Used Freudenberg Fainject 2000 for sale (7,499)

Year of construction: 2014, condition: used, The burner was in operation in a steam boiler from 2014 to 2023. In 2023, the burner was replaced with a dual-fuel burner. The unit was operated under load five days a week, and at base load on Saturdays and Sundays. Since its removal, it has been stored in its packaging in a dry, temperature-controlled hall. Prodpfx Ahszwfyhjcsa Manufacturer / Type: Garioni Naval NG 2000 Boiler medium: Steam Boiler output: 736.0 kW Burner output: 800.0 kW Firebox resistance (mbar): 8.0 mbar Firebox diameter (mm): 734 mm Firebox length (mm): 3,400 mm Type of gas: Natural gas N Heating value Hi: 10.35 kWh/m3 Relative density d (air = 1): 0.600 Gas flow rate: 77.3 m3/h Flow pressure at shut-off valve (mbar): 40 mbar Installation height above sea level (m): max. 450 m

Condition: used, Parallel Lathe CAZENEUVE type HB 575 Between points: 2000 mm Prodpfx Ahozwfdmjcja Maxi Ø on bench: 575 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 51 mm Rotation: from 20 to 1600 RPM Turret TRIPAN 411 3-jaws chuck Ø 200 mm Spindle motor: 15 CV ThreadingsMetric + Whitworth Tailstock CM5 Lubricant tank Lubricant pump Supplied with 3 TRIPAN tool holders Voltage: 380 V Length: 3500 mm Width with tank: 1500 mm Total height: 1400 mm Weight: approx 3 T

Condition: used, Year of construction: 2000, Gathering machine / booklet making Theisen & Bonitz TB Sprint 314 flex HP with QSM 303 14 stations, manual feeder TB Sprint flex 314 HP Format (max.): 350 × 500 mm Stack height: up to 650 mm Performance: - Up to 3,300 cycles/hour in 1:1 operation - Up to 4,200 cycles/hour in 1:2 operation TB B303 QSM Stitch-fold-cutting unit Formats open max.: 35 x 50 cm Open formats min.: 6.5 x 15.5 cm Smallest brochure: 6.5 cm spine length x 4 cm with head-foot trimming: 10.5 cm spine length x 4 cm largest brochure: 35 cm spine length x 25 cm with head-foot trimming: 34.6 cm spine length x 4 cm Output: up to 3100 work cycles/h, depending on format and paper Psdpfx Ajzictpohcjra Front cutting device with upper/lower blade for cutting to 4 cm and sections larger than 1.5 cm, infinitely variable motorized format adjustment of the front cut with additional handwheel for fine adjustment, head and foot trimming of 3 - 20 mm each for approx. 120 pages of standard 80 g/m² paper

Condition: used, CNC Press Brake COLLY 502/A Numerical Command: CYBELEC type DNC 32 P-CM Capacity: Maxi length 2000 mm x 50 T Throat depth: 200 mm Distance between uprights: 1600 mm Back Gear Gauge 1 axe Defective cylinder Right cylinder joint to change Machine functional (only right cylinder joint to change) Voltage: 380 V Length: 2500 mm Depth: 2100 mm Total height: 2400 mm Weight: approx 4 T Prjdpfx Aozwcl Ushcja

Condition: used, mileage: 520,000 km, power: 114 kW (155.00 HP), first registration: 09/1995, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 08/2027, color: orange, gearing type: mechanical, number of seats: 3, loading space length: 3,800 mm, loading space width: 2,200 mm, loading space height: 400 mm, Equipment: ABS, * Listing/Vehicle No.: MTE35DK * Office: * WhatsApp: * Mobile: * E-mail: * Website: Rental of various trucks, tractor units, and trailers for short- or long-term hire. 7.5 t from €699.00 and 18 t from €1,xxx.00 per month, available at short notice! Contact us for details. 1x MAN L00 Three-way Tipper 10.153 * Year of manufacture: 09-1995 * Mileage: 5 km * Manual transmission * Leaf spring suspension (front/rear) * Site beacon * Trailer hitch * Payload: 3,190 kg * 3-seater * Loading length: 3.80 m, loading width: 2.00 m, loading height: 0.xx m * Tyres: 235/75 R17.5 * TÜV (roadworthy inspection) available on request for an additional charge! Net price – Trade-ins possible – Rental/Financing/Leasing brokerage available – Subject to change, prior sale, typographical errors, and mistakes! We deal exclusively in well-maintained German vehicles. Our services: All customs/export documentation, Euro 1 * Short-term number plates / 5 days Pjdpfjxvafisx Ahcera * Export number plates / 30 days * Vehicle delivery * Vehicle collection * Main inspection and safety check Our contact details and opening hours: Office: * WhatsApp: * Mobile: * E-mail: * Website: * Monday – Friday: 09:00 – 18:00 * Saturday: by appointment

Condition: used, Year of construction: 2000, Corrugated board press Manufacturer: Hüttenhölscher Year of manufacture: 2000 Technical data Voltage: 400 V Current: 32 A Frequency: 50 Hz Psdpjzuzvmefx Ahcjra Compressed air: 6 bar Note: The technical data and descriptions are a transcript of the order confirmation from that time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2019, Panel saw Podpfx Ajzuy Riohcora Manufacturer: Holzmann Model: K5-320VFP-2000 Year of manufacture: 2019 Technical data Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: used, Year of construction: 2000, - Cutting length: 3300 mm - Saw blade overhang: 125 mm - Main saw: 18 kW - Scoring saw: 2.2 kW Panel dividing saw Manufacturer: Holzma Type: HPL 23/X/33/22/30/L Year of manufacture: 2000 Technical specifications - Cutting length: 3300 mm - 3 air cushion tables - Lifting table: 3300 x 2200 mm - Saw blade overhang: 125 mm - Main saw: 18 kW - Scoring saw: 2.2 kW Predozuy A Sjpfx Ahcoa - CADMATIC control system - CADMATIC control system Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 1997, operating hours: 34,000 h, travel distance X-axis: 570 mm, travel distance Z-axis: 2,000 mm, number of axes: 2, Horizontal turning machine manufactured in 1997. This BOEHRINGER DUC 560/2000 features a maximum turning diameter of 570 mm and a turning length of 2000 mm. It includes an 8-position disc turret and a three-jaw chuck with a diameter of 200 mm. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER DUC 560/2000 machine we have for sale. Contact us for further details. - Main Drive: 19 kW- Machine Control: NUM / Keller/Plus (IBM Monitor setup)- Maximum Torque Duty Cycle: 60% / 100%- Torque: 1800 / 1400 Nm- Max Rapid Traverse (Longitudinal/Cross): 10 / 5 m/min- Tool Turret: 8-position disc turret, Sauter VDI 30- Chuck: Forkardt three-jaw chuck installed, diameter 200 mm- Included Accessories: Steady rest- Operational Status: Out of service since mid-2023 due to operator retirement- Operating Hours: Approx. 34,000 hours (single-shift operation/power-on time) Technical Specification Counter Spindle No Psdpfxjzuyqcj Ahcera Driven Tools No

Condition: used, Year of construction: 2000, Edge banding machine, single-sided Manufacturer: OTT Type: Pacific V 6-F Year of manufacture: 2000 Technical data: Edge thickness: 0.2 - 6 mm Workpiece thickness: 8 - 42 mm Workpiece width: min. 70 mm Workpiece length: min. 0 mm Feed speed: 12 m/min Electrical connection: 3 x 400 V, 50 Hz Extraction: 2 x 120 mm at 20 m/s Extraction capacity: m³/h Equipment, processing units: Edge trimming 2 x 1.5 kW, 12,000 rpm, 200 Hz two tool-controlled spindles Gluing unit Rapid heating tank with Melt-matic automatic edge magazine with optical monitoring for strip edges in fixed lengths Release agent spraying device Cutting unit 2 x 0.2 kW, 12,000 rpm, 200 Hz automatic pivoting 0 / 3 Flush trimming unit x 0.43 kW, 12,000 rpm, 200 Hz Radius trimming unit R2 - R5 2 x 0.3 kW, 12,000 rpm, 200 Hz 2 quick-change stations for trimming units Corner rounding trimming unit 2 x 0.3 kW, 12,000 rpm, 200 Hz Pjdpfx Ahezuyh Uscjra Scraper blade 2 x carbide scrapers Smoothing unit 2 x 0.2 kW, 2,800 rpm, 50 Hz Weight: 2,000 kg Note: The technical data and descriptions are copies of the order confirmation from that time. The information is provided for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: MC 0120, turning diameter over cross slide: 270 mm, spindle bore: 70 mm, turning diameter: 460 mm, turning diameter over bed slide: 460 mm, turning diameter over top slide: 270 mm, center height: 230 mm, turning length: 1,500 mm, feed length X-axis: 1,500 mm, total length: 3,045 mm, total width: 1,200 mm, total height: 1,450 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 60 rpm, type of input current: three-phase, overall weight: 2,700 kg, Colchester Mascot Gap Bed Lathe Model: Mascot 2000 Vari Speed Swing Over Bed: 460mm Swing In Gap: 730 x 216mm Distance Between Centres: 1500mm Spindle Speeds: 60-2000 RPM (variable) Spindle Bore: 76mm Motor: 11KW Machine With: 300mm 3 Jaw Chuck 600mm Face Plate Digital Readout Psdpfxezux Elj Ahcsra Quick Change Toolpost with Holders Dimensions: 3045 x 1200 x 1450mm high Weight: 2700 Kgs

Condition: used, functionality: fully functional, COMPLETE POWDER MIXING, WEIGHING & BAGGING PLANT – RUBERG / PAGLIERANI Complete industrial plant for mixing, weighing, conveying, and bagging of fine dry powders. The equipment is currently installed, FULLY OPERATIONAL, and available for inspection and demonstration in operation. The equipment is offered either AS A COMPLETE PACKAGE OR AS INDIVIDUAL MACHINES / SYSTEMS. The plant has been used for the processing and packaging of fine mineral powders. EQUIPMENT INCLUDED: RUBERG CM 2000 – 2,000 KG MIXING SYSTEM Manufacturer: Gebr. Ruberg GmbH & Co. KG, Germany Model: CM 2000 Batch capacity: approx. 2,000 kg Industrial batch mixer SEW main mixer drive: 37 kW Main mixer speed: 35 rpm 2 side rotor drives: 2 x 5.5 kW Side rotor speed: 720 rpm Georg Büttner weighing system Weighing range: 0–2,000 kg Resolution: 1 kg RUBERG bucket elevator Elevator capacity: approx. 17 t/h Available separately or as part of the complete plant. RUBERG CM-ZE 1000 2SR – 1,000 KG MIXING SYSTEM Manufacturer: Gebr. Ruberg GmbH & Co. KG, Germany Model: CM-ZE 1000 2SR Year of manufacture: 2001 Machine No.: 168 / 11013 Useful mixing volume: approx. 1,000 liters Total mixing chamber volume: approx. 1,300 liters Industrial batch mixer Main mixer drive: 15 kW Main mixer speed: 40 rpm 2 side rotor drives: 2 x 7.5 kW Side rotor speed: 1,455 rpm Georg Büttner weighing system Weighing range: 0–1,100 kg Resolution: 1 kg RUBERG bucket elevator Elevator capacity: approx. 10 t/h Pneumatically operated discharge system Discharge connection: DN 630 Filling connection: DN 175 Inspection connection: DN 150 Available separately or as part of the complete plant. PAGLIERANI TP35 WEIGHING & BAGGING MACHINE WITH ULTRASONIC SEALING Manufacturer: Paglierani S.r.l., Italy Model: TP35 Type: Weighing and bagging machine for valve sacks Number of filling spouts: 1 Application: Finely ground dry powders Main features: Single filling spout Horizontal-axis filling turbine Integrated weighing system Load cell Pneumatic bag support and clamping system Pneumatic product flow control Product feeding hopper Podpfx Ahszv S Tlocera Electrical control cabinet Pneumatic controls Conveyor arrangement Ultrasonic valve sack sealing system BRANSON ULTRASONIC SEALING UNIT Manufacturer: Branson Ultraschall / Emerson Technologies Model: Digital Compact 222 Serial No.: DAB 08102435 A The Paglierani TP35 is also available separately. CONDITION: Used – fully functional. All equipment is currently installed and can be inspected and demonstrated in operation by appointment. DOCUMENTATION: Technical documentation, operating manuals, and technical drawings are available for several components. Further photographs, documentation, and technical information are available upon request. SALE OPTIONS: The complete plant is offered as one package, but the individual RUBERG mixing systems and PAGLIERANI bagging system can also be purchased separately. Price for individual machines/systems: on request. Location: Greece Availability: Upon agreement Inspection and demonstration in operation: By appointment Dismantling, loading, and transport can be discussed separately.

Condition: excellent (used), Year of construction: 2010, WEINIG HYDROMAT 2000 WITH FLOATING VERTICAL SPINDLES OPPOSED FEED MOTOR 22 KW FEEDRATE MAX 100 M/MIN 300MM WIDE MOULDER 1ST SPINDLE BOTTOM 30 KW WITH COUNTER BEARING 2ND SPINDLE TOP 30 KW WITH COUNTER BEARING 3RD SPINDLE LEFT 22 KW OPPOSED 4TH SPINDLE RIGHT 22 KW OPPOSED VERTICAL SPINDLES FLOATING VERTICAL SPINDLES OPPOSED SPINDLES 6,000RPM WORKING WIDTH 300 MM PLANING HEIGHT 160 MM NUMBER OF SPINDLES 4 BOTTOM SPINDLES 1 SPINDLE DIAMETER 50 MM CONTINUOUSLY VARIABLE INVERTER DRIVE FEED FEED MOTOR 22 KW MAIN MOTOR POWER 30 KW SPINDLE(S) WITH COUNTERBEARING SEPERATE MOTOR PER SPINDLE MOTORIC ADJUSTMENT PROGRAMMABLE CONTROLLER INFEED TABLE LENGTH 700 MM TABLE ROLLERS DRIVEN LUBRICATION PUMP AUTOMATIC SHORT INFEED WITH 220MM TOP FEED ROLLERS CONFORMITY MARKING CE MARK TOTAL CONNECTION Podpfx Aszv S Aajhcera 126 KW

Condition: used, functionality: unexamined, Used MDS Aquamax 2000 microplate washer with MDS 96 wash head Manufacturer: MDS Analytical Technologies Model: Aquamax 2000 (AQ2K) Prodpfx Ahezv Srhocja Voltage: 100-240V, 1.75A (50/60Hz)

Condition: like new (used), Year of construction: 2019, load capacity: 1,200 kg, lifting height: 6,500 mm, construction height: 3,000 mm, operating hours: 1,874 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 312 Mast: P + F - 3F6500 Psdszv Rw Ajpfx Ahcjra ID: 25116.5772 Category: Used Mast: 3F Lowered height: 3000 mm Lifting height: 6500 mm Capacity: 1200 kg / 600 kg Platform height: 6500 mm Order picking height: 8100 mm Cabin width: 1400 mm Year: 2019 Operating hours: 1874 hours Battery: 48 V / 620 Ah Options: - Triplex mast - FFL - SPECIAL platform!!!! (L x W = 2000 x 1400 mm!!) - Guidance rollers on the safety gates – complete, LIKE NEW!!

Condition: used, Year of construction: 2021, operating hours: 5,048 h, functionality: fully functional, machine/vehicle number: 245467, ENGEL DUO 17060/2000 injection moulding machine with ENGEL Viper 60 robot (robot working area, conveyor belt) – year 2021 For sale: ENGEL DUO 17060/2000 injection moulding machine, year of manufacture 2021, in excellent technical condition. The machine has been regularly serviced and operated in stable production conditions. Podsycc N Sspfx Ahcjra Technical data and information: - Manufacturer: ENGEL - Model: DUO 17060/2000 - Clamping force: 2000T - Year of manufacture: 2021 - Operating hours: 5048 h - Type: two-platen injection moulding machine - Condition: very good, fully functional Additional equipment: - ENGEL Viper 60 robot – perfectly matched to the machine, ready for direct integration into a production line, robot working area, conveyor belt. Offer advantages: - Low number of operating hours - Modern, energy-efficient design - High process repeatability and precision - Complete package: injection moulding machine + robot, robot working area, conveyor belt Ready for immediate commissioning

Condition: used, Year of construction: 2008, Technical details: standard turning dia.: 200 turning length: max. 810 mm control: MSX-701 MAPPS III greates pass round over bed: 800 mm Max. distance between centres: 1130 mm max. turning diameter: 320 mm max. workpiecediameter: 300 mm bar material dia.: 65 mm Traverse X-Axis 1: 210 Traverse X-Axis 2: 210 mm Traverse X-Axis 3: 210 mm Traverse Y-Axis 1: 110 (+65/-45) mm Traverse Y-Axis 2: 110 (+45,/-65) mm Traverse Z-Axis 1: 300 mm Traverse Z-Axis 3: 300 mm Traverse Z-Axis 2: 810 mm Traverse B-Axis: 870 mm turning speed range - spindle: 5.000 1/min Number of spindle speed ranges: 2 . Prsdpfx Ahozd Su Escoa spindle nose: JIS A2-6 spindle bore: 73 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° turning speed range - spindle: 5.000 1/min spindle nose: JIS A2-6 spindle bore: 73 mm bar material dia. max: 65/52 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° Number of Turrets: 3 . Number of tool stations: 16 x 3=48 pos Schank height for square tool: 20 mm Diameter of boring bar: 32 mm turret changing time (4-stations): 0,18 sec Number of driven tools: 16 x 3=48 pos max. spindle speed driven tools: 6.000 U/min. Rotary tool machining ability: M16 / Ø16 . rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 20 m/min rapid traverse Z-axis: 50 m/min drive capacity - spindle motor: 25 / 22 kW power capacity - driven tools: 7,5 / 5,5 kW total power requirement: 92,7 kVA weight of the machine ca.: 9,4 t dimensions of the machine ca.: 4,0 x 2,8 x 2,4 m Accerories Chip conveyor Coolantsystem C-axis in main and sub spindle Y-axis 2 x part counter total counter tool setting Overhead partsgripper with conveyor belt. Spindle 1 Chuck SMW KNCS-N 210 / 52 mm Spindle 2 Collet Chuck Hainbuch Spanntop nova Kombi Axfix 65 Robot interface Lehmann Robot with parts belt for feeding and disposal CNC Turning- and Milling Center MORI SEIKI NZ 2000 T3Y2 The NZ2000 T3Y has 2 spindles and 3 turrets, and 2 turrets have the Y-axis function and built-in milling motors. This not only allows synchronized machining using 3 turrets, but also achieves heavy-duty cutting and high-speed machining using rotary tools thanks to the built-in motor turrets. For shaft parts loading and unloading there is a Lehmann Robot with conveyor belts for loading and unloading. The machine can also be sold without robot. *

Condition: used, Year of construction: 2011, Technical details: standard turning dia.: 200 turning length: max. 810 mm control: MSX-701 MAPPS IV greates pass round over bed: 800 mm Max. distance between centres: 1130 mm max. turning diameter: 320 mm max. workpiecediameter: 300 mm bar material dia.: 65 mm Traverse X-Axis 1: 210 Traverse X-Axis 2: 210 mm Traverse X-Axis 3: 210 mm Traverse Y-Axis 1: 110 (+65/-45) mm Traverse Y-Axis 2: 110 (+45,/-65) mm Traverse Z-Axis 1: 300 mm Traverse Z-Axis 3: 300 mm Traverse Z-Axis 2: 810 mm Traverse B-Axis: 870 mm turning speed range - spindle: 5.000 1/min Number of spindle speed ranges: 2 . spindle nose: JIS A2-6 spindle bore: 73 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° turning speed range - spindle: 5.000 1/min spindle nose: JIS A2-6 spindle bore: 73 mm bar material dia. max: 65/52 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° Number of Turrets: 3 . Number of tool stations: 16 x 3=48 pos Predpfxezk U Rpe Ahcsa Schank height for square tool: 20 mm Diameter of boring bar: 32 mm turret changing time (4-stations): 0,18 sec Number of driven tools: 16 x 3=48 pos max. spindle speed driven tools: 6.000 U/min. Rotary tool machining ability: M16 / Ø16 . rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 20 m/min rapid traverse Z-axis: 50 m/min drive capacity - spindle motor: 25 / 22 kW power capacity - driven tools: 7,5 / 5,5 kW total power requirement: 92,7 kVA weight of the machine ca.: 9,4 t dimensions of the machine ca.: 4,0 x 2,8 x 2,4 m Accerories Chip conveyor Coolantsystem C-axis in main and sub spindle part counter total counter tool setting Overhead partsgripper with conveyor belt. Spindle 1 Chuck SMW KNCS-N 210 / 52 mm Spindle 2 Collet Chuck Hainbuch Spanntop nova Kombi Axfix 65 Robot interface CNC Turning- and Milling Center MORI SEIKI NZ 2000 T3Y2 The NZ2000 T3Y has 2 spindles and 3 turrets, and 2 turrets have the Y-axis function and built-in milling motors. This not only allows synchronized machining using 3 turrets, but also achieves heavy-duty cutting and high-speed machining using rotary tools thanks to the built-in motor turrets. The robot cell has been diemanteled, it is now a stand alone machine. A bar feeder can be added. *

Condition: not inspected (used), Year of construction: 1995, functionality: limited functionality, HEBROCK Edge banding machine Euro 2000 Year of manufacture: 1995 Without jointing unit Podpfxjzv Eh Ne Ahcjra With undercarriage BRANDT Edge rounding machine FB 10 Year of manufacture: 1996 Both machines for €1,500.00

Condition: ready for operation (used), Facing lathe DP 2000 Chuck diameter 2000 mm Length 4500 mm 2 tool posts included with the machine Weight approx. 22 tons Podpfev Hx R Nex Ahcera Video of the machine in operation available!

Condition: good (used), Year of construction: 1998, 1 used ring and profile bending machine Manufacturer: Euring Type: CM 2000 Top 2 Year of manufacture: 1996 Solid round material: 30 mm Solid square material: 30 mm Flat steel: 50 x 10 mm Shaft diameter: 30 mm Working speed: 6.0 RPM Roller diameter - tools: 132 mm Total power requirement: 0.75 kW Machine weight: approx. 0.25 kg Space requirement: approx. 0.6 x 0.8 x 1.3 m Profile bending machine with: - 1 set of standard rollers Pedpfszv D E Tjx Ahcsra - 2 rollers are driven - Can be operated horizontally or vertically with foot switch

Condition: used, Used IKA model DR 2000/30 ATEX stainless steel Dispax-Reactor. Maximum flow rated 4,000 l/h, Maximum viscosity 5000mPas (product independent). Driven by approximately 58kw electric motor. Includes frequency inverter. Predjzun Ebspfx Ahcja

Condition: new, plate depth 2000 mm plate width 1500 mm plate height 300 mm weight 2385 kg dimensions of the machine ca. 2000 x 1500 x 300 mm GERD WOLFF clamping plate 2000 x 1500 x 300 mm If you cannot find the size you need, you can also send us an e-mail with the completed PDF form (attached). This way we can manufacture a clamping plate for you according to your requirements. T-slot size: 48 x 28 T-slot spacing: 300 Number of slots: 5 Psdoyk Ih Nopfx Ahcsra Edge distance: 150 Weight: 2385 kg Casting quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/II

Condition: new, plate depth 2000 mm plate width 1000 mm plate height 600 mm weight 1800 kg GERD WOLFF clamping cube 2000 x 1000 x 600 mm If you cannot find your desired size, simply send us an email with the completed PDF form. We can then provide you with a custom plate tailored to your requirements. T-slot size: 38 x 22 T-slot spacing: 140 Number of slots: 10 Edge distance: 80 Weight: 1800 kg Casting quality HT250 Prodpfjymf Uxjx Ahcja Flatness less than 0.12 mm Surface machined according to DIN 876/III Keywords: Clamping cube, Cubic clamping table, Multi-sided clamping, Angle clamping cube, Precision cube, CNC clamping cube, Clamping angle, Machine cube, 90-degree clamping device, Drilling cube, Modular clamping cube, Workpiece positioning, Mounting cube, Fixing cube, Clamping block

Condition: new, plate depth 4000 mm plate width 2000 mm plate height 600 mm weight 6700 kg GERD WOLFF clamping cube 4000 x 2000 x 600 mm If you cannot find your desired size, simply send us an email with the completed PDF form. We can then provide you with a custom plate tailored to your requirements. Pjdpfx Ahjymf I Eocera T-slot size: 52 x 28 T-slot spacing: 500 Number of grooves: 8 x 8 Edge distance: 250 Weight: 6700 kg Casting quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/II Keywords: Clamping cube, Cubic clamping table, Multi-sided clamping, Angle clamping cube, Precision cube, CNC clamping cube, Clamping angle, Machine cube, 90-degree clamping device, Drilling cube, Modular clamping cube, Workpiece positioning, Mounting cube, Fixing cube, Clamping block