Used Pmh Gmbh Ha10 for sale (69,589)

Condition: excellent (used), Year of construction: 2007, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Travel: X axis: 600 mm Y axis (changeover position): 600 (975) mm Z axis: 500 mm Control: Siemens 840D control, side-mounted Feed/Rapid traverse speeds: X, Y, Z: 1 – 45,000 mm/min Max. feed force X, Y, Z: 15,000 N Average acceleration: X, Y, Z: 2.5 m/s² Measuring system: Direct measuring system X, Y, Z Spindles: Spindle speed (infinitely variable): 20–10,000 rpm Torque: 2 x 363 Nm (S6/40% duty cycle) Power: 2 x 38 kW (S6/40% duty cycle) HSK-A 100, horizontal tandem arrangement Spindle distance: 600 mm Spindle bearing diameter: 100 mm Motor spindles, liquid-cooled, AC technology Working area: Swing carrier with spur gearing, max. workpiece weight 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec Iijdpfx Aaszhlfrs Eod 2 NC rotary tables, hydraulically clamped, max. workpiece weight 700 kg, table speed 25 rpm Partition between machining and loading area Tool magazine: 2 x 50 tools HSK-A 100 chain-type magazine Tool change time (chip-to-chip): 4.48 sec Max. tool diameter: 100 mm 250 mm with adjacent slot free Max. tool length: 420 mm Max. tool weight: 20 kg Equipment: Central lubrication Oil minimum quantity lubrication (spindle lubrication) Chip conveyor (hinged belt conveyor) Coolant purification with compact band filter Hydraulic unit Maintenance unit Water recooler Full enclosure, crane loading possible Dimensions: approx. 5.15 x 8.50 x 4.20 m Weight: approx. 20,000 kg Year of manufacture: 2007 Other features: Very good condition Setup parallel to main time Available from December 2023/January 2024

Condition: good (used), Converter, power supply, power supply unit -Manufacturer: NorthTec GmbH -Type: VCC 3 -Number: 1x available -Price: per piece -Dimensions: 440/255/H135 mm -Weight: 3.1 kg/piece Iedpfjffwpajx Aa Eoid

Condition: used, Pressure intensifiers, pressure medium converters, flow control valves -Operating pressure ranges -Hydraulic part (power part): 2 - 32 bar -Pneumatic part (control part): 3 - 10 bar -Volume flow: max. 16 l / min. at (6 bar inlet pressure, load-dependent) Iiedpfx Aed Al Hmoa Eod -min.: 2 cc/min. (Hydraulic oil with a viscosity of 21 mm³/s [3°E] at 50 °C) -Screw connections hydraulic side: G3/8 pneumatic side: G1/8 -Dimensions: 140/70/H68 mm -Weight: 1.1 kg

Year of construction: 2005, condition: good (used), machine/vehicle number: 815 1015 1794, Manufacturer: CFS Germany GmbH Type: JuniorPak M420 Year of manufacture: 2005 Voltage: 400 V Phases: 3-phase + N + PE Current: 29 A Power: 20 kW Frequency: 50 Hz Weight: 2200 kg This is a thermoforming machine (deep-draw machine) for the production of vacuum-packed or MAP-packed food. It is designed for medium-sized production lines and is often used for meat, cold cuts, cheese, fish, and ready meals. How the JuniorPak M420 works 1. Bottom film feeding A roll of plastic film is mounted at the rear of the machine. The film is drawn forward using conveyor chains with grippers. Common materials: APET/PE PA/PE PP PET barrier film 2. Heating The bottom film enters the heating zone. Here, the plastic is heated to approximately: 90–140 °C, depending on the material type. The temperature is controlled by electric heating plates. 3. Deep drawing This is the machine's most important process. The mold closes. Then, usually: vacuum is applied under the film compressed air is applied above the film, if required the film is drawn down into the mold The result is finished plastic containers or trays. The forming depth is determined by the mold. 4. Filling zone After forming, the process stops. Operators or automatic equipment place the product in the trays. Examples: meat burgers bacon Iiedpezka Rujfx Aa Esd cheese fish 5. Top film A new film is fed in from above. This lies over the product. 6. Vacuum/MAP The sealing chamber closes. The machine can: create a vacuum flush with gas seal directly In MAP, the following are often used: CO₂ N₂ O₂ The gas mixture depends on the product. 7. Sealing The top film is sealed to the bottom film. Sealing occurs with: temperature pressure time These three parameters are crucial for a tight seal. 8. Cutting The cutting tool cuts each individual package. Excess film is transported out as scrap. 9. Ejection Finished packages are transported out onto a conveyor belt. They can then: be labeled be weighed be checked with a metal detector be packed in boxes A JuniorPak M420 normally consists of: Frame made of stainless steel Film transport with chains Heating station Forming station Filling zone Vacuum/MAP chamber Sealing tool Cutting tool Ejection conveyor Vacuum pump Pneumatic system Hydraulics (on some models) PLC control with HMI Typical technical data For the M420 series, typical values are: Maximum film width: approx. 420 mm Forming depth: up to approx. 100–120 mm, depending on the tool Cycle time: 5–15 cycles/min Capacity: from a few hundred to several thousand packages/hour, depending on the product and tool Connection: 400 V 3-phase Power: 20 kW (as shown on the nameplate)

Condition: excellent (used), functionality: fully functional, Low-speed shredder Cutting width – 150 mm Motor power – 2.2 kW Rotor speed – 200 rpm Number of rotor blades – 9 pieces Number of stator blades – 2 pieces 4 units available, in perfect condition Capacity up to 25 kg/h Price: 1200 EUR per unit Iodpfxeyf I N As Aa Esid

Condition: excellent (used), functionality: fully functional, Low-speed machine with gearbox Iijdpsyf I Tbjfx Aa Ejd Cutting width – 250 mm Motor power – 3 kW Rotor speed – 100 rpm Number of rotor blades – 20 pieces Number of stator blades – 2 pieces 6 units available, in perfect condition Capacity up to 50 kg/h Price: 1550 EUR per unit

Year of construction: 2011, condition: ready for operation (used), The ultrafiltration system is used to purify various liquids. The membrane elements feature a 37/3.8 channel design, a pore size of 0.1 µm, and a length of 1300 mm. Each of the two modules contains 32 ceramic rods, with a total capacity of 2,000 L/h per module. 1 structural frame, 1 feed pump, 1 rod heater, Iijdpfx Aasf Dc D Ho Eed 2 bleed pumps, 1 cleaning tank, 1 membrane valve, 1 compressed air membrane pump, 1 UF ceramic module, 1 temperature monitoring unit, 1 control valve, 4 pressure gauges with display, 1 control unit compliant with VDE 0110/0113 CE, 1 flow meter, 1 pre-assembly of the system at the supplier's factory.

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: SPE-Spero QTX-340, The device was used for research purposes. SPE-Spero QTX-340, MIR microscope with 'Hyper Spectral Imaging' capability. Spectral coverage of the fingerprint region (1900 - 950 1/cm). High-Resolution IR Objective: 12.5X; NA: 0.7, 650μm FOV. Enhanced LowMag Lens Visible: 4.0X; NA: 0.13, 650μm FOV. 480*480 pixels, Broadband Microbolometer Camera, Visible camera. QT-Laser-Performance-Package including high precision automated stage (< 1μm repeatability). High-speed data acquisition, joystick, control computer, Win10. 'Discrete Frequency IR Imaging' in real time. Transmission and reflection mode. 4000 hours laser active time. Iodpfx Aey Dcd Hea Esid

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: SPE-Spero-LTX-340, The device was used for research purposes. SPE-Spero-LTX-340, MIR microscope with "Hyper Spectral Imaging" function; spectral coverage (1900 to 950 1/cm). Enhanced LowMag lens 4.0X; NA:0.3, 2.0mm FOV. Dedicated IR-transmission mode. Broadband 480*480 pixel microbolometer camera, including high-precision automated stage ( Isdpfxeyxc Twe Aa Eoid

Condition: new, functionality: fully functional, Year of construction: 2026, New machine Vertical broaching machine VADARI GmbH TYPE SRM 2027-60 KN - 90 KN or 120 KN also possible! BROACHING MACHINES MADE IN GERMANY. Note: The machine can also be offered in a version with a tensile force of 90 KN (9 tons) or 120 KN (12 tons). ==> Information for manufacturing companies or dealers with their own production: If desired, the drawings, rights, spare parts, customer and prospect data, planning and production documents (including plans for a version with a 9-ton tensile force) of the broaching machine can be purchased from us. Please contact us if interested. ==> The new machines are manufactured by us to order. Short-term production and delivery are possible. ==> Spare parts such as spindles and spindle nuts for Wolff SRM and VADARI SRM broaching machines are currently available for immediate delivery. Cost-effective and extremely robust vertical broaching machine for long-term use. Broaching tools (including special broaches for internal gearing, etc.) and accessories are available. Please request a separate quote. All broaching tools and tool holders from other manufacturers can be used with our broaching machine! Complete manufacturing and assembly at our factory in Germany. Furthermore, we also offer spare parts for Wolff and VADARI SRM broaching machines (spindles, spindle nuts, motors, gears, and all other required components - including electrical components). Vertical broaching machine Type SRM 2027 - NEW MACHINE: 60 KN version: Isdpfxsuqbnhe Aa Ejid The application range is mainly in the production of keyway grooves from 3-28 mm (but also larger) and profiles of similar dimensions. The compact and space-saving machine can therefore be successfully used in small, medium, and large companies. The low price justifies the purchase even for small series and individual production. The drive is via a pole-reversible gearbox brake motor. The maintenance-free double-spindle drive ensures smooth operation and a central tension point, as well as constant cutting performance. The free tool table allows large workpieces to be placed without hindrance. In most cases, the workpieces to be broached do not need to be firmly clamped. Stroke adjustment is carried out by adjustable limit switches with stroke limitation. With short hubs/workpieces, several workpieces can be placed on top of each other. Broaching tools, mandrels, and spare parts are available upon request. Technical data: Tensile force: 60 KN at 3m/min. 40 KN at 6m/min. Broaching speed: 3m/min + 6m/min. (Optional: stepless speed adjustment (from 0 m/min to 6m/min) possible with extended electronics) Return speed: 6m/min. Stroke: 1050 mm Broaching tool length: 1200 mm Workpiece diameter: any Work table: 450 x 350mm Table opening: 140 mm Weight: approx. 510 kg Footprint: 750 x 570 mm Overall machine height: 1510 mm Drive power: 3.7 / 4.4 KW Electrical equipment: 400 / 230 Volt 50 Hz Control voltage: 230 Volt Operating voltage: 400 Volt 50 Hz Paint finish: Exterior RAL 7035/7036/7016, Interior RAL 3000 Safety door: Standard equipment Coolant system: Standard equipment The machine complies with the current Machinery Directive and has the CE marking.

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, The offer includes a used G2000 bun production line with a Mini Rex Futura divider-rounder from 2009. It is designed for the production of: • round, marked buns • elongated, unmarked buns • cut buns • twisted buns • Kaiser rolls Iiodpfxjy And No Aa Eed • hot dog buns • Poznań-style buns Product description: • Fully automatic and compact bun production line • Based on a Mini Rex Futura divider-rounder from 2009, which is rotary • 2-row operation • Manual removal of products from the discharge conveyor • Marking station with easily replaceable tools; includes heads for: Kaiser rolls and Korinsky buns • Integrated elongation and flattening unit • Weight range: - for marked buns from 25g to 75g dough piece weight – output: from 1,800 pieces/h to 2,640 pieces/h, - for unmarked buns 80g - 125g dough piece weight – output: from 1,800 pieces/h to 3,960 pieces/h. • Fermentation time: approx. 6 minutes at an output of 2,000 pieces/h • Dough types: wheat, whole wheat, yeast dough, donuts. • Single-person operation The machine is in the final stage of renovation. The attached photos show its current, actual condition. If you are interested in the price and would like to see more photos, please contact us.

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer. Iiodpjzizkysfx Aa Ejd

Condition: used, Year of construction: 1997, functionality: fully functional, compressed air connection: 6 bar, We are offering this used runner machine, model KA 2000/1, manufactured in 1997, for sale. Manufacturer: Weimer Maschinenbau GmbH Type: KA 2000/1 Year of manufacture: 1997 Serial number: 50700788 Country of manufacture: Germany The dimensions of the boards and blocks are as follows: Runner board length min. 700 mm, max. 1600 mm Runner board width min. 60 mm, max. 150 mm Blocks min. 60 mm, max. 150 mm Nails min. 25 mm, max. 110 mm Iedpfx Ajzixu Aea Eeid Up to 3 blocks can be used per runner. The machine was overhauled by Weimer in 2018 and equipped with a safety system including a fence. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2002, Rico Unpacking System Varia with S7 control The machine is dusty but in good condition. Iiedpfx Aajziwyqs Esd

Condition: excellent (used), Year of construction: 2019, Pack-Tec inline palletizer, year of manufacture 2019 Handles 6, 12, and 20 crates. Requires minimal floor space. Ijdpfx Aasziwx Hj Esid

Year of construction: 2026, condition: new, functionality: fully functional, Conical laboratory single-screw extruder EX 60/30 The extruder is designed for processing light, free-flowing granular materials. Due to its screw size, the extruder is suitable for laboratory and testing applications. The nitrided screw with a conical inlet section is fed with materials via a hopper, which then flow through the large inlet opening into the cylinder. Subsequently, the raw materials are compressed in the cylindrical screw section and discharged through a die. Iiedezhamwopfx Aa Eed A direct drive with an upstream thrust bearing forms the drive train. Ceramic heating bands also allow for high processing temperatures. A shielding cooling system is installed between the material hopper and the first heating zone. Optionally, we also offer the following machines: The strands are passed through a water bath with a stainless steel tank to the strand granulator. A screen changer can also be offered as an option between the extruder and the die. Screw speed 150 Current 29.5A CEE-63A

Condition: used, KB Prüftechnik Hardness Testing Machine, Type: KB 750 BVRZ Machine Type: KB 750 1 kg - 750 kg UNIVERSAL DIGITAL KB universal hardness testing machines for automatic and standard-compliant hardness testing. Suitable for all hardness testing methods in the load range HV 0.2 1 - 3000 kgf, Vickers, Brinell, Rockwell, Super-Rockwell, Knoop (only HK 1), ball indentation hardness (plastics) and depth measurement according to Vickers and Brinell. Fully automatic testing sequence, evaluation of the indentations on the integrated LCD monitor using an integrated video camera and zoom lens guarantees the highest evaluation accuracy according to the standard. All hardness values are displayed digitally immediately. User-friendly and powerful control panel with a color LCD monitor, high contrast and glare-free. The measurement of the indentation is performed without parallax. The testing forces are electronically controlled and applied with the highest precision. The video image can optionally be output as a BMP file. All KB hardness testing machines are supplied with a basic equipment package that enables immediate operation with the ordered indenters. A selection of fixtures, testing tables, indenters, lenses, hardness comparison blocks, etc. is available. A connection to a PC or central computer is possible with all KB hardness testing machines. In conjunction with the fully automatic software and motorized cross table, the machine can be operated as a fully automatic system. fully automatic testing sequence optical evaluation via integrated video evaluation extremely user-friendly and powerful large LCD color display industrially designed foil keypad variable software adaptation Zoom lens 1:7 parallax-free measurement load cells, controlled load application, LED lighting Rockwell resolution 0.025 HRC extremely powerful 200 freely definable test programs Calibration machine accuracy (option) new LED ring light (option) automatic image evaluation (option) 2 interfaces parallel + serial, as well as keyboard connection extended load range XL (option) freely switchable language selection German, English, French, Italian KB750 BVRZ: Test load 3-750 kgf Iijdpfezg Tyuox Aa Eod Brinell ISO 6506 HB depth measurement Vickers ISO 6507 HV depth measurement Rockwell ISO 6508 Rockwell ISO 6508 Superrockwell Testing table ∅80 mm Motor zoom 1:7 Lens 4x for HV10-HB5/750 NOT suitable for HV5 Operating function: Programmable digital panel with the following functions: Measurement of the hardness indentation on the LCD display, with adjustable measuring marks, without parallax Logically structured, simple operating guidance Any number of test programs can be created and stored (200) Automatic force selection by selecting the testing method Freely selectable application times of the testing forces Freely selectable dwell times of the testing forces Online help Automatic correction for curved surfaces according to DIN EN ISO Control of the fully automatic testing sequence Direct, digital hardness value display Tolerance display Conversions according to DIN 50150 Table B1 Protocol generation in DIN A4 format with standard printer via parallel interface Serial interface for data output to PC Optional network 4 languages: German-English-French-Italian Statistics functions, such as: Number of tests Min / Max Average Range Standard deviation cp / cpk Histogram (Changes and errors in the technical data are subject to change!)

Condition: ready for operation (used), Chip Conveyor, Screw Conveyor, Double Screw Conveyor, Used Machine Manufacturer: Ventilatorenfabrik Oelde GmbH Overall dimensions: Width: 9460 mm Depth: 1340 mm Height: 2300 mm Trough dimensions: 8830 × 900 × 340 mm Iisdpfx Aoy H I Uisa Ejd Feed opening: 1230 × 1200 mm Discharge opening: 730 × 535 mm Electrical data: 400 V Double screw conveyor system.

Condition: used, Oil Mist Extractor, Emulsion Mist Separator, Used Machine Manufacturer: IFS Industriefilter Service GmbH Type: IFM 2000 Overall dimensions: Width: 1170 mm Iodpfsyn Rmiex Aa Eeid Depth: 700 mm Height: 1100 mm Weight: 136.5 kg Year of manufacture: 1995 Electrical data: 400V, 1.5 kW, 3.2 A Filter size: 605 x 615 mm

Condition: good (used), Manufacturer: Rhein-Nadel Automatisation GmbH Type: SRC-N 630-1 R Vibration frequency: 50 Hz/3000 min -1 Electrical power: 220 V Iiodpfxegth U Ie Aa Ejd Drum diameter: 900mm Adjustable vibration

Condition: good (used), Manufacturer: Bühner Schaible Elektronik GmbH Type: th 15 / S2 Electrical data: 230 V / 50-60 Hz / 6A Diameter: 900 mm Iedpfx Ash Dimnja Esid

Condition: good (used), Year of construction: 2003, Filter rinsing tank Filtering takes place through an internal filter unit - Manufacturer: Atlantik GmbH Iodpfxoiw Eafj Aa Eeid - Model: 30.701.31.15100 - operating pressure: 10 bar - filtered grain size: 6.0 µmm (micron mm) - Overall dimensions: 1050 x 1150 x 1620 mm - Capacity: 425 L - Electrical data: 250V, 5A, 50/60Hz - Year of manufacture: 2003

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-062, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system). 2 cutting bridge with 2 cutting heads Iijdpewrn Iyofx Aa Ejd including Z-axis 1 head 2D cut 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. used high-pressure pump BFT Ecotron 40.22 (650 operating hours) (Product photo as an example) The machine is CE-certified.

Condition: used, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2026-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade Iiodpfx Aowgc I Rea Eod • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: new, MyEnergyBox – The turnkey energy storage solution for businesses and municipalities, as well as private households with electric vehicles. Do you want to reduce your energy costs, minimize peak loads, and become more independent from the power grid? With MyEnergyBox, you receive a completely pre-assembled and ready-to-use energy storage solution for commercial, industrial, agricultural, hotel, municipal, residential, and energy-intensive operations. Your advantages: ✅ Reduce electricity costs – up to 50% depending on the application ✅ Reduce peak loads (peak shaving) ✅ Optimize self-consumption of photovoltaic systems ✅ Emergency power supply in case of power outages ✅ Connection of e-charging stations possible ✅ Expandable and modular design ✅ Safe LiFePO4 battery technology ✅ Integrated climate control ✅ Robust steel container design ✅ Delivered ready to use Iedpfeziuzxex Aa Eeid Ideally suited for: - Industrial companies - Production facilities - Agriculture - Hotels - Municipalities - Swimming pools - Cold storage facilities - Logistics companies - Car dealerships - Operators of e-charging infrastructure Technical data and prices, see attached images.