Used Scm Sigma Impact 90 for sale (12,887)

Condition: good (used), Year of construction: 1994, functionality: fully functional, Electromagnetic belt separator Steinert length: 1500mm width: 900mm Iodpfx Aevyuy Hohyeih Year of manufacture: 1994 Protection class of magnetic housing IP44 Magnet power 2,2 kW; Material flow rate 1.8 m/s; Drive power 2,2 kW; Control voltage 230 V; Operating voltage 3x400 V; Frequency 50 Hz; weight: 2200kg

Condition: used, Year of construction: 2004, PLC control Panel height mm 10-60 Solid mm 15 Pvc / Abs mm 3 Feed speed up to mt/min 12-18 Working height adjustable by PLC Adjustable panel support guide Side roller conveyor with idle wheels for panel support Rightening unit Roll holder plate Gluing unit for EVA glue with pre-melter Edge pressure unit End trimming unit Trimming unit with overlapping motors Tiltable chamfering unit Rounding unit with 4 motors Edge scraper unit Glue scraper unit Iisdpfeu Tyx Aox Ahysh Oscillating brush unit

Condition: used, Wide belt sander SBF SATEFANI 2W126   - The machine in stock - Reconditioned - very good condition   TECHNICAL PARAMETERS :   - Maximum grinding width 1100 mm Iiedpocvwf Tofx Ahyeh - The maximum height of the element 160 mm - The minimum amount of grinding 3 mm   - The main engines 2 x 11 kW - Engine feed 2.2 kW - Engines height adjustment 0,37 kW   - 1 rubber roller 65 shore with a diameter of 270 mm - 2 rubber roller 45 shore with a diameter of 400 mm   - Two types of feed speed - Pneumatic oscillation on krańcówkach - Nozzle diameter 2 x 150 mm - Tape in very good condition   Overall dimensions machine: - Length 280 cm - Width 180 cm - Height 250 cm - Weight ~ 3000 kg

Condition: used, Year of construction: 2021, MEGA 300 TS Numerical Control Panel height 60 mm PVC/Abs mm 3 Feed speed up to 22 m/min Working height adjustable electronically by C.N. Motorized rubber belt with higher pressure Introduction system for small panels Panel support guide with electronic adjustment by C.N. Side roller conveyor with idle wheels for panel support Anti-adhesive group Rectifier unit with two motors electronically adjustable by C.N. Roll holder plate for delicate edges Edge magazine with 2 positions Gluing unit for EVA glue with glue tank and pre-melter Iiodpot Hal Dsfx Ahyoh Edge pressure group on straight profiles with pressure rollers electronically adjustable by C.N Non-stick group Trimming unit with 2 motors with automatic inclination adjustment Trimming unit with 2 superimposed motors Trimming / gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 motors Edge scraper unit electronically adjustable by C.N. Glue scraper unit Oscillating brush group Hairdryer group

Condition: excellent (used), functionality: fully functional, planing width: 630 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 4,500 rpm, total length of planing tables: 1,250 mm, total width: 1,050 mm, total height: 805 mm, overall weight: 1,000 kg, SCM S 63 PLANER – 630 mm | 4 KNIVES | 5.5 kW | JBS MACHINES! Professional SCM S 63 planer with a planing width of 630 mm. Robust, industrial-grade construction designed for precise wood processing. A machine for carpentry workshops, production facilities, and demanding users seeking a reliable machine with a large working width, rather than a lightweight design intended for occasional use. SCM is a renowned Italian manufacturer of woodworking machinery. The S 63 model features a rigid construction, a large worktable, and a 4-knife cutterhead, making it ideal for daily woodworking tasks. KEY ADVANTAGES: - Planing width up to 630 mm – allowing for the processing of wide workpieces - 4-knife cutterhead (traditional knives) - 7.5 kW motor – suitable for professional use - Robust SCM construction – machine designed for workshop use - Adjustable feed rate via lever - Large worktable - Construction ensuring stability during operation - Ideal machine for carpentry workshops, furniture, door, stair, and wood element production TECHNICAL DATA: - Manufacturer: SCM - Model: S 63 - Planing width: 630 mm - Maximum planing height: 240 mm - Minimum planing height: approx. 3 mm - Cutterhead: 4-knife - Number of knives: 4 pcs. - Cutterhead speed: 4500 rpm - Feed rate: 6 / 9 / 12 / 18 m/min - Motor power: 7.5 kW - Power supply: 380 V - Table dimensions: 630 × 1000 mm MACHINE DIMENSIONS: - Length: 1250 mm - Width: 1050 mm - Height: 805 mm Weight: 1000 kg WHY IS IT WORTH IT? If you are looking for a real workshop machine with a width of 630 mm that will allow you to process larger workpieces, the SCM S 63 is a solution worth considering. This is not a small, lightweight planer for occasional use. The large working width, heavy-duty construction, and 4-knife cutterhead make this machine an excellent choice for a facility that needs efficient wood processing. Machine available for immediate delivery. Before purchasing, you can view and test the machine. Please contact us – we will be happy to provide additional information about the machine, transport, and loading options. It is possible to test the machine on-site. Financing options available through leasing or installments. WE ORGANIZE TRANSPORT. WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl Iiedpfx Ahsz A Apzeyjh

Condition: used, Year of construction: 1985, Dimensions of the thickness planer table (L x W): 500 x 800 mm Overall length of the surfacing tables: 2,200 mm Working width: 500 mm Isdpfez Agd Sox Ahyeih Maximum material removal: 8 mm Working height min./max.: 3 / 235 mm Feed rates: 7.5 / 15 m/min Cutterhead diameter: 120 / 4 mm/knife + 2 scoring knives Rotational speed: 5,000 min-1 Motor power: 5.5 kW Manual thickness planer table adjustment via handwheel Setting gauge

Condition: used, functionality: fully functional, total width: 1,280 mm, total height: 1,920 mm, total length: 1,560 mm, working width: 900 mm, overall weight: 1,100 kg, type of input current: three-phase, input voltage: 400 V, SCM Sandya Uno Wide Belt Sander Working width: 900 mm Iiedpfezvfb Njx Ahysh Working height: 3–160 mm Number of sanding units: 2 Unit with rubber roller Combi unit with pad Main motor power: 11 kW Pneumatic oscillation Abrasive belt dimensions: 930×1525 mm Two feed speeds: 4.5–9 m/min Machine dimensions: 1560 x 1280 x 1920 mm Weight: approx. 1100 kg

Condition: good (used), functionality: fully functional, power: 5.5 kW (7.48 HP), actuation type: electric, Thickness planer SCM, 51cm width, electric height adjustment, 4 cutterhead. Iiodpfxszxbb Rs Ahyjh

Condition: ready for operation (used), Year of construction: 2013, machine/vehicle number: AB-216795, functionality: fully functional, planing width: 230 mm, spindle diameter: 40 mm, number of spindles: 5, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Number of spindles: 5 pcs. Min. planing width: 25 mm Max. planing width: 230 mm Min. planing height: 6 mm Max. planing height: 120 mm Infeed table length: 2,470 mm Spindle 1 Spindle type: Bottom Motor power: 5.5 kW Spindle diameter: 40 mm Planing cutterhead speed: 6,000 rpm Max. planing cutterhead diameter: 180 mm Spindle 2 Spindle type: Right Motor power: 7.5 kW Ijdjzxchljpfx Ahyjih Spindle diameter: 40 mm Planing cutterhead speed: 6,000 rpm Max. planing cutterhead diameter: 180 mm Spindle 3 Spindle type: Left Motor power: 7.5 kW Spindle diameter: 40 mm Planing cutterhead speed: 6,000 rpm Max. planing cutterhead diameter: 180 mm Spindle 4 Spindle type: Top Motor power: 9 kW Spindle diameter: 40 mm Planing cutterhead speed: 6,000 rpm Max. planing cutterhead diameter: 180 mm Spindle 5 Spindle type: Bottom Motor power: 5.5 kW Spindle diameter: 40 mm Planing cutterhead speed: 6,000 rpm Max. planing cutterhead diameter: 140 mm Feed rate: Automatic Min. feed rate: 5 m/min Max. feed rate: 25 m/min Feed rate control: Variable Conveyor motor power: 3 kW Conveyor drive: Cardan shaft drive Diameter of feed rollers: 140 mm MACHINE DETAILS Lubrication system: Manual Diameter of dust extraction nozzle: 120 mm Voltage: 400 V Current consumption: 57 A Fuse rating: 63 A Power: 10 kW Dimensions & Weight Dimensions (L x W x H): 4,150 x 1,650 x 1,750 mm Dry weight: 2,600 kg Transport packages: 1 pc. EQUIPMENT CE marking Documentation Cardan shaft drive Manual lubrication system

Condition: used, Year of construction: 2022, functionality: fully functional, Equipment: CE marking, Machine is USED, excellent condition, first owner. Machine can be packed and ready for transport from Sellers warehouse in Croatia witihn 5 days after order confirmation ! OLIMPIC k 560 composition "T-ER2" (40) - European safety regulations (CE norms) - ”StarTouch" electronic control with 12" display touchscreen n° 100 working programs which can be customized - Electronic positioning of top presser - Panel spacer on infeed fence - "Nesting" copying device kit - "AAR" anti-adhesive unit - Spray-mist device for edge finishing - Spray-mist device for delicate edges - RC-N glue scraping unit - "SP-V" brushing unit 1 - "EASY SIZE" device - Infrared ceramic lamp - Gluing unit with pre-melting device - "SGP" glue pot with automatic dosing by NC in substitution of the standard one - Diamond tools for pre-milling unit h=64-no.2 knives TECHNICAL DATA Variable track feed speed m/min 12 -18 Panel thickness mm 8-60 Thickness of edges in strips mm 0,4-6 Thickness of rolled edges mm 0,4-3 Max. section of rolled edges mm² 135 Iiedpfxezv Tibs Ahyeh Distance between two successive panels mm 600 Minimum panel length (100 mm min. width) mm 140 Min. length of edge in rolls mm 180 Min. length of edge in strips mm 220 Min. panel width (210 mm min. length) mm 95 Opening for panel support roller mm 500 Worktable height mm 900 MACHINE DIMENSIONS (transport): lenght: 5.005 mm wide: 1.000 mm height: 1.950 mm

Condition: used, Year of construction: 2014, power: 6.6 kW (8.97 HP), travel distance X-axis: 3,681 mm, travel distance Y-axis: 1,655 mm, travel distance Z-axis: 250 mm, workpiece length (max.): 3,050 mm, workpiece width (max.): 1,252 mm, workpiece height (max.): 180 mm, number of axes: 3, Equipment: CE marking, documentation/manual, F11 Drilling Unit Includes: 7 independent vertical spindles (4 on the right and 3 on the left) Drill chuck M 10 / diameter 11 mm Distance between spindles 32 mm 2 double horizontal drilling heads (1+1), 1 in X and 1 in Y (drill chuck M8 / diameter 9 mm) Drill speed 4000 rpm 1 integrated saw blade in X direction (max. diameter 120 mm) Saw blade speed 5000 rpm Motor power 2.2 kW Vertical travel with pneumatic release of the entire unit 250 mm Vertical travel with pneumatic release per spindle 60 mm Extraction hood all around 6.6 kW – 9 HP electric spindle Includes: Tool holder HSK F 63 Iodpjz Aubxsfx Ahysih Speed 1500 - 24000 rpm Motor power (S1/S6) 5.5/6.6 kW (7.5/9 HP) from 12000 to 18000 rpm Right and left rotation Static inverter for stepless speed adjustment and immediate stopping of rotation Extraction hood all around Tool changer TR10 10-position lateral tool changer for tools and angle gearboxes Central lubrication with manual pump Vacuum pump, output 90/108 m³/h at 50/60 Hz 8 TVF work tables and 18 interchangeable vacuum suction cups 120x120 mm Second set of stops Laser device for positioning the suction cups

Condition: excellent (used), functionality: fully functional, chain width 200mm Iijdpfx Aezxpyuohysh motor power 18,5kW max material heigth 120mm Refurbished track variable regulated feeder manual regulation of pressure rolls manual regulation of shaft max blade diameter 350mm

Condition: excellent (used), functionality: fully functional, working width 240mm working height 120mm 6 spindles spindles set: bottom/right/left/top/top/bottom spindles speed 6000 RPM - two last 8300 RPM Iiodpfszxp I Sex Ahysh two axes heads regulation spindles diameter 40mm electric regulation of working height variable regulated feeder pneumatic pressure of feeding rolls

Condition: excellent (used), Year of construction: 2018, Wide-belt sanding machine SCM DMC SYSTEM TM 1650 Year of manufacture: 2018 Iisdpfx Ahozx R Dneyeh Sanding width: 1,650 mm Workpiece thickness (min.): 3 mm Vertical clearance: 170 mm

Condition: used, functionality: fully functional, SCM Sandya 5 wide belt sander Working width: 1100 mm Sanding height: 4 – 170 mm 1 metal sanding unit 2 combi sanding units Electric height adjustment Ijdpfx Aozx Afqohysih Optical oscillation

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) Vertical position of the panel (workpiece) Movable panel (workpiece), movable working head Numerical Control MAESTRO consolle "eye-M PRO" Software “3D PROBE" per controllo automatico dimensioni pannello Safety cabin (enclosure) of the working head No. 2 Workpieces fixing clamps (for the panels introduction in the working area Minimum workpieces dimensions (X - Y - Z) mm 200 x 50 x 8 Maximum workpieces dimensions (X - Y - Z) mm 3050 x 1300 x 95 Total installed power (A) 43 WORKING GROUPS: No. 1 Drilling head (5-sided with Ro.Ax. roto-axial technology) F31LTC (power Kw 3.9) with spindles: - No. 21 Independent vertical boring spindles - No. 10 Independent horizontal boring spindles (6 in X + 4 in Y) - No. 3 Independent boring spindles (for hinges) No. 1 Circular Grooving Saw (on X axis) dia. (mm) 125 No. 1 Vertical electro-spindle (HKS63) power Kw 7,5 Iijdpfx Ahszx Dvdeyeh Automatic Tools Changing System - Tools storage plate (No. 6 folds-positions)

Condition: good (used), Year of construction: 2018, functionality: fully functional, Equipment: CE marking, scorer, Horizontal panel dividing saw / Horizontal panel saw with lifting table feed Manufacturer: SCM / Gabbiani Type: Gabbiani ST 115 Iedpozyx Evefx Ahyoih Year of manufacture: 2018 Horizontal beam saw with lifting table feed from the rear, originating from a parquet factory. Cutting length approx. 3200 mm Cutting depth on the lifting table approx. 1850 mm Max. stack height on the lifting table (with supports) approx. 600 mm Saw blade projection 115 mm Variable saw carriage speed 0 - 135 m/min. Variable sliding table speed 0 - 70 m/min. Motor of the main saw blade approx. 9 kW Main saw blade speed 3900 rpm Saw blade diameter 400 mm Motor of the scoring saw approx. 1.8 kW Scoring saw speed 6300 rpm Scoring saw blade diameter 160 mm 6 clamping devices (3 of which with front aligner) 2 air cushion tables, each with blower Voltage: 400 V, 3 phases, 50 Hz, 43 A Weight approx. 5500 kg Data partially estimated and taken from the brochure.

Condition: good (used), Year of construction: 2007, functionality: fully functional, number of axes: 5, number of slots in tool magazine: 16, controller manufacturer: scm, total height: 3,200 mm, total length: 5,300 mm, total width: 3,000 mm, overall weight: 4,500 kg, table length: 3,100 mm, table width: 1,250 mm, year of last overhaul: 2024, Equipment: CE marking, SCM Record 110 AL Prisma 5-Axis CNC Machining Center | Year of manufacture 2007 | Immediately ready for operation | Complete with tool package Ijdpfoz Dq Tqsx Ahyjih For sale is an SCM Record 110 AL Prisma, a powerful 5-axis CNC machining center from the year 2007. The machine was in continuous operation until disassembly and can, of course, be inspected and tested while powered on. It operates reliably and precisely and is ideally suited for furniture, interior design, stair and door manufacturing. A detailed video demonstrating its functionality is available on YouTube and shows the machine in operation for approximately 30 minutes. Included in the scope of delivery: ✔ SCM Record 110 AL Prisma 5-Axis CNC Machining Center, equipped with tools. ✔ Complete set of machine tools ✔ Tool magazine ✔ Vacuum pump ✔ All vacuum cups ✔ Special vacuum cups for door processing (see video & images) ✔ Machine control PC ✔ All existing machining programs remain on the computer The machine is therefore sold complete and ready for operation. The PC from the office with PaletteCAD license can also be purchased. The video demonstrates, among other things: Manufacturing of a complete cabinet side Machining of a center panel Milling of an outer contour Milling of a rectangular pocket True 5-axis machining Creating an exact 90° internal corner using a 60° chamfering cutter The video impressively demonstrates the precision and technical condition of the machine. Technical data Manufacturer: SCM Model: Record 110 AL Prisma Year of manufacture: 2007 5-axis machining Vacuum table Tool changer Control PC included CE version Condition The machine is in good condition and was in daily use until disassembly. Inspections and a test run are expressly welcome after prior arrangement. Disassembly / Loading Approximately one week of lead time should be planned for the disassembly of the machine. We will, of course, assist with the organization of shipping/transport, which can be arranged and commissioned if required. The costs will be borne by the buyer. We can also disassemble the machine and load it for you. Sold on behalf of a customer by Bima Maschinen. The machine is located in Luxembourg, near the German border. An invoice as an intra-community supply is possible if the location is outside of Luxembourg, within the EU.

Condition: good (used), Year of construction: 2019, functionality: fully functional, New price including transport and installation approx. €850,000 net. The machine was professionally disassembled by qualified technicians and subsequently stored. An inspection at the location in the Netherlands is possible after prior appointment. Technical data: Manufacturer: SCM Stefani Type: One 108 Cell Year of construction: 2019 Operating hours: approx. 5,600 Feed speed: 10–40 m/min Maximum speed with pickback: 30 m/min Workpiece length: approx. 250–3,000 mm Workpiece width: approx. 130–1,200 mm Workpiece thickness: 10–60 mm Maximum workpiece weight pickback: 80 kg Machine length edge banding machine: approx. 11,550 mm Installation area of the complete cell according to layout: approx. 30,270 × 13,166 mm Working height: approx. 970 mm Connection: 400 V / 50 Hz with neutral conductor Workpiece feed: Motorized feed roller table Easy Order BN+ automatic workpiece feed Automatic alignment for longitudinal and transverse processing Servo-controlled workpiece centering Automatic adjustment to different workpiece dimensions Large lateral workpiece support Edge and glue system: Nordson AltaPUR 4HO PUR hot melt unit Melt-on-demand technology Melting capacity up to approx. 6 kg/h SGP glue reservoir with CNC-controlled glue metering Additional interchangeable SGP glue reservoir Separate preheating trolley for one glue reservoir Workpiece edge preheating Automatic positioning of the edge guide and pressure rollers 12-position vertical edge magazine with automatic edge changing Processing of roll material up to 3 mm Designed for thin edge, 20° bevel, and radii R1, R1.5 and R2 Machining units: Pre-milling unit RT-H/RT-X with 2 × 4 kW Electronic positioning of the pre-milling unit Trimming unit YU/SP-1000 with automatic saw blade inclination Flush-cutting and pre-milling unit R-E CNC-controlled RSU-E Hi-Drive Multiedge fine milling unit Processing of thin edge and R1, R1.5 and R2 Round 4 four-motor corner rounding unit Automatic selection of four profiles MX80 HSK milling unit with 10 kW Iijdpez Aquhjfx Ahyeh CNC-controlled horizontal and vertical positioning Automatic pivoting from 0–90° Suitable for continuous or recessed grooves on the top, bottom and workpiece edge CNC-controlled RCS-E Multiedge radius drawing blade unit Edge sanding unit GT with oscillating sanding belt Two glue seam drawing blade units RCA/2C Polishing unit SP/F with oscillating Riepe polishing pads Spraying devices: Release agent spraying device at the machine infeed Antistatic and coolant spraying device Spraying device for sensitive or foiled edges Cleaning agent spraying devices for the glue seam drawing blades Spraying device for the first pressure roller Automatic pickback return: Gantry return system with three servo-controlled axes Workpiece pick-up via vacuum gripper Automatic rotation by 0°, 90°, -90° and 180° Automatic return to the machine infeed Up to 10 return cycles per minute without rotation Up to 9 return cycles per minute with 90° rotation Motorized conveyor belts Additional second unloading station Central control via the machine control system Location: Netherlands Inspection: possible after prior appointment Condition: professionally disassembled and stored Availability: short notice Price: on request The technical data were compiled based on the available original documents. Errors, changes and prior sale are reserved.

Condition: used, machine/vehicle number: 008473, X axis working area: 5000 mm Iiedpfx Ahoywaf Ieyjh Y axis working area: 1640 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of drilling spindles: 10 Total number of tool changer positions: 36

Condition: excellent (used), Year of construction: 2019, Combined jointer and thicknesser SCM minimax fs 41e Year of manufacture: 2019 Power of drive motor: 5 kW Connection voltage: 400 V Mains frequency: 50 Hz Planer cutterhead type: TERSA – 4 cutterheads Speed: 5200 rpm Planing width, max.: 410 mm Feed rate: 6 / 12 m/min Dust extraction port: 2, diameter for thicknessing: 120 mm Jointer Infeed table, length: 1034 mm Chip removal, max.: 5 mm Dimensions and weights, length: approx. 2000 mm Width/depth: approx. 1110 mm Height: approx. 1115 mm Weight: approx. 430 kg TERSA cutterhead system enables particularly quiet operation. Helically toothed steel infeed roller for consistent and uniform material feed. Material feed with two speeds. Numerical display for thickness table height. The 2,000 mm long jointer tables facilitate easy jointing of large workpieces. Work tables are made of gray cast iron, annealed and stress-relieved, making them resistant and permanently flat. Sturdy, large aluminum jointer fence with round bar guide (1200 x 160 mm) Thickness table adjustment via handwheel with numerical display for planing height. The high machine weight ensures the highest precision and smooth operation. Powerful industrial motor Iisdpfszi Nhmsx Ahyoh Robust steel/gray cast iron construction.

Condition: like new (used), functionality: fully functional, Ferwood code: RS0003586 - Manufacturer code: CXSM20-75 - Condition: As new (ex-demo item) - Functionality: Fully operational - Compatible machine: - If interested, we offer overhauling service, please contact us. 1KG - 20X20X20 Isdpfsyrn U Ejx Ahyeih

Condition: excellent (used), Bargain in excellent condition: panel saw and spindle moulder with tooling Iodpfx Ajy Ni Ayohyeih

Condition: excellent (used), CNC Flexible Automatic through-feed ROUTERING, DRILLING and CUTTING (SPLITTING) LINE Min/Max workpieces (panels) width (X axis) with PWX100: mm 250 / 3000 Min/Max workpieces (panels) thickness (Z axis) with PWX100: mm 12 / 60 Min/Max workpieces (panels) length-depth (Y axis) with PWX100: mm 100 /1200 (o 600+600) With automatic base-boards handling A) Loader (Bridge Frame) "MAHROS" Double Station, Mod. Brush CF-SX/D, (with automatic martyr panel management system) and with WEBER Double Labeller B) 1° Motorized Roller table "MAHROS" LS with 90° motorized belts (from longitudinal to transverse) C) Connection transfer, with tilter (180°, up-side-down) "MAHROS" Mod. Rib/C HS-C D) Gantry (Portal) CNC (Drilling) "MORBIDELLI" PowerFlex (PWX) 100 - N° 5 mobile consoles (workbenches) controlled by CN on the X-axis - N° 5 upper drilling units (B), each consisting of: - 2 vertical 30-spindle heads (60 in total per unit), rotating 0°-90° (X- and Y-axis) - 2 horizontal spindles (4 in total per unit), rotating 0°-90° (X- and Y-axis) Total 300 vertical drilling spindles + Total 20 horizontal drilling spindles (X and Y) - 2 horizontal groups (1 R + 1 L) with 1 head each with 21 spindles (21 + 21 = total 42) E) 2° Roller conveyor "MAHROS" TR-C with 90° motorized belts (from longitudinal to transverse) F) Splitter (Longitudinal sawing-cutting) "CELASCHI" Model SPL Base 2 (for splitting panels in 2) Iedpfxszxc Nce Ahyjih With 3 working units. After cutting, panel width (MIN 70+70 mm; MAX 600+600 mm) G) Stacker (Bridge Frame) "MAHROS", double station Mod. Brush SSL/D (with automatic management system for martyr panels), with "WANDRES" panel cleaner

Condition: excellent (used), Catalog number: 8097 TECHNICAL DATA - spindle diameter: 30mm Iiedpfxozzyrmo Ahysh - spindle working height: 170mm - spindle locking - adjustable spindle (up/down) - original cast iron guide - 5 types of rotational speeds: 3000, 4500, 6000, 8000, 10000 rpm - table dimensions: 730x1190mm - brake - motor: 5.5kW - dust extraction port diameter: 120mm - dimensions (L/W/H): 850x1200x1220mm - weight: 380kg ADVANTAGES - Made in Italy - Brake - Unpainted - Used milling machine, very good condition - Designed for professional use Net price: 10900 PLN Net price: 2535 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)