Used Klappverschluss Fastener for sale (455)

Condition: used, Monitoring module, safety module, controller, safety relay, relay Kjdpfxsdngwce Aa Ejdp -Manufacturer:Telemecanique, safety relay -Type: XPS-AL/SerieB -XPSAL5110 -Snap fastening on: 35 mm standard rail -Price per piece -Number: 6x available -Weight: 0.2 kg

Condition: good (used), Screw clamps with shaft, pipe clamps, pipe fastening -DN: 10/12 -DN: 20/22 Kdsdpfx Aaob A Sl So Esp -DN: 25/28 -DN: 50/55 -DN: 65/70 -DN: 80/85 -DN: 100/102 Price: complete Package weight: 11.5 kg

Condition: used, Table shear cutting knife, replacement knife for table shear, replacement cutting, cutting knife, shear knife -Spare knife: for guillotine shears, from stock for guillotine shears Fischer DHS 12/3000 -Quantity: 4 pieces available -Lengths: 2x 2650/100/25 mm / 2x 450/100/25 mm -Hole spacing: 200/250 mm, see photos -Accessories: incl. Box with fastening screws -Price: complete -Weight: 126 kg Kjdjharulopfx Aa Ejdp

Condition: good (used), Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck Kdodpfov Tlryox Aa Ejp -Manufacturer: Röhm, three-jaw chuck type DURO-S chuck size Ø 160 mm -Passage: Ø 42 mm -Bolt circle: Ø 83 mm -Mounting: Short taper 4 / cone 56 - 62 mm short taper flange with Camlock fastening -Dimensions: Ø160 x 115 mm -Total weight: 9.6 kg

Condition: good (used), screw clamps, pipe clamps, pipe fastening, hose clamps, line clamps -Pipe clamps: 90 pieces Kdodpfov A Sq Uex Aa Esp -Type: Ø12x15 -Clamping range: 12 mm -Band width: 15 mm -Price/Delivery: complete -Dimensions each: 40/28/H15 mm -Weight: kg

Condition: used, Chuck flange, flange mount, lathe chuck flange, driving flange Ksdpfed Hcqysx Aa Eodp -Chuck flange with: driving pin -Outer diameter: 190 mm -Camlock fastening: DIN 55029 -Cone size: 5 -Hole circle: Ø 104.8 mm -Weight: 8 kg

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Kdsdpfxsvvkipe Aa Esp

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity per storage section: 1,500 kg, total length: 34,000 mm, total height: 4,500 mm, shelf height: 4,500 mm, number of shelf rows: 3, load capacity: 13,500 kg, pallet spaces: 117 euro pallets, frame height: 4,500 mm, frame width: 1,100 mm, load per truss pair (max.): 4,500 kg, shelf length: 34,000 mm, support length: 2,700 mm, HEAVY DUTY PALLET RACKS 3 rows of pallet racks Each 11.3 m long, 4.5 m high, 1.1 m deep, Each with 4 bays, 2.7 m wide, Shelf load: 4,500 kg! Bay load: 13,500 kg! - 15 frames (RH4511) RAL5019 - 30 base plates, shims, fastening materials - 60 floor anchors (ZZBA1210) - 54 single beams (T27155!) RAL2008 - 3 load capacity signs (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - Max. 26 working days after payment received - Delivery to construction site / installation site included - Unloading from truck to be carried out by purchaser with own lifting equipment. Kdedpszkb Hdefx Aa Eep - Deliveries to all areas of the Federal Republic of Germany, except islands! Deliveries to EU countries are possible by individual arrangement.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,600 mm, Travel ranges: Ksdpfezi S E Uex Aa Esdp Longitudinal (X): 4000 mm Vertical (Z): 1600 mm Lateral (Y): 1300 mm Rotary table: Diameter: 1600 mm Maximum speed: 250 min⁻¹ Drive power (100% duty cycle): 53 kW Maximum transport load (positioning): 8000 kg Maximum transport load (rotation): 3000 - 8000 kg Work table: Length: 4000 mm Width: 1240 mm Height of work table: 760 mm Automatically indexing milling head: Tool interface: ISO 50, DIN 69871 AD Automatic tool clamping: Clamping force 20000 N Spindle speed range: Spindle speed: 20 - 5000 min⁻¹ Full power from 340 min⁻¹ Torque at 32 kW/S1: 900 Nm Main drive: Drive power: 43 kW Maximum rapid traverse rate: X-axis 45000 mm/min Y- and Z-axis 35000 mm/min Maximum feed force: X, Y and Z-axis 16000 N Automatic tool changer Magazine positions in M version: Maximum tool positions: SK 50 40 positions Maximum tool positions: Capto C8 20 positions Machine weight: approx. 32,100 kg Equipment: - Work table 4000 x 1240 x 760 mm with integrated rotary table Ø 1600 mm - Swiveling control panel with telescopic arm with HEIDENHAIN TNC 640 HSCI (6 axes + spindle) control, including 19" flat screen, metallic keyboard with integrated mouse and USB interface on the control panel. Processor speed 0.5 ms including HEIDENHAIN smarT.NC. - Interpolative turning with HEIDENHAIN TNC 640 HSCI consisting of CAM system, HEIDENHAIN postprocessor, software adaptation for C-axis (spindle). - Portable electronic hand-held unit HEIDENHAIN HR 520 with 5 m cable. - Automatically indexing milling head / 2 levels with 2.5° x 2.5° division and a tool clamping force of 20,000 N (H200), 32 kW / 900 Nm, tool interface ISO 50 - DIN 69871 AD. Mounting flange with Hirth gearing for adapting turning tool holders, grinding spindles or additional milling heads and a protective ring to cover the Hirth gearing; not required if H205 is selected. - Spindle drive 43 kW at 100% duty cycle via water-cooled HEIDENHAIN inline motor with direct power transmission. The motor is integrated into the milling slide. - Turning tool holder with Capto C8 interface (manual tool clamping) for turning operations incl. Hirth gearing and SK 50 interface according to DIN 69871 AD for adaptation to SORALUCE milling heads. (Semi-automatic changing with additional manual fastening by 8 x M8 screws); not required with fully automatic changing of the turning tool holder. - Pneumatically adjustable pick-up station (travel 500 mm) in the tool changer area for the turning tool holder and protective ring for semi-automatic changing. - Work table with integrated NC rotary table Ø 1,600 mm, for turning operations and for positioning operations with hydraulic clamping. - Rack and pinion drive in the X-axis via two servomotors controlled in a master-slave process.

Condition: used, functionality: fully functional, Year of construction: 1992, Ref. No.: Lg 35325 Single-sided decoiler PBK E 1200 Used, in good condition Year of manufacture: 1992 Technical data Load capacity approx.: max. 1,200 kg Strip width: max. 300 mm Expansion range: approx. 360 to 420 mm Outer coil diameter: approx. max. 1,500 mm Without drive, with pneumatic brake. Expansion of the supporting segments is manual via hand crank over joints. Number of supporting segments: 4 Coil side guide via heavy-duty limiting arms, can be clamped using quick-release fasteners. Uncoiler stand in robust box-type design as a welded structure. Kedpfx Aajxn Tprj Ejdp

Condition: used, mileage: 49,986 km, power: 103 kW (140.04 HP), first registration: 06/2021, fuel type: diesel, overall weight: 3,300 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,413 mm, total width: 2,050 mm, total height: 2,522 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal number: 1148. 2S21220 ----EQUIPMENT * Tow hitch (non-removable) * Doors: Rear doors opening 260° * Transmission: 6-speed manual * ABS * Storage compartments in the front doors * Airbag, driver's side * Radio: Audio system (DAB), MP3-compatible, Bluetooth hands-free system - Touchscreen - Roof antenna - USB - Control lever on the steering wheel * Exterior mirrors, electrically adjustable and heated * Turn signals in the exterior mirrors * On-board computer * Brake light, third * Tachometer * ESP with hill start assist and ASR * Parking assist system at the rear with acoustic warning sensors * Power windows, front * Glove compartment - lockable * Manual air conditioning including outside temperature display * Headrests (3), height-adjustable * Paint: Solid color paint * Interior lighting in the cargo area * Steering wheel, adjustable in depth * Emergency brake assist * Particulate filter: Diesel particulate filter * Upholstery: Fabric * Radio: DAB: digital roof antenna * Rub rails, side * Headlight range adjustment, electric * Sliding door: Sliding door, right side * Power steering * Seat belts, height-adjustable - Warning signal "Seat belt not fastened" (driver) * Seats: Double passenger seat - with 3-point automatic seat belts * Seats: Driver's seat, height-adjustable, passive, with lumbar support - Armrest Kdjdpfx Aaezhhucs Eop * Stop & Start system * Cruise control system including speed limiter * Partition, closed * Door: Automatic door unlocking in the event of an impact * Doors: Rear hinged doors, sheet metal up to 180° opening * Tie-down points in the cargo area * Immobilizer * Central locking with remote control ... and more ----The vehicle is in original condition! Nationwide delivery possible for an extra charge. Errors and prior sale excepted. We will gladly accept your vehicle as a trade-in. Financing / leasing also possible without a down payment! Do you have any further questions? We will be happy to advise you!

Condition: new, mileage: 10 km, power: 131 kW (178.11 HP), fuel type: diesel, empty load weight: 2,900 kg, maximum load weight: 5,200 kg, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 3, loading space length: 3,650 mm, loading space width: 2,050 mm, loading space height: 400 mm, Year of construction: 2025, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, air conditioning, airbag, cruise control, differential lock, fog lights, full service history, lane keeping assist, non-smoking vehicle, onboard computer, power assisted steering, start-stop system, tachograph, traction control, trailer coupling, Vehicle with truck registration (Cat. N) Driver fatigue warning system DDAW Blind spot sensor integrated in the rear bar or at the rear overhang Kdodjziw T Rjpfx Aa Ejp Blind spot monitoring system (2 sensors on the right side of the vehicle) Intelligent speed assistant – traffic sign recognition Monitoring system for the area in front of the vehicle when setting off (MOIS) CAB: Side mirrors mounted on arms for body width of 2.2 m Tinted windscreen Halogen headlights Widened wheel arches Fuel filler opening at the B-pillar of the cab Emission standard Euro VI lit. E Rear underrun protection, steel profile, with lighting Black radiator grille cover Daytime running lights (DRL) with bulbs Manual high beam activation Cab designed for a maximum width of 2000 mm Spare wheel in a pull-out basket under the rear overhang of the vehicle AdBlue tank 20 l (hidden in the entry area on the passenger side) Reversing signal with adjustable volume (72/55 dB) Batteries 2x12V 110Ah, for Daily 1x12V 110Ah Exhaust pipe centrally located under the vehicle between the axles Tow coupling 3.5 t Gross vehicle weight rating standard for vehicle type Wheel chocks, 2 pieces ESP system Fuel tank made of profiled plastic 70 l, filler neck in B-pillar (left side) Steel wheels Emergency brake system AEBS + City brake Mechanical parking brake with cable actuation Standard mounting of chassis components Splash guards for front axle Standard rear lights Tyres 195/75 R16 Acoustic comfort enhancement package Seat belt not fastened warning signal Telematics module Connectivity Box (4G) Warning triangle, 1 piece Central locking with remote control Thermal insulation of rear wall Lane departure warning system (LDWS) Tyre pressure monitoring system (TPMS), fitted at the valve Standard plastic headrests Standard key set with two keys (one key with remote if remote central locking is fitted) Steering wheel with soft plastic coating Digital tachograph DTCO 4.1, 1 day / 2 drivers, VDO Fabric seat upholstery (edges reinforced with vinyl) Heated and electrically adjustable exterior mirrors Automatic activation of lights and wipers COMFORT USB port A+C on driver’s side Infotainment system with 7-inch display Fog lights Cab ventilation and heating system with manual air conditioning Standard cruise control (CC) Air conditioning compressor 170 cm³ Comfortable driver’s seat with height-adjustable lumbar support (3-way adjustable, armrest) CONSTRUCTION 77742 Entry handles on A-pillar on both sides of the cab 72813 Electronic differential lock (Traction+) and hill start assist 00190 Steel cover for radiator and oil sump 06094 Two-stage multi-leaf rear springs (semi-elliptical) with auxiliary spring 00744 Window/windows in the rear wall of the cab 3-WAY TIPPER 3650x2050x400 Rear tailgate with opening and folding function, automatic rear tailgate opening system, side flaps for opening Wired remote control The floor is made of 3 mm thick hot-dip galvanized steel sheets 5-stage tipping cylinder with a maximum load capacity of up to 6 tons

Condition: excellent (used), Year of construction: 2022, Holzkraft Raw Air Extraction System Type: ASA 7703 For milling, planing, and saw chips (not suitable for dust) The 180° rotatable extraction unit allows suction guidance from below or above Robust metal impeller Equipped as standard with a high-quality mobility kit for increased stability and easy maneuvering Quick-release fasteners for filter and chip bag Dimensions and Weights: Length (approx.): 1900 mm Width/Depth (approx.): 670 mm Height (approx.): 2800 mm Net weight (approx.): 88 kg Kjdpfx Aoy Ahpxea Eodp Chip collection volume: 2 x 290 l Outer diameter of inlet extraction nozzle: 260 mm Outer diameter of outlet extraction nozzles: 3 x 120 mm, 1 x 100 mm Electrical Data: Motor speed: 2950 rpm Connection voltage: 400 V Power supply frequency: 50 Hz Input power: 4.8 kW Output power: 3.8 kW Filter: Filter area: 2 x 5.98 m² Noise Emission: Maximum sound pressure level: 98.3 dB(A) Airflow: Nominal airflow: 7700 m³/h Maximum negative pressure: 2800 Pa Location: Available from stock, 54634 Bitburg - Immediately available -

Condition: new, Year of construction: 2026, The subject of sale is a single-shaft shredder equipped with a hydraulic pusher. Brand/Manufacturer: 3E Machinery Model: WT40150 Main motor power: 90 kW Hydraulic system motor power: 5.5 kW Working rotor length: 1500 mm Rotor diameter: 400 mm Number of movable knives on the rotor: 94 pcs Dimensions of the movable knife: 40x40x25 mm, fastened with an M12 screw Single row of fixed knives, two-piece, the possibility of mounting a second row of fixed knives (upper) depending on the processed waste Kdedpfxsq Sp Evs Aa Esp Top-loading section widened to facilitate feeding waste into the shredder Hydraulic system equipped with an oil cooling system External bearing Inspection flap opened with the screen assisted by two actuators The machine is available at our warehouse in Częstochowa. Our offer includes not only individual shredding devices; upon request, we can provide a quote for a complete crushing line (conveyor feeding to the crusher, crusher, conveyor receiving with possible metal separation, grinding mill, big-bag station with a transport fan and a two-fraction cyclone). Also available in our offer: Knife mills Two-shaft crushers Four-shaft crushers Washing lines Systems for cable waste Used machines

Condition: used, mileage: 99,900 km, power: 100 kW (135.96 HP), first registration: 05/2017, fuel type: diesel, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, Equipment: ABS, central locking, soot filter, Chat with us now via WhatsApp: Get in touch quickly and easily with our sales consultant. Please note: Sales are primarily offered to commercial customers. Internal ID number: [3232] ----Optional extras: * 12–64 months warranty (valid throughout the EU) * New inspection * New TÜV & AU (German vehicle inspection) * Nationwide delivery Kedpfxszg Stao Aa Esdp * Financing available, even without a down payment * Trailer hitch / reversing camera can be retrofitted upon request! * Spring special: Upon request and for an additional charge of only €999, the towing capacity can be increased to up to 3,500 kg (vehicle and manufacturer dependent). ----Vehicle highlights: * 19% VAT can be shown * Regularly maintained * German vehicle * Immediately ready for use * Euro 6 standard * Accident-free * Automatic transmission * Long wheelbase * Large multimedia display * Cruise control * Trailer hitch * Reversing camera * 3 seats Special equipment: Exterior mirrors, electrically foldable, exterior mirrors, electrically adjustable and heated, both sides, Driving Assistance System: active parking assistant, wooden floor in the cargo area, interior filter: pollen filter, ambient lighting in the passenger/cargo compartment, fuel tank: enlarged, steering wheel (steering column mechanically adjustable), steering wheel with multifunction buttons including trip computer, PTC heater, seats in the cab: co-driver's seat as a double seat, seats in the cab: driver's seat heated, trim in the cargo/passenger compartment: plywood, heat-insulating glazing, two-way speakers at the front Additional equipment: 3rd brake light, adaptive brake lights, airbag on the passenger side, airbag on the driver's side, hill start assist, exterior mirrors, aspherical, both sides, outside temperature display, fastening rails for roof racks, brake assistant, braking system with ABS+ASR, roof light in the cargo area, driving assistance system: attention assist (fatigue detection sensor), driving assistance system: crosswind assist, windshield with antenna, generator 150 A, cup holders at the rear, cup holders at the front, seat belt pretensioners, grab handle on the passenger side, glove compartment lockable, body/superstructure: standard van, body/superstructure: long, cargo area partition, load securing/tie-down points, engine 2.1 L - 100 kW CDI CAT, rear fog lamp, wheelbase 3200 mm, low emission according to emission standard Euro 6, sliding door cargo/passenger compartment on the right, safety belt system with warning system (driver/passenger side), seat cover/upholstery: fabric, trim on window pillars, trim in the cargo/passenger compartment: hard fiber, half-height, lashing rails in the cargo area - side wall to roof frame, service interval display Assyst, permissible total weight 2.80 t ----Would you like to lease or finance? We offer attractive deals – even without a down payment! Please contact us. Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon-Fri: 9:00 a.m. – 6:00 p.m. Sat: 9:00 a.m. – 2:00 p.m. ----Note: All information on the internet is non-binding and serves only as a general vehicle description. Errors, typos and prior sale are reserved. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances. Vehicles with a mileage of more than 50,000 km or older than 3 years are preferably sold to our business customers.

Condition: like new (used), Clipping machine Manufacturer: Technopack Easy and quick closing of artificial and natural casings with the range of caliber from 25 to 75mm. The loops can be fastened automatically or manually. Dimensions:1800x1300x700mm Weight: 130kg Air pressure: 4-6bar Kdsdpextn Sxsfx Aa Esp Power supply: 230V / 50Hz

Condition: used, mileage: 44,209 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,200 kg, first registration: 06/2021, fuel consumption (urban): 8.4 l/100km, fuel consumption (extra-urban): 6.7 l/100km, fuel consumption (combined): 7.4 l/100km, CO₂ emissions: 194 g/km, emission class: euro6, energy efficiency: C, color: grey, suspension: steel, number of seats: 6, fuel: diesel, Equipment: ABS, air conditioning, airbag, all wheel drive, awning, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, seat heater, sliding door, soot filter, traction control, E07 Hill Start Assist, LG2 LED Intelligent Light System, RK4 AMG light-alloy wheels 8 J x 19, diamond-cut finish, VL7 AMG floor mats, D27 electric glass sliding-tilt sunroof, PS2 AMG Line, C1L AMG front bumper with trim elements in black, FB1 AMG trim elements, FB4 AMG rear spoiler on tailgate, JS1 360-degree camera, EZ6 Parking Package with 360-degree camera, ZK9 pop-up roof, Z3N Night Package, Q50 removable ball-type tow bar, EX8 Navigation Plus, EY5 Mercedes-Benz emergency call system, BS1 brake calipers with Mercedes-Benz lettering, EY6 breakdown management, VB3 fly/mosquito screens for sliding windows, G43 9G-TRONIC, CM2 bumpers and add-on parts painted in body color, FS5 illuminated mirrors for sun visors, FK4 grille painted black, FC1 electronic key in chrome finish, JK5 instrument cluster with color display, LG4 tail, brake, and indicator lights in LED technology, RK1 tires 245/45 R19, LG8 High Beam Assist PLUS, XO7 Mercedes-Benz Mobilo with DSB and GgD, SE5 driver’s seat lumbar support, SE4 passenger seat lumbar support, ZK8 roof bed, ZK7 Marco Polo, T70 child safety locks on rear doors, T74 entry grab handle, HH4 THERMOTRONIC automatic climate control, UR1 seat rail system with quick-release fasteners, E1E Digital Extra: hard disk navigation, V36 roof liner, E1D Digital Radio (DAB), Y10 first-aid kit, MJ8 ECO start-stop function, E1F display diagonal 26 cm (10.25”"), IB6 model series C447 Vito/V-Class, ES3 12V sockets for rear seat rows right & left, ES2 12V socket in boot. We will gladly prepare an individual financing or leasing offer and will accept your used vehicle in part exchange. We look forward to welcoming you to our dealership for further consultation. Vehicle condition in accordance with age/mileage, post-refinishing was carried out as part of reconditioning. No liability for printing or typographical errors. Subject to change and prior sale. ... more on our homepage Kodpfxoyvyumo Aa Ejdp

Condition: used, mileage: 118,633 km, power: 120 kW (163.15 HP), first registration: 09/2022, fuel type: diesel, next inspection (TÜV): 06/2028, fuel: diesel, color: silver, driver cabin: other, gearing type: automatic, emission class: none, suspension: other, number of seats: 2, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, parking heater, sliding door, soot filter, traction control, * Please schedule an appointment by phone for a consultation or test drive before your visit. This will help us avoid waiting times and allow us to dedicate sufficient time to you. TRANSMISSION / CHASSIS * Engine 2.0 L - 120 kW CDI CAT * Long wheelbase * Drive type: Rear-wheel drive * Panel van * Automatic transmission GTronic - (9-speed) EXTERIOR * Design and equipment line PRO * Pro * Tinted windows from factory * Seat belt system with warning system (passenger side) * Seat belt system with warning system (driver side) * Metallic paint LIGHTS & VISIBILITY * Daytime running lights * Windshield wipers with rain sensor * Automatic activation for headlights * Fog lights * Windows for rear doors / tailgate with wiper/washer system * Exterior mirrors, aspherical, both * 3rd brake light * Interior rearview mirror ENTERTAINMENT * DAB tuner (digital radio reception) * Audio navigation system Audio 40 (DAB+, Bluetooth, USB) * Steering wheel with multifunction controls incl. trip computer * Instrument cluster with pixel-matrix display * Radio generation 2 * Pre-equipment for Remote Services Plus * Two-way speakers ASSISTANCE SYSTEMS & SAFETY * Cruise control with distance control / Distronic Plus * Reversing camera * Parktronic * Parking package * Exterior mirrors with blind spot assist * Driving assistance system: Lane keeping assist * Driving assistance system: Attention Assist (fatigue detection sensor) * Driving assistance package * Anti-theft alarm system with interior protection, towing protection and battery horn * Start/stop system * Tire pressure monitoring system * Driving assistance system: Active brake assist * Brake assist * Mercedes-Benz emergency call system * Adaptive brake * Driving assistance system: Breakdown management * Driving assistance system: Crosswind assist * Speed limiter 210 km/h * Pedestrian protection * Live traffic information * Service interval indicator Assyst COMFORT * Seats in the cab: Driver's seat heated * Special control for auxiliary electric heater * Steering wheel (steering column mechanically adjustable) * Fabric Caluma black * Trim for window pillars * Seats in the cab: Driver's seat comfort * Seats in the cab: Driver's seat with lumbar support * Sliding door, cargo/passenger compartment, right * Seats in the cab: Passenger seat adjustable * Comfort lighting in the passenger/cargo compartment * Lockable glove compartment * Air conditioning controlled (Tempmatik) OTHER * Trailer coupling: Electrical system for trailer socket * Cargo compartment partition with window * Window in the cargo/passenger compartment: - fixed, front left * Window in the cargo/passenger compartment: - fixed, front right * Signage / printed material in German * Fuel tank: enlarged * Body/structure: Standard panel van * Interior trim in the cargo/passenger compartment: Hard fiber, semi-high * Cargo compartment light LED * BlueEfficiency package * Mounting rails for roof rack * Windshield with antenna * Low emissions according to emission standard Euro 6d * Outside temperature indicator * Load securing / lashing eyes * Particle filter Kdsdpfjzitm Tjx Aa Esp * Fastening points in the roof frame * Approved as a truck * Fleece battery 92 Ah * Exhaust purification SCR Generation 4 * and much more * The above information is without guarantee. It does not constitute an agreed characteristic. Errors and prior sale are reserved. * Our services: * Financing possible even without a down payment * Registration service * Trade-in of your old car * Delivery p

Condition: used, mileage: 92,100 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, first registration: 01/2020, emission class: none, color: white, driver cabin: other, suspension: other, number of seats: 8, fuel: diesel, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, sliding door, soot filter, trailer coupling, * Appointment for consultation and test drive = shorter waiting times: * Time is valuable and should not be spent waiting. Therefore, we kindly ask you to schedule an appointment by phone for a consultation or test drive. * Non-smoker * This vehicle has a well-maintained digital service record at Mercedes-Benz. * Last service performed at 76,611 km. TRANSMISSION / CHASSIS * Engine 2.0 L – 120 kW CDI CAT * Comfort suspension * Drive: Rear-wheel drive * Automatic transmission GTronic (9-speed) Kedpfx Aajxv Uwmo Ejdp DESIGN * Design and equipment line PRO * Roof lining * Arctic white paintwork LIGHTING & VISIBILITY * Daytime running lights * Windscreen wipers with rain sensor * Heated rear window * Automatic headlight activation * Heated windscreen washer system * Rear door/tailgate windows with wiper/washer * Both exterior mirrors aspherical * Third brake light * Interior rearview mirror ENTERTAINMENT * Navigation radio with DAB+ * Audio navigation system Audio 40 (DAB+, Bluetooth, USB) * Multifunction steering wheel including trip computer * Instrument cluster with pixel matrix display * Two-way speakers front and rear * Windscreen with integrated antenna ASSISTANCE SYSTEMS & SAFETY * Driver assistance system: Attention Assist (drowsiness detection) * Driver assistance system: Hill Start Assist * Driver assistance system: Breakdown management * Driver assistance system: Crosswind Assist * Cruise control * Engine start/stop system * Tire pressure monitoring system * Brake assist * Outside temperature display * Mercedes-Benz emergency call system * Adaptive brake * Child safety lock * Hill start assist * Maintenance interval display Assyst * Seatbelt system with warning device (driver/passenger) * Seatbelt system with warning device (passenger side) * Automatic deactivation of passenger airbag * 3-button remote control for central locking COMFORT * Driver's seat heated * Front passenger seat heated * Steering column mechanically adjustable * Upgraded interior trim * Aerodynamic underbody paneling * First row in load/passenger area: 3-seater bench, outer seat foldable * Second row in load/passenger area: 3-seater bench * Sliding door on right with glazing (load/passenger compartment) * Driver’s seat comfort * Passenger seat comfort * Driver’s seat with lumbar support * Passenger seat with lumbar support * Automatic climate control (Tempmatic) * Comfort lighting in passenger/load compartment * Power outlets (12V) in load/passenger area, double * Heat-insulating glazing * Rear entry grab handle * Centre console with storage compartment * Grab handles in the rear * Roof rack mounting rails * Tailgate area courtesy lighting * Active stopper for sliding door * Interior light(s) in the rear * Roof frame fastening points * A-pillar grab handles * Floor covering: TPO in passenger compartment * Fixed windows at the rear in load/passenger area OTHER * Low-emission according to Euro 6d-TEMP * Fixed ball-head tow bar * Enlarged fuel tank * Towing capacity 2,500 kg * Upgraded to 3.1 t GVW * Passenger car registration * And much more * All information provided without guarantee. They do not constitute a warranted characteristic. Subject to errors and prior sale. * Our services: * Financing also without down-payment...

Condition: new, axle configuration: 3 axles, loading space volume: 90 m³, Year of construction: 2026, Equipment: ABS, Axle spacing (mm) 1310-1310 Fifth wheel height (mm) 1150 Chassis width (mm) 1200 Loading width (mm) 2475 Internal height front (mm) (IHF) 2641 Internal height rear (mm) (IHB) 2778 Loading length (mm) 13513 Chassis neck height (mm) 217 Overall width (mm) 2550 Overall length (mm) 14000 Axles, brakes, and suspension Axles: SAF Brake type: Disc brake Brake type: SAF - SBS 2220 Offset (ET) 120 Option 1: Axle with lift axle and starting aid Starting aid activation via button in the truck Kdedpfx Aaszir Ive Eop Option 3: Axle with lift axle Brake pad wear indicator ECAS air suspension with raise and lower valve Lowering of air suspension via Smartboard, as well as raise and lower valve Control console, EBS operation on the left side in the direction of travel, behind the axles Standard Smartboard Air and electrical connection console in the center with gantry As a steel gear support winch, type Weweler, with support feet, one-sided operation, and 2 speed levels Position of support handle of the support winch on the outside Tires: 385/65R22.5 Wabco Trailerpulse Tire type: Regional distance TPMS sensor type: Rim-mounted sensor TPMS sensor supplier: ZF Lighting: Aspöck Lighting type: ECOLED III 2 LED reversing lights, mounted at the rear in the direction of travel on the left and right on the lamp carrier Position of work lights (operated via switch): 2 LED reversing lights at the front in the direction of travel LEDs in the door frame crossmember: 2 x 3 LEDs Splash guard, underrun protection Control console, sliding floor on the left behind the axles Hydraulic coupling, fifth wheel coupling - size 3/4, return line on the right Hydraulic coupling - gender: Female, return line to fifth wheel coupling Hydraulic coupling return line - size 1 - gender: Female Hydraulic coupling - hose 3,000 mm Hydraulic coupling - position: Connection option on the front wall (also with connection option on the support legs) Toolbox, direction of travel, air connection on the side of the instrument panel Aluminum access ladder 3.80 m - on the right in the direction of travel Position of broom and shovel holder on the side underrun protection on the left in the direction of travel Distance from the lower edge profile to the upper side wall at the rear: 2649 Profile, front wall: 3 mm - 2 mm Service door on the left in the direction of travel Side wall Profile, side wall: 3 mm - 2 mm Wear plates, rectangular: 1500 x 1000 x 4 mm Sliding floor system, manufacturer: Cargo Floor Operation of floor system: Wireless remote control Cargofloor Control type: CF 500 SL-C - E-CONTROL Number of floor profiles: 21 Floor profile: 8 mm ribbed, sliding floor, stainless steel With additional plastic guides under the floor profiles End cap reinforcement: Stainless steel shoes over the end caps of the floor profiles, with aluminum wear plate above the end caps Oil temperature sensor for sliding floor system Complete discharge wall: ALU Storage of complete discharge wall: 6 wheels Rear door Rear wall type: Swing doors Rear wall: Aluminum Design of swing door: 1/2 to 1/2 split, with door frame crossmember Opening of the door leaves: The right door leaf opens first Door frame crossmember: In a pivoting design Material of door frame crossmember: Aluminum Locking of rear doors: 1x twist bar / door half Number of door handles - door leaf left: 2 door handles per twist bar Number of door handles - door leaf right: 1 door handle per twist bar Fastening of the open door leaves: Spring holder with plasti

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 10 kg, arm reach: 1,100 mm, THIS ROBOT HAS NEVER BEEN USED The NACHI MZ10LF is a high-speed, high-precision 6-axis industrial robot designed for fast and reliable automation tasks such as pick & place, assembly, packaging, screw driving, and light to medium material handling applications. With its long reach structure and rigid arm design, it provides excellent cycle times and stable performance, making it ideal for high-volume production environments requiring extended working range. Applications: Pick & place, assembly, packaging, sorting, screw fastening, and general automation tasks. Technical Specifications: Model: MZ10LF Type: 6 axis Payload: up to 10 kg Reach: approx. 1100–1200 mm (long reach version) Repeatability: ±0.02 mm Axes: 6 Communication: PROFINET enabled Installation: Floor mounted Stock: Multiple options available Price: Please get in touch to get an offer Kdsdezgtwyspfx Aa Esp As PLC Merkezi EOOD, we have more than 500 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. We have a dedicated team handling these robots. If you share details about your project, we can recommend and provide the most suitable robot for your needs and support you throughout your project.

Condition: excellent (used), The devices shown in the pictures are robust, hand-operated lever presses from the ASTOR brand, model 52M. This type of press is used for riveting, crimping, attaching eyelets, snaps, and fasteners, as well as other assembly operations in leather goods, saddlery, footwear, and textile products. Description: Manufacturer: ASTOR Model: 52M Quantity: 2 units Hand-operated lever drive Heavy-duty cast iron construction Option to mount various working tools Stable base for screwing onto a table Simple and reliable design Ideal for saddlery, footwear, and upholstery workshops. Kdjdpfxozgtz Se Aa Eep

Condition: excellent (used), A robust German machine designed for riveting, crimping eyelets, snaps, and other fastening elements. Thanks to its stable construction and electric drive, it ensures consistent and precise operation. Technical specifications: Kdedpezgl Hyefx Aa Esp Manufacturer: Constantin Hang Maschinenfabrik Model: 167-12 Serial number: 34,756 Power supply: 220/380 V Motor power: 0.25 kW Motor speed: 1390 rpm Electric drive with foot pedal 220 V electromagnetic brake Adjustment of working settings Stable industrial construction Made in Germany Condition: Used machine, in good visual condition. Condition as shown in the photos. Sold in the exact condition as depicted in the photographs.

Condition: used, Available quantity: 3 units Manufacturer: Cleco Model: 48ESE25D3 Product type: Electric torque screwdriver Condition: used Design: Inline screwdriver Application area: Industrial series assembly Drive: electric Use: Controlled screw fastening Suitable for: Production and assembly lines Kdedpjzgf D Esfx Aa Eep Industrial design: yes

Year of construction: 2017, condition: used, Embossing machine Kolbus PE 312 Age: 2017 Machine is intended for blind embossing, film embossing and hot embossing of firm, flexible and plastic cases. Configuration: - Copilot system with touch screen - Case pre-stacking conveyor (positioning with case overlap) - Case bending station - Case supply with 90 ° pivoting option (format-dependent) - Film feeder with two film pulling rollers - Unwinder - Film withdrawal unit - Motorised embossing head adjustment (max. 70 mm) - Divided embossing table plate - Correction rails for positioning precisely according to the register - Temperature-controlled embossing head heater with timer for pre-heating Kodpfx Aajzgc Ibs Eedp - Linear deposit belt with delivery table including overlap width setting - Automatic case counter - Servo-controlled drive technology based on Siemens technology - Counter-stacker delivery to the right with roller conveyor delivery Special equipment: - 1 embossing plate for accommodating the embossing tool (adhesive fastening) - 1 embossing plate with grid holes for accommodation (screw connection) - Case set-up outside of the machine for reducing the make-ready time - 3rd film pulling roller controlled by step motor for the 1st film feeder - 2nd film feeder with two film feed rollers controlled by step motors - 3rd film pulling roller controlled by step motor for the 2nd film feeder - Set-up for embossing time extension - Set-up for multiple embossing - Cycled feed for ideal utilisation of the film Technical specifications: - opened case (hardcover) max.: 660 x 405 mm - opened case (hardcover) min.: 155 x 100 mm - opened case (flexible embossing material) max.: 400 x 300 mm - opened case (flexible embossing material) min.: 135 x 100 mm - case pre-stacking conveyor min.: 155 mm - pressure surface max.: 460 x 355 mm - pressing force max.: 350 KN - mech. speed: up to 80 embossings/min