Used Hexagon 7-Axis Measuring Arm for sale (42,630)

Condition: excellent (used), Catalog number 6368 TECHNICAL DATA - max. width of workpiece 230mm - max. height of workpiece 130mm 7 spindles: 1) horizontal, lower 230mm, 5.5kW 2) vertical, right 130mm, 5.5kW 3) vertical, left 130mm, 5.5kW 4) horizontal, upper 230mm, 7.5kW 5) horizontal, upper 230mm, 11kW 6) horizontal, lower 230mm, 18.5kW 7) universal 230mm, adjustable at 360 degrees, 5.5kW - all spindles adjustable up/down, left/right - all spindles equipped with an electric brake - spindle diameter 40mm - spindles 4 and 5 adjustable electrically up/down - from above, 8 feed rollers, metal, twisting, including 2 double rollers - from above, 4 feed rollers, rubber - from above, 2 pressure rollers - from below, pawls - from below, on the side, 3 pressure rollers - from below, 2 metal rollers, smooth, feed rollers - from below, 2 double rollers, feed rollers, rubber - rollers pneumatically pressed - feed mechanism on cardan shafts - stepless feed speed adjustment 5-36m/min - feed motor 4kW - electric adjustment of planing thickness 0.75kW - length of infeed table 1980mm - enclosed in a cabinet - central lubrication of the table - dust extraction nozzle diameters 5x120mm, 2x150mm - dimensions (L/W/H) 5500x1840x1900mm - weight approximately 5000kg Pjdpfx Ajztzgiof Ssgt ADVANTAGES – Italian made – with 7 heads – for wet and dry wood – last spindle is universal – unpainted – used planer, very good condition Net price: 116900 PLN Net price: 27190 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary depending on exchange rate fluctuations)

Condition: new, The double-sided cantilever rack by BLT, with a height of 315 cm, is ideally suited for storing medium-weight long goods such as profiles, pipes, and bars in warehouses, workshops, or craft businesses. With an approximate rack length of 5.12 m, a usable depth of around 80 cm, and a total of 5 levels per side including the base level, this cantilever rack offers clearly arranged and easily accessible storage space for long and bulky items on both sides. Each cantilever arm can support up to 500 kg, and each upright can handle up to 1,800 kg per side. The bolt-on cantilever arms with deflectors ensure robust and practical use in day-to-day operations. Made in Germany. Freight within Germany already included, plus VAT. Product details: - Rack type: Double-sided cantilever rack - Height: approx. 315 cm - Length: approx. 5.12 m - Total depth: approx. 174 cm - Bay width: approx. 128 cm - Cantilever arms: approx. 80 cm usable length (IPE80) - Usable depth of base level: approx. 80 cm - Load per arm: max. 500 kg (with even load distribution) - Load per upright: max. 1,800 kg per side (without base level, with even load distribution) - Levels per side: base + 4 storage levels (5 levels per side total) - Design: Double-sided, bolt-on cantilever arms with deflectors - Upright profile: IPE140 - Cantilever arm profile: IPE80 - Colour finish: RAL 7016 - Manufacturing: Made in Germany - Delivery: Freight within Germany included, plus VAT Pgodpfoz Epmljx Af Sot Scope of delivery: - 5 × uprights made from IPE140, height approx. 3,150 mm - 40 × cantilever arms, approx. 80 cm length, made from IPE80 - Including mounting hardware - Including heavy-duty anchors for floor fixing Advantages of the BLT cantilever rack: - Ideal for storing medium-weight profiles, pipes, and bars - Double-sided design for storage space accessible from both sides - Bolt-on cantilever arms with deflectors - 5 levels per side, including base, for optimal use of storage space - Up to 500 kg load capacity per arm and up to 1,800 kg per upright per side - Secure floor anchoring with supplied heavy-duty anchors - Made in Germany - Freight within Germany included Delivery: - Freight within Germany included - Delivery includes mounting hardware - Secure floor anchoring with supplied heavy-duty anchors Enquiries & custom planning: Take advantage of our personal consultation for your individual storage solution. Inform us of your required dimensions, stored goods, and available space. Our experienced consultants are happy to provide you with a non-binding offer featuring custom planning and structural calculation for your bespoke cantilever racking system. Use our enquiry list or contact us directly by phone. Together, we will plan your tailor-made racking system.

Condition: used, Year of construction: 2013, HOMAG edge banding line with infeed and outfeed. The machine consists of the following components: Machine configuration: HOMAG edge banding line with infeed and outfeed Infeed table: HOMAG PROFI TBL100/20/25/F FlexLine Edge banding machine: HOMAG PROFI KAL330/7/A3/WZ Panel outfeed: HOMAG ZHR 30/L/125/F TECHNICAL DETAILS Panel length min.: 240 mm Panel length max.: 3,000 mm Panel width min.: 120 mm Panel width max.: 1,200 mm Panel thickness min.: 12 mm Panel thickness max.: 60 mm Edge thickness min.: 0.3 mm Edge thickness max.: 3 mm Pedpfsz En Axjx Af Segt Gluing system: EVA hot melt Number of processing units: 9 pcs. Number of units in the joining section: 1 pc. Number of units in the edge processing section: 7 pcs. Feed speed max.: 25 m/min Trimming unit Manufacturer / Model: S2 Motor power: 3 kW Speed: 9,000 rpm Automatic cycle adjustment: Yes End trimming unit Manufacturer / Model: HL 84 Number of motors: 2 pcs. Motor power: 0.4 kW Speed: 12,000 rpm Working speed max.: 25 m/min Flush trimming unit, top and bottom Manufacturer / Model: BF10 Number of motors: 2 pcs. Motor power: 0.55 kW Speed: 12,000 rpm Corner rounding unit Manufacturer / Model: FK 11 Number of motors: 2 pcs. Working speed max.: 25 m/min Profiling unit Number of motors: 1 pc. CNC positioning: Yes Automatic cycle adjustment: Yes Edge pulling unit Manufacturer / Model: PN20 Glue application unit Manufacturer / Model: FA 11 Scraping unit Manufacturer / Model: FA 11 Number of motors: 2 pcs. Feed speed, infeed max.: 40 m/min Feed speed, outfeed max.: 25 m/min EQUIPMENT FlexLine infeed table Pressure bar with rubber belt Panel stop Overpressure Edge heating lamps Edge magazine with 24 positions Hot melt glue tank Hot melt pre-melter Edge pressing roller unit with 3 pressure rollers CNC positioning of the pressure rollers Spraying device PowerTouch PC23 machine programming software Panel outfeed via transfer roller conveyor Panel transport via motorized conveyor belt Clamping feed system Panel outfeed system, left CE conformity The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External Reference: 7694

Condition: used, mileage: 176,339 km, power: 9,134 kW (12,418.77 HP), first registration: 03/2021, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x4, wheelbase: 6,400 mm, fuel: diesel, brakes: engine braking, color: other, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 8,980 mm, total width: 2,520 mm, Year of construction: 2021, Equipment: ABS, AdBlue, air conditioning, crane, cruise control, differential lock, electric window regulation, traction control, trailer coupling, = Additional options and accessories = - Lift axle - Air suspension - Fifth wheel coupling - PTO - Radio - Reversing camera - Sun visor - Toolbox = Notes = Crane: HMF 1943Z. High-level operation. Additional function for operating the container from the high-level platform. Bakker gripper 100 cm / 500 ltr. Hyva hook system. 26,000 kg. 540 cm. Distance from hook to bumper: 575 cm. Pgjdpfxoz Er S Ds Af Sjt Ringfeder hook: 40 mm. = Further information = Technical information Number of cylinders: 6 Axle configuration Brakes: Disc brakes Front axle: Tire size: 385/65R22.5; Steerable; Tire tread left: 60%; Tire tread right: 60%; Suspension: Leaf spring suspension Rear axle 1: Tire size: 315/80R22.5; Twin tires; Tire tread left inner: 60%; Tire tread left outer: 60%; Tire tread right inner: 60%; Tire tread right outer: 60%; Suspension: Air suspension Rear axle 2: Tire size: 315/80R22.5; Twin tires; Tire tread left inner: 70%; Tire tread left outer: 70%; Tire tread right inner: 70%; Tire tread right outer: 70%; Suspension: Air suspension Rear axle 3: Tire size: 385/65R22.5; Steerable; Tire tread left: 80%; Tire tread right: 80%; Suspension: Air suspension Weights Unladen weight: 16,180 kg Payload: 19,820 kg GVW: 36,000 kg Functional Crane: HMF Maintenance MOT (Technical Inspection): valid until 04.2027 Financial information Price: On request Identification Model number: TGS 35.430 8x4-4 BL / HOOK ARM + = Company information = ALL PRICES ARE NET FOR EXPORT (Joris Versteijnen NL-DE-GB; Wouter Greutink NL-DE-GB-ES-IT; Govorim po ryccki). We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: new, Year of construction: 2025, Ref. -No.: 10461 Manufacturer: IGREK Type: DT 4000 Year of construction: 2025 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 840D SL Storage location: Istanbul Country of origin: Türkiye Spindle Speeds: 4000 RPM Turning Height: 2000 mm Table Diameter: 4000 mm Spindle power: 37 kW Max. Table load: 40 t Rotate table rotation speed: 60 RPM Max. Turning diameter: 5000 mm Max. Turning height over faceplate: 2000 mm Max Spindle Torque: 1200 Nm Spindle Taper: ISO 50 Machine length: 7500 mm Machine width: 12000 mm Machine Height: 9500 mm Weight Of The Machine Ca.: 125 t Further information: Ram Slide Stroke: 2100 mm Ram Section: 350 x 350 mm Vertical Travel of the Moving Traverse: 2000 mm Table Drive System: Segmented Direct Drive Motors Table Torque: 8200 Nm - 14400 Nm max. Table Guide System: Hydrostatic Bearing and Guides IGREK DT 4000 – Your solution for precise heavy-duty machining The IGREK DT 4000 is a state-of-the-art CNC vertical turning center designed specifically for the precise machining of large components. Equipped with a 4,000 mm hydrostatic rotary table and a movable crossbeam, it enables the efficient machining of workpieces with a maximum turning diameter of 5,000 mm and a turning height of up to 2,000 mm. Key features: Hydrostatic rotary table: The 4,000 mm rotary table with hydrostatic bearing ensures maximum precision and smooth running when machining heavy workpieces. Movable crossbeam: The vertically movable crossbeam with a stroke of 2,000 mm offers flexibility and allows adaptation to different workpiece heights. Powerful spindle: With a spindle speed of up to 4,000 rpm and a power of 37 kW, the machine is designed for demanding machining tasks. High load capacity: The rotary table can accommodate workpieces weighing up to 40 tons, enabling the machining of large and heavy components. Pgsdpfoxmd Suex Af Sot Multifunctional machining: Thanks to the live spindle and the precise positioning of the C-axis, milling and drilling operations are possible in addition to turning, which increases the versatility of the machine. The IGREK DT 4000 combines advanced technology with high performance and flexibility to meet the requirements of modern manufacturing processes. Its robust construction and wide range of machining options make it the ideal solution for the precise machining of large components in various industries.

Condition: good (used), Year of construction: 2000, Ref. -No.: 10468 Manufacturer: DECKEL MAHO Type: DMU 80 Year of construction: 2000 Control: Heidenhain Millplus Storage location: Halberstadt Country of origin: Japan Machine-No.: 111xxxxx X-Travel: 800 mm Y-Travel: 700 mm Z-Travel: 600 mm Number of T-slots: 9 / 14 Clamping Area: Ø 900 x 630 mm T - slot spacing: 63 mm Tool Taper: SK 40 Tool changer: 30 Spindle Speed: 12.000 RPM Max. Torque: 2659 Nm Operating hours: 67.452 H Center hole: Ø 50 mm Holding torque: 4500 Nm Max. rotation of the table top: 10,7 rpm Feed: 3600 °/min. Resolution of the measuring system: 0,001 ° NC rotary table: 800 kg NC swivel rotary table: 600 kg Further information: - Clamping table 900 x 630 mm - Chip conveyor, sheet metal technology - Belt filter system, manufacturer Interlit - Type SK 200-760 - Oil mist separator - Set of tool holders, - Workbenches - 2x 6 drawers - Vise Pgjdpfxezc Dzio Af Set - Jaw width 125 mm - Roller shutter cabinet with 1 door The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2009, Ref. -No.: 10026 Manufacturer: SCHIESS Type: VMG4 MA90 Year of construction: 2009 Type of control: CNC-Steuerung Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Deutschland Turning Diameter: 5000 mm Turning Diameter Over Bed: 4000 mm Spindle Speeds: 0 - 120 RPM Clamping Diameter: 4000 mm Cross Travel: 420 x 340 mm Pgedozx Nw Tjpfx Af Set Max workpiece height: 3000 mm Main Drive: 52 kW Max. Tension: 120000 N Max. Payload: 50 t Power Capacity - Table: 110 kW Max torque faceplate: 100 kNm Further information: Automatic tool changer with 80 positions (AAC) Automatic attachment changer for 6 milling heads Live spindle C-axis table Travel of the Y-axis gantry columns Drilling and milling head (master head principle) Straight drilling and milling head GB-1B Renishaw RBP 60 touch probe Hand terminal Teleservice Internal and external coolant Operator cabin Chip conveyor SADDLE (X-AXIS): Horizontal movement from the center to the right side 4,800 mm Horizontal movement from the center to the left side 3,100 mm Vertical distance between the saddle rails 1,400 mm Speed / range 0 - 16,000 mm / min GANTRY TRAVEL (Y-AXIS): Gantry stroke 5,000 mm Feed 0 - 16,000 mm / min RAM (Z-AXIS): Maximum cutting force when turning 60 Kn Enter minimum bore 550 mm Guide length 1,600 mm Speed / feed range 0 - 16,000 mm/min Spindle speeds: Range 1 rpm Range 2 0 - 1,100 - 3,150 rpm Spindle torque: Range 1 2,400 - 2,400 - 850 Nm Range 2 450 - 450 - 160 kNm

Year of construction: 2023, condition: like new (used), functionality: fully functional, 4 axis CNC machining center FOM INDUSTRIE FNC 230, year 2023 Condition: excellent, as new Standard configuration: ▪ Electrospindle 5 kW, 18.000 rpm (ISO 30) ▪ 10 location tool magazine on Left of machine base ▪ No. 2 pairs of pneumatic vices with positioning through the travelling column ▪ Left retractable fixed pneumatic stop ▪ Minimum quantity lubrication (MQL) with pure oil ▪ Manual greasing device ▪ Chip and waste collection tank in base ▪ Perimeter guard system. Retractable front door with automatic opening ▪ Control equipment: POWER-I ▪ Movable control console ▪ Handheld control unit ▪ 24” Display ▪ Licence for FST CAM 4 program Option installed on the machine: ▪ PR205562 Tool length measurement and tool breakage detection device ▪ PR205563 X-FLOW (Automatic orientation of lubrication nozzles) ▪ PR205564 Pair of additional vice swith positioning through travelling column ▪ PR205921 SINGLE WORKING AREA 2 PIECES MACHINING WITH X PAL: - LED bar Pgsdpfx Ajz Ey Uaef Set - SW for profile positioning - SW to view machining cycle progress - Device to measure profile length PR205921 - ''Clock'' time calculation module program user license - Right pneumatic fixed stop - Tunnel for oversized profile machining - SW to manage oversized machining operations ▪ PR205571 Lubrocooling with minimum use of water-oil emulsion ▪ PR205574 Rear chip collection tanks ▪ PR205576 Horizontal blade assembly cone with blade Ø 150 mm  ▪ PR205577 Centralised automatic lubrication system ▪ PR202971 Wireless optical bar code and QR code reader, complete with software for importing data compatible with Fom protocol ▪ ZP713706 License module Statistics: version for CNC 4-axis. Software for collecting machine operation and productivity data

Condition: good (used), functionality: fully functional, Year of construction: 1995, operating hours: 3,754 h, load capacity: 7,000 kg, lifting height: 4,400 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,850 mm, gearing type: automatic, fork length: 1,500 mm, front tire type: superelastic tires (black), rear tire type: cushion tires (black), empty load weight: 8,630 kg, total height: 3,500 mm, total length: 3,600 mm, total width: 2,050 mm, maximum load weight: 7,000 kg, fuel: liquid petroleum gas (LPG), Equipment: cabin, lighting, pallet forks, In good condition. Pgsdpfx Afez Dwbus Set We sell forklifts that have undergone a complete service. Ready for the end user. We can arrange transport within Europe and worldwide.

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis Psdpfx Afouxfu Ne Sogt - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: good (used), TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: water-cooled -Length: 7 m -Connector: 5-pin -Transport dimensions: 380/380/H100 mm Pgedez Dtcujpfx Af Sst -Weight: 2.7 kg

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 7x-1245., overall weight: 10 kg, Equipment: documentation/manual, type plate available, Proliner 7x device, serial number 7x-1245. Condition: used, like new, complete set. Year of manufacture: November 2023. 1 owner. The device was used for measuring glass wall cladding. Includes tripod, template attachments, backpack, remote control, wheels for moving the device, 2 batteries, and a charger. Net price negotiable, call 795503436. Pgodpfez D Abtox Af Sst

Condition: good (used), mileage: 216,019 km, power: 338 kW (459.55 HP), first registration: 03/2018, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 6x2, wheelbase: 3,950 mm, fuel: diesel, brakes: retarder, color: black, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,950 mm, total width: 2,550 mm, total height: 3,500 mm, Year of construction: 2018, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, retarder, seat heater, traction control, trailer coupling, - Heated mirrors - Digital tachograph - Tachograph (recording device) - Fixed (set) - Halogen lamp - Short cab - Manual - Power take-off (PTO) - Pump - Radio/cassette - Reversing camera - Lane departure warning system - Seat cover - Central lubrication - Additional brake system Number of axles: 3, Configuration: 6x2, Kerb weight: 12,188 kg, Gross weight: 26,000 kg, Total fuel tank capacity: 260 liters, Trailer coupling, King pin diameter: 40 DIN, Fifth wheel: Fixed, Number of differentials: 1, Central lubrication, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Tachograph (recording device), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, Color: Anthracite, Heated mirrors, Reversing camera, Lighting: Halogen lamp, Lane departure warning system, Climate control, Heated seats, Bluetooth, Engine output: 338 kW (453 hp), Fuel: Diesel, Euro: 6, Transmission type: AS-Tronic, Gearbox: ZF, Gears: 12, Additional brake system, Retarder brand: Intarder, Power steering, ABS, ASR, Power take-off (PTO), PTO type: 1, Starter battery, System type: Meiller AK16, Pump, Central locking, Seating configuration: 1+1, Seat cover: Seat cover, Seat adjustment: Manual, Meiller AK 16 NT Gearbox Transmission: ZF, 12 gears, automatic Axle configuration Tyre size: 315/80R22.5 Brakes: Disc brakes Axle 1: Steering; Tyre tread left: 4 mm; Tyre tread right: 5 mm; Suspension: Leaf spring Axle 2: Lift axle; Steering; Tyre tread left: 11 mm; Tyre tread right: 10 mm; Suspension: Air suspension Axle 3: Twin tyres; Tyre tread left inside: 12 mm; Tyre tread left outside: 10 mm; Tyre tread right inside: 12 mm; Tyre tread right outside: 11 mm; Suspension: Air suspension Weights Unladen weight: 12,188 kg Payload: 13,812 kg GVW: 26,000 kg Functional Pump: Yes Condition Technical condition: good Visual condition: good Damages: none Number of keys: 4 Podpfx Aox E Ra Ssf Sjgt Financial Information Leasing price: €1,064 per month (default, 60 months); Please inquire for further information and conditions Identification Registration number: KLEYN1 Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range covers all European brands, years of manufacture, and price categories. Why buy at Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • Competitive pricing • Fair trading practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Skilled technical services • The security of “recognizable quality” • And more.... Please visit our website for special offers and the complete stock list: Leasing through Kleyn Trucks is possible in most European countries! Calculate your leasing rate quickly and request an offer on our website. Ask directly about our European warranty package.

Condition: new, Year of construction: 2015, functionality: fully functional, warranty duration: 12 months, input voltage: 230 V, measuring range X-axis: 57 mm, measuring range Y-axis: 41 mm, measuring range Z-axis: 30 mm, total width: 240 mm, total length: 330 mm, total height: 720 mm, HITEC - Measurement Technology QCM 570 Exhibition machine, as new condition Year of manufacture: 2015 Pgedpfx Ajyvur Tof Sjt (RRP €27,000.00) - For highly accurate, repeatable measurements of complex workpieces - Various telecentric lenses - Camera system: USB 3.0 / 5 Megapixels - Automatic part program recognition M3 Software: - 23″ touchscreen - Flexible probe library, tolerance and programming functions - Visual display of Pass/Fail results with trend indication - CAD export Measuring range / field of view: 57 x 42 mm Length measurement deviation: 4.5 µm + L/50 (L in mm) Camera system: USB 3.0 / 5 Megapixels Incident light: 4-segment LED ring light Transmitted light: LED Height adjustment: 30 mm The measuring system can be inspected at any time at the Chemnitz location.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Effective working width: 520 mm Pjdpfx Afjz Dw Alo Ssgt Diameter of the planing shaft: 120 mm Number of knives: 4 Approximate weight: 1012 kg.

Condition: excellent (used), Measuring stand Brand: Fischer Instrumentation Pedpfx Afswn E U Nj Segt (28635) Measuring table 80 x 80 mm Installation size 110 mm

Condition: excellent (used), Projector make: Baty Model: SM 20 E 220 volts 3 objectives: 10x, 20x, and 50x magnification Coordinate stage with Werth Digimy ZV 5 Digital readout, 2 axes Glass disc diameter: 510 mm Transport dimensions: Length: 1000 mm Pgsdpfx Ajxlzxiof Sot Width: 600 mm

Condition: excellent (used), Micrometer make Hommel Precision Measuring range 175 - 200 mm diameter (2852) Test gauge in wooden storage case Pgsdpfx Ajtt Nugjf Set

Condition: used, mileage: 775 km, power: 129 kW (175.39 HP), first registration: 05/2026, fuel type: diesel, empty load weight: 2,600 kg, maximum load weight: 2,600 kg, overall weight: 5,200 kg, tire size: 195/75 16C, tire condition: 100 %, axle configuration: 4x2, wheelbase: 4,350 mm, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, operating hours: 775 h, front tire size: 195/75 16C, rear tire size: 195/75 16C, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, parking heater, sliding door, soot filter, truck registration, Vehicle number for inquiries: 812701 Iveco, Daily * Year of manufacture: * ABS, Anti-lock Braking System * ESP * Power windows * Automatic climate control * Particle filter * Power steering * Auxiliary heater * Cruise control * Immobilizer Podpfsz D Aapsx Af Ssgt * Central locking * On-board computer * Double cab < 7.5 * Digital tachograph * Radio CD * Bluetooth * USB interface * Distance assist system * Airbag * Electric windows + mirrors * Remote central locking * AdBlue tank * Comfort suspension seat * MP3 interface * Multifunction steering wheel * Transmission type: Manual transmission * Suspension: Leaf spring * Gross vehicle weight: 5,200 kg * Unladen weight: 2,600 kg * Payload: 2,600 kg * Permissible total weight: 5,200 kg * Tire condition 1st axle: 100% - 100% - Tire size: 195/75 R16C * Tire condition 2nd axle: 100% - 100% - Tire size: 195/75 R16C * Wheelbase: 4350 mm * Tire sizes: 195/75 R16C Disclaimer: Subject to changes, prior sale, and errors. You can find more pictures and videos on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained specialists; we will be happy to advise you.

Year of construction: 2024, operating hours: 150 h, condition: like new (used), functionality: fully functional, X AXIS (longitudinal) (mm) 7,500 Y AXIS (transversal) (mm) 1,280 Z AXIS (vertical) (mm) 640 A AXIS (vertical-horizontal rotation of the head) -90° ÷ +90° C AXIS (rotation on the vertical axis of the head) 0° ÷ 360° H AXIS (jaw positioning) (TKE 955 HP) (mm) 6,600 P AXIS (jaw positioning) (TKE 955 HP) (mm) 6,600 Podpsz Dpdusfx Af Ssgt ELECTRIC SPINDLE Maximum power in S1 (kW) 11 Maximum power in S6 (60%) (kW) 13.5 Maximum speed (rpm) 24,000 Maximum torque in S6 (Nm) 10.7 Tool holder taper HSK – 63F Maximum blade diameter 400 mm

Condition: new, empty load weight: 3,780 kg, maximum load weight: 6,720 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 7,100 mm, loading space width: 2,480 mm, loading space height: 2,420 mm, loading space volume: 42 m³, suspension: air, tire size: 245/70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, tail-lift, BPW axles, Dautel or BÄR tail lift, load capacity 1,500 kg, 4 cylinders, aluminum platform 1,800 mm long, 2 roll-off safety devices, with own batteries and charging cable, side wall thickness approx. 17 mm, , Front with portal doors for through-loading with short drive-over plate, , 2 rows of combination lashing rails, 7 pairs of lashing eyes embedded in the floor, , Rental price from 720 ¤ per month, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Pgedpfx Asz E Eppsf Sot

Condition: excellent (used), For sale: WAGNER FCA 500 universal milling machine in very good technical condition. This machine features robust German construction and is equipped with a 3-axis digital readout (DRO), which significantly facilitates precise machining operations. The mill is ideally suited for tool shops, single-part production, as well as maintenance and service work. Technical specifications: • Manufacturer: WAGNER Maschinen • Model: FCA 500 • Year of manufacture: 2004 • SINO digital readout – 3 axes (X,Y,Z) • Spindle speeds up to 2000 rpm • Power supply: 380 V • Frequency: 50 Hz • Total power: 6.5 kW Equipment: Podoyrhb Sopfx Af Ssgt • Vertical milling head • SINO digital readout • Variable speed control • Large work table with T-slots The machine is complete, in good technical condition, and shows normal signs of use.

Condition: used, Year of construction: 2002, Technical details: x-travel: 505 mm y-travel: 405 mm z-travel: 405 mm measuring range X-axis: 505 mm measuring range Y-axis: 405 mm measuring range Z-axis: 405 mm compressed air: 0,4 MPa voltage: 100/120/220/240 V / Hz total power requirement: 700 Watt machine weight approx.: 0,5 t dimension machine xH: 1,1 x 1,1 x 2,185 m further features: -it is a linear measuring system with resolution 0.0001mm -measuring speed X/Y+Z-axes 430 mm/s Pedpfx Afou S Izcs Ssgt -acceleration X/Y+Z-axes 980 mm/s² -measuring table made of granite, size LxW: 638 x 860mm, with workpiece clamp -max. tool size height max. 545mm weight max. 180kg Equipment: -Measuring probe Renishaw TP200 -Computer Fujtsu - Siemens Scenic P; protection class IP30 -without measuring probe -Software available (USB Stick) *

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 50 h, MEKITurn KT660 x 1500 - conventional lathe with FAGOR iT30 measuring system. Precise conventional turning and solid machine construction. Demonstration machine, year of manufacture 2024, approximately 50 operating hours, and immediately available. TECHNICAL DATA Swing over bed: 660 mm Swing over cross slide: approx. 430 to 440 mm Swing over compound slide: approx. 820 to 845 mm Distance between centers: 1540 mm Center height: 330 mm Bed width: 400 mm Spindle bore: 105 mm Spindle nose: D1-11 Spindle speed: 15 to 1200 rpm Number of speed steps: 12 Main motor: 11 kW Tailstock quill: diameter 75 mm Quill travel: 160 mm Tailstock arbor: MK5 Machine weight: approx. 2580 kg EQUIPMENT Pedpoz E H Nqofx Af Sjgt FAGOR iT30 measuring system Cooling system Tailstock Steady rest 315 mm scroll chuck Safety devices German CE declaration of conformity, issued by the German importer PRICE AND LOCATION Special price on request, ex works 66706 Perl-Besch, Germany. Seller: 3M-Consulting SARL. Delivery, installation and commissioning at the customer's site possible for an additional charge. WARRANTY For Germany and Luxembourg: 6 months warranty from handover, including materials and labor. Travel costs are not included. Outside Germany and Luxembourg: 6 months warranty on materials from delivery. Labor and travel costs are not included. Technical specifications according to the present and confirmed data sheet.

Condition: used, Year of construction: 2001, 7-Axis Turning and Milling Center Manufacturer: OKUMA Type: MacTurn 50 Year of Construction: 2001 Control: OSP-U100L Spiral and Circular Interpolation Upper Turret HS ATC: X1 = 598 mm Z1 = 1,660 mm Y = 230 mm, +110 mm, -120 mm C = 360/0.001 B = 360/1, indexed Turning Diameter Max.: 610 mm Turning Length Z1 Min.: 1,500 mm Swinging Diameter: 610 mm Turning Diameter over Cross Slide: 580 mm Center Distance Approx.: 2,000 mm Tool Holders: BT50 Driven Tool Holders BT50 = 40 – 3000 rpm ATC Magazine 72 BT50 For Turning: ≈ 36 Driven Tool Holders: ≈ 36 Pjdpfx Asz D I Ifsf Ssgt Lower Turret V8: X2 = 200 mm Z2 = 1,045 mm Turning Diameter Max.: 380 mm Turning Length Z2 = 1,045 mm Swinging Diameter = 380 mm Tool Holders: VDI40 Turret: 8 positions VDI40 Spindle: Speed Range: 14 – 2800 rpm at 37 kW Chuck: D400mm Spindle Bore: 110 mm Spindle Nose: A2-11 Torque Approx.: 2,000 Nm Coolant System with 40 bar pressure New Screen New Panel Multiple BT50 Tool Holders Weight Approx.: 20 tons Space Required L/W/H: 8,000 x 3,500 x 3,500 mm 28926