Used Kern 2500 Document for sale (10,901)

Condition: ready for operation (used), Heidenhain UM 114 . 325 005-12 SN: 12918615, professionally overhauled and tested with 3 months warranty, in good condition, 100% fully functional, scope of delivery as per photos. Podsx Etd Tjpfx Ahcera

Condition: ready for operation (used), Heidenhain UM 121 ID: 325 003-02 Inverter - Power Supply Unit SN: 131285638C9 in exchange (Exchange service), professionally completely overhauled and tested with 3 months warranty, 100% functional, scope of delivery as per photos. Please note: In the exchange process, your defective exchange part must not have any mechanical damage, such as breakage, as these cannot be repaired. In such cases, an additional charge of €400 incl. VAT will apply. Attention: You are bidding on a Heidenhain UM 121 inverter (325 003-02, SN: 131285638C9) in exchange (Exchange service), professionally overhauled and tested with 3 months warranty, 100% functional, delivery scope as shown in the photos. In both the repair and exchange procedures, your defective exchange part must not exhibit any mechanical damage such as breakage, as these are no longer repairable. In this case, a subsequent invoice of €400 incl. VAT will be issued. Pjdpfxex Etf Re Ahcsra

Condition: good (used), functionality: fully functional, Year of construction: 2017, operating hours: 390 h, Trench roller No. 3 Wacker Neuson RT 82 SC 3, year of manufacture 2017, 390 operating hours, weight 1495 kg, Kohler diesel engine 14.8 kW, serial no. 24386997, remote control + cable, fully functional, with extensions. Prsdpfx Ahjym N N Hocsa

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 15 h, load capacity: 2,500 kg, lifting height: 4,040 mm, fuel type: electric, mast type: duplex, construction height: 2,830 mm, fork length: 1,000 mm, drive type: Elektro, Four-way side loader Pjdjyn Suhopfx Ahcora Mast type: Duplex Condition: As new Technical condition: very good Fork positioner,

Condition: good (used), Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, travel motor, drive motor -Manufacturer: Bosch, hydraulic pump -Type: Shaft: conical Ø 14-17 mm Prsdpfowzi A Rjx Ahcoa -Flange: Ø 80 mm -Quantity: 1x pump available -Dimensions: 150/125/H120 mm -Weight: 3.7 kg

Condition: new, functionality: fully functional, power: 18.9 kW (25.70 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 15 l, color: yellow, overall weight: 2,290 kg, maximum load weight: 1,000 kg, tire size: 10.00 / 75 – 15, tire condition: 100 %, number of seats: 1, emission class: euro5, shovel volume: 0.525 m³, Year of construction: 2026, operating hours: 1 h, Equipment: all wheel drive, differential lock, standard shovel, === KEY SPECIFICATIONS === Year of manufacture: 2026 Hours: 0 h (new) Operating weight: 1,290 kg Pedpfx Ahsx Ux Ayocjra Max. payload: 1,000 kg Bucket type: High-Tip bucket Bucket capacity: 0.525 m³ (heaped) Drive: Hydrostatic / Automatic Four-wheel drive: Yes Differential lock: Yes (hydrostatic twin-lock) Quick coupler system: No Cabin: Open (ROPS) Heated cabin: No Air conditioning: No Tyres: Rough terrain / Pneumatic Engine manufacturer: Yanmar Engine type: 3TNV76 Engine power: 18.9 kW Emission class: Stage V Hydraulic flow: 84 l/min CE certified: Yes === HIGHLIGHTS === Carefully selected machine with verifiable technical specifications CE-certified and compliant with current EU standards Ready for immediate use and transport Full technical documentation available High-Tip bucket for increased dumping height and easier loading === CONDITION === Excellent working condition – new machine, fully inspected, tested, and approved by certified professionals. Inspection available upon request. === LOCATION & PRICE === Located in Sittard, Netherlands. Worldwide delivery possible. Price on request (EXW / excl. VAT). Reliable machinery with full manufacturer documentation and professional technical support. Part of one of the largest European inventories of new and used machines. All machines are fully inspected, CE-approved, and ready for immediate deployment. Spare parts and professional assistance available on request. === DELIVERY === Crane loading available on request for smooth and efficient transport. Flexible shipping solutions tailored to your destination and logistics preferences. All transport is professionally handled by the logistics team of Collé Rental & Sales.

Condition: used, mileage: 1 km, axle configuration: 4x4, gearing type: automatic, Year of construction: 2007, GVW: 1 kg Pjdpfx Aox R T Uvehcora Please contact Emal Jaweed for more information

Condition: excellent (used), Year of construction: 2020, operating hours: 2,139 h, functionality: fully functional, machine/vehicle number: NL257200651, turning length: 700 mm, turning diameter: 366 mm, spindle motor power: 19 W, spindle speed (max.): 4,000 rpm, spindle bore: 91 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, overall weight: 5,800 kg, We are offering this very well-maintained and low-hour DMG MORI NLX 2500/700 CNC turning and milling center, year of manufacture 2020. Manufacturer: DMG MORI Model: NLX 2500/700 Year: 2020 Condition: Excellent Category ID: 1128 Type ID: 2239 Type: CNC Turning and Milling Center Machine hours: 7,598 h Program runtime: 2,139 h Details: Base machine: NLX 2500/700 with driven tools and C-axis Universal lathe with 3 axes Turning length: 700 mm Main spindle with integrated motor spindle ISM 80 (bar capacity in mm) AC motor with 15 / 18.5 / 18.5 kW power (100% / 50% / 25% duty cycle) 4,000 rpm Hydraulic clamping system (see clamping cylinder/chuck) C-axis with hydraulic spindle brake 10-station BMT turret 10-station driven tool turret NC tailstock CELOS® with Mitsubishi control M730UM Control: Mitsubishi M730UM controller with CELOS CELOS - ERGOline Touch Spindle: Main spindle (Spindle 1) standard Spindle options: Oil blower cooler for circulating coolant oil Chuck for main spindle: Main spindle (Spindle 1) 10" hollow chuck Ø254 mm Main spindle (Spindle 1) hollow clamping cylinder for 10" chuck Ø254 mm BB210A821 Chuck options: Double foot switch with protective cover Tool turret: Rotating tools with 40/14 Nm, 10,000 rpm 12-station BMT60 turret for MC configuration Overhang for driven tools 100 mm (limited Y-axis travel) Tailstock: NC tailstock taper for live center MK 5 (live center not included) Prsdpfoyxglksx Ahcoa Coolant / Chip removal: Use of water-soluble coolant (emulsion) Hinged belt chip conveyor, discharge right (500,700) Coolant system with increased pressure, 5 bar I/F for oil mist separator (extraction opening Ø 150 mm + electrical components) (AFS 1100) AFS 1100 oil mist separator Measuring / Monitoring: Manual tool presetter (swiveling, standard) Additional options: Customer voltage: 380 V Frequency: 50 Hz Metric setting SCHNEIDER transformer 45 kVA Technology cycles: Alternating spindle speed Control options: X-axis direction ISO Last maintenance: April 2024

Condition: new, power: 19 kW (25.83 HP), gearing type: hydrostat, fuel type: diesel, color: yellow, Year of construction: 2025, operating hours: 1 h, loading space volume: 2 m³, fuel: diesel, Technical information Make of engine: 3TNV76 Diesel Top speed: 20 km/h Empty weight: 2.142 kg Functional CE mark: yes Condition Psdpjxdazajfx Ahcora General condition: very good Technical condition: very good Visual appearance: very good Other information Tyre brand: 11.5/80‑15.3 Mitas TS‑05 Output of the auxiliary hydraulics: 66 l/min Max. working load: 3000 kg Emission level: Stage V / Tier V Delivery terms: EXW Transport dimensions (LxWxH): 3,710 × 1,730 × 2,778 Production country: DE Additional information Please contact Sales Department Collé Sittard for more information = Additional options and accessories = - Rotating beacon

Condition: new, functionality: fully functional, power: 36 kW (48.95 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 45 l, color: yellow, overall weight: 2,900 kg, maximum load weight: 4,000 kg, lifting height: 1,014 mm, tire size: 11.5/80-15.3 Mitas TS-05, tire condition: 100 %, axle configuration: 4x4, number of seats: 1, emission class: euro5, Year of construction: 2025, operating hours: 1 h, Equipment: all wheel drive, === KEY SPECIFICATIONS === Year: 2025 Operating hours: 2 h Operating weight: 2,690 kg Max payload: 4,000 kg Skip capacity: 2.3 m³ (heaped) Transmission: Hydrostatic Four-wheel drive: Yes Differential lock: Yes Quick hitch: No Cab type: Open ROPS / Optional closed cab Heated cab: No Air conditioning: No Tyres: Rough terrain 4x4 Engine manufacturer: Perkins 403J-E17T Engine power: 36 kW (49 HP) Emission class: Stage V Hydraulic flow: n.a. CE certified: Yes === HIGHLIGHTS === Brand-new 2025 model with only 2 operating hours Perkins Stage V engine – powerful and fuel efficient ROPS frame or optional enclosed cabin Full CE certification and documentation included Compact and robust dumper for heavy-duty work Reinforced skip with 2.3 m³ heaped capacity === CONDITION === New, unused, and fully operational Inspected and ready for immediate use Available directly from stock in Sittard === LOCATION & DELIVERY === Predpfx Ahoxg Dcaecja Located in Sittard, Netherlands Worldwide delivery available Price on request (EXW, excluding VAT) Reliable first-owner dumper with full CE approval and test documentation Ideal for earthmoving, construction, and site transport applications Manufactured in Austria to the highest quality standards Supported by Colle Rental & Sales professional service team === DELIVERY === Crane loading available on request for easy handling Flexible transport options tailored to your destination All logistics handled professionally by Colle Rental & Sales

Condition: new, functionality: fully functional, Year of construction: 2024, total length: 2,516 mm, load capacity: 2,500 kg, empty load weight: 400 kg, construction width: 815 mm, Crane arm ISO class: ISO class 2 = 1,000 - 2,500 kg Prodpjwmtznjfx Ahcoa Condition: New device Technical condition: New Description: 12 months warranty

Condition: used, Year of construction: 2017, operating hours: 300 h, functionality: fully functional, total width: 2,160 mm, total length: 1,350 mm, total height: 1,700 mm, pressure: 2,500 bar, operating pressure: 2,500 bar, fuel: diesel, overall weight: 1,850 kg, rotational speed (max.): 1,800 rpm, high-pressure hose length: 20,000 mm, empty load weight: 1,850 kg, fuel tank capacity: 140 l, type of cooling: water, power: 120 kW (163.15 HP), water pressure: 2,500 bar, pump capacity: 25 l/min, Equipment: crane, type plate available, CD160-2500 with 2500 bar and 25 l/min. The pump is powered by a water-cooled 4-cylinder SISU diesel engine. The entire frame is made of hot-dip galvanized steel, ensuring long durability and corrosion resistance. The frame is equipped on all four corners with rubber feet, forklift pockets, and lifting eyes. The machine features a galvanized roof plate with a side mount for the protection and storage of, for example, high-pressure hoses. Similar to but not a Dynajet, Falch, Hammelmann, Kamat, Uraca, Woma, etc. General Specifications: Operating pressure: 2500 bar Flow rate: 25 l/min Pedsxufbtopfx Ahcsra Max. pump speed: 560 rpm Drive engine: 4-cylinder SISU diesel Drive engine output: 119.3 kW Drive engine speed: 1800 rpm Tank: 140 L Max. fuel consumption: 26 L/h Dimensions and unladen weight (SKID): 2160 mm x 1350 mm x 1700 mm (1850 kg) Standard accessories included.

Year of construction: 2009, condition: ready for operation (used), LAMINATING MACHINE FOR IPS DOORS MODEL: PC-2500-SCBP Machine for applying adhesive protective film to flat surfaces. Equipped with motorized feed with rollers and an automatic cutting system. Machine for a fixed-height table line, +/- 900 mm. Year 2009. Simultaneous top and bottom adhesion. TECHNICAL CHARACTERISTICS OF THE MACHINE - MINIMUM / MAXIMUM WORKING THICKNESS 15 / 50 MM - MAXIMUM WORKING WIDTH 2,400 MM - HEIGHT OF ROLLER, ADJUSTABLE FROM THE FLOOR 840 / 950 MM Prjdpfx Aohkr Anehcea - TOTAL POWER CONSUMPTION OF THE MACHINE 3 KW - MINIMUM REQUIRED AIR PRESSURE 6 BAR - ELECTRICAL INSTALLATION VOLTAGE 220 V - 380 V

Condition: used, Year of construction: 2016, operating hours: 4,098 h, 2016 | Wacker Neuson 50Z3 with 3 excavator buckets | Used Mini Excavator < 7t | 4098 hours Prjdpfx Ahey D T A Tocja 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 24500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 63 inspection points 58 approved ✅ 5 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good overall condition, moderate play in the boom, cleanup bucket needs redoing. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39893 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, Year of construction: 2026, machine/vehicle number: Cone G25_2026_1, functionality: fully functional, controller manufacturer: CoastOne, controller model: Touchscreen 15", working width: 2,600 mm, bending force (max.): 80 t, warranty duration: 36 months, control type: NC control, degree of automation: manual, type of crowning: CNC-controlled, actuation type: electric, Equipment: CE marking, angle measuring system, angle stop, documentation/manual, emergency stop, european tool clamping system, finger protection, lower tooling, safety light barrier, upper tooling, Electromechanical CNC press Manufacturer: CoastOne Oy Type: Cone G25 Pressing force: 800 kN Bending spindles: 4 Controlled axes: X-R axis (2x manual stop fingers) Standard Type A / R1 / AMADA / Promecam press brake tool holder Control: TC15-2D graphic touch screen Options: - 4 or 5 axis backgauge system - Lazersafe light barrier system standard - Lazersafe IRIS light barrier system Predpjy A Nm Sefx Ahcoa - Lazersafe IRIS+ light barrier system angle measuring system - extra screen with 3D bending software - support table - Light front and rear - WILA / Trumpf / Type B - tool holder system - 2x bending aids 36 months warranty after installation

Year of construction: 2016, condition: ready for operation (used), - USED - 7-AXIS TWIN-SPINDLE CNC LATHE MAX ROTATING DIAMETER: 800 mm MAX TURNING LENGTH: 350x2 mm MAX TURNING DIAMETER: 300 - 390 mm BAR CAPACITY: 76 mm SPINDLE: 3500 rpm; 22-26 kW; ASA A2-8 COUNTER SPINDLE: 3500 rpm; 22-26 kW; ASA A2-8 X1-AXIS TRAVEL: 255 mm X2-AXIS TRAVEL: 190 mm Y-AXIS TRAVEL: ± 60 mm Z1-AXIS TRAVEL: 800 mm Z2-AXIS TRAVEL: 900 mm RAPID FEEDS X-Y-Z: 20 - 7,5 - 24 m/min DRIVEN TURRET HEAD: 12 ; 12 POS; 4000 ; 4000 rpm; 5,5 ; 5,5 kW CONTROL UNIT: FANUC 31i-B Prsdpoyyd Uljfx Ahcea WEIGHT: 12700 Kg OVERALL DIMENSIONS: 4050 x 2210 x 2480 mm ACCESSORIES: SWARF CONVEYOR ; PIECE CONVEYOR ; TOOL SETTER

Condition: used, Year of construction: 1996, - Brand : Omme - Type: 2500 EBDZ - Year built: 1996 - Weight: 2880 kg. - Hours: 587 hours - Drive: Kubota diesel + Battery + 220 volt - Working height: 25 meters - Lateral reach: 12.7 meters - Wheel Drive / Movers - Extra nose wheel - Stamp plates 4x - Drive plates 4 x - Dutch license plate - second owner - Safety inspection possible - Aerial work platform book available - Maintenance history dealer present - CE document available - Trade-in and transport possible - Video on our website * Brand: around Prsdoyy Dmbopfx Ahcja *Type: 2500 EBDZ * Construction year: 1996 * Weight: 2880 kg. * Lateral reach: 12.7 meters * Working height: 25 meters * Hours: 587 uur

Condition: good (used), Year of construction: 2011, lifting height: 4,330 mm, fuel type: diesel, mast type: duplex, power: 38 kW (51.67 HP), motor manufacturer: Mazda 4cil, Empty weight: 4.110 kg Predpfxey T Rkyj Ahcja Lifting capacity: 2.500 kg Number of valves: 3 Technical condition: good Visual appearance: good Fork carriage: Sideshifter Please contact Theo Lelie for more information

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 177 kg, fuel type: gasoline, color: yellow, power: 13.5 kW (18.35 HP), output current: 16 A, Wacker Neuson GS 12 AI Generator NEW Wacker Neuson GS 12 AI Generator – NEW | Continuous output: 5.0 to 9.4 kVA | 12 kW Honda petrol engine | Electric start | 230 / 400 V voltage | incl. trolley frame | Operating weight: 177 kg Item number: 5000620317 Technical Specifications: Manufacturer: Wacker Neuson Model: GS 12 AI Condition: NEW Operating Weight: 177 kg Continuous Output: 5.0 to 9.4 kVA Engine: Honda GX 630 petrol engine Engine Power: 12 kW Starting System: Electric Voltage: 230 V / 400 V Connections: 2 x Schuko 230 V / 16 A, 1 x CEE 230 V / 16 A, 1 x CEE 400 V / 16 A, 1~ CEE 7/3 Special feature: Incl. trolley frame Highlights & Features: - Powerful generator – ideal for construction sites & industry - Robust Honda engine – reliable & easy to maintain - Electric start – convenient & fast - Integrated chassis – mobile & versatile - Made by Wacker Neuson – proven quality & immediately available Applications: ✓ Construction site supply & trades ✓ Events & temporary power supply ✓ Agriculture & municipal operations ✓ Workshop & emergency power supply ✓ Commercial use Location: Warehouse D-46514 Schermbeck (NRW) – Inspection and collection possible Delivery: Germany-wide & international upon request Pricing: ex stock Maassenstraße 91, D-46514 Schermbeck (Wesel district) Podpfezh Dv Njx Ahcera All information without guarantee. Subject to prior sale and errors. Prices plus VAT / VAT excluded Other models and sizes available! Also in stock: GV 7003 A etc. ➡️ New & used machines, accessories & spare parts Buy a Wacker Neuson Generator | GS 12 AI NEW | 12 kW petrol generator | Construction site generator with 400/230 V | Honda GX 630 engine | Wacker Neuson quality Your reliable partner for generators & construction machinery: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Contact us now & secure immediately available new equipment! A virtual inspection of the machine via video call is available on request.

Condition: new, functionality: fully functional, power: 3.1 kW (4.21 HP), fuel type: diesel, color: yellow, operation weight: 171 kg, Year of construction: 2026, Equipment: UVV, Wacker Neuson DPU 2560 Hts Vibratory Plate – NEW Wacker Neuson DPU 2560 Hts Vibratory Plate – NEW | 25 kN centrifugal force | 600 mm working width | Hatz diesel engine 1B20 with 3.1 kW output Article number: 5000610038 Technical Specifications: Manufacturer: Wacker Neuson Model: DPU 2560 Hts Condition: NEW Operating weight: 171 kg Frequency: 90 Hz Centrifugal force: 25 kN Working width: 600 mm Engine: Hatz 1B20 diesel engine Engine power: 3.1 kW Fuel: Diesel Start system: Recoil starter Compaction class: Medium-duty compaction Surface coverage: approx. 624 m²/h Highlights & Features: - Compact diesel vibratory plate for versatile applications - Robust design – ideal for daily construction site use - 600 mm working width – high surface coverage in a compact form - Ergonomic guide bar – low vibration & comfortable handling - Reliable Hatz diesel engine – powerful & efficient - Made by Wacker Neuson – proven quality, immediately available Fields of Application: ✓ Paving and medium-sized areas ✓ Landscaping and gardening ✓ Municipal applications & construction companies ✓ Fibre-optic & cable installation ✓ Compaction tasks on small to medium-sized sites Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Nationwide & international delivery on request Price ex-works Maassenstraße 91, D-46514 Schermbeck (Wesel district) Prjdpfezh D Iljx Ahcea All information subject to change. Errors and prior sale excepted. Prices are net of VAT / VAT excluded Other models and sizes available! Also in stock: DPU 3060, DPU 3760, etc. ➡️ New & used machines, accessories & spare parts Buy Wacker Neuson vibratory plate | DPU 2560 Hts NEW | Diesel vibratory plate 25 kN | Vibrating plate 600 mm working width | Hatz engine | Wacker Neuson compaction technology | Vibratory plate for paving work Your reliable partner for compaction technology & construction machinery: Claudio Macagnino Construction Machinery & Commercial Vehicle Trading GmbH ➡️ Enquire now & secure immediately available new equipment! A virtual inspection of the machine via video call is available upon request.

Condition: new, functionality: fully functional, power: 9.6 kW (13.05 HP), fuel type: diesel, color: yellow, operation weight: 504 kg, Year of construction: 2026, Equipment: UVV, Wacker Neuson DPU 6555 Heh Vibratory Plate – NEW Wacker Neuson DPU 6555 Heh Vibratory Plate – NEW | 65 kN centrifugal force | 710 mm working width | Hatz 1D81S diesel engine with 9.6 kW | Electric start & operating hours counter Item number: 5100009636 Technical Data: Manufacturer: Wacker Neuson Model: DPU 6555 Heh Condition: NEW Operating weight: 504 kg Frequency: 69 Hz Centrifugal force: 65 kN Working width: 710 mm Engine: Hatz 1D81S diesel engine Engine power: 9.6 kW Fuel: Diesel Starting system: Electric start Compaction class: Heavy-duty compacting Performance: approx. 1,140 m²/h Highlights & Features: - Powerful vibratory plate for demanding compaction jobs - Robust construction – ideal for intensive use on construction sites - 710 mm working width – high area performance with a compact design - Convenient electric start & integrated hour meter - Reliable Hatz diesel engine – powerful & durable - Made by Wacker Neuson – proven quality & immediately available Applications: Podjzh Egcjpfx Ahcera ✓ Civil engineering & road construction ✓ Pipeline & sewer construction ✓ Construction companies & municipal use ✓ Compaction tasks on large construction sites Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Delivery throughout Germany and internationally upon request Price quoted ex works Maassenstraße 91, D-46514 Schermbeck (district of Wesel) All information without guarantee. Subject to errors and prior sale. Prices plus VAT / VAT excluded Other models and sizes available! Also offering DPU 6260, DPU 5275, etc. ➡️ New & used machines, accessories & spare parts Buy Wacker Neuson vibratory plate | DPU 6555 Heh NEW | Diesel vibratory plate 65 kN | Vibratory plate with electric start | Hatz diesel engine | 710 mm working width | Wacker Neuson compaction technology | Vibratory plate for civil engineering & road construction Your reliable partner for compaction technology & construction machinery: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Contact us now & secure immediately available new equipment! Virtual inspection of the machine via video call available on request.

Condition: used, Year of construction: 2010, 2010 | Wacker Neuson DPU130 | Used Hand compactor 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 6800 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 0 inspection points 0 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Lombardini engine. Reversible plate with remote control. Impact force 5 tons. Low hours. The eccentrics were replaced at 285 hours. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40831 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Pedpey Ruklsfx Ahcjra 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: ready for operation (used), Heidenhain UM 121 ID 325003-02 The cost covers only the repair analysis of your component, which you can send to us. After your component has been assessed, you will receive a quotation with the actual repair costs. Once you approve the repair, the analysis cost will be waived. As part of the repair process, your component will be completely overhauled and comes with a 3-month warranty from us. Pedpfsy Nrfdsx Ahcora

Condition: excellent (used), KUKA KUKA KR 180 R2500 extra Industrial Robot + KRC4 Controller For sale is a powerful industrial robot from KUKA, model KR 180 R2500 extra, including KRC4 controller and teach pendant. The system was used in an industrial environment and is fully operational. It is ideally suited for automation, material handling, welding applications, and general production processes. Robot Technical Specifications: - Payload: 180 kg - Reach: approx. 2496 mm - Axes: 6 - Weight: approx. 1059 kg KRC4 Controller Technical Specifications: - Supply voltage: 3 x 400 V - Frequency: 50/60 Hz - Full load current: approx. 20 A - Circuit protection: 25 A Predpjy Dn Siofx Ahcja - Weight: approx. 151 kg Dimensions (approx.): - Robot height: approx. 2200 – 2500 mm - Footprint: approx. 1000 x 1000 mm - Controller (H x W x D): approx. 1000 x 800 x 800 mm Software / System: - KRC Version: V8.2.22 - HMI Version: 8.2.0.4 B142 - Base System: KS V8.2.142 - Windows Version: XPe V3.0.2 - Additional Axes: 1 Features: - KUKA KRC4 controller - KUKA teach pendant (operator panel) - Connection cables and wiring - Industrial design for continuous operation Condition: - Used, technically fully functional - With normal signs of use - The system was in operation until recently Scope of delivery: - KUKA KR 180 R2500 extra robot - KUKA KRC4 controller - KUKA teach pendant (operator panel) - Connection cables / wiring as depicted in the photos - Scope of delivery: (See images) (Subject to change and errors in technical data; all information provided without liability!) We are happy to answer any further questions by phone.

Condition: used, Basic dimensions: Width: approx. 2,500 mm Height: approx. 938 mm Depth: approx. 900 mm Technical data for the workbench: Manufacturer: Polypal Type: Stockpal The scope of delivery includes: 02x workbench stand, used Material color: anthracite Stand height: 900 mm Stand depth: 900 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( screwed framework ) 04x Workbench traverse, used Material color: orange Box profile: 120 x 50 mm clear width: 2,300 mm 08x Locking pin, second-hand Version: sendzimir galvanized For securing the side rails against unintentional lifting out 01x Chipboard II. Choice, used Chipboard thickness: 38 mm Chipboard width: 2,500 mm Depth chipboard: 900 mm Surface: possibly coated (two-piece if required) 01x Chipboard II. Choice, used Chipboard thickness: 38 mm Chipboard width: 2,280 mm Depth chipboard: 900 mm Surface: possibly coated (two-piece if required) 06x drilling screw, new Finish: galvanized Dimensions: 6.3 x 70 mm 04x Z-bracket, used for locking / inserting chipboard galvanized surface Remark: - The pictures serve to illustrate the material. - The material color may vary. - The workbench frames are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3-5 working days. You are also welcome to purchase the workbenches from us in the following depths: Workbench 2,500 x 600 mm / 2 levels / (221.00€ net) Workbench 2,500 x 700 mm / 2 levels / (229.00€ net) Workbench 2.500 x 800 mm / 2 levels / (238,00€ net) Workbench 2,500 x 1,000 mm / 2 levels / (254.00€ net) Workbench 2,500 x 1,050 mm / 2 levels / (259.00€ net) Workbench 2,500 x 1,100 mm / 2 levels / (263.00€ net) Workbench 2,500 x 1,200 mm / 2 levels / (271.00€ net) Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately Psdpfx Ahetgkwmscjra depending on the place of delivery or scope of delivery.