Used Krämer+Grebe Ww 200 for sale (16,683)

Year of construction: 2001, condition: excellent (used), Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under power and is in very good condition. Knedpfx Aehtaaqjnuec Pressing capacity in t: 200 Quantity of oil in l: 1100 Stroke in mm: 300 Table size (lxb) in mm: 600 x 600 Daylight in mm: 1000 Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Total weight in kg: 12000 Operating pressure in bar: 6 Approach speed in mm/sec: 375 Working speed in mm/sec.: 18 - 40

Condition: new, clamping range of chuck 10 - 200 mm height 67,5 mm daylight 65 mm external diameter Futter 200 mm external diameter Spannhebel 360 mm weight 4 kg Characteristics: • Self-centering. Kedofv Awljpfx Anujnc • Reversible jaws. • Fixed clamping levers allow fast workpiece changes. • Low weight and flat design minimize the center of gravity. The D-D quick chuck enables a quick product change and is suitable excellent with frequent component changes. You do not need a loose one Quick release wrench, as the levers are integrated into the quick release chuck.

Condition: good (used), Engine freshly overhauled (over 12tys zl). 100% operational Knjdpfx Ajtt T Nfenusc I invite you to contact me

Condition: used, Two Forkardt faceplates Diameter 200mm 2 BHE 200 Short taper diameter 106.4 mm = Size 6 Bolt circle diameter 133 mm Kodpfxecurfye Anuenc

Condition: used, Faceplate chuck Knedpfx Aocu Ngkenuoc Manufacturer: WMW Clamping range: 30 - 200 mm Maximum clamping force: 3500 kN Short taper size: 5

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22001007597, empty load weight: 6,200 kg, maximum load weight: 11,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2018, loading space height: 200 mm, total length: 11,600 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", color: red, Equipment: center pivot plate, Archive images! Chassis: Steel welded construction, double-curved with low-bed at the front and rear of the axle assembly, low-bed inclined for easy access, turntable with robust ball bearing race, foldable rear support, shims, side impact protection, quarter-panel fenders Lashing points: above the front axle: 2 pairs of ring lashing points, each 5 tons, at the front on the low-bed / rear axle: 6 pairs of lashing points on the side in the low-bed, each 8 tons. 6 pairs of lashing points, each 5 tons, between the longitudinal beams, a pair of stake pockets embedded in the outer frame, inner dimensions 70 x 40 mm, or instead of stake pockets, 5-ton ring lashing points embedded in the floor. Drawbar: tested 40 mm drawbar eye Axles: BPW drum brake axles Braking system: 2-line pneumatic braking system, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front Electrical system: 24 volts, multi-chamber lights, yellow side lights, 2 white position lights at the front 2 white/red marker lights at the rear, rotating beacon with bracket, pair of illuminated and extendable warning signs up to 3,000 mm, 2 x 7-pole non-interchangeable plugs at the front Floor: front curve with steel/diamond plate surface, storage compartment embedded in the ramp incline, driving area and in the middle between the beams with steel/diamond plate surface, rear incline with 70 mm softwood floor, low-bed platform including rear incline 5900 mm Kjdji Ri N Uepfx Anuenc Ramps: attachment rail for aluminum ramps over the entire width, as a U-profile over the entire width Pair of aluminum ramps 800 mm long, approx. 400 mm wide, load capacity per pair 14,000 kg, Storage compartment for ramps between the beams Approval: contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear.

Condition: used, Year of construction: 2010, turning length: 1,495 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, workpiece weight (max.): 300 kg, total height: 2,577 mm, total length: 5,088 mm, total width: 2,450 mm, spindle nose: A2-6, spindle diameter: 660 mm, Equipment: documentation/manual, CNC Control Mazatrol Matrix Turning diameter 660 / 260 mm Kodjzqt Umopfx Anuenc Turning length 1495 mm Spindle bore diameter 65 mm Spindle nose A2-6 Spindle nose sub spindle A2-6 Turning speed spindle 35 - 5.000 R/min Turning speed sub spindle 35 - 5.500 R/min Milling head speed 15 - 12.000 R/min Movement X-axis 580 mm Movement Y-axis 160 mm Movement Z-axis 1.545 mm B-axis travel 225° C-axis indexing 0,0001 (360) ° Tool taper Capto C6 Tools in tool magazine 120 Barfeeder Irco-Breuning ILS-MUK If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,425 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 201 mm, total length: 220 mm, total width: 202 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, table width: 450 mm, table length: 680 mm, empty load weight: 2,450 kg, Machine completely cleaned and overhauled. 0.1 mm option available. Kjdpfxey Tvtms Anujnc Available for viewing at our facilities in Semsales, Switzerland.

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 4,500 rpm, travel distance X-axis: 215 mm, travel distance Z-axis: 440 mm, controller manufacturer: FANUC, controller model: 21i-T, number of slots in tool magazine: 12, number of axes: 3, This 3-axis Cincinnati HAWK 200 was manufactured in 2004. It features a turning length of 500 mm and a maximum turning diameter of 250 mm. The machine is equipped with a FANUC 21i-T CNC control and has a turret capacity of 12 tools. If you are looking to get high-quality turning capabilities, consider the Cincinnati HAWK 200 CNC lathe we have for sale. Contact us for further details. • Turning length: 500 mm • Maximum turning diameter: 250 mm • Swing over bed: 400 mm • Swing over cross slide: 380 mm • Spindle bore: 63 mm • Driven tools: Yes, 6 driven tools Technical Specification Knsdez N A U Sopfx Anusc Counter Spindle Yes Driven Tools Yes

Condition: used, functionality: fully functional, The LASKA WW 130-2 is an industrial meat grinder from the LASKA brand.. With a 130 mm throat diameter and 15 kW of power, the machine is designed for efficient raw material grinding in medium and large meat and food processing plants. How does the LASKA WW 130-2 meat grinder work? Raw material is loaded into the hopper, from where a screw feeds it to the cutting set consisting of a knife and perforated plates. The rotating knife cuts successive layers of material forced through the plate holes, producing uniform grinding at the required coarseness. The degree of grinding depends on the perforated plate used, and the cutting set can be quickly disassembled for cleaning and replacement of parts. Key advantages of the LASKA WW 130-2 meat grinder The large 130 mm throat diameter and 15 kW drive power allow continuous, efficient work with large batches of raw material, which suits high-volume plants. Solid industrial construction ensures a long service life, and the simple working system makes operation, cleaning, and maintenance easier. The IP 55 protection class stated on the nameplate means the electrical system is protected against dust and water jets, which is important in environments where equipment is regularly washed down. Technical specifications of the LASKA WW 130-2 meat grinder Manufacturer: LASKA Type: WW 130-2 Factory number: L 6850 Year of manufacture: 1999 Throat diameter: 130 mm Power supply: 3 x 400 V, 50 Hz Rated power: 15 kW Rated current: 28 A Protection class: IP 55 Capacity: up to approx. 5,000 kg/h Hopper capacity: approx. 175 l Compliance: CE Ksdpez N Ax Rjfx Anujnc Application of the LASKA WW 130-2 meat grinder The LASKA WW 130-2 meat grinder is used in meat processing plants for grinding meat in the production of cold cuts, sausages, minced meat, and fillings. The machine also performs well in other food processing plants, wherever efficient grinding of large quantities of raw material is required.

Condition: used, maximum load weight: 30,210 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2013, loading space length: 13,430 mm, loading space width: 2,470 mm, loading space height: 2,650 mm, loading space volume: 88 m³, total width: 2,600 mm, total height: 4,000 mm, Year of construction: 2013, Equipment: ABS, 3-Axle Lamberet SR2B Reefer Trailer VIN: FC1R24111 Chassis / Components: * Jost landing gear * Air suspension / Raise and Lower * Lift axle * 3 x BPW Eco Plus axles with disc brakes * Tires: 385/65 R22.5 * Remaining tread depth: Front ~80%, Middle ~90/80%, Rear ~60% * Jost landing gear * Pallet box * 1 x Fire extinguisher holder * Spare tire holder for 2 tires * Aluminum diesel tank Body: * Reefer refrigerated box * L x W x H: 13.43 m x 2.47 m x 2.65 m * Cargo space: approx. 88 m³ * Interior lighting * 2 x rails per side for cargo securing * Floor: Plastic * Refrigeration unit: Thermo King SLX 200 * Diesel hours: 17,362 hours * Mains operation: 935 hours * Mains operation // Electric * Temperature recorder Euro Scan * Printer Weights: * Gross vehicle weight: 39,000 kg * Tare weight: 8,790 kg * Payload: 30,210 kg Knsdpfxjz I Hc Aj Anusc Other: * German vehicle * TÜV (technical inspection) valid until 11/2026 ---- New main inspections / safety checks or weight adjustments are possible upon request. We will gladly assist you in obtaining export / transfer license plates. We can also arrange for the transport of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English and Russian! ---- No liability for printing and typographical errors, changes, prior sale and errors. Subject to change! ---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the refurbishment and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A large variety of vehicles can be found on our 11,000 m² site. Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly help you with loading your purchased vehicles. Organization of special transports We will gladly help you with organizing special transports. Day permits / export license plates We will gladly help you in obtaining export license plates / short-term license plates. Handling of customs formalities We will gladly help you with handling customs matters.

Condition: used, 1 unit double grinding stand AEG DWS 200/800M with wall mount, self-disassembly Color: as shown in the pictures, according to the images and inspection Condition: used Knedpfx Aez I Nrgsnusc Location of the goods: workshop Payment method: prepayment by bank transfer Shipping: self-collection only from the Bischofswiesen location

Condition: used, Cast iron bed Length: 2300 mm Width: 1900 mm Thickness: 200 mm Height on feet: 980 mm 5 T-slots horizontal and vertical T-slots dimensions: 60 x 35 mm Square dimensions: 365 x 365 mm Kjdpfx Aez H Ixcenusnc Crack at a longitudinal T (see photo) Weight: approx 3 T

Condition: used, Year of construction: 1985, cutting diameter 200 mm band length . mm stroke . mm total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Knsdpfxjz Icx Hj Anuec We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Catalog number 7805 TECHNICAL DATA - track width 340mm - shaft width 340mm - disc bore diameter 80mm - discs mounted on the upper shaft 350mm - discs mounted on the lower shaft 300mm - max cutting height 200mm - min workpiece length 700mm – top - 2 rows of pressure rollers - smooth, sliding, pressure shaft - pressure rollers - 2 sliding, smooth, pressure shafts - shaft with saws - 3 smooth pressure rollers – bottom - track - shaft with saws - track - stepless feed speed adjustment - main motors 2 x approx. 55kW - feed motor 3kW - electric body lifting (up/down) - manual adjustment of saw shafts - central lubrication - dust extraction nozzle diameter 2 x 200mm - dimensions L/W/H 2700x1800x2150mm - weight approx. 5000kg ADVANTAGES - made in Germany - two-shaft - 2 x 55kW motor - multi-blade saw, used, very good condition Net price: 178900 PLN Net price: 41605 EUR, depending on the exchange rate of 4.3 EUR (Prices may vary due to higher fluctuations) Ksdpfezxqq Iex Anuonc

Condition: used, mileage: 4,710 km, power: 55 kW (74.78 HP), first registration: 07/2025, fuel type: diesel, color: white, next inspection (TÜV): 07/2026, driver cabin: other, gearing type: other, Year of construction: 2025, operating hours: 165 h, total length: 5,090 mm, total width: 1,420 mm, total height: 2,340 mm, maximum speed: 50 km/h, * 224901 Swingo 200+ 2 Brush System * 225101 Euromot 5 Engine 55 kW (75 hp) * 225201 500-hour Long Life Oil * 225404 50 km/h * 225300 Hydro-pneumatic Suspension * 231701 Noise Reduction for Cabin & Container * 187001 Steering Wheel Knob * 226502 Radio DAB+ * 226601 Rear View Camera * 226701 Suction Nozzle Camera * 226801 Reverse Warning System, Switchable * 226901 12 Volt Socket * 235001 Standard Monitor * 226301 3-Point Safety Belt for Driver * 226401 2-Point Belt (Lap Belt) for Passenger * 230501 Rotating Beacon, Foldable * 228503 Sweeper Brush, Mixed (Poly/Steel) * 228801 Rollers for Suction Nozzle instead of Skids * 227301 Independent Brush Control * 227401 C-Shaped Brush Arms * 228701 17 mm Rubber Suction Nozzle * 228901 Stainless Steel Container Pipe * 229201 Hand Suction Hose Preparation * 190701 Standard Paint, RAL 9016 White * 1317SWINGO Operating Manual * 232601 Wheel Chock with Holder * 100901SWIN Modem Kit IntelliOPS Kodpfsz Sc T Ujx Anusnc Other: * Trade-in and purchase of vehicles and machines possible. * Sale price excludes transport and delivery. * No liability for printing and typographical errors. * Subject to errors, changes, and prior sale. * Offer subject to change. * Photos may vary. Price applies to the current condition. * All information without guarantee.

Condition: good (used), Year of construction: 1997, Used Beyeler press brake Type PR10 200 4100 Capacity 4100 x 200 tons Cybelec CNC control Y1, Y2, X, R, Z1, and Z2 axes CNC-controlled Kedpfjz H Udlsx Anujnc Wila upper and lower clamping system Tools not included

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS21, Exhibition unit ATLANTA NEOS stretch wrapper with articulated arm 99 individually storable programs Start/stop at the same position (corner counter) Wrapping height 2000 mm Mast height approx. 1500 mm (fits through almost any door and in almost any van) Powerstretch PRS 200% film (more available as an option) Motorized pre-stretch system with stepless adjustment Electronically controlled film tension via control unit IEF quick-loading system for easy film roll changes Film specifications: Max. outer diameter Ø300 mm – height = 500 mm – core Ø76 mm Automatic film cutting unit (available as an option) Film tension storable in 4 steps TECHNICAL DETAILS: Two maintenance-free 12 V – 100 Ah AGM batteries connected in series Minimum 160 pallets per Charging – Charging time: 8-10 hours High-frequency battery charger with LED display Wrapping height “Machine with MAST (pallet included) 2,150 mm Height measurement via light sensor or dimension input on the display Protective bar for emergency stop of the drive Emergency stop switch compliant with CE regulations Acoustic warning signal and warning light at machine start Fall protection for the film carriage Push buttons for start & stop Machine function compliant with CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters adjustable via display - Display lock for program changes - Adjustable machine speed around the pallet up to 80 m/min Upward and downward carriage speeds independently adjustable - Upward carriage speed from 1.3 to 5.4 m/min - Downward carriage speed from 1.3 to 5.4 m/min - Number of wraps at the pallet base (1-10 wraps) - Number of wraps at the pallet head (1-10 wraps) - Pallet wrapping height adjustment - Film application tension for foot and head wrapping / ascending and descending, independently adjustable - Film pre-stretch for foot and head wrapping / ascending and descending, independently adjustable - Ergonomic height for film changes Knsdpjz Iq Trsfx Anuoc ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable wrapping programs for the NEOS arm - Cross wrapping (upward/downward) - Simple wrapping (upward only or downward only) - Wrapping cycle with preset start and stop height - Wrapping to a preset height (with the height sensor deactivated) - Wrapping cycle for large pallets - Wrapping cycle for top sheet film - Soft start cycle for applying edge protection - Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp edges Pallet edge wrapping Wrapping cycle with manual or motorized cord formation (optional) Further systems available immediately from our Ludwigsburg warehouse Also available with the ARYA system – automatic film application possible

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS02, LYBRA Easy OPRS / 6 Programs The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS Knedpfx Anoz Irx Neujc – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS03, LYBRA Easy OPRS / 6 Programs With automatic cord formation to reinforce the winding in various steps on the pallet. The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) Kedpez Ir Hajfx Anuonc ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, overall weight: 34 kg, input frequency: 50 Hz, input current: 2 A, input voltage: 230 V, RETSCH AS 200 control – Vibrating sieve machine with analytical sieves 25–200 µm For sale is a RETSCH AS 200 control for particle size analysis and fractionation of powders and bulk solids. The system is suitable for applications in laboratories, research, and quality assurance, for example, for the analysis of metal and ceramic powders. The machine is in very good condition with normal signs of wear and tear. The total new price, including the listed accessories, was €6,180 in January 2024. The electromagnetic drive generates a three-dimensional sieving motion. The vibration amplitude, sieving duration, and interval operation can be digitally adjusted. The controlled amplitude enables reproducible sieving results; up to 99 parameter combinations can be saved. Technical specifications according to the manufacturer: - Measurement range: 20 µm to 25 mm, depending on the material and sieve set - Maximum sample quantity: 3 kg - Vibration amplitude: 0.20–3.00 mm, digitally adjustable and controlled - Sieving duration: 1–99 minutes Kedpfxez Ixfvj Anuenc - Suitable for dry and wet sieving, with corresponding accessories - Dimensions of base unit (W × H × D): 417 × 212 × 384 mm - Weight of base unit: approx. 35 kg Available accessories: Ten used analytical sieves according to DIN ISO, each with a diameter of 200 mm and a frame height of 25 mm. One sieve each with the following mesh sizes: 25 / 32 / 38 / 45 / 53 / 63 / 75 / 100 / 150 / 200 µm A collection tray with a diameter of 200 mm and a height of 50 mm is also included. Shipping is possible; shipping costs will be charged separately. If you are interested, please contact me.

Condition: used, Year of construction: 2014, Suitable for automatic grinding of the tooth face and tooth back of carbide-tipped circular saw blades. Technical Data: Knsdpfez Nw H Aex Anuec Circular saw blade diameter 80 - 650 mm, circular saw blade bore diameter from 10 mm, blade thickness up to 5 mm, tooth pitch 6 - 100 mm, rake angle -10° to +30°, clearance angle 5° to 25°, tooth height difference arbitrary, bevel grinding on the tooth back up to 45°, bevel grinding on the tooth face up to 15°, grinding wheel diameter 125 mm, grinding wheel bore diameter 32 mm, connected load 400 V / 50 Hz, weight approx. 850 kg, dimensions W x D x H = 1502 x 960 x 1900 mm, colour grey RAL 7045 / grey RAL 7047. Suitable for automatic grinding of the tooth face and tooth back of carbide-tipped circular saw blades.

Condition: new, new ! all stainless steel speed : 27 rpm 2 mixing directions safety lid CE-approved power : 2,2 kW overall dimensions (l x w x h) : ± 1.400 x 1.000 x 1.600 mm The Barmix 200 liter paddle mixer is an ideal machine for mixing all types of food products within the meat, poultry, fish, vegetables, dairy, cereal, confectionery, petfood and sandwich filling industry. Ksdpfez Nxg Rjx Anusnc Mixing for meat and vegetarian burgers, sausages, meatballs, coleslaw, potato salad and other wet salads, mash potato, vegetables fresh and frozen, cereals, raw petfood Also suitable for dry products, such as herbs, ingredients, powders, granules, nuts, grains, seeds, kernels, dried fruit, Granola, etc.

Condition: excellent (used), CATALOGUE NUMBER 6650 TECHNICAL DATA - max cutting height 200mm - track width 450mm - shaft width 450mm Kodpezxqvdsfx Anuenc - blade arbor diameter 80mm - shaft diameter 60mm - min blade diameter 250mm - max blade diameter 350mm - max blank width 870mm - min blank length 1500mm from above: - pawls - driving shaft, toothed, metal - pawls - driving shaft, toothed, metal - pressure roller - shaft with blades - 2 driving shafts, metal, pneumatically pressed from below: - guide - metal sliding roller - pawls - track - shaft with blades - track - stepless feed speed adjustment via frequency inverter 4-40m/min - main motors 2x75kW - feed motor 3kW - electric lifting of the machine body up/down 0.55kW - electric adjustment of the blade shafts 2×0.25kW - central lubrication - diameter of the extraction nozzle 2x300mm - dimensions L/W/H 3100x2600x2000mm - weight approximately 6500kg - Centering device included - toothed driving rollers 3 pcs - smooth driving rollers 8 pcs - motor 2×1.5kW - pneumatic pressure roller (from above) - side pressure roller - dimensions L/W/H 4850/1100/1800mm - weight approximately 1000kg ADVANTAGES - made in the Czech Republic - twin-shaft - centering device - DTR documentation - year of manufacture 2010 - multi-blade saw, used, very good condition Net price: 262900 PLN Net price: 61140 EUR Net price calculated according to the exchange rate of 4.3 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 3 h, For inquiries: Zoltán Utasi +36 30 205 7380 Year of construction: 2021 Condition: as good as new (approx. 3 operating hours) Technical specifications Roller carriage length 3200mm Cutting length 3400mm Cutting height max. 155mm at 90°, 105mm at 46° Cutting width width stop 1250mm Saw blade max. Ø 450mm Table size cast iron table top 1200 x 655mm Additional table extension 750 x 655mm Table extension 1430 x 940mm Table height +/-20?mm 900mm Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Net weight approx. 1150kg Technical description For trimming, cutting to length, formatting, mitre cutting etc. The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of grey cast iron with double column guide for height adjustment and the long circular saw shaft with 2 ball bearings ensure absolutely smooth running. The double roller carriage with ball bearings is smooth-running and maintenance-free. Precise and backlash-free running over the full length, guided by hardened and ground round steel guides with remote locking in a 50 mm grid. Sturdy yet lightweight cross slide made of steel profiles with a support roller on the outer narrow side, cross slide widening on the wide side Length stop on the cross slide with mm scale and telescopic extension extendable up to 3500 mm; with 2 robust and backlash-free sliding stop flaps, 1 end stop with support for long strips; length stop can be used as an angle mitre fence on both sides, infinitely variable from 0° to 46° with mechanical length compensation; all common mitre angles (15°, 22.5°, 30°, 45°) can be quickly set using a fixing system. Electromotive width stop with cutting width 1250 mm to the right of the saw blade, dimension input on the control panel at the top via positioning control to 0.1 mm, stop can be folded down for free table surface; Safety cut-off bar between width stop and roller carriage in case of crushing hazard With pull-out tool drawer Top operation with control panel positioned at eye level, swivelling, incl. Including template holder and with 7" touchscreen control for cutting height, swivelling adjustment and speed Electromotive height and swivelling adjustment via positioning control Swivelling range of the saw blade from 0° - 46° Digital displays for degree setting, cutting height, speed and cutting width APA saw blade quick-clamping system Safety guard can be swivelled to both sides, Protective cover with interchangeable wide/narrow insert Push-button control with electronic soft start (start/stop) Electronic, wear-free motor brake Knodpfx Asq H Sqdenuoc Saw blade Ø 400mm can be lowered under the table Extraction nozzle Ø 120mm on the machine body, Ø 80mm on protective hood CE conformity GS tested Length stop analogue Cross slide standard Cutting length 3400 mm Three-phase motor 5.5 kW Width stop 1250 mm electromotive Scoring unit 1750 0.55 KW (0.75 HP) With manual height and side adjustment via external handwheels externally mounted hand wheels With saw blade quick clamping system APA Quickstep scoring system Tool-free manual adjustment adjustment of the scoring width From 2.8 to 3.8 mm with 0.05 mm grid adjustment per single step, incl. 1 Set of saw blades 125 x 2.8 - 3.8 x 50mm | Z = 12+12 Replacement HM scoring saw blade 125 x 2.8 - 3.8 x 50 mm Z = 12+12 (set = 2 pieces) for QuickStep scoring system