6S/5M ----* Liftable trailing axle * Rear axle differential lock * Leaf/air suspension ----Bodywork: * MEILLER RK20.65 AK (defective) * Ringfeder 4045, 40 mm pin Hodpeyygxgsfx Ak Del ----* Tire size front: 315/80R22.5 * Tire size rear: 315/80R22.5 * Fuel tank: 600 liters * AdBlue tank: 75 liters * Technical gross vehicle weight: 26,500 kg * Curb weight: * Perm. trailer load: 24,000 kg * Overall length: * Wheelbase: 4,500 mm * SP inspection due: ----Vehicle number: 11973----Errors and prior sale excepted----Advertising and various decals have been digitally removed.-----We are happy to assist you with all formalities related to vehicle purchase. Simply send us your requests and suggestions and we will take care of them. Among other services, we can offer you the following at extra cost: ----Trade-in of your old vehicle TÜV/SP inspection Complete export processing Financing arrangements Application for export license plates Transport of vehicles Registration of vehicles Vehicle recovery and transport---- YOUR VTS TEAM

Condition: excellent (used), mileage: 770,076 km, power: 265 kW (360.30 HP), first registration: 06/2010, fuel type: diesel, axle configuration: 6x2, wheelbase: 5,450 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, number of seats: 2, total length: 9,220 mm, total width: 2,530 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2010, XLEG6X20005235679 = More information = General information Cab: single Registration number: BX-PT-28 Technical information Number of cylinders: 6 Engine capacity: 12.740 cc Axle configuration Hedpfx Akeyycfpo Dol Max. front axle load: 9000 kg Rear axle 1: Max. axle load: 11500 kg Rear axle 2: Lift axle; Max. axle load: 7500 kg Weights Empty weight: 11.760 kg Carrying capacity: 16.340 kg GVW: 28.000 kg Condition Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours.Prices do not include VAT.No rights may be derived from the information provided.Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber.Mobile: Available via WhatsApp and Viber.When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information.If in doubt, please call us so we can verify the invoice and/or payment.Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: like new (used), Year of construction: 2023, turning diameter 620 mm turning length 1500 mm control Siemens 808D spindle bore 100 mm turning diameter over slide 420 mm spindle turning speed range 10 - 4000 U/min main drive 41 kW rapid traverse speed 10000 mm/min total power requirement 65 kW Hedpfolar N Nsx Ak Dol weight of the machine ca. 9 t dimensions of the machine ca. 6,4 x 3,0 x 2,5 m Control unit CNC Siemens 808D new Drives/Servomotores, 24 month warranty on equipment - Chip Conveyor - Tool cooling system - Tailstock - Tool changer (Tower) with 8 positions OPTIONAL INCLUDED - - piece support (Lunete)