Used Electric Clamps for sale (37,967)

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Heavy-duty transport trolley for weights up to 35 tons. The transporter is supported by four pivoting heavy-duty wheels and two omnidirectional drive wheels (--> in any desired direction). The drive wheels are pneumatically pressed onto the ground to achieve optimal traction. By rotating the two drive wheels, the various drive modes of the transporter are activated. This creates a very flexible transporter that can move longitudinally, laterally, and rotate on the spot. The transporter integrates a 35-ton lifting table, the contact surfaces of which are equipped with heat sinks to dissipate the heat emitted by the pallet (during the transport of warm/hot material). The lifting system is driven by a central motor, and the power transmission takes place via two gearboxes and axles that run through the frame. These axles drive 4 shafts at the corners of the transporter. Depending on the transport goods, a device can be constructed that is supported by the lifting system. The entire system is protected by aluminum covers, each of which is numbered so that it can be easily reattached in the correct position after maintenance. The transporters are designed to move a maximum load of 35 tons with a maximum speed of 1.5 km/h in manual mode and 1 km/h in semi-automatic mode. The speed can be adjusted continuously via the manual control with joysticks. Without a load and in manual mode, the transporter can reach 2.5 km/h; in semi-automatic mode, the speed is limited to 1.5 km/h. Control: SIEMENS SIMATIC Operation: Radio remote control Lhodpfxsxa Ends Aiish Drive: Battery-powered Dimensions approx. 3600 x 2500 x 800 mm

Condition: good (used), Year of construction: 2018, operating hours: 251 h, load capacity: 1,000 kg, lifting height: 2,024 mm, fuel type: electric, mast type: duplex, construction height: 1,565 mm, empty load weight: 750 kg, mileage: 251 km, Electric pallet stacker Brand: Still (Germany) Year of manufacture: 2018 Load capacity: 1,000 kg Lifting height: 2,024 mm Mast retracted height: 1,565 mm Hours: 251 Battery included, with charger Lodpfey Sm Rtox Aiiehh Video to follow

Condition: excellent (used), Year of construction: 2020, VETTER P300 PROFI Crane System Two-rail portal crane with crane bridge and electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: P300 PROFI Crane System Year of manufacture: 2020 Machine type: Two-rail portal crane / workshop crane Description For sale is a used VETTER PROFI crane system, type P300, in a robust two-rail portal design with crane bridge, manual trolley, and electric chain hoist. The system was designed for industrial workshop operation and is ideally suited for assembly, production, mechanical engineering, maintenance, logistics, and material handling. The design complies with the crane classification HC2 / S2 according to EN 15011 and has a load capacity of 1,600 kg. Documentation, test book, and conformity documents are available. Technical data of the crane system Manufacturer: Vetter Krantechnik GmbH Type: P300 Year of manufacture: 2020 Load capacity: 1,600 kg Crane classification: HC2 / S2 according to EN 15011 Operating mode: Workshop crane Control: Floor control Mounting: Composite anchor system Span: 5,100 mm Support spacing L: 5,590 mm Support spacing B: 5,100 mm Overall dimensions of the system: approx. 6,040 x 5,800 mm Beam length: 6,170 mm Bottom flange of crane bridge: 4,145 mm Bottom flange of portal beam: 4,567 mm Overall height: 4,905 mm Operating voltage: 400 V / 50 Hz Control voltage: 24 V Max. permissible hoist weight: 85 kg Steel structure group: 18/36/30 Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of manufacture: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Lifting motor power: 1.50 / 0.37 kW Drive group: FEM 2m / M5 Lodpfx Aiezgtzleishh Protection class: IP55 Duty cycle: 40 % Weight at 5 m lift: 65 kg Operating voltage: 400 V 3 PH / 50 Hz Control voltage: 24 V Manual trolley / travelling carriage Type: SiCO-HF 2000 A Design: Manual trolley Beam width: 66 - 220 mm Load capacity: 2,000 kg Self-weight: 17 kg Equipment - Two-rail portal crane system - Crane bridge - Electric chain hoist SIXX8AF - Manual trolley SiCO-HF 2000 A - Load hook - Floor control - Mains connection switch - Steel supports and beam structure - Composite anchor system - Documentation available - Test book available - EC declaration of conformity available Transport data Longest component: approx. 6.2 m Heaviest individual component: approx. 300 kg Total weight of the system, based on experience, approx. 2,000 - 3,500 kg Application areas Mechanical engineering Assembly work Production Maintenance Workshop operation Logistics Material handling Condition Used, functional, dismantled from ongoing operation. Optical condition according to pictures. Test book and technical documentation available. Scope of delivery VETTER P300 PROFI Crane System Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual trolley SiCO-HF 2000 A Support and beam structure Floor control Mains connection switch Test book EC declaration of conformity Documentation Accessories according to pictures (Changes and errors in the technical data are subject to change.) Subject to prior sale.

Condition: excellent (used), Year of construction: 2020, VETTER P300 PROFI Crane System Manufacturer / Type Manufacturer: Vetter Krantechnik GmbH Type: P300 Year of manufacture: 2020 Design: PROFI crane system as a two-rail gantry with crane bridge Technical data Load capacity: 1,600 kg Crane bridge span: 5,100 mm Support spacing L: 5,570 mm Support spacing B: 5,100 mm Beam length: 5,470 mm Overall dimensions of the system: approx. 6,020 x 5,800 mm Bottom flange of crane bridge: 4,145 mm Bottom flange of gantry beam: 4,567 mm Overall height: 4,905 mm Classification according to EN 15011: HC2 / S2 Ledpfxjzgrzqo Aiiohh Steel structure group: 18/30/30 Operating voltage: 400 V / 50 Hz Control voltage: 24 V Max. permissible hoist weight: 85 kg Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of manufacture: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Lifting motor power: 1.50 / 0.37 kW FEM class: 2m / M5 Protection class: IP55 Duty cycle: 40 % Weight at 5 m lift: 65 kg Trolley / Running gear Type: SiCO-HF 2000 A Variant A Load capacity: 2,000 kg Beam width: 66 - 220 mm Weight: 17 kg Equipment Two-rail gantry crane system Crane bridge Electric chain hoist SIXX8AF Manual trolley SiCO-HF Load hook Control / Operating element Main switch Steel supports and beam structure Documentation / Inspection certificate available Accessories as shown in the pictures Areas of application Mechanical engineering Assembly work Production Maintenance Workshop operation Material handling Logistics Weight Total weight of the system is approximately 2,000 to 3,500 kg, depending on experience, depending on the installed steel profiles, foundation plates and equipment variants. Condition Used. System was installed and in operation. Optical condition as shown in the pictures. Inspection certificate and documentation available. Scope of delivery VETTER P300 PROFI Crane System Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual trolley SiCO-HF Support and beam structure Control / Operating elements Documentation / Inspection certificate Accessories as shown in the pictures Subject to changes and errors in the technical data and specifications. Subject to prior sale.

Year of construction: 2022, condition: used, Used machine Window joint cutter Features and technical data: - Power input: 1900 W - Output power: 1220 W - No-load speed: 7800 rpm - Milling disc max.: 170 mm - Cutting depth: 0–55 mm - Cutting height/joint width from 4.7 mm - Cutting height adjustment in 2 mm increments - Minimum distance to lower support surface: 2.5 mm - Swivels 180° - Spindle thread: M 14 - Weight: 4.5 kg Ljdpfx Ajyq T I Ijiiohh - Sound pressure level LpA: 99 dB(A) - Sound power level LWA: 110 dB(A) Availability: short-term Warehouse location: 63934 Röllbach

Year of construction: 1988, condition: used, Wagner EKG 1.000/600 Electric forklift Year of manufacture: 1988 Load capacity: 1,000 kg Weight: 2,190 kg Availability: short notice Lsdpfjx Tkgzsx Aiijhh Location: Flörsheim

Condition: new, functionality: fully functional, Year of construction: 2025, load capacity: 3,000 kg, lifting height: 5,500 mm, free lift: 1,735 mm, fuel type: electric, mast type: triplex, construction height: 2,505 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Electromechanical Condition: New unit Technical condition: New Front tire type: Non-marking Front tire size: 28x9-15 Rear tire type: Non-marking Rear tire size: 6.50-10 Battery voltage: 80V Battery capacity: 350Ah Battery manufacturer: Noblelift Ledpszgpifefx Aiijhh Battery type: Lithium-ion Battery year of manufacture: 2025 Battery condition: New Description: In addition to this unit, we also offer other forklifts and warehouse equipment. All our machines are workshop- and FEM4.004-inspected. Please contact us by email or phone. You can also find us at hsr-gabelstapler. Of course, we also buy your used equipment, even if you do not purchase a vehicle from us. Lease-purchase and financing options are available on request at attractive conditions. We are happy to provide you with expert advice on our vehicles. Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, half cabin, load guard, full free lift, CE certificate, non-marking tires, lithium-ion technology, interior mirror, exterior mirror, beacon, windshield wiper, single-pedal, LED, seat,

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 4,601 h, load capacity: 3,500 kg, lifting height: 4,890 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,275 mm, fork length: 1,600 mm, drive type: Elektro, Electric 4-wheel forklift ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Automatic Condition: Refurbished, no warranty Lhodpfx Aozgpb Isiieh Technical condition: Very good Front tire type: Non-marking Front tire condition: 60 - 80% Rear tire type: Non-marking Rear tire condition: 80 - 100% Battery voltage: 80V Battery capacity: 840Ah Battery type: PzS Battery year of manufacture: 2018 Description: Price includes a new UVV inspection and new paintwork. The 2018 battery will be regenerated using a power cycler, including a Kappa test. (A new or recently refurbished battery can be purchased for an additional charge). Charger included with plug. We will gladly arrange cost-effective transport for you. Lease purchase is generally possible! We are an official Jungheinrich partner. Side shifter, fork positioner, Attachment integrated 3rd valve, 4th valve, rear work lights, front work lights, heater, STVZO compliant, full cabin, full free lift, CE certificate, Mini joystick

Condition: excellent (used), A robust German machine designed for riveting, crimping eyelets, snaps, and other fastening elements. Thanks to its stable construction and electric drive, it ensures consistent and precise operation. Technical specifications: Manufacturer: Constantin Hang Maschinenfabrik Model: 167-12 Serial number: 34,756 Power supply: 220/380 V Motor power: 0.25 kW Motor speed: 1390 rpm Electric drive with foot pedal 220 V electromagnetic brake Adjustment of working settings Stable industrial construction Made in Germany Lhsdpfx Aszgl Hyeiish Condition: Used machine, in good visual condition. Condition as shown in the photos. Sold in the exact condition as depicted in the photographs.

Condition: good (used), Year of construction: 2020, operating hours: 2,076 h, load capacity: 2,000 kg, fuel type: electric, empty load weight: 900 kg, mileage: 2,076 km, This electric ride-on pallet truck from STILL is from 2020; ONLY 2,076 hours on the clock; Fork length 1,600 mm; The pallet truck has a capacity of 2,000 kg; The 2020 battery is equipped with an automatic filling system and an EXTERNAL charger; Schedule an appointment for a test drive. Lhedjxwluxjpfx Aiioh

Condition: used, Available quantity: 3 units Manufacturer: Cleco Model: 48ESE25D3 Lsdpfxezgf D Eo Aiiohh Product type: Electric torque screwdriver Condition: used Design: Inline screwdriver Application area: Industrial series assembly Drive: electric Use: Controlled screw fastening Suitable for: Production and assembly lines Industrial design: yes

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 650 mm, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 1,770 mm, workpiece width (max.): 1,270 mm, workpiece height (max.): 680 mm, feed rate Z-axis: 12 m/min, table load: 7,500 kg, Status: completely overhauled Control system: Mitsubishi - 64-bit CNC Generator power: 70 Amps - multipulse Travel ranges (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 30-position pick-up disc changer Working tank (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Accessories: - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump) The OPS INGERSOLL wire erosion machine GANTRY 1200 HSJ / 64-bit, manufactured in 2006, has undergone a comprehensive and professional overhaul in our facility and is in very good technical and visual condition. During the overhaul, the machine was disassembled to over 70%. All relevant wear parts were carefully inspected. The following overhaul work was carried out on the machine mentioned above: Replacement of the ball screw drive and ball bearings of the X, Y and Z axes. Replacement of all (4) ball screw drives of the tank drive. Inspection and testing of the C-axis for tightness and accuracy. Geometric inspection of all axes according to the OPS INGERSOLL protocol. Thorough cleaning of the entire machine base. Lsdpjzgckvofx Aiiohh Cleaning of the entire working tank including replacement of the felt wipers. Complete repainting of the machine. Overhaul of the dielectric pumps. Replacement of all hydraulic and dielectric lines. Replacement of all pneumatic lines. Cleaning of the control cabinet, generator and the control system. Replacement of all fans and batteries. Overhaul or replacement of all power supplies, units and servo amplifiers. Laser measurement after the machine overhaul. Finally, the machine was subjected to an extensive erosion test in accordance with the quality and testing specifications of OPS INGERSOLL. The machine is immediately ready for use and is ideally suited for reliable production operation.

Condition: used, Year of construction: 2014, total length: 3,400 mm, total width: 1,200 mm, total height: 2,880 mm, Colour: White Empty weight: 1.500 kg - Year: 2014 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 183610114 - Main motor power [kW]: 1.5 - Press drive: Hydraulic Lhsdpszgbugjfx Aiish - Max. clamping width [mm]: 3000 - Max. clamping height [mm]: 1710 - Max. clamping depth [mm]: 100 - Number of cylinders [pcs]: 4 - Cylinder stroke [mm]: 1200 - Options: Remote control, Horizontal/vertical cylinders separately controlled - Voltage [V]: 400 - Current consumption [A]: 3.5 - Fuse [A]: 16 - Power [kW]: 1.5 - Transport dimensions: 3400mm x 1200mm x 2880mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Manufacturer: Cleco Model: 18EAE28AM3 Product Type: Electric Torque Screwdriver Condition: Used Design: Angle Screwdriver Application: Industrial series assembly Drive: Electric Use: Controlled screw assembly Ledpfx Aszga Aijiijhh Suitable for: Production and assembly lines Industrial version: Yes

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 9,918 h, load capacity: 3,500 kg, lifting height: 4,830 mm, fuel type: electric, mast type: triplex, drive type: Elektro, Electric four-wheel forklift Ledszf Sirepfx Aiijhh Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Battery voltage: 80V Battery capacity: 775Ah Battery type: PzS Battery year of manufacture: 2022 3rd valve, 4th valve

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 4,586 h, load capacity: 2,000 kg, lifting height: 6,000 mm, free lift: 1,750 mm, fuel type: electric, mast type: triplex, fork length: 1,200 mm, drive type: Elektro, Electric four-wheel forklift Lsdpfx Aisxulqueijhh Mast type: Triplex Transmission: Automatic Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Battery voltage: 48V Battery Ah: 750Ah Battery manufacturer: IBH Hannover Battery type: PzS Battery year of manufacture: 2023 Battery condition: 80 - 100% Description: Price includes a new UVV inspection. Minor paint blemishes on the counterweight. Battery from 2023, overhauled and tested by IBH Hannover, including Kappa test. Charger included with appropriate plug. We will gladly arrange cost-effective transport for you. Lease-purchase option available! Side shifter, 3rd valve, rear work light, front work light, half-cabin, full free lift, CE certificate, safety light.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 2,529 h, load capacity: 1,500 kg, lifting height: 4,350 mm, free lift: 1,400 mm, fuel type: electric, mast type: triplex, construction height: 2,050 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Automatic Condition: Refurbished, no warranty Technical condition: very good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 60 - 80% Battery voltage: 24V Battery capacity: 1000Ah Battery manufacturer: Exide Battery type: PzS Battery year of manufacture: 2025 Battery condition: 80 - 100% Lsdpfxjzf Sbbs Aiiohh Description: Price includes a new UVV inspection. Paintwork is in good condition (a new paint job can be purchased for an additional EUR 1,000.00 net). The battery, manufactured in 2025, will be regenerated with a power cycler including a Kappa test. Charger included, with plug. We will gladly arrange cost-effective transport for you. Lease purchase is generally possible! We are an official Jungheinrich partner. Side shifter, 3rd valve, front work light, full free lift, CE certificate, safety light.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 7,515 h, load capacity: 3,000 kg, lifting height: 5,485 mm, free lift: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,480 mm, drive type: Elektro, Electric four-wheel forklift Load center: 600 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Battery type: PzS Battery year of manufacture: 2019 Lhsdpfx Aezf Sa Reiijh Battery condition: 80 - 100% Description: The vehicle will be inspected according to UVV regulations. Before delivery, the machine will undergo a service and be cleaned. Upon request, the machine can be painted for an additional charge. Drum clamp, side shifter, 3rd valve, 4th valve, rear work light, front work light, half cab, full free lift, joystick.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 672 h, load capacity: 1,600 kg, lifting height: 4,625 mm, free lift: 1,519 mm, fuel type: electric, mast type: triplex, construction height: 2,121 mm, drive type: Elektro, Electric 3-wheel forklift Mast type: Triplex Condition: Ready for use and fully functional Ljdpfx Aioy N E Eqsiehh Technical condition: good Battery voltage: 48V Battery capacity: 500Ah Battery type: PzS Battery year of manufacture: 2019 Rear work light, front work light, LED, seat

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 4,246 h, load capacity: 2,500 kg, lifting height: 4,760 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, drive type: Elektro, Electric 4-wheel forklift Load centre: 600 mm ISO class: ISO Class 2 = 1,000 – 2,500 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Front tyres type: Superelastic Front tyres condition: 40 – 60% Rear tyres type: Superelastic Rear tyres condition: 40 – 60% Battery voltage: 80V Battery type: PzS Battery year: 2021 Battery condition: 80 – 100% Description: Lodpfezf Sawjx Aiijhh Sideshift, double pallet fork, 3rd valve, rear work light, front work light, heating, full cab, full free lift, joystick, LED.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 7,830 h, load capacity: 1,600 kg, lifting height: 5,470 mm, fuel type: electric, mast type: triplex, construction height: 2,460 mm, drive type: Elektro, Electric 3-wheel forklift Load center: 500 Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Non-marking Front tire condition: 80 - 100% Rear tire type: Non-marking Ljdpfx Aszf Saqeiiehh Rear tire condition: 80 - 100% Battery voltage: 48V Battery type: Lithium-ion Battery year of manufacture: 2019 Battery condition: 80 - 100% Description: The vehicle will undergo a safety inspection according to UVV regulations. Before delivery, the machine will receive a service and be cleaned. Upon request, the machine can be painted for an additional charge. In addition to this model, we have approximately 120 other forklifts of all weight classes in stock at our warehouse in Meschede-Calle. Visit our website – rf-stapler. Lease-purchase and financing options are available at favorable terms. We are also happy to buy your used forklift, even if you do not purchase a vehicle from us. Our forklift specialist workshop specializes in the repair, service, refurbishment, and overhaul of your forklift. We can also display your vehicle for sale at our location. Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, full cabin.

Condition: used, Year of construction: 2023, load capacity: 3,500 kg, lifting height: 4,660 mm, total length: 3,870 mm, - Bedienung Sitzgerät - Tragfähigkeit/Last 3500kg - Lastschwerpunkt 500 mm - Lastabstand 468 mm - Achslast mit Last vorn/hinten kg 8042/958 - Achslast ohne Last vorn/hinten kg 2662/2838 - Spurweite vorn/hinten mm 1002/900 - Neigung Hubgerüst/Gabelträger vor/zurück ° 7/7 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 3941 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 4141 - Wenderadius 2273 mm - Kleinster Drehpunktabstand 649 mm - Fahrgeschwindigkeit (Blue-Q/Standard/Sprint) mit Last km/h 18/18/20 - Fahrgeschwindigkeit (Blue-Q/Standard/Sprint) ohne Last km/h 18/18/21 - Hubgeschwindigkeit (Plus*//Standard Performance) mit Last m/s 0,53//0,44 - Hubgeschwindigkeit (Plus*//Standard Performance) ohne Last m/s 0,57/0,51 - Senkgeschwindigkeit mit Last m/s 0,50 - Senkgeschwindigkeit ohne Last m/s 0,43 - Zugkraft (Plus*//Standard Performance) mit Last N 10300/7590 - Zugkraft (Plus*//Standard Performance) ohne Last N 10650/8015 - Max. Zugkraft (Plus*//Standard Performance) mit Last N 20900/16920 Lhsdpszf Rkzefx Aiioh - Max. Zugkraft (Plus*//Standard Performance) ohne Last N 20290/17170 - Steigfähigkeit (Plus*//Standard Performance) mit Last % 17,8/12,9 - Steigfähigkeit (Plus*//Standard Performance) ohne Last % 28,2/21,9 - Max. Steigfähigkeit (Plus*//Standard Performance) mit Last % 24,2/20,6 - Max. Steigfähigkeit (Plus*//Standard Performance) ohne Last % 2482/28,2 - Beschleunigungszeit 15 m (Plus*//Standard Performance) mit Last s 5,7/6,3 - Beschleunigungszeit 15 m (Plus*//Standard Performance) ohne Last s 5,0//5,4 - Betriebsbremse Hydraulisch betätigte Lamellenbremse - Umschlagleistung (Plus*//Standard Performance) t/h 258/245 - Energieverbrauch bei Umschlagleistung (Plus*//Standard Performance) kWh/h 8,6/8,0 - Arbeitsdruck für Anbaugeräte bar 250 - Ölstrom für Anbaugeräte l/min 55 - Schalldruckpegel LpAZ (Fahrerplatz) dB(A) 70 - Humanschwingung: Beschleunigung nach EN 13059 m/s² 0,57 - Anhängerkupplung, Art/Typ DIN Bolzen - Integrierte Ablagen und Getränkehalter - Anzeige- und Bedieneinheit mit Display, Funktionstasten und Menüführung (spritzwassergeschützt) - MSG 65 Grammer Sitz mit Kunstlederbezug - Haltegriff am Schutzdach vorn und hinten - Mehrhebelbedienung - 3 festgelegte und 2 frei konfigurierbare Fahrprogramme, Energiesparmodus Blue-Q, Sprintmodus für höchste Umschlagleistung auf Knopfdruck - Anzeige des Energieverbrauchs und der verbleibenden Fahrzeit bei aktuellem Batterieladestand - Lithium-Ionen-Batterie 1:1 austauschbar - Automatische Feststellbremse - Curve Speed Control - Intelligente Sitzgurtkontrolle mit Logik-Prüfung

Condition: used, amount 1 Palette Assortment of machine and fastening parts – ready for immediate use Extensive selection: --> Threaded rods — long, fully threaded rods in various diameters --> Hex screws — various lengths, some fully threaded, some partially threaded --> Nuts — standard hex nuts compatible with the screws and rods --> Washers — several sizes, neatly sorted --> T-slot nuts — rectangular/square nuts with threads, typically used in machine and clamping systems --> Spacers or clamping blocks — small threaded metal blocks, presumably for fixtures Total Package Price Ljdpfezf Nppsx Aiishh

Condition: good (used), Year of construction: 2015, operating hours: 5,581 h, load capacity: 1,600 kg, lifting height: 4,920 mm, fuel type: electric, mast type: triplex, construction height: 2,160 mm, empty load weight: 3,500 kg, mileage: 5,581 km, Electric three-wheel forklift Brand: STILL (Germany) Year of manufacture: 2015 Capacity: 1,600 kg Lifting height: 4,920 mm Mast height (collapsed): 2,160 mm Only 5,581 operating hours Equipped with: FREELIFT + SIDESHIFT CONTAINER forklift FOURTH hydraulic valve Battery: 2015 Equipped with an external charger Automatic filling system Watch the video on YouTube. Lodpfx Aoy Tm Sgsiiohh

Condition: excellent (used), CATALOG NUMBER 7099 TECHNICAL DATA - Engine power: 132 kW - Shaft diameter: 65 mm - Shipping dimensions (L/W/H): 120x80x700 mm - Engine dimensions (L/W/H): 550x1050x700 mm - Weight: 630 kg ADVANTAGES – Used engine – Very good condition Net price: 10,900 PLN Lhedox Uz Sqopfx Aiijh Net price: 2,590 EUR (based on an exchange rate of 4.2 EUR) (Prices may change with significant fluctuations)