Used Ras 12.31 for sale (1,072)

Condition: like new (used), Year of construction: 2008, amount 1 STK Pjdsxgvzzepfx Ahcsra

Year of construction: 2019, condition: like new (used), Condition: As good as new Container has not been in use. Was ordered for a large project, but never put into operation. perm. operating pressure: 22 bar volume flow: 490 m³/h empty weight: 2100 kg refrigerant: R717 dimensions: 2.200 x 1.180 x 1.940 mm frequency converter: Danfoss VLT with 132 kW Accessories: 1 x blowdown tank Aprovis 18180678-MSK 3 x thrust drive ARI Premio Plus 2G 2.2 kN Pedpfx Ahok Sgwascsra 5 x gate valve Ari 1.0619N 3 x gate valve Ari JL1040 2 x shut-off valve KSB nw-6150BQ0465 3 x diaphragm valve KSB SISTO-16 TWA 1 x turbine volume measuring part / heat meter MWN130-NC 3 x KSB amri ACS 02ACCNY005 shut-off valve 3 x strainer ARI 6 x gate valve Ai Ziva-G 1.4581

Condition: like new (used), Number: 30206550 Operating hours: 4,686 h Performance: Internal dimensions: Dimensions: 1,300 x 900 x 1,450 mm Psdpfxoi Ra Tgs Ahcjra Height with frame: 2,100 mm Weight:

Condition: used, empty load weight: 5,160 kg, maximum load weight: 12,840 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2014, loading space length: 7,300 mm, loading space width: 2,490 mm, loading space height: 2,180 mm, suspension: air, tire size: 385/65R22.5, wheelbase: 5,020 mm, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, SAF axles, turntable, air suspension, lifting/lowering, ABS (anti-lock braking system), portal doors, side impact protection, side aluminum fender, swing-out side walls. Wheelbase: 5020 mm. Body: Orten turntable semi-trailer with swing-out side walls, type Kettliner-Light, with load securing system. 2x 10t SAF axles, disc brakes, chassis frame made of high-quality steel profiles in lightweight construction, floor made of 27mm screen-printed plywood, front wall made of aluminum profiles, double-leaf rear doors in aluminum, GRP roof with galvanized roof frame construction, sliding rear load securing system allsafe-Jungfalk "CRS", attachment device for accompanying forklift, loading height unladen approx. 1280mm, through-loading height on the side approx. 2180mm. Matching Scania beverage truck -83082- with the same body dimensions available at an additional cost! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors! Pedpfx Ahei Rmczecora

Condition: used, mileage: 122,565 km, power: 1,000 kW (1,359.62 HP), first registration: 01/2007, fuel type: diesel, color: white, axle configuration: 6x6, operation weight: 600,000 kg, empty load weight: 45,440 kg, driver cabin: day cab, gearing type: automatic, suspension: other, Year of construction: 2007, operating hours: 23,137 h, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, trailer coupling, Towbarless Push-Back: - Goldhofer - AST-1X 1360 - Year of construction 2007 - 122,565KM; 23,137 operating hours - 2x Deutz diesel engine TCD 2015 V08, 15,874cc each; 500kw - 1x Deutz BF4M1013C, 110kw (GPU) - Hydrostat (Vmax 32km/h) - Drive: 6x6 - additional GPU - Optional front-wheel, all-wheel or crab steering - StrobeLights - tows up to a maximum aircraft weight of 600,000KG (Airbus A380) - Swivel seat - Cabin can be raised and lowered - Climate control - Weight: 45.440Kg - 11.50m x 4.50m x 1.65m (lxwxh) - Machine is currently running in emergency mode for the following aircraft types: Boing: - B767-200...300 - B767-400 - B777 - B747 Prodpfeqxt N Uex Ahcsa Airbus: - A300/310 - A330-200...300 - A340-200...300 - A340-500...600 - A380-800...800F McDonnell Douglas: - DC-10 - MD-11 You can find a video of this offer on You can find our entire vehicle inventory at Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Year of construction: 2013, condition: like new (used), Termotec 850 cooling system for Heidelberg Suprasetter - Year of manufacture: 2013 - Like new condition - New generation Podpfod Rimijx Ahcjra

Condition: new, sheet length: 4065sheet thickness: 6,0total power requirements: 11weight approx.: 11150messurements (LxWxH): 4830x2955x2130 Prjdpfxjd Egqwo Ahcoa

Condition: new, sheet length: 6125sheet thickness: 20,0total power requirements: 45weight approx.: 55000messurements (LxWxH): 7200x3700x2780 Prsdped Ehhzjfx Ahcsa

Condition: new, overall weight: 400 kg, Uras 3-Head Large Format Printer Printing Machine 3 x 4720/3200i, 2400 dpi 3 Print Heads: 1800mm Thanks to the high-speed print heads featuring new technology, you achieve powerful results at low production costs with a print speed of 110 m²/hour in 2-pass mode. Pjdpsq Rd Nuofx Ahcera Highlights: - 3 x 4720/3200i Print Heads with 2400 dpi high resolution - 2-stage ink system (220 ml ink cartridge and 1.5 l ink tank) - Integrated housing heater, infrared heater, and fan system - Unwinding spindle to prevent paper bubbling - Printing up to 600 meters with tension rewinding system - 2-pass mode (360x1200 dpi) 110 m²/hour Product Specifications: - Print Heads: Piezo print head, 3 units (3200i/4720) - Media: - Width: 1820mm - Thickness: 1 mm or less - Weight: up to 60kg - Max. print width: 1800mm - Color unit: 4 x 220 ml cartridges and 1.5 l color tank - Print resolution: 2400 dpi - Print modes: - 2 passes (360 x 1200 dpi): 110 m²/h - 3 passes (360 x 1800 dpi): 84 m²/h - 4 passes (720 x 1200 dpi): 74 m²/h - Media drying system: Integrated housing heaters, infrared heaters, and fan system - Interface: USB 3.0/LAN - Power specification: AC 220V ± 10%, 50/60 Hz - Dimensions: 3190 mm (L) x 650 mm (W) x 1030 mm (H) - Net weight: 400kg Condition: Display item, very few prints. All information provided without guarantee. Financing through our bank is also available. komplett-konzept.leasingo.de More printers in different sizes – new and used – can be found in our shop! International shipping rates on request!

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 0G000072, The Frascold Q5-21.1Y compressor is a reliable, high-performance solution for a variety of industrial and commercial applications. With an impressive flow rate of 21.18 m3/h, this compressor guarantees efficient cooling and refrigeration processes. Whether you work in HVAC, cold storage or food processing, the Frascold Q5-21.1Y delivers exceptional performance. ➢Product highlights: ✓Powerful performance: The Q5-21.1Y boasts a maximum power consumption of 6.6 kW, making it a suitable choice for demanding applications. ✓Optimal Oil Management: With a 1.6-liter oil charge, this compressor ensures smooth operation and long service life. ✓Rugged construction: the Q5-21.1Y is built to last, with dimensions of 449 mm x 286 mm x 325 mm and a weight of 79 kg. Its solid design stands up to the rigors of industrial environments. ✓Versatile connections: The suction connection is 1 1/8", and the flow is 3/4", allowing easy integration into existing systems. ➢Specifications: Compressor Frascold Q5-21.1Y, discharge: 21.18 m3/h, maximum power consumption: 6.6 kW, oil charge: 1.6 l, connection: suction 1 1/8 inch, discharge 3/4 inch, dimensions (length x width x height) 449 x 286 x 325 mm, weight: 79 kg` Price without VAT. Prodpfx Aor Id Tqehcja

Condition: good (used), Year of construction: 2005, functionality: fully functional, cooling capacity: 350 kW (475.87 HP), type of input current: three-phase, overall weight: 1,930 kg, input voltage: 400 V, total width: 1,200 mm, total length: 3,600 mm, total height: 2,000 mm, AMMONIA CHILLER GEA GRASSO 350 KW Brand: GEA Cooling capacity: 350 kW Refrigerant circuit: 1 pcs. Type of refrigerant: R717 Year of manufacture: 2005 Prsdpfjim R A Iex Ahcsa Compressors: 1 pcs. reciprocating GRASSO Heat exchanger: Shell and tube Dimensions: 3.60 x 1.20 x 2.00 m Weight: 1930 kg Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Year of construction: 1996, condition: excellent (used), Grasso Screw Unit Amonia with 55 KW motor/3000rpm with oil cooler and control panel Cap.= 152,3 KW at -9C°/+35C° Flow rate= 321m3/h Compressor: ER-E36S-28 Prjdpfoip Uh Tox Ahcoa

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 11/2009, total length: 14,020 mm, total width: 2,600 mm, suspension: air, tire size: 385/65 R22.5, wheelbase: 8,980 mm, color: white, Year of construction: 2009, Equipment: tail-lift, Axle configuration Tyre size: 385/65 R22.5 Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Psdpfjuu Dx Rex Ahcora Rear axle 3: Max. axle load: 9,000 kg; Steered Weights Unladen weight: 10,880 kg Payload: 28,120 kg Gross vehicle weight: 39,000 kg Functional Tail lift: Dhollandia DHSM.30, fold-under platform, 2,500 kg Body brand: Carrier Vector 1850 Refrigeration unit: Diesel and electric Condition Damages: None Financial Information Price: On request Identification Registration number: OK-17-YF Further information Please contact Maurits Van Giessen for more information.

Condition: new, functionality: fully functional, overall weight: 1,900 kg, Year of construction: 2024, Introducing the Traserscreen DB-40LC – The Ultimate Screener for Unmatched Efficiency! Transform your material screening process with the Traserscreen DB-40LC. Engineered for excellence, this high-performance screener offers unparalleled durability, precision, and speed, making it the perfect choice for professionals in landscaping, construction, and agriculture. Key Features: Robust Design: Built to withstand demanding environments and heavy-duty use. Hopper width: 2657mm. Podpfx Ahot Ebphecora High Efficiency: Achieve faster, cleaner results with advanced screening technology. Screening 15-60t/h. User-Friendly: Easy setup and operation for maximum productivity. Weight 1900kg.

Condition: used, mileage: 539,800 km, power: 315 kW (428.28 HP), first registration: 08/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 7,000 mm, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, * Special equipment: Meiller RS21.70 roll-off tipper * Central lubrication system * Extendable underride guard * Power box * Stainless steel storage box * Rotating beacons * Steered, liftable, relieving trailing axle Podpsr Edy Uofx Ahcsra * Wheelbase 4900 mm * Engine-dependent PTO, rear output * Payload 14400 kg * Additional Duomatic brake connection * D40 trailer hitch * Rear view camera * Navigation system * 1 lower bed * Preparation for upper comfort bed * Auxiliary air conditioning * Hot water auxiliary heating * Euro 6c emissions standard * Active Brake Assist * Attention Assist * Lane Keeping Assist * Stability Control Assist * Refrigerator---- * Lockable storage compartment above the windshield * Front axle load 8.0 t * Ambient LED lighting * Work lights * Work lights on the upper rear wall of the cab * Bluetooth Comfort audio navigation system * Downward exhaust right, * Right exterior mirror with maneuvering position, * Standard and DuoMatic brake connection, * CB radio, * Driver's cab: width 2.50 m, * Suspension: 8.0 t front springs, 3 leaves, * Fire extinguisher, * Tinted windshield, * 10.4 cm information display, * Folding table in the parapet, * Automatic climate control, * 3-part fender, * Fuel tank: 390 L aluminum, * Cooler/refrigerator, * Roof air deflector (lockable, without base panel), * Steered trailing axle, liftable, * Parameterizable special module, * Frame lowering without bellows residual pressure control, * Reinforced end cross member, * Drawers under the parapet, * Circuit breaker, * Seats in the driver's cab: Comfort suspension seat, * Exterior sun visor, * Storage compartment on the left under the driver's cab, * 12V socket in the Passenger footwell, * Additional thermal insulation Other equipment: * Axle configuration: 6x2/4 * Actros 4, * 2-wire trailer brake, connections on the left, * 24V / 15-pin trailer socket, * Electric exterior mirrors. Adjustable and heated, * Rear axle differential lock, * Driver assistance system: Attention Assist (drowsiness detection sensor), * Driver assistance system: Active Brake Assist, * Driver assistance system: Lane Keeping Assist, * Driver cab: L StreamSpace, * Driver cab: steel suspension, comfort, * Suspension: leaf/air, * Electric windows, * 100 A generator, * 12-speed transmission - type: G 211-12, Power Shift * Urea tank (AdBlue): 60 liters, * Comfort locking system, * Communication interface, * Radiator shutter, * 2-stage air compressor, * Engine 10.7 liters - 315 kW R6 Diesel (OM 470), * Engine brake, * Engine compartment enclosure, * Trailing axle Single tires, * Ramp mirror, * Disc brakes on front and rear axles, * Seat cover/upholstery: fabric, * Seats in driver's cab: passenger seat, * Seats in driver's cab: foldable driver's seat backrest, * Voltage converter 24V / 12V 10A, * Front splash guard, * Front axle stabilizer, * Rear axle stabilizer / trailing axle, * Outside left storage flap, * 24V cab socket, * Tachograph / EC control unit, * Door extension for driver's cab, * Aerodynamically shaped underbody paneling, * Front underride protection, * Toll collection preparation, * Offset front axle, * Regulated water pump, * Gross vehicle weight 26.00 t, * and much more. !!! Errors, changes, and prior sale reserved!!!

Condition: new, Year of construction: 2023, Automate your cleaning process with devices from the Superior series: lifting device with a support grid for effortless handling of parts, filter systems for dirt separation, an exclusive oil separation system (OPS), and an intuitive touch panel. Standard models are available from 150 L to 8000 L. TECHNICAL CHARACTERISTICS External dimensions of the machine: 2,140 x 1,540 x 1,720 mm Internal dimensions of the tank: 1,300 x 794 x 670 mm Usable dimensions of the parts grid: 1,270 x 685 x 470 mm Maximum load: 400 kg Height of the worktop: 980 mm Tank capacity: 692 L Power of the ultrasonic generator: 4,800 W Ultrasonic operating frequency: 28 kHz Heating element: 12 kW Pedpfx Ahof E Nt Djcera

Condition: used, Year of construction: 2019, * FAE Stabi FRS250 soil stabilization milling machine * Year of manufacture: 2019 * For tractor with 300 - 400 hp * PTO: 1,000 rpm * Working width: 2,560 mm * Overall width: 2,990 mm * 6,500 kg Psdpfjzax Uxsx Ahcora * Rotor: 1,085 mm * Max. working depth: 500 mm

Condition: new, mileage: 6 km, power: 132 kW (179.47 HP), fuel type: diesel, overall weight: 3,500 kg, color: grey, gearing type: automatic, emission class: euro6, number of seats: 3, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, Opel Movano AKX 180 hp, 3-seater, automatic, NEW MODEL 1-2 horse transporter, HARAS – stallion equipment Special offer price ///immediately available/// Vehicle: * 180 hp chassis, EURO 6 * Leather interior * Seat heating * Air conditioning * 3 seats * Radio-CD-navigation * Bluetooth hands-free system * Trailer hitch * Cruise control * Multifunction steering wheel Horse compartment: * Soft rubber flooring * COMPLETE STALLION EQUIPMENT with high partition, separate doors in front of each horse * Partition completely adjustable for e.g. mare + foal * Roof fan * Roof hatch * LED day/night light * Closed storage boxes in the alcove * Saddle and bridle rack * Saddle room with storage compartments * 4 shelves on the left Available as optional equipment: * Camera system, reversing and horse monitoring camera €1,500 * Automatic transmission €2,000 * Alloy wheels €1,250 * Additional coil springs * All-season tires * Shelf system in the saddle room Pjdpfx Ahszh Twcjcera Errors/input errors and prior sale are subject to change. More pictures available upon request. * EXPORT NET PRICE POSSIBLE * Top leasing offers Location and viewing of our vehicles: STX HORSETRUCKS GERMANY Hamburgerstrasse 65 23816 Leezen Sales and service of all brands in the field of horse transporters and trailers. Please arrange an appointment in advance. Contact Richard Theurer, Andreas Theurer, Axel Fröhle

Condition: ready for operation (used), Year of construction: 2009, operating hours: 16,616 h, travel distance X-axis: 120 mm, spindle speed (max.): 36,000 rpm, number of axes: 5, This 5-axis DMG Sauer Ultrasonic 10 + PH 2 | 120 was manufactured in 2009. It features a main drive speed of 40,000 rpm and an output performance of 6 kW. The machine operates efficiently with a cooling system and has a protection type of IP 54. If you are looking to get high-quality ultrasonic machining capabilities, consider the DMG Sauer Ultrasonic 10 + PH 2 | 120 vertical machining centre we have for sale. Contact us for further details. • Manufacturer: SAUER GmbH Ultrasonic • Component: Main Drive, 40,000 rpm • Operational mode: S1 • Speed 1: 36,000 rpm • Speed 2: 42,000 rpm • Output performance 1: 6 kW • Output performance 2: 6 kW • Torque 1: 1.7 Nm • Torque 2: 1.3 Nm • Voltage 1: 400 V • Voltage 2: 420 V • Current 1: 10 A • Current 2: 9 A • Frequency 1: 1,200 Hz • Frequency 2: 1,400 Hz • Connection: Star • Protection type: IP54 • Vibration quality: < 1 mm/s • Cooling: Water • Rotor moment of inertia: 0.000252 kg·m² • Insulation class: F Prsdoy Hhwkopfx Ahcsa • Connection diagram: 635 • Max. ambient temperature: 40 °C • Thermal protection: KTY 84-130 and PTC

Condition: new, mileage: 6 km, power: 125 kW (169.95 HP), fuel type: diesel, overall weight: 3,500 kg, color: grey, gearing type: automatic, emission class: euro6, number of seats: 3, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, Renault Master 170 HP Euro 6D STX 3-Seater NEW MODEL 1-2 Horse Transporter HARAS - Stallion Equipment Automatic ///available immediately/// Vehicle: * 170 HP Renault Master chassis EURO 6 * Leather interior * Heated seats * Air conditioning * 3 seats * Radio-CD-navigation * Bluetooth hands-free system * Tow bar * Cruise control * Multifunction steering wheel Horse compartment: * Soft rubber flooring * COMPLETE STALLION EQUIPMENT with high partition wall, separate doors in front of each horse * Fully adjustable partition for e.g. mare + foal * Roof-mounted fan * Roof hatch * LED day-night lighting * Enclosed storage boxes in the alcove * Saddle and bridle holders * Tack room with storage compartments * 4 shelf tiers on the left Available as optional equipment: * Camera system, rear-view and horse monitoring camera €1,500 * Alloy wheels €1,250 * Additional coil springs * Winter tyres €800 * Shelving system in tack room Errors/mistakes & prior sale reserved. Further photos available on request. * EXPORT SALES POSSIBLE NET OF VAT * Top leasing offers Location and viewing of our vehicles: STX HORSETRUCKS GERMANY Hamburgerstrasse 65 23816 Leezen Sales and service for all makes in the field of horse transporters and trailers. Prjdpey Dm Ipsfx Ahcsa Please arrange an appointment in advance. Contact: Richard Theurer, Andreas Theurer, Axel Fröhle

Condition: ready for operation (used), SEV AT/MT1090-100 milling motor with collet chuck, serial no. 03102988. The plastic insert of the connection socket is slightly damaged, see photo. Used, with normal signs of wear, 100% functional. Scope of delivery as shown in the photos. Pedpekxh Ayefx Ahcera

Condition: excellent (used), functionality: fully functional, Granite Plate - Dimensions 1200x910x200mm - Quality appx. Class 0 or better (will be checked) - incl. different taper inserts - frame on demand Pjdpfstcrk Tex Ahcera Was a former base for a Zeiss rotary table RT05/800

Condition: excellent (used), functionality: fully functional, total height: 180 mm, total width: 800 mm, total length: 1,200 mm, Granite Plate Prsdot Rfmnopfx Ahcea - Dimensions 1200x800x180mm - Quality appx. Class 0 or better (will be checked) - incl. stainless steel angle selectable - incl. 3x ball feet - Aluminum frame (additional € 500,--)

Condition: good (used), Year of construction: 2006, machine/vehicle number: PL001240, Thermal CTP (Computer to Plate) Throughput option (plates/h in max. format) : 14 Plates / Hour Min. Plate Format : 370 x 323 mm Maks. Plate Format : 930 x 1140 mm Plate Thickness : 0,15 - 0,3 mm Technical data can vary according to job, consumables and possible other factors Predjfmmyzjpfx Ahcja

Condition: new, The Holzprofi RAS200Best radial arm saw features a compact design for space-saving use in smaller workshops. It is suitable for straight (90°), mitre (0° to 45° left) and bevel cuts (45° left and right) on wood-based panels and solid wood up to 3 m in length. Ideal for use in furniture production and carpentry. It is particularly user-friendly and a versatile addition to the sliding table saw for precise cutting work. Psdpfx Ahox H Uk Dscjra Advantages and features: - Versatile: Swivel arm up to 45° to the left and right and tiltable cutting head (0° to 45° to the left, infinitely adjustable) enable a wide range of cutting operations and maximum flexibility. - Safe: Noise-reduced full cover of the saw blade with safety switch, kickback protection, generously dimensioned work table and emergency stop button ensure optimum protection during operation. - Robust: Sturdy steel construction with cast iron arm and base frame. Guides made of hardened, replaceable steel. - Precise: Cutting head runs on 8 ball bearings – for smooth, precise and effortless movement. Delivery without saw blade Technical specifications: Saw blade diameter 565 mm Speed ?? 2800 rpm Saw arm rotation +45° - -45° L 45° 280x200, R 45° 470x200 Saw head tilt 0 - 45° Cutting height at 90° 200 mm Cutting height at 45° 135 mm Cutting width 850 mm Table size 1970 x 1285 mm Motor power 5.5 kW S6 (4.5 kW S1) 400 V Weight 360 kg Desired equipment: Laser