Used Schering Dyna-Plus for sale (5,046)

Condition: new, Year of construction: 2026, _____Standard Equipment / Technical Data Engine Rated Power (ISO) 68 / 90 kW / hp at 2200 rpm Max. Power 71 / 95 kW / hp at 2000 rpm Max. Torque 405 Nm at 1500 rpm Manufacturer / Type: Agco Power / AP 44MBTN-D5 Low-emission engine, 4 cylinders / 4.4l, 4V, STAGE 5 Controlled Turbocharger, SCR - Catalyst DOC - Diesel Oxidation Catalyst SCR Particulate Filter Catalyst Hood - single-piece, foldable Exhaust pipe on the right side in front of the cab Fuel tank capacity 198 liters / AdBlue 18 liters Transmission / PTO 16/16-speed Dyna-4, SpeedMatching, 40 km/h PowerControl operation on the left with load-sensing reversing gearbox, clutch operation, 4-stage load shifting with 1 lever, T-shuttle lever in the side console Partially automatic group shifting and Autotronic monitoring Permanently cooled wet disc clutches with independent lubrication system PTO: 540 / 540E / 1000, stub shaft 1 3/8", 6-spline Electrical engagement in the cab PTO START/STOP button on the rear, left fender Hydraulics / Lifting System Open Center system Quick coupler Cat. 2 Upper link control 4,300 daN maximum lifting force, 2 external lifting cylinders Adjustable lifting struts on both sides EHR with external control on both fenders Quick adjustable automatic drawbar coupling Electrical system Thermostart, 120 A alternator Power supply (12 Volt) for external devices with connector Axles / Additional Weights All-wheel drive front axle with switchable differential lock Rear axle ND with flange hub Cjdpfxjzpcvdj Ai Noha Oil-cooled disc brakes Front fender, width adjusted, rotatable Rear fender width 1.80 m, without extensions Front weight carrier with integrated drawbar and drawbar pin Driver's Seat Vibration-damped standard cab with standard roof, ventilation and heating Integrated safety frame with tinted glazing Doors on both sides with safety steps Steering column adjustable in height and inclination Air-suspended driver's seat with armrests, swivel adapter, safety belt Exterior & wide-angle mirrors Interior mirror Analog-digital instrument panel (SIS) Radio preparation with antenna and speakers 4 work lights front and rear on the cab roof 2 driving lights in the hood and on the handrails, 2 work lights on the rear fenders Special Equipment: Fuel tank protection PowerControl & Brake on Neutral (clutch effect) 100 l/min, Open Center hydraulic system oil flow coupling (58+42 l/min) Front loader quick coupling system Leak oil collector on quick couplers 3 control valves: 1x MR, dw, EA, SST + 1x dw, NL, SST + 1x dw, NL, SST + free return 2.5t front lift, 1 hydraulic line set, electrical socket MF front loader preparation: foundation set, hydraulic set, electrical control via joystick, PTO: 540/540E, flanged, 6-spline, internal engagement Rear fender extensions - 100mm Tires 480/70R38 & 380/70R28 Air conditioning Cab with mechanical suspension Telescopic exterior & wide-angle mirrors Passenger seat with belt Air-suspended driver's seat, automatic adjustment with safety belt, swivel adapter and armrests Rear window wiper / washer system Without MF Connect (MF Telemetry System)

Condition: used, Year of construction: 2023, operating hours: 448 h, power: 186 kW (252.89 HP), maximum speed: 50 km/h, front tire size: 600/70 R30 | 0%, rear tire size: 710/70 R42 | 0%, tire size: 710/70 R42, number of beds: 43, Tires (front): 600/70 R30, Tires (rear): 710/70 R42, Operating hours: 448, First registration: 12/17/2024_____Price: 175,900.00 Euro net Standard equipment/technical data: Chsdpfxevv Dp Ns Ai Nja ENGINE: Max. power 180/245 kW/hp (ISO 14396), Max. torque 1100 Nm, Maximum power with power management 194/265 kW/hp, Max. torque with power management 1178 Nm, 6 cylinders, 7.4l AGCO Power - 74 LFNT-5D, CR, 4V, Emission standard (DOC+SC+SCR) without exhaust gas recirculation, Stage 5, Electronic engine control with Vistronic fan control, Engine speed memory, Powercore engine air filter with coarse dirt pre-filter, EasyCare radiator package, Additional fuel pre-filter with water separator, 500-liter fuel tank.

Condition: used, Year of construction: 2023, operating hours: 307 h, maximum speed: 50 km/h, front tire size: 540/65 R28 | 0%, rear tire size: 650/65 R38 | 0%, tire size: 650/65 R38, number of beds: 35, Tire size (front): 540/65 R28, Tire size (rear): 650/65 R38, Operating hours: 307, First registration: 19.12.2024_____First registration: 19.12.2024, Operating hours: approx. 350 h, Standard equipment/technical data: ENGINE, Maximum power 121/165 kW/hp (ISO 14396), Maximum power with power management 136/185 kW/hp, Maximum torque 790 Nm, with power management 800 Nm, Registered power 134 kW (ISO 14396), Maximum power at the PTO 103/140 kW/hp (OECD), 4 cylinders, 4.9l AGCO Power - 49 LFNT-D5, Exhaust aftertreatment with DOC - Diesel oxidation catalyst, SCR 3rd generation & Diesel particulate catalyst, Emission standard: Stage 5, Electronic engine control with Vistronic fan control, Engine speed memory, Powercore engine air filter with coarse dirt extraction, EasyCare cooler package, 280 liter fuel tank. Chodew A Hgpjpfx Ai Nja

Condition: used, Year of construction: 2023, operating hours: 950 h, power: 224 kW (304.55 HP), maximum speed: 50 km/h, front tire size: 600/70 R30 | 0%, rear tire size: 710/70 R42 | 0%, tire size: 710/70 R42, number of beds: 43, Tire size (front): 600/70 R30, tire size (rear): 710/70 R42, operating hours: 950, initial registration: 12/19/2024. Price: 199,000.00 euros net. Initial registration: 12/19/2024. Operating hours: approx. 850. Standard equipment/technical data: ENGINE: Max. power 224/305 kW/HP (ISO 14396), max. torque 1280 Nm, 6 cylinders, 7.4l AGCO Power - 74 LFNT-5D, CR, 4V, emission standard (DOC+SC+SCR) without exhaust gas recirculation, Stage 5, electronic engine control with Vistronic fan control, engine speed memory, Powercore engine air filter with coarse dirt extraction, EasyCare radiator package, additional fuel pre-filter with water separator, 500-liter fuel tank. Chsdpow E N Tdefx Ai Noa

Condition: used, mileage: 45,969 km, power: 103 kW (140.04 HP), first registration: 09/2020, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 11/2026, color: blue, gearing type: mechanical, emission class: euro6, number of seats: 6, Year of construction: 2020, Equipment: ABS, central locking, electronic stability program (ESP), parking heater, soot filter, Equipment: * Body/Superstructure: Panel van, double cab L2H1, * Auxiliary heater with remote control, * Passenger-side double seat with storage/compartment, * Seats in the cargo area: 1st row, 3-seater bench, * Storage Package 2, * Rear hinged doors, 270 degrees with glazing, * Rear step on the right-hand side, * Rear glazing tinted, * Cargo area partition behind the 2nd row of seats, * Sliding door on the right-hand side with intermediate locking, * Tow hitch, 3,000 kg, Technology: * Audio system Composition Audio, * SD card, MP3, Bluetools, * 2nd battery, * Marker lights on the side, * Multi-function display Plus, Chodpfx Aiezpcn Ts Noa Safety/Environment: * Airbag, driver's side, * Driver assistance system: Hill start assist, * Driver assistance system: Crosswind assist, * Low emissions according to Euro 6d-TEMP emission standard, * Start/Stop system for the engine, Other: * 1 previous owner, * Originally delivered in Germany, * Truck registration, * Engine 2.0 L - 103 kW TDI, * Wheelbase 3640 mm, * Permissible total weight 3.50 t, Please note: This VW does NOT have air conditioning! Since 1972, we have been your reliable partner for everything related to automobiles/commercial vehicles in 28832 Achim, near the Bremen interchange. Behnke Commercial Vehicle Center always has approximately 200 vehicles in stock from the areas of vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options at favorable special conditions. If you are interested, we will gladly prepare an individual offer for you! We would be happy to accept your commercial vehicle/construction machinery in part exchange. If you would like a new TÜV (German technical inspection) inspection, we will gladly provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection. The delivery of your "new" commercial vehicle is possible through our external partners for an additional cost. The information provided in advertisements, on the internet, price tags, and in images is non-binding and does not constitute guaranteed characteristics. The seller assumes no liability/warranty for typographical and data transmission errors. Listed equipment may need to be checked separately. Errors and prior sale are reserved.

Condition: ready for operation (used), 1 x stitching unit - 380 2 x stitching heads HK75Q 1 x remote control jogger inch 1 x oblique sheet saddle monitor 6 x section feeders 370 1 x cover folder feeder 1529 1 x three knife trimmer 449 1 x stacker delivery - Perfetto 450   Optional if needed; Centre cut for double production Codpfoxxnlpex Ai Neha small size attachment for feeders additional stitching heads 

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, CNC Machining Centre CHIRON FZ 08K S Magnum High Speed Plus (HSP) TECHNICAL CHARACTERISTICS: Year of manufacturing: 2007 CNC control: FANUC 18i-MB5 Number of axes: 7 Stroke X axis: 450 [mm] Stroke Y axis: 270 [mm] Stroke Z axis: 310 [mm] Traversing feeds X, Y and Z axes: 75000 [mm/min] Max. bar diameter in turning spindle: 32 [mm] Angular A axis stroke: 360 [°] A axis indexing precision: 0.001 [°] B axis swivelling stroke: -20° / +115 [°] B axis indexing precision: 0.001 [°] Spindle type: HSK40 Max. spindle speed: 30000 [rpm] Tool changer magazin number of stations: 40 Total power required: 17 [kVA] Supply voltage: 400 [V] Dimensions: 1500 x 2600 x 2300 [mm] Weight: 3400 [Kg] INCLUDED EQUIPMENT: x1 RENISHAW tool probe, type TS27R x1 spindle cooling unit x1 coolant tank x1 unit for 6th-face machining x1 SCHUNK clamping vice x84 tool holders - type HSK40 Csdpfx Asyq Nyyji Njha x14 collets - type F35 x1 electrical cabinet air conditioning unit x1 DONALDSON mist extraction unit - type Torit DCE x1 washing gun x1 three-color status light x1 MACHINING INSTRUCTIONS manual x1 operator manual x1 programming manual Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machines similar to Mikron, Hermle, DMG MORI, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, and Alzmetall, as well as CNC milling, drilling, and tapping machines, and CNC grinding machines

Condition: used, Pilous ARG 235 Plus Horizontal Bandsaw, Includes 4500mm x 800mm Infeed Roller Conveyor and 1300mm x 800mm Outfeed Conveyor. S/No. 123/19/0043. Country of Origin: Czech Republic Please Note: Collection from 6th – 20th October 2026, Site will be closed from 10th September – 5th October 2026 Codpfx Aiszn Uwds Nsha Location: These lots are located in Cardiff, Wales, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 60 t, bale weight: 550 kg, Equipment: documentation/manual, Used HSM V-Press 1160 Plus vertical press from 2015. The device is regularly serviced by an authorized service center. The press is fully functional and in very good technical and technical condition. Crushing force: 594 kN Voltage / required: 400 V / 50 Hz Width x height of the loading opening: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Width x height x height of the machine: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Pressed material: foil, mixed paper, cardboard, cutting machine waste Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices - excluding VAT. Opening hours Chodpfx Aiszn Hl To Nsa Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: like new (used), Year of construction: 2018, functionality: fully functional, pressing force: 60 t, bale weight: 550 kg, overall weight: 2,450 kg, HSM V-Press 1160 Plus vertical baler from 2018 with a very small number of hours worked (99 operating hours) and number of bale cycles worked (55) - almost new condition. The device is regularly serviced by an authorized service center. The press is fully functional and in very good technical and technical condition. Crushing force: 594 kN Voltage / required: 400 V / 50 Hz Width x height of the loading opening: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Codpfxozn Hltj Ai Nsha Width x height x height of the machine: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Pressed material: foil, mixed paper, cardboard, cutting machine waste Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: good (used), Year of construction: 2006, operating hours: 9,911 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, Equipment: documentation/manual, CNC machining center CHIRON FZ08 KS Magnum High Speed Plus (HSP) TECHNICAL CHARACTERISTICS: Year of manufacturing: 2006 CNC control : FANUC 18i-MB5 Number of axes : 7 Stroke X axis : 450 [mm] Stroke Y axis : 270 [mm] Stroke Z axis : 310 [mm] Traversing feeds X, Y and Z axes : 75000 [mm/min] Max. bar diameter in turning spindle : 32 [mm] Main spindle max. speed : 8000 [rpm] Main spindle max. power : 12 [kW] Angular A axis stroke : 360 [°] A axis indexing precision : 0.001 [°] B axis swivelling stroke : -20° / +115 [°] B axis indexing precision : 0.001 [°] Spindle type : HSK40 Max. spindle speed : 30000 [rpm] Tool changer magazin number of stations : 40 Part turnaround by robot (6th side machining) : Yes RS232 Interface : Yes Total power required : 17 [kVA] Supply voltage : 400 [V] Number of running hours : 9911 [h] Dimensions : 1500 x 2600 x 2300 [mm] Weight : 3400 [Kg] EQUIPMENT INCLUDED: Csdox Iiw Iopfx Ai Neha x1 RENISHAW TS27R tool probe x1 spindle cooling unit x1 parts catcher x1 coolant tank x1 unit for 6th face machining (gripping system not included) x29 tool holders type HSK40 BIG KAISER x10 collets type F37 SCHAUBLIN x1 washing gun x1 3-color status light x1 maintenance manual x1 electrical diagrams manual x1 operator's manual x1 programming manual Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed Machine similar to brands such as Okamoto, ELB, GER, Tacchella, Karstens, Jones & Shipman, Jung, Favretto, Blohm. Internal and external grinding (ID/OD) also to be considered. Surface grinder, lathe, machining center, milling machine.

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: VD004489, power: 45 kW (61.18 HP), operating pressure: 10 bar, type of cooling: air, Equipment: compressed air system, compressor, type plate available, The Hertz Frecon Plus 45 compressor is a high-performance industrial unit designed to meet demanding compressed air requirements. This used model offers a power output of 45 kW and operates at a maximum pressure of 10 bar, making it ideal for various industrial environments requiring a reliable compressed air supply. Cjdpfx Aiozlxq Ao Nsha This oil-lubricated compressor is known for its robustness and efficiency, ensuring a long service life and minimal maintenance. The Frecon Plus series from Hertz was designed to optimize energy performance while reducing operating costs. This makes it not only economical in the long term but also environmentally friendly thanks to its energy efficiency. Overall, the Hertz Frecon Plus 45 is a reliable choice for those seeking a used compressor capable of delivering consistent power and efficiency. Its robust design and operational capabilities make it a valuable asset for any industrial facility requiring a high-performance compressed air solution.

Condition: new, Number of boring motors 1 St. boring of corner bearing 1=yes, 0=no 1 ja boring of olive 1=yes, 0=no 1 ja Götzinger Olive drilling machine type OBM-PLUS (corner and scissor bearing + handle olive drilling) Pos. 1 ----- Vertical drilling unit with drill head quick-change device Pneumatic feed via foot valve 1 adjustable back stop 2 swiveling workpiece supports 1 machine stand complete with shelf 220/400V, 50Hz, 1.1KW Pos. 2 ----- Drill head BKF 3, 21.5 mm pitch, quick-changeable Drill holder M 10, cyl. right/left complete with stop system 2200 mm long Total length with 10 folding stops adjusted to constant Grip size (olive drilling) Pos. 3 ----- 1 set of drills (for handle olives) consisting of: 2 dowel drills d = 10 left 1 artificial drill d = 25 (or according to your choice or manufacturer fittings) Pos. 4 ----- Drill head BKF 2/3 can be changed quickly 2/3 spindles for corner bearings drill on the loose frame part (Sigenia, Maco, Roto, Winkhaus, GU) complete with stop system with 2 folding stops Pos. 5 ----- Drill 2 cylinder head drills for corner bearings ----- Basic price in the above version Pos.1 - Pos.5 on request! ----- Special accessories with additional charge: -Folding stop per piece, EUR 110,00/piece -Stop system for central drilling, EUR 1,980.00 -chassis, EUR 920.00 -Roller conveyor right/left 1.5 m, 200 mm wide complete with 4 rollers each, EUR 1,940.00 -Conversion kit for PVC with steel insert Oil brake cylinder for uniform feed speed PVC support to prevent the profile from tipping over Reduction gear for low speed, EUR 1,790.00 -Drill set for PVC with steel insert, EUR 420.00 2 step drills d = 12 mm left 1 piece step drill d = 12 mm right -2 pieces of additional stops for the stop in the tilt window, EUR 180.00 -2 pieces of additional pneumatic stops for gripping the entire fighter groove, EUR 1,650.00 -2 pieces of additional pneumatic stops for gripping the dowel hole in the Fighter area complete, EUR 1,650.00 -4 additional pneumatic double stops for gripping the dowel hole in the fighter area complete, EUR 1,980.00 Chodoygm Tcepfx Ai Nja PS: If the dowel hole is in the middle, 1 stop on the right/left is sufficient. If the dowel hole is off center, you need 2 stops on the right/left. -Packaging 1 box Packaging 1 pallet with foil, on request ----- We will be happy to send you the price list with all options upon request. (Technical information according to manufacturer - no guarantee!)

Condition: ready for operation (used), Year of construction: 2019, HANDTMANN VF608 PLUS filling machine for sale. Chedpfx Aoznvhqsi Nsa Please let me know if you are interested.

Condition: new, Year of construction: 2026, Cabinet Sandblasting Machine KDP350TOP PLUS is an advanced technological device designed for precise abrasive blasting operations. Its construction has been developed for demanding users in the industrial, automotive, metalworking, and restoration sectors. Thanks to the top-opening chamber and side openings for long components, this model enables efficient cleaning and surface finishing of profiles, frames, and parts with unusual dimensions. It is an ideal sandblasting cabinet for wheels, metal components, and machine parts. Main advantages of the machine Large 330-liter working chamber – allows processing of medium and large components. Top-opening chamber – simplifies loading of elements with non-standard shapes or lengths. Side openings – provide convenient access and comfortable operation with longer parts. Chsdpfx Asm Ncciei Noa Dust-free operation system with two dust extraction connections and sealed gaskets. DC15 cyclone dust extractor included – effectively removes contaminants from the working chamber. Efficient operating pressure range of 4–8 bar and air consumption of 400–700 l/min – ensure effective blasting performance. Blasting gun with ceramic nozzles – high wear resistance and compatibility with various abrasive materials. Construction and technology The KDP350TOP PLUS cabinet sandblasting machine features a robust construction made of thick steel sheet, powder-coated for increased corrosion resistance. The upper door is equipped with telescopic cylinders, making it easier to open even when handling heavier components. The tightness of the cabinet is ensured by rubber perimeter seals, preventing dust and abrasive material from escaping outside the working area. The bottom abrasive discharge system allows quick and convenient replacement of blasting media. Precision and work efficiency Thanks to the wide operating pressure range and the ability to use various abrasive materials, the CORMAK KDP350TOP PLUS sandblasting cabinet provides uniform and precise cleaning of metal surfaces. The large viewing area of 580 × 270 mm and integrated workspace lighting enable accurate control of the blasting process, even when working with complex-shaped components. It is an excellent solution for workshops requiring repeatable and professional surface treatment results. Standard equipment DC15 cyclone dust extraction system Foot pedal for airflow control Working area lighting – 12V fluorescent lamp with 230V power supply 2 integrated, wear-resistant rubber working gloves 2 dust extraction connections: Ø63 mm and Ø90 mm Sandblasting gun with 8 replaceable ceramic nozzles 4 protective visor films Front door with rubber seals User manual in Polish Technical specifications – KDP350TOP PLUS cabinet sandblasting machine Parameter Specification Working capacity 330 L (0.33 m³) Operating pressure 4–8 bar Air consumption 400–700 l/min Air connection 1/4" quick connector Viewing window area 580 × 270 mm Side opening dimensions 200 × 180 mm Dust extraction connections Ø63 mm and Ø90 mm Internal cabinet dimensions (W × D × H min/max) 890 × 655 × 360/610 mm External dimensions 960 × 720 × 1500 mm Weight 88 kg

Condition: excellent (used), Catalog number: 6368 TECHNICAL DATA - max. width of the workpiece: 230mm - max. height of the workpiece: 130mm 7 spindles: 1) horizontal, lower: 230mm, 5.5kW 2) vertical, right: 130mm, 5.5kW 3) vertical, left: 130mm, 5.5kW 4) horizontal, upper: 230mm, 7.5kW 5) horizontal, upper: 230mm, 11kW 6) horizontal, lower: 230mm, 18.5kW 7) universal: 230mm, adjustable at an angle of 360 degrees, 5.5kW - all spindles adjustable up/down, left/right - all spindles equipped with an electric brake - spindle diameter: 40mm - spindles 4 and 5 adjustable electrically up/down - top: 8 feed rollers, metal, twisting, including 2 double rollers - top: 4 feed rollers, rubber - top: 2 pressure rollers - bottom: pawls - bottom, side: 3 pressure rollers - bottom: 2 metal feed rollers, smooth - bottom: 2 double feed rollers, rubber - rollers are pneumatically pressed - feed on Cardan shafts - stepless feed speed adjustment: 5-36 m/min - feed motor: 4kW - electric adjustment of planing thickness: 0.75kW - length of the infeed table: 1980mm - enclosed in a cabinet - central lubrication of the table - dust extraction port diameters: 5x120mm, 2x150mm - dimensions (L/W/H): 5500x1840x1900mm - weight: approx. 5000kg ADVANTAGES - Made in Italy - With 7 heads - For wet and dry wood - Last spindle is universal - Unpainted - Used planer, very good condition Cjdszlr Dvspfx Ai Noha Net price: 116,900 PLN Net price: 27,830 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary depending on exchange rate fluctuations)

Condition: ready for operation (used), Year of construction: 2013, Brand: HSM Type: V-Press 1160 plus Year of manufacture: 2013 Pressing force: 532 kN Voltage: 400 Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feed opening dimensions: 119.5 cm x 65 cm Chsdpjznuiyofx Ai Noa The HSM 1160 V-Press features simple operation, a powerful pressing force, and is energy-efficient. Are you looking for a more compact model? Then take a look at the HSM 860 – ideal for those who want to save space without sacrificing pressing power.

Condition: used, Year of construction: 2005, operating hours: 8,315 h, Stock number: 5799 New Holland MH Plus mobile excavator with variable-geometry boom and 2-jaw grapple ----* Manufacturer: New Holland * Type: MH Plus * Year of manufacture: 2005 * kW: 98 kW / 133 hp Chjdpfx Aiozntg Rj Nea * Tires: 10.00 - / Dual tires * Operating hours recorded: approx. 8,315 hours * Color: Yellow * Enclosed cabin * Variable-geometry boom * Grapple * 270-degree camera * Rotating beacon * Maximum speed: km/h * Additional hydraulic connections * Work lights on the front of the cabin roof * 270-liter diesel tank * 140-liter hydraulic tank Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, isolated errors may have occurred in the text or information. We assume no liability for errors, changes, or sales to other parties. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 24,257 h, This STEINER Projet MJP 2500 Plus was manufactured in 2018. It's a plastic 3D printer designed for detailed and precise object creation. Ideal for prototypes and small-scale production, this machine represents a significant opportunity for those looking to enhance their 3D printing capabilities. Contact us for more information. Chodpfsx Nr Thex Ai Nea Machine Benefits Qualitative Machine Benefits • Offer consist of printer + easyclean postprocessing kit + resin material Technical Machine Benefits • Total print time: 2132 hours 5 minutes • Time since last printer restart: 2905 hours 45 minutes • Total part material used: 74. 5 kg • Total support material used: 67. 2 kg • Layers printed: 295736 • Mco cleaner 2500: 0. 8 kg • Visijet m2 sup: 67. 2 kg • Visijet m2g-cl: 19. 2 kg • Visijet m2r-bk: 3. 2 kg • Visijet m2r-gry: 51. 3 kg Extra Information Machine still under powerAll post processing tools are included

Condition: used, functionality: fully functional, mileage: 276,300 km, first registration: 06/2023, fuel type: diesel, empty load weight: 8,041 kg, overall weight: 18,000 kg, tire condition: 40 %, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, fuel tank capacity: 935 l, brakes: VEB, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 1, total length: 5,890 mm, total width: 2,518 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 12,000 kg, Year of construction: 2023, Equipment: ABS, AdBlue, Bluetooth, additional headlights, air conditioning, central locking, differential lock, electric window regulation, fog lights, fridge, navigation system, onboard computer, parking air conditioner, parking heater, second fuel tank, spoiler, VOLVO FH13.500 Globetrotter I-Save Semi-trailer tractor unit 4x2 Leaf spring suspension at the front - air suspension at the rear Differential lock Automatic transmission VEB-Plus GVWR 18,000 kg - Unladen weight 8,041 kg - Permissible total train weight 44,000 kg Overall truck length 5.89 m Wheelbase 3.70 m Sleeper cab with 1 berth Tires 40% tread ABS Euro 6 530L + 405L fuel tanks Spoiler Full fairing Sun visor Round lights Chedpfx Aieznk D Ho Noa Bluetooth Fog lights Central locking Air-suspended driver's seat Auxiliary air conditioning Auxiliary heater Air conditioning Navigation system Refrigerator Electric windows and exterior mirrors Radio All information is subject to change without notice / errors and omissions excepted.

Condition: used, mileage: 32,169 km, power: 137 kW (186.27 HP), first registration: 09/2024, fuel type: diesel, number of seats: 34, gearing type: automatic, next inspection (TÜV): 09/2026, emission class: euro6, color: white, brakes: retarder, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, ? REAR PARKING SENSOR ? SAFETY HAMMER, CABLE ? PREPARATION FOR REAR TRAILER HITCH FOR LD VEHICLES, 3.5 TONS ? TRAILER SOCKET, 13-PIN ? REVERSING CAMERA ? HEATED WINDSCREEN ? CRUISE CONTROL ? INFO + DVD + MP3. BLUETOOTH (DAB+) ? SWAN DRIVER'S SEAT INFOTAINMENT ? FRONT MICROPHONE INFOTAINMENT ? SCHOOL ZONE SIGN, LED, 25x25 + 40x40 ? HEATER. 1ST DOOR AREA, 8 kW ? 2 PIECES, ELECTRICALLY ADJUSTABLE SUN VISOR ? 3-POINT SAFETY BELT ? USB CHARGER (UNDER THE SEAT) Chsdpfxoyw Eywe Ai Nea

Condition: new, maximum load weight: 36,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website: -ge.de. The following is an excerpt from the equipment list. Complete equipment list available upon request. GOOSENECK: * Gooseneck in SNT design to optimize the loading area length, approximately 3,700 mm long, with a rear slope of approximately 1,000 mm x 6° * For semi-trailer tractors: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX * Grated steel flooring with 5 mm sheet metal reinforcement on the gooseneck and the rear slope * 2-inch kingpin * Guide plate on the gooseneck for the fifth wheel, approximately 500 mm wide * Round NATO socket on the connection bar at the front (Maeler & Kaege VG 96 917) * 1 pair of plug-in aluminum side panels on the gooseneck, approximately 400 mm high, with an anodized finish * 1 LED work light each on the left and right sides at the top of the front wall, operated via an on/off switch (operating the work lights from the semi-trailer tractor is not possible in this case) Chedpfx Aey Auhhoi Noa LOADING AREA: * Loading area, approximately 9,600 mm long, with a rear slope of approximately 900 mm x 6° * Loading area behind the gooseneck can be hydraulically raised and lowered, approximately 3,000 mm long, with a load capacity of up to approximately 9,000 kg * Continuous grated steel flooring with approximately 5 mm sheet metal backing as additional reinforcement on the lifting platform and the loading area, designed for point loads TIRES: * 235/75 R 17.5 3PMSF, twin tires. Brand of our choice * TPMS tire pressure monitoring system according to ECE R 141 AXLES: * BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle with trailing steering * 3rd axle with electro-magnetic reverse locking function, activated via reverse gear and manually * 1st axle with starting assist * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve HYDRAULIC LOADING RAMPS: * 1 pair of two-piece AXS steel ramps with grated steel flooring, approximately 4,920 mm long and approximately 900 mm wide * Hydraulically folding ramp tips * Ramps can be individually hydraulically moved outwards by approximately 235 mm and inwards by approximately 365 mm * Flashing lights on the outer sides of the ramp tips, with a switch next to the ramp operation controls * Ramp locking in the driving position by means of a quick-release mechanism * Painted sandblasted coating on the outer frame of the ramp and on the ramp tip * Mechanical supports in drop-pipe design on the sides of the ramps for support when connecting to loading docks * Operating valves for the hydraulic ramps on the right side of the vehicle BRAKE SYSTEM: * WABCO EBS-E brake system according to EU regulations SURFACE TREATMENT: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection PAINTING: * Trailer: Carmine Red (RAL 3002) * Rims: Silver Gray * Side panels: Aluminum, natural finish * Wheel hubs: According to axle manufacturer * Lamp housing: Pure White (RAL 9010) EQUIPMENT: * Steel front wall, plug-in, approximately 1,600 mm high, including a connection bar for supply lines to the semi-trailer tractor, mounted approximately 1,000 mm from the bottom edge of the outer frame profile * Attachment option for lashing chains on the inside left and right sides of the front wall, including aluminum trays underneath on the left and right sides for storing chains or tension straps * Appro

Condition: new, Year of construction: 2026, LAB 300 PLUS F 16 TERSA - Universal combination machine with aluminum sliding table and three milling speeds for sawing, milling, planing/thicknessing, and optional mortising torsion-resistant steel cast iron construction machine table made of cast iron, hardened and ground easy-running, anodized aluminum sliding table, 10-year warranty on wear of guide rails large fence system with extendable aluminum telescope fence and folding stops with combination saw fence with 45° quick adjustment max. saw blade diameter 315 mm with optional scoring unit, pivotable from 90°-45° helical steel feed roller for consistent wood feed during thicknessing four milling speeds, manually adjustable standard with right/left rotation of the milling spindle Cedpfx Ajcnxa Nei Neha three independent motors for each working unit Scope of delivery: Combination fence/parallel fence Arc milling guard Tersa cutterhead Anodized aluminum sliding table Aluminum fence cheeks Folding stops Eccentric clamping arm Model LAB 300 PLUS F 16 Tersa Item No. 5500314 Technical data ---Technical data circular saw--- Fence length 1600 mm max. saw blade diameter with scoring 315 mm max. cutting height at 90° / 45° 100/79 mm max. ripping width to the left of the saw blade 1660 mm Cutting width on the parallel fence 800 mm Saw arbor speed 3500 rpm Saw blade inclination 90° - 45° ---Technical data planer--- Working width 300 mm Planer table length 1260 mm Cutterhead speed Cutterhead diameter / number of planer knives 72 mm / 3 pcs ---Technical data thicknesser--- Table dimensions 300 x 450 mm min. / max. working height 3 mm / 220 mm max. chip removal 4 mm Feed rate 7 m/min ---Technical data table saw--- Usable spindle length 100 mm max. tool diameter 180 mm, can be recessed max. tenon tool diameter 275 mm max. tool diameter, can be recessed 140 mm Spindle speed 3500/600/800 rpm Spindle diameter 30 mm Motor power 400 V / 50 Hz / S6 - 40% 4 kW (5.5 hp) S6 40% Weight 430 kg Dust extraction port diameter 4 x 120 mm Dust extraction port diameter saw blade guard 60 mm Sliding table with ball bearing system equipped with a proven ball bearing system permanently easy-running thanks to hardened and ground guides not susceptible to dust and dirt due to minimal contact point between the ball and the trapezoidal rail 10-year HolzKraft warranty on wear of the carbide guide rails Dust extraction hose connection The dust extraction ports of the planer (1) and thicknesser (2) point in the same direction. The dust extraction hose can therefore be connected to the machine from the same side for both types of planing. You do not need a hose that goes around the machine. Planing units helical steel feed rollers for a constant and even wood feed massive anti-kickback devices prevent the workpiece from kicking back 3-knife cutterhead ensures an optimal planing result

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 60 t, Used HSM V-Press 1160 Plus vertical press from 2015. The device is regularly serviced by an authorized service center. The press is fully functional and in very good technical and technical condition. Crushing force: 594 kN Voltage / required: 400 V / 50 Hz Csdpfjzmwg Eox Ai Neha Width x height of the loading opening: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Width x height x height of the machine: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Pressed material: foil, mixed paper, cardboard, cutting machine waste Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: ready for operation (used), Allen Bradley 2711P-RDB12C Panelview Plus 1250 Colour Key/Touch Display Module Series D, SN: 41269093, used, minor signs of wear, 100% functional, delivery as shown in photos. Chedpfx Aisx Eqtxj Noa