Used Ginaf X6 5250 Cse 10X4Palfinger Haakarmsystem / Abr... for sale (2,342)

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: Lhjdjx A U Ncopfx Afajf • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: used, Year of construction: 1977, Manufacturer: BOSCH – STRUNCK Model : FKL A 06 Year: 1977 Type: Automatic filler Plunging filling heads Filling pumps per set: 6 units 1 group of pumps up to 100 ml 1 group of pumps up to 200 ml Piston stroke adjustment: mechanical Motor power: 0.37 kW Lsdpjx R Diwofx Afajhf Laminar flow Filling head storage system withclosed circuit for cleaning. Machine dimensions: 100 x 80 x 245 cm Video in running condition available

Condition: used, three-jaw chuck, three-jaw lathe chuck -Manufacturer: SCA Skand Chuckfabriks, precision three-jaw chuck chuck size Ø 230 mm Ljdpfx Asux Safjfashf -Jaws: individually and fully adjustable -Passage: Ø 66 mm -Bolt circle: Ø 193 mm / M12 -Dimensions: Ø 230 x 130 mm -Weight: 21.2 kg

Condition: used, three-jaw chuck, three-jaw lathe chuck -Manufacturer: SCA Skand Chuckfabriks, three-jaw chuck chuck size Ø 110 mm -Passage: Ø 25 mm -Bolt circle: mm -Dimensions: Ø 110 x 115 mm Lhodpjuypylsfx Afaef -Weight: 4.8 kg

Condition: used, Test pump, pressure test device, measuring device, pressure test pump -Manufacturer: Junginger, mobile extraction device -Pressure display: 40 bar -Dimensions: 790/480/H775 mm -Weight: 47 kg Lhsdpjfnaaisfx Afajf

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Manufacturer: Fabryka Przyrzadow, 3-piece soft top jaw set -Type: PUTm-M 200 -Width: 25 mm -Number: 5x jaw sets available Lodpfxshf Dzwe Afaehf -Price per piece -Dimensions carton: 80/90 / H75 mm -Total weight: 2.3 kg / set

Condition: excellent (used), functionality: fully functional, Complete Industrial Ammonia Refrigeration System (R717) A complete refrigeration system based on ammonia (R717) refrigerant, designed for industrial applications in food processing plants, cold stores, freezing facilities, and high-performance process installations. The installation includes compressor units, pressure vessels, heat exchangers, circulation pumps, and control panels. Main system components: Ammonia separator vessel Manufacturer: Retech Refrigeration Technologies A/S Type: PSH-0820 Number: 346601 Year of manufacture: 1994 Capacity: 1,092 l Design pressure: -1 / +22 bar Test pressure: 29 bar Refrigerant: R717 Equipment: 2 ammonia pumps Dimensions: 2,700 × 1,300 × 2,400 mm Condenser / Heat exchanger (Shell & Tube Condenser) Manufacturer: Sabroe Refrigeration Type: COSB 411904 Year of manufacture: 1994 Refrigerant: R717 Capacity: 134 / 61.9 l Dimensions: 2,500 × 800 × 2,300 mm Pressure vessel Manufacturer: Tortmans Capacity: 80 l Refrigerant: R717 Dimensions: 1,300 × 500 × 1,400 mm Intermediate cooler Manufacturer: Sabroe Refrigeration Type: DVEA 051411 Serial number: 92578 Year of manufacture: 1994 Max. working pressure: 26 bar Capacity: 340 / 10 l Refrigerant: R717 Dimensions: 1,000 × 800 × 2,300 mm Compressor unit (Sabroe skid): 2 × single-stage reciprocating compressor Sabroe Type: CMO 28 Serial numbers: 99008 / 99007 Year of manufacture: 1994 Capacity: 2 × 190 m³/h Pressure: 20 bar Refrigerant: R717 Sabroe separator Type: GHEA 0520 Serial number: 92419 Year of manufacture: 1994 Capacity: 600 l Alfa Laval heat exchangers: • M10-BWFDT – 37.2 l (year 1993) • M10-BWFGT – 67.4 l (year 1994) Overall skid dimensions: 3,700 × 2,500 × 2,050 mm Additional heat exchanger: Manufacturer: Alfa Laval Type: M10-BWFD Factory number: 30101-12952 Year of manufacture: 1995 Capacity: 104.0 l Design pressure: 25 bar Design temperature: 110°C Dimensions: 1,700 × 500 × 1,000 mm Grundfos circulation pumps (set): LP 80-125/124 – 50 m³/h (several units) LP 100-125/130 – 85 m³/h (2 units) LP 65-125/117 – 42 m³/h Lsdpfx Afjydqpvsajhf UPS 50-120 F – 3 × 400–415 V, 50 Hz Two-stage compressor: Manufacturer: Sabroe Refrigeration Type: TSMC 108 L Serial number: 99112 Year of manufacture: 1994 Refrigerant: R717 Capacity: LP – 276 m³/h Pressure: 18 bar Dimensions: 2,200 × 1,100 × 1,550 mm Control panels (3 units): 2 × panel with Siemens touchscreen – 1,200 × 500 × 2,200 mm Sabroe ammonia plant control cabinet – 2,000 × 500 × 2,300 mm Auxiliary cabinet – 800 × 300 × 800 mm

Condition: new, Sand Gravel Fabrication Plant: Essential Solution for Modern Construction Needs In the construction and infrastructure industry, high-quality sand and gravel are critical raw materials for creating concrete, asphalt, and other foundational elements. A Sand Gravel Fabrication Plant is the cornerstone of producing these materials efficiently and at scale. With advanced technology, versatility, and scalability, these plants cater to a wide range of projects, ensuring consistent quality and meeting the growing demand for construction materials. This article explores the general introduction, features, and applications of sand gravel fabrication plants, including both stationary and mobile systems. General Introduction to Sand Gravel Fabrication Plants Lhodpfx Ajvlwqljfasf A sand gravel fabrication plant is a specialized facility designed to process raw materials such as sand, gravel, and aggregates into construction-grade products. These plants combine various equipment, including crushers, screens, conveyors, washers, and storage units, to convert raw materials into ready-to-use aggregates. There are two primary types of sand gravel fabrication plants: Stationary Fabrication Plants: Fixed installations designed for high-capacity production. Ideal for large-scale operations and long-term projects. Mobile Sand Gravel Fabrication Plants: Portable systems that can be transported to different project sites. Perfect for temporary operations and projects in remote locations. Both types are equipped with advanced machinery and automation systems to ensure high efficiency, precision, and sustainability. Applications of Sand Gravel Fabrication Plants Sand gravel fabrication plants are indispensable across multiple industries due to their ability to produce high-quality aggregates. Key applications include: 1. Construction and Infrastructure Produces sand and gravel for concrete, asphalt, and base materials. Supports large-scale infrastructure projects such as highways, bridges, airports, and railways. 2. Residential and Commercial Development Supplies aggregates for building foundations, driveways, landscaping, and drainage systems. Plays a vital role in residential housing and commercial property construction. 3. Road Construction Provides high-quality crushed stones and sand for roadbeds, pavements, and highways. Ensures durability and longevity of road surfaces. 4. Mining and Quarrying Efficiently processes mined materials into usable aggregates. Enhances productivity in quarrying operations with optimized material handling systems. 5. Environmental Restoration Supplies aggregates for erosion control, land reclamation, and shoreline protection projects. Facilitates sustainable environmental rehabilitation efforts. 6. Recycling of Construction Waste Mobile sand gravel fabrication plants are ideal for recycling concrete and asphalt. Converts waste materials into usable aggregates, reducing landfill burden and promoting sustainability. Stationary vs. Mobile Sand Gravel Fabrication Plants Stationary Fabrication Plants Best For: Long-term, large-scale projects and industrial operations. Advantages: High-capacity production. Robust and durable structures. Advanced automation for minimal manual intervention.

Condition: used, Stainless Steel Horizontal Tank 310 HL – SIM Certified – Manufactured by Gelabot Manufacturer Gelabot S.A. 15, rue Ampère – 69680 Chassieu – France Type Horizontal stainless steel storage tank – on cradle or frame – certified for volume gauging Industrial Applications Storage of food-grade liquids (wine, juice, water, oil) or non-aggressive chemicals. Ideal for wineries, mobile tank farms, or intermediate storage in the food industry. Main Technical Specifications: Ljdpfx Aox Efixjfashf - Total overflow capacity: 310 hectolitres (31,000 litres) - Orientation: Horizontal - Material: Food-grade stainless steel - Gauging certificate: Official S.I.M. certificate no. R89-631 Measurement by: Bourgogne Mesurage à Façon – S.A.R.L. Fichet Jean-Luc - Designed for hygienic storage and easy cleaning - Total height with gauge marker: not specified (chassis dependent) 🧩 Machine Usage Large-capacity horizontal stainless tank for static or mobile use in food and beverage storage. Frequently used in wineries, wine cellars, or mobile processing units. The horizontal layout ensures low-profile installation and ease of access. ⚙️ Features / Differentiators Unlike vertical tanks, this horizontal design is better suited for confined-height areas or mobile setups. The SIM-certified volume guarantees legal accuracy, making it suitable for commercial use and regulatory compliance.

Condition: used, Year of construction: 1999, Technical details: Lhedpfx Afou Idl Sjajf x-travel: 690 mm y-travel: 400 mm z-travel: 550 mm B-axis (table): 360° mm control: Siemens 840 D number of spindle speeds: max. 15 000 U/min tool clamping: System nach DIN 69893 tool taper: HSK-A63 tool changer magazine: chain magazine: 12 places Stück traversing speed: x/y/z Axis: 40 total power requirement: 195 kW weight of the machine ca.: 13,0 t Traveling Column Milling Machine - the tool changing unit consist of 3 -NC axis and 1 NC- rotary table axis - ATC ( with magazine) - rotary table Type SKH-NC 4/029, diameter=460mm , table surface plate Ø 500 x20mm, revolution per minute max. 22 rpm - control panel SIEMENS - Spindel-Typ: DRF-WE-255-N-W-15-30, 15000 U/min., Spindelleistung = 30 kW - chip conveyor Make Knoll type 400K-3/280, ejection height 1150mm - cooling system for spindle make SCHIMBKE Type DK 80V, 3,36 kW i.D. *

Condition: used, Year of construction: 1978, Technical details: table surface area: 1970 x 400 mm distance between table/spindle: min./max. 150 / 250 mm rapid traverse: 1 / 2 m/min revolution per minute: Frässpindel: 112 ... 1400 / 12 step U/min milling spindle taper: DIN 2019 = Nr. 40 (SK40) axial adjustment: manuell = 150 mm quill feed: 0,012 / 0,025 / 0,05 mm/U feed range - horizontal: Frässchlitten: 8...100 / 12 step mm/min total power requirement: ca. 8,4 (10,5 kVA) kW machine weight approx.: 3000 kg dimension machine xH: 3,05 x 2,7 x 2,0 m wedge-groove milling machine Application: Milling of straight and helical grooves. Multiple groove milling with automatic program sequence. Further features: - distance spindle axis / lower edge counterholder: 55 mm - axial movement of the counter bearing sleeve 50 mm - milling carriage movement horizontal 1000 mm (automatic + manual by hand) and vertical 100 mm by hand + max. 5mm automatic/hydraulic Equipment: Ledpeu Ndhisfx Afaehf - chip container 470x300x300mm - 2x oil collecting basins (3200x1500x70 and 3200x800x60mm) - some accessories/tools *

Year of construction: 1984, condition: used, Technical details: material Ø max: 120 mm suitable for: Laborarbeiten feed:: Stufe 1: 0,05 Doppelhub mm feed:: Stufe 2: 0,1 Doppelhub mm Lhsdpfju Ng Sdsx Afajf air pressure - required: 5 - 6 bar Number of working hours: 2649 h connected load: 5 kVA machine length: 1200 mm machine width: 800 mm machine height: 1900 mm machine weight: ca. 850 kg Laboratory Test Grinding Machine - precision grinding machine for laboratory work (e.g., steel and ice samples for spectral analysis) - automatic grinding machine with electronic control (in electric cabinet) - automatic feeding of the grinding spindle - workpiece holder = electro-magnetic - 380V; 50Hz; 3 phases - pot grinding wheel Ø 200x 100mm and drill hole Ø 51mm - coolant device available *

Condition: used, Technical details: Lodpfju N D S Uox Afaehf weight of the machine ca.: 4,0 t machine dimensions LxWxH: 1,8 x 1,8 x 0,9 m Machine table with 5 indexing tables for multi-side machining Application: Multi-side machining of workpieces in circular transfer machines in one operation on 5 indexing tables with clamping devices. Design: Round, fixed body with 5 round tact tables, which are arranged in the shape of a pentagon, and a centrally mounted turntable. Description: Turntable center = type Pentagon, diagonal 830mm; swing diameter Ø 873mm, side length 513mm 5x rotary indexing table, as a regular pentagon on machine body, center circle Ø = 1280mm, table shape truncated square 380x380mm, clamping device via 4 pieces make Röhm truncated cone clamping devices and 1 central centering flange, 360 ° rotatable, workpiece Ø approx. 730mm Actuation / drive is hydraulic *

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 94884, total length: 1,100 mm, total width: 1,050 mm, total height: 680 mm, motor manufacturer: Sabroe, power: 803.6 kW (1,092.59 HP), volume flow: 954 m³/h, Refurbished Sabroe SAB 163 HF screw compressor for Freon with a displacement of 954 m³/h. Specifications Brand: Sabroe Model: SAB 163 HF Refrigerant: Freon Displacement: 954 m³/h Dimensions: 1100x1050x680 mm (LxWxH) Lhodpfx Aox A Sw Defasf Capacities: +0ºC/+40ºC – 803.6 kW -5ºC/+40ºC – 672.4 kW -10ºC/+40ºC – 558.3 kW -20ºC/+40ºC – 484.8 kW (Economizer) -30ºC/+40ºC – 329.6 kW (Economizer) -40ºC/+40ºC – 211.1 kW (Economizer)

Condition: reconditioned (used), Overhauled Sabroe SMC 116 S LP reciprocating compressor for Freon. Complete with a Schorch KN7250M-BB014-152 electric motor – 50/60 Hz – 90/103 kW – 1470/1770 RPM and Unisab RT-Control. The compressor has a displacement of 882 m³/h at 1460 RPM. Brand: Sabroe Type: SMC 116 S LP (Overhauled) Refrigerant: Freon Electromotor Specs: 50/60 Hz – 90/103 kW – 1470/1770 RPM - Unloaded start - Capacity control - Mounted on steel base frame Lodpoycv E Hefx Afaohf - Sight glass - Solenoid valve - Control panel m³/h: 882 Dimensions: 2680x1000x1370 mm (LxWxH)

Condition: reconditioned (used), Overhauled Sabroe SAB 128 HF MK1 screw compressor for Freon. This compressor can be delivered as either HM or HF version and comes fitted with Timken bearings. The compressor features a displacement of 365 m³/h. Brand: Sabroe Lodpfxjycvxgs Afashf Type: SAB 128 HF MK1 (Overhauled) Refrigerant: NH3 / Freon kW at +10ºC/+40ºC: 393.5 kW at 0ºC/+40ºC: 272.8 kW at -5ºC/+40ºC: 224.3 kW at -10ºC/+40ºC: 182.6 kW at -20ºC/+40ºC: 138.5 kW at -30ºC/+40ºC: 86.8 kW at -40ºC/+40ºC: 50.1

Condition: good (used), Year of construction: 1967, Overhead crane, crane, electric hoist, lifting device, motor winch, motor winch, tackle, winch, pulley system -Rated load: 500 kg Ljdpfx Afob A Hazeaehf -Lifting speeds: 1/3 m/min -Lifting height: 6 m -Double strand

Condition: like new (used), Year of construction: 2022, functionality: fully functional, total height: 2,500 mm, total width: 700 mm, load capacity: 750 kg, total length: 5,300 mm, number of shelf rows: 5, shelf length: 1,700 mm, For sale: Metal display rack for carpets, rugs, and curtains. The rack is new, with external dimensions 5300x2400x700 mm (LxHxW), color anthracite grey, RAL 7016. The sliding system operates on rollers and galvanized tubes, and carpets are held with spring clamps. One assembled module looks exactly as shown in the photos! The rack is stable and does not require floor anchoring. We provide an invoice with deductible VAT! Price plus VAT! Lhjdpfx Afow S Iqmsaof

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: SN #51572, Lamnea Bruk Vertical Spooler, exceptional condition, very little use, purchsed and trialled for a project. Supplied with 2 collapsible spools. Lodpfx Ajx R Uxvofashf Inspection at our works welcome. Full manual and manufacturers certification included.

Condition: good (used), Rung and miter punch, rung punch Lhjdpfoif Hurex Afajf -Manufacturer: Rammefabriken, mechanical corner punch -Intermediate dimension: 100 mm -Adjustment depth: 65 mm -Dimensions: 1700/600/H1080 mm -Weight: 118 kg

Condition: good (used), Code: 0252 Brand: MA BREVETTI Model: JUNIOR 275 Pneumatic double mitre saw for 45° + 45° cuts at both ends, in frames and mouldings of any shape and kind Technical data: Blade diameter mm 275 F30 Max cutting capacity: Width 70 mm - Height 90 mm Production rate approx. 700/800 cuts Motors n° 2 - 2 Hp each - rpm 2800 Power supply V.380/50 Operating pressure 6 bar Suction port diameter 100 mm Overall dimensions mm 850 x 700 x 1400 mm Lhodpfx Afox Au A Noaof Weight kg 265

Condition: good (used), Power: 16 KVA Lsdpfx Afehc Syzeaehf

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 156694, total length: 1,200 mm, total width: 850 mm, total height: 1,100 mm, motor manufacturer: Sabroe, volume flow: 339 m³/h, Used Sabroe SMC 106 S reciprocating compressor for Freon. Complete with pressure switches/gauges and sight glass. The compressor has a displacement of 339 m³/h. Specifications Brand: Sabroe Model: SMC 106 S Lhsdpfex Ap Nksx Afaef Refrigerant: Freon Displacement: 339 m³/h Year of manufacture: 2015 Weight: 925 kg Dimensions: 1200x850x1100 mm (LxWxH) Performance: (0ºC/+35ºC) – 308 kW (-10ºC/+35ºC) – 197 kW

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 2 h, functionality: fully functional, type of input current: three-phase, warranty duration: 12 months, product height (max.): 100 mm, space requirement height: 1,750 mm, space requirement length: 1,200 mm, input frequency: 50 Hz, workpiece weight (max.): 300 kg, Equipment: type plate available, Alpha Brush KS-WBM Sanding Machine, Texture Brushing Machine Lsdpfxew Avrho Afashf This machine gives surfaces, such as profile boards for facades or wall cladding, a noticeably more sophisticated and rustic look! With up to 400 mm working width and customizable configuration for both softwoods and hardwoods, this machine is a versatile tool for carpentry workshops, planing mills, or joineries. We offer not only the texture brushing machine itself, but also the appropriate extraction unit and a variety of brush heads to equip the machine, allowing you to achieve your desired effect on wooden surfaces. In addition to this sanding automaton, we also supply coating machines that allow you to stain or finish boards and panels in one step. Do you have questions? We are happy to advise you individually on your requirements.

Condition: not inspected (used), machine/vehicle number: 068-071/270, functionality: unexamined, stroke length: 280 mm, table width: 280 mm, table length: 280 mm, throat depth: 150 mm, distance table to ram: 355 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid requires timely collection between 28.07.2025 and 31.07.2025. TECHNICAL DETAILS Rated force: 3.15 Mp Operating pressure: 125 kp/cm² Upward speed: 100 mm/s Downward speed: 300 mm/s Ram stroke: 280 mm Throat: 150 mm Maximum distance between table and ram: 355 mm Lhsdpfowvh R Aex Afaef Table dimensions: 280 mm x 280 mm MACHINE DETAILS Dimensions: 750 mm x 630 mm x 1,700 mm Weight: 750 kg Connected load: 1.5 kW Rated current: 3.8 A Operating voltage: 380 V / 50 Hz