Used Sectioning System for sale (41,634)

Condition: used, Year of construction: 2007, functionality: unexamined, machine/vehicle number: AYA320NY3006, overall weight: 950 kg, total length: 1,700 mm, total width: 1,650 mm, total height: 2,120 mm, input voltage: 400 V, input current: 28 A, input frequency: 50 Hz, Mazzali Intensys Lab Burn-in industrial (climate) oven, including manual Itedjwm Htqspfx Ah Esl Type: Intensys Lab 12+12HD Code: AYA320NY3006 Year of construction: 2007 Mains connection: 400V Temperature range: -40°C / +180°C (external cooling) Load capacity: 12 plates Oven Dimensions: 72 x 50 x 72cm Dimensions: 170 x 165 x 212 cm Weight: ~950 kg

Condition: used, first registration: 02/1990, Year of construction: 1990, SPIERINGS Lattice Mast Tower/Truck Crane Chassis: • Engine power: 222 kW / 305 HP / displacement 8,250 cm³ • Vehicle dimensions: 12,395 x 2,600 x 4,000 mm • Operating weight: 35,000 kg • Permissible gross weight: 36,000 kg incl. 7,080 kg counterweight • Tires: 445/65 R22.5 • 3 axles • 1st and 3rd axles are steered • Beacon lights Crane: • Max. outreach: 30.4 m • Max. lifting capacity: 5,000 kg at 9.3 m outreach • Drive system: hydraulic, hydro pumps electrically powered by external power source or generator operation • Control system: electrically operated proportional and control valves • Max. corner load: 204 kN • Max. speed: 85 km/h • Can only be moved from the carrier vehicle! Hoisting Gear: • Motor: hydraulic variable displacement motor • Drive group: 1Am • Displacement: 20..55 cm³ • Max. supply pressure: 260 bar • Transmission: planetary gear, i=27 • Drum diameter: 375 mm • Max. rope pull: 25 kN • Corresponding rope speed: 30 m/min • Holding brake: spring-loaded multi-disc brake Itjdpfowmpczox Ah Eel Trolley: • Motor: hydraulic fixed displacement motor • Drive group: 1Am • Displacement: 16 cm³ • Max. supply pressure: 265 bar • Transmission: planetary gear, i=10.4 • Drum diameter: 200 mm • Max. rope pull: 6 kN • Max. speed: 50 m/min • With limit switch • Holding brake: spring-loaded multi-disc brake Slew Gear: • Motor: hydraulic fixed displacement motor • Displacement: 16 cm³ • Max. supply pressure: 300 bar • Transmission: planetary gear, i=160 • Max. superstructure slewing speed: 1.3 rpm • Slewing brake: hydraulic brake valve • Holding brake: spring-loaded multi-disc brake Luffing Winch: • Drive group: 1Em • Motor: hydraulic fixed displacement motor • Displacement: 16 cm³ • Max. supply pressure: 220 bar • Transmission: planetary gear, i=92 • Drum diameter: 200 mm • Max. rope pull: 38 kN • Max. speed: 18 m/min • Holding brake: spring-loaded multi-disc brake • With limit switch Load / Load Moment Limiter: • Pressure switch on hoisting drive motor • Mechanical switch triggered by turret frame bending Tower: • Working height: 20.8 m • Outer tower: length 9.9 m; Inner tower: 11 m Jib: • Trolley jib in lattice construction; can be positioned either horizontally or at 30° incline • 1st jib section: length 11 m / 2nd section: 11.1 m / 3rd section: 7.8 m - German machine! - Ready for operation! Errors and prior sale excepted! = Further information = Main boom length: 30.4 m

Year of construction: 2020, operating hours: 10 h, condition: like new (used), functionality: fully functional, Automatic line for rinsing, filling, pasteurizing, drying and packaging of glass juice bottles consisting of following modules: 1. SEMI AUTOMATIC DEPALLETIZER (model: Depal 512 – mini) for unpacking glass bottles from pallets, 1 operator required to put the pallet into the machine and remove the cardboard that is inserted in between the glass bottle layers 2. UNIVERSAL RINSING MACHINE (model: IND-Wash 56 S2) for steam sanitizing and hot water rinsing of the bottles before filling Iodpfxozdr Ils Ah Estl 3. ROTARY FILLING MACHINE (model: IND-Dose 46 PO-12) for filling of the hot product into the glass cylinder shape bottles 4. CLOSING MACHINE FOR TWIST OFF CAPS (model: IND-Close 12E) for vacuum closing of the filled bottles using steam injection induced vacuum system 5. PASTEURIZATION AND COOLING TUNEL (model: PT 42-9) for further continuous pasteurization of the product 6. VACUUM TESTING MACHINE (model: IND-Test 61) for selection and eviction of the improperly closed bottles 7. DRYING MACHINE (model: IND-Blow 86) for drying the residual moisture on the battle surface before applying labels 8. LINEAR LABELLING MACHINE FOR APPLICATION OF SELF-ADHESIVE LABELS (model: IND-Lab 32B) with top (over the cap) and side application of the labels on cylindrical bottles 9. AUTOMATIC GROUPING AND SHRINK-WRAPPING MACHINE WITH TRAY AND FILM (model: IND-pack 29 T) for packing the bottles onto cardboard trays in various configurations per different bottle sizes 10. SET OF FLAT TOP CHAIN CONVEYORS (model: IND-Trans 71) connecting the various modules of the line (conveyors between rinsing, filling and closing sections with top covers)

Year of construction: 2018, condition: excellent (used), functionality: fully functional, Dust control/high-pressure misting system 2 misting cannons, each with 30 nozzles Itodpfxjz A Tclj Ah Esl Separate container with central unit, electrical system, IBC water tank, and high-pressure line.

Condition: good (used), Year of construction: 2019, Conveyor system, AMI, approx. 69m driven, plus 10m non-driven – used – : Ijdpfxsx Tttqo Ah Eetl Ex-site price: only €13,500 (net), dismantled, packed and loaded! Manufacturer: AMI Type: Roller Conveyor ARF50-130 Year of manufacture: 2019 Length Section 1: approx. 33m, driven Section 2: approx. 36m, driven Usable width: 450mm (roller width) Element width: 62.5mm 2 flap elements / passages Including control system Plus approx. 10m non-driven roller track Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Cooling system for recovering waste heat from machines Includes 6 heating fans. Itedpfxjzyc Die Ah Eel Details available upon request.

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 4,500 rpm, travel distance X-axis: 235 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 580 mm, spindle motor power: 18,500 W, total height: 2,085 mm, total width: 1,814 mm, overall weight: 4,200 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 828D, product length (max.): 2,790 mm, number of slots in tool magazine: 12, number of axes: 6, This 6-axis SMEC SL2000SY was manufactured in 2022. It features a maximum turning diameter of 395 mm and a maximum machining length of 450 mm. The machine is equipped with a Siemens SINUMERIK 828D control system and a tool turret capacity of 12 stations. If you are looking to get high-quality turning capabilities, consider the SMEC SL2000SY horizontal turning machine we have for sale. Contact us for further details. - Control: Siemens SINUMERIK 828D with OPERATE + PPU290 (Touchscreen)- Swing over bed: 650 mm- Swing over cross slide: 540 mm- Max. turning diameter: 395 mm- Max. machining length: 450 mm- Y-axis travel: 105 mm (±52.5 mm)- Main Spindle Chuck Diameter: 210 mm (8")- Main Spindle Nose Norm: A2-6- Main Spindle Bearing Inner Diameter: 110 mm- Main Spindle Max. Bar Capacity: 67 mm- Main Spindle Bore Diameter: 76 mm- Main Spindle Drive Power: 18.5 / 11 kW- Main Spindle Max. Torque: 209.5 Nm- Sub-Spindle Chuck Diameter: 152 mm (6")- Sub-Spindle Nose Norm: A2-5- Sub-Spindle Bearing Inner Diameter: 90 mm- Sub-Spindle Max. Bar Capacity: 36 mm- Sub-Spindle Bore Diameter: 45 mm- Sub-Spindle Drive Power: 9 / 5.5 kW- Sub-Spindle Max. Torque: 51.9 Nm- Sub-Spindle Max. Speed: 6,000 rpm- Tool Turret Capacity: 12 stations (24-position indexing)- Tool Holder Type: BMT55- Driven Tool Drive Power: 5.5 / 3.7 kW- Driven Tool Max. Speed: 5,000 rpm- Driven Tool Max. Torque: 35 Nm- Stationary Tool Cross Section: 25 x 25 mm- Boring Bar Holder Cross Section: Ø40 mm- Station-to-Station Index Time: 0.2 sec- Rapid Feed X-axis: 18 m/min- Rapid Feed Z-axis: 30 m/min- Rapid Feed B-axis: 24 m/min- Rapid Feed Y-axis: 12 m/min- Slant Bed Angle: 30 degrees- Coolant System Tank Capacity: 10 bar pressure, 2.2 kW pump- Hydraulic Tank Capacity: approx. 14 L (35 bar max pressure)- Voltage / Electrical Connection: 400 V, 50 kVA- Pneumatic Connection: 6 bar- Net Weight Chip Conveyor: approx. 1,000 kg- Net Weight Transformer: approx. 300 kg- Additional Included Equipment: WTO Tool Holder Package, SAMCHULLY 3-jaw power chucks (8" main, 6" sub), Chip conveyor (side discharge), Oil skimmer with endless belt, Automatic tool setter arm, Part catcher & ejector, Bar feeder interface Technical Specification Counter Spindle Yes Driven Tools Yes Isdpfjz A T Uuox Ah Estl

Year of construction: 2026, operating hours: 20 h, condition: like new (used), functionality: fully functional, PE30 Commercial Chocolate Enrobing & Cooling Line – 30kg Tank – 2.7m Cooling Tunnel – Almost New We are selling our complete PE30 chocolate enrobing and cooling line following the closure of our recently launched protein bar production facility in London. The equipment was purchased new specifically for our own production and only went into operation around March 2026. Since then, approximately 25,000 chocolate-coated protein bars have passed through the line, so it has had relatively light commercial use and remains in excellent condition. The equipment is being sold solely due to the closure of our production facility for business and financial reasons – not because of any fault with the machinery. Complete system includes: PE30 chocolate melting & enrobing machine 30kg chocolate melting/holding tank Chocolate enrobing section with stainless-steel mesh conveyor Custom-made acrylic enclosure/cover for improved temperature stability around the chocolate 2.7m refrigerated cooling tunnel Food-grade PU cooling conveyor Copeland compressor External ventilation/extraction fan Associated components supplied with the system The custom acrylic cover was purchased separately and designed specifically for our machine to help maintain a more controlled temperature around the chocolate during enrobing. It is included in the sale. PE30 specifications Manufacturer: Anhui Dixin Machinery Technology Co., Ltd. Model: PE30 Capacity: 30kg Power: 220V / 1 Phase / 50Hz, 1.8kW Material: SUS304 stainless steel Working speed: 2m/min Mesh: 200 × 1000mm Belt: 200 × 1200mm Dimensions: approx. 1230 × 850 × 1450mm 2.7m cooling tunnel SUS304 stainless steel Food-grade PU belt 200mm × 2700mm belt 220V / 1 Phase / 50Hz 2.8kW Copeland 2HP compressor Temperature capability down to approx. -15°C Dimensions: approx. 2800 × 850 × 1380mm Weight: approx. 220kg These technical specifications are taken from the original manufacturer's documentation. The system also includes a ventilation fan intended to be installed/vented outside the production area. Isdpfszx D Dbjx Ah Estl We used the line for premium chocolate-coated protein bars, but it can also be suitable for energy/nutrition bars, confectionery, biscuits, bakery products and other chocolate-coated products. The manufacturer also specifies the cooling tunnel for a range of food applications. The machine is currently located in Wimbledon, London, UK. Inspection can be arranged, and videos of the equipment operating can be provided to serious buyers. We are also selling other equipment from our protein bar production facility, including protein bar extrusion/forming machinery, chocolate processing equipment, flow-wrapping machines, mixers and stainless-steel production equipment. Machines can be purchased individually or as part of a complete protein/energy bar production line. Collection from Wimbledon, London. Buyer to arrange suitable transport and installation unless otherwise agreed.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, overall weight: 16,500 kg, total width: 2,185 mm, total length: 5,563 mm, total height: 2,195 mm, Specification: Maximum sheet size: 740 x 1060 mm Minimum sheet size: 330 x 400 mm Maximum cutting force: 300 tons Mechanical speed, up to 8,000 sheets/hour Materials processed: Paper and cardboard: 0.1 - 1.5 mm Corrugated cardboard up to B-flute Equipment: Iodezt Nbzopfx Ah Estl - Steel feeding plate - Lifting suction cups - Transport suction cups - Adjustment of brush and roller position on the delivery table, using a single knob - Touchscreen monitor mounted on the machine - Pneumatic stops at the front guides - Laser sensors on the front guides - Modification of sensors for transparent materials - Pneumatic closing of the frame and die plate - APC System – Automatic Pressure Control System APC1 - automatic control of cutting pressure, allowing for maintaining the same pressure during the die-cutting/punching process. Possibility to set tonnage tolerance and control the sheet count after a certain number of pieces. - Programmable safety clutch for exceeding cutting force - pneumatic - Stabilizing air blast in the cutting section, increasing precision and cutting speed for thin papers - Quick-change tool system in the stripping section – Punching Metal (upper and lower stripping fingers) - Europing Centering System – die-cutting and stripping zone - Automatic non-stop stacking system, with a curtain and programmable number of sheets per stack - Upper curtain air blast in the stacking zone - Slip sheet inserter with batch counter, located in the stacking zone - Spare gripper carriage – 1 unit - Power transformer Delivery time: immediately after acceptance of the commercial terms and payment of the financial amount. This announcement has been automatically translated. Translation errors are possible.

Condition: good (used), Year of construction: 2023, functionality: fully functional, operating hours: 59,000 h, input voltage: 400 V, input frequency: 60 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 5 mm, actuation type: electric, total height: 2,000 mm, total length: 3,095 mm, total width: 1,330 mm, overall weight: 700 kg, Equipment: documentation/manual, 2023 Good condition For inquiries, please contact: Gergely Repka 06707739050 Professional edge banding machine suitable for edge sealing and post-processing of panel-format sheet materials. It can be used for particleboard, MDF, furniture board, table tops, etc. Key technical data: * Coil edge banding: 0.4–3 mm * Strip edge banding: 0.4–5 mm * Maximum edge height: 55 mm * Processable sheet thickness: 8–50 mm * Edge banding cross-section: max. 5 × 50 mm (material-dependent) * Minimum workpiece width: 70 mm * Minimum workpiece length: 180 / 210 mm * Feed speed: 9 m/min * Manually adjustable pressure beam * Extendable workpiece support with 500 mm distance Itsdjzi Am Nopfx Ah Eol Equipment: * Edge Control BC15 control system with a 15.6" touchscreen * Vi.se. (Visual Setting) digital setting system for quick and accurate machine adjustment * FG101 pre-milling unit with 2 diamond milling heads * MG101 edge feeding unit * Glu Jet GJ101 hybrid adhesive technology (2.3 kW / 50 Hz) with automatic adhesive height adjustment * 1.4 kg adhesive tank (for 4 cartridges) * Glu Jet cleaning tank * Automatic refilling system * DW101 pressing unit * KA101 pneumatic end trimming unit, 1 motor version * 0.22 kW * 12,000 rpm * FR101 profile smoothing unit * chamfering and radius function * 2 × 0.37 kW * 12,000 rpm * 2 replaceable HW milling heads Ø75, Z4, R2 * FF101 corner rounding unit with dual linear guide * ZK101 scraping unit R=2.0 mm * Chip collection system * FK101 surface scraper unit * SW101 polishing unit * 2 × 0.13 kW * 1,400 rpm * 2 textile polishing discs, 120 mm * Adjustable from 0–5° * TR101 spraying unit for infeed and outfeed sides

Condition: like new (used), Year of construction: 2017, functionality: fully functional, total length: 1,880 mm, total width: 1,000 mm, total height: 1,850 mm, overall weight: 148 kg, Professional automatic double-clipping machine in excellent condition. Designed for fast and reliable sealing of sausage casings, ensuring consistent results and efficient production. Robust, hygienic, and ideal for industrial meat-processing applications. Ready for immediate use. Itedpjz Dab Rsfx Ah Esl

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 630 mm, LATHE TECHNICAL SPECIFICATION – PERFORMANCE OVERVIEW Workpiece Capacity Turning diameter over bed (nominal / max): 630 mm / 660 mm Turning diameter over carriage: - Short slides: 400 mm - Long slides: 320 mm Max. swing in front of faceplate notch: 720 mm Notch length: 265 mm Over bed: 305 mm Over floor: 1125 mm Machine Construction & Spindle System Bed width: 550 mm Spindle bore: 72 mm Faceplate: - Diameter: 630 mm - Width: 120 mm Tooling & Setup Tool cross-section (cutter): 40 × 40 mm Tool holder side length: 200 mm Spindle & Drive Performance Main motor speed: 1400 rpm Spindle speed steps: 18 Max. permitted faceplate speed: 560 rpm Feed Ranges Longitudinal feeds: - Steps: 68 - Range: 0.035–10 mm/rev Cross feeds: - Steps: 68 - Range: 0.014–4 mm/rev Rapid Traverse Rates Longitudinal: 5000 mm/min Cross travel: 2000 mm/min Thread Cutting Capability Metric threads: - 84 types, 0.2–224 mm Inch threads: - 94 types, 140–1/8 TPI Module threads: - 72 types, 0.1–112 Pitch range: - 94 types, 280–1/4 Isdpfxjx Acpds Ah Estl Machine Dimensions Overall length: 2300 mm + distance between centers Width: 1850 mm Height: 1725 mm Ask for a testing video! Robust and precise heavy-duty lathe featuring wide turning capacity, extensive thread cutting options, and high feed/rapid traverse performance. Ideal for demanding workshops requiring versatility, power, and reliability.

Year of construction: 1967, condition: used, Swing over bed: 540mm, swing over carriage: 280mm, max. cross slide travel: approx. 410mm, max. compound slide travel: approx. 140mm, tailstock quill travel: 225mm, main spindle speed steps: 24, spindle speed: 9-1400rpm, 32 longitudinal feeds: 0.063-2.24mm/rev, 32 cross feeds: 0.032-1.12mm/rev, metric thread pitch: 0.25-560mm, module threads: module 0.1-50, diametral pitch threads: pitch 160-0.5, center height above flat guideway: 265mm, center height above top of V-way: 247mm, bed width: 403mm, main spindle with spindle nose according to DIN 55022: size 11, spindle bore: 103mm, internal taper: 1:20, largest diameter: 109mm, Morse taper of centers: No. 5, leadscrew pitch, standard: 12mm, tailstock quill diameter: 80mm, standard drive power: 18.5kW, rated speed of drive flange motor: 1400rpm, turning tool cross-section according to DIN 770: 25x25mm, max. faceplate diameter: 500mm, max. three-jaw and four-jaw chuck diameter according to DIN 6350: 315mm, weight: 3t, with work light, coolant system with chip tray, four-way tool post with face serration for one-hand operation on the compound slide, operating manual and fixed steady rest. An on-site inspection is possible. Iedozzqblopfx Ah Estl

Condition: excellent (used), Here, we offer an ETSYSTEM electronic load with GPIB interface. 32615A AC & DC Electronic Load GPIB/RS232, 300V, 108A, 10800VA The 3260A series is a 300V high-performance AC and DC load in a single unit, offering an ideal test solution for UPS, AVR, and DC/AC inverters, especially for devices under test with step or square wave forms. Each AC&DC load in the high-performance series features its own control and display panel and a 5-status recall/memory storage, enabling more efficient load setup. The adjustable power factor setting (PF, range: 1, 0.85 ~ -0.85) expands the simulation of the test environment. The integrated GO/NG measurement device test function provides a quick diagnosis of test results for production and QC test throughput. Features: Voltage, current, power, and VA variable display. CC, linear CC, CR, and crest factor mode. GPIB/RS232 interface and 5 status recall/memory storage. Power factor (PF) adjustable: 1, 0.85 ~ -0.85. Upper/lower threshold capability. Itsdszd Uh Iopfx Ah Eol Protection against V, I, W, and ℃. Dual 4 1/2-digit display for voltage, current, power, and VA. Suitable for sine, square, and step waves. Width 600 mm, Height 1506 mm, Depth 600 mm 196 kg Type: 32615A AC & DC Electronic Load Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 06220420, functionality: fully functional, operating hours: 100 h, power: 7 kW (9.52 HP), input voltage: 380 V, input frequency: 50 Hz, cutting width (max.): 460 mm, control type: NC control, actuation type: hydraulic, rotational speed (max.): 80 rpm, rotational speed (min.): 20 rpm, total height: 1,900 mm, total length: 2,820 mm, total width: 2,200 mm, overall weight: 2,300 kg, Equipment: documentation/manual, Double-column structure, with a round-section main sliding column and a rectangular-section secondary column. CNC with touch-screen for programming the head lift, clamping, and piece feeding, inverter-controlled blade speed adjustment, and a feed repeater settable from 1 to 9 times. Blade descent controlled by a probe, workpiece feed roller conveyor. Carbide blade guides and bearings, hydraulically Itodpfx Aheyvh Nxs Eol locking clamps, auger chip conveyor, coolant system, lighting system, motorized blade cleaning brush, hydraulically adjustable belt tension. Operation and maintenance manual. With Extra 2m roller table 1pc (500mm width) NO CE mark, NO CE declaration of conformity

Condition: used, Year of construction: 2024, Integrated SIAD Industrial Hydrogen Compression System (249 kW) - Manufacturer: SIAD Macchine Impianti (compressor), SAEP & FLOVEX (exchangers), Capelli & Cie (vessels). - Type: Turnkey reciprocating hydrogen compressor skid designed for ATEX Zone 2 hazardous areas. - Applications: Hydrogen gas (H2) boosting for chemical processing, mobility, and energy storage. Itedjztw Upjpfx Ah Ejl Technical Specifications - SIAD HMS4-2 Compressor (2024): 249 kW | 384 kg/h | 0.1 to 3.5 bar(g) | ATEX Zone 2 - IIC - T3. - SAEP Gas Exchanger R-36050 (2024): 248 L volume | 10 bar(g) | -20 to +200 °C. - FLOVEX Oil Cooler (2024): BEM/OTT 403.4-13-2 | ASME VIII Div.1 | 10 bar(g). - Capelli Main Buffer Vessel (2024): 10,250 L | P265GH Carbon Steel | -1 to +0.5 bar(g) | 2,310 kg. - Capelli Condensate Tank (2024): 1,140 L | 316L Stainless Steel (X2CrNiMo17-12-2) | 730 kg. Working Principle & Highlights Low-pressure hydrogen (0.1 bar) is boosted to 3.5 bar(g) at 384 kg/h by the 249 kW SIAD unit. Thermal management is handled by FLOVEX and SAEP exchangers, while the 10,250 L Capelli tank absorbs system pressure surges. - ATEX Compliant: Certified for hazardous Zone 2 gas group IIC environments. - Robust Metallurgy: Built with P265GH steel and 316L stainless steel for H2 service durability. - Modular Skid: Plug-and-play setup combining compression, cooling, and buffer storage.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 3.8203, travel distance X-axis: 7,570 mm, travel distance Y-axis: 4,900 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 18,700 mm, table length: 6,850 mm, table width: 2,250 mm, total width: 8,500 mm, spindle speed (min.): 5 rpm, spindle speed (max.): 2,000 rpm, total height: 7,050 mm, table height: 300 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 2,750 mm, type of input current: AC, table load: 60,000 kg, workpiece weight (max.): 60,000 kg, distance table to spindle center: 2,500 mm, overall weight: 145,000 kg, spindle motor power: 63,000 W, feed length W-axis: 2,000 mm, MODEL: Portal Type AGE: 1990 S/N #: 3.8203 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 7570 mm Y-Axis Head Travel: 4900 mm Z-Axis Ram Stroke: 1000 mm, W-axis traverse movement: 2000 mm Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 2600-2750 mm Distance Table To Ram Face: 2500 mm Table Size: 2x3000+850 mm x 2250 mm, two tables for split or integral operation Spindle (Quill) Diameter: 225 mm Spindle Taper: ISO #50 Spindle Speeds: 0-2000 RPM Spindle Motor: 63 KW EQUIPPED WITH: SIEMENS System 840D CNC Control, new in 2008 Itodpjyl S Ngefx Ah Esl CNC biaxial continous milling head Right angle Milling Head with Auto Indexing Right Angle Head prolonged with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors Way Covers 63 KW Spindle Motor Rapid movements: W-2000 mm/min, Z-10.000 mm/min, X and Y-15.000 mm/min Table loads: 30.000 kg+30.000 kg, max 60.000 kg Weight of the machine: 143.000 kg Outside dimensions: 18.700 x 8.500 x 7050 mm

Condition: ready for operation (used), functionality: fully functional, A good used barcode verification system featuring twin belt drive with speed control - system was used for automatic labelling of the underside of boxes/cartons on a production line (label applicator was removed and sold) - barcode scanner is integrated to detect the presence of the label (which contained a barcode) and if no label detected the system alarms and stops - barcode scanning can be disabled if not required - setup currently for EAN 13 Barcodes and has Teach facility built in for new barcode or changeover Conveyor could also be used for Ink Jet Printing of underside of packs Iedswufb Ajpfx Ah Ejtl Could be refitted with your own label applicator also - mounting boss still in place for original Pago Applicator Single phase 240Volt AC supply Ready to ship worldwide

Condition: used, Year of construction: 1998, functionality: fully functional, Laminating machine LAMINA 1114 FA. Manufactured in SWEDEN; year: 1998 Max format: 1400×1100 mm Min format: 200×350 mm Top sheet: 130–450 g/m2 Bottom sheet: from 250 g/m2 Material thickness: 0.6–10 mm Feeder height: 500 mm (bottom), 300 mm (top) Production depending on material: up to 1,500 sheets/hour Isdpfxey Ryhve Ah Eotl The machine has been dismantled. At the time of disassembly, it was operational.

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 467334, Manufacture year 2010 Machine specifications: - Push infeed, max. length 6300 mm - Automatic length measuring and chalk reader - Cutting width 40 – 420 mm - Cutting height 15 – 170 mm - Min. cross section 20 x 10 mm - Max. cross section 270 x 170 / 410 x 30 mm Iedoypvdijpfx Ah Eotl - Motor 13.5 kW - Total electrical load approx. 22 kW -Operating pressure approx. 8 bar - Saw blade diameter 630 mm / bore 30 mm Consisting of: 1. Cross chain infeed system 8 pc. chain transport with 3 latch rows 2. Push infeed system with liftable pusher Infeed length 6300 mm, length detecting and chalk reader 3. OptiCom Direct controller 4. Opticut cross cut saw unit S90 XL With side pusher and waste gate 5. Outfeed transport belt

Condition: used, Year of construction: 1992, saw blade diameter: 550 mm, overall weight: 1,500 kg, power: 13 kW (17.68 HP), No. 3260 CNC cross-cut system Paul 14KE Ijdpeyl R Uuofx Ah Eotl Used, year of construction 1992 (overhauled by the manufacturer in 2012) According to our customer / the previous owner, the machine is fully functional and can be viewed and tested on site Saw blade diameter 550 mm Speed 3500 rpm Bore 120 mm Connected load 13 kW Workpiece length 600 - 7000 mm Workpiece width maximum 380 mm Workpiece thickness maximum 100 mm Wood cross-section minimum 12 x 40 mm Wood cross-section maximum 45 x 380 / 100 x 200 mm 6 driven bottom rollers 6 non-driven top rollers CNC control MAXI x.3 Complete with infeed, outfeed conveyor, switch cabinet and control Technical documentation available Weight approx. 1500 kg Sale on behalf of customer, ex location near 99091 Erfurt, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, Year of construction: 2012, Overview  This complete brewhouse was manufactured in 2012 and enables the production of 1,000-liter brews. The system works with steam and includes brewing, fermentation and storage tanks. It is immediately available and is currently installed and ready for operation in the production facility. The seller confirms that the system has worked perfectly until recently. The boilers have a copper coating, while the rest of the system is made of stainless steel. Details - Wort yield: 1,000 liters per brew - Heating system: Steam - Current status: Installed and ready for operation - Availability: Immediately Scope of delivery  - Brewhouse | Mini Brewery System | CI T 10 | 2012 - 2 kettles (mash tun above the whirlpool as one unit + separate boiling kettle) - Steam boiler | Mini Brewery System | - | 2012 (electric) - Plate heat exchanger - Hot water tank | 1,500 L - Reverse osmosis system | ALFA | compact model | - - Capacity: 150-200 L/h Isdpfx Aov Da Dleh Eetl - 4x Isobaric fermenter | Mini Brewery System | 1,000L | 2012 - 4x Horizontal isobaric maturation tank | DuoTank | 500 L | 2018 - Cooling jacket & bag system for optimum beer preservation

Condition: used, functionality: fully functional, Year of construction: 2008, machine/vehicle number: HEB IPE section bending roll, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, shaft diameter: 200 mm, roller diameter: 650 mm, bending radius (max.): 1,000 mm, pipe diameter (max.): 250 mm, overall weight: 27,000 kg, input voltage: 380,440 V, input frequency: 5,060 Hz, Equipment: CE marking, documentation/manual, emergency stop, hardened rollers, Profile bending roll hydraulic model AR200, year 2008 make MG Italy Capacity bending chart and photos in enclosed Iodpfjz Dkr Hjx Ah Eetl -Technical data: Output shafts size 200 mm -Machine complete with set of rollers adjustable for the various shape of profiles. -Traction tool hydraulic operated for the HEB-beam - IPE - UNP bending the hard side. -Lateral correctors left and right side hydraulic operated in 3 direction. -Included additional set of rolls for pipe 6" inches -Machine with 3 rolls driven system with individual hydraulic motor and axial gear-unit on each shaft. -The 3 shafts working on bearings, heavy duty type with sealed lubrication. -Centralized control panel movable on wheels with all electric commands. -Dual rolling speed up to 5 mtr/min with automatic balancing system between the 3 rolls. -Safety devices in compliance with European regulation. CE mark. -electric 30 Kw on the hydraulic power unit- voltage 380/50 -Digital position readout on the bending rolls -Manuals and schematics all available along with the machine. -Machine delivered in working condition. CAPACITY CHART IN ENCLOSED MG MODEL AR200 SECTION BENDING ROLL

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, total length: 495 mm, total height: 520 mm, total width: 457 mm, construction height: 300 mm, construction width: 240 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading are to be organized by the buyer! The system will be available from November 2026! TECHNICAL DETAILS Build volume X-axis: 330 mm Build volume Y-axis: 240 mm Build volume Z-axis: 300 mm Filament diameter: 2.85 mm Nozzle diameter: 0.25 mm, 0.4 mm, 0.8 mm Printing speed: < 24 mm³/s XYZ resolution: 6.9 / 6.9 / 2.5 µm Layer resolution with 0.25 mm nozzle: 60–150 µm Layer resolution with 0.4 mm nozzle: 20–200 µm Layer resolution with 0.8 mm nozzle: 20–600 µm MACHINE DETAILS Technology: Fused Filament Fabrication (FFF) Print head: Dual extrusion print head with automatic nozzle lift system and interchangeable print cores Supported materials: PLA, Tough PLA, Nylon, ABS, CPE, CPE+, PC, TPU 95A, PP, PVA, Breakaway Operating temperature: 15–32 °C Relative humidity during operation: 10–90 % RH, non-condensing Non-operating temperature: 0–32 °C Supplied software: UltiMaker Cura, Cura Connect Supported operating systems: macOS, Windows, Linux Plugin integration: SolidWorks, Siemens NX Supported file types: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG Printable formats: G, GCODE, UFP Connectivity: WLAN, LAN, USB Display: 4.7 inch (11.9 cm) color touchscreen Monitoring: Live camera Operating noise: 50 dBA Build plate temperature: 20–140 °C Build plate leveling: Active leveling Nozzle temperature: 180–280 °C Nozzle preheating time: < 2 min Build plate preheating time: < 4 min from 20 °C to 60 °C Iedpszx S D Asfx Ah Eotl Power consumption: 500 W Dimensions & Weight Machine dimensions: 495 × 457 × 520 mm Machine dimensions with Bowden tubes and spool holder: 495 × 585 × 780 mm Net weight: 20.6 kg Shipping weight: 29 kg Shipping carton dimensions: 650 × 600 × 700 mm FEATURES Dual extrusion print head Automatic nozzle lift system Interchangeable print cores Heated glass build plate Heated aluminum build plate PEI build plate Active build plate leveling Abrasion-resistant dual-gear feeder NFC scanner for material recognition Color touchscreen Live camera Spool holder with material guide Print Core AA 0.4 mm, 2 pieces Print Core BB 0.4 mm, 1 piece Nozzle cover, 3 pieces Power cable User manual CE marking

Condition: used, Year of construction: 2009, Liebherr Crane 160 HC-L 8/16 incl. remote control: 160 HC-L 8/16, height: 37.5 m, jib length 55 m, works number 30349039, year of manufacture: 2009 incl. the following crane parts: 1 cross-shaped undercarriage 2 base ballast A 7.5 t 12 base ballast B 4.8 t 1 jib 611, 10.7 m 1 jib 621, 8 m Itjdpfxezzg Tqs Ah Ejl 2 jibs 622, 10.35 m 1 jib 631, 5.18 m 1 jib 641, tip 1 base tower, 12.42 m 5 tower sections, 4.14 m "Completely refurbished, sandblasted and newly painted! This crane has been completely overhauled and is in excellent condition. Old layers of paint and rust were thoroughly removed by sandblasting before a high-quality new paint coating was applied. Subject to changes, errors and prior sale! You can find more vehicles on our website. Sales are exclusively subject to our general terms and conditions – see our homepage. Important note – important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal note: This sales advertisement does not constitute an offer in the sense of § 145 BGB. Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.