Used Segmented Disc Polishing Machine for sale (71,683)

Condition: as good as new (ex-display), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1831-0031, Ultrasonic polishing system with up to 100W output power. Complete with 1 handpiece for rough and fine finishing operations. Guedpfx Agett Dz Ie Rjc Cable (1.7 m length) Supplied with a comprehensive range of accessories (M6 holder for flat 1mm, M6 holder for round 3mm + various diamond and ceramic files).

Condition: good (used), Year of construction: 2001, The system can also grind miters. Gujdjiqghzopfx Ag Rjc Connection value: 20.5kW Total length: 12500mm

Condition: used, Polish Lathe / Polishing Machine Between points: 1500 mm Centre height: 180 mm Maxi diameter to polish: Ø 380 mm Spindle CM3 Spindle speed driven by speed variator Pneumatic tailstock Equipped with a vaccum system (only air hose to plug in) Gjdpfxoxuf Hvs Ag Rsuc Machine was used to polish axes Voltage: 220 V mono Dimensions (L x W x H): 3200 x 1000 x 1900 mm Weight: 1,2 T

Condition: ready for operation (used), functionality: limited functionality, disc diameter: 525 mm, Weight approx. 1,900 kg Dimensions (LxWxH) approx. 1,800x1,500x2,200 mm Working disc diameter 525 mm Largest disc ring width 175 mm Largest workpiece dimension 170 mm Speed of the working disc 45/70/90/140 rpm Main drive performance 4.0 kW Connection 400V/50Hz Guodpfjh Invrjx Ag Rec Emergency stop switch Conventional control with control panel Full-fledged lapping machine, conventional control

Condition: good (used), EMME ELLE POLISHING LINE MODEL TYPE: L.B.A.1350 OCCASION WORKING TABLE OF 1.350 X 3.200 MM. 4 OSCILLATING ROLLERS OF 350 MM DIAMETER + 4 BUFFING PADS OF 180 MM DIAMETER. AUTOMATIC WAX SPRAYING SYSTEM BY MEANS OF HIGH PRESSURE PNEUMATIC GUNS, WORKTABLE DEPRESSOR UNIT WITH 5,5 KW MOTOR, CE REGULATION. Gusdehkndmopfx Ag Rjc

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 022607, Pipe washer La Chatre mod. 50 Year 2002 In working condition CE marking Gjdpfx Aoxmgy Ijg Reuc

Condition: used, functionality: fully functional, Year of construction: 2009, The ASKE machine features a 9-piece rail set for the upper beam, lower beam, and bending beam for cassette production. With the patented eccentric quick-clamp system, tool changes on the upper and bending beams require only a single hand motion. The multi-stage drive of the upper beam allows for the additional use of sharp- and radius rails. Guedoxzuv Tjpfx Ag Rsc

Condition: refurbished (used), 1 overhauled HAU table polishing machine, model T1500 (maximum part processing length 1500 mm), with 1 PES/3 polishing station and a control cabinet. The table was disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The guide shafts were re-bearinged, and a new gearbox was installed. + 1 PES/3 polishing station, 11 kW Gedpfxew Au A Ej Ag Reuc (pneumatic lifting, 100 mm oscillation AND motorized height adjustment). Max. wheel width 400 mm, max. wheel diameter 400 mm The station was completely disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The polishing shaft was completely re-bearinged, including the liner bearings. The oscillation device was also completely re-sealed. New motor, pulleys, and drive belt were installed. + 1 new control cabinet for controlling the above-described system. Table speed and polishing wheel speed adjustable via frequency converter.

Condition: used, TECHNICAL DETAILS Gusdpfeug U Ewjx Ag Rjc - number of stations : 6 (4 polishing, 1 grinding wheel, 1 cleaning) - driving plate diameter : 200 [mm] - dimensions : 1200 x 900 x 1800 [mm] - weight : 420 [kg]

Year of construction: 2019, condition: refurbished (used), General overhauled fully automatic indexing rotary polishing table with 6 work spindles and 4 polishing stations, each with 5.5 KW inverter drive power, all polishing stations with two-axis motorized wheel feed and lift, new control cabinet with Siemens PLC control, HMI and LED control panel, CE conformity possible, HMI in English possible Gjdpfx Agjipqwls Reuc

Year of construction: 2025, condition: as good as new (ex-display), With 250 mm diameter of grinding wheel - new equipment / demo unit for special price Godpfx Agoptc Do Reuc - this machine is a standard machine for manual preparation - optional we offer a specimen mover – please ask for details Machine ready for use: - basic machine disc diameter 250 mm - 250 mm platic grinding table - splash guard - disc cover - connections for cooling water & water drain Optinonal: grinding paper, diamond grinding discs, polishing cloth, diamont suspensions inclusiv delivery by forwarder (Germany) delivery outside Germany on request offer not binding - subject to prior sale

Condition: refurbished (used), 1 overhauled HAU table polishing machine, model T1000 (maximum part processing length 1000 mm, respectively), with 1 PES/3 polishing station and a control cabinet. The table was disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The guide shafts were re-bearinged, and a new gearbox was installed. + 1 PES/3 polishing station, 11 kW (pneumatic lifting, 100 mm oscillation AND motorized height adjustment). Max. wheel width 400 mm, max. wheel diameter 400 mm The station was completely disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The polishing shaft was completely re-bearinged, including the liner bearings. The oscillation device was also completely re-sealed. New motor, pulleys, and drive belt were installed. + Gedpjw Avptofx Ag Reuc 1 new control cabinet for controlling the above-described system. Table speed and polishing wheel speed adjustable via frequency converter.

Condition: used, TECHNICAL DETAILS - Palletizer in the loader frame - Liquid paste gun POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 14 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3400 x 1680 [mm] - Machine height : 2200 [mm] - Machine weight : 6000 [kg] EQUIPMENT Gujdpfxjv Rgw So Ag Roc - CNC : Siemens - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Air extractor : WESCO EcoCell

Condition: good (used), Year of construction: 2001, total width: 700 mm, total length: 1,050 mm, total height: 1,400 mm, disc diameter: 250 mm, overall weight: 100 kg, Double brush polishing machine, with 2 exhauster stands, Motor 2-speed, 1,3 / 1,7 KW, speed 1400/2800 rpm., Dia brushes 250 x 25 x 60 mm, dimension 1050x700x1400 mm, weight 100 kg Gusdpfswhzh Eex Ag Rjc

Condition: good (used), Year of construction: 2007, working width: 800 mm, Polishing machine Manufacturer: Gottschild Model: HBS Year of manufacture: 2007 Guedpfx Agjxzqrqj Roc High-gloss polishing machine, previously used for polishing kitchen fronts and bathroom furniture parts Working width: 800 mm 1 polishing head, moves automatically right – left Polishing motor: 0.7 / 0.9 kW Working area is detected by sensors Conveyor belt width 820 x length 1950 mm Conveyor belt moves forward and backward One roller conveyor each in front of and behind the transport system, B 820 mm x L 1500 mm Connected load 2.2 kW / 400 V / 50 Hz Compressed air connection 6 bar

Condition: excellent (used), Year of construction: 2016, working width: 400 mm, Compact oil spreader / polishing machine Manufacturer: Sarmax Year of manufacture: 2016 Spreader and polishing machine for applying oil or stain to solid wood floorboards, parquet, etc. Working width approx. 400 mm 1x polishing pad unit, infinitely variable speed control 1x brush unit, infinitely variable speed control Height adjustment per unit, manual via handwheel Feed speed infinitely adjustable Connection: 380 V Dimensions: 1600 x 1100 x 1700 mm Weight approx. 400 kg Gujdpfx Agjxyvq Nj Rec

Condition: ready for operation (used), * Brand: SBM Austria * Model: screening machine with discharge conveyor * Screen surface: 3500 x 1300 mm - 1 deck. * Driving: 7,5 kW E-motor. Gsdpfx Agsywncbe Rouc * Incl.: steel support. * Discharge conveyor: A-A length = 11000 mm, Beltwidth: 800 mm. * Driving: 7,5 kW gearmotor.

Condition: new, Set of 2 MATS FOR CHIP REMOVAL AT THE OUTLET OF A BIESSE MACHINING CENTER: - 1 Flat mat, 600 x 2100 mm, Gsdpfjzc Rc Hex Ag Rjuc - 1 Inclined mat, 700 mm, with a retaining edge to contain chips up to a height of 1650 mm.

Condition: excellent (used), Year of construction: 2022, operating hours: 1,536 h, functionality: fully functional, OPS INGERSOLL GANTRY EAGLE 800 Year of manufacture: 2022 Excellent condition, low operating hours 1536 erosion hours 997 operating days Cleaned, measured, tested, and various wear parts replaced. EAGLE Powertec PC/NC control system 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec handheld multifunctional operating device Manual erosion with Powertec handheld EAGLE Powertec - Fine finishing generator PT 60, 60 Amperes Gusdpfx Agjy Ti Hto Rsc (60 Amperes peak current) High Speed Jump max. 18,000 mm/min Travel ranges (X, Y, Z) 550 x 850 x 450 mm Linear measuring system in all axes Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer, 20-position pick-up disc magazine Working tank (W x D x H) 800 x 1,100 x 480 mm Work table (W x D) 760 x 1,000 mm Load capacity 2,000 kg Overhang load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system Cooling unit

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: MB 0484 / 2014, type of input current: three-phase, continuous power (apparent): 10 kVA, type of cooling: air, total width: 1,119 mm, total length: 2,595 mm, total height: 2,510 mm, overall weight: 1,700 kg, For sale is a capacitor discharge welding system (CD welding system) from the brand GLAMATRONIC, model GKS-S4/12-Q, manufactured in 2015. The system is in good condition and is suitable for industrial welding applications with high process reliability and precise energy output. The system has been regularly maintained and is immediately ready for operation. The control cabinets are equipped with additional air cooling. Technical data: Make / Type: GKS-S4/12-Q Gsdpfx Agey Rmk De Rouc Year of manufacture: 06/2015 Rated voltage: 3 x 400 V AC / 50 Hz Control voltages: 230 V AC / 24 V DC Rated power: 10 kVA Welding energy: 4 kJ Welding force: 12 kN Max. supply line fuse: 32 A Frame weight: approx. 1,700 kg Control cabinet weight: approx. 1,000 kg

Condition: used, Year of construction: 2015, functionality: limited functionality, machine/vehicle number: M1042, Technical characteristics: # Working chamber: 980 × 860 × 900 mm (W × H × D) # Working table height: 935 mm # Mechanical weight: 1900 Kg Electrical Equipment # Power supply: 400 VAC, 3-phase, 50 Hz # Installed capacity: 30 kVA # Generator output: 450 A / 43 V DC (pulse technology included) Dimensions # Machine Dimensions (L×W×H): 2100 × 2000 × 2600 mm; Equipment consists of: # Main machine, electrolyte filtration system, industrial cooler, electrolyte treatment (CR-6 elimination) Gusdexx Nkyspfx Ag Rsc Dosing unit for electrolyte stabilization # Control system: Siemens HMI – User-friendly interface: Touch panel with integrated tool menu # Communication module for tooling needs: up to 12 signals # Safety features: Light curtain or sliding door for operator protection # Process monitoring: Real-time data tracking and short-circuit detection Machine status: WORKING # Safety light barrier – needs replacement

Year of construction: 2014, condition: repair required (used), functionality: not functional, machine/vehicle number: M755, Technical characteristics: # Workspace: 1,130 × 860 × 1,080 mm (W × H × D) # Tank capacity: 420L # Mechanical weight: 1,900 Kg Electrical Equipment # Power supply: 400 VAC, 3-phase, 50 Hz # Generator output: From 3 kW up to >100 kW (with pulse technology) Dimensions # Machine dimensions (L×W×H): 2,100 × 2,000 × 2,600 mm Gujdpfxsxwmiks Ag Roc Equipment consists of: # Main machine, electrolyte filtration system, industrial cooler, electrolyte treatment (CR-6 elimination) # Dosing unit for electrolyte # Control system: Siemens S7-300 with Visual WIN CC/User-friendly interface: Touch panel with integrated tool menu # Communication module for tooling requirements: up to 8 signals # Safety features: Light curtain or sliding door for operator protection # Process monitoring: Real-time data tracking and short-circuit detection Machine status: NOT WORKING # Safety Light barrier # Communication module Festo # Pump for filtration system

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, OPS INGERSOLL GANTRY EAGLE 800 Year of manufacture: 2022 Excellent condition, low hours EAGLE Powertec PC/NC Control 3060 22" touchscreen display MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld multifunctional remote control Manual EDM operations with Powertec Handheld Gjdpfxeyzxd De Ag Rjuc EAGLE Powertec - Fine finishing generator PT 60, 60 amps (60 amps peak current) High Speed Jump: max. 18,000 mm / min. Travel (X, Y, Z): 550 x 850 x 450 mm Linear measuring system on all axes Distance table / electrode chuck: min. 135 mm / max. 585 mm 20-position electrode changer with pick-up rotary magazine Work tank (W x D x H): 800 x 1,100 x 480 mm Worktable (W x D): 760 x 1,000 mm Load capacity: 2,000 kg Headload: 200 kg Machine dimensions (W x D x H): 1,436 x 2,940 x 2,730 mm Integrated cartridge filtration system Accessories: Erowa, type UPC Production Chuck CO2 fire extinguishing system Recooling unit

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 650 mm, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 1,770 mm, workpiece width (max.): 1,270 mm, workpiece height (max.): 680 mm, feed rate Z-axis: 12 m/min, table load: 7,500 kg, Status: completely overhauled Control: Mitsubishi - 64 bit CNC Generator power: 70 amps - multipulse Gujdpfoyx Dn Nox Ag Rec Travel paths (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 30-way pick-up plate changer Work container (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Accessories: - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump)

Condition: refurbished (used), Year of construction: 2013, travel distance X-axis: 550 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 2,000 kg, table width: 760 mm, distance table to quill: 585 mm, table length: 1,000 mm, workpiece length (max.): 1,095 mm, workpiece width (max.): 795 mm, workpiece height (max.): 480 mm, overall weight: 6,800 kg, year of last overhaul: 2025, table load: 2,000 kg, rapid traverse Z-axis: 18 m/min, Equipment: documentation/manual, OPS INGERSOLL GANTRY EAGLE 800 Overhauled Year of construction 2013 EAGLE Powertec PC/NC control 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld multifunctional manual control unit Manual eroding with Powertec Handheld EAGLE Powertec - PT 60 fine finishing generator, 60 amps High Speed Jump max. 18,000 mm / min. Travel (X, Y, Z) 550 x 850 x 450 mm Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer 20-fold pick-up disk magazine Work bowl (W x D x H) 800 x 1,100 x 480 mm Work table (W x D) 760 x 1,000 mm Load capacity 2,000 kg Top load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system Electrode clamping system EROWA ITS , Hirschmann or System 3R (customer request) ECOTEC energy-saving function Standby mode for Gantry Eagle Multiprog Powertec technology programming on CD for external programming station Gedpoyrqprefx Ag Rsuc