Used Otmt 2012 Otmt Ot101 for sale (1,407)

Condition: used, Aluminum flat belt conveyor Geppert Belt AM-F 7.30m x 0.30m with drive Ksdog Ib U Hopfx Ahbjdu The AM-F plastic modular belt is characterized by its slim design. The width of the frame is only 14mm wider than the chain. At the bend, it is only 40mm wider. The frame, including the chain, is 95mm high. The modular plastic chains of the AM-F are easy to clean, particularly durable, and maintenance is easily carried out by replacing individual links. Technical data: Year of manufacture: 2012 Length: 7.30m Width: 0.30m Height: 1.00m Drive: 220/240V 1PH Complete factory closure, large selection of storage mezzanines, pallet racking, shelving systems, and paternoster lifts. High-quality industrial machines, lathes, grinding machines, and hand tools. More items - new and used - can be found in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2012, operating hours: 24,660 h, spindle motor power: 15,000 W, spindle speed (max.): 4,500 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 580 mm, total height: 2,225 mm, total width: 1,725 mm, bar diameter (max.): 65 mm, overall weight: 4,570 kg, controller manufacturer: FANUC, controller model: Series 18i-TB, product length (max.): 3,039 mm, workpiece diameter (max.): 335 mm, number of slots in tool magazine: 12, number of axes: 4, This 4-axis Hyundai Wia L2100SY turn-mill centre was manufactured in 2012. It features a maximum turning diameter of 335 mm and a turning length of 455 mm. The machine is equipped with a 12-station turret and a spindle speed of up to 4,500 rpm. If you are looking to get high-quality turning capabilities, consider the Hyundai Wia L2100SY machine we have for sale. Contact us for further details. Kdedpfx Aozimmgjhbsu Spindle hours total 24,660Control Unit: FANUC Series 18i-TBVoltage: 380 V (3Ø)Frequency: 50 HzRated Power: 33 kVAFull Load Current: 51 AControl Voltage: AC 110 V / DC 24 VSwing Over Bed: Ø630 mm (24.8")Swing Over Carriage: Ø390 mm (15.4")Max. Turning Diameter: Ø335 mm (13.2")Max. Turning Length: 455 mm (17.8")Bar Capacity: Ø65 mm (2.6")Chuck Size: Ø210 mm (8")Spindle Bore: Ø76 mm (3")Spindle Speed Range: 45–4,500 rpmSpindle Motor (Continuous): 15/11 kW (20/15 HP)Spindle Motor (Maximum): 25.4/18.5 kWSpindle Torque (Continuous): 254.2 NmSpindle Torque (Maximum): 597.7 NmSpindle Nose: A2-6Rapid Traverse X/Y: 24/24 m/minRapid Traverse Z: 18/12 m/minSlide Type: Box GuideTurret: BMT65OD Tool Size: □25 × 25 mmID Tool Size: Ø50 mm (2")Indexing Time: 0.2 sec/stepX-Axis Motor: 5.5/3.7 kWZ-Axis Motor: 5.5/3.7 kWTorque: 5,000 NmCoolant Tank Capacity: 220 L (58.1 gal)Lubrication Tank Capacity: 0.9 L (0.5 gal)Power Requirement: Over 35 kVAMain Spindle Chuck: Samchully MH-208Sub Spindle Chuck: Samchully HS-06Chuck Jaws optional Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 2012, Ref:11157 . 2012 Aster Universe - Digital folding, gathering and book sewing machine The new sheet-fed solution for fast and versatile digital book production. This automatic folding and book-sewing machine is faster and features automatic set-up that reduces change-over time significantly, making the solution even more versatile. Equipped with: Flat pile feeder (for single sheet) Folding unit Collating unit Sewing unit Thread trimming device Delivery Touchscreen computer Automatic size change Specification: Max. speed 550 A4 sheets/min Sheet size: Ksdoz Hbvnjpfx Ahbsdu    Max:  420 x 640 mm / Min: 120 x 200 mm Signature size:    Max:  420 x 320 mm / Min: 150 x 100 mm

Condition: good (used), Year of construction: 2012, Ingersoll Rand screw compressor Kdodpfx Asu Ic Ryjhbsu 225 Kw Year 2012

Condition: ready for operation (used), Year of construction: 2012, operating hours: 41,150 h, travel distance X-axis: 650 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D sl, overall weight: 10,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 33,500 W, number of slots in tool magazine: 80, number of axes: 4, This 4-axis Starrag Heckert HEC 400 D was manufactured in 2012. It features a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 80 tools, allowing for efficient machining operations. The machine includes two workpiece pallets with a size of 400 × 500 mm. If you are looking to get high-quality machining capabilities, consider the Starrag Heckert HEC 400 D horizontal machining centre we have for sale. Contact us for further details. Kdsdpsyzn Dgsfx Ahbsu • Temperature range: 5–35 °C • Operating hours: 41,150 hours • Spindle hours: 1163 hours • NCU type: NCU 710.2 • NC software version: V02.07.01.06 • MMC software: 07.06.02.02 • Standard software cycles: 07.05.11 • Tool magazine type: Chain magazine • Workpiece pallets: 2 • Pallet size: 400 × 500 mm • Spindle torque: 200 Nm • Coolant pressure (option): up to 80 bar • Coolant tank capacity: 1350 l • Coolant flow (swivel shower): approx. 70 l/min • Axis measurement system: Heidenhain LC483 • Rotary axis measurement: Heidenhain RCN226 • Position frequency analysis X-axis: 29 Hz • Position frequency analysis Y-axis: 54 Hz • Position frequency analysis Z-axis: 52 Hz • Spindle + motor replaced: July 2025 Additional equipment • Vapour extractor: AFS 600spindle and motor replaced in July 2025 Technical Specification Taper Size SK 40

Condition: used, mileage: 760,000 km, power: 368 kW (500.34 HP), first registration: 02/2012, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro3, loading space length: 6,050 mm, loading space width: 2,530 mm, loading space height: 600 mm, Year of construction: 2012, Equipment: ABS, air conditioning, crane, Volvo FH 500 / 6x2 Platform 6,05 m + CRANE + REMOTE CONTROL Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2012 ? MILAGE: 760 000 km EQUIPMENT: ? ABS ? C. LOCKING ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH PLATFORM: 605 x 247 x 60 cm (L x W x H) CAPACITY: 9 000 kg TOTAL WEIGHT: 26 000 kg WHEELBASE: 490/140 cm TIRE SIZE: 315/80R22,5 SUSPENSION: FRONT: SPRING BACK: AIR Kedsxbv Rxopfx Ahbsdu CRANE: PALFINGER PK 42502 + REMOTE CONTROL TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref nr: 07279

Condition: excellent (used), em: D-8061-Flowmeter-Siemens/Danfoss MAG1100 F, Digital MAGFLO Flow meter Type MAG 6000 Transmitter with touch display. Secondhand size DN15 (1/2") Max. flow: 20m3/h Kedpeirfbwjfx Ahbjdu Max. Press: 20 Bar/290 psi Max. Temperature: 130 c/166 f Min. Temperature: -30 c/-22 f Year 2012 Input 60 V max 0.125 A For more informations please contact us! From 2008. Nominal Capacity: 20,5 kW Transmission: 2,7 m2 Press: 4,5 Bar

Year of construction: 2001, condition: excellent (used), Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under power and is in very good condition. Pressing capacity in t: 200 Quantity of oil in l: 1100 Stroke in mm: 300 Table size (lxb) in mm: 600 x 600 Daylight in mm: 1000 Upper ejector stroke in mm: 25 Kedpfx Aohfwqzjhbodu Upper ejector force in t: 10 Total weight in kg: 12000 Operating pressure in bar: 6 Approach speed in mm/sec: 375 Working speed in mm/sec.: 18 - 40

Condition: used, Year of construction: 1978, Equipment: documentation/manual, emergency stop, foot remote control, I am offering an electro-hydraulic profile bending machine, purchased in 2012, manufactured by Roundo AB, Sweden, type: R-7S (used, workshop-inspected, and partially refurbished with standard configuration, including vertically arranged bending axes, for sale. It is fully operational and can be demonstrated under power after prior consultation. - Control panel on the swivel arm with joysticks and switches - Digital displays for the two side rollers Significant added value: Extensive tool and profile package included! To be able to handle customer orders in an even more flexible and individual manner, significant investments have been made in expanding the range of tools. In addition to the standard tools, you will receive: • 36 additional rollers for a wide variety of profiles. • Special tool for flat and light-duty profiles up to a height of 500 mm. • Tools for square and rectangular tubes. • Tools for various round tubes Ø (88.9 + 114.3 + 139.7 + 168.3) mm. This machine is designed according to the latest findings in the tube and profile processing industry (as of 2012). The fixed bending roller is equipped with an adjustable slip clutch, which automatically adjusts the speed of the bending roller to the workpiece being bent. The three bending axes are mounted on oscillating roller bearings. A set of complete universal bending rollers for bending angle and T-sections with flange facing inwards and outwards, flat sections upright and lying flat, and square material. The rollers are made of wear-resistant and hardened steel. They consist of three adjustable rings, allowing various profiles to be rolled. Two independently adjustable guide rollers, which can be adjusted fully hydraulically on three different axes. The guide roller unit is equipped with small, interchangeable rollers. This allows asymmetric profiles to be held flat. This is especially necessary for angle sections with the flange facing inwards. Maximum pressure valve to prevent machine overload. Thermal overload protection for both electric motors. Main switch, emergency stop switch, 24 V transformer, equipment according to UVV standards. Multi-button switch mounted on the swivel arm for operating the machine. A set of keys and tools including operating manual in German. Kdedpoz Nhlijfx Ahbsu In practice, it has been shown that the quality of bending angle steel with the existing standard roller sets leads to limited results. Extensive investment! In recent years, important core components of the hydraulic system have been professionally renewed. The execution of the work is fully documented with existing invoices: • 2021: All hydraulic hoses were completely replaced. • 2022: As part of an oil leak repair, a brand new Bauer hydraulic motor was installed. The total cost for the motor including professional installation amounted to approximately €21,000 net. • Proof is available for the hydraulic motor: Test Certificate for Hydraulic Motors, Certificate of Conformity, Manufacture Certificate, and invoices. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The dismantling, loading and collection must be organized and carried out by the buyer himself or by a freight forwarder commissioned by him. • Technical specifications according to existing documents. Subject to prior sale.

Condition: used, mileage: 334,000 km, power: 265 kW (360.30 HP), first registration: 02/2012, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: grey, gearing type: automatic, loading space length: 4,800 mm, loading space width: 2,350 mm, loading space height: 900 mm, Year of construction: 2012, Equipment: ABS, air conditioning, crane, MERCEDES ACTROS 2636 TIPPER 4,80 m + HDS + BORDMATIC / 6x4 Imported / Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2012 ? MILAGE: 334 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ? AIRCONDITION ? POWER STEERING ? TACHOGRAPH ? RETARDER TIPPER: 480 x 235 x 90 cm CAPACITY: 12 000 kg TOTAL WEIGHT: 26 000kg TIRE SIZE: 13R22,5 WHEELBASE: 390/136 cm SUSPENSION: SPRING CRANE : HIAB 122 B-2 HIDUO TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) Kdjdpfsz Swxqjx Ahbeu RADEK - ????? Ref. nr: 38312

Year of construction: 2012, condition: used, functionality: fully functional, This is a combination oven/steamer CMP 101 from the premium manufacturer Rational, in an electric version. The unit has been completely overhauled in our in-house workshop and is fully functional. The unit is offered with a 6-month warranty on all electrical parts. The base shown in the picture is not included in the offer but can be purchased separately as an option. The list price is: €9,380 net. You will receive an invoice with VAT shown. Service: We will be happy to assist you in arranging a certified Rational customer service technician. This unit is the ideal choice if you are looking for a classic combination oven/steamer that you want to operate manually. Our used equipment service for you: 6-month warranty on all electrical parts, limited to the replacement of defective parts, without any installation or removal costs High-quality branded equipment at fair prices Professional overhaul / inspection & expert cleaning Tested & fully functional - or your money back Flexible shipping or self-collection options Competent advice - before and after the purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 The CombiMaster® Plus from RATIONAL is robust and impresses with its functions, which enable the highest food quality. It supports the individual craftsmanship of the chef through precisely controlled cooking chamber climate, as well as precise adjustment of temperature, humidity, airflow and cooking time. Technical data: W x D x H: approx. 847 x 776 x 1042 mm Minimum door opening dimensions for transport WxH: 845x1050mm Power connection: 400 V / kW: 18.6 / 50-60 Hz Capacity: 10x1/1GN Weight: approx. 132 kg Serial number: E11MH12112329081 Year of construction: 2012 Kedpsz Hwpdefx Ahbedu Condition: used, completely overhauled, fully functional Further details: Possible applications: Steam mode: from 30° C to 130° C Hot air mode: from 30° C to 300° C Combination mode: from 30° C to 300° C Finishing®: brings pre-prepared and cooled dishes to the optimal serving temperature in the ideal climate Automatic separation of fat for clean cooking chamber air Manual cleaning program 5 air speeds: Whether delicate or robust, the CombiMaster® Plus has the right air speed for every food Ventilated double-glazed door (swiveling for easier cleaning) LED cooking chamber lighting Core temperature measurement using a sensor Cool-down function High-performance fresh steam generator (automatic rinsing and emptying) Handheld spray gun with automatic retraction Dynamic air circulation Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is made exclusively subject to our general terms and conditions (GTC).

Condition: used, mileage: 202,000 km, power: 302 kW (410.61 HP), first registration: 06/2012, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, Year of construction: 2012, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), DAF CF 85.410 Hooksystem + CRANE Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2012 ? MILAGE: 202 000 km EQUIPMENT: ? ABS ? ASR ? C. LOCKING ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH HOOKSYSTEM LENGTH: 5,90 m CAPACITY: 16 000 kg TOTAL WEIGHT: 32 000 kg WHEELBASE: 210/365/140 cm TIRE SIZE: FRONT: 385/65R22,5 BACK: 315/80R22,5 SUSPENSION: SPRING/PNEU CRANE: PALFINGER PK 26002-EH TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) Kedpfjz Sihfox Ahbodu RADEK - ????? Ref. nr: 34559

Condition: used, mileage: 72,000 km, power: 70 kW (95.17 HP), first registration: 10/2012, fuel type: diesel, overall weight: 3,498 kg, color: yellow, gearing type: automatic, emission class: euro5, number of seats: 2, loading space volume: 17 m³, loading space length: 4,400 mm, loading space width: 2,000 mm, loading space height: 2,000 mm, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Net selling price: €9,900 Mercedes Benz Sprinter MAXI - Box van (SAXAS) First registration: 10/2012 Mileage: 72,000 km 19% VAT can be shown separately Euro 5 TÜV/MOT: Can be renewed upon request ---- Please, no email – we can only process emails sporadically due to time constraints! Thank you for your understanding! Opening hours and further information: Inspection/purchase possible without prior appointment: Kdodpfx Aovk Eb Nshbeu Inspection/purchase possible without prior appointment: No appointment necessary!!!! Mon - Thurs: 9:00 AM to 4:00 PM Fri: 9:00 AM - 1:00 PM Sat: 9:00 AM - 12:00 PM Address: Tabakried 11 84076 Pfeffenhausen If you have any questions, Christian Hirsch or our friendly staff will be happy to assist you. If you have any questions: Christian Hirsch Please try again later, as we are often in a customer consultation. - Maintained according to service schedule / Service history - 1st owner - LED interior lighting - Motion sensor in the interior - Sliding door between the cab and the box van - Rear view camera (see photos) - Various vents - Folding shelves - Electrically locked doors - Rear step Cargo space length: 4.40 m Cargo space height: 2.00 m Cargo space width: 2.00 m Special equipment: - Hill-start assist - Generator 220 A - Steering wheel (steering column mechanically adjustable) - Radio preparation - Front mud flaps - Rear stabilizer - Reinforced front stabilizer - Fleece battery 95 Ah Further equipment: - Adaptive brake light - Airbag driver side - Display for windshield washer fluid level - Exterior mirrors electrically adjustable and heated - both - Exterior mirrors with integrated turn signal - Battery 74 Ah - Brake assistant - Braking system with ABS+ASR - Headliner in the cab - Lockable glove compartment - Body/superstructure: Box van - Fuel tank: Main tank 75 liters - Headlight range control - Truck registration - Engine 2.1 L - 70 kW CDI - Wheelbase 4325 mm - Smoker's package - Tire repair kit with compressor - Low emissions according to emission standard Euro 5 - Seat cover / upholstery: Fabric Lima - Service interval display Assyst - Heat-insulating glazing - Permissible total weight 3.50 t If you have any questions: Christian Hirsch Please try again later, as we are often in a customer consultation. If you have any questions, Christian Hirsch or our friendly staff will be happy to assist you. If you have any questions: Christian Hirsch More offers at / More offers at / The equipment has been determined with the help of a VIN query; technical errors may occur. Information provided on the internet are non-binding descriptions. They do not constitute guaranteed characteristics. The seller is not liable for typographical and data transmission errors / changes / input errors. Errors and prior sale subject to change.

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 1,000 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 850 mm, controller manufacturer: FANUC, controller model: oi-MD, total height: 3,362 mm, table load: 1,000 kg, overall weight: 23,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 22,000 W, tool weight: 8,000 g, number of axes: 4, This 4-axis SPINNER H630 horizontal machining center was manufactured in 2012. Ideal for precision engineering, it offers robust construction and reliability for various machining tasks. Consider the opportunity to buy this SPINNER H630 horizontal machining center. Contact us for more information. Machine Benefits Technical Machine Benefits • Torque max (nm): 139 / 164 or 556 / 656 • Connected load: 42 kva • Table size: 2 x 630 x 630 mm • Height top edge of table (from floor): 993 mm • Clear width of door opening: 1200 mm • Table holes: m16 • Tool to tool: 5 seconds • Standard double arm changer Extra Information Machine still under power Dimensions Ksdpfx Ahszvvkzobedu Machine Depth 5970 mm

Condition: reconditioned (used), Year of construction: 2012, Johnford SV-48H “Super Vertical” CNC Vertical Machining Centre Specification: Model: SV-48H Manufactured In June 2012 Heidenhain iTNC 530 CNC Control Maximum spindle speed: 6,000 rpm Machine Weight: 10,000 kg, stated on the plate Electrical supply: Three-phase, 415 V, 50 Hz Full-load current: 76 A Compressed-air pressure: 5–7 bar X-axis travel: 1,220 mm Kedpfoz N H Enex Ahbedu Y-axis travel: 710 mm Z-axis travel: 630 mm Table size: 1,300 × 700 mm Maximum table load: 1,500 kg Spindle nose to table: 100–730 mm Spindle centre to column: 740 mm Spindle taper: BT50 Spindle motor: 11 kW continuous / 15 kW at 30-minute rating Spindle transmission: High/low gearbox Rapid traverse, X / Y / Z: 24 / 24 / 24 m/min Cutting feed rate: 1–12,000 mm/min Tool magazine: 24 Station Arm type ATC Maximum tool length: 400 mm Maximum tool weight: 15 kg For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #MAN001 Machine Serial Number: VBD12242 Cost: £24,950+ VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, maximum load weight: 36,410 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list: Complete equipment available upon request. Gooseneck * with angled front corners at approximately 45° and rear taper of approximately 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approximately 30 mm thick Loading Platform * Telescoping loading platform with rear taper of approximately 1,000 mm x 8° * 1 pair of fixed wheel recesses in front of the axles, approximately 2,850 x 970 x 400 mm (L x W x H) * Wheel recesses with square ladder rails approximately 15 x 15 mm, as well as widening in the lower area * A pair of fixed wheel recesses between the 1st and 2nd axles, approximately 1,610 x 970 x 400 mm (L x W x H) Kdjdpez Sh H Hofx Ahbsu * Incl. 3-part removable galvanized covers over the wheel recesses (W approximately 670 mm), max. point load 5 t/piece. * Recess in the taper and extending into the loading platform to accommodate the excavator arm (approximately 2,900 x 750 x 210/290 mm (L x W x H)) * 1 pair of lashing rings lying horizontally at the front of the loading platform (LC 10,000 daN) * 5 pairs of lashing rings that can be folded outwards (LC 5,000 daN) * 2 pairs of lashing rings that can be folded outwards (LC 10,000 daN) * 2 pairs of lashing rings in the excavator arm recess (LC 5,000 daN) * Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Two-part Steel Ramps * One pair of galvanized two-part steel ramps, approximately 2,750 + 1,400 x 800 mm, with hardwood flooring approximately 48 mm thick * Ramp with hydraulically extendable and foldable ramp sections and hydraulic lifting mechanism, hydraulically movable * Maximum load per pair: 40,000 kg * In accordance with Regulation 1230/2012/EU, ramps with a length of less than 300 mm do not need to be taken into account in the vehicle length when in the driving position. Kingpin Supports * JOST kingpin supports (mechanical) with a 2-speed gearbox for an approximate lifting capacity of 24 t (approximate test load 50 t) Axles * BPW axles and suspension, 2 axles fixed, 1 axle steerable * Technical axle load: 12,000 kg each * Electro-magnetic reverse locking system via reverse gear and manually activated Air Suspension * with lifting and lowering valve. Axle tool Tires * 235/75 R 17.5 3PMS – manufacturer of our choice * TPMS: TPMS tire pressure monitoring system in accordance with ECE R 141 * Data transmission to the tractor unit takes place via the standardized EBS interface according to ISO 11992 * For correct display, the tractor unit must be able to transmit and display this data Braking System * WABCO braking system according to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Steel Construction * made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical System * in accordance with EU regulations * LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the turn signal * ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets * Connection according to ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paint Finish * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection * Top coat with 2 layers of 2K topcoat, solid color in R

Condition: used, Year of construction: 2012, power: 31 kW (42.15 HP), input frequency: 50 Hz, input voltage: 400 V, operating pressure: 5 bar, pressure: 5 bar, We are offering this used Ernst TITAN 1400 wide belt sanding machine, manufactured in 2012, for sale. Type: TITAN 1400 Factory number: 800061 Year of manufacture: 2012 Voltage: 400 V Frequency: 50 Hz Kdodsz Sm T Eepfx Ahbou Power: 31 kW Maximum pressure: 5 bar If you have any questions or require further information, please send us a message or call us. The machine is in working order, and accessories are also available, which can also be included. We would be happy to arrange a viewing or discuss the details further.

Condition: excellent (used), Year of construction: 2012, Sumitomo Demag Systec 350/720-2300 / Production Line with Wittmann-Demag DR833 Robot Year of manufacture: 2012 Injection Unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cm³ Clamping Unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping system: toggle lever Control system: NC5 Additional equipment: Euromap 67 Robot interface 5x air valves 1x hydraulically operated core pull with proportional valve 5x hot runner controls Hardened injection unit – bimetal Moog proportional valve on the injection unit – high-precision injection Parallel movements Central lubrication 3 variable-capacity hydraulic pumps Integrated printer Machine has been regularly serviced by authorized Sumitomo Demag technicians Robot Wittmann-Demag DR833 Year of manufacture: 2011 4-axis robot: 3 axes driven by servomotors (electric), Y-axis telescopic; C-axis pneumatic, A-axis movement Axis travel: X-900, Y-1600, Z-3000 Touch control panel Robot safety package Robot with adapter, conveyor belt, and protective enclosure Purchase of the robot and conveyor belt at additional cost Dimensions: Kdsdpfx Ahez Iplmobeu Weight: 15,750 kg L x W x H: 8.26 x 2.01 x 2.27 m All offered machines are started up by our service technicians prior to sale. It is possible to obtain a video of technical tests for the selected machine, or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2012, Arburg 520H 1500-800 e² / Hybrid Machine / Production Line with Side Robot Arburg Multilift H Year of manufacture: 04.2012 Injection Unit: Screw diameter: 55 mm Shot weight: 434 g Kdjdpjz Ip N Esfx Ahbou Injection pressure: 1650 bar Dosage volume: 474 ccm Clamping Unit: Clamping force: 150 t Tie bar distance: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping unit: toggle lever Control system: SELOGICA - Touchscreen Additional Equipment: Hybrid machine: high-speed, energy-saving, and very quiet Control system with air valve Core pull control Hot runner control x 12 Injection unit hardened - bimetallic Main drive motor - servo motor with inverter - energy saving Injection unit driven by servomotor controlled by inverter Machine equipped with cylinder / battery with compressed nitrogen (additional charge for fast operation) Central lubrication Automatic mold height adjustment Kistler sensor - mold pressure regulation The injection molding machine was operated in a so-called "cleanroom," and is fitted with extra protective devices against contamination and two vapor absorbers Side robot Arburg Multilift H Year of manufacture: 2012 5-axis robot: Z-axis driven by servo motor (electric); X, Y, and B axes (rotation) pneumatically operated Robot safety package Robot with adapter, conveyor belt with electric height adjustment, safety enclosure Purchase of robot and conveyor belt at extra cost Dimensions: Weight: 6,820 kg Length/Width/Height: 5.03x1.56x2.21 m All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2012, Arburg 520S 1600-400/170 e² / Production line with Geiger robot Year of manufacture: 2012 Injection unit: Screw diameter: 35 mm Shot weight: 141 g Injection pressure: 2500 bar Dosage volume: 154 ccm Clamping unit: Clamping force: 160 t Tie bar spacing: 520 x 520 mm Platen size: 695 x 695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: 2K injection molding machine with rotary table and Geiger robot Very good technical condition Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 5 Control system with 12 hot runner zones Reinforced injection units – bimetallic Machine with two cylinders / batteries with compressed nitrogen (additional charge for fast operation) Ksdpfez Ip Tdjx Ahbsdu The machine features a built-in servomotor in the injection unit responsible for dosing the plastic Parallel movements Screw diameter in the vertical injection unit: ⌀30 mm - 77 g/PS Integrated Arburg brand conveyor belt and sorting flap Original Weber brand rotary table, highly precise – electrically driven (integrated inverter in the machine) Rotary table and robot available as an additional purchase Dimensions: Weight: 8140 kg Length/Width/Height: 4.81 x 1.84 x 3.45 m All offered machines are started up by our service technicians prior to sale. A video of the technical tests for the selected machine can be provided, or you can participate in live technical tests at our facilities in Łódź. Price: On request

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 6,405 h, load capacity: 3,000 kg, lifting height: 8,300 mm, free lift: 2,800 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 3,700 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,360 mm, fork length: 1,100 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16X7X10 1/2, rear tire type: cushion tires (black), rear tire size: 23X10-12, overall weight: 9,400 kg, empty load weight: 6,400 kg, total height: 2,650 mm, total length: 2,000 mm, total width: 3,100 mm, color: red, Equipment: CE marking, adjustable boom, all wheel drive, front guard, head guard, lighting, pallet forks, sideshift, COMBILIFT C3000GST | 2012 | GAS | Triplex 8300 mm | Condition 5/5 ⭐ Technical specifications: Manufacturer / Model: COMBILIFT C3000GST Year of manufacture: 2012 Operating hours: 6405 h Drive: GAS Lifting capacity: 3000 kg Load centre: 600 mm Mast type: Triplex Kdsdpfx Ahoz I Acljbou Lift height: 8300 mm Fork positioner: 1360 mm Fork length: 1100 mm Own weight: 6400 kg Dimensions: Length: 2000 mm Width: 3100 mm Height: 2650 mm Overall height: 3700 mm Tyres (NEW – 100%) 🆕 Superelastic (solid rubber) Front: 16x7x10 1/2 Rear: 23x10-12 Refurbished condition – corrosion-free ✨ Condition: Technical: 5/5 – fully serviced and inspected 🔧 Visual: Very good – refurbished, like new 👌 Immediately ready for use – no further investment necessary ✅ Warranty included. Transport available 🚛

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 6,663 h, load capacity: 6,000 kg, lifting height: 4,550 mm, free lift: 1,950 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 3,250 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 1,550 mm, fork length: 1,500 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 27X10-12, rear tire type: cushion tires (black), rear tire size: 400/60-15, overall weight: 16,400 kg, empty load weight: 10,400 kg, total height: 2,600 mm, total length: 4,300 mm, total width: 2,300 mm, color: red, Equipment: CE marking, all wheel drive, cabin, head guard, lighting, pallet forks, sideshift, ## 🚜 COMBILIFT C6000SL | DIESEL | 4550 MM DUPLEX MAST | FREE LIFT | FORK POSITIONER | FULLY ENCLOSED HEATED CAB | READY FOR WORK ### ✅ FULLY SERVICED | WARRANTY | WORLDWIDE DELIVERY 🌍 If you are looking for a forklift that delivers value from day one, rather than incurring unexpected maintenance costs, this machine is the perfect choice. We offer a reliable and fully prepared COMBILIFT C6000SL multidirectional sideloader, professionally inspected, fully serviced, thoroughly tested, and ready for immediate operation in production facilities, warehouses, steel service centers, and logistics operations. --- ## ⭐ Key Advantages ✅ Fully serviced before sale ✅ Warranty included ✅ Brand-new super elastic tires ✅ Excellent technical and cosmetic condition ✅ Ready for immediate operation – no additional investment required ✅ Live online machine demonstration available ✅ Direct delivery to your facility available --- # ⚙️ Technical Specifications 🏭 Manufacturer: COMBILIFT 📌 Model: C6000SL 📅 Year of Manufacture: 2012 🏋️ Load Capacity: 6,000 kg 🔧 Engine: Kubota Diesel ⏱ Operating Hours: 6,663 h 📏 Mast: Duplex ⬆️ Lift Height: 4,550 mm ↕️ Free Lift: 1,950 mm 📐 Fork Positioner: 1,550 mm 🔩 Fork Length: 1,500 mm 🚪 Cab: Fully enclosed, heated ⚖️ Service Weight: 10,400 kg ### 📐 Dimensions • Height: 2,600 mm • Length: 4,300 mm • Width: 2,300 mm • Lowered Mast Height: 3,250 mm ### 🛞 Tires Front: 27×10-12 Rear: 400/60-15 Condition: ✅ 100% New --- # 🔧 Equipment ✔️ Fork Positioner ✔️ Free Lift ✔️ Fully Enclosed Heated Cab ✔️ Working Lights --- # 🏭 Ideal For 🌲 Timber Industry 🏗 Steel Mills & Steel Service Centers 🏭 Structural Steel Manufacturers 📦 Handling Pipes, Profiles & Long Loads 🏢 Indoor & Outdoor Applications --- # 🤝 Why Choose FT LOGISTICS? When purchasing from FT LOGISTICS, you are buying from a company specializing exclusively in forklifts, sideloaders, multidirectional forklifts, and warehouse handling equipment. Every machine undergoes a comprehensive technical inspection, full servicing, and operational testing before delivery. We maintain an inventory of over 100 machines available for immediate delivery and supply customers throughout Europe, South America, Africa, Asia, and the Middle East. ### ✅ We Provide ✔️ Full pre-delivery service ✔️ Warranty ✔️ Professional technical support ✔️ Leasing & financing solutions ✔️ Worldwide transport organization ✔️ Export documentation & customs assistance ✔️ Comprehensive after-sales support Ksdpfxsz I A E Ho Ahbjdu --- 🌍 Hundreds of customers across Europe and worldwide trust our equipment and continue to choose FT LOGISTICS for their material handling needs. 📹 We can arrange a live online demonstration, provide additional photos and videos, and prepare a tailored transport quotation for delivery to your facility. 📩 Contact us today for more information or a personalized offer. --- # FT LOGISTICS ### 🚜 Ready-to-Work Material Handling Equipment ### 🌍 Delivered Worldwide

Condition: used, Year of construction: 2011, operating hours: 13,600 h, functionality: fully functional, The used QUASER MV 204 CV vertical machining center is a medium-to-large-sized CNC machine with a cast iron structure, featuring 4 sliding guides (roller type) for the table. It has travels of X 1270, Y 700, and Z 610 mm, a table size of 1400×700 mm, and a maximum load capacity of 1,800 kg. It is equipped with a BT40 spindle operating at 12,000 rpm (max. 15 kW), cooled by a dedicated chiller. High-pressure coolant is supplied through the spindle. It features a RANDOM tool changer with a 30-position exchange arm, RENISHAW TS27 tool presetter, and a chip conveyor for chip evacuation. Year of manufacture: July 2010 (installed in 2012). It includes a FANUC 21i-MB CNC control with manual guide i, card port, serial RS 232 connection, and Ethernet network. Kdodpfxez I Du Aj Ahbju Complete with manuals and CE certificate.

Condition: used, mileage: 69,000 km, power: 78 kW (106.05 HP), first registration: 02/2012, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 01/2027, gearing type: automatic, emission class: euro5, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Net selling price: €4,200 Iveco Daily First registration: 02/2012 Mileage: 69,000 km Error message If you have any questions: VAT can be shown separately. ----Please, no emails / Due to time constraints, we can only process emails sporadically!! Thank you for your understanding. ----Opening hours and further information: Inspection and purchase possible without prior registration: Mon - Thu: 9:00 AM to 4:00 PM Fri: 9:00 AM - 1:00 PM Sat: 9:00 AM - 12:00 PM Address: Tabakried 11 84076 Pfeffenhausen D- Germany If you have any questions: Christian Hirsch Please try again later, as we are often in a customer consultation. ----Service booklet available / Serviced according to schedule: yes Emission class: EURO 4 Environmental badge: green Previous owners: 1 VAT can be shown separately: yes Emission class: Euro 4 = Green badge - With / without air suspension in stock - Rear view camera - LED Kedpfx Ahoz Nvdaobsdu - Interior lighting with motion sensor - Cargo area length 4.35m - Cargo area width 2.05m - Cargo area height 2.07m Foldable passenger seat Interior features: Cup holder, Power steering Exterior features: Sliding door, Electrically adjustable & heated side mirrors, Central locking with remote control, Electric windows - front Technology: Outside temperature display On-board computer Safety & Environment: Driver airbag, electric Immobilizer ABS ESP Traction control Particulate filter If you have any questions: Christian Hirsch If you have any questions: Christian Hirsch Please try again later, as we are often in a customer consultation. More offers at / More offers at / Equipment determined using a VIN query; technical errors may occur. Opening hours and further information: Inspection and purchase possible without prior registration: Mon - Thu: 9:00 AM to 4:00 PM Fri: 9:00 AM - 1:00 PM Sat: 9:00 AM - 12:00 PM Address: Tabakried 11 84076 Pfeffenhausen D- Germany ---- The information provided on the internet is a non-binding description. It does not constitute a guarantee. The seller is not liable for typing and data transmission errors / changes / input errors. Errors and prior sale are reserved.

Condition: used, Year of construction: 2012, machine number type model year clamping force distance between opening stroke screw shot volume tie bars diameter ton mm mm mm cm3 Kdedpfx Ahszykzisbsu 1 2000-1450 S+ 2011 200 530x530 550 62 845 E-screwdrive 2 2000-850 S+ 2012 200 530x530 550 52 499 E-screwdrive 3 2000-850 S+ 2012 200 530x530 550 45 374 E-screwdrive 4 2500-850 S+ 2006 250 585x585 575 45 374 E-screwdrive 5 2500-1450 S+ 2009 250 585x585 575 62 845 E-screwdrive 6 3300-2150R S+ 2010 330 630x630 620 62 513 E-screwdrive 7 3300-5650 SXS 2006 330 630x630 620 84 1247 E-screwdrive 8 4400-3550 S+ 2010 440 730x730 720 72 1547 E-screwdrive 9 4400-3550 S+ 2010 440 730x730 720 72 1547 E-screwdrive 10 4400-5650R-2K SXS 2007 440 845x845 850 84 1247 E-screwdrive 11 4400-5650R-2K SXS 2007 440 845x845 850 84 1247 E-screwdrive 12 4400-5650R S+ 2008 440 730x730 720 84 1247 E-screwdrive 13 4400-5650 S+ 2009 440 730x730 720 84 2494 E-screwdrive 14 5500-5600 SXN 2000 550 830x830 850 98 3394 Hydraulic motor 15 5500-5650R 2K S+ 2009 550 830x830 850 84 1247 E-screwdrive 16 5500-5650R 2K S+ 2011 550 830x830 850 84 1247 E-screwdrive 17 6600-8650R S+ 2008 660 900x900 940 98 1886 E-screwdrive 18 6600EP-8650 S+ 2009 660 1000x1000 1200 115 5349 E-screwdrive 19 6600-8650R S+ 2010 660 900x900 940 98 1886 E-screwdrive 20 12000-19000 SXN 2003 1200 1200x1200 1500 150 12193 Hydraulic motor