Used Lvd Mvsb 40/16 for sale (31,730)

Condition: used, Payload: 0/16 Kg Arm reach: 1.50 mmNumber of Axis: 6 Repeatability: 0.03 mm Robot weight: 0 Kg Mounting: Floor Gedpfxsihgpvs Ab Deit

Condition: used, mileage: 17,845 km, power: 177 kW (240.65 HP), first registration: 05/1993, fuel type: diesel, overall weight: 12,000 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, total width: 2,500 mm, total height: 3,090 mm, Equipment: ABS, all wheel drive, complete with load: hydraulic rescue kit shears/spreader, power generator 5kVA and much more Gjdpfx Absrciadj Djit +++ extremely clean vehicle with only 17,845 km on the clock +++ ready for immediate use Water tank 2360l, rear pump FP 16/8 All-wheel drive 4x4 with 2x differential locks in the middle and rear, ABS, special signaling system fresh inspection including greasing and new fuel filter as well as new air dryer cartridge completed +++ Subject to errors, changes and prior sale

Year of construction: 1995, condition: excellent (used), 3 units centrifugal pumps Sulzer MB 40-160/5 Flow rate: 32 m³/h Head: 147 m Max. temperature: 130°C Seal: Mechanical seal with barrier water Drive power: Siemens 22 kW Gsdpfx Aed Sybpob Dsit Speed: 2950 rpm ! Price per unit !

Condition: used, functionality: fully functional, machine/vehicle number: H2X386F11206, Year of construction: 2015, operating hours: 4,028 h, load capacity: 1,600 kg, lifting height: 4,900 mm, free lift: 1,800 mm, fuel type: electric, mast type: triplex, construction height: 2,160 mm, fork length: 1,600 mm, empty load weight: 3,379 kg, drive type: Elektro, Electric 4-wheel forklift truck Fahrgestellnummer: H2X386F11206 Mast type: Triplex Condition: Reconditioned without warranty Technical condition: good Godpfjuhxgzjx Ab Deit Description: Linde E 16 P No.: R0149 Year of construction: 2015 Operating hours: 4,028 The device is visually and technically in good condition. Charger on request Errors and prior sale reserved. If you have not found your truck, please contact us. We have a large selection of other devices on site. Sideshift, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, roof cover, half-cab,

Condition: used, Year of construction: 2001, gearing type: mechanical, first registration: 01/2001, color: grey, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden, Telligent gearshift, switch 16 Gearbox number: 71552010180429, Actros gearbox G 240-16/11.7-0.69 with Voith secondary retarder R 115, Telligent gearshift! Dismantling of Daimler-Benz Actros 1848 AK 4x4, chassis number: WDB9520731K577913! The pictures are only a template so that you can see which vehicle the gearbox comes from! ACCESSORIES INFORMATION WITHOUT GUARANTEE, changes, prior sale and errors reserved! Gsdpfxoi Rk R Ue Ab Djit - .

Year of construction: 1990, condition: excellent (used), Manufacturer: Arthur Klink Year of manufacture: 1990 Model: RISZ 16 x 1250 x 400 / HG Technical data: Vertical internal broaching machine in technically very good condition tractive force: 16.000kg clearing speed: up to 27,5 m/min infinitely variable return speed: up to 34 m/min infinitely variable maximum stroke: 1250mm Gsdpfx Abslpadyj Djit broaching units: 4 pieces accessories: - automatic tool changer - automatic part feeding (part specific) - hydraulic tool clamping device (part specific) Remark: High performance production broaching machine for high volume production with high cutting speed!

Condition: new, functionality: fully functional, power: 2,028 kW (2,757.31 HP), output voltage: 11,000 V, output frequency: 50 Hz, rotational speed (max.): 1,500 rpm, motor manufacturer: MTU, 7 pcs in stock =Scope of supply= Genset mtu 16V4000L64FNER, 11 kV for operation with Natural Gas. gas train of 116-250 mbar inlet pressure with 1m flexible rubber-metal connecting hose. set of sylomer stripes for genset foundation installation. set of flexible connection for engine coolant circuit with flange connection set of flexible connection for mixture coolant circuit with flange connection set of exhaust bellows with flange connection and companion flange set Maintenance-free starter batteries, mounted on base frame. MIP (MTU Interface Panel) incl. Black Start option and ECU Remote Control interface =Technical specifications= Time for delivery - in stock Engine type - mtu 16V4000L64FNER Electrical power - 2028 kW Engine speed - 1500 rpm Electrical efficiency - 43.9 % Total efficiency - 88.6 % Alternator type - Leroy Somer LSA 54.2 ZL14 Voltage - 11 kV Frequency - 50 HZ < 500mg NOx at 5% O2 =Other information= Gijdsy Hddtspfx Ab Dot Production country - Germany

Condition: good (used), mileage: 35,076 km, color: black, lifting height: 37,000 mm, Year of construction: 2016, operating hours: 3,725 h, Drivetrain Drive: Wheel Gsdpfx Asy Sguxjb Dsit Make of engine: MAN Weights Empty weight: 7.490 kg Functional Lifting capacity: 4.000 kg CE mark: yes Maintenance, history and condition Number of owners: 2 Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Maximum lifting capacity at end of jib: 250 kg Emission level: Stage VI / Tier VI Delivery terms: EXW Latest inspection: 2025-04-14 Production country: DE Additional information Please contact Michael Overmeer for more information = Additional options and accessories = - Hook blocks = Remarks = Böcker AK 37/4000 montiert auf einen MAN TGL 7.180 with passenger basket, construction year 2016 with only 35.076 km and 3.725 hours. This vehicle is in nice condition (has been well maintained over the years) and has among other things: a passenger basket, automatic leveling, hydraulically folding support legs, hydraulic jip. Changes and typographical errors reserved.

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, laser power: 4,000 W, X working area max.: 3050 mm Y working area max.: 1550 mm Control: Rexroth IndraMotion MTX Laser power: 4,000 watts Standard equipment: Machine - Sturdy, easily accessible C-frame - Coordinate guidance for high-precision machining - Linear tool changer with 21 tool stations and 4 clamps - Maintenance-free three-phase drive motors - Repositioning device with programmable hold-down - Foot switch for closing clamps - 2 good parts containers - Automatic shutoff Laser station - TruFlow laser - High-frequency excitation - Cooling unit - TASC 3 laser controller - Enclosed beam guidance - Beam tube ventilation with compressed air - Programmable cutting gas pressure - Laser cutting head with 170 mm focal length - Universal quick-change cutting head device UTI with bus connection - LensLine - FocusLine - ControlLine - NitroLine - SprintLine - ContourLine - FlyLine - PlasmaLine - High-speed cutting - Additional Xp and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500 x 500 mm - Liftable laser cutting support - Slag cone detection - Laser logbook function Punching station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down with adjustable force - Stroke counter for punches - Spray lubrication for punches - Punch slug extraction - Warp detection - Flap for punched parts 500 x 500 mm - Fill level monitoring in the punching console Control - Open control system based on Bosch Rexroth IntraMotion MTX - Operating panel with 15" TFT touchscreen - Program management and 80 GB storage capacity - Diagnostic function with laser logbook - Integrated technology data - Teleservice Data transfer Giodpfx Aboy Saqge Djt - Network connection RJ45 and USB interface Safety - CE marking - Multi-beam light barriers - Monitoring system for, among others, gas pressure, temperature, cooling water - Hydraulic quick shut-off - Protection against stray radiation - Compact extraction unit - TruFlow 4000 - Vibration-dampened installation - Thread forming function - MultiTool function - Chip conveyor with tilting container - Active die - Ejector for small parts - Brush tables with loading aid - Marking function - Repositioning cylinder - Warp detection

Condition: good (used), functionality: fully functional, Year of construction: 2019, controller model: Rexroth IndraMotion MTX, laser type: CO₂ laser, laser hours: 980 h, laser power: 4,000 W, punching force: 22 t, Equipment: CE marking, nozzle changer, safety light barrier, Machine - C-frame - Coordinate guide - Linear magazine with 25 stations for clamps and tools - 4 x hydraulic clamps - Drives with maintenance-free three-phase motors - Repositioning system with programmable hold-down - Flap for punched parts 500x500mm incl. sensor - Foot pedal for closing clamps - FocusLine - NitroLine - FastLine - FlyLine - Additional XP and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500x500mm incl. sensor - Liftable laser cutting support TRUMPF Laser - TruFlow 4000 laser incl. LensLine and optimized standby - High-frequency excitation - Fine filtration of compressed air for beam tube ventilation - Closed beam guidance Cutting Head - Lens cutting head with 170mm focal length - Universal quick-change device for cutting head - LensLine - ControlLine Punching Head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable hold-down position - Tool length compensation - Punch slug extraction - Calculation of fill level in the punching console - Stroke counter for punches - Spray lubrication for punches - Fill level monitoring for tool lubrication - Stripper position measuring system with sheet thickness measurement function Control System - TRUMPF control based on Rexroth IndraMotion - Touch panel with 19" TFT color display - Integrated technology data - Programmable cutting gas pressure - Remote Support interface - Automatic shut-off with wake-up function - Production planner Functions - PlasmaLine Data Transmission - USB interface - RJ-45 network interface - Wireless Operation Point Safety - CE marking - Two-beam safety light barrier - Monitoring system for gas pressure, temperature and cooling water - Emergency stop for drives - Warp detection - Protection against stray radiation Extended Standard Equipment: - Network installation via Remote Support - Chiller (water-air) - Compact extraction system Gjdpfxey Sappe Ab Deit - 1st locating pin (inside right) - 2 finished parts containers - Chip container - 40 used RTC cassettes + die plate Punch Quality Package - MultiShear - Deburring and rolling technology - Adaptive stroke calibration - StripLine Forming Package - Thread forming incl. thread former breakage control - Marking/fast beading - MultiBend - Height-adjustable clamps - Automatic nozzle changer - MultiTool - Engraving - Smart Punch Monitoring with sheet format detection - 4 individually openable clamps - Automatic clamp closing with mechanical sensor zero stop - Repositioning cylinder - Vibration-damped installation - Chip conveyor with tilting container - Foot pedal start incl. rear-view mirror - Brush tables with loading and unloading support - Ejector unit for small parts - CO2 extinguishing system for compact extractor - Connection piece for exhaust air duct of compact extractor MobileControl App SheetMaster (AK08) UF - Loading station with spreader magnet - Simultaneous loading and unloading during main time - Peeling system incl. positioning aid for oversize formats - Additional positioning aids for medium format - Additional positioning aids for large format - First add-on package with 9 suction cups (incl. vacuum ejector) - Unloading monitoring for laser parts - Loading of blanks GripMaster 4000 x 1500 mm SortMaster Pallet 4 pallets longitudinal ToolMaster Linear 54 stations with simultaneous tool setup during main time - Safety devices for warehouse connection incl. 2nd light barrier circuit - Warehouse interface

Condition: excellent (used), For sale: Becker VT 4.40 vacuum pump – a high-quality unit from the renowned German manufacturer Becker. This pump is ideal for industrial applications, CNC machinery, vacuum packaging, and automation systems. ⚙️ Technical data: Manufacturer: Becker Model: VT 4.40 Year of manufacture: 2009 Capacity: 40 / 48 m³/h Power: 1.25 / 1.50 kW Speed: 1420 / 1700 rpm Frequency: 50 / 60 Hz Max. vacuum: 150 mbar Country of origin: Germany 🛠️ Features: Dry-running (oil-free) vacuum pump Quiet and efficient operation Compact design Low operating costs Very popular industrial model 📦 Condition: ✔️ Used ✔️ Very good visual condition ✔️ Normal signs of use ✔️ Ready for operation 📌 Applications: Gjdpfxsyz Dy De Ab Deit CNC machinery Vacuum packaging Wood industry Automation Suction systems 📦 Included: Becker VT 4.40 pump As shown in the pictures Weight: 39kg 🚚 Shipping: Courier or pallet shipping available Personal collection also possible We assist with transport organization

Condition: ready for operation (used), Rexroth HCS01.1E-W0028-A-03-B-ET-EC-NN-L3-NN-FW IndraDrive Cs compact inverter MNR: R911335595 SN:7260409116208, used, in good condition, 100% functional, scope of delivery as per photos. Giedpfox Et Uxex Ab Det

Condition: excellent (used), CATALOG NUMBER 7541 Technical Specifications: - Maximum diameter of main saw blade (without scorer): 400mm - Maximum diameter of main saw blade (with scorer): 350mm - Blade bore diameter: 30mm - Maximum cutting height for 400mm blade: at 90 degrees – 120mm, at 45 degrees – 85mm - Maximum cutting height for 350mm blade: at 90 degrees – 95mm, at 45 degrees – 67mm - Main blade adjustable vertically and for angle - Blade guard - Equipped with side sliding table - Cutting length on sliding table: 1700mm - Cutting width on sliding table: 1400mm - Cutting width at fence: 1350mm - Main motor power: 6kW - Table dimensions: 1190x990mm - With table extension: 1880mm - With table enlargement: 1890mm - With scorer unit - Maximum scorer blade diameter: 120mm - Scorer spindle diameter: 20mm - Scorer motor power: 0.75kW - Three spindle speeds: 3500, 4500, 6000 rpm - Brake - Extraction port diameter: 80, 120mm - Machine dimensions (LxWxH): 3050x2200x1600mm - Weight: 800kg ADVANTAGES – Manufactured in Poland Godpfxjy R Dvde Ab Doit – DTR documentation included – Blade guard – Equipped with scorer unit – With table extension and enlargement – Used saw, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7620 TECHNICAL DATA - shaft width: 410 mm - table length: 2220 mm - cast iron tables - both tables adjustable - original cast iron fence - motor approx. 3kW - dimensions (L/W/H): 2220x800x1140 mm - weight: 504 kg Gisdpfx Abey R Az Ss Dst ADVANTAGES – German-made – used jointer – in very good condition Net price: 6900 PLN Net price: 1640 EUR based on 4.2 EUR rate (Prices may vary with significant exchange rate fluctuations)

Condition: good (used), Manufacturer: LVD STRIPPIT Type: Global 20 FANUC Control: FANUC 180i-P Year of manufacture: 2006 Thick turret WILSON tool system Under power inspection possible Large package tooling WILSON Auto indexing rotation tools included Laser safety guids included Specifications Metric US standard Table load 150 Working area X axis 2500 mm Working area Y axis 1250 mm Working area X axis with takeover 5000 mm Punching force 20 T Max. sheet thickness 6 mm Turret positions 30 Auto index. positions Gedov Ic Tqjpfx Ab Dsit 4 Positioning speed X and Y axis 4500 mm/min. Turret change speed 900 rpm Dimensions (estimate) Length 6400 mm Width 5600 mm Height 2445 mm Weight 16500 kg Please note: The information on this page is correct to the best of our knowledge and belief and, where possible, has been obtained from the manufacturer. The information is given in good faith but its accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 17,577 h, clamping force: 1,600 kN, total height: 2,060 mm, This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. It's an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information. Additional equipment • Sepro Robot SDR 11 Machine Benefits Technical Machine Benefits • Clamping unit: 160 / locking force: 1760 kn / opening stroke max: 495 mm / mould installation height, min: 275 mm / mould installation height, max: 585 mm • Platen distance, max: 1080 mm / mould mounting platens (h x v): 760 x 785 mm / clear column distance (h x v): 520 x 520 mm • Ejector travel: 125 mm / ejector force: 35 kn • Injection unit: 340 / screw diameter: 35 mm / l/d ratio: 20 / injection flow (ps) without accumulator: 288 cm³/s • Metering stroke: 162 mm / nozzle stroke, max: 350 mm / nozzle immersion depth (svo): 20 mm / nozzle contact pressure: 30 kn • Material hopper capacity: 35 l / injection speed, max. , standard: 300 mm/s / injection speed, max. , increased: 500 mm/s Godjx D Hnmopfx Ab Djit • Net weight without oil filling: 7300 kg Extra Information Electrical & Pneumatic Interfaces: Sockets: 2 x Schuko (1Ph, 230V, 10A)/ 2 x IECEE (3Ph, 400V, 16A) – switched off via main switch/ Additional Schuko socket also listed (same rating)/ Valves: 1 x Pneumatic 5/2 valve on movable platen (programmable)/ 2 x Pneumatic 5/2 valves on stationary platen (programmable)/ I/O: 3 digital inputs / 3 digital outputs (freely programmable)/ Terminal board outside control cabinet/ Air & Cooling: Central air supply and piping/ Cooling system: open cycle/ Cooling water controller: 4 circuits with temperature indication (max. 10 l/min per circuit)/ Separate water connection for cooling (mould + machine)/ Switch-off for mould cooling (time programmable)/ Machine Mechanical & Motion Features: Clamp and injection unit colours: Jet black (RAL9005): bed, pump station, lower control cabinet/ Signal white (RAL9003): clamp unit, injection unit, guards, covers, safety doors/ Mould platen layout: E-standard (similar to EUROMAP, March 1996)/ No side ejector platen/ Ejector: held in front position against spring-loaded mold ejector/ Standard mold height/ Standard closing speed/ Only active movement when safety guard is closed/ Screw: wear-resistant, nitrided barrel, standard L:D, 35 mm diameter/ Non-return valve: 3-piece ring type/ Control, Programming & Monitoring: Inputs/outputs and clamp sequence: freely programmable/ Switching programs (e.g., dry cycle, startup scrap counter, timer-controlled cooling)/ Injection process: Injection force with max injection speed: 200 mm/s/ Back pressure programmable via 6-point polygon/ Follow-up pressure switch-over based on melt pressure/ Follow-up, back pressure, metering: closed-loop control/ Feed throat temp control: closed-loop, max 90°C ±9°C/ Reduced nozzle sealing force (programmable)/ Clamp force: closed-loop control/ Active mold protection: sensor-based during closing/ Hot runner control: 5 zones integrated (2.75 kW total) Display, Software & Data: Coloured data display PDA (Process Data Acquisition): 100% control with graphical parameter recording/ Overlaid graphs for multiple cycles/ External statistical data export/

Condition: ready for operation (used), Fanuc A16B-2204-0060/03A card, used, very good condition, 100% functional Gisdei D U D Hjpfx Ab Dst

Condition: ready for operation (used), REFU 317/03-AB01 frequency converter SN: 6000-1697-0006 - 3AC 0-4000V / 50/60Hz, used, good condition, 100% functional, scope of delivery as per photos Gijdpfxstvcucs Ab Dot

Condition: new, Year of construction: 2023, ! Offers for customers from Baltic states only: Lithuania, Latvia, Estonia. A robust servo-controlled hydraulic system offers precision and high reliability for consistently accurate bending results. Programming of parts is quick and easy with intuitive touch screen control. There are 4, 5 or 7 axis press brakes available. Working length varies from 2000 up to 4000 mm, and the pressing force from 500 up to 3200 kN. Available tooling styles for PPED press brake: LVD style, W style or Univeral. Pressing force: from 500 kN up to 3200 kN Working length: from 2000 mm up to 4000 kN Gjdpfsixz H Eox Ab Djit

Condition: new, Year of construction: 2026, CORMAK CNC BASE 40x1600 Hydraulic CNC Press Brake The CORMAK EUROBEND series press brakes are advanced machines designed for sheet metal forming and bending. During the ram cycle, the machine adapts to the required geometric profile, ensuring precise and repeatable bending results. These machines are widely used across many industries, including electromechanical manufacturing, light industry, agriculture, shipbuilding, automotive, and aerospace sectors. Thanks to properly selected punches and dies combined with modern CORMAK CR-41 controllers, these machines enable the execution of even the most demanding bending operations. Main Features Safe bending speed up to 10 mm/s 2 front support arms ensuring stability during bending operations Automatic back gauge adjustment (X-axis) Automatic beam adjustment (Y-axis) Manual finger height adjustment (R-axis) AMADA-type quick punch clamping system for fast tool changes Segmented punches Four-sided die allowing bending of various sheet thicknesses Giedpey Sgqyefx Ab Det Bosch Rexroth hydraulic system High-quality electric motor Technical Specifications Parameter Value Maximum Sheet Thickness (S235 steel) up to 3.0 mm Nominal Press Force 400 kN Maximum Bending Length 1600 mm Throat Depth 200 mm Maximum Ram Stroke 100 mm Maximum Opening Height 300 mm Distance Between Side Frames 1200 mm Back Gauge Travel 600 mm Motor Power 4.0 kW Length 1800 mm Width 1200 mm Height 1850 mm Weight 2750 kg Precision and Industrial Efficiency The CORMAK CNC BASE 40x1600 press brake is designed for precise, repeatable, and efficient sheet metal bending. Automated X and Y axis control improves accuracy and reduces setup time, making the machine suitable for both small-batch production and industrial-scale operations. The segmented punch system and four-sided die provide flexibility in processing different geometries and material thicknesses while minimizing tooling changeover time. Hydraulic System and Control The machine is equipped with a reliable Bosch Rexroth hydraulic system, ensuring smooth operation, durability, and precise pressure control. Combined with the CORMAK CR-41 controller, the press brake offers intuitive operation and high bending accuracy even for complex components. Applications The CORMAK CNC BASE 40x1600 is ideal for: sheet metal fabrication workshops industrial manufacturing facilities automotive component production agricultural machinery manufacturing shipbuilding industry aerospace applications custom metalworking projects

Condition: excellent (used), CATALOG NUMBER 7587 Technical data: - Shaft width: 410 mm - Number of knives: 3 pcs - Brake - Table length: 2540 mm - Cast iron tables - Both tables adjustable - Original cast iron fence, angle-adjustable - Motor: 3 kW - Dimensions (L/W/H): 2540x1000x1050 mm - Weight: 730 kg Advantages: Giodpfxsy N Rfie Ab Det – Made in Poland – 3-knife shaft – Used jointer – Very good condition Net price: 7,900 PLN Net price: 1,880 EUR Net price calculated according to exchange rate 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: new, Year of construction: 2026, machine/vehicle number: 2642039, fuel type: diesel, motor manufacturer: Volvo TWD1683GE-SV, General information Field of application: Construction Weights Empty weight: 7.000 kg Functional Generator capacity: 740 kVA Dimensions of cargo space: 486 x 206 x 264 cm CE mark: yes Other information Fuel consumption: 100 Liter per hour at 75% Load Generator: Stamford HCI544F1 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 985 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy Gedjxwhuzjpfx Ab Dsit - Tank

Condition: new, Year of construction: 2024, machine/vehicle number: 2337387, fuel type: diesel, motor manufacturer: Volvo TWD1683GE-SV, General information Field of application: Construction Weights Empty weight: 5.300 kg Functional Generator capacity: 740 kVA Dimensions of cargo space: 447 x 155 x 256 cm CE mark: yes Other information Fuel consumption: 100 Liter / Hour at 75% Load Generator: Stamford HCI544F1 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Emission level: Stage V / Tier IV final Water tank volume: 985 l Additional information Please contact Team DPX for more information Gijdpfxox Nl Eqj Ab Det = Additional options and accessories = - Battery - Control Panel - Tank

Condition: new, Year of construction: 2025, machine/vehicle number: DGBR1013S40457K, fuel type: diesel, motor manufacturer: Perkins 4016-TAG2A, General information Field of application: Construction Weights Empty weight: 22.100 kg Functional Generator capacity: 2.200 kVA Dimensions of cargo space: 1219 x 234 x 290 cm CE mark: yes Other information Fuel consumption: 326 Liter / Hour at 75% Load Generator: Leroy Somer LSA52.3S Frequency: 50 Voltage: 400 Giodpfx Aor Idbrob Det Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 2000 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Perkins 2206A-E13TAG2, General information Field of application: Construction Weights Empty weight: 4.575 kg Functional Generator capacity: 400 kVA Dimensions of cargo space: 493 x 166 x 215 cm CE mark: yes Other information Giodpfoyz Sk Rox Ab Det Fuel consumption: 52.6 Liter / Hour at 75% Load Prime Generator: FG Wilson FG29A280 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 888 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank