Used Sanco Dosing Installation for sale (10,024)

Condition: used, Year of construction: 2008, Manufacturer: COMEC Model: FUST-P-40 Year: 2008 Type: Semi-automatic filling line Containers: Drums, cans, off-centre-neck containers Max. container height: 500 mm Theoretical output: 200 x 20-litre containers per hour Bedpez Ic Nfsfx Amrjdh Dosing method: Weight-based, using a load cell Weighing range: 0.5 to 30 kg Accuracy: 10 g Calibration: Automatic Filling speeds: 2 (high flow rate / low flow rate within the same cycle) Filling spout: With anti-drip valve Conveying: Roller conveyor Capping: Manual placement, tightened using a hand-held pneumatic screwdriver Control: Control panel FAP-200/1 type feed unit - Filter (cylindrical coil): 500 microns - Pneumatic diaphragm pump - Flow rate: 2 to 4 m³/h - Transport trolley Documentation: Available Video: On request

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Bsdpfx Asvvkipomrsdh

Condition: like new (used), functionality: fully functional, warranty duration: 12 months, filling weight (min.): 5 g, filling weight (max.): 5,000 g, Introducing the brand-new DLPACK 260 Servo! Built with stainless steel and equipped with Siemens controls, this machine delivers exceptional performance for a wide range of applications, from powders and granules to food and non-food products. The first 20 machines have already been built and commissioned, achieving an output of up to 105 bags per minute. With a dosing range of 5g to 5000g and bag sizes from 60–260 mm (W) × 80–500 mm (L), it is designed to handle almost any packaging requirement. Key Features: Brand: DLPACK Model: DLPACK 260 Servo Capacity: Up to 105 bags/min Dosing range: 5g – 5000g (via separate dosing) Bag format: 60–260 × 80–500 mm Construction: Stainless steel Control system: Siemens Warranty: 12 months Delivery time: 10 weeks Bdsdpex Ag Iksfx Amrsh Optional extras: Printer, labeler, weigher, screw dosing, and more – fully customizable for your application. Suitable for pillow bags and almost any product type. About DL Packaging DL Packaging specializes in modernizing and installing dosing systems, vertical form-fill-seal machines, cartoners, and end-of-line packers. Our “Second Life Packaging Solutions” are rebuilt to near-new standards and can be combined into fully automated lines – all from a single source. With over 30 years of experience, in-house dosing capabilities, comprehensive warranties, and tailored advice, our experts design the perfect machine or packaging line for your needs. Remote support, maintenance contracts, and a warehouse stocked with over 20,000 parts ensure your production keeps running smoothly. DL Packaging – your worldwide partner in retrofitted packaging solutions, based in Oosterhout and proud retrofit partner of the Rovema Group.

Condition: new, Year of construction: 2026, Abrasive Conveyor Screw 5m with Dosing Hood For installation as a transverse screw conveyor to the bucket elevator at the end of the hall (pushing abrasive across the full hall width with a forklift) - 5m + outlet to bucket elevator, solid-blade screw Ø250mm with 5mm thick screw flights. - Can be used as an abrasive storage hopper. The blasting system draws abrasive as needed via a level probe. Bsdpoynz Idjfx Amrsdh - Depending on installation depth, allows up to 24 hours of uninterrupted blasting without hall cleaning. - Hall cleaning takes only 10 minutes using a forklift or wheel loader. - Very low maintenance and repair costs compared to a complete conveyor floor. - Particularly suitable for very heavy workpieces. - Lower acquisition costs compared to a full-area conveyor floor. - Reduced foundation costs compared to a full-area conveyor floor. - Can be pushed across the full hall width as opposed to a sweep pit. - Very high warranty period.

Condition: used, Applicable material: Concrete Capacity: 30 m^3/h Site type concrete batching plants has been issued for easy installation and easy legal procedures. Site batching plants consist of aggregate hoppers, from 2 to 8 pcs differant aggregate can be used such application, belt onveyor or skip hoist to transfer material from hoppers to mixer, mixing section, pan,planetery,twin shaft, single shaft or cone mixer, weighing section. Site type concrete batcing plant is for very fast location changer customers. After once installation you will never ned to disassembly iy again due to 4.5 full operation height. With 0,5 and 0,75m3 single shaft and planetery mixer; Polygonmach site plants are best for small scale operations and all type of concrete you need. Site type plant a kind of mobile type plant however it has got shipment price advantages, all site type plant set consist of concrete transfer belt conveyor, cement silo can go with single container around the world. With axles, towing hook make it easy to trasnport in hours. Bdsdpjylhdgsfx Amrsh Portable batching plants,concrete plants, mixers are used to prepare precious dosed material by pneumatic cylinders and clamshell outlets, afterwards the material is weighed by weighing bin under hoppers. The material has been consisted of sand and aggregate(0-4mm, 4-8mm, 8-16mm, 16-32mm or similar). For excise material transfer procedure, belt conveyor. The sand and aggregate is waited before discharge to mixer. Additonally, there is weighing bin at top of mixer which consist of cement weighing scale/hopper, water hopper, liqued addtive hoppers. After sand and gravel discharged into mixer, cement, water,additive, sand and gravel is mixed on recipe based the mixing time chnages as per recipes. Mobility: mobile Capacity: 30 m³/h(1,059.44 ft³/h)

Year of construction: 2025, condition: new, Horizontal cement silos with a capacity of 45 m³ represent a practical, flexible, and cost-effective solution for the storage and precise dosing of cement and other powdered materials. Thanks to their compact modular design, no foundations, additional construction work, or complex installation procedures are required. This makes the silos ideal for mobile and stationary concrete batching and mixing plants, as well as construction sites with limited space or frequent equipment relocation. The structure is manufactured from high-quality steel with durable surface protection, ensuring a long service life and reliable operation even in demanding working conditions. Each silo is standardly equipped with: - integrated aeration system, - dust filter, - safety valve, - material level sensors, - screw conveyor for continuous and reliable material discharge. The silos can also be equipped with an electronic system for connection to existing mobile and stationary concrete batching and mixing plants, enabling easy integration into existing production systems. The horizontal construction allows easy transportation and quick installation on site, while easily accessible components ensure simple and safe maintenance and cleaning. Available Versions HS 45 Standard – The Standard version is designed for reliable storage and continuous material dosing, ensuring simple operation and cost-efficient performance. Features: - Time-controlled material dosing - Easy integration with existing equipment - Ideal solution for standard production processes - Lower investment and maintenance costs HS 45 W-Series – The W-Series version is equipped with load cells for direct and precise material dosing. Features: - Real-time electronic weight measurement - Precise and automatic cement dosing - Enhanced control of mix structure and production process - Ideal for automated and professional concrete batching and mixing plants Bdsdpfx Amszcwqqjrjh Available dosing capacity versions: - 15 m³/h - 25 m³/h - 40 m³/h

Year of construction: 2021, condition: like new (used), functionality: fully functional, machine/vehicle number: LE-2104-133, For Sale: Labtech LE30-30/C 3D Filament Extrusion Line We are offering for sale a high-quality 3D filament extrusion line manufactured by Labtech Engineering Co., Ltd., a well-known producer of laboratory and production extrusion equipment. Technical Specifications Manufacturer: Labtech Engineering Co., Ltd. Model: LE30-30/C Year of Manufacture: 2021 Power Supply: 400 V Phase: 3 Installed Power: 16.7 kW CE Certified Price: EUR 45,000 Condition The machine is in excellent condition, has been professionally maintained, and is ready for immediate production use. Included in the Sale Complete 3D filament extrusion line Bdodpfx Ajzgwlzsmrjh Additional spare barrel 25mm Additional spare screw 25mm/24D Optional Equipment Available for Purchase Laser diameter gauge Material dryer Material feeding/dosing system This extrusion line is suitable for the production of high-quality 3D printing filaments and offers reliable operation with consistent output quality. Additional photos, technical details, and machine inspections can be provided upon request. Location: Ivanka pri Nitre

Condition: refurbished (used), Year of construction: 2011, operating hours: 818 h, Hako Scrubmaster B45 TB 430 with On-Board Chemical Dosing. Bsdpfx Amou Stndorsdh Refurbished scrubber-dryer with new batteries, new suction turbine, and much more – includes 6 months warranty and new DGUV V3 electrical safety inspection with test report. Working width without squeegee: 43 cm Working width with squeegee: 76 cm Maximum area coverage: 1,700 sqm/h Fresh water tank: 45 L Recovery tank: 45 L Traction drive: Yes Drive type: Electric 24V Battery: 2 x 12V 85Ah GEL batteries Installed new parts / Performed repairs: - New suction motor 24V 400W - 2 x 12V 85Ah GEL batteries (new) - Brush deck / brush motors overhauled including new ball bearings, carbon brushes, and bumper strip - All hoses replaced (new) - New disc brushes - New ACLA rubber wheels - New squeegee blades - New fresh water filter In addition, we offer: Service, repairs, and sales for all common Hako models.

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 1630, overall weight: 7,800 kg, warranty duration: 6 months, power: 85 kW (115.57 HP), Complete production line for sale, based on a Di Più BRIK MB100 briquetting press (complete production line). Fully refurbished DI PIU BRIK MB100 machine (factory-refurbished in 2025), ready for immediate operation. The machine is designed for high-capacity briquetting and is suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. Bdjdpfx Amswrp Emersh It has been newly refurbished at the Di Più factory: all vital components have been replaced, including all cables, electrical wiring, and required electrical equipment. The machine is brought to as-new condition and comes with a 6-month Di Più factory warranty. The machine can produce briquettes with or without a hole, with a diameter of 90mm to 110mm, using soft or hard wood, in either round or square shapes. Machine inspection is possible at the factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy. The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compacting wood, sawdust, and other waste materials into wooden briquettes. The ideal humidity of the input material is between 8% and 12%, and the particle size between 1mm and 12mm. Technical data: - Production capacity: 1,300 – 2,300 kg/h (for sawdust density 160–200 kg/m³) - Briquette diameter: 90 – 110 mm - Main motor power: 75 kW - Total installed power: 98 kW - Piston compression pressure: 2,000 – 2,500 kg/cm² - Vertical screw with gearbox: 5.5 kW - Oil pump: 1.5 kW - Oil pump for extruder head closure: 1.5 kW - Feeder with screw and adjustable speed: 1.5 kW - Oil system for bronze bearing lubrication: 100 liters - Briquette output monitoring sensor (automatic shutdown when material supply runs out) - Safety covers for moving parts - Oil pressure sensor - Control cabinet - Input material storage hopper (buffer) - Level sensor for feed system monitoring - Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for complete operation and integration into a briquetting line: ACCESSORIES – MB100: - Dosing silo: Made of heavy-duty steel. Diameter: 1,500 mm, height: 1,000 mm. Equipped with a rotary cutter with 2.2 kW gearbox, mounted on a robust steel frame. Material supply is monitored by a level sensor. - Briquette cooling line after extrusion, total length 20 meters - Automatic briquette cutting saw - The saw automatically cuts briquettes to the operator's preset lengths - Device for producing briquettes with a hole - Machine head cooling system with ice water - The system produces 50 liters/min of ice water for effective briquetting head cooling. - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and a large energy storage tank with an immersed water-to-refrigerant heat exchanger. - The heat exchanger is a high-efficiency fin-pack type, made of copper pipes and aluminum fins. - Water tank with a capacity of 800 liters - Water feed pump (50 l/min – 20 m.w.c. – 0.55 kW) with three-circuit DN25 valves for regulating cooling water temperature at the briquetting head - Digital electronic temperature controller connected to an NTC sensor (measuring element d.6 × 52 mm, IP68, AISI 316) OPTIONAL: NOVAPAC packaging machine Possibility to purchase an additional NOVAPAC packaging machine, fully compatible with the Di Più BRIK MB100 and other machines. An ideal solution for automatic packaging immediately after briquetting. Year: 2013 Price for Novapac: €19,000 Equipment visible in the las

Year of construction: 2010, condition: good (used), Hobart commercial dishwasher for under-counter installation with dosing pump for detergent and rinse aid Completely made of stainless steel If you have any questions, please call Bdjdpec Utiqefx Amrsh Thank you Please call me to discuss further details.

Condition: excellent (used), ROLLER COATER (REVERSE) Max working width mm 1300 Length of the machine mm 1600 approx Built-in Electric and command cabinet Feeding system by motorized rollers (power KW 0.75) Feeding speed adjustable (from 6 to 24 m / min) Total installed power KW 4,3 No. 2 working heads: * 1st head (with 2 rollers) Chromium plated Dosing roller diam. mm 174 + Rubbered Spreading roller diam. mm 248, with 2 adjustable speed variators (power KW 0.37 + KW 0.75), with also a counter-placed (bottom side) reference rubbered roller * 2nd head (with 2 rollers) Bdjdpfx Aof E Npkomrsh Chromium plated Dosing roller diam. mm 174 + Rubbered Spreading roller diam. mm 248, with 2 adjustable speed variators (power KW 0.37 + KW 0.75), with also a counter-placed (bottom side) reference rubbered roller

Year of construction: 2024, condition: new, ~ SPEED 700 , SEMI AUTOMATED ~ APPLICATIONS Production of: - paving - kurbs - concrete blocks for: -masonry -foundation blocks -posts, floor slabs -chimneys, -gutters -roadway gutter covers. ADVANTEGES : - Vigorous vibration coupled with hydraulic pressing of the concrete guarantees high quality concrete products. - Vibrators mounted on the counter mold play an important role in concrete compaction. - Chrome-plated pipe guide columns - Teflon-coated sliding bearings - Our wide range of molds can provide a diverse production. - Reliable mechanical and hydraulic systems. OPERATE : ~ Mostly manual: -Drawer(back/ fort -Mold (up/down) -Counter Mold (up/down) ~ Commands executed automatically: -start/ stop vibration when reaching height -start/ stop pallet feeding exhaust line stop) COMPONENTS: 1.) the press 2.) pallet stacking space 3.) pallet feeding line 4.) concrete bunker 5.) drawer (1) for concrete mold feeding 6.) pallet discharge line with fresh products 7.) hydraulic unit 8.) lever panel for the machine operator TEHNICAL FEATURES: - Pallet dimensions: 700x670x40mm - Active surface: 640x640mm - Minimum/maximum finished product height: 40mm/ 250mm - Vibration frequency: 3000rpm - Hydraulic pump flow: 40 l/min - Cycle time: 60 -100 sec (Semi-automatic version) - Cycle time: 30 – 50 sec (Fully automated version) - Installed power: 15.50 kW - Hydraulic power unit: 7.5 kW - Vibrating table vibrators: 6.00 kW + 0.28 kW - Counter mold vibrators: 0.80 kW - Discharge line: 0.55 kW - Supply voltage: 380V OVERALL DIMENSIONS: Width: 1.60m (without hydraulic unit and control panel) Length: 5.60m Height: 2.85m Machine mass (without mold): 4,000 kg Approx. mold mass: 250 - 300kg ADDITIONAL PRODUCTS / OPTIONAL: 1.) AUTOMATIC OPERATION : ( + 6.300 euro ) Bedpohufyhsfx Amredh - PLC (Mitsubishi Electric) logic programmer + touch display + software for automatic machine operation Reduces the time of a production cycle, higher productivity (30 -50sec) 2.) SECOND DRAWER (2) for finishing layer for paver and kurbs + BUNKER ( + 3.900 euro ) 3.) CONCRETE MINISTATION SEMIAUTOMATED ( + 18.800 euro) Component parts: a.) Sand bunker 2 m2 + Volumetric dosing with conveyor belt + Vibrator b.) Gravel bunker 2 m2 + Volumetric dosing with conveyor belt c.) Electric control panel d.) Concrete Mixer MX 300 ( Fluid concrete: 300 liters Semi-wet concrete: 200 liters, 2.4 cubic meters of semi-wet concrete/hour ) 4.) AUTOMATIC LIFT (elevator) ( + 4.000 euro) 5.) CONVEYOR 6M , for transporting the concrete to the machine bunker ( + 4.000 euro) - Band width: 500mm - 7mm smooth rubber mat with 3 inserts - Motor 1.5kW (380V) PLEASE FOR THE COMPLETE OFFER SEND US AN EMAIL.

Condition: used, This listing is for the Watson Marlow 620 Du/R Peristaltic pump The unit is in full working condition and is ready for immediate use The 620DU is a process peristaltic pump (i.e. hose pump) designed for metering, dosing, and transfer of fluids. Because it is a peristaltic design, the fluid is contained entirely within the tubing, avoiding contact with internal moving parts (other than the tubing). It is suitable for remote control, automation, and integration into control systems (SCADA, factory logic, etc.). Wide control range & precision: The large turndown (2,650:1) gives flexibility to handle both very low and high flow rates with fine control. Remote / automation capabilities: Because it supports analog and digital interfaces, it’s well-suited for integrated systems. Pump protection & security: PIN locking helps avoid unintentional changes in process-critical applications. Low maintenance on non‑wetted parts: Since only the tubing contacts fluid, mechanical wear is mostly on the tubing, making part replacement simpler. Safe to run dry: Peristaltic pumps typically tolerate running dry without damage (unlike many positive displacement pumps). Reversible / ability to back‑flush: This is helpful when attempting to clear lines or avoid clogging. Bdedpfoxhdt Iex Amrsh Limitations / Considerations Tubing wear / life: The hose or tubing is the consumable component. Chemical compatibility, pressure, and mechanical stress affect how often tubing needs replacement. Upper pressure / flow limit: While it handles decent pressure (~2 bar standard, possibly up to 4 bar variant), it’s not suited for very high-pressure pumping tasks. Enclosure limitations (non-“N” model): The standard 620DU is not fully sealed, so it may not be ideal for wet or harsh environments unless you use the “N” variant. Cost / complexity: More features, interfaces, and protection can make the system more complex (and costlier) to configure, install, and maintain.

Year of construction: 2019, condition: ready for operation (used), This DEMAG Systec 210/580-840 was manufactured in 2019. It's a hydraulic injection moulding machine with a clamping force of 210 tons and a power output of 60 kW. It has been used for 31,132 operating hours. Consider the opportunity to buy this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Contact us for more information. • The dosing unit (orange part) is not included. • Integrated socket combination, country-specific, • can be switched off via main switch and shutdown program • 2 x Schuko 1Ph/230V/16A; 2 x IECEE 3Ph/400V/16A residual current device • Pneumatic 5/2 valve No. 1 on movable mold clamping plate; • programmable, supplied via central air connection • includes hoses. Inputs and outputs freely programmable; 3 inputs and 3 outputs; • Terminal point outside the control cabinet • Interface for additional nozzle heating band; socket only Bsdpfxex D Nluo Amrjdh • 2-circuit core puller via switching valve on movable mold clamping plate; Q-independent (programmable); • With pilot-operated check valves to prevent core creep • Mold connection dimensions E (similar to Euromap March 96) • With side ejector plate, centering diameter of fixed platen: 160 mm • Centering diameter of movable platen: • Mold installation height increased by 100.0 mm • Min: 340 mm • Max: 790 mm

Condition: new, functionality: fully functional, MIKROMOLD desktop injection molding machine It was not used, NEW. It is electrically driven and suitable for individual and series production of small plastic parts. The machine requires small space. Bdsdpfx Aoxrcq Hsmrsh Parameters: Closing force: 30kN Piston diameter: 20mm Dose: cca15g Tool: width 75-120 mm, hight min. 80 mm, length 75-120 mm Dimensions: hight 1100 mm, width 310 mm, length 850 mm Weight: 60 kg Heating: 730W Injection molding: max. 700bar Energy demand: 230V; 50Hz Power requirements: 240V; 50Hz Materials used: General plastics + macromelt Control: card PC Machine handling: 7-inch touch screen (HMI) for data entry and status display, two-hand start and emergency button Data management: 40 program saves Material feeding: From a tank on the machine, gravity-fed The manufacturer's complete manual is available for the machine. Application areas: Due to the incredible versatility of injection molding, it can be found in almost every industry. Automotive industry - one of the largest users Cars contain many plastic parts, such as bumpers, dashboards, door panels, light housings, under-the-hood components (e.g. intake manifolds, tanks), and smaller interior components such as buttons and switches. The use of plastics contributes to reducing the weight of vehicles, which results in fuel efficiency and lower emissions. It is particularly important in the medical and pharmaceutical industries, for the production of disposable medical devices such as syringes, petri dishes, catheter connectors, drug dispensers and diagnostic test housings. Electronics industry - for the housings, connectors, buttons and other precision parts of devices, e.g. plastic housings of mobile phones, laptops, televisions and household appliances. Consumer goods and household appliances - toys (e.g. LEGO), kitchenware, furniture, sports equipment and most garden tools. Housings, handles and internal parts of household appliances such as washing machines, vacuum cleaners and coffee makers. Packaging industry - bottle caps, food containers, buckets, crates and other packaging materials Construction industry - pipe connectors, fittings, switch and socket covers, insulation elements and other profiles. PVC and PP are common in this application area, where durability, chemical resistance and ease of installation are the main considerations. Agriculture - elements of irrigation systems, machine covers, tank and other equipment parts. Corrosion resistance and durability are key here.

Condition: good (used), functionality: fully functional, Hard rock splitting plant - essentially consisting of: Feed hopper Bsdpfx Asufih Djmrjdh SVEDALA H-36 cone crusher Dosing hopper SANDVIK H-200 cone crusher plant, with pre-screening machine Dosing hopper with discharge belt 2 x double deck screening plants approx. 1,700 x 3,000 mm and approx. 1,200 x 3,500 mm various conveyor and stockpiling belts Complete electrical installation with control cabinet in container

Condition: excellent (used), ROLLER COATER with SINGLE SPREADING-COATING ROLLER Max working width mm 1300 Length of the machine mm 900 (ca.) Thickness of the panels (working height): mm 3 - 80 Adjustable feeding speed: m/min 5 -20 PLC control pane (Touch Screen) Telemecanique/Schneider Built-in electric and command panel Total installed power KW 2,9 Bdodpfjgz Swlox Amroh Equipped with: 1°) Dosing unit (Chromium plated Doctor roller diam. mm 173, KW 0,75 ca.) 2°) Coating unit (Rubbered spreading roller diam. mm 250 (ca.) KW 0.75, with a rubbered bottom roller, counter-placed to the top one (diam. mm 182 ca., (ca.) KW 0,75)

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : e.g. Type Alphatec AD-.S 75 with: Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Throughput performance up to 1000 kg/h - depending on the material Drive 132 kW - 250 kW L/D Ratio - according to processing needs Degassing zones - as desired Side feeder type ZS-B - as desired OPTIONAL: > Melt filter/screen changer Bdjdpfei Dtbisx Amrsh > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs > Material dosing: volumetric or gravimetric > further accessories Visit us at our Wuppertal plant. Trail-run with your material-mix possible, darte and details uopn request.

Condition: used, BARMAG extrusion system consisting of: 1x extruder BARMAG KEP 200-26,3,3-S 1x transmission gear KNÖDLER FZ 6000 2_Z-ED 200 - NEW, year of manufacture 2016 1x drive motor SIEMENS 1GG6208 with external ventilation 470V, 468A, 206kw, 2600rpm, Err. 310V, 6.8A - NEW, year of manufacture 2015 1x control unit 1x dosing unit SCHOLZ incl. Feed hopper with level sensor - year of manufacture 2004 System features: - Single-screw extruder, year of manufacture ca. 1973 - Throughput 800kg/h - Conversion to new drive + gearbox in 2016 - Screw diameter 200mm - Screw length 5266mm - Process length 26.3D - Geometry: feed - barrier - mixing section - Screw material: nitrided steel - Technical documents Subject to prior sale Please send inquiries by email only Note: The machine is still installed and can be inspected on site. Bdjdpfxouak Nle Amrsh The buyer must dismantle it himself and organize shipping. This is not part of the offer price.

Condition: ready for operation (used), Year of construction: 2003, machine/vehicle number: 10362, Brand: Burkle Model: SLC Machine no: 10362-01 Year of manufacture: 2003 Technical data of the machine (BURKLE SLC) General data - Type: SLC - Working width: 1300 mm - Working height: 900 ± 20 mm Workpieces - Workpiece characteristics: Flat, self-rigid - Workpiece width (max): Working width - Workpiece width (min): 350 mm - Workpiece length: 3 - 100 mm - Tolerance of the workpiece height over the entire working width: - Single track operation: ± 0.5 mm - Multi-track operation: ± 0.2 mm - Workpiece weight (max): 250 kg Piling material Bdodpfx Amov Hn N Uoreh - Inspection material/cleaning agent with a self-ignition temperature: ≥ 200 °C Transport unit - Back pressure roller: See order confirmation - Rubber ring: See order confirmation - Diameter: 186 mm - Feed speed: 8 - 25 m/min Material circulation - Material pump feed capacity (double stroke): 575 cm³ Piling unit Piling roller - Rubber ring: See order confirmation - Diameter: 238 mm - Temperature (in case of optional heating/cooling application roller): Max 60 °C - Peripheral speed: Approx. 8 - 25 m/min Dosing roller - Diameter: 174 mm - Temperature (with optional heated/cooled dosing roller): Max 60 °C - Peripheral speed: Approx. 3 - 9 m/min Accuracy of application over the entire working width at: - Application rate > 10 g/m²: ± 5 %. - Application rate < 10 g/m²: ± 10 % Adjustment of the feed-through height - Feed-through height (max): 120 - 5 mm - Accuracy of setting: ± 0.1 mm Compressed air connection - Required air pressure: 6 bar - Compressed air consumption: Approx. 50 NI/min Dimensions / weights - Dimensions: See installation drawing - Weight at working width 700 / 1300 / 1600 mm: 1250 / 1450 / 1600 kg Electricity - Connection values, voltages: See data sheet for electricity Other information - Noise level: < 70 ± 4 dB (A) Table 1-4: Technical data for standard sizes of the machine (continued) Note: The speed is limited to a maximum of 20 m/min when the dosing roller and height setting are set to a safety distance exceeding 120 mm (cleaning coupling). Stock no: 2002443BXM

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Industrial spinning extruder from an Oerlikon Barmag production installation, suitable for polymer processing and nonwoven applications. 2 extruders are available for sale at the moment. The machine was manufactured in 2020 and has seen very little use. Machine details: Manufacturer: Oerlikon Barmag / BBE Engineering Bodpszulh Tsfx Amredh Type: 9E10/30D-HT Project: P13000 Year of manufacture: 2020 Application: spinning / polymer extrusion / nonwoven production Polymer configuration: PP Single-screw extruder Industrial heavy-duty design The original Barmag documentation identifies the unit as a “Spinning Extruder” and covers its operation as part of the complete production plant. The equipment includes the extruder with drive system, feeding/dosing equipment, electrical/control equipment and associated components as shown in the photographs. Components from well-known industrial manufacturers including Siemens, Flender, Nordson and Oerlikon Barmag are installed. The machine is currently still installed, which allows the buyer to inspect the equipment in its existing installation. Condition: Used, very low operating use Year: 2020 Availability: Immediately / by arrangement Location: Germany Extensive original technical documentation is available for the machine, including operating and maintenance documentation, drawings and information concerning the drive, gearbox, heating, cooling and electrical systems. The documentation also includes drawings and technical information concerning the extruder and its associated equipment. The complete PDF documentation with detailed technical specifications can be provided to interested buyers upon request. Additional photographs and information are available upon request. Worldwide inquiries are welcome.

Condition: like new (used), Automatic Onion Slicer – Stainless Steel Industrial automatic onion slicer, designed for continuous and uniform slicing of onions in professional vegetable preparation and processing lines. The equipment incorporates a feeding and transport system that allows onions to be guided in a controlled manner to the cutting area, reducing manual handling and providing a regular flow of processed product. Its construction primarily in stainless steel, longitudinal structure, and protected cutting area make it especially suitable for industrial installations where hygiene, ease of cleaning, and continuous production are required. MAIN FEATURES -Type: Industrial onion slicer -Application: onions -Automatic/continuous operation -Product feeding system -Controlled transport and positioning -Mechanical cutting system -Uniform and repeatable cutting -Protected cutting area -Electric motor drive -Construction primarily in stainless steel -Robust industrial structure -Safety guards on moving parts -Design for continuous production -Accessibility for cleaning and maintenance -Integrable into complete onion processing lines PROCESS Pre-prepared onions are fed into the feeding system and automatically transported to the cutting area. The system maintains the product in a controlled position during its advance and performs the cutting using the mechanical elements installed in the machine. Once processed, the onion is continuously discharged to the next stage of production. Depending on the tooling and cutting configuration installed, the equipment can be adapted to different product preparation needs. It can be integrated with: -Hopper and feeding systems -Onion peelers -Inspection belts -Washers -Conveyors and elevators -Subsequent cutting equipment -Cookers and scalding units -IQF freezing tunnels -Weighers and dosing units -Packaging machines APPLICATIONS Especially suitable for onion processors, frozen vegetable manufacturers, canning companies, IV/V range industries, prepared dish producers, and horticultural processing companies. It can be part of an automatic preparation line that includes feeding, peeling, inspection, cutting, washing, heat treatment, freezing, or packaging. Its industrial construction and continuous operation provide a solution for automating onion slicing, increasing product consistency, and reducing manual operations. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request. Bjdpfozrglnox Amrodh

Condition: used, Year of construction: 2011, Water treatment plant from Grünbeck for treatment of brewing and process water. Fully mounted on a stainless steel frame and controllable via Simatic S7-300. Reverse osmosis system for removing hardness compounds, salts, particles and micro-contaminants from water. This produces brewing water with the desired hardness. To protect the membranes, coarser particles are first removed in two fine filters (with pore sizes of 50 µm and 5 µm respectively). Desalination then takes place in two pressure pipes containing membrane modules. Includes sterilization filtration, membrane modules, chemical dosing, centrifugal pump, piping, valves, measurement technology, and control cabinet with touch panel. Additional title: reverse osmosis Permeate capacity: 8000 l/h ; Feed: 10000 l/h Bedpfx Amsz E Rv Uersdh Recovery: 80 % Concentrate: 2000 l/h Max. overpressure: 16 bar Power: 6.5 kW Voltage: 3 x 380 - 415 V Frequency: 50 Hz Water: feed 2.5 - 5 bar Length: 5000 mm Width: 1000 mm Height: 2000 mm Operation / Control: Simatic S7-300 Material: membranes from polyamid Base construction: on stainless steel frame with feet Features: 2 fine filters; pressure pipes with membrane modules; chemical dosing system with two dosing pumps; centrifugal pump (Lowara); various pipes, valves, and measurement equipment; control cabinet with touch panel

Condition: used, functionality: fully functional, working width: 850 mm, total height: 1,160 mm, total width: 748 mm, total length: 1,520 mm, noise level: 71 dB, battery capacity: 120 Ah, rotational speed (min.): 600 rpm, rotational speed (max.): 1,300 rpm, B 60 W BP DOSE (ROLLER) Walk-behind scrubber-dryer The B 60 W Bp Dose walk-behind scrubber-dryer is equipped with a drive motor, two maintenance-free 120 Ah batteries, and a user-friendly key system. This system enables simple and safe operation by controlling access and operating rights to protect against incorrect operation. The machine is ideal for cleaning textured floors and can cover areas of up to 2,500 square meters. The brushes can be quickly and easily installed and replaced. Thanks to the eco!efficiency mode, battery life is significantly extended, and the integrated tank rinsing system makes it easy to clean the dirty water tank after floor cleaning. Walk-behind scrubber-dryer (60 l) with drive unit. Ideal for 1000 - 2500 m². Energy-saving eco! efficiency mode Proven double disc technology ■ Brush heads can be quickly installed or replaced. Powerful drive motor ■ Comfortable driving with infinitely variable speed adjustment (forward and reverse). ■ Preset maximum speed. ■ Operation via drive levers directly on the handle. Bjdpfx Amjx Hvvzorodh With cleaning agent dosing system. ■ With on-board cleaning agent dosing. ■ Precise and even dosing (adjustable up to 3%). ■ No contamination of the tank, as it is only filled with fresh water. Technical data Power supply V / Hz 100 – 240 / 50 – 60 Working width vacuuming mm 850 Fresh/dirty water tank l 60 / 60 Brush speed rpm 600 – 1300 Brush contact pressure kg 37 Battery Ah 120 Battery type maintenance-free Battery charging time h 4.7 Sound pressure level dB(A) 71 Water consumption l/min 3.6 Drive type battery Drive traction motor Mains connection charger V / Hz 100 – 240 / 50 – 60 Dimensions (L × W × H) mm 1520 × 748 × 1160 Item condition: used, images may vary as there are multiple items available Quantity 1x Kärcher walk-behind scrubber-dryer B 60 W Bp Dose General signs of wear include all damage that can be expected due to age and mileage or operating hours. Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more cleaning machines – new and used – in our shop! International shipping costs on request!

Condition: refurbished (used), Year of construction: 2010, machine/vehicle number: R-00651, load capacity: 210 kg, arm reach: 2,655 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC R-2000iB/210F manufactured in 2010.06. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/210F Model Number: A05B-1329-B205 Year of Manufacture Robot: 2010.06 Warranty term (months): 12   Payload (kg): 210 Reach (mm): 2655 Repeatability (mm): ± 0.3 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1240   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2014.03 Bjdpfxoz E Utde Amrodh RCC Length (m): 14   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10