Used Edelmann Graphics Starprint V 76 for sale (37,106)

Condition: good (used), Year of construction: 2005, functionality: fully functional, Clamping force: 4,900 kN Operating pressure: 206 bar Heating plate dimensions: 700 x 700 mm Piston diameter: 558.8 mm Stroke: 250 mm Daylight opening: 300 mm Max. weight of the heating plates: 560 kg Oil tank: 1,100 L Rated power: 82 kW Heating power: 56 kW Vacuum motor power: 4.0 kW Hsdpozz Rdtofx Agtsnt Light curtain, distance to the tool area: 810 mm Stroke of the vacuum cover: 200 mm Machine dimensions: 3,975 x 2,935 x 2,555 mm Equipped with an overhead crane (monorail) with three chain hoists Manufacturer: STAHL Year of manufacture: 2011 Lifting capacity: 3 x 400 kg Length of the overhead crane: approx. 3,500 mm Mobile carriage Lifting capacity: 400 kg Lifting height: 3,000 mm Lifting speed, main lift: 4 m/min Lifting speed, fine lift: 1 m/min The vulcanizing press from the manufacturer PAN STONE was used by a renowned German company in the sealing technology sector. This company is known for its high quality and innovation in sealing production. It has always been professionally maintained and is in good condition.

Condition: used, Year of construction: 2011, Gorreri DVG 500 dispensing unit Year of manufacture: 2011 Condition: functional Suitable for filling, dispensing, or decorating various types of products made from doughs, creams, jams, and other liquid products. Performance: max. 40 cycles per minute Compressed air: 250 l/min (6 bar) Hnjdpfx Agez A Sa Astot Dimensions L x W x H: 1200 x 600 x 1850 mm Weight: 80 kg

Condition: new, width of the strips 100 mm band length 2000 mm band speed m/sec tube diameter 16,5 - 76 mm angle adjustable from - to 0 - 65 Grad connected load frequency 400 V total power requirement 2,2 kW weight of the machine ca. 0,17 t dimensions of the machine ca. 1,3 x 0,7 x 1,1 m ipe grinding machine with 10 grinding rollers: 16.5 - 18.5 - 22.5 - 29.5 - 35 - 39.5 - 45.5 - 9.5 - 57.5 - 73.5 mm Pipe clamping area 90mm Hnodpfx Ajt Eaf Ujgtjt

Condition: ready for operation (used), Year of construction: 2009, operating hours: 15,600 h, functionality: fully functional, machine/vehicle number: 216615, turning length: 995 mm, turning diameter over cross slide: 660 mm, turning diameter: 660 mm, spindle motor power: 22 W, spindle speed (max.): 12,000 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, milling spindle length: 30 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 35 rpm, feed length X-axis: 580 mm, feed length Y-axis: 160 mm, feed length Z-axis: 1,045 mm, torque: 468 Nm, bar passage: 76 mm, total height: 2,500 mm, total length: 7,000 mm, total width: 2,000 mm, distance table center to spindle nose: 1,234 mm, overall weight: 9,760 kg, spindle diameter: 76 mm, feed force X-axis: 38 N, feed force Y-axis: 26 N, feed force Z-axis: 38 N, Equipment: documentation/manual, rotational speed infinitely variable, MAZAK INTEGREX 200-IV / 200-IVS Chuck size: 8 inches Max. swing diameter: Ø 660 mm Max. machining diameter: Ø 660 mm Max. machining length: 995 mm Max. bar capacity: up to Ø 65 mm Main spindle: Spindle speed: 35–5,000 rpm Main spindle motor power: 22 kW Spindle bore diameter: Ø 76 mm Milling spindle: Spindle speed: 15–12,000 rpm Milling spindle motor power: 18.5 kW Max. torque of the milling spindle: 119 Nm Max. milling tool size: Ø 125 × 300 mm Travel ranges: Hodpfjz A Huhsx Agtent X-axis: 580 mm Z-axis: 1,045 mm Y-axis: 160 mm

Condition: used, Year of construction: 2018, functionality: fully functional, total length: 2,200 mm, total width: 650 mm, total height: 2,770 mm, The Marel V-Cut 200 is a modern machine designed for the precise volumetric portioning of boneless meat. The device is engineered to cut lightly frozen products into portions with a consistent weight and uniform shape, ensuring high efficiency and an aesthetically pleasing product presentation. Key advantages: - Precise portioning into portions with consistent weight and uniform shape. - Maximum utilization of raw materials thanks to volumetric portioning technology. - Option to prepare individual portions or shingled portions, ready for packaging. - Side Press function, which gives the products a uniform appearance and facilitates further automation of the process. Hnsdpfx Agozpwkpetot - Intuitive operation and easy cleaning and hygiene maintenance. Application: The machine is used in meat processing plants for portioning: - pork loin, - leg, cutlet, and neck, - beef sirloin, - chicken breast, - turkey breast, - and other boneless meat cuts. Technical data: Width: 650 mm Length: 2200 mm Height: 2770 mm

Condition: refurbished (used), Year of construction: 2016, operating hours: 4,076 h, load capacity: 2,000 kg, lifting height: 2,010 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 1,530 mm, battery voltage: 24 V, fork length: 1,200 mm, empty load weight: 900 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN THE FIELD. Hnjdozdi Enjpfx Agtot Our forklifts are technically refurbished to meet FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including the drive, brakes, steering, and electrical system – each vehicle is thoroughly inspected and repaired. * Made in Germany – with responsibility and precision * Strict technical inspection * 400+ vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after the purchase Test and get advice on-site now – we will find the right solution for you. Industrial truck data: Manufacturer: Jungheinrich Type: High-lift pallet truck ERD 220 FP Drive type: Electric Load capacity: 2,000 kg Year of manufacture: 2016 Operating hours: 4,076 Lifting height: 2,010 mm Mast type: Duplex Initial lift: Yes Overall height: 1,530 mm Fork length: 1,200 mm Unladen weight: 900 kg Load center: 600 mm Tires: Polyurethane Model type: ERD 220 FP Battery type: PzS Voltage: 24 V Battery weight: 288 kg

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 1580000152, total width: 610 mm, total height: 1,300 mm, total length: 690 mm, overall weight: 89 kg, You can find more information in the attached brochure. Hnodpfxsztwfhj Agtjt This is the TAC V+ GR/BK model. There are 3 air purifiers available. If all 3 are purchased, the total price is €500.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 020033, spindle speed (max.): 5,000 rpm, spindle diameter: 110 mm, controller model: Siemens SINUMERIK, empty load weight: 11,000 kg, counter spindle speed (max.): 5,000 rpm, The machine is expected to be available for approximately €4,000, including loading onto a truck (FOB). TECHNICAL DETAILS Working area X1-axis: 1,190 mm Working area Y1-axis: 120 mm Working area Z1-axis: 260 mm Working area X3-axis: 540 mm Working area Y3-axis: 120 mm Working area Z3-axis: 260 mm Handling space X1-axis: 490 mm Axes and Feed Feed force X1/Z1/Y1: approx. 8/10/10 kN Feed force X3/Z3/Y3: approx. 8/10/10 kN Rapid traverse speed X1/Z1/Y1: approx. 80/40/7.5 m/min Rapid traverse speed X3/Z3/Y3: approx. 40/40/7.5 m/min Acceleration X1/Z1/Y1: 7/7/7 m/s² Acceleration X3/Z3/Y3: 7/7/7 m/s² Hjdozdqdfspfx Agtsnt Spindle Speed at main and counter spindle: 5,000 RPM Power at 100% duty cycle, main spindle: 20 kW Torque at 100% duty cycle: 105 Nm Power at 40% duty cycle: 27 kW Torque at 40% duty cycle: 145 Nm Spindle bore: 65 mm Spindle diameter at front bearing: 110 mm Spindle nose diameter (cylindrical): 140 mm Hydraulic full-stroke cylinder OVS80 - Main spindle Piston stroke: 32 mm Piston area: 34.36 cm² Clamping pressure: 8 to 80 bar Tensile or compressive force at 80 bar: max. 27.2 kN Leakage oil volume at operating pressure 80 bar: max. 2.2 l/min Hydraulic full-stroke cylinder OVS65 - Counter spindle Piston stroke: 32 mm Piston area: 26.1 cm² Clamping pressure: 8 to 100 bar Tensile or compressive force at 100 bar: max. 26.1 kN Leakage oil volume at operating pressure 100 bar: max. 3 l/min Y-axis Slide travel: 120 mm Feed force: 10 kN Rapid traverse: 7.5 m/min Resolution: 0.05 mm Speed of driven tools: 6,000 RPM MACHINE DETAILS Control system: Siemens SINUMERIK Unloading device Swivel angle: 90 degrees Swivel time: 2 s Slide travel: 100 mm Rapid traverse speed: 6 m/min Workpiece weight: approx. 10 kg Workpiece diameter: 200 mm Electrical data Rated power: 45 kW Apparent power: 53 kVA Rated current: 76 A Voltage: 400 V Frequency: 50/60 Hz Dimensions and weight Dimensions with chip conveyor (L x W x H): 2,770 x 4,435 x 2,750 mm Weight: approx. 11,000 kg EQUIPMENT Two tool holders with 12 tool positions each, VDI 30 Note: Further technical data can be found in the attached data sheet. The machine is not equipped with a B-axis.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 16,140 h, functionality: fully functional, machine/vehicle number: 111214, travel distance X-axis: 1,100 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Heidenhain 530, overall weight: 7,800 kg, TECHNICAL DETAILS Travel range X-axis: 1,100 mm Travel range Y-axis: 610 mm Travel range Z-axis: 610 mm Number of positions in tool changer: 30 Table dimensions: 1250 x 610 mm MACHINE DETAILS Hsdpfxez Apdzo Agtjnt Control system: Heidenhain 530 Operating hours: 16,140 h Machine weight: approx. 7,800 kg

Condition: used, Year of construction: 1998, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Hermle 3-Axis Machining Center Type C 600 V Hnodpfx Aozxpp Ajgtjt Year 1998 CNC Heidenhain TNC

Condition: good (used), Paper cutting guillotine Perfecta 76 TVC Device in perfect condition, very low mileage. After general renovation in 2013. Technical data: Cutting width: 760 mm Stack height: 110 mm Weight: 1650 kg Power supply: 400 V Hodpeztz Efsfx Agtsnt Equipment: – programmer with touch screen – photocells – air table – cutting line – chrome table surface – enlarged side tables – hydraulic clamp with smooth force regulation – instructions – full set of tools – plate for clamp – tapping block – spare knife

Condition: used, Year of construction: 2002, for coils and strip material from 0.4 - 15 mm max./min. board thickness 60/6 mm Hodpjz Abppjfx Agtsnt max. edge overhang 66 mm large magazine table, D = 820 mm transport chain with automatic lubrication blocking roller for shortest workpiece sequence safety/noise protection hoods central dust extraction connection, D = 160 mm, join milling cutters, D = 120 mm chip collection box, D = 100 mm equipped with: > Join milling cutters 1961 incl. DIA tools > memory-programmable screen control unit SPK 18000 (color screen) > Automatic edge magazine 1901 for coils and strip material > Glue station 1906 for cartridges + granules, including sensing nozzle > Pressing unit 1926, motor-driven > Saw hoods 1918 > Edge trimming unit 1920 > Radius cutter 1929 incl. chip collection box, pneumatic adjustment (separate for top and bottom) > Profile milling unit 1934 for longitudinal processing and corner copying (bottom + front edge) > Profile milling unit 1933 for longitudinal processing and corner copying (top + rear edge) > Flat cutter 1964, controlled by the application > Deburring unit 1944, incl. immersion control > Spraying device 1856 at the infeed and outfeed > Feed rate 12/16 m/min > Motor-driven bridge adjustment > Infeed guide, motor-driven Length 7600 mm Width 1300 mm Height 2000 mm Weight 2800 kg

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 67025/129, Year of construction: 1986, load capacity: 12,500 kg, lifting height: 5,500 mm, overall weight: 15,000 kg, Completely refurbished just over a year ago. Forklift is in perfect condition. Has not been used much in the past year. Hedpjxqpqdjfx Agtjnt Every inspection and test is available.

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, operating hours: 5,000 h, pressing force: 200 t, table width: 1,400 mm, table length: 3,200 mm, total length: 3,200 mm, total width: 1,400 mm, total height: 2,900 mm, overall weight: 23,000 kg, operating temperature: 200 °C, workpiece height (max.): 150 mm, temperature: 210 °C, For sale is a virtually new veneer press with an infeed/outfeed table from the German manufacturer Wemhöner, model KTV1E (serial number 1645, year of manufacture 1992). The machine is in excellent condition and has seen very little use. Machine type: Continuous press Manufacturer: Wemhöner Type: KTV1E Serial number: 1645 Selecta Year of manufacture: 1992 Location: 57223 Kreuztal Available: immediately Technical data Press length: 3200 mm Press width: 1400 mm Heating plates: yes Heating medium: oil Infeed: yes Conveyor belt: 3200 x 1900 mm Outfeed belt: 3200 x 1900 mm Press area: 3200 x 1450 mm Clearance height: approx. 100 mm Preheating temperature: 200° Heating capacity: 45 kW Heating medium: oil Hnodpjwnpcdjfx Agtst Pressing force: 200 tons The press machine is in top condition, has seen very little use, and has been used exclusively for development projects for the past 15 years. I would be happy to send you more information and pictures upon request. The machine is available immediately and can be inspected at any time by appointment. Self-collection only! Functional video available upon request. If you are interested, I am happy to provide you with further information or arrange a viewing!

Condition: used, Year of construction: 1989, machine/vehicle number: 1115.5117-25, turning diameter over cross slide: 700 mm, feed rate X-axis: 10 m/min, turning diameter over bed slide: 750 mm, controller model: Fanuc 15, distance between centers: 3,000 mm, TECHNICAL DETAILS Swinging diameter over bed: 750 mm Swinging diameter over cross slide: 700 mm Distance between centers: 3,000 mm Feed rate: 0.1 – 10,000 mm/min Rapid traverse: 10 m/min Spindle torque (max.): approx. 4,000 Nm Spindle power: approx. 65 kW Spindle nose: Size 11 according to DIN 55026 Spindle bore: 130 mm Tool holder: 6 × VDI 60 according to DIN 69880 Tailstock diameter: 130 mm Tailstock travel: 120 mm MACHINE DETAILS Hedjz Apc Repfx Agtjnt Control system: Fanuc 15 Power chuck: Forkardt 3 FNC 500-125 Dimensions & Weight Machine dimensions (L x W x H): approx. 8.0 × 3.5 × 2.9 m Shipping dimensions (L x W x H): 8.0 × 2.3 × 2.9 m Machine weight: approx. 28,000 kg

Condition: used, Year of construction: 2007, Technical details: Hsdpfxozzvx Ao Agtont swing diameter: 400 mm turning height: 950-1500 mm Turning length: 210 mm x-travel: 310 mm z-travel: 350 mm spindle turning speed range: 20-3500 U/min weight of the machine ca.: 11 t dimensions of the machine ca.: 4,5 x 3,5 x 2,7 m

Condition: used, Year of construction: 2007, Technical details: swing diameter: 400 mm turning height: 950-1500 mm Turning length: 210 mm x-travel: 310 mm Hedpfx Aezzvxvogtsnt z-travel: 350 mm spindle turning speed range: 20-3500 U/min weight of the machine ca.: 11 t dimensions of the machine ca.: 4,5 x 3,5 x 2,7 m

Condition: excellent (used), Year of construction: 2021, Used HOMAG Drillteq V-200 - Year of manufacture: 2021 - Immediately available - Excellent condition - Tools can be included for an additional charge. Hjdjzdvuvepfx Agtjnt Please feel free to contact us if you have any questions.

Condition: good (used), mileage: 265,350 km, power: 140 kW (190.35 HP), first registration: 11/2017, fuel type: diesel, wheelbase: 3,200 mm, fuel: diesel, color: blue, gearing type: automatic, emission class: euro6, number of seats: 5, Year of construction: 2017, Equipment: Bluetooth, air conditioning, central locking, electric window regulation, navigation system, power assisted steering, = Additional options and accessories = Hnodpfx Agez A Sugjtjt - Disc brakes = Special features = WDF44781313385470 = More information = Number of cylinders: 4 Engine capacity: 2,143 cc Unladen weight: 2,145 kg Payload: 880 kg GVW (Gross Vehicle Weight): 3,100 kg MOT (Ministry of Transport) inspection: valid until Nov. 2026 Technical condition: good Optical condition: good

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 20080010, power of the servo motor: 550 W, input voltage: 230 V, type of input current: AC, pneumatic connection: 5.5 bar, VIBEMAC V700 Automatic Pocket Hemming Unit with Conveyor (2020) High-Speed Automatic Back Pocket Hemming Machine for Denim & Workwear Production VIBEMAC V700 is a high-performance automatic pocket hemming unit manufactured by VIBEMAC S.p.A. (Italy), specifically designed for automated back pocket hemming in denim, jeans, and workwear production. The machine is equipped with VIBEMAC's patented continuous conveyor feeding system, ensuring precise and repeatable hemming results while preventing fabric distortion, waving, or twisting, even when processing heavy denim or stretch fabrics. Finished pockets are automatically transferred to the integrated rotating collection disk via a pneumatic unloading system, allowing continuous high-volume production with minimal operator intervention. The machine was operating in professional garment production until factory shutdown and remains in fully functional condition. Technical Specifications • Manufacturer: VIBEMAC S.p.A. • Model: V700 • Year: 2020 • Serial Number: 20030010 • Country of Manufacture: Italy • Machine Type: Automatic Pocket Hemming Unit • Power Supply: 230 V, Single Phase • Pneumatic Requirement: 5.5 bar Hnsdpjzgwrhsfx Agtot • Main Motor: Mitsubishi Electric XL-G554-20Y AC Servo Motor • Motor Power: 550 W • Stitch Type: 2-Needle Chainstitch • Stitch Length: Adjustable 0.9–5.0 mm via control panel • Production Capacity: Approximately 1,800–2,000 pockets per hour Key Features • Patented continuous conveyor feeding system • Designed specifically for automatic pocket hemming • Consistent and repeatable seam quality • Suitable for denim, stretch fabrics, and workwear materials • Pneumatic automatic unloading system • Rotating collection disk with capacity for approximately 600 finished pockets • Adjustable stitch length and sewing parameters • Electronic operator control panel • Easy-access maintenance design • Heavy-duty industrial construction • Suitable for continuous production environments Includes • VIBEMAC V700 automatic hemming unit • Integrated conveyor feeding and transport system • Automatic rotating pocket collection disk • Mitsubishi AC servo motor • Electronic control cabinet • Industrial machine stand • Pneumatic components • Thread stand and guides Applications • Back pocket hemming • Jeans manufacturing • Denim garment production • Workwear production • High-volume apparel manufacturing • Automated garment component production Condition • Fully functional • Previously used in professional garment manufacturing • Serviced on 27.02.2026 • Good industrial condition • Normal cosmetic wear consistent with factory use • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling, loading, transportation, and all related costs. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI Jeans factory liquidation.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, planing width: 500 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 4,700 rpm, total length of planing tables: 800 mm, total width: 920 mm, total height: 1,140 mm, overall weight: 450 kg, VEBA S500 PLANER | 500 MM | 4 KNIVES | 4.3 kW | 2009 | ITALY | Professional VEBA S500 planer/thicknesser from the renowned Italian company VEBA Meccanica S.r.l. This machine is designed for the precise planing of wooden components to a specific thickness. Its robust, compact design and 4-knife cutterblock make it ideal for use in both carpentry workshops and for the production of solid wood components. Hjdez A A Iwepfx Agtont Made in Italy, this machine is used and ready for operation. KEY FEATURES: - Renowned Italian brand VEBA - Model S500 - Planing width of 500 mm - 4-knife cutterblock - Traditional knives - Robust construction - 2 feed speeds - Material height range up to approx. 240 mm - Maximum planing depth of 8 mm - Table height adjustment - 2 rollers in the table to facilitate material feed - Machine equipped with CE marking - Year of manufacture 2009 TECHNICAL DATA: - Planing width: 500 mm - Work table dimensions: approx. 500 × 800 mm - Material height range: approx. 4–240 mm - Maximum planing depth: 8 mm - Planing cutterblock: Ø 110 mm - Number of knives: 4 pcs - Type of knives: traditional - Cutterblock rotational speed: approx. 4700 rpm - Feed speed: 6.5 / 13 m/min - Table rollers: 2 pcs - Height adjustment: electric and mechanical MOTOR / POWER SUPPLY: Motor power: 4.3 kW Voltage: 400 V Power supply: 3 phases DIMENSIONS AND WEIGHT: Machine dimensions: approx. 1000 × 920 × 1140 mm Weight: 450 kg – according to the nameplate We invite you to test the machine on-site. Financing options available through leasing or installment plans. WE ORGANIZE TRANSPORT.

Condition: used, Year of construction: 2009, Extendable spiral mixer Diosna SPV 240 AD Hedpfez A R Dysx Agtsnt Dough capacity: 240 kg Flour capacity: 150 kg Bowl volume: 355 l Bowl diameter: 960 mm Bowl height from the floor: 899 mm Automatic timer with 2 clocks Two speed settings Hydraulic clamp locking system Friction wheel drive Includes 2 bowl carts

Condition: used, Year of construction: 2009, Extendable spiral mixer Diosna SPV 200 AD Dough capacity: 200 kg Flour capacity: 125 kg Bowl volume: 300 l Bowl diameter: 900 mm Bowl height from the floor: 879 mm Timer control with 2 timers Two speed settings Hydraulic clamp locking Friction wheel drive Hsdpfxsz A R Dtj Agtont Includes 2 bowl carts

Condition: good (used), Year of construction: 2006, machine/vehicle number: JP-F 0018, Offer 26230 Technical data: - Maximum load capacity: 3000 kg - Maximum clamping diameter: 1700 mm - Faceplate diameter: 530 mm - Rotational speed, electrically continuously adjustable: 0.1 to 2.7 rpm - Right and left rotation - E-stop foot switch - Welding current transmission: approx. 600 A Hnedpfszw D Spsx Agtst - Drive: 400 V / 0.2 kW - Space requirement: approx. W 1000 x H 1250 x D 1200 mm - Weight: approx. 550 kg

Year of construction: 2011, condition: used, Max. throughput: 25t/h, inlet width: 1300mm, inlet height: 1200mm, rotor diameter: 1200mm, drive power: 132-315kW, an on-site inspection is possible. Hsdozyq T Ejpfx Agtjnt