Used Memmert Ipp 55 for sale (10,580)

Year of construction: 2018, condition: used, Working width: 2,500mm, air flow rate: 1,600m³/h, motor power: 1.5kW. Equipment: integrated under-table extraction system, radial fan with spark protection, filter elements below the wooden grate, pneumatic filter cleaning, direct air recirculation, wooden grate with defined gap spacing, galvanized and painted sheet steel, integrated motor protection switch and compressed air supply, CE marking. On-site inspection is possible. Nsdpjz R A Nrefx Ab Asdc

Condition: good (used), Year of construction: 2002, functionality: fully functional, I sell a block machine for formatting scantlings into pallet blocks. Possible dimensions of blocks from 70 to 160. very good condition. Ndodpsvbcl Hsfx Ab Ajc

Condition: good (used), Year of construction: 2023, operating hours: 159 h, Used, oil-free, variable 55 kW screw compressor Immediately available! (Subject to prior sale!) ALMIG LENTO 55 WK (water-cooled) with Air Control Premium controller The compressor is in very good condition and has only run for 157 hours so far. Year of manufacture: 2023 Operating hours: 157 h Technical data Type: LENTO 55 WK Possible operating pressures of the system(continuously adjustable): 5 - 12 bar Delivery rate at minimum/maximum speed, measured according to ISO 1217 Annex C: at 5 bar min/max: 1.41 / 7.79 m³/min at 6 bar min/max: 1.40 / 7.74 m³/min at 7 bar min/max: 1.39 / 7.69 m³/min at 8 bar min/max: 1.38 / 7.64 m³/min at 9 bar min/max: 1.37 / 7.59 m³/min at 10 bar min/max: 1.35 / 7.29 m³/min at 11 bar min/max: 1.34 / 6.97 m³/min at 12 bar min/max: 1.33 / 6.71 m³/min Nsdpfx Abexud Eqj Aedc Rated power of drive motor: 55 kW Protection / insulation class of drive motor: IE 3Protection / insulation class of fan motor: IP 54 / H Operating voltage / frequency at min. / max. speed: 380 / 41/200 V/Hz Residual oil content: 0 mg/m³ Cooling water requirement at 100% load( at inlet +15° / delta t = 15 K ): 55 l/min Cooling water outlet (max): 45 °C Cooling water pressure (min / max): 2 / 10 bar Cooling water quantity (min / max): 140 l/min Cooling water quality according to the valid "ALMiG cooling water conditions" Pressure dew point of refrigerant dryer at 50% load: 3 °C 100% load: 3 °C Sound pressure level (DIN 45635 T.13) soundproofed, at 50% load: 75.6 dB(A) 100% load: 78.2 dB(A) Length: 2,300 mm Width: 1,400 mm Height: 1,580 mm Weight: 1,690 kg Compressed air connection: G 1 1/2 inch Visit our shop, we always have a large number of new and used compressors in stock.

Condition: excellent (used), CTS Temperature testing chamber T-55/1000 Li, water-cooled Temperature range: -50°C to +100°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Rated current: 18 A Compressor: TFH2511Z / TFH2511Z, refrigerant R404A/R23 The type designation of the CTS chamber series is as follows: e.g., Type T -55/1000/Li 1) T means: Temperature 2) -55 means: lower temperature -55°C 3) 1000 means: 1000-liter test chamber volume 4) Li means: special equipment for testing with lithium-ion batteries Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for customer-specific control of the test item Test chamber lighting: energy-efficient, bright LED light strip mounted on the door Insert rack: Stainless steel, support surface 970 x 980 mm Load per rack max. 35 kg Total load with max. rack load 100 kg 1a Conduit NW50 1b Conduit 2x NW125 1c Conduit 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Thermal compensation approx. 4000 W at +20°C approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test item, without thermal compensation and without additional equipment. Options can affect the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, Width, approx. 860 mm, Depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, Width, approx. 1270 mm, Depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (measured according to DIN EN ISO 3744 at a distance of 1 m from the front) Weight approx. 1000 kg Heat dissipation to the installation room 10.4 kW Refrigeration unit: water-cooled, low-noise, fully hermetic stepless power adjustment by electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 For your safety as a buyer, the following information! The following points are carried out on our offered chambers in advance: Ndsdozg Ty Uspfx Ab Aec 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have on the phone.

Condition: excellent (used), Part suitable for: cars Ndsdpfex N R Siex Ab Asc Technical condition: very good Optical condition: very good

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 95428, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,600 kg, workpiece length (max.): 1,200 mm, TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 450 mm Ndjdsyhn Hgepfx Ab Ajc Table length: 750 mm Table width: 600 mm Maximum workpiece length: 1,200 mm Maximum workpiece width: 850 mm Maximum workpiece height: 400 mm Maximum workpiece weight on table: 1,600 kg Tool changer (number of tools): 24 Maximum electrode weight: 100 kg MACHINE DETAILS Connection: 50 Hz 3x 400 V Dimensions & weight Dimensions (L x W x H): 3,150 x 2,750 x 2,960 mm Machine weight: approx. 4,500 kg EQUIPMENT C-axis Tool holder system EROWA Fire suppression system Lamp

Condition: good (used), We offer the Marel Scanvaegt B-55 Portion Cutter, designed specifically for precise portioning of boneless meat. The machine is ideal for portioning beef, pork, veal, and lamb, where cutting accuracy, consistent portion weight, and high production line efficiency are critical. This is the solution for meat processing plants that want to reduce raw material waste, increase automation, and achieve a uniform, professional cutting result. The B-55 model uses 360° scanning, which ensures that even invisible areas of the product are captured. This allows for even more accurate portion calculation and improves cutting precision. Additionally, the unique design of the V-shaped conveyor and the product stabilization system eliminate uncontrolled movement of the meat during slicing. In practice, this means more consistent portions, greater accuracy, and better control over the entire process. The machine achieves a cutting speed of up to 600 cuts per minute, making it a highly efficient portioning machine for industrial use. Weighing and portioning accuracy is at a very high level: for portions over 100 g: 98 – 99% for portions under 100 g: deviation of 1 – 2 g This makes the SCANVAEGT B-55 the ideal choice for both larger steaks and premium portions, as well as smaller portions prepared for retail sale or further packaging. Technical specifications: Manufacturer: Scanvaegt Model: B-55 Machine type: Portion Cutter Year of manufacture: 2004 Power supply: 3×400 V Frequency: 50 Hz Total power: 10 kW Current: 20 A Cutting speed: 600 cuts/min Height: 1800 mm Width: 3332 mm Nodpfsyxmcpsx Ab Aedc Length: 1650 mm Additionally included: additional belts and chain Key advantages of the SCANVAEGT B-55 precise portioning of boneless meat, 360° scanning for improved accuracy, V-shape conveyor stabilizing the product during slicing, high performance – up to 600 cuts/min, very good portion accuracy, ideal for beef, pork, veal, and lamb, additional belts and chain included, robust construction for industrial use.

Condition: good (used), Lippelt Mini Rustica GS, fully functional with 3 cutting rollers, moistening system and poppy seed spreading. The dough sheeting machine is mobile on wheels: Operates on 380 volts, 1 kW. Nsdpfsy E Ntwex Ab Asdc

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 5000014, Year of construction: 2008, operating hours: 1,813 h, fuel type: diesel, power: 74.5 kW (101.29 HP), empty load weight: 4,700 kg, TECHNICAL DETAILS Power: 74.5 kW Max. tractive force: 35 kN MACHINE DETAILS Drive: 4x4 Ndjdpfx Asy Iakxeb Asc Engine: Perkins (diesel) Unladen weight: 4,700 kg Operating hours: 1,813 h EQUIPMENT Closed cabin HUSS exhaust filter system Transport/industrial coupling Simple, robust design (low susceptibility to failure)

Year of construction: 1989, condition: used, x-travel 1100 mm y-travel 600 mm z-travel 500 mm Control Heidenhain TNC 335 B* Ndsdpfxed Ih Rxj Ab Aec tool taper SK40 table surface - upper 1650 x 700 mm table face - lower 1870 x 300 mm spindle speed: 3000 Upm spindle motor ca. 9 kW control defekt!!!!! Horizontal and vertical milling Position change of the head is done manually-hydraulically Vertical head with drilling quill, drilling depth 100 m

Condition: used, Motor clamping rails, motor clamping rails, motor clamping system, for electric motor, gear motor -Motor tensioning rail: 2 pieces -Groove width: 14 mm, length 380 mm Nedpfx Aeux R U Ueb Ajdc -Hole spacing: 470 mm / Ø 14 mm -Delivery/Price: complete -Dimensions: 500/55/H72 mm -Weight 3.1 kg/piece

Condition: used, Motor clamping rails, motor clamping rails, motor clamping system, for electric motor, gear motor Ndodpfx Aoux Sa Sob Aoc -Motor tensioning rail: -Groove width: 14 mm, length 360 mm -Hole spacing: 460 mm / Ø 16 mm -Number: 4x tension rail available -Price: per piece, minimum order 2 pieces -Dimensions: 505/55/H65 mm -Weight 3.0 kg/piece

Condition: like new (used), Year of construction: 2021, operating hours: 1 h, functionality: fully functional, machine/vehicle number: UC 2109/29604202, power: 55 kW (74.78 HP), rotational speed (max.): 1,500 rpm, input voltage: 415 V, input frequency: 50 Hz, input current: 93 A, type of input current: three-phase, type of cooling: air, protection type (IP code): IP55, Siemens drive motors 55 kW Nedpfxox Hizdo Ab Aedc Speed controllable via frequency inverter As-new motors, never used

Condition: ready for operation (used), Vogel Spandau Pumpen PS 1556-530 submersible pump SN: 312413 – pump length: 55 cm, used, in good condition, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire separately for costs of packing and shipping! Ndsdpfox Dwhwsx Ab Asc

Condition: new, functionality: fully functional, Drill-milling machine FM 55 HSV equipped with height adjustment of the milling head via an auxiliary motor and automatic quill feed. The basic configuration already includes all essential accessories (3-axis digital readout, power feed for the milling table, central lubrication, cooling device, LED work light, cast iron base with coolant channel, CE-compliant safety equipment), making this machine suitable for universal applications. Standard equipment includes automatic quill feed and threading mode Rapid X-axis table adjustment thanks to automatic feed with rapid traverse function Cast iron machine base ensures vibration-free operation Enhanced productivity thanks to the standard 3-axis positioning display Two-stage motor with 12 selectable speeds (75 – 3200 rpm) Versatile use – e.g. slot milling, surface milling, boring, etc. Milling head tilts both sides for angled drilling, edge milling, etc. Stability due to dovetail guideways for the gear head Dovetail guideways in the X, Y, and Z axes, adjustable via gib strips Convenient milling head height adjustment by motor Manual central lubrication for all guideways Ndsdpfx Aoytdy Tsb Asc Technical specifications Max. drilling capacity: 32 mm Max. drilling capacity in castings: 40 mm Max. face mill diameter: 80 mm Spindle/column distance max.: 220 mm Spindle/table distance: 95 – 485 mm Quill stroke: 120 mm Automatic quill feed – range: (3) 0.10 / 0.18 / 0.26 mm/rev Min. spindle speed: 75 rpm Max. spindle speed: 3200 rpm Speed change – number of steps / stepless: 12 Spindle taper: MK 4 Table size – width: 800 mm Table size – depth: 240 mm Travel in X-axis: 420 mm Travel in Y-axis: 200 mm Head vertical adjustment: 390 mm Head swivel: -60° to +60° T-slots (number, size, spacing): 14 mm Quill vertical lifting motor power: 90 W Motor power: 1.5 / 2.2 kW Motor power S1 100%: 1.1 / 1.5 kW Voltage: 400 V Dimensions – width: 1270 mm Dimensions – depth: 960 mm Dimensions – height: 2120 mm Weight approx.: 447 kg Scope of supply 3-axis digital readout ES-12V LCD 3–16 mm / B16 quick-action drill chuck Drill chuck arbor MK 4 / B16 Spindle M 16 Reducer sleeve MK 4/3 Combined milling arbor MK 4/27 mm Automatic quill feed Height-adjustable safety guard Milling head lifting motor Central lubrication X-axis table feed AL 450 D LED work lamp Electronic spindle speed indicator Electronic quill stroke indicator Thread-cutting mode Slat safety guard Cooling system Longitudinal scale Cast iron base with coolant system Operator tools

Condition: ready for operation (used), * Brand: RN Maschinenbau * Surface: length 5500 mm, width 2300 mm - 3 decks * Driving: 30 kW E-motor * Incl.: springs. Nedpeywmpgefx Ab Ajdc

Condition: new, color: black, driver cabin: other, gearing type: other, Vehicle location: Bovenden, hydraulic side locking system. Body: 26t hooklift system for containers from 4.3m to 6.6m, hook height 1,570 mm, titanium model, hydraulic combined container locking (internal and external), mechanical pickup hook locking, plastic cover over control block, pneumatic cab controls, full-speed mode, oil tank supplied with 2" hoses & connection materials, 84L standard pump, mounting kit torsion-resistant for 14 mm bolts, device length: 5,500 mm! 4th control block for additional hydraulics. Surcharge for retrofitting with radio control: 6,000.00 EUR. Underrun protection available at extra cost! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, intermediate sale, and errors! Ndjdpfxswngnkj Ab Ajc

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone Nedpfow Dnx Njx Ab Aedc -Mounting: Hole shaft cone Ø47-55 mm, thread M60 see photos -Grindstone: 400 x 40 mm, unfortunately without type designation -Transport dimensions: Ø 400 x 85 mm -Weight: 31.1 kg

Condition: good (used), functionality: fully functional, Year of construction: 2003, In good condition, 2 units Ndsdjw Ihibopfx Ab Aec

Condition: used, Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Swallowtail: 145 by 175 mm 29 mm high -Drawing with the photos -Number: 1x counter bearing available Njdpfec Spm Rsx Ab Aedc -Price: per piece -Dimensions: 265/125/H230 mm -Weight: 15.8 kg

Condition: excellent (used), Year of construction: 1995, upon request Njdpfx Ajfxgmgeb Ajdc

Condition: used, Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Angle: 90° -Dimensions: 55 x 133 mm, see drawing in the photos -Length: 365 mm Nedofz Rd Aepfx Ab Aodc -Weight: 9.8 kg

Condition: good (used), Drill press, drill press, stand drill, pillar drill -Manufacturer: WMW, column drilling machine type CM 10S/55 Ndedpfjfunydjx Ab Aec -Motor: 630 W -Speeds: 460 - 2190 rpm -Translation: via V-belt -Table size: 220 x 280 mm -spindle taper: MK1 -Spindle stroke: 70 mm -Projection: 200 mm -Pillar Ø: 85 mm -Dimensions: 400/800/H1670 mm -Weight 206 kg

Condition: used, Energy chain, cable drag chain, energy chain -Passage: 300 x 55 mm -Dimensions: 2515 x 340 x 85 mm Nsdpfxjd Tlx Hj Ab Ajdc -Weight: 20 kg

Year of construction: 2012, condition: good (used), Power generator, emergency power generator, generator, power generator, power generator, emergency power generator, power generating unit -Manufacturer: SAB, Power generating unit type D-4107 F -Previous use: Ship -Power: 44/55 kW/kVA 50 Hz -Engine: Deutz type BF 4M 2012 60 kW -Generator: Marelli type MJB 200 MA 4 -Note: without control, without cooling -Individual components: see photos Njdsh I Ez Depfx Ab Asdc -Dimensions: 1630/710/H1060 mm -Total weight: 840 kg