Used Doosan Dv 160 S-9 for sale (79,003)

Condition: used, machine/vehicle number: 008382, Max width workable: 800 mm Max length workable: 2800 mm Ijdpfx Ajywadwshyoih Max height workable: 1320 mm Max feed speed: 40 m/min

Condition: used, Year of construction: 2011, clamping force: 1,600 kN, screw diameter: 45 mm, clearance between the columns: 520 mm, injection pressure: 1,914 bar, injection weight: 294 g, mold height (min.): 275 mm, ejector force: 59,000 N, ejector stroke: 160 mm, total length: 5,410 mm, total width: 1,660 mm, total height: 2,140 mm, overall weight: 7,090 kg, Used Sumitomo (SHI) Demag Systec 160/520-600 injection molding machine, manufactured in 2011. Technical specifications: - Clamping force: 160 t (1600 kN) - Injection unit: 600 - Screw diameter: 45 mm, L/D 20 - Specific injection pressure: 1914 bar - Injection volume: 323 cc - Injection shot weight: 294 g - Cylinder heater power: 11.3 kW - Tool plate dimensions: 770 x 770 mm - Distance between columns: 520 x 520 mm - Tool height (min.): 275 mm - Opening stroke: 500 mm - Maximum distance between plates: 1085 mm - Ejector force: 59 kN - Ejector stroke: 160 mm - Weight: 7090 kg - Dimensions (L x W x H): 5.41 x 1.66 x 2.14 m - Control system: NC5 Iodpfjz T Iufsx Ahyeih Equipment: - NC5 control system with color screen - Screw Ø 45 mm, L/D 20 - 5-zone hot runner control - Air blow valve on the moving platen - Clamping force adjustment - Active mold protection (activeProtect) - Demag robot interface - WC5 remote service - Process data logging and statistics - Reinforced oil cooler

Condition: used, Year of construction: 2023, operating hours: 482 h, lifting height: 4,900 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Bobcat D30NXS diesel forklift, year of manufacture: 12/2023, operating hours: only 482h!, rated load capacity: 3,000 kg, fork length: 1,200 mm, lift height: 4,900 mm, triplex mast, hydraulic side shift, engine: [45.6 kW/62 hp], weight: 4,901 kg, very good condition, fully operational and ready for immediate use! We are happy to provide a leasing or financing offer upon request. Mr. Mihm (Tel. ) will be glad to assist you. For more information, please visit our website. Subject to prior sale and errors excepted. Power steering, protective roof Iisdsyxkucspfx Ahyeh = Further information = Lifting capacity: 3,000 kg Closed height: 230 cm For more information, please contact Tobias Ebert.

Condition: used, Year of construction: 2001, Transnorm spiral helix belt curve conveyor right 90°-750-650 IR1200 RA2437 Technical data: Frame width (NB): 750 mm belt width (GuB): 650 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 90° degrees decline: 200 mm / 90° = 800 mm / 360° Isdpfx Asx Sz Iyjhyjih support feet: optionally available Conveying speed (v m/s): 0,35-1,21 Drive: SEW gear motor with movi-mot frequency converter for stepless speedcontroll Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: excellent (used), For sale is an industrial KSB ETABLOC-G 50-160/1102 G4 centrifugal pump integrated with an 11 kW KSB / Klein, Schanzlin & Becker AG electric motor. The pump is used, inspected, and in working order. It features a robust industrial design and is suitable for water, circulation, and process applications. It shows normal signs of use and storage, as visible in the photos. Pump technical specifications: Manufacturer: KSB Aktiengesellschaft Model: ETABLOC-G 50-160/1102 G4 Serial No.: 5-927-220892 / 1 Flow rate Q: 20–80 m³/h Head H: 45–38 m Rotational speed: 2900 rpm Year of manufacture: 1993 Design: block centrifugal pump Connections: flanged Motor data: Manufacturer: KSB / Klein, Schanzlin & Becker AG Motor type: RF 11/2-75 Power: 11 kW Power supply: 3-phase Voltage: 380 V Current: 22 A Frequency: 50 Hz Speed: 2930 rpm cos φ: 0.88 Protection class: IP54 Iiedpfx Ajz Sn Shshyoh Insulation class: F Condition: Used, inspected, and fully functional. Normal signs of use and storage appropriate for the age of the device. Weight: approx. 120 kg The sale includes the complete pump with the electric motor, exactly as shown in the photos.

Condition: excellent (used), For sale: a KSB ETABLOC-GN 65-160/1102.21 centrifugal pump, equipped with an 11 kW electric motor. The pump is used and in working order. It is in good technical condition and shows normal signs of use and storage. The exact visual condition can be seen in the photos. Pump technical specifications: Manufacturer: KSB Aktiengesellschaft Type: ETABLOC-GN 65-160/1102.21 Design: GN11 Ident-No.: 48861861 No.: 5-925-204038 / 1 Flow rate Q: 18–143 m³/h Head H: 35.5–22 m Rotational speed: 2900 rpm Ijdpfx Aez Sn R Rjhyoih Motor technical specifications (50 Hz): Manufacturer: KSB Power: 11 kW Voltage: 380–660 / 420 V Current: 20.8–12.0 / 19.0 A Rotational speed: 2900 rpm cos φ: 0.92 Protection class: IP55 Insulation class: F Motor weight: approx. 79 kg Condition: Used, in working order. Normal signs of wear and tear resulting from previous use and the age of the equipment. Scope of sale: KSB ETABLOC-GN pump with electric motor – exactly as shown in the photos, in the presented condition and configuration.

Condition: excellent (used), Grundfos TPED 50-160 / 2-S AFA-BAQE *New price: €6,500 APPLICATION AREAS - Heating systems - Local domestic hot water systems - Cooling and air conditioning systems FEATURES AND BENEFITS - Low power consumption - Adjustment according to existing operating conditions - Easy to install Technical data: Rotation frequency 2900 rpm Nominal flow rate 17 m³/h Nominal head 12 m Max. hydrostatic head 160 dm Shaft seal BAQE Fluids: Working fluid: Water Fluid temperature range 0..120 °C Fluid temperature 20 °C Density 998.2 kg/m³ Materials: Pump casing: Cast iron EN-JL1040 ASTM A48-40 B Impeller: Cast iron EN-JL1030 ASTM A48-30 B Electrical data: Motor type 80B Number of poles 2 Rated power - P2 2 x 1.1 kW Industrial frequency 50 Hz Rated voltage 3 x 380-500 V Rated current 2.15-1.80 A Cos (power factor) 0.91-0.82 Rated speed 360-4000 rpm Energy efficiency 88.5% Protection class (IEC 34-5) IP55 Insulation class (IEC 85) F Motor protection: Yes Motor number 98362352 Mounting: Maximum ambient temperature 50 °C Iisdpfsfuappjx Ahyjh Max. operating pressure 16 bar Max. pressure at a given temperature 16 bar / 120 °C Standard flange DIN Connection code F Pipe connection DN 50 Permissible pressure PN 16 Mounting length 340 mm Motor flange size FF165 Net weight 95 kg Data sheet

Condition: used, mileage: 580 km, power: 66 kW (89.73 HP), first registration: 05/1962, fuel type: diesel, number of seats: 22, gearing type: mechanical, color: beige, Year of construction: 1962, Available in multiple colors (yellow/red/green), built between 1957 and 1964. We also have 8 restoration projects ready to start immediately. Features: 8 sleeping seats or 20 seating capacity * Double tour guide seat * Large club lounge for 8-seat configuration Length: 6,650 mm Width: 2,250 mm Permissible total weight: 6,200 kg Complete restoration Henschel engine Steering wheel manual transmission Roof luggage rack German historic (H) registration, passenger coach - Rental for your event possible. Europe-wide delivery available with our vehicle transporters. We have a wide selection of classic Setra buses: S6, S7, S9 to S14, Mercedes O 319 and O 3500, Saurer bonnet buses. Iijdpfezyx Nzox Ahyjh We make shipment worldwide. Net price: 165,000.00 Euro

Condition: new, GMN TSE 160 - 4000 / 15 grinding spindle SN:R3598395, unused in opened original packaging, 100% functional, delivery contents as per photos. ATTENTION: Please enquire separately for packing and shipping charges! Iodpex Dwp Uofx Ahyjih

Condition: not inspected (used), Year of construction: 1995, functionality: unexamined, throat depth: 500 mm, Manufacturer: Fase Full: 116 kVA Version: 500mm Ijdpfxjuhn Tkj Ahyeih The machine used to be part of a system, its settings and performance were controlled via a central control unit, which is currently missing, This version is required to operate the machine!

Condition: ready for operation (used), Year of construction: 2018, operating hours: 18,845 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 53 mm, travel distance Z-axis: 830 mm, spindle motor power: 33,000 W, controller manufacturer: SIEMENS, controller model: 828D, number of axes: 3, This 3-axis DOOSAN Puma 2600 SY II was manufactured in 2018, designed for precision in horizontal turning. Ideal for complex machining tasks, this machine ensures robust performance and durability. If you are looking to get high quality turning capabilities consider the DOOSAN Puma 2600 SY II machine we have for sale. Contact us for more information. Additional equipment • Mekiload Gantry Loader • Renishaw Equator • Renishaw Equator Iedpfx Ajyr R A Eehyoih • Machine includes a rotary indexing magazine • Machine includes a gantry robot Machine Benefits Qualitative Machine Benefits • Tool change time: 1. 0 second • Max speed (station): 5000 rpm • Holder for turning tools: 25 x 25 mm • Holder for boring bar: Ø50 mm • Coolant pump capacity: 1. 5 kw Technical Machine Benefits • Max. Turning diameter over bed: 780 mm • Max. Turning diameter over slide: 630 mm • Max. Turning length: 760 mm • Main spindle torque: 719 nm • Spindle mount (main): a2 #8 • Sub spindle speed: 6000 rpm • Sub spindle power (30 min): 18. 2 kw • Sub spindle torque: 220 nm • Spindle mount (sub): a2 #5 • Number of stations: 24 (12 driven) Extra Information Machine still under power

Condition: used, Year of construction: 2021, Doosan LSM12N Electric Stacker Compact electric stacker with lithium-ion technology for warehouse and logistics applications. Ideal for transporting and stacking Euro pallets. Robust construction, low-maintenance Li-ion battery, and compact design for operation in confined spaces. Iijdpfx Aoz Diugjhysh Technical Data - Capacity: 1,200 kg - Lift height: 3,200 mm - Capacity at maximum lift height: 800 kg - Load center: 600 mm - Lithium-ion battery: 24 V / 60 Ah - Fork length: 1,150 mm - Service weight: 576 kg - Drive motor: 0.65 kW - Tyres: Polyurethane Features - Electric drive - Lithium-ion technology - Integrated charger - Compact design - Tiller control - Low-maintenance construction Available at short notice

Condition: excellent (used), For sale: industrial KSB centrifugal pump, type EB 32-160, equipped with a 4 kW electric motor. Pump data: Isdpfx Ajz Snt Hohysih • Manufacturer: KSB – Klein, Schanzlin & Becker AG • Type/model: EB 32-160 • Pump number: Motor data: • Motor number: 3358128- • Motor type: AF 112M/2A-11 • Power: 4 kW • Voltage: 380 V • Rotational speed: 2870 rpm • Current: 8.1 A • Frequency: 50 Hz • Protection class: IP54 • cos φ: 0.89 The pump and motor were likely refurbished and inspected by a specialized service provider in 2024, as indicated by the stickers from Elektromotoren Reparaturwerk ROCK and the inspection marking from 2024. We have inspected the pump and it is in working order. Used condition. The exact condition of the device is shown in the pictures.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, total length: 9,500 mm, total width: 1,000 mm, overall weight: 3,000 kg, Silo discharge screw conveyor for dried or wet sawdust. The system is in new condition and comes in its original packaging. The photo is a sample image – the system has never been installed. Iiodpfx Ajz Ix Iqehyeh Discharge screw conveyor for silo internal diameter of 8.9 m. Discharge rate: 40 m³ per hour. Drive power: 15 kW. Lower section: for accommodating the screw conveyor drive, feed drive, main shaft with metering device, and bearings, discharge chute, and blockage sensor. Upper section: with screw shaft, cross-roller swivel joint, and cover hood. Electrical control system is not included!

Condition: new, Year of construction: 2026, machine/vehicle number: PB16040, functionality: fully functional, power: 18 kW (24.47 HP), input voltage: 380 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 160 t, stroke length: 250 mm, operating speed: 10 mm/s, reverse speed: 150 mm/s, table width: 100 mm, table length: 4,000 mm, table height: 850 mm, throat depth: 400 mm, ram plate width: 1,900 mm, ram plate length: 4,000 mm, distance table to ram: 3,500 mm, clearance between the columns: 3,500 mm, oil tank capacity: 400 l, total length: 4,500 mm, total width: 2,000 mm, total height: 2,650 mm, overall weight: 12 kg, Equipment: CE marking, safety light barrier, High-end electro hydraulic servo system, upper slider controller by the full loop synchronization. Main servo motor guaranteed high efficiency, lower noise, energy saving. Mechanical compensation on crowning of worktable and deformation compensation on throat, ensuring bending strength and precision. Qualified accessories used to ensure press brake’s long-term stability running. Ball screw and linear guide adopted to ensure accurate and fast backgauge. Movable front support helps with bending convenience. 2D and 3D multifunctional CNC system from Delem and Cybelec. Equipped with side guards and closed rear guards. 8+1 axis/6+1 axis control European technician service, installation, training No. Name Parameter Unit 1 Nominal force 1600 KN 2 Worktable length 4000 mm 3 Worktable height 850 mm 4 Distance between vertical 3500 mm 5 Stroke 250 mm 6 Equipping die height 500 mm 7 Throat depth 400 mm 8 Control axes 8+1 Axes Y1, Y2, X1, X2, R1, R2, Z1, Z2+V 9 Y axis working speed Quick down 160 mm/s Working 10 mm/s Return 150 mm/s 10 Y axis repeat position accuracy ±0.01 mm 11 Main servo motor Power 18 KW Brand INOVANCE Speed 1500r/min 12 Work piece Precision Straightness 0.3 mm/m Angle ±30’ /m 13 Back gauge X axis Stroke 600 mm Max. speed 200 mm/s Repeat position accuracy ±0.02 mm 14 Back gauge R axis Stroke 200 mm Max. speed 150 mm/s Repeat position accuracy ±0.05 mm 15 Dimension (Approximate) Length 4000 mm Width 1900 mm Height 2600 mm 16 Weight(Approximate) 10500 Kg No. Parts Name Brand Brand Location Remarks Iisdpfx Ajy U Hmgohyeh 1 Main servo motor INOVANCE China 2 Servo motor and drive INOVANCE China 3 Main Electrics Schneider France 4 Oil Cylinder HEYAN China TOP BRAND 5 Seal ring NOK Japan 6 Hydraulic valve & Filter Rexroth BOSCH Germany 7 Pump Hawe Germany 8 Controller DA69T Netherlands 9 Toolings Cnstamp 10 Ball screw Hiwin China Taiwan 11 Guide rail Hiwin China Taiwan 12 Grating ruler GIVI ITALY 13 Footswitch Enchi China 14 Stop finger with linear guide YES 15 Crowing table Motorized 16 Front laser protection LNTECH CE standard 17 Side and Back doors with limit switch Schneider CE standard

Condition: excellent (used), For sale: an industrial KSB ETABLOC GN 40-160/402 centrifugal pump with a 4.6 kW electric motor. Pump specifications: • Manufacturer: KSB • Model: ETABLOC GN 40-160/402 • Design: GN11 • Pump serial number: 4-925-237868/1 • Flow rate: 7.5–32.5 m³/h • Head: 35.8–32.5 m • Pump speed: 2900 rpm • Year of manufacture: 2000 Iiodez Snubspfx Ahysh Motor specifications: • Motor type: QU FA 112M2A-60 • Motor serial number: 146249 RU • Power: 4.6 kW • Power supply: three-phase • Frequency: 50 Hz • Voltage: 380–420/660–725 V • Current: 7.8–7.6/4.5–4.4 A • Speed: 2850 rpm • cos φ: 0.91 • Protection class: IP55 • Insulation class: F • Operating mode: S1 • Pump weight: 57 The pump is used and is in the condition shown in the pictures. Normal signs of use and storage are visible.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 146 h, load capacity: 2,000 kg, lifting height: 4,500 mm, free lift: 1,210 mm, fuel type: electric, mast type: triplex, construction height: 2,160 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 Fork width: 100 mm Fork thickness: 40 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Electromechanical Condition: Like new Technical condition: very good Front tire type: Superelastic Front tire size: 6.50-10 Rear tire type: Superelastic Rear tire size: 5.00-8 Battery voltage: 48V Battery capacity: 500Ah Isdpfx Ahjtl Hzdoyeih Battery manufacturer: GNB Battery year of manufacture: 2023 Side shifter, 3rd valve, 4th valve, rear work light, front work light, overhead guard, windshield, load guard, full free lift, safety light, multi-directional control lever, single-pedal operation.

Condition: excellent (used), For sale: a used KSB ETABLOC-G 32-160/302.2 industrial centrifugal pump with a 3 kW electric motor. The pump has been inspected and is in full working order. It is in used condition, with visible signs of wear, paint chipping, and localized surface corrosion. The detailed condition of the unit is shown in the photos. Pump technical specifications: Manufacturer: KSB Model: ETABLOC-G 32-160/302.2 Serial number: Flow rate: 4–29.3 m³/h Iedpfx Ahsz Snvteyeih Head: 36.3–23 m Rotational speed: 2900 rpm Year of manufacture: 1990 Pump weight: 42 kg Motor technical specifications: Manufacturer: KSB Type: ZKA 100L2 Identification number: 0533496 Motor number: 585957 Power: 3 kW Power supply: three-phase Voltage: 380/660 V Current: 6.3/3.6 A Frequency: 50 Hz Rotational speed: 2860 rpm Protection class: IP54 Insulation class: B cos φ: 0.89

Condition: used, Model: HSM V-press 1160 plus baler Pressing force (kN): 59 Output (bales/h): 1-2 Max. bale size (mm): 1200x1100x1000-1200 Dimensions (L x W x H, mm): 1780x1150x2985 Power (kW): 4kW Weight (kg): 2300 Iisdpev Al Tiefx Ahyjh Year of manufacture: 2018-2019

Condition: ready for operation (used), Siemens 1FT3066-0AF61-9 - Z Permanent Magnet Motor SN:EC283231601004, Z= A22, G45: holding brake installed, G51: preparation for encoder system, used, normal signs of use, 100% functional, scope of delivery as per photos Isdpfx Asufcfcehyeih

Condition: new, *Technical standard specification: Heating capacity: 9 kW Cooling capacity: 50 kW medium: water up to 160°C Max. external volume: 16 ltr at 160°C Iedpfjftm Hrsx Ahyeih max. Flow rate 57l/min  max. Delivery pressure 6,0 bar Dimension L x W x H 780 x 305 x 705 mm Weight approx. 80 kg HIGHLIGHTS EQUIPMENT: - Smart Controller Plus 7" touch / 4.0 capable - Flow measurement, adjustable flow alarms - Return temperature display - Frequency converter for pump speed control with automatic mode for energy-optimised operation, or adjustable flow rate (in the operating range of the temperature control system) - Electronic pressure transducer in the flow - Interface via 9-pin D-Sub connector 20mA/TTY - Connection for external temperature sensor PT 100 for measuring and displaying the mould temperature - Continuous bypass of the heat exchanger with a 3-way valve to reduce deposits in the heat exchangers - More powerful pump, hydraulic parts made of VA, magnetically coupled - Tool emptying by suction - Booster pump for tool filling at high temperatures - Filling via cooling water can be switched to separate filling - SSR for heating control - IP54 splash water protection Visit our website for more details or for other performance classes. *This unit is compliant with European Directives. Other directives and standards are only complied with if stated in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, power: 34.3 kW (46.63 HP), input voltage: 460 V, input frequency: 50 Hz, input current: 43 A, type of input current: AC, Performance data & key technical specifications (derived): WHU 2500 nominal throughput approximately 430 m³/h (at 50 Hz) for the WH/WHU 2500 version. Inlet flange DN 250 ISO-K, outlet flange DN 100 ISO-K on WHU 2500. Water cooling of the motor/system. Iodpfxsx Aqa Ds Ahysih DV650S: Nominal suction capacity 650 m³/h at around 5×10⁻³ mbar ultimate vacuum.

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 50 h, load capacity: 8,000 kg, lifting height: 4,800 mm, free lift: 1,570 mm, fuel type: diesel, mast type: triplex, construction height: 2,780 mm, power: 59 kW (80.22 HP), fork carriage width: 2,240 mm, fork length: 2,400 mm, empty load weight: 12,406 kg, drive type: Diesel, Diesel forklift Load centre of gravity: 600 Fork width: 180 mm Fork thickness: 75 mm Ijdpfx Ajxr R Efjhysih ISO class: Terminal West Mast type: Triplex Gearbox: Converter Speed class: 20 Condition: New Technical condition: New Front tyres type: Superelastic Front tyres condition: New Rear tyres type: Superelastic Rear tyres condition: New Side shift, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heating, full cabin, full free lift, CE certificate, interior mirror, exterior mirror, rotating beacon, seat, front and rear camera

Condition: used, Year of construction: 2020, Transnorm curved belt conveyor left bend 90°-1400-1200 IR2500 RA2334 Technical data: Manufacturer: Transnorm Condition: good (used) Isdpfxovizt So Ahyoih conveying angle: 90° nominal/external width (NB): 1400 mm belt width (GB): 1200 mm innerradius (IR): 2500 mm overall height (BH): 260 mm motor height (MH): 450 mm Motor type: SEW gear motor Electrical Data: 380-500 V, 0,55 kW Conveying speed: contact us for an individual convoying speed Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2006, Transnorm spiral helix belt curve conveyor left 90°-825-600 IR600 RA2401 Technical data: Type designation: belt curve conveyor TS 1600-105 Helix frame width (NB): 825 mm belt width (GuB): 600 mm overall height (BH): 210 mm inner radius (IR): 600 mm Conveying angle: 90° degrees (coiled 260 mm rising) Incline: 260 mm / 90° = 1040 mm / 360° Support feet: optionally available Conveying speed (v m/s): 0.4 Drive: SEW gearmotor Electrical data: 50Hz V380-500, kW 0.55 / S1 Belt: double layer, green, smooth, KT106 (wear see pictures) year of construction: 2006 Optionally available: Supports Side guide one and both sides frequenzy converter for steples speedcontroll Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Iiodpfswdz Hgjx Ahyeh Your specialist and contact for intralogistics