Used Jrion Hfs 140Sa for sale (261)

Condition: ready for operation (used), Balluff BIS M-352-001-S115 RFID HF Reader BIS00NY SN: 84877, used, minor signs of wear, 100% functional, scope of delivery as per photos. Psdpfoy Np Ehox Aahspu

Condition: new, Year of construction: 2018, functionality: fully functional, cooling capacity: 15.5 kW (21.07 HP), type of input current: three-phase, type of cooling: air, overall weight: 140 kg, input voltage: 400 V, total width: 370 mm, total length: 900 mm, total height: 940 mm, warranty duration: 12 months, Aircooled chiller CLIMAVENETA I BX 015T 15.5 KW Cooling capacity: 15.5 kW / 4.41 tons (12/7 — 35°C) Year of manufacture: 2018 Options: Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi DNB36FAEMT (scroll, inverter) Type of refrigerant: R410а Number of fans: 2 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump Wilo Yonos PARA HF 25/10 (inverter), expansion vessel. Dimensions: 0.9x0.37x0.94 m. Weight: 140 kg. Working hours: 0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. Ppsdpfx Aezd Rnwsahju WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Year of construction: 1991, condition: used, machine/vehicle number: 498, Dücker Anbau Schredder / Buschhacker / Häcksler für Unimog oder Traktor Typ Dücker HF 760 Zapfwellenantrieb vom Trägerfahrzeug Gewich 850 kg bis 22 cm Durchlass Maße 2000 x 1950 x 2600 Privatverkauf im Kundenauftrag. Nähere Daten und weitere Bilder erhalten Sie gerne auf Anfrage. Diese Beschreibung stellt kein verbindliches Angebot dar und kann Fehler beinhalten, keine Gewähr auf alle Angaben.Dücker Anbau Schredder / Buschhacker / Häcksler für Unimog oder Traktor Typ Dücker HF 760 Zapfwellenantrieb vom Trägerfahrzeug Gewich 850 kg bis 22 cm Durchlass Maße 2000 x 1950 x 2600 Pjdpfx Aaezcbl Sjhspu Privatverkauf im Kundenauftrag. Nähere Daten und weitere Bilder erhalten Sie gerne auf Anfrage. Diese Beschreibung stellt kein verbindliches Angebot dar und kann Fehler beinhalten, keine Gewähr auf alle Angaben.

Condition: used, Year of construction: 2016, functionality: fully functional, Equipment: chip conveyor, X - 2,320 mm, Y - 1,980 mm, Z - 860 mm, with B, C, A axes, HF spindle, 7 kW, 12,000 - 40,000 rpm, max. 5.5 Nm. Sinumerik 840 D Pedpowvqmyjfx Aahjpu

Condition: good (used), Year of construction: 2011, Single-sided edge banding machine in right-hand configuration with workpiece return, for hot melt or/and PU gluing, used, manufactured in 2011; approx. 8700 operating hours Edge thickness: 0.4 – 10 mm Workpiece dimensions: Width min.: 70 mm Height min.: 8 mm Height max.: 60 mm Length min.: 150 mm Feed speed: 14 – 20 m/min, stepless Glue application: Glue application roller with Vario-melt metering system Working height: 900 mm Machine dimensions: Machine height: 1,600 mm Machine width: 1,100 mm Machine length: 8,200 mm Machine weight: 4,000 kg Machine equipped with: -Double roller pressure with electronic positioning -Pneumatic control of all units from the central touch screen control via Beckhoff industrial PC -CM – CombiMelt gluing system: Processing units: -Fk -JOINT PROCESSING UNIT for attaching chipboard with 2 HF motors, 2.2 kW, 200 Hz, 12000 rpm, operating in forward and reverse direction, length-controlled. Tool: DIA joint set Ø 85 x 45 x 30, z 3, for board thicknesses up to 42 mm -AKM – Edge magazine for the automatic feeding of strip edges, with spiked roller feed and pneumatic. pressure bar. Including optical edge monitoring -M4+1 – Four-fold magazine, automatic roller retraction. For holding four edge rolls. With variable edge shaft for interchangeable edge. With automatic selection menu. -K 13 – DOUBLE TRIMMING UNIT with 2 HF motors 0.6 kW, 200 Hz, 12000 rpm, motors and saw blades pneumatically adjustable 0/5° -K 160 2 HM saw blades 140 x 3.2 x 16 mm, Z 36 -Bfc – FLUSH TRIMMING UNIT for pre-trimming the glued edges in the reverse direction. Sensing on one side, feed via program control. 2 HF motors 0.7 kW, 200 Hz, 12,000 rpm Tool: 2 HM – reversible cutting heads Ø 70 x 20 x 16 mm, z 4 (HF70). -HFt – FINE TRIMMING UNIT for radius trimming of the glued edges in the reverse direction. Sensing on both sides, automatically adjusted to edge thickness via program control. With 2 HF motors 0.3 kW, 200 kW, 12,000 rpm Tool: 2 HM reversible cutting heads Ø 70 x 20 x 16 mm, Z 4 (HF70), can also be fitted with radius tools -HFt – FINE TRIMMING UNIT for radius trimming of the glued edges in the reverse direction. Sensing on both sides, automatically adjusted to edge thickness via program control. With 2 HF motors 0.3 kW, 200 kW, 12,000 rpm Tool: 2 HM radius reversible knife heads (AR 73), Ø 73 x 16 x 16, z 3 for reversible inserts R 1 – R 3. -AKF – Automated COPY MILLING with two separate working spindles for top and bottom. 2 HF motors 0.37 kW, 200 Hz, 12000 rpm Tool: 2 PCD diamond radius tools Ø 73 x 13 x Ø 16. With integrated extraction. -AZK 4 – autom. operated SCRAPE BLADE CHANGING UNIT -ZKf – SURFACE SCRAPE BLADE UNIT with fine sensing device for removing residual hot melt adhesive in the joint area – with extraction. Additional equipment: -AS – Antistatic spray device, double, on glue joint Pedpozb Iuqefx Aahspu -GS Lubricant spray device for spraying antistatic lubricant onto the edge surface, electronically controlled -RS – Cleaning set with 4-fold spray device and fine wiping device for cleaning the surface -KEO-c – EDGE CLEANING, oscillating and automatically adjustable. 2 motors 0.2 kW, with 2 cloth disks -WE – Angle insertion aid as a sliding carriage, foldable. For narrow parts. Interface for workpiece return Ligmatech ZHR 05 or comparable

Condition: excellent (used), Year of construction: 2018, operating hours: 15,418 h, functionality: fully functional, travel distance X-axis: 1,520 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 245 mm, rapid traverse X-axis: 22 m/min, rapid traverse Y-axis: 22 m/min, rapid traverse Z-axis: 22 m/min, feed length X-axis: 1,520 mm, feed length Y-axis: 1,150 mm, feed length Z-axis: 245 mm, feed rate X-axis: 22 m/min, feed rate Y-axis: 22 m/min, feed rate Z-axis: 22 m/min, controller manufacturer: Datron, controller model: Datron Next, workpiece length (max.): 1,500 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 200 mm, total height: 1,970 mm, total length: 2,420 mm, total width: 2,280 mm, table width: 1,000 mm, table length: 1,500 mm, rotational speed (max.): 40,000 rpm, overall weight: 2,500 kg, spindle speed (max.): 40,000 rpm, operating hours of spindle: 8 h, spindle motor power: 3,000 W, spindle nose: HSK-E25, number of spindles: 1, number of slots in tool magazine: 12, input voltage: 400 V, type of input current: three-phase, For sale is a Datron MLCube high-speed milling machine, *manufactured in 2018, in very good condition and fully operational*. The machine is currently in continuous production use and can be inspected and demonstrated under power by appointment. The absolute highlight of this offer is the *high-frequency spindle, which was recently replaced and has only 8.10 hours of runtime – practically a brand-new spindle*. The next scheduled machine maintenance is not due until after approximately 1,243 additional operating hours, saving the buyer immediate maintenance costs. The Datron MLCube combines the precision and rigidity of a vertical machining center with the agility and compact footprint of a gantry milling machine. With a machining area of 1,500 × 1,000 mm and a small footprint, it is ideal for large-format sheet metal processing. The modern Datron Next control system with a 24" touch display enables intuitive operation and quick setup times. *COMPLETE TECHNICAL DATA & EQUIPMENT* Manufacturer: Datron AG, Ober-Ramstadt Model: MLCube Year of manufacture: 2018 Condition: Very good – well-maintained, in continuous production Control system: Datron Next (24" Multi-Touch Display + Handheld Control Panel B10-2) Spindle: 3 kW HF spindle, HSK-E25, 40,000 rpm Spindle runtime (new spindle): 8.10 hours – practically brand new! Total machine runtime: 15,418.17 hours Next maintenance due in: 1,243.30 operating hours (interval: 2,000 h) Travel (X × Y × Z): 1,520 mm × 1,150 mm × 245 mm Machining area: 1,500 mm × 1,000 mm × 200 mm Feed rate / Rapid traverse: up to 22 m/min Tool changer: 12-position, HSK-E25 (expandable to 24 positions) Tool holder: Schunk Tribos collet chuck incl. clamping device Lubrication: Minimum Quantity Lubrication (MQL), 5-liter ethanol tank + 5-liter reserve tank Measuring technology: Renishaw 3D workpiece probe with camera Clamping system: Vacuum table incl. vacuum pump Machine table: Mineral casting (vibration-damping, thermally stable) Installation dimensions (W × D × H): 2,420 mm × 2,280 mm × 1,970 mm Weight: approx. 2,500 kg Power connection: 3 × 400 V, 50 Hz *AREAS OF APPLICATION* Electronics industry: Front panels, housings, membrane keyboards, PCB milling, test adapters Aerospace: Aluminum sheet and profile machining Advertising technology / Trade fair construction: Sign machining, profile machining Medical technology: Precision parts, fixtures Automotive supplier industry: Precision CNC machining Printing industry: Hot stamping dies, embossing tools General: Prototypes, contract manufacturing, aluminum, non-ferrous metals, plastics, composites *TERMS OF SALE* Pedpfxjzdrurj Aahjpu Price: 150,000 € net (plus 19% VAT) – fixed price New price of the machine: approx. 200,000 € Inspection: Under power – possible by appointment Dismantling / Transport: By the buyer (crane loading possible upon agreement) Invoice: A regular invoice will be issued Warranty: None (commercial sale with exclusion of liability for defects) Reason for sale: Strategic shift to steel machining – new purchase planned If you are interested or have any questions, please do not hesitate to contact us. Inspection under power is possible at any time by appointment. Ernst Neumärker GmbH & Co. KG Lohstraße 13 58675 Hemer

Condition: excellent (used), Year of construction: 2020, operating hours: 2,450 h, functionality: fully functional, cutting width (max.): 1,270 mm, cutting length (max.): 1,680 mm, type of input current: three-phase, cutting height (max.): 50 mm, Equipment: safety light barrier, ESKO Kongsberg X20 Light Sign (instalata in februarie 2020 si cu 2450 ore de functionare) - Working area 1680x1270 mm, Podpezdk Iwjfx Aahopu - Incl. basic X20 starter table, felt cutting underlay, shipping crates, - FlexiHead with 3 insert positions, - 6kW vacuum pump, PC & iPC Sign Standard, camera. - Table mains 230V - Pump mains 3 x 380 V - iCut Production Console software Tools : - Basic Folding Carton Kit - Multi Purpose High Frequency(MP-HF) Knife Tool (for cutting corrugate cardboard) - Folding carton crease tool (15mm) incl crease wheels - Crease Tool (60 mm for creasing corrugate cardboard) - Psaligraphy knife tool, incl. 2x SR6150 and 2x SR6151 blades - Rigid Material Knife tool (for 8mm knife blades) - KissCutting Knife tool (incl 6x sign foil knife bl) - Incl 2 different pressure springs; - Incl 3xKC101+3xKC102 knife blades; - Removable&adjust.depth control cup; - Hand tool for knife blade change

Condition: new, Year of construction: 2025, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edge banding in demanding workshops. The F 5 guarantees edge processing in all steps, as it is equipped with all the components you need for your requirements: jointing cutter, miter saw, milling unit, radius trimming blade, corner milling cutter, surface trimming blade, and finishing station. For even more flexibility on the way to the perfect finish, the F 5 can optionally be equipped with a practical multi-radius trimming blade. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and hot melt adhesive application to the workpiece for edge material up to 3 mm; jointing cutter (incl. diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with replaceable tank preparation incl. glue outlet device, HF miter saw station (approx. 12000 rpm), HF milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and replaceable blade milling cutter (combination version), corner rounding cutter, radius trimming blade, surface trimming blade (incl. pneumatic lift), finishing station, robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, extendable workpiece support, feed speed approx. 10 m/min. F5/08/4 quick-change preparation for corner milling cutter F5/08/5 additional replacement motor for corner milling cutter with tool set F5/09/4 multi-radius trimming blade (R1/R2) F5/24/1 spray device for release agent F5/24/2 spray device for cleaning agent F5/25 spray device for edge F5/27 nesting for milling cutter and radius trimming blade F5/30 pneumatic 3-point adjustment (radius, chamfer, flush milling) Pjdpfxolht Hwe Aahopu Location: Available from stock in 54634 Bitburg - available in week 4 -

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only attractively priced and space-saving. It also features the equipment you need to process edges perfectly from the start: diamond-tipped joining cutters guarantee excellently prepared workpieces for edge banding. The equipment includes a joining unit (up to 2 mm cutting depth), the top-mounted quick-heating glue tank, a mitre saw, and a combination milling machine. Optionally, the F 2 can also be equipped with a surface scraper blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Ppedpfx Aaelht Hzehju Equipment: F2 - 10 m/min Edge banding machine F2 next With PLC control (including touchscreen) and hot melt glue application to the workpiece for edge material up to 3 mm; joining cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank provision including glue outlet device, HF mitre saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination version), robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. F2/10 carriage F2/30 pneumatic 3-point adjustment (radius, bevel, flush milling)

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only affordable and space-saving, but it also boasts the features you need to process edges perfectly from the start: diamond-tipped joiner cutters guarantee excellently prepared workpieces for edgebanding. The equipment includes a joiner unit (up to 2 mm cutting depth), the top-mounted quick-heating glue container, a miter saw, and a combination router. Optionally, the F 2 can also be equipped with a surface scraping blade. Ppsdei Am U Dopfx Aahsu Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: F2 - 10 m/min Edgebanding machine F2 next With PLC control (including touchscreen) and hot-melt glue application to the workpiece for edge material up to 3 mm; joiner cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with replaceable tank preparation including glue dispensing device, high-frequency miter saw station (approx. 12,000 rpm), high-frequency router station (approx. 12,000 rpm) with separate pneumatic router adjustment and interchangeable blade router (combination design), robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment (radius, chamfer, flush trimming)

Condition: new, Year of construction: 2025, The Hebrock K 36 Top model with motorized adjustment - showroom model - new machine - - immediately available - This popular Hebrock model offers unparalleled possibilities. Developed for the highest standards, the K 36 stands for absolute reliability and productivity in daily use. By providing the option to equip the machine with a stepped milling cutter and a multi-radius draw knife, Hebrock sets new standards in the field of perfect edge processing for various edge thicknesses. Max. edge thickness: 3 mm Max. workpiece thickness: 60 mm Ready for operation in 6 minutes. Max. edge thickness: 3 mm Min./Max. workpiece thickness: 8 – 60 mm Min. workpiece length: approx. 140 mm Feed rate: approx. 15 m/min. Ready for operation: approx. 6 min. Max. power consumption: approx. 7.4 kW Electrical connection: 400 V – 3-phase – 50 Hz Work table height: approx. 900 mm Machine dimensions: approx. 5250 x 1230 x 1430 mm (L x W x H) Weight: 1750 kg Equipment: Hebrock K 36. - 15 m/min Edge banding machine K36 With PLC control (incl. 15'' touchscreen), hot melt adhesive application to the workpiece for edge material up to 3 mm; edge trimming cutter (incl. diamond tool) up to 3 mm cutting depth, maintenance-free, coated glue reservoir with replaceable reservoir preparation incl. glue outlet device, high-frequency double-motor trimming saw station (approx. 12000 rpm), high-frequency milling station (approx. 12000 rpm) with pneumatic milling adjustment and interchangeable milling cutter (combination version), corner rounding cutter, radius draw knife, flat draw knife (incl. pneumatic retracting device), finishing station, robust chain drive, ball-bearing double roller pressure, aggregate sight window from the rear of the machine and the operator side, signal lamp for workpiece sequence, extendable workpiece support, feed rate approx. 15 m/min, edge banding up to 60 mm workpiece thickness 36/08/1 Quick-change preparation for corner cutter 36/08/2/1 additional interchangeable motor for corner cutter R=1 Psdpfx Aaji Am Ukohepu 36/09/1 Multi-radius draw knife 36/24/1 Release agent spray device 36/24/2 Cleaning agent spray device 36/25. Protective spray for edge 36/27 Nesting (1 milling station + 1 radius draw knife) 36/30 Pneumatic 3-point adjustment 36/30/1 Multi-tool for high-frequency milling station (R2/R1/chamfer) 36/45 Axis package with motorized adjustment for panel, edge thickness and rabbet milling depth Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edge banding in demanding workshops. The F 5 guarantees edge processing in all steps, as it is equipped with all the components you need for your requirements: jointing cutter, miter saw, milling unit, radius scraper blade, corner cutter, surface scraper blade, finishing station. For even more flexibility on the way to the perfect finish, the F 5 can optionally be equipped with a practical multi-radius scraper blade. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Ppsdpfx Aasi Anadohsu Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and with hot melt adhesive application to the workpiece for edge material up to 3 mm; jointing cutter (incl. diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank preparation incl. glue outlet device, HF miter saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combined version), corner rounding cutter, radius scraper blade, surface scraper blade (incl. pneumatic lift), finishing station, robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change preparation for corner cutter F5/08/5 additional interchangeable motor for corner cutter with tool set F5/09/4 Multi-radius scraper blade (R1/R2) F5/24/1 Spray device for release agent F5/24/2 Spray device for cleaning agent F5/25 Spray device for edge F5/27 Nesting for cutter and radius scraper blade F5/30 Pneumatic 3-point adjustment (radius, chamfer, flush milling) Location: In stock, 54634 Bitburg Available in calendar week: 4/2024

Condition: used, Year of construction: 2000, grinding diameter 450 mm grinding length 1000 mm centre height 225 mm Photo outside of the machine of an already delivered one in similar scope. Other fotos from the origin machine. -major maintenance -New table geometry -partial painting of the interior grinding wheel equipment LEFT 400x63x127mm (standard) grinding wheel equipment RIGHT 300x40x127mm Internal grinding unit Ø120mm for HF spindles CNC control KELCO 120 C-axis for non-circular grinding. Kel-Poly B-AXIS: CNC-controlled B-axis KELCO 120: v constant 35m/s or 45m/s High-frequency internal grinding spindle Operating unit for MFV and MFZ spindles Hydraulic quill retraction for the tailstock Pjdpfxjxzk Nis Aahjpu NO micro-adjustment on the tailstock Spring-loaded quill insert Top table cooling Standard workpiece headstock MK 5 DIN 55026 size 5" Micro-adjustment for the standard workhead Dressing device on the lower table Active longitudinal positioning KELPOS, MARPOSS, mounted on the grinding head Tool measuring system KELSET, MARPOSS MARPOSS gate sensor Measuring control MARPOSS Minialsar prepared Paper belt filter

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping Ppsdpfx Aaoxcgtgshou - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Condition: new, Grinding spindle for Jung grinding machines, type JF 520, JF 415, and HF 50, new or refurbished. Pedpfx Ajzc Eukeahopu

Condition: excellent (used), -Dimensions: 962x1145x1392 mm -Belt dimensions: 735x3357 mm -Model: HF -Serial number: 19200246 -Year: 25/02/2019 Psdpfowx I Erjx Aahepu -With controls on the right -Production output: 1800 pieces/hour -Dough weight -min/max: 50/1800 g -Dough strokes per minute min/max: 0/30 -Two laminating rollers -Voltage: 400V -Power: 0.37 kW -Weight: 172 k

Condition: new, "New & Unused" A true collector's item for woodworkers: Scheppach HF 3000 spindle moulder in unused, mint condition! Here is a rare opportunity to purchase a legendary Scheppach HF 3000 spindle moulder in absolutely original, mint condition. The Scheppach HF 3000 is a robust, stationary spindle moulder designed for woodworking shops; it is primarily used in semi-professional DIY and trade settings. Technical specifications at a glance Spindle diameter: 30 mm (standard size for professional cutter heads) Spindle speed: Adjustable in steps (3,000 / 6,000 / 8,200 or 9,000 rpm) Max. tool diameter: 200 mm Spindle height adjustment: Up to 100 mm Weight: Approx. 120 kg (ensures low-vibration stability) Dust extraction port: 100 mm diameter (compatible with standard workshop extraction systems) You can find more items—both new and used—in our shop! Pedpfjzcqarox Aahjpu International shipping costs available upon request!

Year of construction: 2001, condition: used, machine/vehicle number: 1634, SECOND-HAND HF GENERATOR ELETTRONICA CAVALLO MOD. GAF 30 - CE RULES - Power 30kw Pjdpfx Aaezclmgehspu - S/N 1634 - Year 2001

Condition: used, empty load weight: 10,050 kg, maximum load weight: 25,950 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2007, loading space length: 13,315 mm, loading space width: 2,490 mm, loading space height: 2,240 mm, loading space volume: 74 m³, total length: 2,600 mm, total width: 4,000 mm, suspension: air, tire size: 385/65R22.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, tail-lift, Vehicle location: Bovenden, 3-axle, SAF axles, air-suspended, 1st axle liftable, last axle forced steered, lifting+lowering, ABS (anti-lock braking system), lashing strips, interior lighting, U-protection, lateral alu-running protection, supports, alu tail lift, upright, refrigeration unit diesel/electric. Pjdjvhh Rzspfx Aahopu Body: Schmitz refrigerated trailer approx. 74m³ with refrigeration unit Carrier MAXIMA 1300 and 2.5t tail lift MBB type 2500K 3x 9t SAF axle, disc brakes, hubodometer, lifting and lowering device, last axle forcibly steered via turntable, 1st axle liftable, LBW MBB HF 2500K, refrigeration unit Carrier Maxima 1300 ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: excellent (used), Year of construction: 2015, operating hours: 938 h, lifting height: 3,700 mm, fuel type: electric, mast type: duplex, fork length: 1,150 mm, total height: 2,240 mm, color: other, GVW: 2.245 kg Ppjdpfjzcg S Rex Aahsu Lifting capacity: 1.200 kg FUNCTIONS LIKE NEW! AC version, Powersteering, 220V HF-charger, Battery 24V 4PzS 620 2021 wit central filling system, Wheels 90%, Well maintained!

Condition: like new (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: U1060515116, Equipment: type plate available, Lincoln Electric Precision TIG 375 – TIG welding unit with water cooling (TEC ARC TC2000) For sale is a high-performance TIG welding unit, model Lincoln Electric Precision TIG 375, ideal for demanding welding applications in industrial environments. Technical highlights: - AC/DC TIG welding (ideal for steel, stainless steel, and aluminum) - Maximum welding current: up to 375 A - Mains voltage: 230 / 400 V - Frequency: 50/60 Hz - High-frequency ignition (HF) - Pulse function and extensive adjustment options - Foot pedal connection available Equipment: - Integrated TEC ARC TC2000 water cooling - Hose package / torch included - Robust chassis with casters - User-friendly control panel with precise regulation Condition: - Used, fully functional - Normal signs of use (see pictures) - Ready for immediate operation Special features: - Highly reliable industrial equipment from Lincoln Electric - Perfectly suited for workshops, metal construction, and production - High duty cycle for continuous operation Scope of delivery: Ppodpfey A Sgnjx Aahju - Welding machine - Cooling unit (water cooling) - Torch / hose package - Power cable If you are interested or have any questions, feel free to contact us. Viewing and test run possible by appointment.

Condition: used, Year of construction: 2011, functionality: limited functionality, VAT invoice. Used isel flatcom l CNC milling machine for precise material processing. The machine enables the execution of complex projects and components. Machine number 442776/1 X-axis: LES5 – 16×10 L=2190, Travel: 1900 (1600) mm Y-axis: 2x LES6 bevel gear – 16×10 L=1590 Travel: 1300 mm Z-axis: LES5 – 16x5 L=590, Travel: 300 mm A1: 2x RDH-M – 1:101, continuous rotation A2: 2x RDH-M – 1:101, continuous rotation HF ES 325 milling spindle Pedpfx Ajzcdaxsahspu The FlatCom L is equipped with a dual-axis rotary drive, enabling milling of parts from all sides. This allows for processing four parts in a single pass. An automatic, 16-position rotary tool changer ensures efficient tool change times. I have a video from 2012 showing the machine in operation when it was new. THE MACHINE IS NOT CONNECTED, AND THE BUYER DOES NOT HAVE THE POSSIBILITY TO START IT UP. Machine dimensions: Length 3250 mm Width 2300 mm Height 2600 mm Weight 1500 kg Automatic gate dimensions: Length 2400 mm Width 2000 mm Height 500 mm Weight 400 kg

Condition: used, mileage: 1,000 km, power: 30 kW (40.79 HP), first registration: 01/2003, fuel type: diesel, empty load weight: 1,250 kg, maximum load weight: 10 kg, overall weight: 1,260 kg, axle configuration: 4x4, brakes: other, driver cabin: other, gearing type: other, emission class: none, number of seats: 1, Year of construction: 2003, Equipment: all wheel drive, * German appliance * Dücker wood chipper type HF 960 * Condition see photos * Drive via PTO shaft * Suitable for all Unimog, tractors and other municipal vehicles * Hydraulic feed via chains and gear wheels * Drive via the PTO shaft * Wood diameter up to 240 mm * Chipping capacity up to 20m³/hour * Throwing range of the chipper up to 10 m * Engine power 70KW * Working pressure 200 bar * Discharge rotat. - and height adjustable * Large hopper 100x75 cm * Weight approx. 1.250 kg. * When selling to tradesmen and for export (non-EU and EU), the German merchant rules apply. If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. Ppsdpfovhp T Rox Aaheu All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, grinding length: 700 mm, grinding width: 450 mm, NEW ARRIVAL 1 used hydraulic surface grinding machine GEIBEL & HOTZ FS 6040 The grinding area of the G & H FS 6040 is 600 x 450 mm - Year 2000 - Machine with automatic program cycle - rough grinding - finish grinding - spark out - return to starting position. Machine with 2-axis digital readout - stainless steel coolant system - various flanges - fine pole pitch magnetic chuck - including flanges suitable for Jung HF/JF 520. Machine complete with operating manual and wiring diagram - fully tested for functionality. Very little used machine from a test department (original paint). Ppodpfx Asvz A Dcjaheu Pricing: ex stock, unpacked, uninsured, domestic sales plus VAT. Delivery time: immediate - subject to prior sale. Payment: as per usual trade terms - before collection - immediately after receipt of invoice. Best regards, Induba GmbH Mathias Becker

Condition: new, Code: N0235 Brand: CASADEI INDUSTRIA Model: E 350 PM Ppedpsyvt Exofx Aahju Automatic edge bander with hot melt (EVA) glue pot, chain panel feeding and pre-milling Maximum finishing quality Chain feeding system Pre-milling (E350PM) 3 free spaces for finishing units High performance 7 m/min feed speed 45 mm panel height 2 mm edge coils Minimum space occupied 2,30 m length Easy to use Unit settings with a piece of edge Easy and intuitive use of machine 3 position infeed fence 0-1-2 mm (according to edge thickness) Chain panel feeding Firm grip of panel guaranteed by special non-slip rubber on the pads. Linear feeding ensured by double sliding tracks with a special geometric profile accurately machined with precision to a hundredth of a millimetre. Long lasting monolithic frame fully processed only in one cycle on a CNC machining centre. Pressure bar with locking levers Top pressure bar with a double row of rubber wheels mounted on bearings, with locking levers and position indicator Pre-milling INVISIBLE GLUEING LINE DIAMOND tools Ø= 60mm H= 54mm HF motors 200 Hz – 12.000 rpm – 0.75 kW (each) Dedicated suction system and blower for panel cleaning before glueing Glueing unit PERFECT GLUEING, QUICK AND PRACTICAL SET-UPS 6 heating elements to guarantee uniform glue temperature. Motorized glue spreading roller with an internal electrical heating element. Inferior Teflon-coated glue pot to permit complete and rapid cleaning. Pneumatic shear, pressure rollers, edge feeding system DETAILS THAT MAKE THE DIFFERENCE Edge feeding synchronized with panel being processed Oscillatory movement of the cutting shear unit to guarantee perfect glueing Quick and precise positioning of the pressure rollers. The system “reads” the edge thickness, making mistakes impossible! Trimming cut-off PERFORMANCE AND VERSATILITY End trims front and rear excess edge Working cycle controlled by PLC Exclusion from control panel (PLC) Flush trimming unit Flush trimming unit with vertical disc copiers as standard Possibility of processing for edges from 0.4-2 mm Anti-adherence / release agent spraying unit (Opt.) INSTANT PERFECT CLEANING Spray function controlled by PLC 2 sprayers (lower and upper) and liquid tank Infrared lamp (Opt.) TO GUARANTEE THE BEST GLUEING CONDITION Creates the best conditions for perfect glueing Heats panels and removes all traces of dampness.