Used Pipe Bending Attachment for sale (10,539)

Condition: new, functionality: fully functional, Year of construction: 2026, HAV 3293 Prjdpsiivg Sofx Af Sjb Plate width: 3200mm Top Roll diameter: 930mm Side rolls diameter: mm 800 Machine weight: 150 Ton Rolling capacities (Y:260Mpa/Ø 4650mm): 3200mmx155mm Prebending capacities (Y:260Mpa/Ø 4650mm): 3200mmx115mm

Condition: new, functionality: fully functional, Year of construction: 2026, roller (bottom) diameter: 310 mm, roller (top) diameter: 320 mm, roller diameter: 310 mm, roller length: 1,550 mm, working width: 1,500 mm, sheet thickness steel (max.): 38 mm, overall weight: 12,500 kg, total length: 4,500 mm, total width: 2,300 mm, total height: 1,740 mm, power: 18.39 kW (25.00 HP), working length: 1,500 mm, Equipment: documentation/manual, emergency stop, FACCIN HAV 15342 variable three-roll bending machine Electronically controlled, hydraulic three-roll bending machine Technical data: Number of rollers: Three Geometry of the side rollers: variable Working width: 1550 mm Top roller diameter: 320 mm Side roller diameter: 310 mm Pressure force against the top roller: 160 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 18 kW (25 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 12,500 kg Length: 4,500 mm Width: 2,300 mm Height: 1,700 mm Guaranteed performance: for material with yield strength 260 N/mm² Rolling capacity (full working width) 38 mm Bending capacity (full working width) 20 mm from pipe diameter 1,600 mm Rolling capacity (full working width) 30 mm Bending capacity (full working width) 17 mm from pipe diameter 415 mm Standard equipment: Variable geometry with linear guides for roller movement Extra long folding bearing for increased frame stability Electronic parallelism system EPS Hardened rollers for high wear protection All rollers ground after heat treatment Siemens S7-HMI PLC control system PGS-CLASSIC control system with Siemens touch panel Hitech hydraulic and electrical package Simultaneous rotation and roller movement Safety ripcord with emergency stop and CE certification Central lubrication Water cooling for the hydraulics Cone bending device Prepared for retrofitting of supports and roller conveyors Pjdpfx Ast Akt Rsf Ssrb FACCIN Advantage Package AP

Condition: like new (used), functionality: fully functional, Year of construction: 2016, operating hours: 10 h, Includes: Special iron turning tool ATRC 18 Special scroll bending tool ATAR 305 Spiral bending device ATSC Demonstration machine, no 10h worked! TECHNICAL DATA Shaft diameter mm. 30 Roller diameter mm. 128 Roller revolutions per minute rpm. 8.5 - 17 Drive motor Kw. 0.75 Main switch with release coil and built-in emergency (CP30 - CP30 R) - Reversing gear and double speed switch are mounted on a separate console (CP30 - CP30 R) - Foot switch Foot switch rotation control L/R with built-in emergency - (CP 30 PR) - Two-speed selector (CP 30 PR) - Mechanical regulation of the upper roller Mechanical regulation of the upper roller with position reading on display - Two traction rollers with ribbed surface Internal machine body made of steel - Steel shafts steel shafts, hardened and ground - Gear wheels made of special special steel with ground teeth - Rollers made of special steel Prsdpjt Akxaefx Af Seb with a hardness of 59/60 HRC - Outer cover in ABS - Working position horizontal (CP 30) Horizontal working position (CP 30) - Horizontal and vertical working position vertical (CP 30 R - CP 30 PR) Weight: CP 30 PR 240 kg. External dimensions mm: CP30 PR Base 680 x 800 - Height 825 ACCESSORIES Straightening rollers with two positions - Universal rollers ( standard ) - Operating key Operating key - Operating instructions

Condition: new, Year of construction: 2026, KRBS 101: Combined tube, profile, and belt grinding machine Prsdpfjcnz Ayjx Af Seb Convenient operation thanks to easily adjustable clamping device The rotatable clamping jaws of the clamping device enable secure clamping of square tubes, round tubes, and flat steel Adjustable grinding angles from 30 - 90° and from 0° - 60° The optimized quick-change holder allows the clamping roller to be easily and quickly replaced without tools Particularly durable thanks to larger and improved roller bearings Practical clamping roller holders integrated in the base Extensive range of clamping rollers for grinding various tube diameters available as accessories Quick changeover between tube grinding and belt grinding possible Powerful motor Almost all settings can be carried out without tools (operating tool included) Large, foldable protective screen with optimal field of vision Two belt speeds allow optimal adaptation to the respective material (15 m/s best for stainless steel and aluminum, 30 m/s perfectly suited for steel) With two easily removable chip collection containers Dust extraction port (Ø 100 mm) for dust extraction systems available Dust extraction systems available as accessories Further developed, vibration-reducing base Scope of delivery: 1 x Standard grinding belt, grit size K 36 2 x Chip collection containers 1 x Wrench 1 x Grinding roller 42 mm Model: KRBS 101 Item No.: 3921001 Technical data Mains connection: 400 V Mains frequency: 50 Hz Motor power: 2.5 / 3.3 kW Grinding diameter: 20 - 76 mm Grinding angle: 30 - 90 ° (0° - 60°) Grinding belt (length x width): 2000 x 100 mm Belt speed: 15/30 m/s Dust extraction port diameter: 2 x 100 mm Dimensions (length x width x height): 1250 x 750 x 1140 mm Weight: 159 kg Location: Ex works - available for short-term delivery

Condition: used, Year of construction: 1980, total length: 1,500 mm, total width: 1,400 mm, total height: 1,400 mm, Colour: Green Predpfx Aszx Undjf Sob Empty weight: 2.500 kg Price: On request - Year: 1980 - Documentation available: No - CE certificate present: No - Serial number: 802315 - Drive system: Conventional - Drive: Hydraulic - Vertical/Horizontal: Horizontal and vertical - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 2 - Power [kW]: 5.5 - Shaft diameter [mm]: 105 - Moment of resistance [cm³]: 30 - Top roll diameter [mm]: 275 - Bottom roll diameter [mm]: 275 - Capacity diameter round [mm]: 60 - Options: Extra rolls - Transport dimensions: 1500mm x 1400mm x 1400mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 1993, control type: NC control, actuation type: hydraulic, number of rollers: 3, shaft diameter: 120 mm, overall weight: 6,400 kg, total length: 2,900 mm, total width: 2,130 mm, total height: 2,130 mm, Profile bending machine HAEUSLER - HPR 13 MACH-ID 9800 Make: HAEUSLER Type: HPR 13 Year: 1993 Set universal rolls Horizontal and Vertical positioning Hydraulic machine Scales for position side rolls Psdpfx Afjzxw E Ej Serb Horizontal and vertical:H + V Shaft Ø: 120mm Number of rolls: 3 Stroke X-Axis: 0 - 300mm Capacity flat: 130 x 20mm Capacity Tube: 114,3Ø x mm Capacity bar: 70 x 70mm Working speed: 0 - 5000mm/min. Length: 2900mm Width: 2130mm Height: 2130mm Weight: 6400kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: 19142, roller (bottom) diameter: 140 mm, roller (top) diameter: 120 mm, working width: 1,250 mm, sheet thickness (max.): 6 mm, TECHNICAL DETAILS Max. sheet thickness: 6 mm Max. pre-bending thickness: 4 mm Max. working width: 1,250 mm Number of rollers: 4 pcs. Number of driven rollers: 2 pcs. Diameter of upper roller: 120 mm Diameter of lower rollers: 140 mm MACHINE DETAILS Control system: CNC Drive: Hydraulic Power: 4 kW Dimensions & Weight Unladen weight: 1,450 kg Dimensions (L x W x H): 2,700 x 1,450 x 1,500 mm Transport weight: 1,450 kg Number of transport packages: 1 pc. EQUIPMENT CE marking Predpfxszuwwas Af Sjb Documentation

Condition: new, neu Psdpjy Dvlkjfx Af Ssrb ca. 10 Wochen ab Auftrags Türkei 5100 € 98.43 € 1050 mm 2 mm 75 mm 1.5 kW 1610 mm 700 mm 1160 mm 385 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by ratchet lever longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch user manual in GERMAN or ENGLISH OPTION (PRICE ON REQUEST): hardened rolls

Condition: used, Year of construction: 1972, total length: 1,800 mm, total height: 1,400 mm, total width: 2,250 mm, Colour: Green Empty weight: 2.000 kg Price: On request - Year: 1972 - Documentation available: No - CE certificate present: No - Control: Conventional - Transport dimensions: 1800mm x 2250mm x 1400mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Prodpfx Aezm N Riof Sob Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2024, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, working width: 6,400 mm, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, back gauge adjustment: CNC-controlled, back gauge: 1,250 mm, insertion depth: 1,250 mm, working length: 6,400 mm, Equipment: CE marking, cone bending device, documentation/manual, emergency stop, safety light barrier, Latest Generation Sheet Metal Bending Machine: - 6400 x 2mm - New Tool Geometry - Sheet width up to 1250mm Prsdozxg R Repfx Af Seb - New hybrid hydraulic system: Greater speed and efficiency - New Alligator CNC Control - Tapered Back Gauge - Safety Laser

Condition: good (used), *Description:* ZOPF RS 302 three-roller bending machine, manufactured in 1990. German-made. Manual machine mounted on a base for bending round, square, flat, and shaped steel, stainless steel, and aluminum tubes. Mounted on a metal frame with integrated storage. Complete machine with rollers. Ideal for locksmithing, sheet metal work, and guardrail fabrication. *Specifications:* - *Brand / Model*: ZOPF RS 302 9048 L - *Year*: 1990 Podpfjzxhh Rox Af Serb - *Type*: Manual three-roller bending machine - *Adjustment*: Upper roller adjustable by handwheel - *Mounting*: On a steel base with doors - *Safety*: Emergency stop - *Equipment*: Set of rollers included *Condition:* Good overall condition. Machine is visible and operational. Video available upon request.

Condition: used, Engine and transmission for GRM 80 – according to the previous owner, the transmission was overhauled and has not been used since. ATTENTION!! This offer includes only the engine and transmission! Prjdpfx Aszw I Hqjf Sjb

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, control type: CNC control, controller manufacturer: ESA, controller model: Touch Panel, pipe diameter (max.): 30 mm, pipe length (max.): 4,000 mm, tube wall thickness (max.): 4 mm, overall weight: 3,700 kg, total length: 6,000 mm, total width: 1,800 mm, total height: 1,800 mm, Tube bending machine Transfluid - DB630 A3 CNC MACH-ID 9783 Make: Transfluid Type: DB630 A3 CNC Control: ESA TOUCH PANEL Year: 2008 Prjdpfxszvfq Dj Af Sob Max.Tube Ø: 30mm Min. Tube Ø: 4mm Max. Wall thickness:4mm Max. Bending radius:180mm Min. Bending radius:10mm Max. bending length:4000mm 3e dimsion bending:Yesmm/min. Number of tools: 10,12,15,16,18,20,22,28 Length: 6000mm Width: 1800mm Height: 1800mm Weight: 3700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1987, Press brake, bending machine, swing bending machine, die bending machine -Manufacturer: LOTZE Swivel bending machine with segmented upper jaw type 1512000 3.5 -Drive: mechanical, cam control semi-automatic -Max. working width: 2000 mm -Max. sheet thickness: 3.5 mm -Max. intermediate dimension: 180/280 mm -Accessories: 12 segmented upper cheek splints, 3 upper cheek splints -Connected power: kW Prjdpozwpm Sofx Af Seb -Dimensions: 3350/1250/H1600 mm -Weight: 2555 kg

Year of construction: 2017, condition: excellent (used), Tube cutting system with optical laser mark detection The FZH Vario Flex is a fully automated tube cutting system. It is specifically designed for the precise, reliable cutting of stainless steel tubes (e.g., for fuel, brake, air conditioning, or hydraulic lines). The system features optical laser mark detection. The control panel allows the user to select whether the cut is triggered mechanically (e.g., at the back of a union nut) or fully automatically via optical detection of a laser mark applied to the tube. Thanks to an integrated rotating 3-jaw cutting head and a micro-spray unit (minimum quantity lubrication), the machining process is extremely gentle on the tools. The tubes remain almost completely dry and free of heavy soiling. The entire process—from loading and clamping to cutting and unloading—is highly automated and follows a material-friendly cycle. Fully integrated labeling and traceability system: The system is designed to meet modern quality standards (Industry 4.0 / automotive). Following the cutting process, a barcode label is automatically generated, assigned, and printed to ensure seamless part traceability (tracking and system logging are directly integrated). Equipped with two separate bin discharge stations (rear-facing hatches with sliding doors), the system automatically switches to the second station when a bin is full. Finished KLT bins can be removed while the machine continues to operate, without interrupting the production cycle. Technical Data & Capacities Maximum tube length (feed): 1,000 mm Material specification: Optimized for stainless steel tubes (including those with pre-assembled union nuts or flared ends) Sensors & positioning: Optical sensors for automatic detection of laser markings on the workpiece Feed system: Automatic drum magazine / vertical disc feeder (for manual or automatic loading) Length adjustment: Continuously adjustable for different tube lengths via a manual handwheel Cutting method: Chip-removing sawing / rotating cutting head with three-jaw clamping and cutting mechanism (up to 600 rpm) Coolant/lubrication system: Integrated micro-spray unit (MMS) for minimum quantity lubrication Control system: Siemens SIMATIC HMI industrial PC with TFT monitor, keyboard, and mouse Setup mode: Mobile Siemens teach-in terminal for manual axis configuration and position storage Integrated labeling and barcode printing system Enclosure: Aluminum profile system with safety Makrolon panels Logistics / Output Integrated bin deposit station 2 separate bin output stations for rear-side removal via protected interlock systems with sliding doors Suitable for standardized KLT containers (600x400 mm and 400x300 mm) Manufacturer: FZH Engineering GmbH Type / Platform: Vario Flex Year of manufacture: 2017 Material: Stainless steel Cutting head: Vario Flex Special features: Tubes with union nuts Psdszw Ukcjpfx Af Sorb Diameter: Ø 6–76 mm Output length: L = 150–1,000 mm Cutting based on laser marking Wall thickness: 1 to 1.3 mm Condition: The system is in good visual and mechanical condition in excellent, clean condition. “Everything from a single source: We would be happy to offer you suitable bank financing for your project.” komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: excellent (used), Technical data: 2 rollers, hydraulically adjustable 2 support rollers 3 driven rollers NC control Shaft diameter: 80 mm Shaft length: 160 mm Roller diameter: 224 mm Motor power: 5.5 kW Mobile control panel Dimensions (length x width x height): approx. 1240 x 1460 x 960 mm Weight: approx. 1.4 tons Condition: very good condition, little use The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty. Podpozv Ernjfx Af Sorb

Condition: new, functionality: fully functional, Year of construction: 2026, CNC Rebar Bending Machine – GW45 | Ø 6–32 mm | 4 kW | 24 Month Warranty CNC-controlled rebar bending machine for medium to heavy-duty reinforcement steel processing. The GW45 is equipped with a large 360 mm turntable and is capable of bending rebar with diameters from 6 to 32 mm. Its compact and mobile design is ideal for both workshop and on-site applications. Key Specifications: • Rebar Diameter: 6–32 mm Prodpey Swpgofx Af Seb • Turntable Diameter: 360 mm • Motor Power: 4 kW • Power Supply: 380 V • Machine Weight: 270 kg • Dimensions: 880 × 850 × 800 mm ✅ CNC control – programmable bending angles ✅ Large 360 mm turntable for heavy-duty rebar ✅ Compact & mobile – suitable for on-site applications ✅ All spare parts in stock – motor, bending discs, control electronics ✅ 12 months warranty ✅ CE certified | Technical support available

Condition: good (used), Brand Boschert Model EL 500 Digital Year of construction 2009 Press force 28 tons Throat depth 180 mm Prsdpfx Afew Hyc Sj Sob Punching capacity 40 mm in 6 mm Worktable size 500x1000 mm Number of strokes 180 pcs Dimensions 2400x1580x1540 mm Weight 2000 kg Power 5 kW

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Siemens, roller (bottom) diameter: 160 mm, roller (top) diameter: 175 mm, side roll diameter: 135 mm, roller length: 1,550 mm, working width: 1,500 mm, sheet thickness (max.): 7 mm, power: 4.4 kW (5.98 HP), input voltage: 400 V, input frequency: 50 Hz, warranty duration: 12 months, Equipment: centralized greasing system, cone bending device, documentation/manual, hardened rollers, swiveling upper roller, Electronically Controlled, Electrohydraulic Four-Roller Plate Bending Machine Manufacturer: FACCIN, Model 4 EDL 1617 Prjdowwt Ddepfx Af Sjb Technical Specifications: Number of rollers: Four Geometry of side rollers: Linear guides Working width: 1500 mm Top roller diameter: 175 mm Bottom roller diameter: 160 mm Side roller diameter: 135 mm Pressing force against top roller: 80 tons Guaranteed installed power: 4.4 kW (6 HP) Guaranteed maximum rotation speed: 0–10 m/min Guaranteed machine weight: 3,150 kg Length: 3,300 mm Width: 1,170 mm Height: 1,100 mm Guaranteed Performance: For material with yield strength 260 N/mm² Rolling capacity (full working width): 7 mm Pre-bending capacity (full working width): 6 mm From pipe diameter: 875 mm Rolling capacity (full working width): 5 mm Pre-bending capacity (full working width): 5 mm From pipe diameter: 225 mm Standard Equipment: Double linear guide system for roller movement Extremely wide bearing blocks MCS double bearing system for roller rotation Extra heavy-duty, double-support swing bearing Electronic Parallelism System EPS Hardened rollers for high wear resistance All rollers ground after heat treatment Siemens PLC control system Electric drive for top roller for increased efficiency Safety trip wire with emergency stop and CE certification Centralized lubrication Cone bending device Optional Equipment Included: CNC control PGS-ABSOLUTE

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, number of rollers: 3, shaft diameter: 35 mm, rotational speed (max.): 30 rpm, overall weight: 490 kg, power: 1.5 kW (2.04 HP), input voltage: 400 V, input frequency: 50 Hz, warranty duration: 12 months, Equipment: CE marking, documentation/manual, BPR BA 35 CNC Three-roll ring bending machine, hydraulic Technical data: Shaft diameter: 35 mm Roll diameter: on request Shafts made of durable steel, hardened and ground Drive motor: 1.1 kW, 50 Hz Hydraulic pump motor: 3 kW Shaft speed (variable): 0–30 rpm Working position: horizontal and vertical Separate control panel External dimensions: 740 x 1020 x 1110 mm Control panel dimensions: 600 x 710 x 1120 mm Weight: 490 kg Hydraulic adjustment of the side roll Three powered rollers with smooth surface Electronic control BPR Probending CNC Hydraulic cylinder pressing force: 5500 kg Working pressure: 190 bar Accessories included: Prsdpfxewwt Hfe Af Seb Rollers for 1" pipe Straightening rollers Operator's key Operating manual

Condition: new, functionality: fully functional, The EVO is the latest innovation in sheet metal processing. It is equipped with numerous innovative and patented features that increase your production capacity and productivity, while offering the lowest total cost of ownership. The high-quality components used in this machine and the latest version of the BENDtronic® control system, which is installed as standard on all EVO machines, are particular highlights. Available from stock: HAEUSLER EVO 31031 4-roll round bending machine / roll bending machine Manufacturer: Haeusler Type: EVO 31031 4-roll round bending machine / roll bending machine Origin: Germany / Switzerland Year of manufacture: 2024 Condition: NEW, exhibition machine Prjdpfxjxwmb Ho Af Ssb Availability: immediately Performance: Working width 3100 mm Round bending capacity 14 mm Bending capacity 12 mm Not the right machine? As a representative of Haeusler, we can put together and offer you your desired machine according to your requirements. Please do not hesitate to contact us.

Condition: new, functionality: fully functional, Year of construction: 2025, The EVO is the latest innovation in sheet metal processing. It is equipped with numerous innovative and patented features that increase your production capacity and productivity while simultaneously offering the lowest overall operating costs. The high-quality components used in this machine, as well as the latest version of the BENDtronic® control, which is installed as standard on all EVO machines, are particular highlights. HAEUSLER EVO 21015 4-roll round bending machine / roll bending machine Psdpfjxnnf Ijx Af Sjrb Manufacturer: Haeusler Type: EVO 21015 4-roll round bending machine / roll bending machine Origin: Germany / Switzerland Condition: NEW, showroom machine Availability: 12-14 weeks Performance: Working width 2100 mm Round bending capacity 12 mm Pre-bending capacity 9 mm Standard equipment: • Variable oscillation adjustment of the side rolls VSA® • HAEUSLER Hybrid Drive System HHDS® • Movable 21.5" touch control panel including high-end BENDtronic® control • Infinitely adjustable rotation speed between 0 and 8 m/min • Machine prepared for remote maintenance • Electro-mechanical locking system for the rotation of the top roll • Automatic pressure adjustment of the bottom roll • Automatic pressure compensation of the bottom roll cylinder, standard cooling system for ambient temperatures up to 35° C • Automated axis optimization • Automatic shutdown of the hydraulics for the roll position • Ultra-compact design to reduce or even eliminate foundation costs • Safety emergency stop cord Optional equipment: • Two-roll drive for the top and bottom rolls • Taper bending device for bending conically shaped workpieces • Extended cooling system for ambient temperatures up to 45 °C • Upper support for easier bending of large diameters • Side support to assist in bending large diameters • Gas pressure accumulator for calibrating already welded cylinders • BendIT-Office workstation software • Autonomous bending • Machine prepared for quick change of top rolls • Interchangeable top rolls with different diameters for bending shots with small diameters • Hardened rolls if black and stainless material is to be bent • Infeed roller table for easy feeding of sheets into the machine • Centering device for the infeed roller table, for automatic centering of the sheets before bending Not the right machine? As a representative of Haeusler, we can put together and offer you your desired machine according to your needs. Further information on request.

Condition: new, number of rollers: 3, roller (bottom) diameter: 95 mm, roller (top) diameter: 95 mm, side roll diameter: 95 mm, roller length: 1,070 mm, sheet thickness steel (max.): 3 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, swiveling upper roller, - Capacity 1070 x 3 mm - Conical rollers - Pivoting top roller - Foot pedal control - Brake motor - Emergency stop Pjdpfewhgm Tex Af Serb - Documentation - 400V

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 232657 SZ. 281, overall weight: 2,400 kg, total width: 1,350 mm, total length: 1,200 mm, total height: 2,400 mm, type of input current: three-phase, input voltage: 400 V, year of last overhaul: 2023, Refurbished eccentric press from a traditional blacksmith's workshop. An eccentric press manufactured by Ganz and Társa in 1897, now in fully refurbished condition, is for sale, complete with a set of rare cutting tools. During the refurbishment, the following parts were replaced: - Main shaft grey cast iron bearings - Drive shaft - Drive shaft bronze bearings - 3 locking pins Psdpfx Aozt Dmfsf Sjrb - All protective covers - Complete repainting (with the cast surface pre-cleaned by shot blasting) The cutting tools can still be used to create various leaf and flower patterns, which are then shaped into their final form by hand. This process allows for the traditional production of completely unique shapes that are no longer available commercially. The machine has a unique historical background, and I can share more information and archival images with the buyer.

Condition: used, A mobile extraction unit with a large filter area and a set of hoses for a small workshop. Pedeztvwcopfx Af Ssrb Technical data: - Extraction nozzle diameter: 160 mm - Motor power: 1.5 kW - Dimensions: 1,220 x 650 x 3,270 mm