Used Shovel for sale (240)

Condition: new, machine/vehicle number: 8b1f4087611d72661dc0b3869, empty load weight: 4,750 kg, maximum load weight: 30,250 kg, overall weight: 35,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,000 mm, suspension: air, tire size: 385/65 R 22.5, Further information Chassis Semi-Tipper Fine-grained steel welded construction in basic lightweight design, kingpin plate with replaceable 2-inch kingpin Curved front end (patented) 24t 2-speed landing gear, single-sided operation, with straight base, without thrust compensation Foldable underrun protection Half-shell mudguards Tow hook at rear Ppjdpfxoi Ri Nfo Ahyer Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser alignment to reduce tire wear and fuel consumption Axles in off-road specification Air suspension 1st axle automatic lift axle, including forced lowering and starting aid Hot-dip galvanized lift axle mechanism, 10 years warranty against rust-through Braking System 2-line compressed air braking system, color-coded lines for easy service Spring-loaded parking brake 2 fail-safe coupling heads at front, without connecting line EBS, Electronic Braking System with EBS socket at front (no connecting cable included) Note: The trailer may only be towed by tractors that ensure the effectiveness of the ABS! With raise & lower valve Vehicle stability system Wheels and Tires 385/65 R22.5 Steel rims, factory silver TPMS (Tire Pressure Monitoring System) according to ECE R 141, display via the tractor display, via EBS, without truck installation (prerequisite must be met in the truck. Only for standard tires) Electrics 24 Volt, multi-chamber lights, side yellow LED lighting Side yellow LED lights coupled with turn signal "flashing side marker lights" 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck PTO Tipping Body Steel round body in Stone Master design made of highly wear-resistant HB 400/450 steel. Inclined front wall with external hydraulic unit and access at the front wall Greenline - conical and aerodynamic body shape Shovel and broom holder outside on the front wall Membrane rear wall Rear wall as pendulum flap with double-joint hinge, external with double hook locking. 2 clamping screws with wing latches at the lower sides Side walls 4 mm thick throughout, floor 4/5 mm thick, wear and weight-optimized construction Standing platform with access, connection plate for air/electricity and brake with large clearance for best possible operability Roll tarp stored to the right, with central locking on the left Country of Registration/Plates Germany With Dekra inspection and report (according to §13 EC-FGV) Body strength according to EN 12642 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau (Nova grey) 10 years warranty against rust-through Landing legs black coated Body in desired RAL color, single color Roll tarp in desired RAL color, single color Available with thermal insulation version!

Condition: new, machine/vehicle number: 2f960ff7c44de83fd060ec5df, empty load weight: 6,750 kg, maximum load weight: 32,250 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space width: 2,480 mm, loading space height: 2,150 mm, loading space volume: 50 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 3,670 mm, suspension: air, tire size: 385/65 R 22,5, Further information Chassis Tipper Semi-Trailer Fine-grain steel welded construction, in Basic lightweight design, fifth wheel plate with replaceable 2" king pin Patented curved front wall 24 t, 2-speed landing gear, single-sided operation, with straight base, without sliding compensation Wheel chocks with holders Foldable underride guard Half-shell mudguards Integrated mudguard bracket with stone-repellent surface Tarpaulin pole with holder Tow hook at rear Axles & Suspension BPW disc brake axles with 430 mm disc diameter Axles/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and starting aid Hot-dip galvanized lift axle mechanism, 10 years warranty against rust-through Brake system 2-line air brake system with color-coded line layout for easy service Spring-loaded parking brake 2 interchangeable coupling heads at front, without connecting line EBS, electronic braking system with EBS socket at front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Wheels and Tires 385/65 R22.5 Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display via towing vehicle display through EBS, without truck installation (must be pre-equipped on the truck. Only applies to standard tires). Electrics 24 Volt, multi-chamber lights, side yellow LED lighting Side yellow LED lighting combined with indicator function 'blinking side markers' 2 x 7-pin interchangeable sockets at front, without connecting cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operated hydraulically via truck PTO Pedpfx Ahsi Rizfeyepr Body/Tipper body Steel box body made of highly wear-resistant HB 400 steel, inclined front wall with external hydraulic cylinder mount. Shovel and broom holder outside on front wall. Interior with climb access on the front wall. Continuous 3 mm side walls, 3 mm continuous floor Membrane tailgate Internal width at bottom approx. 1440 mm Aluminum tailgate with 'double joint hinge', split 1/2 to 1/2, with swing arm at top, each leaf equipped with a grain chute. Standing platform with access, connection plate for air/electric and brake with large clearance for optimal handling. Roll tarp stored on right side, central locking on left side Registration country/plates Germany Approval according to EC 2007/46 Body strength according to EN 12642 24/7 service hotline Prepared for single-line license plate holder Warning panel according to ECE - 70 Contour marking stripes according to ECE R 048, side white and rear red Paintwork Frame: DB 7350 Nova Gray '10-year warranty against rust-through' Body: RAL of choice, single color Roll tarp: RAL 7035 light gray

Condition: new, machine/vehicle number: 113bec9dd54d24fa34a088424, empty load weight: 4,400 kg, maximum load weight: 28,600 kg, overall weight: 33,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space height: 1,750 mm, loading space volume: 30 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,400 mm, suspension: air, tire size: 385/65 R 22,5, Further information Chassis, Semi-Tipper Fine-grain steel welded construction in lightweight design; fifth wheel plate with replaceable 2-inch kingpin Patented curved front wall Psdpfx Ahei Rizijyjpr 24 t two-speed landing gear, single-sided operation, with straight lower part, without load compensation 2 wheel chocks with holders Folding underrun protection Half-shell mudguards Tarp bar with holder 2 rear towing hooks Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser alignment to reduce tire wear and fuel consumption Axles in off-road version Air suspension 1st axle with automatic lift axle function, including forced lowering and traction aid Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Brake System 2-line air brake system, color-coded piping for easier servicing Spring-actuated parking brake 2 anti-mistake coupling heads at the front, without connecting line EBS (Electronic Braking System) with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of ABS! With raise and lower valve Vehicle stability system Wheels and Tires 385/65 R22.5, brand at manufacturer’s discretion Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display through towing vehicle dashboard via EBS, does not include truck installation (Truck must be equipped accordingly; applies only to standard tire fitment). Electrical System 24 Volt, multi-chamber tail lights, side-mounted amber LED lighting Side amber LED lighting linked to indicators ("flashing side marker lights") 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin anti-mistake sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest section hard-chromed, with HDK screw coupling, fixed part, nominal width 48 mm (without hose connection) Operated hydraulically via truck PTO Body Aluminum box body, high-quality, wear-resistant; front wall 5 mm thick, with external end walls made from 30 mm hollow chamber profiles, neatly welded, with spill-resistant top rail profile. Interior includes ladder on the front wall (not in combination with Cramaro cover system). External shovel and broom holder on front wall Greenline – conical and aerodynamic body shape Membrane – tailgate Tailgate as pendulum flap with double-joint hinge, externally mounted with double hook lock Tailgate with rubber seal (note: heat resistant up to max. 170°C!) Continuous floor, 6 mm thick Standing platform with ladder, connection plate for air/electric and brake with ample space for optimal operation Roll tarp, stowable on right side, with central lock on left side Registration Country/Plates Germany With Dekra certificate and inspection report (according to §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on sides, red at rear Paintwork Frame: DB 7350 Novagrau "10-year warranty against rust-through" Body: Single color as desired (RAL) Roll tarp: RAL 7035 light grey

Condition: new, machine/vehicle number: aaa375d3c15c697ac80fb51f9, empty load weight: 7,900 kg, maximum load weight: 31,100 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space width: 2,330 mm, loading space height: 1,950 mm, loading space volume: 50 m³, total length: 11,200 mm, total width: 2,550 mm, total height: 3,470 mm, suspension: air, tire size: 385/65 R 22,5, Further information Chassis Semi-trailer Tipper Fine-grain steel welded construction, lightweight design, with slight offset, fifth wheel plate with replaceable 2" kingpin 24-ton 2-speed landing gear, single-sided operation, with straight lower section, without sliding compensation Wheel chocks with holder Foldable underrun protection Half-shell mudguards Integrated mudguard holders with stone-repellent surface Tarp rod with holder Tow hook at the rear Ppjdpfx Ahji Rizqeyjr Axles & Suspension BPW disc brake axles with 430 mm disc diameter Axles and running gear laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and starting aid Hot-dip galvanized lift axle mechanism with 10-year warranty against rust-through Braking System 2-line compressed air brake system with color-coded hoses for easy maintenance Spring-actuated parking brake 2 non-interchangeable coupling heads at the front, without connector line EBS (Electronic Braking System) with EBS socket at the front, without connector cable Note: The trailer may only be towed by tractors that ensure the effectiveness of the ABS! With raise & lower valve Vehicle – driving stability system Wheels and Tires 385/65 R22.5 Steel rims, factory silver "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via tractor dashboard (via EBS, without truck installation — vehicle must support this; only for standard tires) Electrics 24 volt, multi-chamber tail lights, side yellow LED lighting Side yellow LED lighting linked to indicators – flashing side marker lights 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin non-interchangeable sockets at the front, without connector cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Hydraulic actuation via truck PTO Body Steel half-pipe body made of highly abrasion-resistant HB 400 steel, inclined front wall with external hydraulic cylinder mount. Folding aluminium splash guard on front right for tarpaulin. Shovel and broom holder mounted on exterior of front wall. Access inside at the front wall. Side walls continuous 4 mm thick, floor continuous 5 mm thick Membrane-type rear wall Rear wall with 2-leaf door division 1/2 to 1/2, with 1 slider in the right leaf With external locking bar and mechanical bottom lock Standing platform with access ladder, connection plate for air/electric and brake with ample space for optimal handling Tarpaulin rolls to right side (FR-right), with central locking on FR-left Registration country/License plates Germany Type approval according to EC 2007/46 Body strength in compliance with EN 12642 24/7 service hotline Prepared for single-line license plate holder Warning panel according to ECE - 70 Contour marking with reflective tape according to ECE R 048, side white and rear red Painting Frame: DB 7350 Nova Grey 10-year warranty against rust-through Landing legs: black coated Body: RAL as requested, single color Tarpaulin: RAL 7035 light grey

Condition: new, machine/vehicle number: 4499ca1b286f9f653066b5693, empty load weight: 4,900 kg, maximum load weight: 30,100 kg, overall weight: 35,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,150 mm, suspension: air, tire size: 385/65 R 22.5, Further Information Chassis Semitrailer Tipper Fine-grained steel welded construction in basic lightweight design, kingpin plate with exchangeable 2'' kingpin Patented curved front wall 24t two-speed landing gear, single-sided operation, with straight base section, without thrust compensation Foldable underrun protection Half-shell mudguards Towing hook at rear Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axles/chassis laser-measured to reduce tire wear and fuel consumption Pedei Ri Nijpfx Ahyspr Axles in off-road configuration Air suspension 1st axle with automatic lift axle function, including forced lowering and traction aid Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Brake System 2-line compressed air braking system with color-coded line routing for easy servicing Spring-loaded parking brake 2 foolproof coupling heads at the front, without interconnecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! With raise/lower valve Wheels and Tires 385/65 R22.5 Steel rims, factory silver "TPMS" Tire Pressure Monitoring System compliant with ECE R 141, display via truck dashboard through EBS, without truck installation (the system must be pre-equipped in the truck; only on standard tires) Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights Yellow LED side marker lights linked with indicator – "flashing side marker lights" 2x 7-pin foolproof sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (no hose connection included) Operated hydraulically via truck PTO Body Steel round trough in Stone Master design made from highly wear-resistant HB 400/450 steel. Slanted bulkhead with external hydraulic components and ladder at the bulkhead. Greenline: conical and aerodynamic trough shape Shovel and broom holder outside on the bulkhead Membrane – Tailgate Tailgate as swinging door with double hinge, externally mounted, with dual hook locking. 2 clamping screws with T-handle locks at the bottom sides. Side walls throughout 4 mm thick, floor 4/5 mm thick, wear and weight-optimized design Standing platform with ladder, connection plates for air/electric and brake lines with ample space for optimal operation Roll tarp stows to right-hand side, with central locking on the left-hand side Registration / Licences Country: Germany With DEKRA approval and certification (according to §13 EG - FGV) Body strength per EN 12642 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective striping per ECE R 048, white at sides, red at rear Painting Frame: DB 7350 Nova Gray 10-year warranty against rust-through Support legs: black coated Trough in RAL color of choice, single color, subject to availability Roll tarp in RAL color of choice, single color Also available with hydraulic tailgate.

Condition: used, maximum load weight: 28,070 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2021, next inspection (TÜV): 08/2026, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Knapen Moving Floor Trailer K100 92m³ 10mm Floor General Manufacturer: Knapen Trailers * Model/Type: K100 A5060 * Year of manufacture: 2020 * Chassis number: XPNK0C100LD071956 202003-0071956-r_order-configur? * Country of registration: Germany * Unladen weight: approx. 7,924 kg 202003-0071956-r_order-configur? * Gross vehicle weight rating: 36,000 kg 202003-0071956-r_order-configur? * Maximum axle load: 24,000 kg * Maximum kingpin load: 12,000 kg (permitted in country of registration) * Volume: approx. 91.9 m³ * Tapered moving floor semi-trailer * Axle configuration: rigid/rigid/rigid ----Dimensions External length: 13,670 mm * External width: 2,550 mm * External height: 4,000 mm * Internal height front: 2,690 mm * Internal height rear: 2,785 mm * Fifth wheel height: 1,150 mm * Kingpin to 2nd axle: 7,750 mm * Axle spacing 1st/2nd axle: 1,310 mm * Axle spacing 2nd/3rd axle: 1,310 mm ----Axles & Running Gear 3 x SAF 9 t Intradisc+ Integral CD Off-Road Axles * All axles rigid * Disc brakes Ø 430 mm * 10-bolt wheel connection * Air suspension with standard control panel on the left before the axles * Axle function as lift axle, fully automatic via EBS * Including traction aid (3x brakes) * Radio remote control for lift axle ----Tyres & Wheels* Goodyear KMAX T * Tyre size: 385/65 R22.5 * Steel rims 22.5" x 11.75 Ppodpfxjymhxgo Ahysr * 6 wheels in total * No spare wheel ----Bodywork Closed side walls left and right * Sliding partition wall (minimum ground clearance 100 mm) * Rear doors with external locking bars * One locking bar per door * Steel top rail, extendable left and right * Platform at front bulkhead * Ladder on front bulkhead left and right * Standard roof bows Ø 60.3 mm (4 pieces) * Bow space: 3 x approx. 4,100 mm * Curtain 680 g/m² (RAL 9006 White Aluminium) * Curtain supports 3-position (4 pieces) * Tensioning straps (4 pieces) ----Floor / Moving Floor Cargofloor System CF-500 SL-C * Electric operation * Corrugated aluminium floor boards 10 mm (21 boards) * Fixed front plate * Stainless steel plate at rear under the floor ----Mounting Parts JOST landing gear with thrust compensation * Plastic toolbox left in front of axles (1,000 x 500 x 500 mm) * 30 l water tank with soap dispenser * Contiguous side underrun protection * Swinging mudflaps * Antispray mat on 3rd axle * Long rear-mounted ladder with extendable stair and platform * 2 x wheel chocks left * Broom and shovel holder right ----Lighting 6 x round LED tail lights (3-chamber) * LED fog and reversing lights * LED side marker lights (4 pairs) * LED marker lights at rear * Reflective contour marking according to EU regulation * LED work lights at rear (radio-controlled) * LED work lights on landing gear (radio-controlled) * LED LCG-2 switch unit ----Hydraulics / Connections ISO-N and ISO-S plug + 15-pin connector * Knapen Trailers V1 radio remote control * Hydraulic connections centrally on front bulkhead (vertical) * Pressure line left, return line right * Additional hydraulic connections at landing gear * Brake connections present * Audible reversing alarm (manual setting) ----Paintwork Bodywork in RAL 7011 Iron Grey * Wheel hubs in RAL 2008 Light Red Orange * Chassis and underside unpainted For further information, please feel free to contact me.

Condition: used, maximum load weight: 32,246 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 04/2025, next inspection (TÜV): 04/2026, loading space length: 13,110 mm, loading space width: 2,400 mm, loading space height: 2,650 mm, loading space volume: 86 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2025, Equipment: ABS, STAS 3-Axle Hardox Steel Tipper 86 m³ First Registration 04/2025 Internal Dimensions (LxWxH): 13,110 x 2,350 / 2,450 x 2,770 mm (tapered design) Unladen weight: 9,640 kg Floor made entirely of 5 mm Hardox steel HB450 Front and side walls made of 3 mm Hardox steel HB450 Pneumatically folding rear underrun protection Straight front wall, with interior access ladder Rear portal doors 50:50 with pneumatic sequential unlocking Reinforced roof tarpaulin HYVA tipping cylinder, Alpha type, low pressure 2x pneumatic vibrators JOST crank landing gears, full load SAF axles with large 430 mm disc brakes 1st axle: LIFT AXLE WABCO Trailer EBS with RSS roll stability control WABCO Smartboard Lifting and lowering device Pjdsygdvhjpfx Ahyspr Automatic tipping lowering function Tyres: 6 x 385/55 R 22.5 ALCOA Dura-Bright high-gloss aluminium rims Aluminium access ladder Shovel and broom holder Left side toolbox 4x LED reversing lights RENTING is the new BUYING – also available immediately with full-service rental.

Condition: used, mileage: 3,450 km, power: 213 kW (289.60 HP), first registration: 01/2026, fuel type: diesel, overall weight: 18,000 kg, tire size: 316/60R22,5, tire condition: 100 %, axle configuration: 4x2, wheelbase: 5,075 mm, color: yellow, driver cabin: day cab, gearing type: mechanical, suspension: steel-air, number of seats: 3, loading space length: 6,500 mm, loading space width: 2,500 mm, Equipment: ABS, additional headlights, air conditioning, central locking, crane, cruise control, differential lock, fog lights, hydraulics, onboard computer, soot filter, spoiler, trailer coupling, Stock vehicle immediately available. Hire-purchase: EUR 2,995.00/month, special down payment: EUR 39,500.00, term: 72 months, final installment: EUR 54,800.00. ----- Hydraulic sliding platform steel STBP6000, hydraulic wheel-lift STH50.2, hydraulic winch shift, hydraulic winch 6.8 t front platform, hydraulic rear frame winch 5 t, two mobile auxiliary ramps, Rockinger coupling system, tow hitch with ball head at rear, body fully hot-dip galvanized, 5 lockable stainless steel (V2A) storage boxes, 1 stainless steel (V2A) control box with lever cover, Twin Power LED work lights on flyer, LED work lights at rear, LED interior lighting in control box, professional radio system, full radio control for body and winches, 12 + 24 V jump-start system rear and side, FULL LED warning light bar ~2000 mm wide, front strobe lights mounted in bumper, rear strobe lights integrated in flyer, extendable waste and binder container, shovel and broom holder, truck tow bar with holder, side AERO paneling 500 mm high painted in vehicle color, Optimum Paint Package – add-on parts painted in vehicle color, air suspension on rear axle, rear axle differential lock, MAN Ambiente Package with air conditioning, MAN Electric Package, truck with many special features, HMF loader crane 2130 T RC with radio control, crane hydraulic reach approx. 12.2 m, additional hydraulics for 4 grab functions, and much more. For further information about the vehicle on offer, request a detailed quotation. Ask about our attractive hire-purchase, leasing, or full-service rental offers. Our general terms and conditions apply. Subject to prior sale. Financial services offers subject to positive credit assessment and only for GERMAN commercial enterprises. More info also available under: full paneling, tilting upper structure, double passenger seat, crane, for rental, PTO, right power mirror, air seat, twin tires, sun visor, tachograph, day registration, 2-door, Euro 6b, green environmental sticker (4), rental possible, Tipt Ppodpfoylzpvex Ahysr

Condition: new, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,200 mm, loading space height: 2,500 mm, loading space volume: 50 m³, Year of construction: 2025, Equipment: ABS, Reisch 3-Axle Tipper Semi-Trailer Aluminum Large-Volume Body 50m³ AluBox-R---- The vehicle is brand new, unused, and not yet registered. Equipped with aluminum package, consisting of: - Aluminum rims Alcoa - Aluminum drop-down support legs JOST - Aluminum air tank Technical Data (Equipment): - Body dimensions: approx. 9,200 x 2,200 x 2,500 mm - Volume: approx. 50m³ - Saddle height: approx. 1,150 mm (unladen) - Tare weight: approx. 5,980 kg (without spare wheel) - Superstructure painted in RAL 7004 grey - Chassis painted in RAL 9005 deep black - Axle assembly: SAF INTRADISC CD Ø430 ET120 disc - Axle lift acting on 1st axle - Traction assist acting on 1st axle - 6x Bridgestone Duravis RT-2 tires, 385/65 R22.5 (road version) without spare wheel - Aluminum rims Alcoa LVL ONE - Wheel nut covers - Frame made from S 700 steel - Drop-down support legs, aluminum (manufacturer: JOST) - Manually foldable underrun protection, aluminum, spring-assisted - Side underrun protection, aluminum, according to ECE regulations - KNORR BREMSE pneumatic system ILVL - Tyre pressure monitoring system (TPMS) - Air tanks made of aluminum - Lighting 24V ASPÖCK FULL LED ECOLED II - 2 reversing lights - 2 wheel chocks - Mud flaps on rear fenders - Load pressure gauge - Side-mounted broom and shovel holder, including broom and shovel - Rear skirt Reisch trailer splash guard - Access ladder (3 m), mounted laterally on the chassis - Toolbox - Water tank integrated into the body - Body floor: 7 mm - Side walls: 2.1 mm - Interior LED work lights in the body (side-mounted, switch operated) Ppedpfx Asylfcyohyjr - Split external combination doors with 2x grain chutes (also available with pendulum tailgate) - 2x grain chutes incl. sack spout - Including additional manual tension latches - 4-point locking mechanism (mechanical) - Double pendulum bearing - HYVA high-pressure 250 bar front tipping cylinder - Hydraulic connection hose on the semi-trailer - Pressure connection: Hyva 1? coupling - Steel standing platform with access on FRONT LEFT/RIGHT - 3x adjustable cross beams incl. lashing straps - 3x longitudinal tarp tubes integrated into the tarpaulin - PVC roll tarp in 900 g/m² quality - Tarpaulin color: black - 1x work light in the body, operable from outside - HYFIX hold-down device under the body

Condition: new, functionality: fully functional, machine/vehicle number: NEW-17, empty load weight: 780 kg, maximum load weight: 2,720 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,060 mm, loading space width: 1,840 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS MG 406 184 3500 2 Machine Transporter NEW VEHICLE Internal dimensions: 406 cm x 184 cm Side wall height: 30 cm Loading platform height: 40 cm Gross vehicle weight: 3500 kg Payload: 2717 kg Braked tandem trailer Overrun and handbrake system by AL-KO Maximum size axle and brake Low chassis Fully welded, hot-dip galvanized steel frame Fully supported floor 30 cm steel side walls 15 mm thick, slip-resistant and heavy-duty phenolic plywood floor Automatic jockey wheel with 400 kg load capacity 12 lashing rings with 1000 kg tensile strength, also on the front panel Reinforced 13'' commercial tires with steel valve M+S tires Net/rope hooks on the frame 13-pin connector Front marker lights Rear lamps with reverse light, fog light, and triangular reflectors Steel loading ramps with eccentric fastener, 2800 kg Adjustable rear supports Walk-on steel mudguards OPTIONAL ACCESSORIES PERMANENTLY DISCOUNTED FROM FEBRUARY 2026 - 100 km/h equipment (shock absorbers) - Spare wheel with holder - Superstructure and mudguards painted in color of your choice - Black Edition: superstructure and mudguards painted black - Complete LED lighting - Anti-theft device - Fine or coarse-meshed net - H-frame - Force One checker plate floor and 4x checker plate steps - Grid between ramps - Shovel holder - Height-adjustable drawbar with DIN towing eye - Removable rear side panel Further accessories available on request! Plus freight to Gera and vehicle registration document: €250 net Images are for illustration purposes and may show optional equipment at extra cost. Haven’t found the right trailer? We have 50–100 vehicles permanently in stock for immediate pickup. Our workshop is open on weekdays from 8:00 am to 5:00 pm for all types of repairs. Axle repair specialist, also for travel trailers. Additionally, we offer a wide range of spare parts and accessories, including for trailers from other manufacturers. We also offer a large selection of rental trailers. Podpork Iz Ssfx Ahyjpr Visit us online or stop by in person.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-17, empty load weight: 635 kg, maximum load weight: 2,835 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,680 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS MG 306 170 3500 2 Machine Transport Trailer NEW VEHICLE Internal dimensions: 306cm x 170cm Side panel height: 30cm Loading platform height: 40cm Gross vehicle weight: 3500kg Payload: 2825kg Braked tandem axle trailer Overrun brake and handbrake from AL-KO Maximum possible axle and brake size Low chassis Fully welded, hot-dip galvanized steel frame Fully supported floor 30cm steel side walls 15mm thick, anti-slip, heavy-duty phenolic plywood floor Automatic jockey wheel with 400kg support load 12 lashing rings with 1000kg tensile strength, also at the front panel Reinforced 13" C-rated tyres with steel valves M+S tires Net/rope hooks on the frame 13-pin plug Front position lights Rear lights with reversing light, rear fog lamp, and triangular reflectors Steel ramps with eccentric lock, 2800kg capacity Adjustable rear supports Walkable steel mudguards OPTIONAL ACCESSORIES PERMANENTLY DISCOUNTED FROM FEBRUARY 2026 - Equipment for 100 km/h (shock absorbers) - Spare wheel with holder - Structure and mudguards painted to customer specification - Black Edition: structure and mudguards painted black - Full LED lighting - Anti-theft device - Fine or coarse mesh net - H-frame - Force One checker plate floor and 4x checker plate steps - Mesh between ramps - Shovel holder - Height-adjustable drawbar with DIN towing eye - Removable rear wall Additional accessories available on request! Plus delivery to Gera and vehicle registration document €250 net Images are for illustration purposes and may show optional equipment at extra cost. Haven't found the right trailer yet? We have 50-100 vehicles in stock and ready for immediate collection at all times. Our workshop is open on weekdays from 8:00 to 17:00 for all types of repairs. Axle repair specialist, including for caravan trailers. Pedpfoghpb Dsx Ahyepr In addition, we offer a large selection of spare parts and accessories — also for trailers from various manufacturers. You will also find a wide range of rental trailers with us. Visit us online or come by in person!

Condition: new, Year of construction: 2026, We present our latest model of disc chipper, WOODGRAIN BX52RS, designed for effective shredding of branches, tree trunks with a diameter of up to 12 cm, as well as offshoots up to 25 cm. It is not just a chipper - it is an advanced tool that integrates modern solutions for even better efficiency and safety, in accordance with the latest EU directives. EQUIPPED WITH A SAFETY SWITCH that allows immediate disconnection of the power supply, and consequently prevents or minimizes the risk!!! BE CAREFUL ABOUT COUNTERFEITS, DANGEROUS DEVICES WITHOUT A SAFETY SWITCH ARE NOT ALLOWED FOR SALE UNDER POLISH LAW!!! The distinctive features of this model are the hydraulic material feeding system, which makes work even more effective. The new generation of the hydraulic system, with its own pump and oil tank, ensures not only safety but also efficiency. Additionally, the chipper has been equipped with its own hydraulic pump and hydraulic oil tank, powering two rollers feeding material to the knife disc. The drive from the tractor to the chipper is transferred by means of a transmission shaft, and the material collection mechanism is characterized by a smooth 10-step collection speed regulator, a material withdrawal function and an emergency stop. Work safety has been raised to a higher level thanks to safeguards and covers. The massive cutting disc with a diameter of 63 cm and a thickness of 2 cm is another advantage of the chipper. Considering the weight of the disc, which is 65 kg, the chipper does not burden the engine to a large extent, which distinguishes it from drum or roller chippers. The disc is equipped with 4 double-sided sharpened knives and one counter knife mounted in the chipper base. Additionally, the breakers (shovels) that crush the obtained chips to a value of 20-50 mm make the shredding process even more effective. The chipper also has a disc locking latch, facilitating the replacement of knives, and the produced chips are thrown out through a pipe rotated 360 ° in relation to the chipper base. Additionally, as part of our promotion, we are including a FREE PTO shaft. This is an ideal tool for professionals who value not only efficiency, but also innovative solutions and safety. Technical parameters Size of shredded material 12cm diameter (maximum 25cm with offshoots) Drive system Drive from the tractor engine transmitted through the PTO Minimum power 30 HP Rotor size 63 cm Number of cutting knives 4 + 1 counter blade Knife type hardened tool steel CR12 Rotor weight 58kg Material Feed Mechanism Own hydraulic pump driving two shafts Fastening system three-point suspension system (TUZ) Dimensions 195 cm L x 135 cm W x 190 cm H Feed hopper 82x60cm Ppjdpsvxtd Uofx Ahysr Ejection tube rotation range 360° Ejection tube height 190 cm Rated RPM/Rated RPM 540-1000 per minute Wood chipper weight 480kg Manufacturer: Cormak

Condition: new, empty load weight: 570 kg, maximum load weight: 2,130 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,000 mm, loading space width: 1,500 mm, loading space height: 340 mm, loading space volume: 1.4 m³, color: silver, construction height: 1,670 mm, working width: 2,100 mm, Automatic reverse drive, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle with 2 years TÜV from first registration - Availability: IMMEDIATELY - TÜV: 2 years - Floor: Multiplex screen printing with anti-slip surface - Gross vehicle weight: 2,700 kg - Unladen weight: 570 kg - Payload: 2.130 kg - internal dimensions: 300 x 150 x 34 cm (L x W x H) - loading sill height: approx. 35 cm - tires: 195/50R13C steel rim - brakes: yes - support wheel: yes, automatic - incl. vehicle documents (letter) Equipment: - continuous steel mudguards can be walked on - very stable welded steel frame - waterproof glued 18mm thick screen-printed floor - loading area height only approx. 35cm - maintenance-free rubber spring axles from KNOTT - KNOTT overrun device and parking brake - automatic reverse - very low chassis for low drive-on angle - V-drawbar with support for the excavator shovel - spare wheel storage under the excavator shovel storage (without e-wheel) - sturdy steel side walls approx. 28cm high - galvanized chassis - solid loading ramp, approx. 132cm long, with gas spring support - stable rear support integrated in the loading ramp (automatic support when the ramp is open) - 8x lashing eyelets on the side - lighting recessed in the rear frame - front marker lights - support wheel with holder in the middle - 13-pin plug - reversing light - integrated rear fog light - incl. transfer costs - incl. vehicle papers/COC papers We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We have been Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Specialist dealer & repair workshop for over 30 years - Delivery throughout Germany possible with surcharge! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Pedeu Hrhxopfx Ahyepr

Condition: new, empty load weight: 840 kg, maximum load weight: 2,660 kg, overall weight: 3,500 kg, axle configuration: 3 axles, loading space length: 4,000 mm, loading space width: 1,800 mm, loading space height: 340 mm, loading space volume: 2.2 m³, color: silver, construction height: 1,670 mm, working width: 2,400 mm, Automatic reverse drive, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle with 2 years TÜV from first registration - Availability:* IMMEDIATELY AVAILABLE * - TÜV: 2 years - Floor: Multiplex screen printing with anti-slip surface - Gross vehicle weight: 3,500 kg - Unladen weight: 840 kg - Payload: 2.660 kg - internal dimensions: 400 x 180 x 34 cm (L x W x H) - loading sill height: 35 cm - tires: 195/50R13C steel rim - brakes: yes - support wheel: yes, automatic - incl. vehicle documents (letter) Equipment: - continuous steel mudguards can be walked on - very stable welded steel frame - waterproof glued 18mm thick screen-printed floor - loading area height only approx. 35cm - maintenance-free rubber spring axles from KNOTT - KNOTT overrun device and parking brake - automatic reverse - very low chassis for low drive-on angle - V-drawbar with support for the excavator shovel - spare wheel storage under the excavator shovel storage (without e-wheel) - sturdy steel side walls approx. 34cm high - galvanized chassis - solid loading ramp, approx. 132cm long, with gas spring support - stable rear support integrated in the loading ramp (automatic support when the ramp is open) - 10x lashing eyelets on the side - lighting recessed in the rear frame - front marker lights - support wheel with holder in the middle - 13-pin plug - reversing light - integrated rear fog light - incl. transfer costs - incl. vehicle papers/COC papers We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We have been Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Specialist dealer & repair workshop for over 30 years - Delivery throughout Germany possible with surcharge! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Ppedpfeu Hrk Hsx Ahyor

Condition: new, empty load weight: 660 kg, maximum load weight: 2,840 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,000 mm, loading space width: 1,500 mm, loading space height: 340 mm, loading space volume: 1.4 m³, color: silver, construction height: 1,670 mm, working width: 2,100 mm, Automatic reverse drive, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle with 2 years TÜV from first registration - Availability: IMMEDIATELY - TÜV: 2 years - Floor: Multiplex screen printing with anti-slip surface - Gross vehicle weight: 3,500 kg - Unladen weight: 660 kg - Payload: 2.840 kg - internal dimensions: 300 x 150 x 34 cm (L x W x H) - loading sill height: approx. 35 cm - tires: 195/50R13C steel rim - brakes: yes - support wheel: yes, automatic - incl. vehicle documents (letter) Equipment: - continuous steel mudguards can be walked on - very stable welded steel frame - waterproof glued 18mm thick screen-printed floor - loading area height only approx. 35cm - maintenance-free rubber spring axles from KNOTT - KNOTT overrun device and parking brake - automatic reverse - very low chassis for low drive-on angle - V-drawbar with support for the excavator shovel - spare wheel storage under the excavator shovel storage (without e-wheel) - sturdy steel side walls approx. 28cm high - galvanized chassis - solid loading ramp, approx. 132cm long, with gas spring support - stable rear support integrated in the loading ramp (automatic support when the ramp is open) - 8x lashing eyelets on the side - lighting recessed in the rear frame - front marker lights - support wheel with holder in the middle - 13-pin plug - reversing light - integrated rear fog light - incl. transfer costs - incl. vehicle papers/COC papers We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We have been Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Specialist dealer & repair workshop for over 30 years - Delivery throughout Germany possible with surcharge! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Ppsdeu Hrh Eopfx Ahyor

Condition: new, empty load weight: 785 kg, maximum load weight: 2,715 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 1,800 mm, loading space height: 300 mm, loading space volume: 2.2 m³, color: silver, construction height: 1,680 mm, working width: 2,340 mm, Rear ramp / parabolic suspension / sloping rear / spare wheel / shovel storage, automatic reversing, drive-on ramp, hot-dip galvanizing, *INSTANTLY AVAILABLE incl. rear ramp / parabolic suspension / sloping rear / spare wheel / shovel storage Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY !!! - Gross vehicle weight: 3,500 kg - Unladen weight: 785 kg - Payload: 2,715 kg - Interior dimensions: 400 x 180 x 30 cm (L x W x H) - Overall exterior dimensions: 600 x 234 x 168 cm (L x W x H) - Loading sill height: 30 cm - Tires: 195/60R12C - Brakes: yes - Support wheel: yes, automatic - 100 km/h: optional - Incl. vehicle documents Vehicle documents Vehicle superstructure: - Floor: 18mm screen printing plate - Drop sides: solid steel drop sides - Drop side height: 30cm - Chassis: KNOTT parabolic suspension - Tipping function: no - Hydraulics: - - Drive-on angle: approx. 12 - Overrun device & brake: KNOTT - Frame/chassis: welded hot-dip galvanized steel frame - Attachment: no - Lashing eyes: 10 outside and 8 inside - Supports: integrated in ramps - Ramps: ramp upright on shaft - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Lockable coupling head - Bucket storage - Spare wheel - Welded side wall/frame construction made of sheet steel, hot-dip galvanized - Very stable bolted V-drawbar REINFORCED - Side walls 30cm high - Hot-dip galvanized steel ramps, upright - Very stable welded steel frame - Solid walk-on steel mudguards - Frame cpl. Parabolic spring axles (leaf spring suspension) - Beavertrail rear / low drive-on for working platforms and excavators - Many stable cross beams for high point loading - Lashing rings mounted in the outer frame 10 pieces (5 pairs), tensile force 1000 kg per lashing ring - Lashing eyes mounted on the inside 8 pieces (4 pairs) - Automatic reverse drive - KNOTT overrun device and parking brake - Sturdy locks for ramp - 13-pin plug - Reversing lights - Large reversing lights plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in rear frame - rear side position lights - automatic center support wheel - registration papers: COC papers Accessories can be retrofitted - please enquire: - 100km/h approval - storage box - net hooks - additional lashing eyes - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Pedpfx Aeu Ht Ndshyspr

Condition: new, empty load weight: 800 kg, maximum load weight: 2,700 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 1,800 mm, loading space height: 340 mm, loading space volume: 2.2 m³, color: silver, construction height: 1,670 mm, working width: 2,400 mm, Automatic reverse drive, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle with 2 years TÜV from first registration - Availability: IMMEDIATELY - TÜV: 2 years - Floor: Multiplex screen printing with anti-slip surface - Gross vehicle weight: 3,500 kg - Unladen weight: 800 kg - Payload: 2.700 kg - internal dimensions: 400 x 180 x 34 cm (L x W x H) - loading sill height: approx. 35 cm - tires: 195/50R13C steel rim - brakes: yes - support wheel: yes, automatic - incl. vehicle documents (letter) Equipment: - continuous steel mudguards can be walked on - very stable welded steel frame - waterproof glued 18mm thick screen-printed floor - loading area height only approx. 35cm - maintenance-free rubber spring axles from KNOTT - KNOTT overrun device and parking brake - automatic reverse - very low chassis for low drive-on angle - V-drawbar with support for the excavator shovel - spare wheel storage under the excavator shovel storage (without e-wheel) - sturdy steel side walls approx. 28cm high - galvanized chassis - solid loading ramp, approx. 132cm long, with gas spring support - stable rear support integrated in the loading ramp (automatic support when the ramp is open) - 10x lashing eyelets on the side - lighting recessed in the rear frame - front marker lights - support wheel with holder in the middle - 13-pin plug - reversing light - integrated rear fog light - incl. transfer costs - incl. vehicle papers/COC papers We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We have been Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Specialist dealer & repair workshop for over 30 years - Delivery throughout Germany possible with surcharge! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Ppjdsu Hrh Sopfx Ahyer

Condition: used, Bucket with tipping function for forklift, BAUER type BSM 90 Bulk material bucket, forklift bucket, tipping bucket, snow bucket, chip container, bulk container, tipping container Manufacturer no.: 4421 Year of manufacture: 1983 Load capacity: 1,500 kg Volume: 0.9 m³ Bucket width: 1570 mm Bucket depth: 1200 mm Bucket height: 550 mm Entry pockets: 120 x 70 mm Fork spacing inside/outside: 500/740 mm - Mechanical tipping device - Forklift entry pockets with access openings for forks into the loading area - Orange painted with minor rust spots Dead weight: 275 kg Required space (W x D x H): 1570 x 1500 x 800 mm Good condition Dead weight: 275 kg Ppodpfx Aou Swbuehyjr

Condition: like new (used), mileage: 195,000 km, fuel type: hybrid, Year of construction: 2019, IVECO DAILY 35-14 NP PETROL/METHANE YEAR 2019 FARID COMPACTOR WITH REAR LIFTER AND INTERNAL SHOVEL 195,000 KM TYRED SINGLE OWNER FINANCING AVAILABLE BENITO 3383844139 Ppsdpfxewxawyo Ahyor MICHELE 3394588233

Condition: used, functionality: fully functional, Year of construction: 2023, load capacity: 800 kg, empty load weight: 200 kg, construction width: 1,800 mm, Bulk material bucket Technical condition: New Description: Transport of material with a density &#8804 2100 kg/m3 Perfect for transporting grain, soil, gravel... Reinforced construction for maximum load capacity Leveling aid for greater precision Optional bolted LDR shoe rail available on certain models Ppodpfx Ahsu Dyd Njyer

Condition: used, functionality: fully functional, Year of construction: 2020, overall weight: 330 kg, total height: 790 mm, total length: 1,000 mm, total width: 1,850 mm, load capacity: 735 kg, shovel Producing company Manitou Type CBR 730 L1850 Year built 2020 Height (mm) 790 Length (mm) 1,000 Podpfx Ahjycxtgeyopr Lifting weight (kg) 735 Weight (kg) 330 Width (mm) 1,850

Condition: new, functionality: fully functional, Year of construction: 2023, overall weight: 340 kg, total height: 800 mm, total length: 860 mm, total width: 1,950 mm, load capacity: 843 kg, shovel Producing company Manitou Type CBR 780 L1950 Pjdpfoycxtajx Ahyjpr Year built 2023 Height (mm) 800 Length (mm) 860 Lifting weight (kg) 843 Weight (kg) 340 Width (mm) 1,950

Condition: new, functionality: fully functional, Year of construction: 2024, overall weight: 330 kg, total height: 790 mm, total length: 880 mm, total width: 1,860 mm, load capacity: 735 kg, shovel Pjdpfsycxr Nox Ahyjpr Producing company Manitou Type CBR730L1850 Year built 2024 Height (mm) 790 Length (mm) 880 Lifting weight (kg) 735 Weight (kg) 330 Width (mm) 1,860

Condition: new, functionality: fully functional, Year of construction: 2023, overall weight: 340 kg, total height: 780 mm, total length: 900 mm, total width: 1,950 mm, load capacity: 843 kg, shovel Producing company Manitou Pjdpfx Aeycxr Aohyepr Type CBR 780 L1950 Year built 2023 Height (mm) 780 Length (mm) 900 Lifting weight (kg) 843 Weight (kg) 340 Width (mm) 1,950

Condition: used, axle configuration: 3 axles, first registration: 09/2021, loading space length: 9,700 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 53 m³, Chassis, Light Version Aluminium (15-6-12) Two fully-automatically welded I-beam longitudinal members with welded cross members. Chassis width: 1,600 mm. Axles and Suspension: SAF-Intradisc light axle assemblies, 'off-road version', with 3 x 9 t disc brake axles (430 mm), SAF air suspension, centrally arranged to the chassis longitudinal members. 1st axle with liftable air bellows, starting aid and manual forced lowering. Smart Board Info Center, Hebert lowering valve, front load pressure gauge. Tyres and Wheels on Alloy Rims 6 wheels with tyres size 385/65 R 22.5 approx. 50% tread, 11.75 x 22.5 ET 120, UNI wheel bolts for alloy rims. Kingpin 2" screwed into an 8 mm thick 'light' plate. Landing Gear Support winches, load capacity 2 x 20 t, with swivel foot for air suspension. Braking System In accordance with E.G. standards, twin-line Wabco system, spring-actuated parking brake operating on two axles, with Wabco EBS-E including RSS (Roll Stability System), Wabco Smartboard Info Center, aluminium air reservoir system. Electrical System In compliance with StVZO guidelines, 3 round three-chamber lamps (Aspöck type), 24-volt system with 2x 7-pin and 1x 5-pin socket, 2x 7 side marker lamps, 2 central rear LED reverse lights, 1 round fog lamp, 4 LED work lights, 1 interior LED lamp, 4 red LED position lights in the door header. All air and electrical lines are neatly laid in plastic conduits. Tipper Body / Tipping Skip "Smooth Construction" Internal structure fully welded. Aluminium skip, side walls made from 30 mm thick plank profiles (2-3 mm), 600 mm wide and welded, floor plate 8 mm thick highly wear-resistant alloy (5383H34/HB 110) with 90-degree profile to side walls, front wall 4 mm reinforced in straight design, rear wall as universal door in straight design with 2 wing doors (1/2–1/2 configuration) and grain slide. Universal door operated automatically-pneumatically, separately lockable lever, rear frame in swing-out ALU design, two hold-downs with rubber buffers on the tipper skip fixed to the chassis at the front wall. Hydraulic System Tipping Cylinder with "Sheath" Suspension Ppodpfx Ahsyiw T Eeysr Hydraulic cylinder mounted on the front wall, operating pressure 150 bar, manufacturer Edbro, approx. 2.5 m hydraulic hose and loose end 1", tipping angle approx. 48 degrees. Accessories 6 Parlok mudguards, complete spray flaps across full vehicle width fixed to underrun protection, no spare wheel holder ALU, side underrun protection right side foldable, large tool box type 860, approx. 3 m aluminium ladder, 3 aluminium swing hoops in the centre approx. 150 mm elevated, additional central hoop support, roll tarp with central light strip and separate reinforcements in high wear areas, approx. 660 g/m² quality, tarp rolling system with quick tension closure, continuous rubber rope at rear edge with two tension hooks to be fastened to rear swing hoop, walkway on the chassis, rear tarp closure welded with rubber rope to prevent water ingress, robust folding underrun protection, 2 "Clear-Pass" spray flaps on mudguard (EG-compliant), aluminium grain funnel with sack fitted laterally to frame, holder for shovel, broom and scraper mounted above the axles, etc. Unladen weight: 5,950 kg Offer and images non-binding