Used Mecal Argus Sw 455 for sale (1,813)

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ Gsdpfx Aljfzccns Ioiu 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Giedpfxsfy Txyj Al Isu Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Year of construction: 2019, condition: ready for operation (used), A Flying Probe Tester Seica Pilot V8 Next Series with inline handling module on the left for vertical tilting of the PCB and inline handling module on the right for horizontal tilting and rotating of the PCB is available. Flying Probe Test System Seica Pilot V8 Next Series: PCB clamping system: manual, double-acting, manual active test area: 538x610mm, active test area: 518x610mm, PCB dimensions: 540x610mm, min. PCB size: 20x20mm, PCB thickness: 0.3 to 5mm, max. component height: 37mm, PCB loading: vertical, UUT edge clearance manual/automatic: 2/6mm, length: 1750mm, width: 1030mm, height: 1995mm, weight: 1.4t. Test tools/techniques: FNODE signature analysis on the nets of the unit under test, standard analog and digital in-circuit test, vectorless tests, JSCAN and OPENFIX to test ICs for opens and shorts, PWMON net analysis with power-on of the assembly, continuity tests to detect open connections on the assembly, visual tests for detecting component presence, component absence and rotation, high-resolution color camera, optional functional tests and boundary scan test capabilities, optional on-board programming tools for digital components, with complete documentation. An inspection on site is possible. Gijdpfx Aoy Sv S Hel Ieu

Condition: used, Year of construction: 2015, operating hours: 8,500 h, Liebherr R 924 SLC Year of manufacture: 2015 8,500 hours Gisdpsy Svlajfx Al Iou German machine, first owner Variable geometry boom Likufix quick coupler SW48 / fully hydraulic 1 bucket Hydraulic lines for hammer/grapple Please visit our website: ---- German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/?????/?????... Roman We will gladly take care of your financing or leasing. EU sales: net price upon presentation of company documents and VAT number. VAT deposit: 2,000 EUR Our services for you: - Customs license plates - Export documents and EUR1 certificate - Worldwide transport - Accommodation options - Transfer to Munich Airport or Passau train station

Condition: used, Year of construction: 2013, functionality: fully functional, One side scanner for sorting or optimization: Width: 30-200mm High: 13-50mm Length: 2-6m Possible to detect: Knots, wood structure, cracks, end cracks, color variations etc. Scanning speed: up to 200m/min Giedpfxjv Tlgds Al Isu Possible to scan different profiles

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, saw blade diameter: 550 mm, grinding wheel diameter: 150 mm, total width: 1,200 mm, total length: 1,200 mm, total height: 1,250 mm, type of input current: three-phase, input current: 4 A, input frequency: 50 Hz, grinding spindle motor power: 1,900 W, input voltage: 400 V, overall weight: 220 kg, spindle speed (min.): 3,700 rpm, Equipment: rotational speed infinitely variable, Loroch SW 550 machine in good working condition, ready for operation. The machine is suitable for professional workshop use. - saw blade dia. from 100 - 550mm - suitable for HSS saw blades for wood and metal cutting. - HSS saw blades geomeries - A, B, BW, C - Water cooling - additional device for shaping band saw blades Gedpfx Aoy Sgqtel Ioiu - Manual in Czech language (but it is simple machine)

Year of construction: 2023, condition: used, New: Yes Empty weight: 41 kg Dimensions of cargo space: 340 x 290 x 410 cm Serial number: P21410070W Production country: JP Please contact Team DPX for more information Gijdsxq Uprepfx Al Iou Rated current (A): 1000 Poles: 3

Condition: used, Year of construction: 1977, functionality: not functional, machine/vehicle number: 145240377, grinding length: 650 mm, grinding width: 350 mm, total height: 2,350 mm, total length: 2,800 mm, total width: 1,800 mm, table load: 300 kg, type of input current: three-phase, overall weight: 2,800 kg, input voltage: 380 V, space requirement height: 2,350 mm, Equipment: documentation/manual, We are offering this used ELB-Schliff Orion635 VA I-Z (SW 4/5) surface grinding machine, year of manufacture 1977. Operating voltage: 3×380 V Frequency: 50 Hz Direct current: 215 A Rated current: 15 A Fuse: 16 A Control voltage: 220 V Gsdpfx Aloy Nhxye Ieiu DC voltage: 110 V If you have any questions or need more information, feel free to send us a message or call us.

Condition: new, functionality: fully functional, Offering punched strip with fabric inlay for hydraulic punching machines and automatic punching presses, approximately 7–9 mm thick, in the well-known qualities BP-50, BP-55, and BP-455, cut to length and pre-prepared with step or wedge joint, including two-component adhesive. Giodpfxowduymo Al Ieu

Condition: used, Year of construction: 2015, operating hours: 12,990 h, * Hitachi ZX290LCN-5B * Year of manufacture: 2015 * 12,990 operating hours * 140 kW Isuzu engine * 30,000 kg * MS21 hydraulic quick coupler * All hydraulic lines * 3 m undercarriage width Godpjy Nkbdjfx Al Ieiu * Camera

Year of construction: 2003, condition: like new (used), Meypack Verpackungssystemtechnik GmbH Type: SW 90M/40-2 Double lane system Output (max): 40 cycles per minute Y.O.M.: 2003 Gisdpfofxyp Rox Al Iju Film cutting unit: Width is 900 mm Good running condition.

Condition: like new (used), HSS saw grinder LOROCH model SW Giedpfxoi El Hce Al Iou

Condition: used, functionality: fully functional, power: 140 kW (190.35 HP), fuel type: diesel, color: blue, operation weight: 30,000 kg, Year of construction: 2015, operating hours: 12,990 h, Equipment: quick-change device, rear view camera, Hitachi ZX290LCN-5B Year of manufacture: 2015 12,990 operating hours 140 kW Isuzu engine Gjdpfx Aley Ibyne Ieiu 30,000 kg MS21 hydraulic quick coupler All hydraulic lines 3 m undercarriage width Camera

Condition: used, Year of construction: 2019, operating hours: 1,815 h, Please contact Kristoff Van Havere for more information - Swivel Gjdpey E Ezqsfx Al Ijiu

Condition: excellent (used), Year of construction: 2018, operating hours: 40 h, machine/vehicle number: 16660, construction height: 1,330 mm, product width (max.): 1,035 mm, sweeping width: 975 mm, enginetype: Electric, manufacturer: Nilfisk Giodpfxoxtr Epo Al Iou

Condition: used, total height: 2,100 mm, total length: 1,850 mm, total width: 1,550 mm, Empty weight: 2.300 kg - Documentation available: Yes - CE certificate present: No - Serial number: 116710373 - Power [kW]: 2.5 - X-axis travel [mm]: 450 - Y-axis travel [mm]: 250 - Z-axis travel [mm]: 280 - Table width [mm]: 750 - Table depth [mm]: 250 - Magnet width [mm]: 450 - Magnet depth [mm]: 250 - Max. grinding wheel diameter [mm]: 240 - Max. spindle speed [rpm]: 2900 - Motor power: 2.5kW Giodpfx Alowya Nre Iou - Transport dimensions: 1850mm x 1550mm x 2100mm (l x w x h) - Transport weight [kg]: 2300kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1985, functionality: fully functional, The ELB SW 4/2 is a classic conventional surface grinding machine. Specific data may vary depending on the version (e.g., VA I, VAI-Z), but the key technical specifications typically fall within the following range: Gsdpfjyy Aczjx Al Ioiu Machine type: Surface grinding machine (horizontal) Working area Grinding length: approx. 450 mm Grinding width: approx. 250 mm Max. workpiece height: approx. 280 mm Grinding spindle Grinding wheel: Ø 250 mm × 25 mm width Bore: 51 mm Speed: approx. 1,430 / 2,900 rpm Spindle motor: approx. 2.5 kW (total power ~4.5 kW) Axis travels Vertical travel (Z): approx. 400 mm General data Total power: approx. 4.5 kW Machine weight: approx. 1,800 kg Dimensions (L×W×H): approx. 1,800 × 1,400 × 2,000 mm

Condition: ready for operation (used), functionality: fully functional, power: 107 kW (145.48 HP), empty load weight: 11,600 kg, Year of construction: 2010, Equipment: air conditioning, all wheel drive, cabin, Wheel Loader DOOSAN DL200 Year: 2010 Giedpfxoyyy H Rs Al Iju Approx. 14,000 operating hours 107 kW 11.6 tonnes - incl. bucket - hydraulic Volvo quick coupler - auxiliary hydraulic circuit up to the fork carrier - air conditioning - central lubrication - rearview camera - Good 20.5R25 tyres - Machine is immediately ready for operation! - Original paint! - Not cleaned and not repainted! - Direct from the construction site! Sale price: €22,900 net Available with new pallet forks for an extra charge! Also available with low-cost delivery!

Condition: used, Year of construction: 2007, We offer this used Wintersteiger 34 070 SW-550 H T machine, year of manufacture 2007. Type: 34 070 SW-550 H T Model: Micro Grinder H T Voltage: 400-415 V 3 AC Power: 1.1 kW Power: 1.47 HP Frequency: 50 Hz Giedpfjy Dip Nox Al Ieu Rated current: 3.3 A Weight: 220 kg Weight: 485 lbs Year of manufacture: 2007 If you have any questions or require further information, please send us a message or contact us by phone.

Condition: used, STAR SW 20 is a CNC automatic (Swiss-type) lathe offering high precision, strong accuracy and reliable performance. Capacities: 11 axes, 2 spindles, max machining Ø 20 mm, back spindle up to 10,000 t/min. Specs: spindle 3.7 kW, driven tools 1.2 kW (8,000 t/min), carriages with 7 and 5 positions, counter-operation 8 tools (6 driven), rapid traverse 35 m/min, 50 Hz 3x380 V, ~3400 kg, L2600×W1150×H1765 mm. Accessories: bar loader, lamp, 150 l coolant system, ELBARON oil-mist extractor, interface for bar loader. Achieves tight tolerances; typical uses: automotive, watchmaking, tooling, aerospace, medical. Gjdpfxjyxnwne Al Isiu

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Working efficiency - 2000 m2/h Brush motor - 550W Clean water tank - 60 l Machine weight - 180 kg Battery capacity - 24V/100Ah Godpfxoyx Dgfe Al Ioiu Cleaning width - 850 mm Vacuum motor - 500W Sewage tank - 55 l Machine dimensions - 140 x 85 x 105 cm

Condition: excellent (used), RMS Electrodynamic Vibration Test System Vibration Exciter SW 3006+ Power Amplifier TGA 1500 Technical Data: Godpjhyly Rjfx Al Isiu Sine: 3.7 kN Random: 3.7 kN Shock: 3.7 kN Stroke pk-pk: 26 mm Velocity: 0.9 m/s Acceleration: 80 g Cooling: air-cooled Condition: used Untested! Testing was not possible Scope of delivery: (see picture) (Changes and errors in the technical data may apply!) We are happy to answer further questions by phone.

Condition: used, functionality: fully functional, power: 54 kW (73.42 HP), fuel type: diesel, color: white, operation weight: 7,500 kg, Year of construction: 2014, operating hours: 6,000 h, Equipment: adjustable boom, gripper hydraulics, hammer hydraulics, hydraulics, Terex TC75 Mono/Circular compact excavator Year of manufacture: 2014 6,000 hours Giedpfxsyxbvdj Al Iou Adjustable boom, over-bending Zero tail swing 54 kW Deutz engine approx. 7,500 kg OQ 45 fully hydraulic quick coupler All hydraulic lines Steel tracks with rubber pads

Year of construction: 1972, condition: not inspected (used), machine/vehicle number: SW3a DP. U. AP. 40923 , sheet shear : A used sheet shear (swinging cut) from the manufacturer Wieger. At the foil or sheet shearing , the cutting gap does not need to be adjusted for cutting different sheet thicknesses. Max. Cutting Power = 10 mm Model or Type: SW3a DP. U. AP. 40923 (with lamellae working clutch with brake, electropneumatically actuated) Construction year: 1972 Condition: used (good) Giedpfx Ajd Eg Ngsl Ieu

Condition: good (used), Year of construction: 1984, machine/vehicle number: 332, Offer 24130 Technical data: - Drilling capacity into solid steel ST 60 32 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 27 - Drill spindle holder MK 4 Gedjtxzrwepfx Al Ijiu - Quill stroke 150 mm - 12 drill spindle speeds 102 - 2000 rpm - 3 drilling feeds 0.1 - 0.3 mm - min. / max. distance spindle - table 310 / 610 mm - Drilling radius min / max 380 / 1200 mm - Table height 720 mm - Table size 1200 x 500 mm - Drive 400 V / 2.0 / 2.4 kW - Space requirement approx. W 1200 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the rear side of the machine