Used Sassex Attachment Holder For Spiral Drill Bits, 4 Pieces for sale (74,877)

Condition: repair required (used), functionality: limited functionality, power: 49 kW (66.62 HP), first registration: 07/2011, fuel type: diesel, color: orange, fuel: diesel, Year of construction: 2011, Equipment: air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, Holder C 270 Drive System 4-cylinder, 4-stroke Kubota diesel engine, Type 2607, 49.2 kW / 67 hp in the C 270 Hydrostatic all-wheel drive via four equal-sized wheels Infinitely variable speed selection with a total of four pre-selectable gear stages Hydraulic wheel load compensation (combined independently and dependently) Mechanical differential lock, front and rear, simultaneously switchable electrohydraulically Hydraulic service brake and electric parking brake as a drum brake Suspended front and rear axles Cab including heater Heat-protective glazing and sliding side windows Multi-function display (tachometer, operating hour meter, speed indicator, remote thermometer for engine and hydraulic oil, fuel level indicator) Mechanically adjustable steering column 3 storage compartments, sunshade film, interior cab light with door contact switch Hydraulics Multi-function arm console with driving program and differential lock switch Hydrostatic articulated steering with 2 double-acting steering cylinders Additional Equipment Mounting frame for tool-free changing of platforms and attachments Locking rail at the front for adjusting the top link Iodpfszfbu Rox Ah Eetl Electrical system: AC generator 12 V / 90 A – 1080 W Battery 12 V / 88 Ah Battery disconnect switch Radio preparation: wiring harness, antenna, speaker grilles Lighting system according to StVZO (German Road Traffic Licensing Regulations) 7-pin socket at the rear Path signal prepared via Super-Seal plug connector Biodegradable hydraulic oil Stainless steel support pad Standard paint color: Orange RAL 2004 Front linkage Front linkage incl. safety hook CAT IN / CAT I with passive tilt adjustment Rotating beacon Locking block Mechanical PTO shaft, front 1000 rpm at the front Hydraulic flow divider 1 Flow divider, 1st circuit adjustable from 0–25 l/min with line set to the front and rear Return line at the front and rear Hydraulic kit, attachment adjustment pump Attachment adjustment pump 0–80 l/min, variable Line set to the front and rear Return line at the front and rear Leakage oil line at the front and rear Hydraulic tilting device for superstructure arms Hydraulic set 2 3 double-acting control valves 2 with floating position 4 quick-release couplings 2 quick-release couplings at the rear, angled connected via a T-piece with quick-release couplings at the front Active hydraulic tilt adjustment 1 joystick incl. direction of travel switch and speed control Electro-hydraulic attachment relief Comfort package Driver's seat with air suspension, armrest 2 work lights at the front 2 work lights at the rear WITH THE FOLLOWING DAMAGES: - Articulated joint worn out - Age-related and usage-related wear on the vehicle - Rust damage corresponding to the age Changes, typing errors, mistakes and prior sale are subject to change. All information is provided without guarantee. The sale is made with the exclusion of any warranty or guarantee.

Condition: used, Shank cutters and drill bits in mint condition, unused, sharpened and second-hand, for CNC machines, as shown in the examples. Isdpfxjzrybpe Ah Eotl Technical data: - Length: Various - Diameter: Various - Shank: Various - Weight: 12 kg - Application: Woodworking

Condition: used, Year of construction: 2017, operating hours: 9,370 h, Technical Data Working Area Axis Travel - X-axis: 4000 mm - Y-axis: 1970 mm - Z-axis: 455 mm Machining Area - X-axis working area: 3000 mm - Y-axis working area: 1550 mm - Z-axis clearance: 150 mm Main Spindle - 5-axis electric spindle - 5-axis spindle with universal joint - Power: 12 kW (S6 operation) - Tool holder: HSK F63 - Maximum speed: 24,000 rpm - Speed range: 1,000 - 24,000 rpm - Ceramic bearings - Liquid-cooled spindle - Clockwise/counterclockwise rotation - Integrated tool changer interface - Electrically controlled extraction hood - Maximum tool weight: 6 kg - Maximum saw blade diameter: 350 mm Tool Changer System Linear Tool Changer - 12-position - Interface for tool holders - Maximum tool diameter: 250 mm - Maximum tool length: 240 mm Disc Tool Changer - 18-position - Mounted on the traversing portal - Maximum tool diameter: 250 mm - Maximum tool length: 280 mm Circular Saw Blade Changer - Maximum saw blade diameter: 350 mm Drilling Unit DH18 6H 2S Drilling Head - 12 vertical spindles: 7 in the X-direction, 5 in the Y-direction - 6 horizontal spindles: 4 in the X-direction, 2 in the Y-direction - Drilling stroke: 70 mm - Maximum drill length: 70 mm - Tool holder diameter: 10 mm - Individual drive for each spindle Dadoing Saws - 2 dado saw blades: 1 in the X-axis, 1 in the Y-axis - Maximum saw blade diameter: 120 mm - Maximum saw blade thickness: 5 mm - Speed adjustable up to 6,000 rpm Vacuum and Clamping System Console Table - 6 consoles - Front and rear programmable stops - Wireless dual-circuit vacuum system - Height of vacuum suction cups: 100 mm - Pneumatic console locking - 4 adjustable side stops - Additional support arms Vacuum Pump Flow Rate: - 90 m³/h at 50 Hz - 108 m³/h at 60 Hz Additional Vacuum Equipment - Vacuum connection for template machining (left side) - Additional vacuum connection for template milling (right side) - Controlled compressed air connections for frame clamps - Separate vacuum and compressed air control for all consoles WoodFlash Software Package Control Panel - Complete machine control - Loading and execution of programs - Tool and machining management - Sensor monitoring - Manual machine commands Mobile Control Panel - 24" LED monitor - Keyboard and mouse - USB port Handheld Control for Feedrate Control - Feedrate override - Emergency stop button - Manual feedrate adjustment during machining Safety Devices - CE safety system - Light curtain safety system - Emergency stop system - Protective fence on the left side - Safety monitoring of the doors Ijdpjzuw H Ijfx Ah Eetl - Vacuum and compressed air sensors - Additional safety mat system Operating Hours: 9370 hours

Condition: good (used), Quick-change tool post, tool post head, quick-change tool post, quick-change drill bit post, quick-change boring bar holder, quick-change turning tool post, double tool post, double turning tool post, double tool post, double quick-change tool post, 4-way turning tool post, quadruple tool post, 4-way quick-change tool post -Quick-change tool holder: 4-way quick-change boring bar holder -Recording dimensions: see photos -Clamping height: 59/34 mm -Clamping length: 200 mm Ijdewvpvgspfx Ah Ejtl -Dimensions: 330/200/H285 mm -Weight: 30.3 kg.

Condition: good (used), Reamers, solid drills, indexable insert drills, indexable insert drills with internal cooling, indexable insert solid drills -Widax: Indexable insert drill with internal cooling -Type: 21676017 Ø 66 mm Ijdpfx Aoqyi Ukeh Estl -Hole: Ø 60 mm -Dimensions: Ø 123 x 310 mm -Weight: 7.4 kg

Condition: used, Year of construction: 2018, operating hours: 6,442 h, Technical Data Working Area Axis Travel - X-axis: 4000 mm - Y-axis: 1970 mm - Z-axis: 455 mm Machining Area - X working area: 3000 mm - Y working area: 1550 mm - Z clearance: 250 mm Axis Systems - X-axis: Helical rack and pinion drive - Y-axis: Precision ball screw drive - Z-axis: Precision ball screw drive - Linear guides on all axes - Automatic central lubrication Main Spindle - 5-axis electro spindle - Type: 5-axis spindle with universal joint - Power: 12 kW (S6 operation) - Tool holder: HSK F63 - Maximum speed: 24,000 rpm - Ceramic bearings with air cooling - Full power available at approximately 12,000 rpm - Speed range: 1,000 - 24,000 rpm - Clockwise rotation - Integrated tool changer interface - Liquid-cooled spindle - Electrically controlled extraction hood - Maximum tool weight: 6 kg - Maximum saw blade diameter: 350 mm Tool Changer System 12-position linear tool magazine - Mounted on the left side of the machine frame - Separate station for tool changers Isdpfxozuw E Ro Ah Eetl - Maximum tool diameter: 250 mm - Maximum tool length: 240 mm 18-position disc tool magazine - Mounted on the gantry - Suitable for drilling tools and tool changers - Maximum tool diameter: 250 mm - Maximum tool length: 280 mm Drilling Aggregated Head DH18 6H 1S drilling head - 12 vertical spindles: 7 spindles in the X direction, 5 spindles in the Y direction - 4 horizontal spindles in the X direction - 2 horizontal spindles in the Y direction - Drilling stroke: 70 mm - Maximum drilling depth: 70 mm - Tool holder: 10 mm - Individual control of the spindles - Integrated slotting saw - Saw blade diameter: 120 mm - Maximum slotting saw blade thickness: 5 mm - Speed up to 7,500 rpm Vacuum and Clamping System Console Table - 6 consoles with front and rear stops - Wireless two-circuit vacuum system - Height of vacuum cups: 100 mm - Pneumatic console locking - Programmable pneumatic stops - 4 adjustable side stops - Reinforced support arms - Load-bearing capacity of the support arms: 40 kg each Vacuum Pump Capacity: - 90 m³/h at 50 Hz - 108 m³/h at 60 Hz - Additional vacuum connection for template machining - Controlled compressed air connections for frame clamps - Separate vacuum and compressed air switching for all consoles WoodFlash Software Package Control Panel - Complete machine operation via the CNC panel - Program creation and editing - Tool and workpiece management - Manual machine commands - Monitoring of vacuum, compressed air and safety systems Mobile Control Panel - 24" LED monitor - Keyboard and mouse - USB connection Operator Device for Feed Rate - Manual feed override potentiometer - Variable feed rate adjustment during machining Safety Devices - CE safety system - Safety mats instead of light curtains - Emergency stop system - Protective fence on the left side - Safety monitoring of the doors - Sensors to monitor vacuum and compressed air Optional Equipment - External release switch - Protected energy chain system - Additional locking for A and C axes - Saw blade changing station on the gantry - Operating hours: 6442 hrs.

Condition: good (used), Drill bit, twist drill bit, drill bit, for drilling rig, drilling center -Quantity: 53x NC twist drills with tightening thread -Diameter: 8x Ø32mm 9x Ø34mm 8x Ø36mm Itjdpoc Innkjfx Ah Esl 6x Ø38mm 1x Ø39mm 8x Ø40mm 7x Ø41mm 6x Ø42mm -Intake: MK4 -Type: HSS -according to pictures - Sale: only complete -Weight: 84kg

Condition: good (used), quick-change chuck, quick-change holder, quick-change head, keyless drill holder, quick-change insert -Quick-change chuck holders: 18 pieces, without: arbor -2x sleeve: MK1 -7x sleeve: MK2 -6x sleeve: MK3 Ijdjwa Invepfx Ah Eotl -3x sleeve: MK4 -Mounting: Ø 42 mm -Price/Delivery: complete -Transport dimensions: 300/200/H170 mm -Complete weight: 21 kg

Condition: used, Year of construction: 2015, functionality: fully functional, power: 10 kW (13.60 HP), input voltage: 400 V, travel distance X-axis: 4,050 mm, travel distance Y-axis: 2,560 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 3,120 mm, workpiece width (max.): 2,160 mm, workpiece height (max.): 105 mm, number of axes: 4, number of slots in tool magazine: 16, Equipment: CE marking, For sale is a well-equipped CNC machining center, FORMAT-4 profit H10 22.32, manufactured in 2015. This machine is perfectly suited for precise processing of wood, MDF, plastics, and sheet materials. The FORMAT-4 H10 stands out for its high traverse speeds and robust construction. Particularly noteworthy are the powerful 10 kW HSK-F63 milling spindle, the 360° C-axis, and a total of 16 tool positions. Technical Data * Manufacturer: FORMAT-4 * Model: profit H10 22.32 * Year of manufacture: 2015 * Type: CNC machining center Working Area * X axis: 3,120 mm * Y axis: 2,160 mm * Z axis: 105 mm Traverse Paths * X: 4,050 mm * Y: 2,560 mm * Z: 280 mm Traverse Speed * X/Y: 100 m/min * Z: 30 m/min Ijdpfxjy Smi Ae Ah Eetl Milling Spindle * 10 kW HSK-F63 milling spindle * Speed range: 1,000 – 24,000 rpm * Clockwise/counterclockwise rotation * Ceramic bearings * Air-cooled Tool Changer * 2 tool changers with a total of 16 tool positions * HSK-F63 interface * Tool slots on the machine frame and mounted laterally Additional Units * C-axis 0–360° Vacuum/Table * Matrix/grid table * 2 vacuum pumps, each 250 m³/h * Two rows of stops Control/Software * FORMAT-4 H10 control system * WoodFlash software * DXF import * 3D graphic display * Parametric programming * Tool database for up to 500 tools * Mobile operator console * Handheld terminal Additional Equipment * Automatic central lubrication * UPS for the control computer * Network/internet preparation * Central extraction system * Preparation for drilling head * Operator tools and documentation included Condition: Machine from ongoing production. Well-maintained condition. Inspection by appointment possible.

Condition: used, Tool holder, milling holder, milling tool -Number: 3x SK50 holders -different recording sizes: see pictures Iodpfxsd I Tm Ts Ah Ejtl -Sale: only complete -Weight: 12 kg

Condition: used, Horizontal drilling machine with 4 spindles Itodpfx Aszxg Dqjh Eel

Condition: used, Tool holder, milling holder, milling tool Itodpfx Ahod I Tm Es Eol -Number: 2x SK50 holders -1x holder: Ø 27x 85 mm -1x holder: Ø 70 x 220 mm -Sale: only complete -Weight: 18 kg

Condition: ready for operation (used), MM 360 - 2 up trimmer kit, castings only ! Ijdpfx Ajir A E Ish Estl

Condition: used, Tool holder, milling holder, milling tool, long milling arbor -2x mounts: SK50 -1x diameter: Ø 27 x 300 mm -1x diameter: Ø 32 x 300 mm -Sale: only complete -Weight: 12.8kg Itodec Ih R Tspfx Ah Ejl

Condition: used, Tool holder, milling holder, milling tool Iedpfx Asc Innmjh Eotl -Number: 3x SK50 holders -different designs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -suitable for: tool changer -Sale: only complete -Weight: 10 kg

Condition: used, Tool holder, milling holder, milling tool -Number: 3x SK50 holders -different designs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools Itjdjcx Sdropfx Ah Esl -suitable for tool changers -Sale: only complete -Weight: 10 kg

Condition: good (used), Wood router bit, router head, router tool, wood router bit, profile router bit -Hole: Ø 40 mm -Outer diameter: 180/220 mm -Reversible inserts -Tool No.: -Tool No.: 121212 Y22 -Tool No.: Number: 13 milling cutters Price: complete Itedpfx Aeb A Hhnsh Esl -Weight: 150 kg

Condition: used, Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder, driven tool, bar gripper, thread cutting head -Manufacturer: Sandvik, 17 pieces turning tools with tool stand -Socket: Ø 40 mm -Various types: see photos, more pictures can be sent Itsdpfx Asgl Dutoh Esl -Sale: is only sold as a whole -Dimensions: 400/660/H500 mm -Weight: 25.6 kg

Condition: used, Load jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, load jack thread -Load lifter: 4 pieces, holder Ø 80 mm -Shackle: M24 2 pieces per part Itodsgt Rdzopfx Ah Esl -Price: complete -Dimensions: 250/155 / H250 mm -Weight: 36 kg / pc.

Condition: used, Boring head, spindle head, drill head, grooving head, grooving head, spindle drilling head, boring head, spindle tool, peeling drill -Spiral drill: Ø 69 mm -Intake: MK3 -Guide: Ø 56.5 mm Itodpjinwu Aofx Ah Eel -Dimensions: 355/70/57 mm -Weight: 2.3 kg

Condition: used, Tool holder, milling holder, milling tool -Number: 58x SK40 mounts -different designs -partly with pull studs Itodpfx Ahscx Sc Hj Eol -Spindle tools: different diameters -Sale: only complete -Weight: 108 kg

Condition: good (used), Wood router bit, router head, router tool, wood router bit, profile router bit Ijdpfsb A Sqrjx Ah Eetl -Outer diameter: 192 mm -Quantity: 1 milling cutter Price: complete -Weight: 5 kg

Condition: used, Tool holder, milling holder, milling tool -Number: 2x SK50 holders -different designs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -suitable for tool changers -with CNC pull studs -Sale: only complete -Weight: 8 kg Ijdpfxec I Tdqo Ah Eotl

Condition: excellent (used), Auxiliary circuit breaker, miniature circuit breaker, fuse, line switch, miniature circuit breaker, load break switch, terminal block, load disconnector, fuse-switch disconnector, fuse holder base Itodpfxjyg Dk Eo Ah Eol -Manufacturer: wöhner, fuse holder base, 3 pieces, unused, original packaging -Type: NH 2 400 A -Quantity: 2 boxes with 3 items each available -Price: per set -Cardboard dimensions: 260/210/H130 mm -Weight: 2.8 kg/set

Condition: good (used), Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve, Morse taper adapter -Morse taper sleeves: Adapter sleeves, reducing sleeve MK6/MK5 -Type: MK6-MK5 -Dimensions/Quantity: see photos -Transport dimensions: 620/250/H63 mm -Weight: 29.8 kg Itsdezlf Saspfx Ah Eol