Used Esterer = Ewd Ss 56 Oder Ss 71 for sale (11,236)

Condition: used, mileage: 15,072 km, power: 100 kW (135.96 HP), first registration: 04/2025, fuel type: electric, overall weight: 3,500 kg, color: white, gearing type: automatic, number of seats: 3, total length: 5,932 mm, total width: 2,020 mm, total height: 2,620 mm, loading space volume: 12 m³, loading space length: 3,372 mm, loading space width: 1,779 mm, loading space height: 1,966 mm, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, Internal No. 134.66-3 - AC charging 11 kW / DC charging 50 kW - High-voltage battery (56 kWh) - Parking package: reversing camera / PDC front and rear - Winter package: heated windshield washer nozzles and - heated driver's seat and front passenger double seat - electric auxiliary heater - cruise control - Smartphone integration (Apple CarPlay and Android Auto) can be retrofitted - Navigation can be retrofitted Ljdez Ez Smspfx Alboah - Package: Acoustics - Package: Load compartment package 2 - Exterior mirrors, electrically adjustable and heated - Exterior mirrors, electrically folding - Blind spot assist - Active lane keeping assist - Brake assist, active - ATTENTION ASSIST - Crosswind assist - Headlamp assist - Intelligent speed assist - Rain sensor - Digital radio DAB - Electric windows, front - Air conditioning, semi-automatic - Climate: pre-conditioning - Airbags, driver and front passenger side - Step on rear door - Parking brake, electric - Ceiling light in the load/passenger compartment - Entry handle on rear right corner pillar - Entry handle on rear left corner pillar - Speed limiter 120 km/h - Wooden floor in the load compartment - Interior trim of the load compartment up to roof height - Clothes hook in the driver's cab - LED light strip in the load compartment - Charging cable Mode 3 (Type 2, 3x32A) 8m - Marker lights, side - Tires: all-season tires - Rear door, two-wing opening on the side - Seats: armrest for driver's seat - Trim, rear wall - Lashing rails on the side wall on the bulkhead - WET WIPER SYSTEM - Heat-insulating glass all around with band filter - Additional locking mechanism for rear doors at 90 degrees - Battery: non-woven fabric battery 12 V / 70 Ah - Multi-function steering wheel - Storage compartment above windshield - Cable duct on rear portal - Cable duct on side wall - Steering wheel, adjustable in height, vertically and axially - Mercedes-Benz emergency call system - Navigation: navigation pre-installation - Pre-installation for Remote Services Plus - Pre-installation for Remote and Charging Services - Pre-installation for Remote and Navigation Services - Roof: high roof - Hill start assist - ESP - Adaptive ESP9i - Grab handle for entry for driver and front passenger - Retrofitting of trailer coupling possible - Chassis number: W1V3UBFZ3SP727820 1st owner, accident-free, no re-import (German vehicle), not a rental car, top condition, non-smoking vehicle, original service booklet maintained, trade-in of old vehicle possible, workshop-checked including warranty, Dekra used car condition report available upon request. We can deliver the vehicle, purchased locally, to your home address for a price of €0.50 / KM. The minimum cost is €150.00.

Year of construction: 2026, condition: new, Number of drawer 11 Stk. weight ca. 150 kg table surface area 1370 x 515 mm work height max. 1110 mm Ledpfoxaa Niex Albjah range L-W-H ca. 1380 x 550 x 1110 mm Manufacturer's recommended price approx. 8.000 euros Tool range: 390 pieces Special price on request!! Equipment: - mobile tool trolley including wooden worktop - robust and stable construction - aluminum drawer handles - 11x high-quality drawers - 9x drawers with equipment - including 390-piece tool range (!!) - Color = glossy green - 2x rigid castors / 2x steerable castors - including parking brake - central locking system

Condition: new, power: 125 kW (169.95 HP), fuel type: diesel, color: white, gearing type: automatic, number of seats: 23, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, 517 Sprinter Lord Comfort Lead Vehicle. Equipped with GSR3 system. Base vehicle: - 125 kW Euro 6e engine - 9-speed automatic transmission - Front air conditioning - Auxiliary heater - Driver's comfort seat with seat heating - Roof-mounted spotlights - Driver comfort package - Length 7336 mm - Rear-view camera and PDC front and rear (parking package) with front camera - Blind Spot Assist - Turning Assist - MBUX 10-inch (radio with Bluetooth, Apple CarPlay, touchscreen) Lsdez Skvqspfx Albsah - Tire pressure sensors - Attention Assist - Active Lane Keeping Assist - Traffic Sign Assist - Intelligent Speed Assist - Distance Assist - Rain sensor - Electric exterior mirrors - Cruise control Conversion: - Thermal and acoustic insulation - Rear extension by 500 mm, resulting in a total length of 7886 mm - Electric exterior swing door with recessed entry - 22 + 1 + 1 passenger seats / reclining seats - Total capacity 22 + tour guide + driver + optional reduction to 19 + 1 - Half podium - Recessed luggage compartment - Black VIP tinted windows (double glazing) - Convector heating in the passenger compartment - Roof hatch - Simple luggage rack on the left and right - USB ports at each row of seats - Webasto air conditioning in the passenger compartment (second compressor) - Interior lighting in the passenger compartment, white / orange - Curtains - Additional components painted in vehicle color Net export possible.

Condition: used, mileage: 15,411 km, power: 100 kW (135.96 HP), first registration: 02/2025, fuel type: electric, overall weight: 3,500 kg, color: white, gearing type: automatic, number of seats: 3, total length: 6,967 mm, total width: 2,020 mm, total height: 2,616 mm, loading space length: 4,300 mm, loading space width: 1,780 mm, loading space height: 1,940 mm, Year of construction: 2024, Equipment: ABS, central locking, electronic stability program (ESP), parking heater, No. 99 - You can find this and many other inspected Mercedes-Benz vans on our website: ----Mercedes-Benz eSprinter 314 L3H2, first owner, in very good overall condition. Includes a maintenance package, with the first service recently completed (09/2026) directly at Mercedes-Benz. New MOT (TÜV) - valid until 09/2028, also with 4 new tires (all-season). HV battery 56 kWh. Range approx. 233 km. The manufacturer's warranty is valid until 02/2027, and the Mercedes-Benz HV battery guarantee also applies (8 years or 160,000 km).----High-voltage battery (56 kWh), AC charging 11 kW, DC charging 115 kW, charging socket for electric vehicle Combo 2/Type 2.----Permissible total weight: 3500 kg Lasdez Ex Dyopfx Alboh Unladen weight: 2665 kg Payload: 845 kg Wheelbase: 4325 mm Cargo space L x W x H (approx. in cm) 430 x 178 x 194 VIN: W1V3UCFZ2SP785682 Warranty possible with surcharge 2 keys----Errors, changes and prior sale reserved Special equipment: Rear door (opening angle 270 degrees), wooden floor in the cargo area, charging cable (8.0 m) with Type 2 plug (32 A, Mode 3), charging power HV battery 115 kW (direct current DC), cargo space package 2, entry handle on rear pillar, left, entry handle on rear pillar, right, grab handles A-pillars, cargo space light LED, lashing rails in the cargo area - side wall on bulkhead, cable duct on rear portal, cable duct on side wall, rear wall paneling, lashing rails in the cargo area - side wall on roof frame Additional equipment: 3rd brake light, storage compartment above the windshield, storage compartment below the dashboard on the passenger side, adaptive brake light, airbag passenger side, airbag driver side, acoustic package, acoustic environmental protection (external sound), trailer coupling: electrical system for trailer socket, exterior mirrors electrically foldable, exterior mirrors electrically adjustable and heated, both, outside temperature display, DAB tuner (digital radio reception), roof light in the cargo area with door contact switch, automatic switching on for driving lights, entry handle for sliding door on cargo area partition, electric motor 100 kW (continuous 80 kW), driving assistance system: breakdown management, parking brake electric, speed limiter system 90 km/h, HV battery 56 kWh, body/superstructure: box high-roof standard, instrument cluster with color display, communication module (LTE) for digital services, charging power HV battery 11 kW (alternating current AC), cargo area partition continuous, steering wheel with multifunction, truck registration, marker lights on the side, Mercedes-Benz emergency call system, multimedia system MBUX (touchscreen 10.25"), wheelbase 4325 mm, sliding door cargo/passenger area right, seat belt system with warning system (passenger side), seat belt system with warning system (driver side), seat cover/upholstery: fabric, seats in the driver's cab: double passenger seat, seats in the driver's cab: driver's seat heated, seats in the driver's cab: driver's seat adjustable, step rear door, fleece battery 70 Ah, preparation for navigation system (for multimedia system MBUX), front axle reinforced, pre-equipment for Remote & Charging Services Premium, pre-equipment for Remote & Navigation Services, heat protection glazing (windshield with band filter at the top), permissible total weight 3.50 t, auxiliary heater (air) electric

Condition: used, Year of construction: 2023, operating hours: 272 h, fuel type: electric, power: 13 kW (17.68 HP), tire condition: 80 %, empty load weight: 3,094 kg, color: grey, mileage: 272 km, first registration: 06/2023, axle configuration: 2 axles, next inspection (TÜV): 11/2026, driver cabin: day cab, emission class: none, Equipment: cabin, sliding door, truck registration, Reference no. for inquiries: 40486 Still RX20-20P * Year of manufacture: 2023 * Enclosed cab * Power steering * Lift height: over 5000 mm * Overall height: 2001 - 5000 mm * Inspections: General (HU) / Emissions (AU) valid until 11/2026 * Unladen weight: 3,094 kg * Mast height: 2,850 mm * Maximum lift height: 6,880 mm * Free lift: 2,400 mm * Operating hours: 272.3 h * Fork length: 1,200 mm * Side shifter Disclaimer: Lajdpfxoydu Dqj Alboh Subject to prior sale, changes, and errors. Further photos and videos are available on our website. Our comprehensive service offering includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing solutions * Application for all (export) documentation * Procurement of export or customs license plates * Vehicle preparation: new tarpaulins, signage, paintwork, etc. * Professional loading and load securing * TÜV inspections, registration service * Delivery/transport of commercial vehicles Consult our trained specialist staff – we are happy to advise you.

Condition: excellent (used), functionality: fully functional, MAAG EXTREX 56 melt pump station with Kreyenborg K-SWE 101 screen changer Complete melt pump station consisting of a MAAG EXTREX 56 melt pump and a Kreyenborg K-SWE 101 twin-piston screen changer. The system has already been mechanically adapted, mounted on a common base frame, and is ready for immediate use. Scope of delivery: * MAAG EXTREX 56 melt pump * Drive unit including gearbox, cardan shaft, and motor * Complete heating system for the melt pump Lasdpfxszpw Sao Albsh * Kreyenborg K-SWE 101 twin-piston screen changer * Hydraulic unit * Manual switching via hand valve * Heating system for the screen changer * Completely mounted on a base frame * Connection box The system can be inspected and tested at our facility in Wuppertal at any time. On request, demonstrations or video calls are also possible. In addition, we have other melt pumps, screen changers, and various peripheral devices for extrusion systems in stock. We will gladly put together a suitable solution for you, tailored to your application.

Condition: used, Year of construction: 2008, Year: 2008 Condition: good  Lsdpfx Aozqatpslbsah Configuration: - Pile feeder with suction feeding head - Fully automatic setup of the feeder head and ball rail - Automatic buckle plate adjustment - Automatic folding roller adjustment - 4 buckle plates on the first folding unit - 2 knife folding units - Shingled delivery

Condition: good (used), Year of construction: 2007, ASSCON Systemtechnik VP1000-56 * PCB size: 500 × 600 mm * Maximum component height: 50 mm * Machine weight: 400 kg * Supply voltage: 400 V / 50 Hz (3/N/PE) * Connected power: 10 kW * Average power consumption: 3.5 kW * Standby power consumption: 1.9 kW * Compressed air supply: 5 bar, oil-free compressed air Laedpfxozqcmfs Albeh * Media consumption: approx. 2.5 m³/h * Galden® filling volume: 20–25 kg * Heat-up time: approx. 25 min * Machine dimensions (L × W × H): 1,430 × 1,385 × 1,350 mm * Loading/unloading height: 920 ± 20 mm * Cooling: Air/convection, open or closed cooling water circuit possible

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: M38L/7658, Offer Number: M38L/7658 Machinetype: pre-drawing machine Make: RMG Type: 56-0776-85 Constr. year: 1986 diameter range: 8 mm drawing speed: 19 m/min mild steel: 9,5 mm high tensile: 8 mm capstan diameter: 600 mm Ledpfx Alswi S R Tjbjah drawing power: 1400 kg Location: In our warehouse

Condition: used, mileage: 372,530 km, power: 315 kW (428.28 HP), first registration: 12/2016, fuel type: diesel, empty load weight: 10,885 kg, maximum load weight: 15,115 kg, overall weight: 26,000 kg, tire size: 315/70R22.5, axle configuration: 6x2, wheelbase: 4,000 mm, next inspection (TÜV): 08/2026, brakes: retarder, color: silver, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, loading space volume: 20 m³, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, navigation system, onboard computer, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, Mercedes PowerShift 3, company-owned, 1x comfort seat, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, navigation system, ABS (anti-lock braking system), traction control (ASR), retarder, PTO (power take-off), differential lock, fog lights, storage box, ADR equipment, fire extinguisher box, leaf/air suspension, liftable and steerable last axle, trailer coupling with air and electrical connections, aluminum tank, alloy wheels, underride protection, side aluminum side guard, 2 chambers, roof hatch, radio remote control, green emissions sticker. Wheelbase: 4000 mm. Superstructure: Esterer tank body with 2 chambers, approx. 20,020 liters (10,010 l / 10,010 l) & remote control, disc brakes on front and rear axles, top and bottom loading, tank truck with ADR for Class A III for heating oil/diesel, Tiger system, VOC, receipt printer, 2 chambers, lane departure and driver alert assistant, original new price approx. €280,000! ADR certificate valid until 08/2026! Calibrated metering system until 2026! Next tank inspection in 08/2028! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale and errors excepted! - . Laodpfxsyvhraj Alboh

Condition: used, Year of construction: 2023, operating hours: 482 h, lifting height: 4,900 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Bobcat D30NXS diesel forklift, year of manufacture: 12/2023, operating hours: only 482h!, rated load capacity: 3,000 kg, fork length: 1,200 mm, lift height: 4,900 mm, triplex mast, hydraulic side shift, engine: [45.6 kW/62 hp], weight: 4,901 kg, very good condition, fully operational and ready for immediate use! We are happy to provide a leasing or financing offer upon request. Mr. Mihm (Tel. ) will be glad to assist you. For more information, please visit our website. Subject to prior sale and errors excepted. Power steering, protective roof = Further information = Lifting capacity: 3,000 kg Laedpfsyxkucsx Alboh Closed height: 230 cm For more information, please contact Tobias Ebert.

Condition: used, Year of construction: 2018, machine/vehicle number: 1800603, total length: 2,485 mm, total height: 1,715 mm, total width: 1,245 mm, product height (max.): 240 mm, product length (max.): 600 mm, product width (max.): 400 mm, input voltage: 230 V, input current: 13 A, working height: 870 mm, width of welding knife: 600 mm, length of welding knife: 400 mm, passage height: 240 mm, overall weight: 763 kg, passage width: 400 mm, power: 3 kW (4.08 HP), film width: 700 mm, input frequency: 50 Hz, nominal power: 3 kW (4.08 HP), year of last overhaul: 2025, Equipment: documentation/manual, IMPORTANT NOTE – KNOWN WEAR AND TEAR: A conveyor belt (infeed/outfeed belt, part no. 400201) is worn. A quotation from the authorized service partner for material and labor amounts to €879.59 net. As an alternative, replacement can be carried out independently. We will provide interested parties with the repair quotation upon request. Minipack-Torre Pratika 56 MPE X1 – fully automatic L-bar sealer, year of manufacture 2018, serial no. 1800603. Sold directly by the end user. Fully automatic machine for shrink and film packaging. Schneider-Electric Magelis touchscreen with 256 storable recipes for format, temperature, and speed. SPECIFICATIONS - Output up to 3,600 units per hour - Sealing bar 600 × 400 mm - Product height up to 240 mm - Film: Polyolefin/PVC/OPP, 7–80 µ - Film roll up to Ø 300 × 700 mm - 230 V single-phase, 3 kW; no three-phase power or compressed air required - L × W × H: 2,485 × 1,245 × 1,715 mm - Weight: 763 kg - Schneider brushless servo drive, PLC logic, emergency stop, and safety features CONDITION AND MAINTENANCE Optically in very good condition. Lifetime counter: 36,415 packages, indicating moderate use. In May 2025, the welding wire, upper and lower rubber strips, and Teflon tape were replaced. Maintenance and repair documentation is available. Due to the aforementioned conveyor belt, the machine will be handed over in its current, transparently described condition; inspection and functional testing are explicitly desired. SCOPE OF DELIVERY - Machine with glass cover, Magelis touchscreen, safety features, and connection cable - At least one suitable film roll with a width of 600 mm - Possibly another remaining roll; the exact inventory will be checked before handover - Machine on four swivel casters - Original documents, including data sheet, order confirmation, and available maintenance and service correspondence LOCATION, TRANSPORT, AND HANDOVER Location: 18239 Satow, Mecklenburg-Vorpommern. Inspection and functional testing are possible by appointment. The buyer organizes and pays for collection or transport. If desired, we will assist in organizing a suitable freight or courier transport. Due to the weight of 763 kg, a suitable special pallet and packaging are required; the transport costs will be added to the purchase price. PRICE AND SALE - Fixed price: €6,900 net (€8,211 gross, including 19% VAT) - Commercial sale by Marko Strehk Einzelunternehmen Ledey Stuxspfx Albjah - Known wear and tear are fully listed above - The machine can be inspected and tested before handover - In the case of an intra-community supply, the tax requirements and proof will be checked in advance If interested, we will gladly send you the repair quotation and the available documents.

Condition: used, Year of construction: 2011, operating hours: 1,285 h, lifting height: 4,250 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Jungheinrich EFG 215 electric forklift, year of manufacture: 2011, battery: 47/2021, operating hours: only 1,285 h!, previous owner: German Armed Forces, rated load capacity: 1,500 kg, lift height: 4,250 mm, fork length: 1,200 mm, scales with printer, side shifter, triplex mast with full free lift, in good condition, immediately ready for operation. We are happy to provide you with a leasing or financing offer upon request. Mr. Mihm (tel.) will be pleased to assist you. For further information, please visit our website. Subject to prior sale and errors. Overhead guard = More information = Ljdpfx Aoy Ttg Djlbeah Lifting capacity: 1,500 kg Overall height: 200 cm Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 2017, operating hours: 4,168 h, lifting height: 4,250 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Jungheinrich EFG 215 electric forklift, year of manufacture: 2017, battery from week 32/2024, operating hours: only 4,168 hours! Previous owner: German Armed Forces. Rated load capacity: 1,500 kg. Lift height: 4,250 mm. Fork length: 1,000 mm. Sideshift, triplex mast with full free lift, in good condition and immediately ready for use. On request, we will be happy to provide you with a leasing or financing offer. Mr. Mihm (phone) will be pleased to assist you. Further information is available on our website. Subject to error and prior sale. Overhead guard = Further Information = Ledpfx Aloy Tth Iebjah Lifting capacity: 1,500 kg Overall height: 200 cm Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 2017, operating hours: 2,865 h, lifting height: 4,250 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Jungheinrich EFG 215 electric forklift, year of manufacture: 2017, hours: only 2,865 h, previous owner: German Armed Forces, rated load capacity: 1,500 kg, lift height: 4,250 mm, fork length: 1,200 mm, sideshift, triplex mast with full free lift, cabin with PVC door, battery dated 10/2017, in good condition, immediately ready for use. Leasing or financing options available upon request. Mr. Mihm (Tel.) will be happy to assist you. For more details, please visit our website. Subject to prior sale and errors excepted. Cabin, rental possible = Further information = Ledpoy Ttilsfx Albeah Lifting capacity: 1,500 kg Overall height: 198 cm Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 2016, operating hours: 1,212 h, lifting height: 4,300 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Still RX20-14 electric forklift, year of manufacture: 2016, operating hours: only 1,212 h! Previous owner: German Armed Forces, rated capacity: 1,400 kg, fork length: 1,200 mm, lifting height: 4,300 mm, triplex mast, hydraulic side shift, engine: [9 kW/12 HP], weight: 3,191 kg, in very good condition, immediately available for use. Power steering, cabin. We are happy to provide a leasing or financing offer upon request. Mr. Mihm (tel.) will be pleased to assist you. For further details, please visit our website. Subject to error and prior sale! Lsdpfjy Ttkcex Alboah = More information = Lifting capacity: 1,400 kg Overall height: 200 cm For more information, please contact Tobias Ebert.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 26007/1, Year of construction: 2017, operating hours: 12,920 h, load capacity: 8,000 kg, lifting height: 5,600 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 3,010 mm, motor manufacturer: DEUTZ, gearing type: hydrostat, front tire type: cushion tires (black), rear tire type: cushion tires (black), empty load weight: 13,090 kg, Equipment: UVV, air conditioning, cabin, clamp, lighting, seat heater, sideshift, Triplex mast with full free lift, overall height: 3010 mm, lift height: 5600 mm, load capacity: 8000 kg at load center 600 mm, fork positioner with new side shifter, new fork tines length: 2000 mm, road lighting according to StVO, LED work lights front and rear, full cabin with heating, air conditioning, front and rear camera, DEUTZ engine, double pedal foot control, 6x new SE tires, operating manual included. Technical condition at the time of sale: Forklift is fully overhauled! Major maintenance just carried out! Laodpfx Aloy Spmqobjh New UVV safety inspection completed without defects! Delivery: In perfect condition! 20 years of professional experience! INSPECTION AND TEST DRIVE: By appointment at any time during opening hours: Monday to Friday, 8:00 am - 6:00 pm. Saturday from 8:00 am - 1:00 pm. TRANSPORT: Low-loader or curtain side truck available at a reasonable price.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 12,004 h, load capacity: 8,000 kg, lifting height: 5,600 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 3,010 mm, motor manufacturer: DEUTZ, gearing type: hydrostat, fork length: 2,000 mm, front tire type: cushion tires (black), rear tire type: cushion tires (black), Equipment: UVV, air conditioning, cabin, clamp, lighting, seat heater, sideshift, Triplex mast with full free lift, overall height: 3010 mm, lifting height: 5600 mm, load capacity: 8000 kg at load center: 600 mm, new fork positioner with side shifter, new fork length: 2000 mm, road lighting according to STVO (German Road Traffic Regulations), LED work lights front and rear, full cabin with heating, air conditioning, camera front and rear, DEUTZ engine, foot control with dual pedals, 6 x SE tires, operating manual included. Technical condition at the time of sale: Forklift has been technically overhauled! Major service recently performed! UVV (Occupational Safety and Health) inspection passed without any deficiencies! Delivery: In perfect condition! 20 years of professional experience! INSPECTION AND TEST DRIVE: Available at any time during opening hours by appointment: Monday to Friday. From 8:00 AM to 6:00 PM. Saturday from 8:00 AM to 1:00 PM. Ljdpfezbvf Djx Albeah TRANSPORT: Low-loader or flatbed truck available at a reasonable price.

Condition: excellent (used), Year of construction: 1996, grinding width: 1,350 mm, power: 42 kW (57.10 HP), COSTA 71 CTT 1350 wide belt sanding machine, manufactured in 1996. Configuration: 1 hard rubber sanding roller. Lajdpeznvp Iofx Alboh 1 pneumatic pad. Air blow-off system. Working width: 1,350 mm. Pneumatic (compressed air) cleaning system for all units. Vacuum worktable with integrated fan. Construction: Designed for use in a production line with a fixed working height; the sanding units move while the workpiece remains at a constant level. 2 motors, total power: 42 kW.

Year of construction: 1990, condition: ready for operation (used), LIQUIDATION SALE – IMMEDIATE AVAILABILITY Laodpfxoz Sbw Ss Albeh Due to the closure of the production facility, we are offering for sale a HÄNDLE mixer and extrusion press, used in a ceramic production line. Price for the mixer and press: EUR 120,000 net, EXW, negotiable. Reasonable offers will be considered. Preference will be given to buyers who can complete the transaction and collect the equipment quickly. Equipment offered: HÄNDLE MDVG 920 B mixer, manufactured in 1990, weight 6,000 kg, power 30 kW HÄNDLE PZG 56 A/50 extrusion press, manufactured in 1990, weight 7,200 kg, power 90 kW, serial no. PZ 3098 Included: control cabinet two press heads with outlets: 24 × 39 and 32 × 45 The machines were fully operational until the plant shut down in December 2025. Wear parts (press screws, mixer paddles) were replaced in March 2025 and are in good condition. The equipment is characterized by robust construction, durability, and straightforward maintenance. It is available for inspection at the plant in Panoszów, Poland. The machines are available immediately. Quick completion of the transaction and prompt collection are preferred. Additional technical information and photographs are available upon request.

Condition: new, Year of construction: 2026, Threading unit OLED display LED lighting Continuous/normal drilling capacity (mm) - R1 30/35 mm - R2 27/32 mm Maximum threading capacity - R1 M30x3.5 - R2 M24x3 Spindle MK IV Drilling depth (mm) 160 Overhang (mm) 300 Column diameter (mm) 140 Usable table surface (W x D) (mm) 590 x 450 Speed display, digital Drilling depth display, digital Drilling depth stop with fine adjustment Table height adjustment with rack and pinion Spindle/table (mm) 150-700 Machine dimensions without control panel (mm) 610 x 900 x 1,980 mm Machine dimensions with control panel (mm) 670 x 1,100 x 2,200 mm Motor, three-phase, 400V with frequency converter (kW) 4.0 Spindle speeds, infinitely variable R1 (1-stage) 0-1000 1/min R2 (1-stage) 0-1600 1/min Manual feed Weight (kg) 400 Optional drilling package 6 (€ 910.00 plus VAT) - Vise [felix] 2.0 150 - Taper shank MK IV/B18 Laedpjd Su Agofx Alboh - Reducing sleeve MK IV/MK II - Reducing sleeve MK IV/MK III - Quick-change drill chuck B18 3-16 mm (accuracy 0.17 mm) Delivery in Germany, free of charge, including packaging! NOT THE RIGHT MACHINE? WE ALSO OFFER OTHER FLOTT PRODUCTS – ASK FOR A QUOTE! FLOTT SUPPORT PARTNER

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control POWER CONTROL Software CADmatic 4 Professional Outside Rollers table for pre-loading (mm 5600 x 2200) Lifting scissor table (mm) 5600 x 2200 Rear pusher with 13 clamps / grippers (1 x Power Concept / Twin Pusher) With clamps / grippers - RETENTION DEVICE FOR THIN PANELS (Minimum thickness 3 mm) Ljdpfezl S Nfjx Albjah Turning device (rotating unit) at 90° Max. cutting width (mm) 5600 - Useful stroke of the pushing system (mm) 5600 Max blade projection (mm) 130 Scoring Unit (max saw diameter / power) mm 200 / Kw 2,2 Main Sawing Unit (max saw diameter / power) mm 480 / Kw 30 Adjustable speed of the saw carriage (m/min) 1 - 150 N° 5 Front supporting tables with Air blowing system OPTION: Printer for labels - PICA

Condition: excellent (used), Numerical Control Power Control + Software Cadmatic 4 Professional No. 1 Infeed roller tracks (ca.) 32,000 mm Lifting table (mm) 5600 x 2200 VAC loader (sliding bridge) with fan suction for loading special or delicate panels 1° Rear-pusher, with No. 6 clamps/grippers Turning device (rotating unit) at 90° 1° Panel Saw - Max cutting width mm 5600 (cutting line with air cushion) Max blade projection (mm) 190 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 600 ( Kw 36) Adjustable speed of the saw carriage (QS) (m/min) 1 - 130 m/min 2° Rear-pusher, with No. 14 clamps/grippers 2° Panel Saw - Max cutting width mm 2200 (cutting line with air cushion) Max blade projection (mm) 190 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 600 (Kw 36) Adjustable speed of the saw carriage (QS) (m/min) 1 - 130 m/min Waste evacuation system with grinder (Kw 19.5) No. 2 Front supporting tables with Air blowing system (mm 800 x 2160) Plastic wheels coated with special material to avoid scratching delicate panels Automatic unloading System of the cut panels: N° 2 x Liftomat HAU-A 25/12 Lasdpevnq H Eefx Albeh Automatic Stacking System with 8 stations

Year of construction: 1998, condition: ready for operation (used), A complete sawmill including all peripheral equipment and conveyor units is available. 1) Log yard: Baljer & Zembrod Asterix sorting carriage, year of manufacture: 1998, operating hours: 16382h, rail system type: double-T-beam, rail system length: 66m, cross conveyor dimensions X/Y: 7300mm/3300mm, log train length: approx. 40m. Including cut-off table with scraper conveyor. The running rails of the rail system were renewed approx. 5 years ago. 2) Sawmill: 2.1) Linck U71 frame saw in reinforced design with larger main bearing and a general overhaul carried out in 1995. 2.2) Linck VAK carriage. Linck Vy auxiliary carriage in heavier-duty design. 2.3) Möhringer butt log reducer. 2.4) Linck splitter wedge. 2.5) 2x Diemer edging saw units, passage width: 500mm. 2.6) Dankert band saw, wheel diameter: 1200mm. 2.7) Hydraulic log carriages with 3 clamping supports, cutting length range: approx. 1800mm-5000mm. 2.8) Various roller conveyors. 2.9) Various cross conveyors, vibration troughs, etc. 3) Saw service room: 3.1) Albert sharpening machine with flank grinding for band saws. 3.2) Oppliger straightening machine for band saws. 3.3) Rolling bench for band saws. 3.4) Vollmer CNE sharpening machine for circular saws. 3.5) Meinert manual setting machine for circular saws. 4) 2x Hildebrand Brunner drying chambers, volume: approx. 30m³-60m³. 5) Schmid wood chip heating system, year of manufacture: 1995, heating output: 450kW. 6) Manitou rough-terrain forklift. 7) Lewecke vacuum lifting machine. This is a complete sawmill. Documentation available. An on-site inspection is possible. Ljdpfxezf Nbxe Albsah

Year of construction: 2006, condition: ready for operation (used), Two Heidelberg folding systems are available. 1) Stahlfolder Heidelberg 56 system, year of manufacture: 2006, flat pile feeder: FFH-56, min. sheet dimensions X/Y: 140mm/1800mm, max. sheet dimensions X/Y: 560mm/900mm, paper weight range: 40g-250g/m², max. stack height: 800mm, max. throughput capacity: approx. 200m/min, buckle plate station: BUH-56, working width: 560mm, folding roller diameter: 44mm. 2) Stahlfolder Heidelberg 66 system, year of manufacture: 2006, min. sheet dimensions X/Y: 140mm/180mm, max. sheet dimensions X/Y: 660mm/1040mm, paper weight range: 40g-250g/m², max. stack height: 1200mm, throughput capacity: approx. 200m/min, working width: 660mm, folding roller diameter: 44mm. Documentation available. On-site inspection is possible. Ledpfsyddzxex Albjah