Used Okuma Lt2000 Ex-My 2St for sale (6,980)

Condition: good (used), Year of construction: 2005, The machine has received annual maintenance under a service contract with Okuma. Okuma Mac Turn 550 W / 9-axis Turning-Milling Center Year of manufacture: 2005 Control: OSP-E 100 L / extension kit “M”, One Touch IGF kit Milling spindle slide: X/Y/Z/B axes Sub-spindle W axis Main spindle with C axis Sub-spindle with C axis Lower turret slide X/Z axes Max. turning diameter: 720 mm Turning length: 2,000 mm Distance between tailstock tip and spindle nose: 2,505 mm Y-axis travel: 250 mm (+/- 125 mm) Main spindle speed: up to 3,500 rpm Spindle power: 30 kW Lower turret: 12 stations without driven tool stations Lower turret with steady rest, thus only 9 stations instead of 12 Self-centering steady rest: 35 - 240 mm Milling spindle continuous B axis: 0.001° Tool magazine: 80 stations HSK 100 tool interface New Forkhardt 3-jaw chuck Ø 400 mm (value: €12,000) Sub-spindle without chuck, currently equipped with mandrel / supplied without mandrel Enlarged main spindle bore 110 mm (Ø 150/110 mm) Spindle nose size 11 2-stage clamping pressure Sub-spindle as hollow shaft motor, speed up to 3,800 rpm Ethernet LAN interface Renishaw in-process measurement Additional measurement system on Y axis Tool length 450 mm instead of 350 mm Door automation on both doors Chip conveyor Gravity band filter with clean tank, 900 liters Frequency-controlled supply pump, up to 20 bar The machine has received annual maintenance through a service contract with Okuma. In 2023, the cable drag chain of the W axis, including all hoses, was replaced. In October 2024, the linear guides for X/Y/Z were replaced. Work performed by Okuma: - Machine cleaned - Sheetmetal parts and covers dismantled - 8th axis dismantled - Traveling column dismantled and removed from the machine - ATC removed and taken out of the machine - All linear guides removed - Mounting surfaces of the ZA axis cleaned - New linear guide ZA including carriages installed and tightened to spec - New ball screw ZA including bearings mounted and fitted - Baseplate of the traveling column installed and bolted to spec, carriages fastened, lubrication lines connected - ATC and auxiliary parts reinstalled and connected - New YA and XA linear guides installed and tightened to spec, new YA ball screw with bearings installed - Traveling column set in place and lubrication lines connected, XA baseplate installed and aligned - 8th axis installed and aligned - H1 turret installed - 8th axis drive motor installed - Install 8th axis and new H1, set up geometry - Function test 8th axis and H1 Hfsdpfx Aoyt Nvtog Iog - Run-in program for B axis, approx. 12 hours, then drain old oil from 8th axis - Run-in program for H1 and prepare defect report for OEG - Left door installed, various sheetmetal parts adjusted - Chuck installed - Adjust zero points - Check tool change

Condition: ready for operation (used), Year of construction: 2005, controller manufacturer: OKUMA, controller model: OSP E-100M, number of axes: 4, This 4-axis Okuma MA-600HB horizontal machining center was manufactured in 2005. Ideal for complex machining tasks, it offers robust construction and precision. Consider the opportunity to buy this Okuma MA-600HB horizontal machining center. Contact us for more information. Additional equipment • Balluf read/write • Renishaw MP10 • 30 Bar coolant • Mayfran Consept 2000 Machine Benefits Technical Machine Benefits • Nc table (0. 001-degree accuracy) • Atc with 320 places (80 places for 600 mm tools) • Tool breakage control • Mop tool control Extra Information Machine still under power Hjdpfxjx D Nlzj Ag Ijfg

Condition: good (used), Year of construction: 2004, Opportunity to buy a 5 axis OKUMA machining center with EROWA automation. Including: EROWA Robot Easy automatic loading cell Chip conveyor Heavier coolant pump Higher Spindle speed Automatic measurement system for tool length, diameter setting, and tool breakage detection with a Renishaw laser Automatic measurement function, Renishaw MP10, BT40 Full technical specifications in the attached document. This machine is in very good condition and can be inspected under power upon appointment. Availability: 03/2026 CNC control Okuma OSP-E100M X-axis 762 mm Y axis 460mm Z axis 460mm C axis 360° Table size 400 mm Table load 300 kg Spindle mounting BT40 Big plus spindle Tool changer capacity 32 positions Hfjdpfx Ageyfht Us Ieg Spindle speed 50-15,000 rpm Spindle hours approx 42000h Cutting hours approx. 38000h Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: good (used), Year of construction: 2004, functionality: fully functional, CNC turning and milling center with 9 CNC axes, Okuma Mac Turn 350 W, year of manufacture 2004, OSP-E 100L, 80-position tool magazine, main spindle with C axis, sub spindle with C axis, Y-axis upper slide/milling spindle, HSK 63 tool holder, infinitely variable B axis as milling spindle, center distance 1500 mm, spindle bore 80 mm, max. swing diameter 550 mm, turning diameter 350 mm, lower turret with 12 stations and driven tools, Interlite compact filter system 900 l, extraction system, spindle operating hours approx. 18,300 h, chip conveyor, tool changer gripper arm completely renewed, high-pressure cooling, tool measuring arm, tool changer overhauled, main spindle Kitagawa B - 210, sub spindle Kitagawa B - 208. Hsdpfjy Atu Tox Ag Iofg

Condition: good (used), Year of construction: 2007, functionality: fully functional, CNC lathe Okuma LU 300 M 2SC1000 Control: OSP-P200L Year of manufacture: 2007 Internal machine no.: 26 Turning length: 1,000 mm Hfodsyyk I Ejpfx Ag Ijg Turning diameter: 340 mm Swing diameter over bed: 530 mm Swing diameter over carriage: 410 mm Spindle bore: 72 mm Spindle speed: 45 – 5,000 rpm 2 tool turrets A turret: 12 tool positions (live tooling) B turret: 8 tool positions Equipment: Tailstock Transformer Touch setter Chip conveyor OneTouch IGF

Condition: used, Okuma LB400 Hfjdpfxey Apq Rs Ag Ijg

Condition: used, Okuma LB45 Hedpfsy Apqqjx Ag Isfg

Condition: used, Horizontal machining center, 6 pallets Priced to sell - dismantled and loaded into truck OKUMA MA40 HA 6P OSP U100M CNC 6 pallets 400mm x 400mm max 400 kgs max workpiece dimensions 600*710 Spindle BT40 / coolant through the spindle 4th axis 1° Tool changer: 100 pos. 200 TOOLHOLDERS ARE AVAILABLE X = 560mm, Y = 610mm, Z = 560mm 40 m/min under power Mimu Machine Tools (Italy) X: 560 Hsdet Ek Slspfx Ag Ijfg pallet: 6 Pallet size: 400*400

Condition: good (used), Parts shown by hand not come. Hedpfoyb R Erex Ag Iofg

Condition: used, OKUMA LB 10 II M is a CNC turning lathe, engineered for precision, high accuracy and reliability. Capacities: swing over cross‑slide 340 mm, over bed 480 mm, max turning Ø 170 mm, spindle hole 51 mm, max length 300 mm, bar passage 42 mm; travels Z350/X150 mm; rapid Z20/X15 m/min. Turret 12 pos., 12 driven tools; C‑axis res. 0.01°; spindle 50–6000 t/min; voltage 3x400 V 50 Hz; weight ~3400 kg; footprint 2000×1640×1780 mm. Accessories: lamp, coolant system, bar feeder, chip conveyor. Enables tight tolerances; suitable for automotive, aerospace, medical, watchmaking and precision machine tool applications. Hfedpfxsyxnx Es Ag Ijg

Condition: used, OKUMA LB 200 M is a CNC turning lathe for high‑precision machining, accuracy and reliable operation. Capacities: turning Ø over cross‑slide 420 mm; swing over bed 530 mm; spindle hole 53 mm; max Ø 300 mm; travels Z 335 mm, X 180 mm. Specs: rapid traverse X 25 m/min, Z 30 m/min; spindle speeds 50–6000 t/min; 3x400 V 50 Hz; total power 16 kVA; weight ≈3300 kg; dims 2035×1720×1700 mm. Equipment: 12‑position fixed‑tool turret; tailstock Morse 4, spindle stroke 80 mm, Ø 55 mm. Enables tight tolerances; typical sectors: automotive, aerospace, medical, machine building. Hfodpfx Aoyxnxxeg Ijg

Condition: ready for operation (used), Year of construction: 2000, operating hours: 21,269 h, functionality: fully functional, machine/vehicle number: 0082, turning length: 1,500 mm, turning diameter: 580 mm, travel distance X-axis: 598 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,660 mm, TECHNICAL DETAILS Travel X-axis: 598 mm Travel Y-axis: 230 mm Hfsdpfx Agsyxmyue Ieg Travel Z-axis: 1,660 mm Max. turning diameter: 580 mm Turning length: 1,500 mm Swing diameter over bed: 610 mm Swing diameter over cross slide: 580 mm Main Spindle Main spindle speed range: 12 - 2,800 rpm Spindle bearing diameter: 150 mm Spindle bore: 110 mm Spindle nose: JIS A2-11 Main spindle drive power: 37 (30) kW C-axis accuracy: 0.001° Rapid traverse X/Y: 12,000 mm/min Rapid traverse Z: 20,000 mm/min Rapid traverse C: 100 rpm Cutting feed rate: 0.001 - 1,000 mm/rev Tool Turret Type: H2 ATC Number of tool stations: 2 (1x L-Tool / 1x M-Tool) positions Driven stations: stepless Speed range - driven tool stations: 40 - 3,000 rpm Tool shank height: 25 mm Boring bar holder diameter: 50 mm Tailstock Quill diameter: 120 mm Quill stroke: 170 mm Tailstock taper: MT 5 Tool Magazine Number of tool stations: 50 positions Tool holder: MAS BT 50 Max. tool diameter: 170 mm Max. tool length: 350 mm Max. tool weight: 20 kg Magazine drive: 3.2 kW MACHINE DETAILS Total power requirement: 53 kVA Dimensions & Weight Space requirement: 6.0 x 3.2 x 3.0 m Machine weight: 18.5 t Operating Hours Main switch on-hours: 79,607 h NC operating hours: 27,814 h Main spindle hours: 21,269 h EQUIPMENT Chip conveyor Central coolant system High-pressure coolant system, 20 bar Tailstock Signal lamp C-axis Y-axis Hydraulic unit Steady rest Various tool holders (44 pcs.) Three-jaw chuck Schunk - ROTA NC 400-120 Electronic handwheel

Condition: good (used), Year of construction: 2008, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,000 mm, controller model: OKUMA OSP P200M, total height: 3,150 mm, total length: 6,500 mm, total width: 3,000 mm, table width: 630 mm, table length: 630 mm, rotational speed (max.): 6,000 rpm, overall weight: 22,500 kg, spindle speed (min.): 6,000 rpm, number of spindles: 1, number of slots in tool magazine: 150, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The Okuma MA series is a horizontal machining center with large travels for heavy-duty machining. The X/Y/Z travels are 1000/900/1000 mm. This machine is designed for very high precision and, above all, stability when machining large workpieces. The pallet size is 630 x 630 mm. - OSP P200M - Year of manufacture: 2008 Hedpfx Aeyg Rb Rjg Iefg - Cutting time: 17,500 h - Renishaw Tool Eye - ATC 150 SK50 - 2-pallet system - Spindle speed: 6,000 RPM - B-axis NCB 0.001 degree - X/Y/Z 1000/900/1000 mm - Mayfran Consept coolant system with chip conveyor and high-pressure pump 60 bar

Condition: good (used), Year of construction: 2007, operating hours: 14,500 h, functionality: fully functional, turning diameter over cross slide: 370 mm, turning length: 1,000 mm, turning diameter: 340 mm, spindle bore: 62 mm, spindle speed (max.): 5,000 rpm, total height: 1,900 mm, total length: 3,200 mm, total width: 2,200 mm, overall weight: 7,500 kg, Equipment: documentation/manual, rotational speed infinitely variable, OKUMA LB300MC1000, OSP P200L control, V12 turret VDI40, V12 driven tools VDI40, manual tailstock, chip conveyor, coolant pump, standard spindle 5000 RPM, touch setter, Hfsdpfx Agoymfmno Iog

Condition: good (used), Year of construction: 2008, functionality: fully functional, Okuma Multus B300-W 6-axis turning and milling center - Okuma OSP P200L Hfedpfoyg Rf Njx Ag Ieg - Year 2008 - Cutting time: 10,500 h - H1 milling spindle: 6,000 rpm - Main spindle: 3,800 rpm, Rota NC 315-86 - Counter spindle: 5,000 rpm - ATC 60 system HSKA-63 (60 tools) - Geometry: very good - Marpos tool sensor

Condition: good (used), Year of construction: 2004, operating hours: 11,287 h, functionality: fully functional, turning diameter over cross slide: 370 mm, turning length: 1,000 mm, turning diameter: 350 mm, spindle bore: 62 mm, spindle speed (max.): 5,200 rpm, Equipment: documentation/manual, rotational speed infinitely variable, Okuma LU300 MC-1000 Hodsylpzaspfx Ag Ijfg A-turret VDI40 with 12 positions, all driven (M-tools), B-turret VDI40 with 8 positions, Touch Setter for both A & B turrets, manual tailstock, chip conveyor, 8 bar coolant pump, extraction system, Samsys Multi-3000 bar feeder, chucks & tools available as options.

Condition: good (used), Year of construction: 2002, functionality: fully functional, spindle speed (min.): 3,200 rpm, total height: 1,700 mm, total length: 2,700 mm, total width: 1,900 mm, overall weight: 6,500 kg, Equipment: documentation/manual, rotational speed infinitely variable, OKUMA ES L II-M Year 2002 Hedsyna Uispfx Ag Iofg A small, very compact lathe with extensive capabilities. Control U-10L, parts catcher, touchsetter, V12 turret VDI 30— all driven positions, manual tailstock, chip conveyor, coolant pump, bar feeder Samsys MUS-3000 year 2007, including equipment, SMW chuck KNCS-N210-52, package with jaws and 24 tools optionally available.

Condition: good (used), Year of construction: 2001, functionality: fully functional, spindle speed (min.): 5,000 rpm, travel distance X-axis: 700 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 25 rpm, type of input current: three-phase, Equipment: rotational speed infinitely variable, TECHNICAL DETAILS 2x Pallets 500 x 500 mm Travel distances X: 700 mm, Y: 800 mm, Z: 700 mm Table size: 500 mm x 500 mm Hfsdpfx Agsyrgzko Isg Rotary table/B-axis: indexed in 1° steps, 360 positions Table load capacity: 800 kg Spindle speed: 5,000 rpm Distance spindle nose to table surface: 150 mm - 850 mm Tool holder: MAS BT 50 Tool magazine (ATC): 60 positions, chain magazine Maximum tool length: 450 mm MACHINE DETAILS Control: CNC OSP 100M Dimensions & Weight Machine weight: 21,000 kg Dimensions (L x W x H): 5,500 x 3,160 x 3,300 mm Spindle hours: 18,500 EQUIPMENT Chip conveyor, coolant system, and pocket filter system for internal cooling

Condition: good (used), Year of construction: 1999, functionality: fully functional, Okuma Macturn 30 1SW 1000, OSP 7000M, chip conveyor, ATC 24 BT40, coolant pump 8 bar, gear milling option, approx. 12,500 spindle hours, HS Big Bore, GS Standard Bore Hfodpfx Agsvta Rke Ieg Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, a tour of our showroom (30 Okuma machines) including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. Bjsvkhv0lno We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage.

Condition: good (used), Year of construction: 1998, functionality: fully functional, OKUMA LCC15, OSP 700L, collet chuck, chip conveyor, coolant pump, touch setter, chip conveyor, parts catcher, V12 turret direct mounting. Hsdpfxeyq S E Sj Ag Ijfg A very compact and efficient machine for bar stock workpieces. * The LNS bar feeder is included free of charge with the machine, but it is not part of the sale and must be electronically serviced by an LNS technician.

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 780 mm, travel distance Z-axis: 780 mm, total height: 31,500 mm, Equipment: documentation/manual, rotational speed infinitely variable, Dear customer, we have an Okuma MA 500 HB 6APC in good condition in stock for you. We look forward to your inquiry and remain with best regards, Your Neff - The Okuma Specialist Team Data sheet: Control: OSP P200-M Travel paths X-axis: [mm] 900 Y-axis: [mm]: 780 Z-axis: [mm]: 780 B-axis: [degrees] 1; 360 degree incrementation Tool changer 200 ATC MAS BT50 Tool positions: 200 Tool holder: MAS BT50 Maximum tool weight: [Kg] 500 Maximum tool length: [mm] 450 Main spindle Max. speed: [1/min] 6,000 Drive power: [kW] 33 Pallet station 6 APC Pallet dimensions: [mm] 500×500 Workpiece weight: [Kg] 950 Hedpfx Agevta Sbj Iefg Workpiece size: [mm] 800×1000 Other features: – Renishaw Probe – Renishaw Tool Break Control – Mayfran Concept with high pressure pump Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, viewing in our showroom including demonstration and Acceptance, loading, transport, assembly and commissioning of the machine as well as instructions and subsequent service. We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit our homepage.

Condition: good (used), Year of construction: 2008, functionality: fully functional, spindle speed (min.): 25 rpm, spindle speed (max.): 5,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, Okuma Multus B300-W 6-axis turning and milling center - Okuma OSP P200L Hedpjyiu Dbefx Ag Isfg - Year of manufacture: 2008 - Cutting time: 13,900 h - H1 milling spindle: 6,000 rpm - Main spindle: 3,800 rpm - Sub spindle: 5,000 rpm - ATC 60 system HSKA-63 (60 tools) - Geometry in very good condition - Marpos tool sensor - Chip conveyor & coolant system with small band filter unit - Optionally extensive tool accessories available

Condition: used, Year of construction: 2008, operating hours: 18,349 h, turning length: 1,000 mm, turning diameter: 340 mm, spindle speed (max.): 4,800 rpm, Produced in 2008, cutting time 18,349 h, OSP P200L, 4-axis double turret VDI40, A-turret VDI40 V12 with live tools, B-turret VDI40 V8, turning diameter 340 mm, turning length 1000 mm, standard spindle bore, main spindle 4800 rpm, tailstock, manual, touchsetter, chip conveyor, coolant station, in good working and geometric condition, optional tools available. Hsdpoyu N Uxjfx Ag Iefg

Condition: good (used), Year of construction: 2002, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Okuma MB56VA 3-axis vertical machining center U100M ATC 32 SK40 Main spindle 12,000 rpm Oil mist extraction Cutting time 9,675 h Hfsdpjyiu D Iefx Ag Ijg Chip conveyor Coolant system Preparation for A-axis (4th axis) *Optional: large selection of SK40 tools to suit the machine

Condition: good (used), Year of construction: 2000, CNC Lathe Okuma LB 300-M Control: OSP-U100L Year of manufacture: 2000 Internal machine no.: 16 Turning length: 1,000 mm Turning diameter: 430 mm Spindle speed: 4,200 rpm Tool turret: 12 positions (driven) Mount: VDI 40 Equipment: One touch IGF Chip conveyor Touchsetter 3-jaw chuck Tailstock Parts catcher Short bar loader Samsys 3000 (optional) Hfjdpfx Agjylv Uts Ieg