Used Scm Morbidelli M800 X5 for sale (1,737)

Condition: used, Year of construction: 2012, Integrated NC machining center for windows and doors composed of: A) Automatic loader mod. "SP" Automatic loader for Base SP N. 1 moulder -Automatic loader consisting of: -Table with motorized belts -Automatic device for moving pieces from the buffer to the loading surface of the moulder * Piece length min: 450 mm max: 3200 mm * Piece width min: 40 mm max: 230 mm * Piece thickness min: 40 mm max: 120 mm * Work cycles 10/min * Chain advancement speed on the table: 7 m/min * Loading table dimensions 2800 x 2150 mm B) Automatic moulder mod. SUPERSET NT C 6 Position 1 = Planer Shaft Position 2= 1st right vertical shaft Position 3= 1st left vertical shaft Position 4= 1st upper horizontal shaft Position 5= 1st lower horizontal shaft Position 6= Group for slat recovery 2500 mm entry level Speed 6-36 m/min via inverter No. 1 - engine power 5.5 hp (4 kw) Horizontal presser before the planer with pneumatic exclusion from the panel Pneumatic exclusion from the control panel for the feed unit located before the planer shaft Tandem advance group in front of the right vertical with rapid exclusion Advance groups after the upper ones for reducing the towing distance from 620 mm to 450 mm Input guide with bearings for automatic feeders Electrical predisposition for the use of automatic loaders Manual centralized lubrication Pump for lubrication of the work surface with automatic drive Setup for in-line integration with INTEGRA SYSTEM - work surface raised to 970 mm - traffic light at entrance Podpfxeixxwmo Ak Hegr - piece counting Independent electrical panel POS. 1 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) T-SET quick tool locking -allows tool locking/unlocking with the simple use of a compressed air gun POS. 2 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic vertical positioning POS. 3 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) High precision shaft Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic horizontal positioning POS. 4 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking Electronic vertical positioning POS. 5 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking POS. 6 Glass bead recovery group Comprehends: PRL allows the automatic transition from planing to function recovery of the glazing bead and vice versa. - operating group with shaft diameter 30 mm, length 30 mm - electronic horizontal positioning - electronic vertical positioning - hardware and PLC modifications for axis management - tandem exit and modified hood second advancing group after the universal C) Connection transfer Transfer for receiving pieces from the moulder and automatic insertion into the Sott

Year of construction: 2014, condition: like new (used), "EASY PLUS" electronic control from the control panel 2 axes: - Automatic control of the left spindle vertical and horizontal position of the upper spindle. - Selection of the feed speed. - 7 "color LCD display Min.working width (finished size) 25 mm Working width (finished size) 230 mm Min.working height (finished size) 6 mm Working height (finished size) 120 mm Min. Length of a single element 450 mm Variable feed speed controlled by an inverter 5 - 25 m / min Pneumatic pressure of the feed shafts Top feed shaft in front of the planer 3kW feed motor power 5.5 kW planer motor power Vertical spindle motor power (single) 11kW Pjdsh Nvt Uopfx Ak Hsgr Power of the upper horizontal spindle motor 9kW Spindle speed 6000 rpm. Spindle diameter 40 mm Length of the vertical spindles 140 mm Length of the horizontal spindles 250 mm Axial adjustment of the vertical spindles relative to the 40 mm worktable Axial adjustment of the horizontal spindles in relation to the right ruler of 40 mm Min./max. tool diameter on the planer 120 - 140 mm Min./max. tool diameter on vertical spindles 100 - 180 mm Max. Profile on the vertical spindle 40 mm Min./max. tool diameter on the upper spindle 125 (100-180) mm Feed shaft diameter 140 mm Length of the feeding table 2000 mm Quick adjustment of the table at the entrance and 10 mm ruler Manual pump for greasing the STD table

Condition: excellent (used), Complete factory for the production of furniture cabinets, composed by: KZ2207) “BIESSE” FDT - CN Drilling and Dowels Inserting Line, composed by: Loader "RBO" Tornado, 2 x CN Multi-Borers "BIESSE" FDT, 1 x CN Multi-borer and dowels inserter "BIESSE" SDT CN, Stacker "RBO" Tornado KZ2205) 4-sides Sizing and Edge Banding LINE "HOMAG", composta da Double-station portal Loader "ESSE2", 1st Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/20/QA/15, Turning station at 90° "HOMAG" TD 31/30/12, 2nd Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/21/QA/35, 2nd Turning station at 90° "ESSE2", Double-station portal Stacker "ESSE2" KZ2210) 'BREMA (BIESSE)' Mod. Vektor CNC-LINE for Drilling-Routering-Inserting: Hedgehog (18 positions), CNC Vektor GLR 30-13, Vektor XL 40-30, Idrak-3, various Transfers KZ2090) Sander (Veneer Sanding machine) "COSTA LEVIGATRICE" SN TR TT TT TR 1350 KZ2045) Gantry-CNC with edge banding unit "MORBIDELLI" Planet HP6018 (2 Tables, 6 reels) KZ2033) Edge bander "HOMAG" KAL 310 with Loader-feeder "ESSE2" KZ2075) Furniture assembling LINE "TERMOPAK" with carcasse press (through-feed) KZ2203) Sawing LINE "SALVADOR" (panels cross-cutter + splitter) with Loader "ESSE2" KZ2009) VENEER Department (double-knife guillotine "MONGUZZI", cross-cut shear "MONGUZZI"; splicing machine "KUPER", guillotine shear "TAGLIABUE", ecc) KZ2201) Short-cycle Pressing LINE "WEMHONER" useful size mm 1300x6200 KZ2215) Automatic panels storage System "ESSE2" Mod. MAGAZZINO N° 3 Saw-dust Filtering Stations "MION" (1st of Kw 132, 2nd of Kw 55, 3rd of Kw 22) Various vehicles (truck, van, etc.) Pgjdpfx Ajh T Dvtsk Her And many other machines (i.e. CNC "BIESSE" Skipper 130, small multi-borers "VITAP" and MORBIDELLI", circular saws, etc.), rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: new, Year of construction: 2025, Dimensions and Weights Length approx. 2000 mm Pgedpfjhkz E Tsx Ak Her Width/Depth approx. 1110 mm Weight approx. 430 kg Jointer Feed table length 1034 mm Maximum chip removal 5 mm Dust extraction connection Dust extraction port diameter Thickness 2 x 120 mm Thickness Minimum working height 3 mm Maximum working height 230 mm Maximum chip removal 5 mm Electrical Data Power of drive motor 5 kW Connection voltage 400 V Mains frequency 50 Hz Planer cutterhead Type TERSA Number of planer cutters 4 pcs Speed 5200 min⁻¹ Maximum planing width 410 mm Feed Speed 6 / 12 m/min The TERSA planer cutter system enables particularly quiet operation. Helically toothed steel feed roller for consistent and uniform material feed Material feed with two speeds Numerical display for thickness table height The 2,000 mm long jointer tables facilitate easy adjustment of large workpieces. Work tables are made of gray cast iron, annealed and stress-relieved, making them durable and dimensionally stable Stable, large aluminum jointer fence with round bar guide (1200 x 160 mm) Thickness table adjustment via handwheel with numerical display for planing height The high machine weight ensures maximum precision and smooth operation. Powerful industrial motor Robust steel/gray cast iron construction Equipment details Jointer fence Stable, large aluminum jointer fence (1200 x 160 mm) With precise round bar guide Dust extraction hose connection The dust extraction ports for the jointer and thicknesser point in the same direction during jointing and planing. Therefore, the dust extraction hose can be connected to the machine from the same side for both types of planing. You do not need a hose that runs around the machine. Planing unit Helically toothed steel feed rollers for consistent and uniform material feed Solid anti-kickback devices prevent workpieces from being thrown back 4-cutter shaft ensures an optimal planing result Chain drive Sturdy chain drive Drive gears made of steel Solid gray cast iron bearing block Two feed speeds Standard with two feed speeds Comfortably selectable from the operator panel Material feed Helically toothed steel feed rollers for a consistent and uniform material feed without marks Several teeth engage simultaneously for powerful feed Wear-free compared to rubber feed rollers Thickness table adjustment Adjustment via handwheel Numerical display for the set planing height Accuracy 1/10 mm Tersa planer cutterhead No more adjustment and screwing required Planer cutter change in seconds Self-locking Particularly quiet Perfect planing result Location: In stock, 54634 Bitburg - immediately available - Subject to prior sale

Condition: excellent (used), Year of construction: 2003, I sell the 3-axis CNC working centre SCM SCM RECORD 110, year 2003. Configuration: 3-axis main spindle SCM 6,6kW 24.000 rpm Tool magazine 8 positions ISO30 on working head Useful working area 2690x940 x Z 150mm (300mm). Pgedpjhhruhjfx Ak Hor 2 working fields, 4 clamping areas - Flachtisch Automatic central system of lubrication. Pump BECKER 5,5KW 244/286 m3/h. fast neu. Gewicht 3200kg Xilog Plus new software controller with full instructions ! Very good condition. Available immediately.

Condition: new, Year of construction: 2025, Table saw/router combination minimax twf 55 es M 3 UP Professional machine for skilled tradesmen, featuring motorized height and tilt adjustment of the router spindle, four speeds, and electronic control. Article number 5502266 Brand Holzkraft / SCM FEATURES Features Aluminum sliding table ✔ Handle on the sliding table ✔ Router fence FLEX ONE: heavy-duty professional version, automatic adjustment of the entire router fence depending on the tool diameter, manual adjustment of the chip removal, swing-away mechanism, aluminum fence jaws with connecting strips Spindle height adjustment motorized Telescopic miter fence with two folding stops Spindle tilt adjustment motorized Extension table ✔ Control Ready 3: Programmed movement of the routing unit in two axes, automatic adjustment of the entire router fence depending on the tool diameter, stepless adjustment via switch or automatic positioning system Arc routing guard ✔ Position of the controls Control panel at eye level, swiveling Eccentric clamp TECHNICAL DATA Dimensions and weights Length (product) approx. 1200mm Weight (net) approx. 510kg Pgodpshp Rc Iofx Ak Hor Width/Depth (product) approx. 2000mm Connection for dust extraction Dust extraction port diameter 2 x 120mm Work table Work table length 1200mm Sliding table length 1200mm Work table width 530mm Sliding table width 360mm Table height 900mm Sliding table height 142mm Installation information Space requirement length 2800mm Machine body width/depth 846mm Space requirement width/depth 2910mm Working area length 1600mm Explanation of space requirement The dimensions take into account maximum travel distances or usable lengths. Working area width/depth 2300mm Machine body length 1200mm Explanation of working area Please add the specified dimensions to the space requirement to obtain the recommended clear installation area for the machine. Electrical data Connection voltage 400V Power of drive motor 5.0kW Mains frequency 50Hz Router spindle Spindle tilt 0 to -45° Router spindle speed display Display on the control panel Usable spindle length 125mm Spindle arbor diameter 30mm Spindle speed(s) 3500/6000/8000/10000 min¯¹ Router tool diameter max. Tool diameter max. 240mm Tool diameter max. for profile routing 240mm Tool diameter max. for plunge routing 230mm

Condition: new, Ideal for demanding craftsmen and carpentersThe particularly long dressing tables made of one piece enable easy dressing of the workpiecesWork tables are made of gray cast iron, making them robust and permanently flatRear-opening dressing tables with tension spring support for quick and easy retoolingThanks to the fixed extraction hood, it is not necessary to reposition the extraction hose during retooling, This saves valuable working timeHelically toothed steel infeed roller ensures constant and even wood infeedRubber outfeed roller in the thickness run-out ensures even wood outfeedMaterial feed with four speedsPlane thicknessing table adjustment via handwheel with integrated display for the planing heightDIGITAL: with electric thicknessing table height adjustment and digital displayOn/off switch in operator positionPowerful industrial motorThe high machine weight ensures maximum precision and smooth paration for slot drilling deviceQuality Made in ItalyTECHNICAL DATADimensions and weightsLength (product) approx. 2250 mm Width/depth (product) approx. 1370 mmWeight (net) approx. 695 kgJointerTotal length of tables 2250 mmChip removal max. Dressing 5 mmDressing fence length 1200 mmDressing fence height 150 mmSuction connectionSuction nozzle diameter thickness 1 x 120 mmInstallation informationSpace requirement length 2250 mmSpace requirement width/depth 1440 mmExplanation of space requirement: The dimensions take into account maximum travel distances or effective cknessThicknessing table length 520 mmThicknessing table width 850 mmWorking height thickness min. 3 mmWorking height thickness max. 240 mmWorking length thickness min. 220 mmChip removal max. thickness 5 mmElectrical dataDrive motor power 7 kWSupply voltage 400 VMains frequency 50 HzPlaner cutterheadPlaner shaft type TERSAPlaner shaft diameter 120 mmNumber of planer knives 4 pcsPlaner shaft speed 5000 min¯¹Planer width max. 520 mmFeedFeed speed 5/8/12/18 m/minSCOPE OF DELIVERYJointer-jointer fence with round bar guide4 feed speedsTersa planer shaftManufacturer no.5503501 Psdjvwflbspfx Ak Hegr

Condition: new, - New -Description:- Top equipment for high productivity in a small space!- Intuitive operation with the eye-S control and 10"large touch screen: HMI Maestro Active Edge,Graphic display of all machining units and theiroperating status, Graphic simulation of machining operations,Control of all machining units, Regulationof glue tank temperature, Assistance functionsfor setting up the machine according to the machining program,Fault diagnosis for quick elimination of simple errors,Statistics on machining parameters, USB connection,Preparation for network connection, Preparation for Industry 4.0with data transmission protocol API REST- Excellent accessibility to the working aggregatesthanks to the large hood that ensures protection and noise reduction- Monoblock construction made of steel ensures high stabilityand rigidity of the machine- Automatic aggregate positioning when changingthe panel thickness- Automatic application of the strip edges with edge magazine(me 35 t s): The strip edges of solid wood areautomatically loaded and synchronized with the panel guide- Panel feed is made by feed chain with rubber glides- Extendable workpiece support- Adjustment of the infeed ruler via spacer platesTechnical data:Dimensions and weightsLength approx. 3314 mmHeight approx. 1300 mmWidth/depth approx. 1085 mmWeight approx. 545 kgflush radius milling unitflush radius milling unit input power 2 x 0,35 kWflush radius milling unit cutter speed 12000 min¯¹flush radius milling unit cutter diameter HM 55.3 mmFlush radius milling unit suction port diameter 2 x 60 mmElectrical dataSupply voltage 400 VMains frequency 50 HzGlue unitGlue tank input power 0,25 kWGlue tank suction port diameter 60 mmGlue tank working temperature 190 °CGlue tank filling quantity 0.8 kgPneumatic connectionOperating pressure 6.5 barAir consumption 470 l/minFeed rateFeed input power 5 kWFeed speed 7 m/minEdgesEdge thickness roll material 0.4 - 3.0 mmEdge thickness strip material - 5.0 mmPre-milling unitPre-milling unit input power 3 kWPre-milling unit diamond cutter diameter 80 mmPre-milling unit material removal ,5 / 2 mmpre-milling unit cutter speed 7200 min¯¹pre-milling unit cutter height 56 mmpre-milling unit exhaust diameter 2 x 80 mmscraper unitradius scraper 2 mmbuffing unitbuffing unit input power 2 x 0,14 kWbuffing unit speed 2800 min¯¹workpieceworkpiece thickness 8 - 50 mmworkpiece width min. 110 mmWorkpiece length min. 120 . 5507235 Pjdpfxsvwfmlo Ak Hegr

Condition: new, - NEW -- With TERSA cutter block for secondsChange planer knives- TERSA planing knife system enables particularlyquiet running- Helical-toothed steel feed roller forconstant and even wood intake- The particularly long planing tables from onePiece allow easy dressing of theWork pieces- Large planing fence can open when openingthe planing tables remain in position- Planing tables that open to the rear- The high machine weight ensures the highestPrecision and smooth running- Powerful industrial engine- Robust steel / cast iron construction- work tables are made of gray cast iron,post-annealed and stress-free, therebyinsensitive and permanently flat- Table lips for quiet runningEquipment detailsTERSA planing knife shaft- No more adjusting and screwing- Blade change in seconds- Self-locking- Particularly quiet- Perfect planing resultSuction hose connection- The suction nozzle of the planer and thicknesspoint in the same direction.- The hose connection is made by just oneSide off.- No hose is needed aroundthe machine passes ve- Stable chain drive- Steel drive wheels- Solid cast iron bearing blockPlaning mill- Prevent massive kickback protectionthe kickback of workpieces- TERSA planing knife shaft with three knivesensures an optimal planing patternThe material feed- Helical steel feed rollers for oneconstant and even material intakewithout prints- Multiple teeth grip at the same time for powerfulFeed- Wear-free in contrast to rubber feedrollingTechnical specifications:Length approx. 1725 mmWidth / depth approx. 880 mmWeight approx. 270 kgDressing chip removal max. 4 mmExtraction nozzle thickness 2 x 120 mmThick working height min. 3 mmThick working height max. 230 mmThickness of the chip removal max. 4 mmDrive motor power 4 kWConnection voltage 400 VMains frequency 50 HzPlaner knife shaft type TERSANumber of planing knives 3 pcsSpeed ??5200 min¯¹Planing width max. 300 mmFeed speed 7 m / minItem No. 5503031Storage location 97447 Gerolzhofen- free loaded- Psdpfxsvwgaao Ak Hjgr

Condition: good (used), Year of construction: 2000, machine/vehicle number: R.0017.01, functionality: fully functional, overall weight: 3,800 kg, - documentation is supplied with the machine Podpfxex Hf T Ao Ak Hogr

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 M A With tilting saw blade and sliding table made of anodized aluminium Item number: 5504933 Brand: Holzkraft TECHNICAL DATA Dimensions and Weights Weight (net): approx. 690 kg Dust Extraction Extraction port diameter: 120 mm Saw blade guard extraction port diameter: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Output power (main motor): 7.0 kW Rated duty cycle (main drive): S6 Duty cycle (main drive): 40% Sliding Table and Worktable Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of blade: 3200 mm Edging length: 3200 mm Saw blade tilting range: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note max. cutting height: independent of scorer Podpexw N N Hjfx Ak Hjgr Saw blade diameter: 400 mm Note saw blade diameter: independent of scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm EQUIPMENT Scoring unit with separate scoring motor Anodised aluminium sliding table Handle for sliding table On/off switch on sliding table for main and scoring blade motors Edging frame Material roller on edging frame Rip fence with round bar guidance Stops: two professional folding stops Edging shoe Excenter clamp Table extension Table width extension Pendulum-type saw blade guard Motorised height adjustment and tilt of saw unit, digital tilt angle display Location: ex stock 54634 Bitburg - immediately available -

Condition: used, total width: 1,000 mm, total height: 1,600 mm, Colour: Grey Empty weight: 1.300 kg Dimensions (LxBxH): 340 x 100 x 160 cm Four-sided planer SCM Sintex 380V 4 spindles Pedpfx Aksyw Sg De Hsgr Spindle below / above 7.5kW Spindle left/right 7.5kW Max working height 105mm Max working width 180mm Input table 2300mm Spindle diameter 40mm Total dimensions 3400x980x1600mm (LxWxH), weight 925kg - Documentation available: No - CE certificate present: No - Number of spindles [pcs.]: 4 - Min. planing height [mm]: 100 - Feed table length [mm]: 2300 - Feed roller diameter [mm]: 120 - Feed motor [kW]: 7.5 - Diameter extraction nozzle [mm]: 120 - Voltage [V]: 380 - Transport dimensions: 3400mm x 1000mm x 1600mm (l x w x h) - Transport weight [kg]: 1300kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: A1/000022, functionality: fully functional, travel distance X-axis: 4,950 mm, travel distance Y-axis: 2,050 mm, travel distance Z-axis: 1,000 mm, number of slots in tool magazine: 12, rotational speed (max.): 24,000 rpm, TECHNICAL DETAILS Travel X-axis: 4,950 mm Travel Y-axis: 2,050 mm Travel Z-axis: 1,000 mm Working area X-axis: 4,250 mm Working area Y-axis: 1,560 mm Working area Z-axis: 800 mm Spindle speed range: 900 - 24,000 rpm Pgedsyznc Aepfx Ak Hjr Vertical spindles: 5 Horizontal spindles: 4 Center distance between spindles: 32 mm Tool changer positions: 12 Max. tool diameter with 12 tools: 80 mm Max. tool diameter with 8 tools: 160 mm Max. tool diameter: 250 mm Max. tool weight: 4 kg Max. weight on magazine: 24 kg MACHINE DETAILS Control software: OSAI Motor power: 12 kW EQUIPMENT Multifunctional nesting worktable FT Automatic tool change Safety and protection cells Comprehensive safety enclosure Automatic lubrication system Control cabinet climate system HSK-F 63 tool holders External reference: MIG010

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) It is 2nd DET in the X10023 LINE Electronic Programmer OMRON Safety and sound-proof enclosure Electric and command cabinet No. 3+3 Vertical columns to support the working units Pgodoyz Si Hspfx Ak Hsr As a second machine, it accepts panels 1900 mm deep Min. useful working width (mm) 300 Max. useful working width (mm) 2500 Min. useful working thickness (mm) 6 (ca.) Max. useful working thickness (mm) 60 Distance between center-axes of the disappearing dogs (mm) 400 Adjustable (min/max) feeding speed (m/min) 4-24 Total installed power Kw 65 No. 3 Working groups (for each machine's side): - 1 Jumping vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) - 1 Standard vertical NC Milling Unit (useful height 500 mm ca.), belt drive motor (9.2 kW at 3000 rpm) - 1 Jumping vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) NOTE: These 3 main vertical Milling units are NC controlled, with horizontal and vertical adjustment - 1 Free space

Condition: ready for operation (used), working width 230mm working height 120mm 4 spindles two axes spindles regulation spindles diameter 40mm Pgedpfx Ajyxlrpek Her dimensions adjusted from panel spindles delta/star start two feeding speed table lubrication year 1998

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Year of manufacture: 2013 Milling head Working area X: 3000 Working area Y: 900 Working area Z: 50 Separate units: 1 Vertical drill: 12 Horizontal drill X: 4 Horizontal drill Y: 2 Grooving saw: Yes Stationary machine: Yes Clamping system: Clamps Safety: Light barrier Control and software Podpfx Akjw Npyqe Hegr SCM XILOG Minimum footprint: 3920x1170x2150

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, DAILY WORKING IN THE PRODUCTION max 2-3 hours , MACHINE WILL BE REPLACED WITH BIGGER NEW MACHINE Pgodpfxoym Sgue Ak Hor MACHINE IS AVAILABLE IMMEDIATELY. TECHNICAL DATA IS PRESENT ON PHOTOS WORKING STATIONS: TECHNICAL DATA: 1. Left+right cutter 2. Roller glue application 3. Front and rear saw 4. Straight cutter also for solid laminates 5. ⁠Angle cutter 6. ⁠Rondomat front, rear, top, bottom 7. ⁠Straight wedge cutter 8. ⁠Wedge cutter with radius 9. ⁠ Dryer WE SHIP MACHINE WORLD WIDE FOR THE CUSTOMERS MACHINE LENGHT APPROX 7 METERS WEIGHT : 3500 KG

Condition: used, Year of construction: 1999, functionality: fully functional, Well-maintained and refurbished SCM edgebander type K208 TERL available in our warehouse. The machine is in very good condition and fully equipped, including: DIA pre-milling cutters Pair of end trimming units Pair of rough straight milling cutters Pair of fine tilting milling cutters Pgodpoylxxnefx Ak Hjr Rondomat with 2 motors Radius scrapers Brushes The machine has been carefully maintained and is ready for operation. Price: €8,900 + VAT

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: AE/020112, total width: 1,300 mm, overall weight: 2,750 kg, number of rollers: 4, No reserve price – guaranteed sale to the highest bidder! MACHINE DETAILS Pgjdpfxjxmhiws Ak Her Overall width: 1,300 mm Electrical data Rated voltage: 400 V Frequency: 50 Hz Phases: 3 ~ Rated current: 180 A Short-circuit current: 10 kA Max. load current: 420 A Weight: 2,750 kg EQUIPMENT Two rollers at the top Two rollers at the bottom Note: The machine was dismantled as part of a liquidation and is loaded onto a truck. The machine was fully operational at the time of dismantling.

Condition: excellent (used), Year of construction: 2006, track width: 300 mm cutting height: 120 mm max. disc diameter: 350 mm motor power: 30 kW table width: 750 mm feed adjustable via frequency inverter Pgsdpfx Ajwxrrvok Hor fence adjustable pneumatically

Condition: used, SCM Sandya LS1 R110 calibrating machine with 1100 mm roller and brush. Approximate power consumption: 13 kW. Used. 11 kw roller Podeuk Hi Repfx Ak Hogr 2.2 kW brush Carpet 0.75 kw

Condition: new, Year of construction: 2025, Motorized planer table with two speeds Digital display for work height Planer table made of gray cast iron The planer table is supported on four large trapezoidal thread spindles for maximum stability and precision Four feed speeds Optional with two rollers in the planer table Standard with noise and chip protection curtain at the workpiece infeed and outfeed Roller pressure adjustable Front infeed roller with helical teeth Outfeed roller with rubber coating Powerful industrial motor Equipment details TERSA models with Tersa planing cutter shaft Planing cutter change in seconds When the machine starts, the planing cutters are automatically tensioned by centrifugal force - self-locking The cutter overhang adjusts automatically without the use of setting gauges Work table The work table is supported on four large trapezoidal thread spindles, which ensure maximum stability under all working conditions Standard with electric table adjustment Due to the special lifting device, the table position is maintained perfectly even without locking Helically toothed steel infeed rollers for a constant and uniform wood feed Second, rubber-coated feed roller at the outfeed Solid anti-kickback devices prevent workpiece kickback A 4-cutter shaft ensures an optimal planing result Dimensions and weights Length approx. 1305 mm Width/Depth approx. 1080 mm Weight approx. 750 kg Dust extraction connection Suction nozzle diameter, thickness 150 mm Drive power Main motor 9 kW Installation information Space requirement, length 1305 mm Space requirement, width/depth 1080 mm Space requirement, height 1197 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Machine body length 1305 mm Machine body width/depth 725 mm Length 1000 mm Width 2000 mm Explanation of work area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thickness Planer table length 630 mm Planer table width 1000 mm Work height min. 3.5 mm Work height max. 300 mm Pgjdpfeff Efasx Ak Her Work length min. 210 mm Chip removal max. 8 mm Electrical data Connection voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Planing cutter shaft Type TERSA Diameter 120 mm Number of planing cutters 4 pcs Speed 4500 min⁻¹ Planing width max. 630 mm Feed Speed 5/8/12/18 m/min Location: In stock, 54634 Bitburg - immediately available -

Condition: excellent (used), Track width: 300 mm Minimum length of workpiece: 390 mm Pgodpowndqisfx Ak Her Minimum width of workpiece: 12 mm Minimum height of workpiece: 8 mm Maximum width of workpiece: 950 mm Saw blade diameter: 350 mm Blade bore diameter: 70 mm Spindle speed: 4200 RPM Main motor power: 35 HP (approx. 25.7 kW) Variable feed speed: 6–48 m/min Table dimensions: 1530 × 1100 mm Machine weight: 1800 kg Year of manufacture: 2008 Certification: CE

Condition: excellent (used), Year of construction: 1997, Very well-maintained 4-sided planer, with low usage. Maximum working width: 230 mm Maximum working height: 120 mm Podpfjzlk U Hsx Ak Hsgr Spindle motor power: U: 5.5 kW L and R: 7.5 kW O: 5.5 kW Equipped with Tersa planing heads.

Condition: used, SCM jointer, Italian made 4 traditional knives, wedge-clamped Psdjy Ifglopfx Ak Hegr Table combs Width: 410 mm Table length: 2600 mm Angled, adjustable fence Brake Well-maintained machine, quiet operation