Used Pma Signal Converter for sale (4,755)

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS02, LYBRA Easy OPRS / 6 Programs The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display Cedpfxez Irx Ne Afgshc - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Condition: used, mileage: 32 km, power: 100 kW (135.96 HP), first registration: 10/2026, fuel type: diesel, overall weight: 3,250 kg, color: black, gearing type: automatic, number of seats: 9, total length: 5,050 mm, total width: 2,275 mm, total height: 2,005 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, soot filter, Internal Number: 4365.NW25.SD34547 Errors and omissions excepted! ---- SPECIAL EQUIPMENT * 3 USB ports for the 2nd row of seats * Trailer hitch, electrically pivoting * Roof rails, black * Windows, 2nd row: Opening windows in the side panels * Ford Key Free System - incl. Ford Power Start function * Interior mirror with full-screen display, digital rearview mirror incl. dashcam * Rear air conditioning * Fuel tank 70 l * Charging station, inductive, for mobile devices - according to Qi standard * Sliding door with power assist - supported manual closing of the sliding door * Sliding door, right and left * Technology Package 5: Exterior mirrors, electrically adjustable, heated and foldable - Audio system with 13-inch multifunctional display, Ford SYNC 4 incl. navigation - Blind Spot Assist incl. CTA, rear cross traffic alert - Pre-Collision Assist, camera- and radar-based - Driver fatigue warning system - Lane Keeping Assist, Lane Departure Warning, Lane Change Assist - Lane Keeping System - Traffic sign recognition - Wrong-way driver warning function - Park Pilot system, front/rear - Adaptive cruise control with Stop & Go function - Intelligent speed limiter with speed limit display - Rearview camera - Steering wheel in Sensico leather-look FURTHER EQUIPMENT * 2 grab handles on the driver and passenger side * ABS * All-wheel drive * Floor covered with rubber, full vehicle length * Roof console * Double-wing rear door * ESP - Hill Start Assist - Safety Brake Assist - Traction Control * Power windows, front - with quick-up/down function for driver and passenger * Parking brake, electronic * FordPass Connect - WLAN hotspot, 5G modem (up to 5G/LTE, for up to 10 mobile devices) * Windshield, heated * Glove compartment with lockable lid * Rear window, heated - fixed * Interior lighting in the passenger compartment * Interior lighting, front Cjdpfox I T Rrsx Afgjhc * LED headlights - LED high beam - LED low beam - LED daytime running lights incl. integrated LED turn signals, front - Cornering light, static - High beam assistant * Center console, small * Driver fatigue warning system * Emergency call assistant eCall emergency call system * Park Pilot system, front and rear * Particle filter: Diesel particulate filter (DPF) with SCR catalytic converter * Radio accessories: 10 speakers * Tire repair kit * Tire pressure monitoring system * Wheels: Alloy wheels 6.5 J x 16, in Trail design - with double spokes, in Matte Black * Gear lever on the steering column * Windshield wipers with rain sensor * Mud flaps, front and rear * Side windows, fixed, second and third row, right and left * Side sills, black (plastic), with silver-colored insert * Power steering * Seat belts, front * Seats: Rear seat package 3 - 2nd row with 3 individual seats - 3rd row with 3-seater bench * Seat package 36: Driver's seat, 4-way manually adjustable - Double passenger seat, fixed - Headrests for driver and passenger - Tray on the passenger seat (fold-out) - Seat heating for driver and passenger (outer seat) - Driver's seat, with adjustable inner armrest - Lumbar support for driver - Airbag, passenger side, head-shoulder airbags, front and side airbags - Feeltek synthetic leather upholstery, Trail * Start-Stop system * Socket: 12-volt connection in the passenger compartment * Rear bumper - black (plastic) with silver-colored insert * Front bumper - in Trail design, partially painted in body color, with silver-colored insert with accents in Signal Yellow * Trail lettering in accent color Signal

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS03, LYBRA Easy OPRS / 6 Programs With automatic cord formation to reinforce the winding in various steps on the pallet. The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) Cjdpfx Aez Ir Hajfgjhc - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Condition: used, Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller -Manufacturer: RAM, temperature controller type 320.012 -Temperature range: 30 to 130 °C -Quantity: 2 controllers available -Price per piece -Dimensions box: 90/80/H50 mm Cedpsr Im Scefx Afgshc -Weight: 0.2 kg

Condition: new, Year of construction: 2026, Efficient and precise CNC CORMAK C1325 BSP milling plotter, equipped with SERVO drives as standard, has a structure made of steel and cast iron, which ensures adequate rigidity and resistance to overloads arising during operation. It is designed for processing and cutting wooden materials, chipboards, MDF, OSB, plywood, PVC, plexiglass and dibond. For each machine, training is included in the price at our headquarters! Construction Welded steel rigid structure, The arms of the gate are made of hardened, thick, powder-coated sheet metal, which has increased stiffness, which translates into the quality of the processed detail. Workbench The work table was made in hybrid technology, It has T-slots for manual clamping material with dimensions of 1300 x 2500mm, Drive Engines used to drive high-power machine tools provide appropriate acceleration and speed in individual directions. The X and Y axes feature high-quality HIWIN toothed racks praised by users, which ensure high durability and precision, All axes move on rail guides. Machine equipped with tool height sensor Linear bearing: trapezoidal rails Spindle High quality spindle that is durable. Additionally equipped with an air cooling system The construction of the spindle uses high-quality sealed bearings, characterized by very quiet operation and guaranteeing increased durability. Tool height measurement sensor - included. Spindle speed range is 4,500 to 18,000 rpm. Tool clamping with 3 pcs ER32 collets, diameters 1/8", 1/2" and 5-6mm Software The machine is equipped with ARTCAM PRO software as standard Optional available: UCANCAM V11 CAD/CAM CNC software in Polish version The software enables quick and easy design of elements, which the program then converts into the so-called. G-code. It is also possible to import ready-made files from other programs. DSP control Digital Signal ProcessingDigital Signal Processing The DSP controller of the machine has its own processor and operating memory, which ensures trouble-free operation and simple operation of the machine. The driver ensures smooth operation of the device and accuracy in machining. There is no need to reinitialize the program after a power loss. The memory built into the controller allows the machine to work without having to load the program each time. Technical parameters Spindle 5.5kW / 18000rpm. inverter, air-cooled Workspace 1300x2500mm Maximum spindle height 350mm Control DSP Software resolution 0.001mm Software complete Power 400V Weight 980 kg Machine dimensions 2100x3100x2200mm Chedpoiz A Ezefx Afgsc Table height 715mm Guides linear Transfer toothed rack ATTENTION! The machine is equipped with the function of remembering the last track of the G-code. In the event of a power failure or interruption, it restarts from the last point without losing time or material. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: ready for operation (used), Agie Zch. Signal Terminal Blok STB-06 A 621802.8, used, minor signs of wear, 100% functional. Cedpfsi D Ty Sjx Afgshc

Condition: ready for operation (used), For sale: a conveyor belt with a length of 13 meters, ready for operation. Cjdpfoukrynjx Afgohc ✅ Length: 13 m ✅ Belt width: 0.65 m ✅ Transportation can be arranged ✅ Wide selection of conveyor belts available on site Please contact us. We will help you choose the right conveyor belt to meet your needs.

Condition: new, functionality: fully functional, Spare parts for machines manufactured in Poland. AFM Andrychow, FUM Poreba, FAT Wrocław, AVIA Warszawa, Jafo Jarocin, ZM Tarnow, FAMOT Pleszew. Spare parts for Polish lathes, including: TUM 25, TUM 35, TUJ 50, TUJ 63, TUJ 560, TUJ 630, TUR 50, TUR 63, TUR 560, TUR 630, TPK 90, TRP 93, TRP 110, TR 115, TR 135. Spare parts for Polish milling machines, including: FND 25, FND 32, FND 40, C20, D36, D40, FF series, FR series. Codpsum Ixxsfx Afgshc

Condition: good (used), For sale is a used TOP MASTER planing machine FS 350 with a planing and thicknessing width of 350 mm. The machine is in good condition and has been refurbished and inspected by our qualified personnel. (fully functional) Technical data: - Planing and thicknessing width 350 mm - 3 knife shaft (strip knives) - Planing table length 1800 mm - Thicknessing height 200 mm - Planing table flaps - Drilling support - dust extraction possible Chodpfjzltigsx Afgsc The planing machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Planing machine, thicknesser, thickness, Felder Reference: R-N3011

Condition: used, Steam-heated 4-vessel brewhouse with stainless steel brewing vessels. The system is suitable for infusion and decoction methods as well as high-gravity brewing and comprises the following components: - Mash tun (Huppmann, 2004) with a capacity of 150 hl, steam-heated, insulated, with a bottom-entry agitator and pre-mash screen - Lauter tun (Huppmann, 2004), insulated, with a drop floor, grist cutter and spent grain discharge screw - First run-off vessel for wort (Steinecker, 2003), insulated tank - Wort kettle (Steinecker ‘Merlin’, 2003), steam-heated, insulated - Wort condenser - Whirlpool, insulated, with hop dosing vessel (manual flap) and top-entry spent grain discharge - Spent grain tank with a capacity of 15 hl, conical - Hop dosing unit with 3 stainless steel vessels and hop chutes on a shared stainless steel frame - Wort cooler (API, 2006), two-stage plate heat exchanger for cooling 180 hl/h of hot wort to fermentation temperature - 3 centrifugal pumps for wort transfer - Various pipework, valves, fittings and sensors Additional title: Brewing system with steam-heated stainless steel vessels; built between 2003 and Cast wort capacity up to: 18000 l ; 15,500–16,000 litres for full beer, 12,000 for bock beer Cjdpfezizb Sjx Afgjhc Malt bill: 2500 kg/batch Operation / Control: Simatic S7-400 Material: Stainless steel Features: Mash tun; lauter tun; wort transfer tank; hop dosing; wort kettle (Merlin); whirlpool; spent grain tank; wort cooling; 3 x wort pumps

Year of construction: 2004, condition: used, Insulated stainless steel lauter tun with a masher, a drop floor, and a spent grain discharge screw. Chsdpfx Aszi Ar Eefgsc Additional title: stainless steel brewing vessel with spent grain discharge Capacity: 15000 l

Condition: used, mileage: 775,382 km, power: 290 kW (394.29 HP), first registration: 02/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2027, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, loading space volume: 55 m³, loading space length: 7,600 mm, loading space width: 2,460 mm, loading space height: 2,990 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Vehicle No. for customer inquiries: 229 ----Special equipment: * Retarder * Air conditioning system * ACC adaptive cruise control * Emission standard EURO 6 * Refrigerator * SoloStar Concept * Airbag, driver's side * Compressed air tank, aluminum * Driver assistance system: Distance control * Driver assistance system: Roll control assistant * Cab: Roof height 765 mm Csdpjzviu Tjfx Afgohc * Cab: Width 2.50 m * Cab: Tilting mechanism, electro-hydraulic * Cab: L StreamSpace * Cab floor, level * Windshield, tinted with band filter * Sliding roof, electric * Upper comfort bunk, wide * Fuel tank: 2x 500 liters, aluminum * Air intake, integrated * Roof air deflector (lockable, without base trim) * Engine, 10.7 liters - 290 kW, R6 diesel (OM 470) * Fog lights with LED daytime running lights * Reversing warning system, acoustic (warning signal outside) * Seats in cab: Driver's seat, sprung comfort seat, heated * Steel rims, 9.00x22.5 (on rear axle) ----Standard equipment: * Axle configuration: 4x2 * Axle load, front axle: 8.0 t * Actros 4 * Trailer brake: 2-line system * Trailer coupling: Standard Ringfeder D40 * Trailer socket: 24V / 15-pin * Audio system: Radio with USB connection * Exhaust, to the right side * Exterior mirrors, electrically adjustable and heated * Battery: 220 Ah * Batteries arranged one above the other * Braking system, electronic (EPB) with ABS+ASR * Differential lock, rear axle * Compressed air unit, high * Driver assistance system: Attention Assist (fatigue detection sensor) * Driver assistance system: Brake Assist (Active Brake Assist) * Driver assistance system: Lane Keeping Assist * Driver assistance system: Stability Control Assist * Cab: spring-mounted, comfort * Suspension: Air / Air (full air) * Power windows * Generator: 100 A * Speed control system (cruise control) * Transmission: 12-speed - Type: G 211-12 * Urea tank (AdBlue): 60 liters * Rear axle: bevel gear 440 * Info display: 10.4 cm * Body / superstructure: Chassis * Lower comfort bunk * Comfort locking system * Communication interface * Radiator grille * Regulated steering pump * Air compressor, 2-stage * Engine brake * Engine compartment encapsulation * Curb mirrors * Waste heat recovery * Gear shifting: Mercedes-Benz PowerShift * Disc brakes, front and rear axle * Seat cover / upholstery: Fabric * Seats in cab: Co-driver's functional seat * Seats in cab: Driver's seat backrest, foldable * Voltage converter: 24V / 12V, 10 A * Splash guard, front * Side storage compartment, outside left * Power outlet in cab, 24V * Tachograph / EU control unit * Door extension for cab * Underride guard, front * Underbody panelling, aerodynamically shaped * Preparation for CB radio * Preparation for toll collection * Front axle, cambered * Regulated water pump * Central locking with remote control * Permissible total weight: 18.00 t * Auxiliary heater (water) ----Technical data: * Wheelbase: 5,500 mm * Loading area dimensions: L: 7,600 mm, W: 2,460 mm, H: 2,990 mm * Payload: 9,760 kg * Tire size: 315/60 - 295/60R22.5 * Tire tread: approx. 10-20% ----German vehicle! * 19,999.- Euro net, plus VAT * MOT / emissions test (TÜV) 02/2027 / Inspection 08/2027 * In case of export to third countries or EU countries, a security deposit will be retained. This will be refunded to the buyer after successful customs clearance or delivery. * Worldwide delivery possible - please ask us for your individual offer! * We wi

Condition: used, mileage: 588,240 km, power: 350 kW (475.87 HP), first registration: 11/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: black, gearing type: automatic, emission class: euro6, total length: 10,390 mm, total width: 2,550 mm, total height: 3,800 mm, loading space length: 6,500 mm, loading space width: 2,480 mm, loading space height: 900 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, soot filter, Mercedes-Benz 2648 Flatbed + ATLAS 290.2.E Crane 6x4 Suspension: Leaf spring/air suspension Wheelbase: 5.20 m Chsdpfx Aezwh Rpjfgoc ATLAS Crane Type: 290.2.E A6 Year: 2016 6x Hydraulic outriggers 4x Hydraulic supports 1x Remote control Flatbed: Length: 6.50 m Width: 2.48 m Height: 0.90 m Special equipment: Front axle load 8.0 t, Work lights, Audio system: CD radio (Bluetooth), Exhaust pipe downwards on the right, Brake connection standard and DuoMatic, Compressed air connection in the cab, Suspension: Front springs 8.0 t, 2 leaves, Parking brake additionally on the front axle, Windshield tinted, Fuel tank: 630 liters, aluminum, Cooler box / refrigerator, Steering assist pump, unregulated, Air intake on the side of the cab, Air compressor 2-cylinder, Engine brake reinforced, Engine mounting reinforced, Auxiliary drive MB 123-10c, Parameterizable special module, Frame lowering without air spring residual pressure control, Reversing warning audible (warning signal outside), Drawers under the railing, Circuit breaker, Seats in the cab: Driver's seat, sprung comfort seat, Sun visor outside, Stabilizer additionally, Rear axle / trailing axle, Steel rims 9.00x22.5, 24V socket in the passenger footwell additionally, Oil cooler, gearbox Additional equipment: Emission standard EURO 6, Axle configuration: 6x4, Actros 4, Trailer brake 2 - line, Connections on the left, Trailer socket 24V / 15-pin, Exterior mirrors, electrically adjustable and heated, Differential lock, rear axle, Compressed air tank, steel, Compressed air unit, medium, Cab: width 2.30 m, Cab: L StreamSpace, Cab version: StreamSpace, Lift roof, electrically operated, Preparation for comfort bunk above, wide, Cab: steel-sprung, comfort, Cab floor with engine tunnel 170 mm, Cab: mounting height 600 mm, Suspension: leaf spring / air, Power windows, Generator 100 A, Transmission 12-speed - Type: G 230-12, Urea tank (AdBlue): 60 liters, Rear axle bevel gear 233, Info display 10.4 cm with additional display, Body/superstructure: Chassis, Comfort bunk below, Comfort locking system, Communication interface, Radiator grille, Engine 12.8 liters - 350 kW R6 Diesel (OM 471), Engine compartment encapsulation, Ramp mirrors, Waste heat recovery, Disc brakes, front and rear axle, Seat cover / upholstery: fabric, Seats in the cab: Co-driver's seat, Seats in the cab: Driver's seat backrest foldable, Voltage converter 24V / 12V 10 A, Splash guard front, Stabilizer front axle, Storage flap outside left, Socket cab 24V, Tachograph / EC control unit, Door extension for cab, Underbody paneling aerodynamically shaped, Underrun protection front, Preparation CB radio, Preparation toll collection, Front axle, Water pump, regulated, Permissible total weight 26.0 t, Auxiliary heater (water), Battery 220 Ah We will also be happy to support you in the area of financing/leasing with our partners. All information without guarantee. Errors and omissions excepted.

Year of construction: 2023, operating hours: 100 h, condition: good (used), functionality: fully functional, Water treatment system for compounding and extrusion plants For sale is a complete industrial water treatment system for supplying a compounding or extrusion plant with softened and fully demineralized process water. The system consists of pre-filtration, a dual softening unit, a reverse osmosis unit, a 3,000-liter permeate tank, and a frequency-controlled dual booster pump unit. The system is particularly suitable for closed-loop cooling water circuits and for applications where a consistently high water quality and a reliable supply to the production plant are required. System configuration Pre-filtration and protection Backwash filter for mechanical impurities Flow rate: 7.5 m³/h at a pressure drop of 0.5 bar Automatic, time-controlled backwash System separator with a KVS value of 12 m³/h Connection size: R 1" Pressure regulator with a DIN flow rate of 5.3 m³/h Safety module Connection block with integrated bypass and sampling valve Flexible pressure hoses, length 1,000 mm, Rp 1", up to 10 bar Dual softening unit Dual softening unit for continuous operation Nominal flow rate: 2.9 m³/h Capacity: 200 m³ × °dH each Resin disinfection system Salt deficiency switch with potential-free alarm or low-level signal Sampling group with pressure gauge and sampling valve Hardness control unit for wall mounting Installation fitting for 1" pipe Due to the dual design, one softening column can be regenerated while the second column continues to supply softened water. Reverse osmosis unit Reverse osmosis unit with vertically arranged high-performance modules, permeate recirculation, and automatic concentrate flushing. Technical data: Permeate flow rate at 15 °C: approx. 450 l/h Recovery rate: approx. 75 % Salt rejection rate: approx. 98.5 % Required inlet pressure: 2–6 bar Feed water connection: DN 25 Permeate connection: DN 20 Concentrate connection: DN 15 Supply voltage: 3 × 400 V / 50 Hz Dimensions: approx. 1,800 × 610 × 810 mm (H × W × D) Permeate tank Black PE storage tank Capacity: 3,000 liters With level control and various connections Dimensions: approx. 1,750 × 995 × 2,450 mm (H × W × D) Dual booster pump unit Pre-assembled and electrically wired booster pump unit on a stainless steel frame, ready for connection. Equipped with two pumps and integrated frequency converters for constant and demand-based pressure supply. Technical data: Nominal flow rate per pump: 2.0 m³/h Nominal head: 43.6 m Flow rate with one pump: approx. 0.6–3.0 m³/h Flow rate with two pumps: approx. 1.2–6.0 m³/h Delivery pressure at maximum flow rate: approx. 2.5 bar Zero flow head: approx. 6.7 bar Factory-set constant pressure: 4.0 bar Pre-pressure of the diaphragm expansion tank: 3.5 bar Measuring range of the pressure sensors: 0–10 bar Diaphragm expansion tank: 8 liters Chodpfozt Sb Dox Afgsc Permissible water temperature: 1–30 °C Permissible ambient temperature: 1–40 °C Suction connection: DN 65 / PN 10, loose flange Pressure connection: 50-mm socket Supply voltage: 3 × 380–500 V Motor power: 2 × 1.1 kW Nominal current per pump: 2.2–1.9 A Dimensions: approx. 950 × 700 × 858 mm Dry weight: approx. 55 kg Technical specifications based on available documentation. Subject to prior sale and errors. An inspection of the system is possible by prior arrangement.

Year of construction: 2023, condition: new, A scrap magnet for excavator is an electromagnet that is specially designed with very deep magnetic field for sorting out and transporting metal scraps in a junkyard. There is no need to install any extra generator and hydraulic installation on the machine. So you can get rid of the extra hoses and can move the excavator easily Explore the GALEN's new magnet system for detailed information please contact us Codpfxophnygo Afgshc

Condition: used, mileage: 500 km, power: 70 kW (95.17 HP), first registration: 05/2024, fuel type: electric, overall weight: 4,250 kg, color: white, number of seats: 3, total length: 6,040 mm, total width: 2,200 mm, total height: 2,780 mm, loading space volume: 15 m³, loading space length: 3,400 mm, loading space width: 2,080 mm, loading space height: 1,570 mm, Year of construction: 2024, * ORTEN CityRollup body * All-aluminum body with segmented roll-up doors * 2 compartments at 2,057 mm + 2 compartments at 1,320 mm * DEKRA certified according to VDI 2700 ff and DIN EN 12642 XL * Range approx. 200 km * Battery: Lithium Iron Phosphate * Battery capacity: 80 kWh, 400 V * Leaf spring suspension ORTEN Electric Trucks E 35 with roll-up door body: Pricing takes subsidies into account. Technical data chassis: Manufacturer: ORTEN Vehicle class: N2 GVW: 4,250 kg (driver's license class B) Unladen weight: 2,295 kg Wheelbase: 3,745 mm Tires: 185/75 R 16C Equipment: Seats: 1+2 * Rear axle ratio i = 4.1 * Rear axle stabilizer * Disc brakes front Csdpfx Afsqz R Dmjgjhc * Drum brakes rear * Driver airbag * Fog lights * Heat-insulating glass * Driver's seat, "Luxury" version * Central locking * Electrically adjustable exterior mirrors * Storage compartments in the front doors, left and right * Multimedia 2DIN with USB port * Hands-free system * ABS * Summer tires * Spare wheel, supplied loose * Wheel chocks with holder (vehicle class N2) * Cab color similar to signal white RAL 9003 * Chassis color: graphite black * Rim color: silver * Warning triangle * First-aid kit * Hazard warning lights * Operating manual Technical data of the conversion: * Maximum speed: 85 km/h * Range: approx. 200 km * Battery: Lithium Iron Phosphate (LFP), nickel and cobalt-free * Battery capacity: 80 kWh, 400 V / DC * Charging connector: Type 2 Mode 3 / AC / IEC 62196 * Charging time: approx. 3.5 hours at 400 volts / 22 kW AC * Electric motor: Synchronous electric motor, water-cooled * Motor power: 70 kW / peak 92 kW * Torque: 410 Nm / peak 730 Nm Technical equipment: * Regenerative braking power * 22 kW on-board charger AC * DC/DC on-board power converter * Electric power steering assistance * BMS-CAN-BUS-controlled charging technology * Electric 5 kW HV cab heater * Color display, showing all relevant battery, BMS, motor and control data * Diagnostic menu for motor control and BMS integrated in the information display * Diagnostic menu for battery cell monitoring integrated in the information display * Structural elements in stainless steel * Battery heating system HV 400 volts / DC (only in charging mode) * Vehicle acceptance test according to § 13 EG-FGV / ECE R100 ORTEN City Rollup body Body dimensions: Overall length: approx. 3,600 mm, floor slope: 0 mm Overall height: approx. 2,360 mm, compartment width: front 2057 / rear 1320 mm Overall width: approx. 2,200 mm, compartment height: 1575 mm Aluminum roll-up doors: Roll-up with spring assistance. Rubber band for pulling down the roll-up doors. In the closed position, the doors are centrally secured by a locking handle, which is mounted on each side of the front panel and can be locked with a padlock. Pallet stop: Pallet stop approx. 20 mm on the outer edge of each compartment, welded to prevent goods from sliding against the door. Underrun protection: Original chassis underrun protection is used. Rear wall: Fixed rear wall. Double-walled, clad with aluminum with a smooth surface. Painting: Exterior of the body painted in RAL color. Lettering can be done according to specifications for an additional charge. Side steps: The side underrun protection consists of running boards with a non-slip surface for the driver. Steps along the body on both sides of the vehicle, between the axles and behind the rear axle.

Condition: new, mileage: 150 km, power: 129 kW (175.39 HP), fuel type: diesel, gearing type: automatic, overall weight: 7,200 kg, loading space length: 5,250 mm, loading space width: 2,200 mm, loading space height: 908 mm, number of seats: 3, Year of construction: 2026, total length: 7,880 mm, total width: 2,314 mm, total height: 2,930 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, IVECO 70C18HA8/P with Wiese aluminium body, unladen weight 2,940 kg!! BASIC DATA – STANDARD EQUIPMENT SPECIFICATION Axle configuration: 2 axles, rear-wheel drive Vehicle variant: Standard chassis with driver’s cab Rear axle suspension: Air suspension Front axle suspension: Quadro-torsion bar suspension Transmission: HI-MATIC 8-speed automatic transmission Rear axle: Twin tires on rear axle Steering: Left-hand drive Engine: 3.0L DEVIe 129kW (176 hp) Wheelbase: 4,350 mm Gross vehicle weight: 7.2 tons SEATING Seatbelt pre-tensioner on passenger side Seatbelts with warning signal for driver and passenger Standard color seatbelts Fabric seat covers ELECTRICS/LIGHTING AIR PRO controls in cab Body manufacturer interface Connectivity Box 4 GW also provides free use of the 'Smart Pack' digital service for five years, provided you accept the applicable terms and data usage policy. Telematics system is pre-installed and activated upon consent. EU digital tachograph 4.1 Manual remote control Cedpfxey Scydo Afgehc Light and rain sensor Standard front wipers Halogen daytime running lights EXTERIOR OF DRIVER’S CAB Passenger-side turn assist (BSI) Electrically adjustable and heated door mirrors Daily MY 2024 Rear cab wall window Lane Departure Warning System (LDWS) Monitors lane position and provides visual and audible signals upon lane departure Vehicle width: 2,000 mm Iveco badge chrome Black grille Emergency brake assist AEBS with city brake Wipers without high-pressure cleaning system (TPMS) Tinted windows Side vehicle designation Mirrors for body width 2,350 mm Lockable fuel filler cap on B-pillar Daily type plate Forefield monitoring (MOIS) Interior/exterior audio system Cocü confirmed with consent VWTA Electric windows for front doors Front airbags for driver and passenger with pre-tensioner Speed limiter: 90 km/h Grab handle on A-pillar for driver and passenger Left-hand drive for right-hand traffic Driver drowsiness attention warning Rear wall insulation 2 wheel chocks Traffic sign recognition with intelligent speed assistant (ISA) Portable warning beacon Warning triangle compliant with ECE-27 directive DRIVER’S CABIN / AUDIO Central locking with remote control CHASSIS 20-liter AdBlue tank under cab Towing capacity: 3.3 tons Tyres: 225/75 R 16 C profile Steel ladder frame Manual central parking brake Integrated 90l fuel tank Adaptive rear air suspension Spare wheel matching chassis tyres Spare wheel carrier under frame overhang Steel wheels Standard front axle suspension Engine/Transmission/Axles Emissions standard: EURO VI Exhaust pipe centrally under vehicle HI-MATIC 8HP automatic torque converter transmission Heated fuel filter EDC-controlled diesel particulate filter Homologated for goods transport Comfort noise insulation Remote start brake control Aluminium radiator Crankcase vent heated Engine speed: 3,500 rpm SEATING Luxury driver’s seat with armrest and lumbar support, height, tilt, and longitudinal adjustment, hydraulically suspended and heated Speed limiter Cruise control with menu navigation Dashboard wiring

Condition: used, Measuring transducers, power measuring transducers, active power measuring transducers, analog converters, frequency/analog converters, frequency dividers, isolating converters, signal converters, isolating converters, switching amplifiers Codpfx Afsf Iyu Nsgehc -Manufacturer: Schuhmann, switching amplifier -Type: SV 5.20G-312 -Price: per piece -Number: 4 piece -Dimensions: 80/23/H105 mm -Weight: 0.1 kg/piece

Condition: used, Measuring transducers, power measuring transducers, active power measuring transducers, analog converters, frequency/analog converters, frequency dividers, isolating converters, signal converters Cedpjf Iyvijfx Afgehc -Manufacturer: JEE, frequency divider -Type: FT 9003-000 -Price: per piece -Number: 19 piece -Dimensions: 100/17/H110 mm -Weight: 0.1 kg/piece

Condition: used, Temperature controller, temperature sensor, setting for temperature, signal converter, temperature converter, temperature limiter, electronic temperature controller -Manufacturer: Jumo, temperature controller 0 to 250 °C -Type: unfortunately without type designation .: 624603-10114-JR10A Chedem Ui Ihjpfx Afgjc -Dimension: 130/100/H95 mm -Weight: 0.5 kg

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, total width: 916 mm, total length: 852 mm, total height: 593 mm, type of input current: AC, input voltage: 220 V, tool diameter: 350 mm, travel distance X-axis: 400 mm, travel distance Z-axis: 400 mm, Equipment: documentation/manual, For sale is a Speronis brand presetting device of the type STP Magis 400 The device is in very good condition, fully functional and ready for immediate use Chodovtcu Sopfx Afgoc Technical data: Year of manufacture: 2013 Z-axis: 400 mm X-axis: 400 mm Max Ø: 350 mm Connection: 220 V Compressed air: 5-7 Mpa System weight (machine only): approx. 200 kg Dimensions: 916*852*593 mm Additional reducing sleeves are not included in the offer Transport and loading can be organized throughout Europe on request for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, visit us on our website

Condition: used, Heating fan, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating coil Chodpsvrdr Nofx Afgoc -Handover: in its current condition as inspected -Fan motor: missing -Manufacturer: Kampmann, air heater heat exchanger -Type: Tip 5000 -Power: kW -Fan: missing -Operating pressure: max 10 bar -Dimensions: 800/710/H740 mm -Weight: 27 kg

Year of construction: 2015, condition: as good as new (ex-display), machine/vehicle number: 2015020890, For sale is a magnetic filter system with integrated cleaning system. Filter systems of this type are usually made individually to order from customers. In this system, there is an exhibition purpose, which only served to show, and was hardly in use. product benefits Installation possible into existing production lines Separation of any ferrous metal contaminants Very corrosion resistant High wear resistance Compact design Low maintenance Technical details - 400 x 400 x 390 mm - Inlet 260x260mm - Inlet 260x260mm Chjdpfocwghbjx Afgec - 8 pcs magnetic filter rods

Year of construction: 2017, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: MAXI 91-2, The machine has been thoroughly inspected by IBS, and the pump has been newly sealed. Current pictures to follow. Easy operation thanks to a fully automatic cleaning process, allowing skilled personnel to focus on other important tasks. The wash tank is filled with a mixture of water and soluble IBS special cleaner (washing solution). Contaminated parts to be cleaned are placed in the rotating wash basket and the lid is closed. After setting the desired washing temperature and time, the device is switched on and the solution in the tank is heated. Inside the closed machine, the basket rotates at a constant speed around its own axis. The pump units draw the cleaning solution from the wash tank and distribute it via six stainless steel spray pipes with overlapping flat spray nozzles. The parts to be cleaned are intensely sprayed with the hot solution from all sides during the steady rotation of the motor-driven basket. Once the cleaning cycle is finished, the device shuts off automatically. Advantages Cjdoudz D Uopfx Afgehc - 2 pumps arranged horizontally - 6 three-dimensionally arranged stainless steel spray pipes - Robust stainless steel construction - Additional small parts cleaning basket made of stainless steel (diameter 170 mm) - Rotating stainless steel wash basket, V-belt drive with a separate motor - Steam extraction - Stainless steel perforated screen with filter basket above the wash tank - Low water level safety device - Individually height-adjustable feet Technical Data Capacity of immersion tank/basket: 190 l Diameter of immersion tank/basket: 910 mm Load capacity: 200 kg (optional 300 kg) Temperature min. - max.: 0-60 °C Working height: 500 mm Dimensions (W x D x H): 1310 x 1160 / 1350 x 1285 / 2000 mm Weight: 150 kg Heating output: 6 kW Spray rate: 2 x 6,600 l/h Material: Stainless steel Electrical connection: 8 kW / 400 V / 50 Hz Pump pressure: 2.5 bar

Condition: good (used), fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register Chjdpju Scqhofx Afgjc -Manufacturer: Kampmann, air heater heat exchanger -Type: Tip 5000 2-stage 157000573036 -Power: 11.4/14.7 kW -Fan: Ziehl-Abegg -Operating pressure: max 10 bar -Number: 2x air heaters available -Price: per piece -Dimensions: 800/710/H730 mm -Weight: 49 kg/piece